Add a reference to usb-drd.yaml, in order to:
- extend possible supported properties
- avoid duplicated definitions of standard properties
Remove definitions for dr_mode and usb-role-switch standard properties.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/1634133425-25670-2-git-send-email-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This updates bindings for MT7986 pinctrl driver. The
difference of pinctrl between mt7986a and mt7986b is that pin-41 to
pin-65 do not exist on mt7986b
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211022124036.5291-2-sam.shih@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This describes the new binding which allows to call a reset driver from
the pinctrl-microchip-sgpio driver.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211018085754.1066056-2-horatiu.vultur@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds an optional mdio bus child node. If present, the mac will
look for PHYs there instead of directly under the top-level node. This
eliminates any ambiguity about whether child nodes are PHYs, and allows
the MDIO bus to contain non-PHY devices.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
7712 includes a GENETv5 adapter with an on-chip 10/100 16nm Ethernet PHY
which requires us to document that controller's integration specifically
for proper driver keying.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
New device support
* adrf6780 microwave upconverter.
- New driver for this interesting device including bindings.
Features
* lite-on ltr501
- Add dt-bindings including vendor ID and of_device_id table.
- Add regulator support.
* sensiron,scd4x
- Add reporting of channel scale.
Cleanups including fixes for things in this cycle
* Tree wide: Another set of dev_err_probe() introductions to reduce
noise in logs when deferred probing is needed and provide more debug
info. Devices included this time:
- amlogic,meson_saradc
- capella,cm3605
- fsl,imx7d
- maxim,max1118
- maxim,max1241
- nxp,lpc18xx
- qcom,pm8xxxx-xoadc
- rockchip,saradc
- sharp,gp2ap002
- sterricson,ab8500
- ti,ads7950
* core - iio:buffer
- Fix a path where a ret value is not intialized.
* channel-mux
- Add support to mux core subsystem for a settling delay and use
it in the iio-channel-mux driver.
- Fix a few dt binding warnings.
* nxp,lpc18xx
- Convert to devm_ functions for all of probe and drop remove()
* st,lsm6dsx
- Suppress a warning due to lack of handling of an enum *_MAX entry
that is just there to get the size.
* st,stm32-adc
- Add generic channel binding, deprecating the old approach.
- Add nvmem support to get calibration data for the vrefint channel and
use it to perform such calibration.
- Add a binding for sample-time to the generic channel description as it
can be per channel.
* ti,adc128s052
- Use devm_ managed functions and drop remove()
* vti,sca3000
- Use sign_extend32() rather than opencoding.
* xilinx,xadc
- Drop irq field from state structure as now just used in probe.
-----BEGIN PGP SIGNATURE-----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=XWvW
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.16b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
2nd set of IIO new driver, cleanups and features for the 5.16 cycle
New device support
* adrf6780 microwave upconverter.
- New driver for this interesting device including bindings.
Features
* lite-on ltr501
- Add dt-bindings including vendor ID and of_device_id table.
- Add regulator support.
* sensiron,scd4x
- Add reporting of channel scale.
Cleanups including fixes for things in this cycle
* Tree wide: Another set of dev_err_probe() introductions to reduce
noise in logs when deferred probing is needed and provide more debug
info. Devices included this time:
- amlogic,meson_saradc
- capella,cm3605
- fsl,imx7d
- maxim,max1118
- maxim,max1241
- nxp,lpc18xx
- qcom,pm8xxxx-xoadc
- rockchip,saradc
- sharp,gp2ap002
- sterricson,ab8500
- ti,ads7950
* core - iio:buffer
- Fix a path where a ret value is not intialized.
* channel-mux
- Add support to mux core subsystem for a settling delay and use
it in the iio-channel-mux driver.
- Fix a few dt binding warnings.
* nxp,lpc18xx
- Convert to devm_ functions for all of probe and drop remove()
* st,lsm6dsx
- Suppress a warning due to lack of handling of an enum *_MAX entry
that is just there to get the size.
* st,stm32-adc
- Add generic channel binding, deprecating the old approach.
- Add nvmem support to get calibration data for the vrefint channel and
use it to perform such calibration.
- Add a binding for sample-time to the generic channel description as it
can be per channel.
* ti,adc128s052
- Use devm_ managed functions and drop remove()
* vti,sca3000
- Use sign_extend32() rather than opencoding.
* xilinx,xadc
- Drop irq field from state structure as now just used in probe.
* tag 'iio-for-5.16b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (36 commits)
dt-bindings: iio: frequency: add adrf6780 doc
iio: frequency: adrf6780: add support for ADRF6780
iio: chemical: scd4x: Add a scale for the co2 concentration reading
dt-bindings: iio: io-channel-mux: allow duplicate channel, labels
dt-bindings: iio: io-channel-mux: add optional #io-channel-cells
iio: adc: adc128s052: Simplify adc128_probe()
iio: multiplexer: iio-mux: Support settle-time-us property
dt-bindings: iio: io-channel-mux: Add property for settle time
mux: add support for delay after muxing
iio: adc: stm32-adc: use generic binding for sample-time
iio: adc: stm32-adc: add vrefint calibration support
iio: adc: stm32-adc: add support of internal channels
iio: adc: stm32-adc: add support of generic channels binding
iio: adc: stm32-adc: split channel init into several routines
dt-bindings: iio: stm32-adc: add nvmem support for vrefint internal channel
dt-bindings: iio: stm32-adc: add generic channel binding
iio: accel: sca3000: Use sign_extend32() instead of opencoding sign extension.
iio: xilinx-xadc: Remove `irq` field from state struct
iio: imu: st_lsm6dsx: Avoid potential array overflow in st_lsm6dsx_set_odr()
iio: light: gp2ap002: Make use of the helper function dev_err_probe()
...
As these are very late in the 5.15 cycle and non are particularly urgent,
they can wait for the merge window.
Key element in this set is Yang Yingliang has identified a number of
issues in error paths introduced recently when we added multiple
buffer support.
Other fixes:
* adi,ad5662
- Fix handling of i2c_master_send() return value.
* adi,ad5766
- Fix a wrong dt-property name that indicated wrong units and
did not mach the bindings.
- Associated 'fix' of the bindings example to have a possible scale.
* st,pressure-spi
- Add some missing entries to the spi_device_id table to ensure
auto-loading works.
* ti,tsc2046
- Fix a backwards comparison leading to a false dev_warn
-----BEGIN PGP SIGNATURE-----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=jYCH
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-5.16a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
First set of IIO fixes for the 5.16 cycle
As these are very late in the 5.15 cycle and non are particularly urgent,
they can wait for the merge window.
Key element in this set is Yang Yingliang has identified a number of
issues in error paths introduced recently when we added multiple
buffer support.
Other fixes:
* adi,ad5662
- Fix handling of i2c_master_send() return value.
* adi,ad5766
- Fix a wrong dt-property name that indicated wrong units and
did not mach the bindings.
- Associated 'fix' of the bindings example to have a possible scale.
* st,pressure-spi
- Add some missing entries to the spi_device_id table to ensure
auto-loading works.
* ti,tsc2046
- Fix a backwards comparison leading to a false dev_warn
* tag 'iio-fixes-for-5.16a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: buffer: Fix memory leak in iio_buffers_alloc_sysfs_and_mask()
iio: adc: tsc2046: fix scan interval warning
iio: core: fix double free in iio_device_unregister_sysfs()
iio: core: check return value when calling dev_set_name()
iio: buffer: Fix memory leak in iio_buffer_register_legacy_sysfs_groups()
iio: buffer: Fix double-free in iio_buffers_alloc_sysfs_and_mask()
iio: buffer: Fix memory leak in __iio_buffer_alloc_sysfs_and_mask()
iio: buffer: check return value of kstrdup_const()
iio: dac: ad5446: Fix ad5622_write() return value
Documentation:devicetree:bindings:iio:dac: Fix val
drivers: iio: dac: ad5766: Fix dt property name
iio: st_pressure_spi: Add missing entries SPI to device ID table
The Nexus 4 (mako) was accidentally described as a Asus device, while it's LG.
Fixes: 9304af37d0 ("dt-bindings: arm: qcom, add missing devices")
Signed-off-by: David Heidelberg <david@ixit.cz>
[bjorn: Updated commit message, per suggestion from Konrad Dybcio]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020001327.37490-1-david@ixit.cz
One board version (dk01.1-c1) didn't have set device compatible,
so let's list it.
Signed-off-by: David Heidelberg <david@ixit.cz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211009193102.76852-1-david@ixit.cz
In order to avoid having prefixes for multiple internal divisions of LG
use the "lg" prefix instead of "lge".
Fixes: 21f3cbf693 ("dt-bindings: arm: qcom: Document APQ8026 SoC binding")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: David Heidelberg <david@ixit.cz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210928203815.77175-1-luca@z3ntu.xyz
Since MSM8916 is an ARM v8 64-bit SoC the CPU cores are normally booted
using "psci" or "spin-table". Unfortunately, some devices come with signed
32-bit-only firmware without ARM64 and PSCI support. This setup is easy to
support since it's very similar to older 32-bit only Qualcomm SoCs
(e.g. MSM8226) and only requires adding a few new definitions to already
existing drivers.
Document the qcom,msm8916-smp enable-method. It is actually just an alias
of qcom,msm8226-smp since it should be implemented identically.
The enable-method is only valid on ARM32 and must not be used on ARM64.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004204955.21077-8-stephan@gerhold.net
Document the qcom,msm8916-saw2-v3.0-cpu compatible that is needed
for cpuidle for MSM8916 on some devices with signed firmware which
is only capable of booting ARM32 kernels without PSCI.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004204955.21077-10-stephan@gerhold.net
Add binding documentation for Fairphone 4 smartphone which is based on
Snapdragon 750G (sm7225).
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007212444.328034-10-luca@z3ntu.xyz
Second set of patches for v5.16 and this time we have a big one. We
have the new Realtek driver rtw89 with over 90 kLOC and also over 150
patches for mt76. ath9k also got few new small features. And the usual
cleanups and fixes all over.
Major changes:
rtw89
* new Realtek 802.11ax driver
* supports Realtek 8852AE 802.11ax 2x2 chip
ath9k
* add option to reset the wifi chip via debugfs
* convert Device Tree bindings to the json-schema
* support Device Tree ieee80211-freq-limit property to limit channels
mt76
* mt7921 aspm support
* mt7921 testmode support
* mt7915 LED support
* mt7921 6GHz band support
* support for eeprom data in DT
* mt7915 TWT support
* mt7921s SDIO support
-----BEGIN PGP SIGNATURE-----
iQFJBAABCgAzFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmFybvwVHGt2YWxvQGNv
ZGVhdXJvcmEub3JnAAoJEG4XJFUm622b8VoH/ikpKrYdhCwEHwaRHEiieejhD1w+
kvUhiQP/oL7q/4WVUzEnzv5BWQm1D7gHMmVvSdfjfdPuw7F085p6rQDCs99RlMo6
pUv6VllvuZa8XpIrQzdWbXbWv041cQA97wS5QNeEfiIvlwzw48Sfj2ANgPHRJy5a
z93ZhOeS5VL1h+1ki6uuGS0MoOaNhzPazb3kH7U2QkuuiP5BTvUw8nW9sQIaBEEg
UzdEzLjwhbZJtmIFs4dAkOKX2+ANrS09Zl0c9530ShwZB4RXTESv+OybQrcYNBUw
2RlGT0g8LYX7QJq/hJpJuylH7s/WrMZVDo07NBbfyOc2R/bi7R54S8zBInI=
=tjnh
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-2021-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.16
Second set of patches for v5.16 and this time we have a big one. We
have the new Realtek driver rtw89 with over 90 kLOC and also over 150
patches for mt76. ath9k also got few new small features. And the usual
cleanups and fixes all over.
Major changes:
rtw89
* new Realtek 802.11ax driver
* supports Realtek 8852AE 802.11ax 2x2 chip
ath9k
* add option to reset the wifi chip via debugfs
* convert Device Tree bindings to the json-schema
* support Device Tree ieee80211-freq-limit property to limit channels
mt76
* mt7921 aspm support
* mt7921 testmode support
* mt7915 LED support
* mt7921 6GHz band support
* support for eeprom data in DT
* mt7915 TWT support
* mt7921s SDIO support
* tag 'wireless-drivers-next-2021-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (213 commits)
zd1201: use eth_hw_addr_set()
wl3501_cs: use eth_hw_addr_set()
ray_cs: use eth_hw_addr_set()
...
====================
Link: https://lore.kernel.org/r/20211022075845.0E679C4360D@smtp.codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Xylon LogiCVC is a display controller implemented as programmable
logic in Xilinx FPGAs.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210914200539.732093-2-paul.kocialkowski@bootlin.com
This series includes the patches to add basic support for new UniPhier NX1
SoC. NX1 SoC also has the same kinds of controls as the other UniPhier
SoCs.
Kunihiko Hayashi (2):
dt-bindings: regulator: uniphier: Add binding for NX1 SoC
regulator: uniphier: Add USB-VBUS compatible string for NX1 SoC
.../devicetree/bindings/regulator/socionext,uniphier-regulator.yaml | 1 +
drivers/regulator/uniphier-regulator.c | 4 ++++
2 files changed, 5 insertions(+)
--
2.7.4
Add the prefix for ASIX Electronics Corporation.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the Holtek HT16K33 LED controller Device Tree bindings with an
LED subnode, conforming to the standard LED bindings.
This allows the user to exert more control, like specifying LED color,
function, and/or trigger, to extend LED functionality beyond a simple
display backlight.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The Holtek HT16K33 LED controller is not only used for driving
dot-matrix displays, but also for driving segment displays.
Document compatible values for the Adafruit 7-segment[1] and
14-segment[2] FeatherWing expansion boards with red displays. According
to the schematics, all other Adafruit 7-segment and 14-segment display
backpack and FeatherWing expansion boards (including bare boards and
boards fitted with displays) are compatible with these two boards.
[1] https://www.adafruit.com/product/3108
[2] https://www.adafruit.com/product/3130
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
MSM Mobile Display Subsystem (MDSS) encapsulates sub-blocks
like DPU display controller, DSI, EDP etc. Add required DPU
device tree bindings for SC7280.
Signed-off-by: Krishna Manikandan <quic_mkrishn@quicinc.com>
Changes in v2:
- Drop target from description (Stephen Boyd)
- Drop items from compatible (Stephen Boyd)
- Add clock names one per line for readability (Stephen Boyd)
- Use correct indendation (Stephen Boyd)
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1634738333-3916-1-git-send-email-quic_mkrishn@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Conversion of text binding for Adreno GPU to the YAML format.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211017144350.70295-1-david@ixit.cz
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add device tree bindings for the ADRF6780 Upconverter.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20211021113244.56936-2-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is needed since an empty channel label is used to indicate an
unused channel, and there can be more that one of those.
Fixes the following problem reported by dtbs_check:
envelope-detector-mux: channels: ['', '', 'sync-1', 'in', 'out', 'sync-2', 'sys-reg', 'ana-reg'] has non-unique elements
arch/arm/boot/dts/at91-tse850-3.dt.yaml
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Needed for in-kernel use of the child channels of the mux.
Fixes problems like this, reported by dtbs_check:
adc0mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml
Suggested-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Hardware may require some time for the muxed analog signals to settle
after the muxing is changed. Allow this time to be specified in the
devicetree.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20211007134641.13417-3-vincent.whitchurch@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a schema description for the Venus video decoder/encoder IP
in SDM660.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Document the properties with regulator supplies for bucks and LDOs. At
least one board uses it (Exynos5250 Arndale).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211008114024.135335-1-krzysztof.kozlowski@canonical.com
Convert the MFD part of Samsung S5M8767 PMIC to DT schema format.
Previously the bindings were mostly in mfd/samsung,sec-core.txt.
Since all of bindings for Samsung S2M and S5M family of PMICs were
converted from mfd/samsung,sec-core.txt to respective dtschema file,
remove the former one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211008113931.134847-6-krzysztof.kozlowski@canonical.com
Convert the MFD part of Samsung S2MPA01 PMIC to DT schema format.
Previously the bindings were mostly in mfd/samsung,sec-core.txt.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211008113931.134847-5-krzysztof.kozlowski@canonical.com
Convert the MFD part of Samsung S2MPS11/S2MPS13/S2MPS14/S2MPS15/S2MPU02
family of PMICs to DT schema format. Previously the bindings were
mostly in mfd/samsung,sec-core.txt.
The conversion copies parts of description from existing bindings
therefore the license is not changed from GPLv2.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211008113931.134847-4-krzysztof.kozlowski@canonical.com
Tagged to allow further bindings to rely on these.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmFgkpYTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0OPnB/9M7HLzuTV7mkG0buI1vIPDjuSCWsr/
TZ9IuZIy0OmtdcXq9F0VyRq6wy6bVMXVSlrlFQLnrPLFW1/MIqeyPmLJyqwKVYh/
lyrAaHfeKck2S2ususisudBr/Qkg0ZrEX2f1eLC03xBnBEOy3Nl71s/HxbO9n4yt
ZAUk/1/UlmbhQKNlNgMtfXuXtLCGm3GRL30jb4nb/hGj/8Xb0ESmnRmkmZnVi/+H
DgHGHLDeK3Y5ntQx8IwbrPFimlvAGVgfU/ruf7Z6zmpuW2tKKcLE7ZAR8DG5ZRhw
W3WPq6YYUzAhyxgY0U2iO6wrL5rKvo65CbGOvpk9RsCYk2GxQS6BqHWX
=P4cy
-----END PGP SIGNATURE-----
Merge tag 'tags/s2m_s5m_dtschema' into tb-mfd-from-regulator-5.16
regulator/clock: Convert the s2m and s5m DT bindings to schema
Tagged to allow further bindings to rely on these.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Allow building the reset-brcmstb-rescal driver as module, add reset
lines for the Uniphier PXs3 audio and video input subsystems and
bindings for the Uniphier NX1 SoC, and add lan966x switch reset support
to the reset-microchip-sparx5 driver.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCYXBBkBcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwCF/AQDzczjKGzRt7UT5nGCRFs6cxI5R
QsTnpRTIcBfxGFrKAQEAvagsMyYOZgadazUZ1pWm8VfZ5yyVDCkR4mPtXy6DXAA=
=hBbU
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=L2UE
-----END PGP SIGNATURE-----
Merge tag 'reset-for-v5.16' of git://git.pengutronix.de/pza/linux into arm/drivers
Reset controller updates for v5.16
Allow building the reset-brcmstb-rescal driver as module, add reset
lines for the Uniphier PXs3 audio and video input subsystems and
bindings for the Uniphier NX1 SoC, and add lan966x switch reset support
to the reset-microchip-sparx5 driver.
* tag 'reset-for-v5.16' of git://git.pengutronix.de/pza/linux:
reset: mchp: sparx5: Extend support for lan966x
dt-bindings: reset: Add lan966x support
reset: uniphier: Add NX1 reset support
dt-bindings: reset: uniphier: Add NX1 reset control binding
reset: uniphier: Add audio system and video input reset control for PXs3
reset: Allow building Broadcom STB RESCAL as module
Link: https://lore.kernel.org/r/96e686f78f0e42bad666df5ec0cbcb2dcdc270a3.camel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A series of changes to update the gpmc related bindings to yaml
format, and a few non-urgent dts fixes.
-----BEGIN PGP SIGNATURE-----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=2byI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=mJMK
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.16/gpmc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Changes for omap gpmc bindings and devicetree files for v5.16
A series of changes to update the gpmc related bindings to yaml
format, and a few non-urgent dts fixes.
* tag 'omap-for-v5.16/gpmc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap: fix gpmc,mux-add-data type
ARM: dts: omap: Fix boolean properties gpmc,cycle2cycle-{same|diff}csen
dt-bindings: memory-controllers: ti,gpmc: Convert to yaml
dt-bindings: mtd: ti,gpmc-onenand: Convert to yaml
dt-bindings: mtd: ti,gpmc-nand: Convert to yaml
dt-bindings: memory-controllers: Introduce ti,gpmc-child
dt-bindings: net: Remove gpmc-eth.txt
dt-bindings: mtd: Remove gpmc-nor.txt
Link: https://lore.kernel.org/r/pull-1634280279-284035@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Setting DT_SCHEMA_FILES allows the user to restrict the
"dt_binding_check" make target to a specified set of DT binding files.
However, yamllint is still run on all available files, which not only
takes time, but also outputs warnings for other binding files the
developer is not interested in.
Fix this by renaming "find_cmd" to "find_all_cmd", introducing a new
"find_cmd" to only return the files specified by DT_SCHEMA_FILES (if
present), and using the latter for yamllint and dt-doc-validate.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/174ab1d791b7bc65f3b0f11b72be13af1748c731.1634551582.git.geert+renesas@glider.be
[robh: Also use only DT_SCHEMA_FILES for dt-doc-validate]
Signed-off-by: Rob Herring <robh@kernel.org>
Use xargs sharding like "chk_bindings" does, to parallelize the
execution of yamllint.
This reduces the yamllint execution time from ca. 21 to 5 seconds on
i7-8700K.
Suggested-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c68bdbdf3112c4658e0748c8fc51959e69fbae2e.1634551582.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
* various bugfixes
* endian fixes
* mt7921 aspm support
* cleanup
* mt7921 testmode support
* rate handling fixes
* tx status fixes/improvements
* mt7921 power management improvements
* mt7915 LED support
* DBDC fixes
* mt7921 6GHz support
* support for eeprom data in DT
* mt7915 TWT support
* mt7915 txbf + MU-MIMO improvements
-----BEGIN PGP SIGNATURE-----
Comment: GPGTools - http://gpgtools.org
iEYEABECAAYFAmFv4F4ACgkQ130UHQKnbvWiCQCbBaVvAjHfJdW8eJrqk7GCh64v
qo8An3OrUINp5qzewe+F/vlLoJGNfCM0
=ZkbS
-----END PGP SIGNATURE-----
Merge tag 'mt76-for-kvalo-2021-10-20' of https://github.com/nbd168/wireless
mt76 patches for 5.16
* various bugfixes
* endian fixes
* mt7921 aspm support
* cleanup
* mt7921 testmode support
* rate handling fixes
* tx status fixes/improvements
* mt7921 power management improvements
* mt7915 LED support
* DBDC fixes
* mt7921 6GHz support
* support for eeprom data in DT
* mt7915 TWT support
* mt7915 txbf + MU-MIMO improvements
# gpg: Signature made Wed 20 Oct 2021 12:24:46 PM EEST
# gpg: using DSA key D77D141D02A76EF5
# gpg: Good signature from "Felix Fietkau <nbd@nbd.name>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 75D1 1A7D 91A7 710F 4900 42EF D77D 141D 02A7 6EF5
A more recent version of the am3359 ADC is available on certain SoCs of
the am437x family. This IP has evolved a little bit and deserves its own
compatible.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-8-miquel.raynal@bootlin.com
A more recent version of the am3359 ADC/Touchscreen controller is
available on certain SoCs of the am437x family. This IP has evolved a
little bit and deserves its own compatible.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-7-miquel.raynal@bootlin.com
Now that the three hardware peaces described in this file have been
translated in yaml in 3 dedicated files (MFD, touchscreen controller and
ADC) it is time to remove this text file.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-6-miquel.raynal@bootlin.com
This ADC was already described in a text file also containing an MFD
description an a touchscreen description:
Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
Let's add a proper description for this hardware.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-5-miquel.raynal@bootlin.com
This touchscreen controller is already described in a text file:
Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
After introducing a proper description of the MFD, this is the second
step. The file cannot be removed yet as it also contains an ADC
description.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-4-miquel.raynal@bootlin.com
There is a very light description of this MFD in a text file dedicated
to a touchscreen controller (which is one of the two children of the
MFD). Here is now a complete yaml description.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211015081506.933180-3-miquel.raynal@bootlin.com
Convert the Texas Instruments serial-attached bluetooth Device Tree
binding documentation to json-schema.
Add missing max-speed property.
Update the example.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: David Lechner <david@lechnology.com>
Link: https://lore.kernel.org/r/c1814db9aff7f09ea41b562a2da305312d8df2dd.1634646975.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
The Texas Instruments Wilink 6/7/8 (wl12xx/wl18xx) Wireless LAN
Controllers can be connected via SPI or via SDIO.
Convert the two Device Tree binding documents to json-schema, and merge
them into a single document.
Add missing ti,wl1285 compatible value.
Add missing interrupt-names property.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/23a2fbc46255a988e5d36f6c14abb7130480d200.1634646975.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Add support of nvmem. This allows to retrieve calibration data from OTP
for vrefint internal channel.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211014131228.4692-3-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add ADC generic channel binding. This binding should
be used as an alternate to legacy channel properties
whenever possible.
ADC generic channel binding allows to identify supported
internal channels through the following reserved label names:
"vddcore", "vrefint" and "vbat".
This binding also allows to set a different sampling time
for each channel.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211014131228.4692-2-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a schema validator to nxp,sja1105.yaml and to dsa.yaml for explicit
MAC-level RGMII delays. These properties must be per port and must be
present only for a phy-mode that represents RGMII.
We tell dsa.yaml that these port properties might be present, we also
define their valid values for SJA1105. We create a common definition for
the RX and TX valid range, since it's quite a mouthful.
We also modify the example to include the explicit RGMII delay properties.
On the fixed-link ports (in the example, port 4), having these explicit
delays is actually mandatory, since with the new behavior, the driver
shouts that it is interpreting what delays to apply based on phy-mode.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since a switch is basically a bunch of Ethernet controllers, just
inherit the common schema for one to get stronger type validation of the
properties of a port.
For example, before this change it was valid to have a phy-mode = "xfi"
even if "xfi" is not part of ethernet-controller.yaml, now it is not.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All ports require either a phy-handle or a fixed-link, and port 3 in the
example didn't have one. Add it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ath.git patches for v5.16. Major changes:
ath9k
* add option to reset the wifi chip via debugfs
* convert Device Tree bindings to the json-schema
* support Device Tree ieee80211-freq-limit property to limit channels
EEPROM data for mt76 can be embedded into device-tree as an array.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Highlights:
----------
- MPU:
- ST boards:
- Add new stm32mp135f-dk board. It embedds new STM32MP135 SoC,
with 512 MB of DDR3. Several connections are available on this
board:
4*USB2.0, 1*USB2.0 typeC DRD, SDcard, 2*RJ45, HDMI,
Combo Wifi/BT, ...
Only SD card, uart4 (console) and watchdog IPs are enabled in
this tag.
- Change IRQ level for STUSB1600 on DKx boards.
- Fix SAI subclocks range.
- Add ck_usb0_48m clock in USB OHCI node device to match with
STM32MP15 datasheet.
- DH boards:
- Reduce DHCOR SPI NOR frequency to 50 MHz to avoid sporadic issues.
- Fix SAI pin muxing.
- Odyssey:
- Set DCMI pins.
-----BEGIN PGP SIGNATURE-----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=zn1y
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=X4fu
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT for v5.16, round 1
Highlights:
----------
- MPU:
- ST boards:
- Add new stm32mp135f-dk board. It embedds new STM32MP135 SoC,
with 512 MB of DDR3. Several connections are available on this
board:
4*USB2.0, 1*USB2.0 typeC DRD, SDcard, 2*RJ45, HDMI,
Combo Wifi/BT, ...
Only SD card, uart4 (console) and watchdog IPs are enabled in
this tag.
- Change IRQ level for STUSB1600 on DKx boards.
- Fix SAI subclocks range.
- Add ck_usb0_48m clock in USB OHCI node device to match with
STM32MP15 datasheet.
- DH boards:
- Reduce DHCOR SPI NOR frequency to 50 MHz to avoid sporadic issues.
- Fix SAI pin muxing.
- Odyssey:
- Set DCMI pins.
* tag 'stm32-dt-for-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151
ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15
ARM: dts: stm32: fix SAI sub nodes register range
ARM: dts: stm32: fix STUSB1600 Type-C irq level on stm32mp15xx-dkx
ARM: dts: stm32: set the DCMI pins on stm32mp157c-odyssey
ARM: dts: stm32: Reduce DHCOR SPI NOR frequency to 50 MHz
ARM: dts: stm32: add initial support of stm32mp135f-dk board
dt-bindings: stm32: document stm32mp135f-dk board
ARM: dts: stm32: add STM32MP13 SoCs support
Link: https://lore.kernel.org/r/9d52c3e2-a3b9-89f3-1896-7cd3560e7010@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.16, please pull the following:
- Matthew provides a set of updates to the Northstar Plus Device Tree
files to fix a number of warnings, and prepare the files to support the
addition of the Cisco Meraki MX64/MX65 wireless controller devices and
finally adds support for those boards.
- Rafal continues to provide updates to the BCM5301X Device Tree files
in order to fix warnings with the various node names, MDIO muxes and
memory nodes. He also adds support for the external switches on the
BCM53573 SoC and adds Tenda AC9 switch ports.
- Christian provides the description of the Ethernet switch ports for
the Cisco Meraki MR32 based on the 53016 SoC
- Arinc adds support for the Asus RT-AC88U device based on the BCM4709
and featuring 8 Ethernet ports over the integrated and the external
Realtek switch (not supported yet)
- Stefan adds support for the Raspberry Pi Compute Module 4 IO board and
does a number of preparatory changes to get there to the Device Tree
files before doing the actual addition
-----BEGIN PGP SIGNATURE-----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=KGAI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Ptpv
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.16/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.16, please pull the following:
- Matthew provides a set of updates to the Northstar Plus Device Tree
files to fix a number of warnings, and prepare the files to support the
addition of the Cisco Meraki MX64/MX65 wireless controller devices and
finally adds support for those boards.
- Rafal continues to provide updates to the BCM5301X Device Tree files
in order to fix warnings with the various node names, MDIO muxes and
memory nodes. He also adds support for the external switches on the
BCM53573 SoC and adds Tenda AC9 switch ports.
- Christian provides the description of the Ethernet switch ports for
the Cisco Meraki MR32 based on the 53016 SoC
- Arinc adds support for the Asus RT-AC88U device based on the BCM4709
and featuring 8 Ethernet ports over the integrated and the external
Realtek switch (not supported yet)
- Stefan adds support for the Raspberry Pi Compute Module 4 IO board and
does a number of preparatory changes to get there to the Device Tree
files before doing the actual addition
* tag 'arm-soc/for-5.16/devicetree' of https://github.com/Broadcom/stblinux: (31 commits)
arm64: dts: broadcom: Add reference to RPi CM4 IO Board
ARM: dts: Add Raspberry Pi Compute Module 4 IO Board
ARM: dts: Add Raspberry Pi Compute Module 4
dt-bindings: arm: bcm2835: Add Raspberry Pi Compute Module 4
ARM: dts: bcm283x-rpi: Move Wifi/BT into separate dtsi
dt-bindings: display: bcm2835: add optional property power-domains
ARM: dts: BCM5301X: Add DT for Asus RT-AC88U
ARM: BCM53016: MR32: get mac-address from nvmem
ARM: BCM53016: Specify switch ports for Meraki MR32
ARM: dts: BCM53573: Add Tenda AC9 switch ports
ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch
ARM: dts: BCM5301X: Specify switch ports for more devices
ARM: dts: NSP: Fix MX65 MDIO mux warnings
ARM: dts: NSP: Fix MX64/MX65 eeprom node name
ARM: dts: NSP: Fix MDIO mux node names
ARM: dts: NSP: Fix mpcore, mmc node names
ARM: dts: NSP: Add bcm958623hr board name to dts
ARM: dts: BCM5301X: Fix memory nodes names
ARM: dts: BCM5301X: Fix MDIO mux binding
ARM: dts: BCM5301X: Fix nodes names
...
Link: https://lore.kernel.org/r/20211013174016.831348-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Match Exynos5433 DTS with dtschema.
2. Add an Exynos Auto v9 SoC and SADK board. The Exynos Auto v9 is a
design for automotive for In-vehicle Infotainments (IVI) and Advanced
Driver-Assistance Systems (ADAS).
This pull request brings very basic support (pinctrl, UART and UFS
storage) with a development SADK (Samsung Automotive Development Kit)
board.
-----BEGIN PGP SIGNATURE-----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=MZjz
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Bj2z
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.16
1. Match Exynos5433 DTS with dtschema.
2. Add an Exynos Auto v9 SoC and SADK board. The Exynos Auto v9 is a
design for automotive for In-vehicle Infotainments (IVI) and Advanced
Driver-Assistance Systems (ADAS).
This pull request brings very basic support (pinctrl, UART and UFS
storage) with a development SADK (Samsung Automotive Development Kit)
board.
* tag 'samsung-dt64-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: add minimal support for exynosautov9 sadk board
arm64: dts: exynos: add initial support for exynosautov9 SoC
arm64: dts: exynos: add proper comaptible FSYS syscon in Exynos5433
arm64: dts: exynos: align operating-points table name with dtschema in Exynos5433
Link: https://lore.kernel.org/r/20211013162418.43072-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
MSM8916 gained some DT cleanup fixes. The Dragonboard 410c gains updated
firmware paths to the device specific firmware for modem and WiFi, to
allow these to be pushed to linux-next. The Longcheer L8150 gains extcon
support and the interrupt configuration for the accelerometer and
magnetometer are corrected.
MSM8998 gained descriptions for the multimedia clock controller and
iommu, as well as the GPU and its dedicated IOMMU. The QFPROM node is
updated to access the CRC corrected value space, the white LED (for
backlight) found in PMI8998 is described and GCC gains references to the
missing XO and sleep_clk reference clocks.
On top of this initial support for the Fxtec Pro1 QX1000 is added and
then the Sony Xperia XZ1, Xperia XZ1 Compact and the Xperia XZ Premium,
with USB, touchscreen, SDHCI, Bluetooth and vibrator supported.
The Xiaomi Mi 5 and Xiaomi Mi Note 2, based on the MSM8996 platform was
added, with support for frame buffer, GPU, audio, video encoder/decoder
and touchscreen.
The USB controller and PHY found in IPA6018 is described to provide USB
support. IPQ8074 gains a description of the SPMI controller.
The highlight on SC7180 is the introduction of the just released
"Homestar" device. CPU power coefficients are corrected based on
measurements, IMEM is described to ensure that remoteproc relocation
information is carried to post mortem debug tools and a few smaller
fixes are introduced.
The SC7280 gains QSPI, low speed (i2c/spi/uart), GPU, thermal zones,
modem, CPU topology and updated memory map.
On SDM845 the "Limits hardware" is described and increases the
throttling temperature of the hardware from ~70C to 95C, with up to 30%
improvement in benchmarks as result. Relying on hardware throttling and
thermal pressure, the CPU cooling devices are dropped.
The power for the second WiFi channel is properly described for the
Lenovo Yoga C630, to ensure they are both powered.
reboot-modes are defined for the PM660 PMIC, found in SDM630 and SDM660.
Initial support for the Snapdragon 690 (aka SM6350) is introduced, with
support for clocks, regulators, pinctrl, storage, thermal sensors, USB,
SMMU and CPUfreq. On top of this support for the Sony Xperia 10 III is
introduced.
-----BEGIN PGP SIGNATURE-----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=nWS9
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=fbG2
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 dts updates for v5.16
MSM8916 gained some DT cleanup fixes. The Dragonboard 410c gains updated
firmware paths to the device specific firmware for modem and WiFi, to
allow these to be pushed to linux-next. The Longcheer L8150 gains extcon
support and the interrupt configuration for the accelerometer and
magnetometer are corrected.
MSM8998 gained descriptions for the multimedia clock controller and
iommu, as well as the GPU and its dedicated IOMMU. The QFPROM node is
updated to access the CRC corrected value space, the white LED (for
backlight) found in PMI8998 is described and GCC gains references to the
missing XO and sleep_clk reference clocks.
On top of this initial support for the Fxtec Pro1 QX1000 is added and
then the Sony Xperia XZ1, Xperia XZ1 Compact and the Xperia XZ Premium,
with USB, touchscreen, SDHCI, Bluetooth and vibrator supported.
The Xiaomi Mi 5 and Xiaomi Mi Note 2, based on the MSM8996 platform was
added, with support for frame buffer, GPU, audio, video encoder/decoder
and touchscreen.
The USB controller and PHY found in IPA6018 is described to provide USB
support. IPQ8074 gains a description of the SPMI controller.
The highlight on SC7180 is the introduction of the just released
"Homestar" device. CPU power coefficients are corrected based on
measurements, IMEM is described to ensure that remoteproc relocation
information is carried to post mortem debug tools and a few smaller
fixes are introduced.
The SC7280 gains QSPI, low speed (i2c/spi/uart), GPU, thermal zones,
modem, CPU topology and updated memory map.
On SDM845 the "Limits hardware" is described and increases the
throttling temperature of the hardware from ~70C to 95C, with up to 30%
improvement in benchmarks as result. Relying on hardware throttling and
thermal pressure, the CPU cooling devices are dropped.
The power for the second WiFi channel is properly described for the
Lenovo Yoga C630, to ensure they are both powered.
reboot-modes are defined for the PM660 PMIC, found in SDM630 and SDM660.
Initial support for the Snapdragon 690 (aka SM6350) is introduced, with
support for clocks, regulators, pinctrl, storage, thermal sensors, USB,
SMMU and CPUfreq. On top of this support for the Sony Xperia 10 III is
introduced.
* tag 'qcom-arm64-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (99 commits)
arm64: dts: qcom: sdm630-nile: Correct regulator label name
arm64: dts: qcom: sm6125: Improve indentation of multiline properties
arm64: dts: qcom: msm8916-longcheer-l8150: Use &pm8916_usbin extcon
arm64: dts: qcom: pm8916: Add pm8941-misc extcon for USB detection
arm64: dts: qcom: pm8916: Remove wrong reg-names for rtc@6000
arm64: dts: qcom: sc7280: Update Q6V5 MSS node
arm64: dts: qcom: sc7280: Add Q6V5 MSS node
arm64: dts: qcom: sc7280: Add nodes to boot modem
arm64: dts: qcom: sc7280: Add/Delete/Update reserved memory nodes
arm64: dts: qcom: sc7280: Update reserved memory map
arm64: dts: qcom: msm8998-fxtec-pro1: Add tlmm keyboard keys
arm64: dts: qcom: msm8998-fxtec-pro1: Add Goodix GT9286 touchscreen
arm64: dts: qcom: msm8998-fxtec-pro1: Add physical keyboard leds
arm64: dts: qcom: Add support for MSM8998 F(x)tec Pro1 QX1000
arm64: dts: qcom: msm8916: Fix Secondary MI2S bit clock
arm64: dts: qcom: msm8916-longcheer-l8150: Add missing sensor interrupts
arm64: dts: qcom: sc7180: Add IMEM and pil info regions
arm64: dts: qcom: pm6150l: Add missing include
arm64: dts: qcom: sm6350: Add device tree for Sony Xperia 10 III
arm64: dts: qcom: sm6350: Add apps_smmu and assign iommus prop to USB1
...
Link: https://lore.kernel.org/r/20211012231155.1036519-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This extends the previous limited description of MSM8226 with SDHC,
UART, I2C, SCM, SMEM, RPM and basic PMIC definitions. Based on this,
initial support for the LG G Watch R smartwatch is introduced.
APQ8064 gets a couple of DT updates, one which will allow the GPU driver
to drop supporting legacy "opp tables" in the future.
DT bindings and DTS files are updated with additional compatibles, for
completeness.
-----BEGIN PGP SIGNATURE-----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=x0TI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ur86
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm DTS updates for v5.16
This extends the previous limited description of MSM8226 with SDHC,
UART, I2C, SCM, SMEM, RPM and basic PMIC definitions. Based on this,
initial support for the LG G Watch R smartwatch is introduced.
APQ8064 gets a couple of DT updates, one which will allow the GPU driver
to drop supporting legacy "opp tables" in the future.
DT bindings and DTS files are updated with additional compatibles, for
completeness.
* tag 'qcom-dts-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: arm: qcom, add missing devices
ARM: dts: qcom: msm8974: Add xo_board reference clock to DSI0 PHY
ARM: dts: qcom: fill secondary compatible for multiple boards
ARM: dts: qcom: apq8064: adjust memory node according to specs
ARM: dts: qcom: apq8064: Convert adreno from legacy gpu-pwrlevels to opp-v2
ARM: dts: qcom: Add support for LG G Watch R
dt-bindings: arm: qcom: Document APQ8026 SoC binding
ARM: dts: qcom: Add pm8226 PMIC
ARM: dts: qcom: msm8226: Add more SoC bits
dt-bindings: arm: qcom: Document SDX65 platform and boards
Link: https://lore.kernel.org/r/20211012174310.1017857-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- move dt-bindings reset controller includes to correct folder
- split PCIe node to use new format for mt2712 and mt7622
- mt8183: add audio node to chromebook devices
- mt8192: add clock controller node
-----BEGIN PGP SIGNATURE-----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=9lk3
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=nSdE
-----END PGP SIGNATURE-----
Merge tag 'v5.15-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
Biggest change is, that we have now support for a reset controller inside the
mmsys. This goes inhand with changes to the driver, that you will find in the
soc pull request.
Mediatek PCI device tree binding described the root port in a wrong. The IP
actaully implements several root complex with everyone having a single root port.
We need to fix the DT in an incompatible way to describe the HW as it is. This
also fixes a problem that no IRQ bigger then 32 could be handled.
The only public available HW that is affected by this is the BananaPi R64. I'm
not aware that there is a big user base using the upstream kernel. In this
boards PCI is only used for extension cards, so I don't expect any boot problems.
- mt8173: add reset for dsi0 to mmsys
- move dt-bindings reset controller includes to correct folder
- split PCIe node to use new format for mt2712 and mt7622
- mt8183: add audio node to chromebook devices
- mt8192: add clock controller node
* tag 'v5.15-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: dts: mt8183: Add the mmsys reset bit to reset the dsi0
arm64: dts: mt8173: Add the mmsys reset bit to reset the dsi0
dt-bindings: display: mediatek: add dsi reset optional property
dt-bindings: mediatek: Add #reset-cells to mmsys system controller
arm64: dts: mediatek: Move reset controller constants into common location
arm64: dts: mediatek: Split PCIe node for MT2712 and MT7622
arm64: dts: mt8183: add kukui platform audio node
arm64: dts: mt8183: add audio node
arm64: dts: mediatek: Add mt8192 clock controllers
Link: https://lore.kernel.org/r/1a3d63a3-c020-3319-26f6-a2ec338cc42e@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Let's add compatible values for the legacy SoCs so we can continue
deprecating omap_hsmmc in favor of sdhci-omap driver.
For omap5, we want to have a separate compatible from omap4 for the
additional features available on omap5. AFAIK ti81 can just use the
omap4 compatible.
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20211015104720.52240-2-tony@atomide.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Counter subsystem changes now sent separately.
This has been a busy cycle, so lots here and a few more stragglers to
come next week.
Big new feature in this cycle is probably output buffer support.
This has been in the works for a very long time so it's great to see
Mihail pick up the challenge and build upon his predecessors work to finally
bring this feature to mainline.
New device support
------------------
* adi,adxl313
- New driver and dt bindings for this low power accelerometer.
* adi,adxl355
- New driver and dt bindings for this accelerometer.
- Later series adds buffer support.
* asahi-kasei,ak8975
- Minor additions to driver to support ak09916
* aspeed,aspeed-adc
- Substantial rework plus feature additions to add support for the
ast2600 including a new dt bindings doc.
* atmel,at91_sama5d2
- Rework and support introduced for the sama7g5 parts.
* maxim,max31865
- New driver and bindings for this RTD temperature sensor chip.
* nxp,imx8qxp
- New driver and bindings for the ADC found on the i.MX 8QuadXPlus Soc.
* senseair,sunrise
- New driver and bindings for this family of carbon dioxide gas sensors.
* sensiron,scd4x
- New driver and bindings for this carbon dioxide gas sensor.
New features
------------
* Output buffer support. Works in a similar fashion to input buffers, but
in this case userspace pushes data into the kfifo which is then drained
to the device when a trigger occurs. Support added to the ad5766 DAC
driver.
* Core, devm_iio_map_array_register() to avoid need for
devm_add_action_or_reset() based cleanup in fully managed allocation
drivers.
* Core iio_push_to_buffers_with_ts_unaligned() function to safely handle a
few drivers where it really hard to ensure the correct data alignment in
an iio_push_to_buffers_with_timestamp() call. Note this uses a bounce
buffer so should be avoided whenever possible. Used in the ti,adc108s102,
invense,mpu3050 and adi,adis16400. This closes the last known set
of drivers with alignment issues at this interface.
* maxim,max1027
- Substantial rework to this driver main target of which was supporting
use of other triggers than it's own EOC interrupt.
- Transfer optimization.
* nxp,fxls8962af
- Threshold even support including using it as a wakeup source.
Cleanups, minor fixes etc
-------------------------
Chances of a common type to multiple drivers:
* devm_ conversion and drop of .remove() callbacks in:
- adi,ad5064
- adi,ad7291
- adi,ad7303
- adi,ad7746
- adi,ad9832
- adi,adis16080
- dialog,da9150-gpadc
- intel,mrfld_adc
- marvell,berlin2
- maxim,max1363
- maxim,max44000
- nuvoton,nau7802
- st_sensors (includes a lot of rework!)
- ti,ads8344
- ti,lp8788
* devm_platform_ioremap_resource() used to reduce boilerplate
- cirrus,ep93xx
- rockchip,saradc
- stm,stm32-dac
* Use dev_err_probe() in more places to both not print on deferred probe and
ensure a reason for the deferral is available for debug purposes.
- adi,ad8801
- capella,cm36651
- linear,ltc1660
- maxim,ds4424
- maxim,max5821
- microchip,mcp4922
- nxp,lpc18xx
- onnn,noa1305
- st,lsm9ds0
- st,st_sensors
- st,stm32-dac
- ti,afe4403
- ti,afe4404
- ti,dac7311
* Drop error returns in SPI and I2C remove() functions as they are ignored and
long term plan is to change these all over to returning void. In some cases
these patches just make it 'obvious' they always return 0 where it was the
case before but not easy to tell.
- adi,ad5380
- adi,ad5446
- adi,ad5686
- adi,ad5592r
- bosch,bma400
- bosch,bmc150
- fsl,mma7455
- honeywell,hmc5843
- kionix,kxsd9
- maxim,max5487
- meas,ms5611
- ti,afe4403
Driver specific changes
* adi,ad5770r
- Bring driver inline with documented bindings.
* adi,ad7746
- Trivial style fix
* adi,ad7949
- Express some magic values as the underlying parts via new #defines.
- Make it work with SPI controllers that don't support 14 or 16 bit messages
- Support selection of voltage reference from dt including expanding the
dt-bindings to cover this new functionality.
* adi,ad799x
- Implement selection of external reference voltage on AD7991, AD7995 and
AD7999.
- Add missing dt-bindings doc for devices supported by this driver.
* adi,adislib
- Move interrupt startup to better location in startup flow.
- Handle devices that cannot mask/unmask the drdy pin and must instead mask
at the interrupt controller. Applies to the adis16460 and adis16475 from
which we then drop equivalent code.
* adi,ltc2983
- Add support for optional reset pin.
- Fail to probe if no channels specified in dt binding.
* asahi-kasei,ak8975
- dt-binding additions of missing vid-supply regulator.
* aspeed,aspeed-adc
- Typo fix.
* fsl,mma7660
- Mark acpi_device_id table __maybe_unused to avoid build warning.
* fsl,imx25-gcq
- Avoid initializing regulators that aren't used.
* invensense,mpu3050
- Drop a dead protection against a clash with the old input driver.
* invensense,mpu6050
- Rework code to not use strcpy() and hence avoid possibility of wrong sized
buffers. Note this wasn't a bug, but the new code is a lot more readable.
- Mark acpi_device_id table __maybe_unused to avoid build warning.
* kionix,kxcjk1013
- dt-binding addition to note it supports interrupts.
* marvell,berlin2-adc
- Enable COMPILE_TEST building.
* maxim,max1027
- Avoid returning success in an error path.
* nxp,imx8qxp
- Fix warning when runtime pm not enabled via __maybe_unused.
* ricoh,rn5t618
- Use the new devm_iio_map_array_register() instead of open coding the same.
* samsung,exynos_adc
- Improve kconfig help text.
* st,lsm6dsx
- Move max_fifo_size into the fifo_ops structure where the other configuration
parameters are found.
* st,st_sensors:
- Reorder to ensure we turn the power off after removing userspace interfaces.
* senseair,sunrise
- Add missing I2C dependency.
* ti,twl6030
- Small code tidy up.
-----BEGIN PGP SIGNATURE-----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=htmG
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.16a-split-take4' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
First set of IIO new device and feature support for the 5.16 cycle
Counter subsystem changes now sent separately.
This has been a busy cycle, so lots here and a few more stragglers to
come next week.
Big new feature in this cycle is probably output buffer support.
This has been in the works for a very long time so it's great to see
Mihail pick up the challenge and build upon his predecessors work to finally
bring this feature to mainline.
New device support
------------------
* adi,adxl313
- New driver and dt bindings for this low power accelerometer.
* adi,adxl355
- New driver and dt bindings for this accelerometer.
- Later series adds buffer support.
* asahi-kasei,ak8975
- Minor additions to driver to support ak09916
* aspeed,aspeed-adc
- Substantial rework plus feature additions to add support for the
ast2600 including a new dt bindings doc.
* atmel,at91_sama5d2
- Rework and support introduced for the sama7g5 parts.
* maxim,max31865
- New driver and bindings for this RTD temperature sensor chip.
* nxp,imx8qxp
- New driver and bindings for the ADC found on the i.MX 8QuadXPlus Soc.
* senseair,sunrise
- New driver and bindings for this family of carbon dioxide gas sensors.
* sensiron,scd4x
- New driver and bindings for this carbon dioxide gas sensor.
New features
------------
* Output buffer support. Works in a similar fashion to input buffers, but
in this case userspace pushes data into the kfifo which is then drained
to the device when a trigger occurs. Support added to the ad5766 DAC
driver.
* Core, devm_iio_map_array_register() to avoid need for
devm_add_action_or_reset() based cleanup in fully managed allocation
drivers.
* Core iio_push_to_buffers_with_ts_unaligned() function to safely handle a
few drivers where it really hard to ensure the correct data alignment in
an iio_push_to_buffers_with_timestamp() call. Note this uses a bounce
buffer so should be avoided whenever possible. Used in the ti,adc108s102,
invense,mpu3050 and adi,adis16400. This closes the last known set
of drivers with alignment issues at this interface.
* maxim,max1027
- Substantial rework to this driver main target of which was supporting
use of other triggers than it's own EOC interrupt.
- Transfer optimization.
* nxp,fxls8962af
- Threshold even support including using it as a wakeup source.
Cleanups, minor fixes etc
-------------------------
Chances of a common type to multiple drivers:
* devm_ conversion and drop of .remove() callbacks in:
- adi,ad5064
- adi,ad7291
- adi,ad7303
- adi,ad7746
- adi,ad9832
- adi,adis16080
- dialog,da9150-gpadc
- intel,mrfld_adc
- marvell,berlin2
- maxim,max1363
- maxim,max44000
- nuvoton,nau7802
- st_sensors (includes a lot of rework!)
- ti,ads8344
- ti,lp8788
* devm_platform_ioremap_resource() used to reduce boilerplate
- cirrus,ep93xx
- rockchip,saradc
- stm,stm32-dac
* Use dev_err_probe() in more places to both not print on deferred probe and
ensure a reason for the deferral is available for debug purposes.
- adi,ad8801
- capella,cm36651
- linear,ltc1660
- maxim,ds4424
- maxim,max5821
- microchip,mcp4922
- nxp,lpc18xx
- onnn,noa1305
- st,lsm9ds0
- st,st_sensors
- st,stm32-dac
- ti,afe4403
- ti,afe4404
- ti,dac7311
* Drop error returns in SPI and I2C remove() functions as they are ignored and
long term plan is to change these all over to returning void. In some cases
these patches just make it 'obvious' they always return 0 where it was the
case before but not easy to tell.
- adi,ad5380
- adi,ad5446
- adi,ad5686
- adi,ad5592r
- bosch,bma400
- bosch,bmc150
- fsl,mma7455
- honeywell,hmc5843
- kionix,kxsd9
- maxim,max5487
- meas,ms5611
- ti,afe4403
Driver specific changes
* adi,ad5770r
- Bring driver inline with documented bindings.
* adi,ad7746
- Trivial style fix
* adi,ad7949
- Express some magic values as the underlying parts via new #defines.
- Make it work with SPI controllers that don't support 14 or 16 bit messages
- Support selection of voltage reference from dt including expanding the
dt-bindings to cover this new functionality.
* adi,ad799x
- Implement selection of external reference voltage on AD7991, AD7995 and
AD7999.
- Add missing dt-bindings doc for devices supported by this driver.
* adi,adislib
- Move interrupt startup to better location in startup flow.
- Handle devices that cannot mask/unmask the drdy pin and must instead mask
at the interrupt controller. Applies to the adis16460 and adis16475 from
which we then drop equivalent code.
* adi,ltc2983
- Add support for optional reset pin.
- Fail to probe if no channels specified in dt binding.
* asahi-kasei,ak8975
- dt-binding additions of missing vid-supply regulator.
* aspeed,aspeed-adc
- Typo fix.
* fsl,mma7660
- Mark acpi_device_id table __maybe_unused to avoid build warning.
* fsl,imx25-gcq
- Avoid initializing regulators that aren't used.
* invensense,mpu3050
- Drop a dead protection against a clash with the old input driver.
* invensense,mpu6050
- Rework code to not use strcpy() and hence avoid possibility of wrong sized
buffers. Note this wasn't a bug, but the new code is a lot more readable.
- Mark acpi_device_id table __maybe_unused to avoid build warning.
* kionix,kxcjk1013
- dt-binding addition to note it supports interrupts.
* marvell,berlin2-adc
- Enable COMPILE_TEST building.
* maxim,max1027
- Avoid returning success in an error path.
* nxp,imx8qxp
- Fix warning when runtime pm not enabled via __maybe_unused.
* ricoh,rn5t618
- Use the new devm_iio_map_array_register() instead of open coding the same.
* samsung,exynos_adc
- Improve kconfig help text.
* st,lsm6dsx
- Move max_fifo_size into the fifo_ops structure where the other configuration
parameters are found.
* st,st_sensors:
- Reorder to ensure we turn the power off after removing userspace interfaces.
* senseair,sunrise
- Add missing I2C dependency.
* ti,twl6030
- Small code tidy up.
* tag 'iio-for-5.16a-split-take4' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (148 commits)
iio: imx8qxp-adc: mark PM functions as __maybe_unused
iio: pressure: ms5611: Make ms5611_remove() return void
iio: potentiometer: max5487: Don't return an error in .remove()
iio: magn: hmc5843: Make hmc5843_common_remove() return void
iio: health: afe4403: Don't return an error in .remove()
iio: dac: ad5686: Make ad5686_remove() return void
iio: dac: ad5592r: Make ad5592r_remove() return void
iio: dac: ad5446: Make ad5446_remove() return void
iio: dac: ad5380: Make ad5380_remove() return void
iio: accel: mma7455: Make mma7455_core_remove() return void
iio: accel: kxsd9: Make kxsd9_common_remove() return void
iio: accel: bmi088: Make bmi088_accel_core_remove() return void
iio: accel: bmc150: Make bmc150_accel_core_remove() return void
iio: accel: bma400: Make bma400_remove() return void
drivers:iio:dac:ad5766.c: Add trigger buffer
iio: triggered-buffer: extend support to configure output buffers
iio: kfifo-buffer: Add output buffer support
iio: Add output buffer support
iio: documentation: Document scd4x calibration use
drivers: iio: chemical: Add support for Sensirion SCD4x CO2 sensor
...
Add documentation for the SCD4x carbon dioxide sensor from Sensirion.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Roan van Dijk <roan@protonic.nl>
Link: https://lore.kernel.org/r/20211008101706.755942-2-roan@protonic.nl
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The NXP i.MX 8QuadXPlus SOC a new ADC IP, so add
binding documentation for NXP IMX8QXP ADC.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210925020555.129-3-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add documentation for the Senseair Sunrise 006-0-0007 CO2 NDIR sensor.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210920135413.140310-2-jacopo+renesas@jmondi.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Driver and device-tree also use vid-supply regulator.
Fixes: 7e000fbff7 ("dt-bindings: iio: magnetometer: ak8975: convert format to yaml, add maintainer")
Signed-off-by: David Heidelberg <david@ixit.cz>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210913181949.83179-1-david@ixit.cz
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ADV7610 is another HDMI receiver chip, very similar to
the ADV7611. Tested on TinyRex BaseBoard Lite.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Qualcomm SC8180x has 2 DP controllers and 1 eDP controller, add
compatibles for these to the msm/dp binding.
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211016221843.2167329-7-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Convert the ST NCI (ST21NFCB) NFC controller to DT schema format.
Changes during bindings conversion:
1. Add a new required "reg" property for SPI binding, because SPI child
devices use it as chip-select.
2. Drop the "clock-frequency" property during conversion because it is a
property of I2C bus controller, not I2C slave device. It was also
never used by the driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211011073934.34340-7-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the ST ST21NFCA NFC controller to DT schema format.
Changes during bindings conversion:
1. Add a new required "interrupts" property, because it was missing in
the old bindings by mistake.
2. Drop the "clock-frequency" property during conversion because it is a
property of I2C bus controller, not I2C slave device. It was also
never used by the driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211011073934.34340-5-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the NXP PN532 NFC controller to DT schema format.
Drop the "clock-frequency" property during conversion because it is a
property of I2C bus controller, not I2C slave device. It was also never
used by the driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211011073934.34340-4-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the NXP NCI NFC controller to DT schema format.
Drop the "clock-frequency" property during conversion because it is a
property of I2C bus controller, not I2C slave device. It was also never
used by the driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211011073934.34340-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Elan touchpad documentation to the YAML syntax.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20211009183016.65218-1-david@ixit.cz
Signed-off-by: Rob Herring <robh@kernel.org>
The Silead GSL1680 Touchscreen Controller is supported by Linux thanks
to its device tree binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211015073006.8939-1-maxime@cerno.tech
Signed-off-by: Rob Herring <robh@kernel.org>
rtl8365mb is a new realtek-smi subdriver for the RTL8365MB-VC 4+1 port
10/100/1000M Ethernet switch controller. Its compatible string is
"realtek,rtl8365mb".
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit f07c776f6d ("arm64: dts: mediatek: Move reset controller
constants into common location") moves the reset controller headers.
However, it forgot to rename the DT example in mt8192-afe-pcm.yaml.
Renames the DT example to pass dt_binding_check.
Fixes: f07c776f6d ("arm64: dts: mediatek: Move reset controller constants into common location")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20211018101608.3818840-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update AVE binding document for UniPhier NX1 SoC.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch extends the existing file microchip,rst.yaml to support
also the lan966x. For this is added only a new compatible string.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20211018091522.1113510-2-horatiu.vultur@microchip.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Stop specifying individual interrupts properties. Use #interrupt-cells
instead as we are switching qcom,spmi-mpp and qcom,ssbi-mpp to
hierarchical IRQ setup.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211008012524.481877-18-dmitry.baryshkov@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Sony Tulip Truly NT35521 is a 5.24" 1280x720 DSI panel, which can
be found on Sony Xperia M4 Aqua phone. The backlight is managed
through DSI link.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210809051008.6172-2-shawn.guo@linaro.org
The nt35950 IC from Novatek is a Driver IC used to drive MIPI-DSI panels,
with Static RAM for content retention in command mode and also supports
video mode with VESA Frame Buffer Compression or Display Stream Compression
on single, or dual dsi port(s).
This DDIC is also capable of upscaling an input image to the panel's native
resolution, for example it can upscale a 1920x1080 input to 3840x2160 with
either bilinear interpolation or pixel duplication.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210901173127.998901-2-angelogioacchino.delregno@somainline.org
Device has interrupts support, which description was missing in the bindings.
Signed-off-by: David Heidelberg <david@ixit.cz>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210919203656.119742-1-david@ixit.cz
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add device binding documentation for Qualcomm Technologies, Inc. (QTI)
Sleep stats driver. The driver is used for displaying Sleep statistic maintained
by Always On Processor or Resource Power Manager.
Cc: devicetree@vger.kernel.org
Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1634107104-22197-2-git-send-email-mkshah@codeaurora.org
This property was only needed for a driver hack, which we can
remove. Since the bindings were not in any kernel release yet, we
are able to just drop the property instead of silently accepting
and ignoring it.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Message-Id: <20211016105354.116513-3-frattaroli.nicolas@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove redundent comments from rockchip-thermal.yaml
Sort compatibles in alphabetical order.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210930110517.14323-2-jbx6244@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The tsadc node in rk356x.dtsi has more resets defined then currently
allowed by rockchip-thermal.yaml, so fix that in the documentation.
The driver now uses the devm_reset_control_array_get() function,
so reset-names is no longer required, but keep it for legacy reasons.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210930110517.14323-1-jbx6244@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Sivaprakash's codeaurora.org email address bounces. Before he comes
back with his new email, fill Jassi's address in there.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The Omnivision OV5640 is supported by Linux thanks to its device tree
binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: linux-media@vger.kernel.org
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211015072830.8580-1-maxime@cerno.tech
Signed-off-by: Rob Herring <robh@kernel.org>
reg was defined as one region covering the entire DP block, but the
memory map is actually split in 4 regions and obviously the size of
these regions differs between platforms.
Switch the reg to require that all four regions are specified instead.
It is expected that the implementation will handle existing DTBs, even
though the schema defines the new layout.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211001174400.981707-2-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
SoCs based on the MSM8953 platform use the 14nm DSI PHY driver
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210928131929.18567-2-sireeshkodali1@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
TQ-Systems' TQMa8Mx module (SoM) uses a pcf85063 as RTC. The default output
is 32768Hz. This is to provide the i.MX8M CKIL clock. Once the RTC driver
is probed, the clock is disabled and all i.MX8M functionality depending on
the 32 KHz clock will halt. In our case the whole system halts and a power
cycle is required.
Referencing the pcf85063 directly results in a deadlock. The kernel
will see, that i.MX8M system clock needs the RTC clock and do probe
deferral. But the i.MX8M I2C module never becomes usable without the
i.MX8M CKIL clock and thus the RTC's clock will not be probed. So
from the kernel's perspective this is a chicken-and-egg problem.
Technically everything is fine by not touching anything, since
the RTC clock correctly enables the clock on reset (i.e. on
battery backup power loss).
A workaround for this issue is describing the square wave pin
as fixed-clock, which is registered early and basically how
this pin is used on the i.MX8M.
This addresses the exact same issue as in commit f765e349c3 ("rtc:
m41t80: add support for fixed clock").
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[Fixed return value 0 -> NULL]
Link: https://lore.kernel.org/r/20211013074954.997445-1-alexander.stein@ew.tq-group.com
This patch adds test-component sound device YAML bindings.
It can be used for Sound Test/Debug.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878ryyn8s4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A few small fixes for v5.15, mostly driver specific but there's one in
the core which fixes a deadlock when adding devices on spi-mux that's
triggered because spi-mux is a SPI device which is itself a SPI
controller and so can instantiate devices when registered. We were
using a global lock to protect against reusing chip selects but they're
a per controller thing so moving the lock per controller resolves that.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmFpaEoACgkQJNaLcl1U
h9Buawf/QpqpYKY+/ZiU3VG1iYYB3zE/KNsBVGPwDHIwLWX5NRxtGupERqoHgqaR
e2Omo459vLdfShXSEuur5Co95q8nbgBxzbFYf/5/fPVmCQipWqAZ6AjJj60fpAP3
qVlXYvYrxUDfGywCkMQjLN3o+dcDxaGVG6+u1vvEnbdMt96lVbOKj2meaFpQ1jbj
faY5GR/+5ZzhvzpxY3/FV6dlwvEdMRon0k6pFLis0YvxyOvQZffRdvAI4KxiFVP9
bAIPRGyn8tbppXlVJBBncRy/aSIxijauk3xGuPmRoy7CZaVZMwlfcPJ18NGixAVG
B9f08ADBY7gAiEiJDCYX0u4ZaAOq+w==
=U/5f
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small fixes.
Mostly driver specific but there's one in the core which fixes a
deadlock when adding devices on spi-mux that's triggered because
spi-mux is a SPI device which is itself a SPI controller and so can
instantiate devices when registered.
We were using a global lock to protect against reusing chip selects
but they're a per controller thing so moving the lock per controller
resolves that"
* tag 'spi-fix-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi-mux: Fix false-positive lockdep splats
spi: Fix deadlock when adding SPI controllers on SPI buses
spi: bcm-qspi: clear MSPI spifie interrupt during probe
spi: spi-nxp-fspi: don't depend on a specific node name erratum workaround
spi: mediatek: skip delays if they are 0
spi: atmel: Fix PDC transfer setup bug
spi: spidev: Add SPI ID table
spi: Use 'flash' node name instead of 'spi-flash' in example
Convert the qca8k bindings to YAML format.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Co-developed-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix warning now that we have qca8k switch Documentation using yaml.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
QCA8328 is the bigger brother of qca8327. Document the new compatible
binding and add some information to understand the various switch
compatible.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document new binding qca,ignore-power-on-sel used to ignore
power on strapping and use sw regs instead.
Document qca,led-open.drain to set led to open drain mode, the
qca,ignore-power-on-sel is mandatory with this enabled or an error will
be reported.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document qca,sgmii-enable-pll binding used in the CPU nodes to
enable SGMII PLL on MAC config.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The switch now support CPU port to be set 6 instead of be hardcoded to
0. Document support for it and describe logic selection.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add names and descriptions of additional PORT0_PAD_CTRL properties.
qca,sgmii-(rx|tx)clk-falling-edge are for setting the respective clock
phase to failling edge.
Co-developed-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The R40 MBUS compatible was introduced recently but it was never
documented.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-26-maxime@cerno.tech
Some Tegra20 boards don't have RAM code stored in NVMEM, which is used for
the memory chip identification and the identity information should be read
out from LPDDR2 chip in this case. Document new sub-node containing generic
LPDDR2 properties that will be used for the memory chip identification if
RAM code isn't available. The identification is done by reading out memory
configuration values from generic LPDDR2 mode registers of SDRAM chip and
comparing them with the values of device-tree 'lpddr2' sub-node.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211006224659.21434-8-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Elpida Memory designed, manufactured and sold dynamic random-access
memory (DRAM) products. It was acquired by Micron Technology in 2013,
still there are many devices with components from Elpida. Document the
vendor prefix.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211006224659.21434-6-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Elpida B8132B2PB-6D-F memory chip is used by ASUS Transformer TF101
tablet, add compatible for it. We need to specify this compatible it
for a device-tree node containing corresponding memory timings in order
to allow software to match the timings with the detected hardware.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211006224659.21434-5-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Add optional revision-id standard LPDDR2 properties which will help to
identify memory chip.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211006224659.21434-4-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Convert LPDDR2 binding to schema. I removed obsolete ti,jedec-lpddr2-*
compatibles since they were never used by device-trees and by the code.
I also changed "Elpida" compatible prefix to lowercase "elpida".
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211006224659.21434-3-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Move DDR bindings to memory-controllers directory to make them more
discoverable.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211006224659.21434-2-digetx@gmail.com
[krzysztof: Correct path in lpddr3.txt and samsung,exynos5422-dmc.yaml]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Add compatible string for Exynos850 chip-id. While at it, use enum
instead of items/const, to reduce further cluttering of "compatible"
list.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211014133508.1210-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The HC generation of the ADC Thermal Monitor is quite similar to the 5th
generation, but differs in valid values for a few properties. Create a
new binding for the HC version of the hardware, rather than sprinkle
conditionals throughout the existing binding.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211005032531.2251928-2-bjorn.andersson@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add the missing board in the binding docuemnt.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In the olden days the Qualcomm shared memory (SMEM) region consisted of
multiple chunks of memory, so SMEM was described as a standalone node
with references to its various memory regions.
But practically all modern Qualcomm platforms has a single reserved memory
region used for SMEM. So rather than having to use two nodes to describe
the one SMEM region, update the binding to allow the reserved-memory
region alone to describe SMEM.
The olden format is preserved as valid, as this is widely used already.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20210930182111.57353-3-bjorn.andersson@linaro.org
The Qualcomm SMEM binding always depended on a reference to a SRAM node
of compatible "qcom,rpm-msg-ram", document this as part of the SRAM
binding.
The SRAM is consumed as a whole and not split up using subnodes, so
properties related to this are not required.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20210930182111.57353-2-bjorn.andersson@linaro.org
On sm8250 videocc requires MMCX power domain to be powered up before
clock controller's registers become available. For now sm8250 was using
external regulator driven by the power domain to describe this
relationship. Switch into specifying power-domain and required opp-state
directly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210829154757.784699-3-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
On sm8250 dispcc requires MMCX power domain to be powered up before
clock controller's registers become available. For now sm8250 was using
external regulator driven by the power domain to describe this
relationship. Switch into specifying power-domain and required opp-state
directly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210829154757.784699-2-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
tools/testing/selftests/net/ioam6.sh
7b1700e009 ("selftests: net: modify IOAM tests for undef bits")
bf77b1400a ("selftests: net: Test for the IOAM encapsulation with IPv6")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- af_unix: rename UNIX-DGRAM to UNIX to maintain backwards compatibility
- procfs: revert "add seq_puts() statement for dev_mcast",
minor format change broke user space
Current release - new code bugs:
- dsa: fix bridge_num not getting cleared after ports leaving
the bridge, resource leak
- dsa: tag_dsa: send packets with TX fwd offload from VLAN-unaware
bridges using VID 0, prevent packet drops if pvid is removed
- dsa: mv88e6xxx: keep the pvid at 0 when VLAN-unaware, prevent
HW getting confused about station to VLAN mapping
Previous releases - regressions:
- virtio-net: fix for skb_over_panic inside big mode
- phy: do not shutdown PHYs in READY state
- dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's,
fix link LED staying lit after ifdown
- mptcp: fix possible infinite wait on recvmsg(MSG_WAITALL)
- mqprio: Correct stats in mqprio_dump_class_stats()
- ice: fix deadlock for Tx timestamp tracking flush
- stmmac: fix feature detection on old hardware
Previous releases - always broken:
- sctp: account stream padding length for reconf chunk
- icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe()
- isdn: cpai: check ctr->cnr to avoid array index out of bound
- isdn: mISDN: fix sleeping function called from invalid context
- nfc: nci: fix potential UAF of rf_conn_info object
- dsa: microchip: prevent ksz_mib_read_work from kicking back
in after it's canceled in .remove and crashing
- dsa: mv88e6xxx: isolate the ATU databases of standalone and
bridged ports
- dsa: sja1105, ocelot: break circular dependency between switch
and tag drivers
- dsa: felix: improve timestamping in presence of packe loss
- mlxsw: thermal: fix out-of-bounds memory accesses
Misc:
- ipv6: ioam: move the check for undefined bits to improve
interoperability
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/K9E
-----END PGP SIGNATURE-----
Merge tag 'net-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Quite calm.
The noisy DSA driver (embedded switches) changes, and adjustment to
IPv6 IOAM behavior add to diffstat's bottom line but are not scary.
Current release - regressions:
- af_unix: rename UNIX-DGRAM to UNIX to maintain backwards
compatibility
- procfs: revert "add seq_puts() statement for dev_mcast", minor
format change broke user space
Current release - new code bugs:
- dsa: fix bridge_num not getting cleared after ports leaving the
bridge, resource leak
- dsa: tag_dsa: send packets with TX fwd offload from VLAN-unaware
bridges using VID 0, prevent packet drops if pvid is removed
- dsa: mv88e6xxx: keep the pvid at 0 when VLAN-unaware, prevent HW
getting confused about station to VLAN mapping
Previous releases - regressions:
- virtio-net: fix for skb_over_panic inside big mode
- phy: do not shutdown PHYs in READY state
- dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's, fix link
LED staying lit after ifdown
- mptcp: fix possible infinite wait on recvmsg(MSG_WAITALL)
- mqprio: Correct stats in mqprio_dump_class_stats()
- ice: fix deadlock for Tx timestamp tracking flush
- stmmac: fix feature detection on old hardware
Previous releases - always broken:
- sctp: account stream padding length for reconf chunk
- icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe()
- isdn: cpai: check ctr->cnr to avoid array index out of bound
- isdn: mISDN: fix sleeping function called from invalid context
- nfc: nci: fix potential UAF of rf_conn_info object
- dsa: microchip: prevent ksz_mib_read_work from kicking back in
after it's canceled in .remove and crashing
- dsa: mv88e6xxx: isolate the ATU databases of standalone and bridged
ports
- dsa: sja1105, ocelot: break circular dependency between switch and
tag drivers
- dsa: felix: improve timestamping in presence of packe loss
- mlxsw: thermal: fix out-of-bounds memory accesses
Misc:
- ipv6: ioam: move the check for undefined bits to improve
interoperability"
* tag 'net-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits)
icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe
MAINTAINERS: Update the devicetree documentation path of imx fec driver
sctp: account stream padding length for reconf chunk
mlxsw: thermal: Fix out-of-bounds memory accesses
ethernet: s2io: fix setting mac address during resume
NFC: digital: fix possible memory leak in digital_in_send_sdd_req()
NFC: digital: fix possible memory leak in digital_tg_listen_mdaa()
nfc: fix error handling of nfc_proto_register()
Revert "net: procfs: add seq_puts() statement for dev_mcast"
net: encx24j600: check error in devm_regmap_init_encx24j600
net: korina: select CRC32
net: arc: select CRC32
net: dsa: felix: break at first CPU port during init and teardown
net: dsa: tag_ocelot_8021q: fix inability to inject STP BPDUs into BLOCKING ports
net: dsa: felix: purge skb from TX timestamping queue if it cannot be sent
net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch lib
net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driver
net: mscc: ocelot: cross-check the sequence id from the timestamp FIFO with the skb PTP header
net: mscc: ocelot: deny TX timestamping of non-PTP packets
net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb
...
Add direct OF support for fetching control parameters from the device
tree. Make it work like the device tree entries for the other IPMI
devices. Also add documentation for this.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
There is no need to include CRU in example of this binding. It wasn't
complete / correct anyway. The proper binding can be find in the
mfd/brcm,cru.yaml .
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211008205938.29925-2-zajec5@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This reverts commit 2ae80900f2.
My rework was unneeded & wrong. It replaced a clear & correct "reg"
property usage with a custom "offset" one.
Back then I didn't understand how to properly handle CRU block binding.
I heard / read about syscon and tried to use it in a totally invalid
way. That change also missed Rob's review (obviously).
Northstar's pin controller is a simple consistent hardware block that
can be cleanly mapped using a 0x24 long reg space.
Since the rework commit there wasn't any follow up modifying in-kernel
DTS files to use the new binding. Broadcom also isn't known to use that
bugged binding. There is close to zero chance this revert may actually
cause problems / regressions.
This commit is a simple revert. Example binding may (should) be updated
/ cleaned up but that can be handled separately.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211008205938.29925-1-zajec5@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The camera clock controller clock provider have a bunch of generic
properties that are needed in a device tree. Add the CAMCC clock IDs for
camera client to request for the clocks.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1633567425-11953-1-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
'reg' is the standard property for defining register banks/addresses. Add
it to use for the register address and deprecate 'offset'. This also
allows for using standard node names with unit-addresses. However, since
it is quite possible to have multiple nodes at the same register
address, allow for the unit-address to optionally have the bit
offset. The unit-address format is '@<reg address>[,<bit offset>]'. This
matches the format recently added for nvmem binding which has the same
issue.
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-leds@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210913192816.1225025-3-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the register-bit-led binding to DT schema format.
As the example just repeats nearly identical nodes, trim it down to a
few nodes and use some documented values for 'linux,default-trigger'.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: linux-leds@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210913192816.1225025-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The LPASS(Low Power Audio Subsystem) clock provider have a bunch of generic
properties that are needed in a device tree. Add the LPASS clock IDs for
LPASS PIL client to request for the clocks.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1633484416-27852-2-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add documentation for the MSM8994 GCC driver. While at it, retire its
compatible from the old, everyone-get-in-here file.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210923162645.23257-1-konrad.dybcio@somainline.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add compatible for the RPM Clock Controller on the QCM2290 SoC.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210917030434.19859-3-shawn.guo@linaro.org
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This drops the use of power-domains for exposing the load_state from the
QMP driver to clients, to avoid issues related to system suspend.
SMP2P becomes wakeup capable, to allow dying remoteprocs to wake up
Linux from suspend to perform recovery.
It adds RPM power-domain support for SM6350 and MSM8953 and base RPM
support for MSM8953 and QCM2290.
It adds support for MSM8996, SDM630 and SDM660 in the SPM driver, which
will enable the introduction of proper voltage scaling of the CPU
subsystem.
Support for releasing secondary CPUs on MSM8226 is introduced.
The Asynchronous Packet Router (APR) driver is extended to support the
new Generic Packet Router (GPR) variant, which is used to communicate
with the firmware in the new AudioReach audio driver.
Lastly it transitions a number of drivers to safer string functions, as
well as switching things to use devm_platform_ioremap_resource().
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmFlxugbHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3F3A0P/ixLiu0XktPOyFZ+3Ag/
5KKan6wlH8JO0AfxbOolk0MkC1/8uk1V+Kuw4b/22jTO4w/9Illi9jSmV0wR3IBh
26sWpyxNK7N+7uAnBDqlZekQYTg5xKqJGn69kxe0oIm8yAogGkxZnlIWt7JGtWS0
NcyLLe9gS/B/q6ppTkxlYhSMB3Qp6bU/lRjBWTcHlxaNxGyNbGw4zp5ncze8ui9R
s0JdFhJ/T1ptuWuIhrEWXEVapQtf0pgPvYSWxRYoBRU4N1F4HcRcLVpUU6eSvFEg
BKxN11dCW4o0njLBpdPtg3u7AL31A95OPFiVwpWEb6Wov1DAdQYfYSoc7r2uqKvL
QgvE/Fq1uPNPsFH2AgJjmku7nb2S0UP2msIhsZjugwxCQXtHgv2uPdYSN/MOudEZ
MdjbbAHKW9+TR4gTVzA7b7OVzB73+tjHo/4hUjy8J5RlRKujbzHHXLRjvpNAILqn
y457eUFqYxR1C3CKy2GrgR/PvNcBdDVq0ikuv4elYZEIaPL/Wxg6V7RJSHzgAgU/
7XArrGvCXdLXy/e07KJ4Su74OBOsXnqLLr+Xsw5+h42XCnDfmI3caQlQjTXxJxN4
EifHOoPCa8JNtXzWKSBSO7Pb5teSYh5XlAQs8nGVbrKMhly/MDLeNzSL+uu8DGNw
B9Cf/mM9bhs3Q69Z37WgOdK0
=FE4j
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=LLU7
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.16
This drops the use of power-domains for exposing the load_state from the
QMP driver to clients, to avoid issues related to system suspend.
SMP2P becomes wakeup capable, to allow dying remoteprocs to wake up
Linux from suspend to perform recovery.
It adds RPM power-domain support for SM6350 and MSM8953 and base RPM
support for MSM8953 and QCM2290.
It adds support for MSM8996, SDM630 and SDM660 in the SPM driver, which
will enable the introduction of proper voltage scaling of the CPU
subsystem.
Support for releasing secondary CPUs on MSM8226 is introduced.
The Asynchronous Packet Router (APR) driver is extended to support the
new Generic Packet Router (GPR) variant, which is used to communicate
with the firmware in the new AudioReach audio driver.
Lastly it transitions a number of drivers to safer string functions, as
well as switching things to use devm_platform_ioremap_resource().
* tag 'qcom-drivers-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (40 commits)
soc: qcom: apr: Add GPR support
soc: dt-bindings: qcom: add gpr bindings
soc: qcom: apr: make code more reuseable
soc: dt-bindings: qcom: apr: deprecate qcom,apr-domain property
soc: dt-bindings: qcom: apr: convert to yaml
dt-bindings: soc: qcom: aoss: Delete unused power-domain definitions
dt-bindings: msm/dp: Remove aoss-qmp header
soc: qcom: aoss: Drop power domain support
dt-bindings: soc: qcom: aoss: Drop the load state power-domain
soc: qcom: smp2p: Add wakeup capability to SMP2P IRQ
dt-bindings: power: rpmpd: Add SM6350 to rpmpd binding
dt-bindings: soc: qcom: aoss: Add SM6350 compatible
soc: qcom: llcc: Disable MMUHWT retention
soc: qcom: smd-rpm: Add QCM2290 compatible
dt-bindings: soc: qcom: smd-rpm: Add QCM2290 compatible
firmware: qcom_scm: Add compatible for MSM8953 SoC
dt-bindings: firmware: qcom-scm: Document msm8953 bindings
soc: qcom: pdr: Prefer strscpy over strcpy
soc: qcom: rpmh-rsc: Make use of the helper function devm_platform_ioremap_resource_byname()
soc: qcom: gsbi: Make use of the helper function devm_platform_ioremap_resource()
...
Link: https://lore.kernel.org/r/20211012173442.1017010-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It adds device tree bindings for QCM2290 Global Clock Controller.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210919023308.24498-2-shawn.guo@linaro.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Make monitored-battery the standard phandle to the battery we monitor
for the AB8500 charger components. We make the old "battery" phandle
deprecated, and the new one required so we detect and fix all users to
use the standard phandle name.
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
make dt_binding_check:
Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml: properties:rockchip,i2s-rx-route: {'required': ['maxItems']} is not allowed for {'$ref': '/schemas/types.yaml#/definitions/uint32-array', 'description': 'Defines the mapping of I2S RX sdis to I2S data bus lines. By default, they are mapped one-to-one. rockchip,i2s-rx-route = <3> would mean sdi3 is receiving from data0.', 'maxItems': 4, 'items': [{'enum': [0, 1, 2, 3]}]}
hint: "maxItems" is not needed with an "items" list
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml: properties:rockchip,i2s-tx-route: {'required': ['maxItems']} is not allowed for {'$ref': '/schemas/types.yaml#/definitions/uint32-array', 'description': 'Defines the mapping of I2S TX sdos to I2S data bus lines. By default, they are mapped one-to-one. rockchip,i2s-tx-route = <3> would mean sdo3 is sending to data0.', 'maxItems': 4, 'items': [{'enum': [0, 1, 2, 3]}]}
hint: "maxItems" is not needed with an "items" list
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
Drop the "-" from the enums to fix this.
Fixes: 510f1c133a ("ASoC: dt-bindings: rockchip: add i2s-tdm bindings")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/606809e10db02f92b1e7f90c491cc72dd8e16f79.1634132907.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Document DT bindings for PCIe controller found on Rockchip SoC.
Link: https://lore.kernel.org/r/20210818093406.157788-1-xxm@rock-chips.com
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Fixes warning:
Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml: properties:xlnx,data-bits: {'const': '$ref'} is not allowed for '$ref'
hint: Standard unit suffix properties don't need a type $ref
from schema $id: http://devicetree.org/meta-schemas/core.yaml#
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20211008234312.61688-1-david@ixit.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This drops the rt9210 support due to a race with a new version being
sent out for some incremental changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
As there are two drivers for DSP on i.MX, one is for sound open
firmware, another is for remote processor framework. In order to
distinguish two kinds of driver, defining different compatible strings.
For remote proc driver, the properties firmware-name and fsl,dsp-ctrl
are needed and the mailbox channel is different with SOF.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1633944015-789-5-git-send-email-shengjiu.wang@nxp.com
[Fixed capital letter at the beginning of the subject line]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Document bindings for NXP SE97B, a DDR memory module temperature sensor
with integrated SPD and EEPROM via Atmel's AT24 interface.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210920182114.339419-6-krzysztof.kozlowski@canonical.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The IBM Common Form Factor Power Supply Versions 1 and 2 bindings are
trivial, so they can be integrated into trivial devices bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210921102832.143352-3-krzysztof.kozlowski@canonical.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This converts the NTC thermistor DT bindings to YAML. Some care had to
be taken since I had to add some illustrations to make the connection
layouts graspable.
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Johannes Pointner <johannes.pointner@gmail.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210922233901.1871274-1-linus.walleij@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The hih6130 bindings are trivial, so it can be integrated into trivial
devices bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210920182114.339419-4-krzysztof.kozlowski@canonical.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The dps650ab bindings are trivial, so it can be integrated into trivial
devices bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210920182114.339419-3-krzysztof.kozlowski@canonical.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
gmt,g751 is covered by LM75 sensor bindings. This fixes warning:
arch/arm/boot/dts/gemini-dlink-dns-313.dt.yaml: temperature-sensor@48:
'#thermal-sensor-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210920182114.339419-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The TI TMP102 temperature sensor does not fit into trivial devices
bindings due to additional properties. Add separate bindings for it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210921102832.143352-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The lm70 thermometer bindings are trivial, so like many other I2C/SPI
temperature sensors can be integrated into trivial devices bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210920182114.339419-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The LM90-like sensors usually need VCC supply, however this can be
hard-wired to the board main supply (like in SiFive HiFive Unmatched
RISC-V board). Original bindings made VCC supply as required but in
practice several other boards skipped it. Make it optional.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210920181913.338772-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Even though we had the iio-hwmon driver for some time and a number of
boards using it already, we never had a binding for it. Let's add it
based on what the driver expects and the boards are providing.
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-hwmon@vger.kernel.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210901091852.479202-24-maxime@cerno.tech
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The ESP8089 Wireless Chip is supported by Linux (through an out-of-tree
driver) thanks to its device tree binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: de Goede <hdegoede@redhat.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210924072756.869731-4-maxime@cerno.tech
Even though both the driver and the device trees all use the
allwinner,sun8i-r40-gmac compatible, we documented the compatible as
allwinner,sun8i-r40-emac in the binding. Let's fix this.
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: netdev@vger.kernel.org
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210924072756.869731-3-maxime@cerno.tech
additionalProperties prevent any property not explicitly defined in the
binding to be used. Yet, some serial properties like max-speed are valid
and validated through the serial/serial.yaml binding.
Even though the ideal solution would be to use unevaluatedProperties
instead, it's not pratical due to the way the bus bindings have been
described. Let's add max-speed to remove the warning.
Cc: Alistair Francis <alistair@alistair23.me>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210924072756.869731-2-maxime@cerno.tech
The original binding was mentioning that valid values for the clocks and
clock-names property were one or two clocks from extclk, txco and lpo,
with extclk being deprecated in favor of txco.
However, the current binding lists a valid array as extclk, txco and
lpo, with either one or two items.
While this looks similar, it actually enforces that all the device trees
use either ["extclk"], or ["extclk", "txco"]. That doesn't make much
sense, since the two clocks are said to be equivalent, with one
superseeding the other.
lpo is also not a valid clock anymore, and would be as the third clock
of the list, while we could have only this clock in the previous binding
(and in DTs).
Let's rework the clock clause to allow to have either:
- extclk, and mark it a deprecated
- txco alone
- lpo alone
- txco, lpo
While ["extclk", "lpo"] wouldn't be valid, it wasn't found in any device
tree so it's not an issue in practice.
Similarly, ["lpo", "txco"] is still considered invalid, but it's
generally considered as a best practice to fix the order of clocks.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210924072756.869731-1-maxime@cerno.tech
SADK(Samsung Automotive Development Kit) is the development kit to
evaluate Exynos Auto v9 SoC. It has 16GB LPDDR4 DRAM and two
256GB Samsung UFS. This patch enables only serial console and ufs0
device.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20211012002314.38965-4-chanho61.park@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The schema defines dependency only of clock-output-names on #clock-cells.
The dependency in opposite direction - requirement of clock-output-names
if #clock-cells is defined - should be explicitly included in the
bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211004151646.73599-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The Microchip PolarFire SoC FPGA DTSI uses Cadence SD/SDIO/eMMC Host
Controller without any additional vendor compatible:
arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dt.yaml: mmc@20008000: compatible:0: 'cdns,sd4hc' is not one of ['socionext,uniphier-sd4hc']
arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dt.yaml: mmc@20008000: compatible: ['cdns,sd4hc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210927125044.20046-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Nowadays the standard non-removable property should be used, but we
still need to parse the ti,non-removable too. Let's document it as a
deprecated property.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210924073441.7835-1-tony@atomide.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
MMC Cards can have an optional Device Tree binding to add
non-discoverable properties.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Some of these properties were already described in the MMC controller
binding, even though they are not generic and do not apply to any
device, so we took the occasion to fix this.
Cc: linux-mmc@vger.kernel.org
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210901091852.479202-31-maxime@cerno.tech
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The clocks in the example use 'SCLK_DDRCLK', which does not exist in
the rk3399-cru.h, correct it to 'SCLK_DDRC'.
Ref: commit 7fbdfcd687 ("clk: rockchip: add SCLK_DDRC id for rk3399 ddrc")
Fixes: c1ceb8f7c1 ("Documentation: bindings: add dt documentation for rk3399 dmc")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20211001150024.18672-1-amadeus@jmu.edu.cn
Signed-off-by: Rob Herring <robh@kernel.org>
- Addition of a new variant in the sama5d2 family: the sama5d29 with
significant updates being CAN and Ethernet controllers;
- Add support for Exegin Q5xR5 and CalAmp LMU5000 boards which were
maintained up to this moment, separately, in OpenWrt tree;
- Two more boards gained I2C bus recovery support;
- Tse850 updated with one Ethernet fix;
- Sama7g5ek gained ADC nodes and sama5d27_wlsom1 WiFi support.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYWQuQwAKCRAfOrpwrNPN
DP3CAQCOSNWmCOwvlWJdu7/FjsxPsPXmUyUHW0oAFF80sEkaBQEAiN6QlIDvTB9U
Cxn/wYe2zbQ+vJbqkuODTqK104OUdA4=
=Ph50
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=FHko
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT #1 for 5.16:
- Addition of a new variant in the sama5d2 family: the sama5d29 with
significant updates being CAN and Ethernet controllers;
- Add support for Exegin Q5xR5 and CalAmp LMU5000 boards which were
maintained up to this moment, separately, in OpenWrt tree;
- Two more boards gained I2C bus recovery support;
- Tse850 updated with one Ethernet fix;
- Sama7g5ek gained ADC nodes and sama5d27_wlsom1 WiFi support.
* tag 'at91-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: dts: sama5d29: Add dtsi file for sama5d29
ARM: dts: at91-sama5d2_icp.dts: Added I2C bus recovery support
ARM: dts: at91: tse850: the emac<->phy interface is rmii
ARM: dts: at91: add Exegin Q5xR5 board
dt-bindings: ARM: at91: document exegin q5xr5 board
dt-bindings: add vendor prefix for exegin
ARM: dts: at91: add CalAmp LMU5000 board
dt-bindings: ARM: at91: document CalAmp LMU5000 board
dt-bindings: add vendor prefix for calamp
ARM: dts: at91: at91sam9260: add pinctrl label
ARM: dts: at91-sama5d27_som1_ek: Added I2C bus recovery support
ARM: dts: at91: sama7g5ek: enable ADC on the board
ARM: dts: at91: sama7g5: add node for the ADC
ARM: dts: at91: sama5d27_wlsom1: add wifi device
Link: https://lore.kernel.org/r/20211011123438.16562-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains the DT bindings for the NVDEC hardware video decoder found
on Tegra210 and later chips as well as a node name fix for the examples
in the Tegra194 PCIe controller (endpoint mode) DT bindings.
-----BEGIN PGP SIGNATURE-----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=TONa
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=cvhE
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.16-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v5.16-rc1
This contains the DT bindings for the NVDEC hardware video decoder found
on Tegra210 and later chips as well as a node name fix for the examples
in the Tegra194 PCIe controller (endpoint mode) DT bindings.
* tag 'tegra-for-5.16-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: PCI: tegra194: Fix PCIe endpoint node names
dt-bindings: Add YAML bindings for NVDEC
Link: https://lore.kernel.org/r/20211008201132.1678814-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Renesas RPC: fix unaligned bus access and QSPI data transfers in
manual modes.
2. Renesas RPC: select RESET_CONTROLLER as it is necessary for
operation.
3. FSL IFC: fix error paths.
4. Broadcom: allow building as module.
-----BEGIN PGP SIGNATURE-----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=ZsTv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFkDP4ACgkQmmx57+YA
GNnOzRAAxRm9E9hFwaqKoyEopnuxJRFxxjXFS8hM8GieiwD5upJBBtB7HjGqcfBC
i5RZV9RRKU2v04tdddkWhS4Pcw52eEmE/T77uMhr8UwaOzzkuVgKdOz432XuVCwf
2O6oGS2igTTWMKakb+4Zza9q3PXPuUdFgXyOBdeB1PF96RnV9qjSRviwpp+P75fj
9X0ikocRVo80hCDMsiTtYwzd10CbslVIOv9wWHSa7kKQzuHJbALYL4mjnlvF4bCo
9iDVu+UJCsAhd16Xtks2VtewYmox+n/+q/ThKDU0IB2I9kdR5tvpkQqPhdn8W0Fj
LiJDfDexB5rS3o9E/ws6CJGFhMxI9QFyMLXGq8HAXHjRGTIlCKA53DqpH2r10Hlj
5mzuNRfxyo2mAu2sXzDF2ScVXImsSGN65evdsFFOlohVbivhq5AZzpYnQBT/tR1K
E4srv07jl7FxI03YavNevq3fqzE+SSZ1cX8PAcKY7qeueci4yPmd9/7SiJLqyHDd
Q5B2q60bbCF3E7F0UQpKMjq1ZB0jO16PKYZ1BzOtXLQloC6HRR+HuLMpsyLEb09d
4aAwWl3Xa183t9lTLCuzZuC3b8qZgwcKrVrDO+Rigb8adtlOVAQFoqWZthzhL3Ys
nIRY2wc83rtJ/uSghFEe1sLZvZ+2K9nEWD0wInejtq+GqhqWn9s=
=OOXj
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.16
1. Renesas RPC: fix unaligned bus access and QSPI data transfers in
manual modes.
2. Renesas RPC: select RESET_CONTROLLER as it is necessary for
operation.
3. FSL IFC: fix error paths.
4. Broadcom: allow building as module.
* tag 'memory-controller-drv-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: fsl_ifc: fix leak of irq and nand_irq in fsl_ifc_ctrl_probe
memory: renesas-rpc-if: RENESAS_RPCIF should select RESET_CONTROLLER
memory: brcmstb_dpfe: Allow building Broadcom STB DPFE as module
memory: samsung: describe drivers in KConfig
memory: renesas-rpc-if: Avoid unaligned bus access for HyperFlash
memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode
dt-bindings: rpc: renesas-rpc-if: Add support for the R8A779A0 RPC-IF
Link: https://lore.kernel.org/r/20211010175836.13302-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add MT8195 support to the Mediatek SMI memory controller driver. This
brings also several cleanups and minor enhancements before adding actual
new device support.
-----BEGIN PGP SIGNATURE-----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=mga+
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=HHse
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-mtk-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.14 - Mediatek
Add MT8195 support to the Mediatek SMI memory controller driver. This
brings also several cleanups and minor enhancements before adding actual
new device support.
* tag 'memory-controller-drv-mtk-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
MAINTAINERS: Add entry for MediaTek SMI
memory: mtk-smi: mt8195: Add initial setting for smi-larb
memory: mtk-smi: mt8195: Add initial setting for smi-common
memory: mtk-smi: mt8195: Add smi support
memory: mtk-smi: Use devm_platform_ioremap_resource
memory: mtk-smi: Add clocks for smi-sub-common
memory: mtk-smi: Add device link for smi-sub-common
memory: mtk-smi: Add error handle for smi_probe
memory: mtk-smi: Adjust some code position
memory: mtk-smi: Rename smi_gen to smi_type
memory: mtk-smi: Use clk_bulk clock ops
dt-bindings: memory: mediatek: Add mt8195 smi sub common
dt-bindings: memory: mediatek: Add mt8195 smi binding
Link: https://lore.kernel.org/r/20211010175836.13302-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Apple I2C controller is based on the PASemi I2C controller.
It is present on Apple SoCs such as the M1.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Olof Johansson <olof@lixom.net>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Convert omap-gpmc.txt to ti,gpmc.yaml.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Convert gpmc-onenand.txt to ti,gpmc-onenand.yaml.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Convert gpmc-nand.txt to ti,gpmc-nand.yaml.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This binding is meant for the child nodes of the TI GPMC node. The node
represents any device connected to the GPMC bus. It may be a Flash chip,
RAM chip or Ethernet controller, etc. These properties are meant for
configuring the GPMC settings/timings and will accompany the bindings
supported by the respective device.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
There is no GPMC Ethernet compatible or device driver. GPMC is
just a bus interface over which devices like Ethernet controller
can be to.
For SMSC 911x Ethernet chip bindings, please refer to
Documentation/devicetree/bindings/net/smsc,lan9115.yaml
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
There is no GPMC NOR compatible or device driver. GPMC is just
a bus interface over which standard (CFI/JEDC) NOR Flash chips
can be attached.
For NOR chip bindings, please refer to
Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
UAPI Changes:
- Allow empty drm leases for creating separate GEM namespaces.
Cross-subsystem Changes:
- Slightly rework dma_buf_poll.
- Add dma_resv_for_each_fence_unlocked to iterate, and use it inside
the lockless dma-resv functions.
Core Changes:
- Allow devm_drm_of_get_bridge to build without CONFIG_OF for compile testing.
- Add more DP2 headers.
- fix CONFIG_FB dependency in fb_helper.
- Add DRM_FORMAT_R8 to drm_format_info, and helpers for RGB332 and RGB888.
- Fix crash on a 0 or invalid EDID.
Driver Changes:
- Apply and revert DRM_MODESET_LOCK_ALL_BEGIN.
- Add mode_valid to ti-sn65dsi86 bridge.
- Support multiple syncobjs in v3d.
- Add R8, RGB332 and RGB888 pixel formats to GUD.
- Use devm_add_action_or_reset in dw-hdmi-cec.
-----BEGIN PGP SIGNATURE-----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=qxpr
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-10-06' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.16:
UAPI Changes:
- Allow empty drm leases for creating separate GEM namespaces.
Cross-subsystem Changes:
- Slightly rework dma_buf_poll.
- Add dma_resv_for_each_fence_unlocked to iterate, and use it inside
the lockless dma-resv functions.
Core Changes:
- Allow devm_drm_of_get_bridge to build without CONFIG_OF for compile testing.
- Add more DP2 headers.
- fix CONFIG_FB dependency in fb_helper.
- Add DRM_FORMAT_R8 to drm_format_info, and helpers for RGB332 and RGB888.
- Fix crash on a 0 or invalid EDID.
Driver Changes:
- Apply and revert DRM_MODESET_LOCK_ALL_BEGIN.
- Add mode_valid to ti-sn65dsi86 bridge.
- Support multiple syncobjs in v3d.
- Add R8, RGB332 and RGB888 pixel formats to GUD.
- Use devm_add_action_or_reset in dw-hdmi-cec.
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Wed 06 Oct 2021 20:48:12 AEST
# gpg: using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3
# gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired]
# gpg: aka "Maarten Lankhorst <maarten@debian.org>" [expired]
# gpg: aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired]
# gpg: Note: This key has expired!
# Primary key fingerprint: B97B D6A8 0CAC 4981 091A E547 FE55 8C72 A670 13C3
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2602f4e9-a8ac-83f8-6c2a-39fd9ca2e1ba@linux.intel.com
Add devicetree bindings for the Sharp LS060T1SX01 6.0" FullHD panel
using NT35695 driver. This panel can be found i.e. in the Dragonboard
Display Adapter bundle.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211009203806.56821-2-dmitry.baryshkov@linaro.org
Decoder input LVDS format is a property of the decoder chip or even
its strapping. Add DT property data-mapping the same way lvds-panel
does, to define the LVDS data mapping.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211010144919.38392-1-marex@denx.de
additionalProperties: false
ignores the pattern matching for serdev objects in serial.yaml, causing
error messages when serdev subnodes like bluetooth or gnss devices are
defined. Using unevaluatedProperties instead is the correct way
if arbitrary children nodes can appear.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20211001211731.2923066-1-andreas@kemnade.info
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both hardware and driver can communicate DDC over i2c bus.
Fixes warnings as:
arch/arm/boot/dts/tegra20-paz00.dt.yaml: panel: 'ddc-i2c-bus' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: /home/runner/work/linux/linux/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210927214503.36012-1-david@ixit.cz
This tablet display is unique and hence must be added to documentation.
Unfortunately, it's real make and number is not known due to obscure and
missing documentation and lack of writing on the display assembly
itself.
So the natural alternative that came to mind is to name the panel after
the device that contained it (an Android tablet). Hopefully that isn't
an issue.
I can confirm that the parameters that I've obtained are correct since
they came from a dump of the original Android OS.
Signed-off-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002202905.509437-2-pavlica.nikola@gmail.com
The Vitesse/Microsemi/Microchip family of switches supported by the
Felix DSA driver is capable of selecting between the native tagging
protocol and ocelot-8021q. This is necessary to enable flow control on
the CPU port.
Certain systems where these switches are integrated use the switch as a
port multiplexer, so the termination throughput is paramount. Changing
the tagging protocol at runtime is possible for these systems, but since
it is known beforehand that one tagging protocol will provide strictly
better performance than the other, just allow them to specify the
preference in the device tree.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a trivial typo when spelling "protocol", fix it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hi All,
Changes since v2
================
1. Add Stephen's and Rob's tags.
2. Correct inb-supply description in patch 10/10.
Changes since v2
================
1. Add Rob's tags.
2. Remove "regulator-name" from properties (all regulator dtschema).
3. Move "unevaluatedProperties" higher to make code easier to read (all regulator dtschema).
4. Add ref-type to op-mode property (patch 6: s5m8767 regulators).
Changes since v1
================
1. Drop DTS patches - applied.
2. Fully remove bindings/regulator/samsung,s5m8767.txt .
3. Minor subject reformatting and few typos in text.
Intro
=====
This patchset converts all devicetree bindings of Samsung S2M and S5M
PMIC devices from txt to dtschema.
It includes also two fixes because later conversion depends on it
(contextually).
Merging/dependencies
====================
1. Regulator related binding changes depend on first two commits (the
fixes), because of context.
2. The mfd bindings depend on clock and regulator bindings.
The fixes and bindings changes (patches 1-10) should go via the same
tree. For example regulator or mfd tree.
Another alternative is that regulator patches (1-2, 4-6) go via Mark who
later gives MFD a stable branch/tag to pull. Then the clock and MFD
bindings would go on top via MFD tree. Or any other setup you would like
to have.
Overview of devices
===================
Essentially all Samsung S2M and S5M PMICs are very similar devices. They
provide the same functionality: regulators, RTC, 2 or 3 clocks and main
power management (e.g. power cut to SoC).
The differences are mostly in registers layout and number of regulators.
The drivers are built around one common part, mfd/sec-core.c, and share
some drivers between devices:
1. MFD sec-core for all devices,
1. one clock driver for most of devices,
2. one RTC driver for all devices,
3. three regulator drivers.
The regulator drivers were implementing slightly different features,
therefore one regulator binding for all devices does not make much
sense. However the clock device binding can be shared.
The final dtschema bindings try to implement this - share only the clock
bindings.
Best regards,
Krzysztof
Krzysztof Kozlowski (10):
regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS
is disabled
regulator: dt-bindings: samsung,s5m8767: correct
s5m8767,pmic-buck-default-dvs-idx property
dt-bindings: clock: samsung,s2mps11: convert to dtschema
regulator: dt-bindings: samsung,s2m: convert to dtschema
regulator: dt-bindings: samsung,s2mpa01: convert to dtschema
regulator: dt-bindings: samsung,s5m8767: convert to dtschema
dt-bindings: mfd: samsung,s2mps11: convert to dtschema
dt-bindings: mfd: samsung,s2mpa01: convert to dtschema
dt-bindings: mfd: samsung,s5m8767: convert to dtschema
dt-bindings: mfd: samsung,s5m8767: document buck and LDO supplies
.../bindings/clock/samsung,s2mps11.txt | 49 ---
.../bindings/clock/samsung,s2mps11.yaml | 45 +++
.../bindings/mfd/samsung,s2mpa01.yaml | 91 ++++++
.../bindings/mfd/samsung,s2mps11.yaml | 267 +++++++++++++++
.../bindings/mfd/samsung,s5m8767.yaml | 307 ++++++++++++++++++
.../bindings/mfd/samsung,sec-core.txt | 86 -----
.../bindings/regulator/samsung,s2mpa01.txt | 79 -----
.../bindings/regulator/samsung,s2mpa01.yaml | 62 ++++
.../bindings/regulator/samsung,s2mps11.txt | 102 ------
.../bindings/regulator/samsung,s2mps11.yaml | 44 +++
.../bindings/regulator/samsung,s2mps13.yaml | 44 +++
.../bindings/regulator/samsung,s2mps14.yaml | 44 +++
.../bindings/regulator/samsung,s2mps15.yaml | 44 +++
.../bindings/regulator/samsung,s2mpu02.yaml | 44 +++
.../bindings/regulator/samsung,s5m8767.txt | 145 ---------
.../bindings/regulator/samsung,s5m8767.yaml | 74 +++++
MAINTAINERS | 9 +-
drivers/regulator/s5m8767.c | 21 +-
18 files changed, 1080 insertions(+), 477 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
create mode 100644 Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
delete mode 100644 Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
delete mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml
delete mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml
delete mode 100644 Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
--
2.30.2
core:
- Kconfig fix for fb_simple vs simpledrm.
i915:
- Fix RKL HDMI audio
- Fix runtime pm imbalance on i915_gem_shrink() error path
- Fix Type-C port access before hw/sw state sync
- Fix VBT backlight struct version/size check
- Fix VT-d async flip on SKL/BXT with plane stretch workaround
amdgpu:
- DCN 3.1 DP alt mode fixes
- S0ix gfxoff fix
- Fix DRM_AMD_DC_SI dependencies
- PCIe DPC handling fix
- DCN 3.1 scaling fix
- Documentation fix
amdkfd:
- Fix potential memory leak
- IOMMUv2 init fixes
vc4:
- compiler fix
- (there were some hdmi fixes but things got reverted, sort it out later)
nouveau:
- Cursor fix
- Fix ttm buffer moves for ampere gpu's by adding minimal acceleration support.
- memory leak fixes
rockchip:
- crtc/clk fixup
panel:
- ili9341 Fix DT bindings indent
- y030xx067a - yellow tint init seq fix
gbefb:
- Fix gbefb when built with COMPILE_TEST.
-----BEGIN PGP SIGNATURE-----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=Wbzr
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2021-10-08' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"I've returned from my tropical island retreat, even managed to bring
one of my kids on a dive with some turtles. Thanks to Daniel for doing
last week's work.
Otherwise this is the weekly fixes pull, it's a bit bigger because the
vc4 reverts in your tree caused some problems with fixes in the
drm-misc tree so it got left out last week, so this week has the misc
fixes rebased without the vc4 pieces.
Otherwise it's i915, amdgpu with the usual fixes and a scattering over
other drivers.
I expect things should calm down a bit more next week.
core:
- Kconfig fix for fb_simple vs simpledrm.
i915:
- Fix RKL HDMI audio
- Fix runtime pm imbalance on i915_gem_shrink() error path
- Fix Type-C port access before hw/sw state sync
- Fix VBT backlight struct version/size check
- Fix VT-d async flip on SKL/BXT with plane stretch workaround
amdgpu:
- DCN 3.1 DP alt mode fixes
- S0ix gfxoff fix
- Fix DRM_AMD_DC_SI dependencies
- PCIe DPC handling fix
- DCN 3.1 scaling fix
- Documentation fix
amdkfd:
- Fix potential memory leak
- IOMMUv2 init fixes
vc4 (there were some hdmi fixes but things got reverted, sort it out
later):
- compiler fix
nouveau:
- Cursor fix
- Fix ttm buffer moves for ampere gpu's by adding minimal
acceleration support.
- memory leak fixes
rockchip:
- crtc/clk fixup
panel:
- ili9341 Fix DT bindings indent
- y030xx067a - yellow tint init seq fix
gbefb:
- Fix gbefb when built with COMPILE_TEST"
* tag 'drm-fixes-2021-10-08' of git://anongit.freedesktop.org/drm/drm: (33 commits)
drm/amd/display: Fix detection of 4 lane for DPALT
drm/amd/display: Limit display scaling to up to 4k for DCN 3.1
drm/amd/display: Skip override for preferred link settings during link training
drm/nouveau/debugfs: fix file release memory leak
drm/nouveau/kms/nv50-: fix file release memory leak
drm/nouveau: avoid a use-after-free when BO init fails
DRM: delete DRM IRQ legacy midlayer docs
video: fbdev: gbefb: Only instantiate device when built for IP32
fbdev: simplefb: fix Kconfig dependencies
drm/panel: abt-y030xx067a: yellow tint fix
dt-bindings: panel: ili9341: correct indentation
drm/nouveau/fifo/ga102: initialise chid on return from channel creation
drm/rockchip: Update crtc fixup to account for fractional clk change
drm/nouveau/ga102-: support ttm buffer moves via copy engine
drm/nouveau/kms/tu102-: delay enabling cursor until after assign_windows
drm/sun4i: dw-hdmi: Fix HDMI PHY clock setup
drm/vc4: hdmi: Remove unused struct
drm/kmb: Enable alpha blended second plane
drm/amdgpu: handle the case of pci_channel_io_frozen only in amdgpu_pci_resume
drm/amdgpu: init iommu after amdkfd device init
...
Convert the regulators of Samsung S5M8767 PMIC to DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008113931.134847-3-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the regulators of Samsung S2MPA01 PMIC to DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008113931.134847-2-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the regulators of Samsung
S2MPS11/S2MPS13/S2MPS14/S2MPS15/S2MPU02 family of PMICs to DT schema
format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008113931.134847-1-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the clock provider of Samsung S2MPS11 family of PMICs to DT
schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Message-Id: <20211008113723.134648-4-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver was always parsing "s5m8767,pmic-buck-default-dvs-idx", not
"s5m8767,pmic-buck234-default-dvs-idx".
Cc: <stable@vger.kernel.org>
Fixes: 26aec009f6 ("regulator: add device tree support for s5m8767")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008113723.134648-3-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver and its bindings, before commit 04f9f068a6 ("regulator:
s5m8767: Modify parsing method of the voltage table of buck2/3/4") were
requiring to provide at least one safe/default voltage for DVS registers
if DVS GPIO is not being enabled.
IOW, if s5m8767,pmic-buck2-uses-gpio-dvs is missing, the
s5m8767,pmic-buck2-dvs-voltage should still be present and contain one
voltage.
This requirement was coming from driver behavior matching this condition
(none of DVS GPIO is enabled): it was always initializing the DVS
selector pins to 0 and keeping the DVS enable setting at reset value
(enabled). Therefore if none of DVS GPIO is enabled in devicetree,
driver was configuring the first DVS voltage for buck[234].
Mentioned commit 04f9f068a6 ("regulator: s5m8767: Modify parsing
method of the voltage table of buck2/3/4") broke it because DVS voltage
won't be parsed from devicetree if DVS GPIO is not enabled. After the
change, driver will configure bucks to use the register reset value as
voltage which might have unpleasant effects.
Fix this by relaxing the bindings constrain: if DVS GPIO is not enabled
in devicetree (therefore DVS voltage is also not parsed), explicitly
disable it.
Cc: <stable@vger.kernel.org>
Fixes: 04f9f068a6 ("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008113723.134648-2-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the Maxim MAX8973 regulator to DT schema format. Extend the
examples with more advanced one for MAX77621 copied from kernel's
nvidia/tegra210-smaug.dts, licensed under GPL-2.0.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008114755.148279-1-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
dwmac 3.40a is an old ip version that can be found on SPEAr3xx soc.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dp-aux-bus.yaml says we can list an eDP panel as a child of
an eDP controller node to represent the fact that the panel
is connected to the controller's DP AUX bus.
Let's add it to the ps8640 bindings.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929173343.v2.2.I6050ba184b24d887e92692a72ee3054d643d6091@changeid
Add devicetree binding for Qualcomm PCIe Endpoint controller used in
platforms like SDX55. The Endpoint controller is based on the DesignWare
core with Qualcomm-specific wrappers.
Link: https://lore.kernel.org/r/20210920065946.15090-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
The mmsys system controller exposes a set of memory client resets and
needs to specify the #reset-cells property in order to advertise the
number of cells needed to describe each of the resets.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210930103105.v4.2.I3f7f1c9a8e46be07d1757ddf4e0097535f3a7d41@changeid
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The document was merged as commit 1afc60e00d ("dt-bindings:
mediatek: mt8192: add audio afe document").
However, [1] revealed that the commit 1afc60e00d breaks
dt_binding_check due to dt-bindings/clock/mt8192-clk.h doesn't
exist.
As a temporary fix, commit 7d94ca3c8a ("ASoC: mt8192: revert
add audio afe document") reverted commit 1afc60e00d.
dt-bindings/clock/mt8192-clk.h is in mainline per commit
f35f1a23e0 ("clk: mediatek: Add dt-bindings of MT8192 clocks").
Re-adds the document back.
[1]: https://mailman.alsa-project.org/pipermail/alsa-devel/2020-November/176873.html
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Message-Id: <20211008025523.1852319-1-tzungbi@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the bindings used for the SK Hynix Hi-846 CMOS camera driver.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
SK Hynix built the already supported hi556 sensor (and probably much
more). For more information, see https://www.skhynix.com/
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a schema description for the venus video encoder/decoder on
the sc7280.
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hello,
while trying to understand how the spi framework makes use of the core
device driver stuff (to fix a deadlock) I found these simplifications
and improvements.
They are build-tested with allmodconfig on arm64, m68k, powerpc, riscv,
s390, sparc64 and x86_64.
Best regards
Uwe
Uwe Kleine-König (4):
spi: Move comment about chipselect check to the right place
spi: Remove unused function spi_busnum_to_master()
spi: Reorder functions to simplify the next commit
spi: Make several public functions private to spi.c
Documentation/spi/spi-summary.rst | 8 -
drivers/spi/spi.c | 237 ++++++++++++------------------
include/linux/spi/spi.h | 55 -------
3 files changed, 95 insertions(+), 205 deletions(-)
base-commit: 9e1ff307c7
--
2.30.2
The max98927 codec on some devices (i.e. Xiaomi Mi A2 Lite phone) requires
hardware-resetting the codec by driving a reset-gpio. This series adds
support for it through an optional reset-gpios property.
v4:
* Correctly assert/deassert the GPIO states
* Wait for the i2c port to be ready after reset
* Reset device when removed
v3:
* Fix indentation on the dev_err_probe line
v2:
* Use dev_err_probe instead of dev_err
Alejandro Tafalla (2):
ASoC: max98927: Handle reset gpio when probing i2c
dt-bindings: sound: max98927: Add reset-gpios optional property
.../devicetree/bindings/sound/max9892x.txt | 3 +++
sound/soc/codecs/max98927.c | 25 +++++++++++++++++++
sound/soc/codecs/max98927.h | 1 +
3 files changed, 29 insertions(+)
--
2.33.0
As defined by Documentation/devicetree/bindings/pci/pci-ep.yaml,
PCIe endpoints match this pattern:
properties:
$nodename:
pattern: "^pcie-ep@"
Change the existing ones in the DT bindings examples to avoid warnings
during DT bindings validation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The AST2600 has the same register set as the previous generation SoCs.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Message-Id: <20210903015314.177987-1-joel@jms.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
netfilter, and wireless.
Current release - regressions:
- xfrm: fix XFRM_MSG_MAPPING ABI breakage caused by inserting
a new value in the middle of an enum
- unix: fix an issue in unix_shutdown causing the other end
read/write failures
- phy: mdio: fix memory leak
Current release - new code bugs:
- mlx5e: improve MQPRIO resiliency against bad configs
Previous releases - regressions:
- bpf: fix integer overflow leading to OOB access in map element
pre-allocation
- stmmac: dwmac-rk: fix ethernet on rk3399 based devices
- netfilter: conntrack: fix boot failure with nf_conntrack.enable_hooks=1
- brcmfmac: revert using ISO3166 country code and 0 rev as fallback
- i40e: fix freeing of uninitialized misc IRQ vector
- iavf: fix double unlock of crit_lock
Previous releases - always broken:
- bpf, arm: fix register clobbering in div/mod implementation
- netfilter: nf_tables: correct issues in netlink rule change
event notifications
- dsa: tag_dsa: fix mask for trunked packets
- usb: r8152: don't resubmit rx immediately to avoid soft lockup
on device unplug
- i40e: fix endless loop under rtnl if FW fails to correctly
respond to capability query
- mlx5e: fix rx checksum offload coexistence with ipsec offload
- mlx5: force round second at 1PPS out start time and allow it
only in supported clock modes
- phy: pcs: xpcs: fix incorrect CL37 AN sequence, EEE disable
sequence
Misc:
- xfrm: slightly rejig the new policy uAPI to make it less cryptic
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xzZg
-----END PGP SIGNATURE-----
Merge tag 'net-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from xfrm, bpf, netfilter, and wireless.
Current release - regressions:
- xfrm: fix XFRM_MSG_MAPPING ABI breakage caused by inserting a new
value in the middle of an enum
- unix: fix an issue in unix_shutdown causing the other end
read/write failures
- phy: mdio: fix memory leak
Current release - new code bugs:
- mlx5e: improve MQPRIO resiliency against bad configs
Previous releases - regressions:
- bpf: fix integer overflow leading to OOB access in map element
pre-allocation
- stmmac: dwmac-rk: fix ethernet on rk3399 based devices
- netfilter: conntrack: fix boot failure with
nf_conntrack.enable_hooks=1
- brcmfmac: revert using ISO3166 country code and 0 rev as fallback
- i40e: fix freeing of uninitialized misc IRQ vector
- iavf: fix double unlock of crit_lock
Previous releases - always broken:
- bpf, arm: fix register clobbering in div/mod implementation
- netfilter: nf_tables: correct issues in netlink rule change event
notifications
- dsa: tag_dsa: fix mask for trunked packets
- usb: r8152: don't resubmit rx immediately to avoid soft lockup on
device unplug
- i40e: fix endless loop under rtnl if FW fails to correctly respond
to capability query
- mlx5e: fix rx checksum offload coexistence with ipsec offload
- mlx5: force round second at 1PPS out start time and allow it only
in supported clock modes
- phy: pcs: xpcs: fix incorrect CL37 AN sequence, EEE disable
sequence
Misc:
- xfrm: slightly rejig the new policy uAPI to make it less cryptic"
* tag 'net-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
net: prefer socket bound to interface when not in VRF
iavf: fix double unlock of crit_lock
i40e: Fix freeing of uninitialized misc IRQ vector
i40e: fix endless loop under rtnl
dt-bindings: net: dsa: marvell: fix compatible in example
ionic: move filter sync_needed bit set
gve: report 64bit tx_bytes counter from gve_handle_report_stats()
gve: fix gve_get_stats()
rtnetlink: fix if_nlmsg_stats_size() under estimation
gve: Properly handle errors in gve_assign_qpl
gve: Avoid freeing NULL pointer
gve: Correct available tx qpl check
unix: Fix an issue in unix_shutdown causing the other end read/write failures
net: stmmac: trigger PCS EEE to turn off on link down
net: pcs: xpcs: fix incorrect steps on disable EEE
netlink: annotate data races around nlk->bound
net: pcs: xpcs: fix incorrect CL37 AN sequence
net: sfp: Fix typo in state machine debug string
net/sched: sch_taprio: properly cancel timer from taprio_destroy()
net: bridge: fix under estimation in br_get_linkxstats_size()
...
Convert the Maxim MAX8997 PMIC bindings to DT schema format. Extend the
examples with additional one copied from kernel's exynos4210-origen.dts.
Also the binding descriptions are copied from old file, so license
entire work under GPL-2.0.
This also adds previously undocumented 32 kHz clock output modelled as
regulators.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211001130249.80405-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A correct value for output-range-microvolts is -5 to 5 Volts
not -5 to 5 milivolts
Fixes: e904cc8992 ("dt-bindings: iio: dac: AD5766 yaml documentation")
Signed-off-by: Mihail Chindris <mihail.chindris@analog.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211007080035.2531-6-mihail.chindris@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
- Add another allowed address for TI sn65dsi86
- Drop more redundant minItems/maxItems
- Fix more graph 'unevaluatedProperties' warnings in media bindings
-----BEGIN PGP SIGNATURE-----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=WXDr
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Add another allowed address for TI sn65dsi86
- Drop more redundant minItems/maxItems
- Fix more graph 'unevaluatedProperties' warnings in media bindings
* tag 'devicetree-fixes-for-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: drm/bridge: ti-sn65dsi86: Fix reg value
dt-bindings: Drop more redundant 'maxItems/minItems'
dt-bindings: media: Fix more graph 'unevaluatedProperties' related warnings
Add YAML device tree bindings for NVDEC, now in a more appropriate
place compared to the old textual Host1x bindings.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
While the MV88E6390 switch chip exists, one is supposed to use a
compatible of "marvell,mv88e6190" for it. Fix this in the given example.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Fixes: a3c53be55c ("net: dsa: mv88e6xxx: Support multiple MDIO busses")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Raspberry Pi boards with BCM283x needs control of the power domains
to get display components running. DT schema warns us that it's used, but not
documented as a optional property:
hdmi@7e902000: 'power-domains' does not match any of the regexes: ...
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1628334401-6577-4-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Add compatibles for j721e and j7200 evms to allow for newer platforms
to distinguish themselves.
While doing this, maintain support for older style of description where
the board compatibility was not required.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210925201430.11678-2-nm@ti.com
This adds device tree bindings for Samsung SDI batteries.
Everything can be determined from the product number so the entire
battery is just a specific compatible string.
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
- Document support for the new R-Car H3e, M3e, M3Ne(-2G), D3e, E3e, and
H3Ne SoCs and boards.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYVbVZQAKCRCKwlD9ZEnx
cA1SAP9EGqPZCa/ICXHn98BAbAxVcOl5tewwbKY3RBRfBcngUgEA1D/LS1F0B317
y2hQhdaqt9n5uA4OUcsiQNuqDemTPAs=
=+chU
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=PQot
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-bindings-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas DT binding updates for v5.16
- Document support for the new R-Car H3e, M3e, M3Ne(-2G), D3e, E3e, and
H3Ne SoCs and boards.
* tag 'renesas-dt-bindings-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: arm: renesas: Document more R-Car Gen3e Socs and boards
Link: https://lore.kernel.org/r/cover.1633081158.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This replaces the existing .txt binding file. Furthermore, this
also helps with validating DTS files.
Introduced binding changes:
1. added inherited mac-address nvmem property
2. added inherited ieee80211-freq-limit property
3. added new calibration nvmem property
4. added second example (taken from the Netgear WNDR3700v2)
Reason: Setting qca,no-eeprom; takes presedence over
nvmem-cells. I think a different example is needed,
because the driver can only reads from one calibration
source per device.
5. (re-added) chip list (based on data from ath9k's pci.c)
Added binding .yaml to MAINTAINERS.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210924223509.52525-1-chunkeey@gmail.com
new thing:
New boards: Firefly roc-rk3399-pc-pls and rk3328-pc; Scarlet-Dumo
tablet variant; Rock Pi 4 A+, B+; Pine64 Quartz64-A (rk3566-based)
Big additions for the rk3568: tsadc; saradc; gpio-support; gmac 1+2;
watchdog; pmu; io-domains and enabling these new things on the
rk3568-evb.
Addition of the rk3566 - a variant of the rk3568 with slightly less
peripherals.
SFC (serial flash controller) for rk3308 and px30 (including the
Odroid Go2)
Support for the rk3399's second image signal processor and its coresight
component. And camera + vpu support on px30.
A number of smaller additions to multiple boards (Rock Pi 4, Pinebook Pro
and helios64, lion-haikou, Odroid-Go2) and cleanups in some parts.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmFReesQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgaOAB/9GKqxpGASvceWq1ZBflL1VLHBWUj8LsK5l
gcHqDtafPuUyXx8fAbD7ND+Rwg9syBHY1p5VnXLqem4iHAluLGFAVAdjjNEVhytV
S6CAcrAcwk8sWjRxN/8ivNKTx7mhXKZAyytvZfRcox2f8oUwuuigchuJxiGK24LW
4XsuMrHkwijPyr1JjFwTbqgdMkIICCPBWpRI0RQHSTulDFCBCEfussYPIw8H+iQ5
KTy1rr7GdpLPIVCOXiHM4KJ2/Uy+a6C8049dExe+Gwg92kj7EhRb3kub+eLZqbJT
6vapPbI0AFiirZ1RI2Gf2yUUAI1yZEB4ABxWVD1yZot0+hGuUIBT
=jjAv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=5zhA
-----END PGP SIGNATURE-----
Merge tag 'v5.16-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
This contains the parts that were originally meant for 5.15 + some
new thing:
New boards: Firefly roc-rk3399-pc-pls and rk3328-pc; Scarlet-Dumo
tablet variant; Rock Pi 4 A+, B+; Pine64 Quartz64-A (rk3566-based)
Big additions for the rk3568: tsadc; saradc; gpio-support; gmac 1+2;
watchdog; pmu; io-domains and enabling these new things on the
rk3568-evb.
Addition of the rk3566 - a variant of the rk3568 with slightly less
peripherals.
SFC (serial flash controller) for rk3308 and px30 (including the
Odroid Go2)
Support for the rk3399's second image signal processor and its coresight
component. And camera + vpu support on px30.
A number of smaller additions to multiple boards (Rock Pi 4, Pinebook Pro
and helios64, lion-haikou, Odroid-Go2) and cleanups in some parts.
* tag 'v5.16-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (65 commits)
arm64: dts: rockchip: add phandles to muxed i2c buses on rk3368-lion
arm64: dts: rockchip: define iodomains for rk3368-lion
arm64: dts: rockchip: fix LDO_REG4 / LDO_REG7 confusion on rk3368-lion
arm64: dts: rockchip: align operating-points table name with dtschema
arm64: dts: rockchip: hook up camera on px30-evb
arm64: dts: rockchip: add isp node for px30
arm64: dts: rockchip: add Coresight debug range for RK3399
arm64: dts: rockchip: Correct regulator for USB host on Odroid-Go2
arm64: dts: rockchip: fix PCI reg address warning on rk3399-gru
arm64: dts: rockchip: add saradc to rk3568-evb1-v10
arm64: dts: rockchip: Fix GPU register width for RK3328
arm64: dts: rockchip: Re-add interrupt-names for RK3399's vpu
arm64: dts: rockchip: add missing rockchip,grf property to rk356x
arm64: dts: rockchip: add RK3399 Gru gpio-line-names
arm64: dts: rockchip: Enable SFC for Odroid Go Advance
arm64: dts: rockchip: Add SFC to RK3308
arm64: dts: rockchip: Add SFC to PX30
arm64: dts: rockchip: add thermal support to Quartz64 Model A
arm64: dts: rockchip: add rk3568 tsadc nodes
arm64: dts: rockchip: add rk356x gpio debounce clocks
...
Link: https://lore.kernel.org/r/4439872.CQOukoFCf9@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix issues reported by dtbs_check
- Enable DMAs, DP, USB, NAND on various boards
- Add description for irps5401
- Add pinctrl description
- Add psgtr description for usb3, sata and DP
- Start to use nvmem alias for eeprom reference
- Clean up aliases list
- Wire qspi and usb3.0
- Add support for zcu102-rev1.1
- Couple of minor fixes and sync patches
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYUGo/gAKCRDKSWXLKUoM
IdIJAJ9kAd96FWmyr9o/CM0iXUU+aefNlACfUtuOkYt4zGmfdLpMUK0jlY0auSQ=
=nzU4
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=hI0/
-----END PGP SIGNATURE-----
Merge tag 'zynqmp-dt-for-v5.16' of https://github.com/Xilinx/linux-xlnx into arm/dt
arm64: dts: ZynqMP DT changes for v5.16
- Fix issues reported by dtbs_check
- Enable DMAs, DP, USB, NAND on various boards
- Add description for irps5401
- Add pinctrl description
- Add psgtr description for usb3, sata and DP
- Start to use nvmem alias for eeprom reference
- Clean up aliases list
- Wire qspi and usb3.0
- Add support for zcu102-rev1.1
- Couple of minor fixes and sync patches
* tag 'zynqmp-dt-for-v5.16' of https://github.com/Xilinx/linux-xlnx: (36 commits)
arm64: zynqmp: Wire psgtr for zc1751-xm013
arm64: zynqmp: Enable xlnx,zynqmp-dwc3 driver for xilinx boards
arm64: zynqmp: Enable gpio and qspi for zc1275-revA
arm64: zynqmp: Fix serial compatible string
arm64: zynqmp: Remove not documented is-dual property
arm64: zynqmp: Add psgtr description to zc1751 dc1 board
arm64: zynqmp: Add support for zcu102-rev1.1 board
arm64: zynqmp: Remove description for 8T49N287 and si5382 chips
arm64: zynqmp: Sync psgtr node location with zcu104-revA
arm64: zynqmp: Add reset description for sata
arm64: zynqmp: Move rtc to different location on zcu104-revA
arm64: zynqmp: Wire qspi on multiple boards
arm64: zynqmp: Remove information about dma clock on zcu106
arm64: zynqmp: Update rtc calibration value
arm64: zynqmp: Add note about UHS mode on some boards
arm64: zynqmp: Move DP nodes to the end of file on zcu106
arm64: zynqmp: Remove can aliases from zc1751
arm64: zynqmp: Add reset-on-timeout to all boards and modify default timeout value
arm64: zynqmp: List reset property for ethernet phy
arm64: zynqmp: Add nvmem alises for eeproms
...
Link: https://lore.kernel.org/r/b1cbd05d-ab40-e1fc-4001-6cf88e1e81f9@monstr.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The UMS512 also uses the same serial device with SC9836.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210928095229.233572-3-zhang.lyra@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The original binding was allowing any combination of usb2-phy and
usb3-phy in the phys and phy-names properties.
However, the current binding enforces that those properties must be a
list of usb2-phy and usb3-phy, with exactly one element, effectively
making usb2-phy the only value being valid.
Let's rework the properties description to allow either one or two
element picked with values either usb2-phy or usb3-phy. The rest of the
tooling makes sure that we don't get any duplicate value, so this should
be what we want.
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210927073514.14334-2-maxime@cerno.tech
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SMSC USB3503 USB Hub Controller is supported by Linux thanks to
its device tree binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: Dongjin Kim <tobetter@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210927073514.14334-1-maxime@cerno.tech
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to support OTG mode we need these new properties:
- interrupt
- nvidia,pmc
Add the new properties to the binding.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210912181718.1328-3-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A variant of the TI TPS 6598x Type-C Port Switch and Power Delivery
controller known as Apple CD321x is present on boards with Apple SoCs
such as the M1. Add its compatible to the device tree binding.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20210928155502.71372-2-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Besides vdda-pll and vdda-phy-dpdm, vdd-supply is a required supply for
PHY digital circuit operation. Add it for correctness and completeness.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210928022002.26286-2-shawn.guo@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This adds the DT binding for the i.MX8MM VPU blk-ctrl.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds the DT binding for the i.MX8MM VPU blk-ctrl.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add toradex,colibri-imx6ull-emmc for our new Colibri iMX6ULL 1GB (eMMC)
Module and the carrier boards (so far only Colibri Evaluation Board) it
may be mated in.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The empty memory nodes, where no memory resides in, are allowed.
The NUMA node IDs are still valid and parsed, but memory may be
added to them through hotplug afterwards. Currently, QEMU fails
to boot when multiple empty memory nodes are specified. It's
caused by device-tree population failure and duplicated memory
node names.
The device-tree specification doesn't provide how empty NUMA
nodes are handled. Besides, I finds difficulty to get where
this case is documented. So lets add a section for empty memory
nodes to cover it in NUMA binding document.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20210927064119.127285-2-gshan@redhat.com
Signed-off-by: Rob Herring <robh@kernel.org>
Drop another redundant maxItems that snuck into w1-gpio binding.
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the
same size as the list is redundant and can be dropped. Note that is DT
schema specific behavior and not standard json-schema behavior. The tooling
will fixup the final schema adding any unspecified minItems/maxItems.
Fixes: dd2c898bc2 ("dt-bindings: w1: Convert 1-Wire GPIO binding to a schema")
Cc: Daniel Mack <zonque@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
make dtbs_check:
arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dt.yaml: bridge@2c: reg:0:0: 45 was expected
According to the datasheet, the I2C address can be either 0x2c or 0x2d,
depending on the ADDR control input.
Fixes: e3896e6ddd ("dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Link: https://lore.kernel.org/r/08f73c2aa0d4e580303357dfae107d084d962835.1632486753.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Add a compatible string for the uart binding of NXP S32G2 platforms. Here
we use "s32v234-linflexuart" as fallback since the current linflexuart
driver can still work on S32G2.
Signed-off-by: Chester Lin <clin@suse.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Convert the FSL LINFlexD UART binding to json-schema.
Signed-off-by: Chester Lin <clin@suse.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Document the compatible string for the LX2160A system that is part of
the BlueBox 3. Also add a separate compatible string for Rev A, since
technically it uses a different device tree.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
For supporting SI units in "bias-pull-down" & "bias-pull-up",
change pull up/down description
and add "mediatek,rsel_resistance_in_si_unit" description.
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Link: https://lore.kernel.org/r/20210924080632.28410-3-zhiyong.tao@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Required for validation of power-supplies from power-supply.yaml.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The driver is for codec NAU88L21 of Nuvoton Technology Corporation.
The NAU88L21 is an ultra-low power high performance audio codec that
supports both analog and digital audio functions.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://lore.kernel.org/r/20211001103108.3297848-1-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Another round of removing redundant minItems/maxItems from new schema in
the recent merge window.
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the
same size as the list is redundant and can be dropped. Note that is DT
schema specific behavior and not standard json-schema behavior. The tooling
will fixup the final schema adding any unspecified minItems/maxItems.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Marek Vasut <marex@denx.de>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: dri-devel@lists.freedesktop.org
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210928222920.2204761-1-robh@kernel.org
The graph schema doesn't allow custom properties on endpoint nodes for
'#/properties/port' and '#/$defs/port-base' should be used instead. This
doesn't matter until 'unevaluatedProperties' support is implemented.
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Jacopo Mondi <jacopo@jmondi.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "Paul J. Murphy" <paul.j.murphy@intel.com>
Cc: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Link: https://lore.kernel.org/r/20210820001457.1705142-1-robh@kernel.org
Add new compatible to support Cadence Octal SPI(OSPI) controller on
Xilinx Versal SoCs, also add power-domains property to the properties
list and marked as required for Xilinx Versal OSPI compatible.
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Link: https://lore.kernel.org/r/1632478031-12242-3-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The old binding was covering the whole DMU block space (DMU block
contains CRU block which contains USB PHY). It was a bad design,
overkill and a non-generic solution.
Northstar's USB 2.0 PHY is a small block (part of the CRU MFD) and
binding should be designed to represent that properly. Rework the
binding to map just PHY with the "reg" property and use syscon to
reference shared register that controls block access.
The old binding is deprecated now.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210913080024.6951-2-zajec5@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Manu's codeaurora.org email address bounces. Before he comes
back with his new email, fill Vinod's address in there.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210927071639.6225-1-shawnguo@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the clock dt-binding file for i.MX8ULP.
For pcc node, it will also be used as a reset controller,
so add the '#reset-cells' property description and add the
pcc reset IDs.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20210914065208.3582128-2-ping.bai@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Add the compatible for the px30-variant of the rkisp
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some variants have one irq signaling all of MI, MIPI and ISP events
while some rkisp1 variants use separate irqs for each.
Adapt the binding to handle both cases.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Having a clock name as "pclk_isp" suggests really hard a remnant from
the vendor kernel.
Right now no driver _and_ no devicetree actually uses this clock name
so there is still time to fix that naming.
Therefore drop the "_isp" suffix and only name it pclk.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add missing required clocks and supply regulator properties for the
sensor input clock and vdd, vdd_io and vaa supply regulators.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Convert mt9p031 sensor bindings to yaml schema. Also update the
MAINTAINERS entry.
Although input-clock-frequency and pixel-clock-frequency have not been
definded as endpoint propierties in the textual bindings, the sensor
does parse them from the endpoint. Thus move these properties to the
endpoint in the new yaml bindings.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add dt-bindings for Aspeed UART routing controller.
Signed-off-by: Oskar Senft <osk@google.com>
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210927023053.6728-4-chiawei_wang@aspeedtech.com
Convert the bindings of Aspeed LPC from text file into YAML schema.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Link: https://lore.kernel.org/r/20210927023053.6728-3-chiawei_wang@aspeedtech.com
[robh: Add 'additionalProperties: false' in child nodes and #reset-cells]
Signed-off-by: Rob Herring <robh@kernel.org>
There are couple of revisions of SOMs (k26) and associated carrier cards
(kv260).
SOM itself has two major versions:
sm-k26 - SOM with EMMC
smk-k26 - SOM without EMMC used on starter kit with preprogrammed firmware
in QSPI.
SOMs are describing only devices available on the SOM or connections which
are described in specification (for example UART, fwuen).
When SOM boots out of QSPI it uses limited number of peripherals defined by
the specification and present in sm(k)-k26 dtses.
Then a carrier card (CC) detection is happening and DT overlay is applied
to brings new functionality. That's why DT overlays are used. The name is
composed together with SOM name and CC name that's why DT overlays with
these names are generated to make sure they can be used together.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1ba32590670434b650bacf6410a65579dd30b38b.1632294439.git.michal.simek@xilinx.com
A few *gce.h file paths are not in 'dt-bindings/gce/<chip>-gce.h'
format. To fix it, replace 'dt-binding' with 'dt-bindings'
Fixes: 0553fb5168 ("dt-bindings: mailbox: add definition for mt8195")
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210922070845.5108-1-miles.chen@mediatek.com
Signed-off-by: Rob Herring <robh@kernel.org>
The Apple PCIe host controller is a PCIe host controller with
multiple root ports present in Apple ARM SoC platforms, including
various iPhone and iPad devices and the "Apple Silicon" Macs.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Link: https://lore.kernel.org/r/20210921183420.436-4-kettenis@openbsd.org
Signed-off-by: Rob Herring <robh@kernel.org>
The auo,b101uan08.3 panel (already supported by this driver) has
a 3.3V rail that needs to be turned on. For previous users of
this panel this voltage was directly output by pmic. On a new
user (the not-yet-upstream sc7180-trogdor-mrbland board) we need
to turn the 3.3V rail on.
Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-3-yangcong5@huaqin.corp-partner.google.com
Qualcomm Generic Packet router aka GPR is the IPC mechanism found
in AudioReach next generation signal processing framework to perform
command and response messages between various processors.
GPR has concepts of static and dynamic port, all static services like
APM (Audio Processing Manager), PRM (Proxy resource manager) have
fixed port numbers where as dynamic services like graphs have dynamic
port numbers which are allocated at runtime. All GPR packet messages
will have source and destination domain and port along with opcode
and payload.
This support is added using existing APR driver to reuse most of
the code.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210927135559.738-5-srinivas.kandagatla@linaro.org
replace usage of qcom,apr-domain property with qcom,domain property so
that bindings and driver can be reused.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210927135559.738-3-srinivas.kandagatla@linaro.org
Convert APR bindings to yaml format so that we could add new bindings support.
All the dsp services bindings are now part of apr bindings instead
of adding them to audio bindings.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210927135559.738-2-srinivas.kandagatla@linaro.org
Add a new modem compatible string for QTI SC7280 SoCs and introduce the
"qcom,ext-regs" and "qcom,qaccept-regs" properties needed by the modem
sub-system running on SC7280 SoCs.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631886935-14691-4-git-send-email-sibis@codeaurora.org
Add MPSS PAS support for SC7280 SoCs.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631886935-14691-2-git-send-email-sibis@codeaurora.org
The K3 DSP binding example used the root-node with a SoC compatible
property originally to address the dt_binding_check warnings resulting
from using a value of 2 for #address-cells and #size-cells as per most
common usage on K3 SoCs. Clean this up and replace it with a generic soc
node to keep it agnostic of the SoC or board compatibles that are outside
the scope of this binding.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210927103811.11222-3-sinthu.raja@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The K3 R5F binding example used the root-node with a SoC compatible
property originally to address the dt_binding_check warnings resulting
from using a value of 2 for #address-cells and #size-cells as per most
common usage on K3 SoCs. Clean this up and replace it with a generic soc
node to keep it agnostic of the SoC or board compatibles that are outside
the scope of this binding.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210927103811.11222-2-sinthu.raja@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add mt8195 compatible to binding document. The description of required
properties are also modified to reflect the hardware change between
mt8183 and mt8195. The mt8195 doesn't have to control the scp clock on
kernel side.
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210924033935.2127-2-tinghan.shen@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Amlogic Meson6, Meson8, Meson8b and Meson8m2 SoCs embed an ARC EM4
controller for always-on operations, typically used for managing system
suspend.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210921192557.1610709-2-martin.blumenstingl@googlemail.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Document Kryo 560 CPUs found in Qualcomm Snapdragon 690 (SM6350).
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210923162204.21752-1-konrad.dybcio@somainline.org
Add Qualcomm Mailbox Protocol (QMP) property to replace the power domain
exposed by the AOSS QMP node.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631800770-371-4-git-send-email-sibis@codeaurora.org
The load state power-domain, used by the co-processors to notify the
Always on Subsystem (AOSS) that a particular co-processor is up/down,
suffers from the side-effect of changing states during suspend/resume.
However the co-processors enter low-power modes independent to that of
the application processor and their states are expected to remain
unaltered across system suspend/resume cycles. To achieve this behavior
let's drop the load state power-domain and replace them with the qmp
property for all SoCs supporting low power mode signalling.
Due to the current broken load state implementation, we can afford the
binding breakage that ensues and the remoteproc functionality will remain
the same when using newer kernels with older dtbs.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631800770-371-3-git-send-email-sibis@codeaurora.org
Remove the unused aoss-qmp header from the list of includes.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631800770-371-13-git-send-email-sibis@codeaurora.org
The power-domains exposed by AOSS QMP node are used to notify the Always
on Subsystem (AOSS) that a particular co-processor is up/down. These
co-processors enter low-power modes independent to that of the application
processor and their states are expected to remain unaltered across system
suspend/resume cycles. To achieve this behavior let's drop the load
power-domain and replace them with generic qmp_send interface instead.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631800770-371-2-git-send-email-sibis@codeaurora.org
This patch series adds support for Cadence's XSPI controller.
It supports 3 work modes.
1. ACMD (auto command) work mode
ACMD name is because it uses auto command engine in the controller.
It further has 2 modes PIO and CDMA (command DMA).
The CDMA work mode is dedicated for high-performance application
where very low software overhead is required. In this mode the
Command Engine is programmed by the series of linked descriptors
stored in system memory. These descriptors provide commands to execute
and store status information for finished commands.
The PIO mode work mode is dedicated for single operation where
constructing a linked list of descriptors would require too
much effort.
2. STIG (Software Triggered Instruction Generator) work mode
In STIG mode, controller sends low-level instructions to memory.
Each instruction is 128-bit width. There is special instruction
DataSequence which carries information about data phase.
Driver uses Slave DMA interface to transfer data as only this
interface can be used in STIG work mode.
3. Direct work mode
This work mode allows sending data without invoking any command through
the slave interface.
Currently only STIG work mode is enabled, remaining work modes will
be added later.
Changes since v5:
1. Added adjust_op_size to adjust op size according to sdma size.
Changes since v4:
1. Changed reg region names and lengths as suggested by Rob.
Changes since v3:
1. Removed ACMD PIO mode.
2. Return IRQ_HANDLED only for handled interrupts.
3. DT binding changes.
Changes since v2:
1. Removed extra lock around exec_op.
2. Removed PHY parameters setting from the driver, those will be
handled by bootstrap pins available in the controller.
Changes since v1:
1. Use ACMD PIO work mode for NOR read, program and erase operations,
for everything else use STIG(Software Triggered Instruction
Generator) work mode.
2. Changes suggested by Lukas.
Parshuram Thombare (2):
spi: cadence: add dt-bindings documentation for Cadence XSPI
controller
spi: cadence: add support for Cadence XSPI controller
.../devicetree/bindings/spi/cdns,xspi.yaml | 77 +++
drivers/spi/Kconfig | 12 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-cadence-xspi.c | 640 +++++++++++++++++++++
4 files changed, 730 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/cdns,xspi.yaml
create mode 100644 drivers/spi/spi-cadence-xspi.c
--
2.7.4
Update the MSI controller binding to add an msi-ranges property
that specifies how MSIs map onto regular interrupts on some other
interrupt controller.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Link: https://lore.kernel.org/r/20210921183420.436-3-kettenis@openbsd.org
Signed-off-by: Rob Herring <robh@kernel.org>
Split the MSI controller bindings from the MSI binding document
into DT schema format using json-schema.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Link: https://lore.kernel.org/r/20210921183420.436-2-kettenis@openbsd.org
Signed-off-by: Rob Herring <robh@kernel.org>
This contains a few fixes for the sdm660 driver:
- sdm660: Fix id of slv_cnoc_mnoc_cfg
- sdm660: Correct NOC_QOS_PRIORITY shift and mask
- sdm660: Add missing a2noc qos clocks
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=IBFP
-----END PGP SIGNATURE-----
Merge tag 'icc-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus
Georgi writes:
interconnect fixes for v5.15
This contains a few fixes for the sdm660 driver:
- sdm660: Fix id of slv_cnoc_mnoc_cfg
- sdm660: Correct NOC_QOS_PRIORITY shift and mask
- sdm660: Add missing a2noc qos clocks
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: sdm660: Add missing a2noc qos clocks
dt-bindings: interconnect: sdm660: Add missing a2noc qos clocks
interconnect: qcom: sdm660: Correct NOC_QOS_PRIORITY shift and mask
interconnect: qcom: sdm660: Fix id of slv_cnoc_mnoc_cfg
Add compatible for sc7280 SoC.
Signed-off-by: Rajesh Patil <rajpat@codeaurora.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1632725335-4570-1-git-send-email-rajpat@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds the documentation for the devicetree bindings of the Mstar
MSC313e RTC driver, found from MSC313e SoCs and newer.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210823171613.18941-2-romain.perier@gmail.com
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
Driver Changes:
- Conversions to dev_err_probe() helper
- rockchip: Various build improvements, Use
DRM_BRIDGE_ATTACH_NO_CONNECTOR for LVDS and RGB
- panel: New panel-edp driver
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYUwwfAAKCRDj7w1vZxhR
xaiVAP0VRNLapEFzXiSKz4BC3lK1bxMW9EA41fw6QqOgc1W7dgD7BDc07sSR4i1h
1eAAYyuygCFH9JPaDmjTB4uH+X+QKgw=
=wh6l
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-09-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.15:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
Driver Changes:
- Conversions to dev_err_probe() helper
- rockchip: Various build improvements, Use
DRM_BRIDGE_ATTACH_NO_CONNECTOR for LVDS and RGB
- panel: New panel-edp driver
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923074522.zaja7mzxeimxf6g3@gilmour
Add support for the pinconf DT property output-enable, output-disable
so that output can be enabled/disabled.
Signed-off-by: Subbaraman Narayanamurthy <quic_subbaram@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1631588246-4811-2-git-send-email-quic_subbaram@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
net/mptcp/protocol.c
977d293e23 ("mptcp: ensure tx skbs always have the MPTCP ext")
efe686ffce ("mptcp: ensure tx skbs always have the MPTCP ext")
same patch merged in both trees, keep net-next.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds DT binding document for zynqmp modepin GPIO controller.
Modepin GPIO controller has four GPIO pins which can be configurable
as input or output.
Modepin driver is a bridge between the peripheral driver and GPIO pins.
It has set and get APIs for accessing GPIO pins, based on the device-tree
entry of reset-gpio property in the peripheral driver, every pin can be
configured as input/output and trigger GPIO pin.
For more information please refer zynqMp TRM link:
Link: https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf
Chapter 2: Signals, Interfaces, and Pins
Table 2-2: Clock, Reset, and Configuration Pins - PS_MODE
Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Add the binding for smi-sub-common. The SMI block diagram like this:
IOMMU
| |
smi-common
------------------
| .... |
larb0 larb7 <-max is 8
The smi-common connects with smi-larb and IOMMU. The maximum larbs number
that connects with a smi-common is 8. If the engines number is over 8,
sometimes we use a smi-sub-common which is nearly same with smi-common.
It supports up to 8 input and 1 output(smi-common has 2 output)
Something like:
IOMMU
| |
smi-common
---------------------
| | ...
larb0 sub-common ... <-max is 8
-----------
| | ... <-max is 8 too.
larb2 larb5
We don't need extra SW setting for smi-sub-common, only the sub-common has
special clocks need to enable when the engines access dram.
If it is sub-common, it should have a "mediatek,smi" phandle to point to
its smi-common. meanwhile the sub-common only has one gals clock.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210914113703.31466-3-yong.wu@mediatek.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Add mt8195 smi supporting in the bindings.
In mt8195, there are two smi-common HW, one is for vdo(video output),
the other is for vpp(video processing pipe). They connect with different
smi-larbs, then some setting(bus_sel) is different. Differentiate them
with the compatible string.
Something like this:
IOMMU(VDO) IOMMU(VPP)
| |
SMI_COMMON_VDO SMI_COMMON_VPP
---------------- ----------------
| | ... | | ...
larb0 larb2 ... larb1 larb3 ...
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210914113703.31466-2-yong.wu@mediatek.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
UAPI Changes:
Cross-subsystem Changes:
- dma-buf: Avoid a warning with some allocations, Remove
DMA_FENCE_TRACE macros
Core Changes:
- bridge: New helper to git rid of panels in drivers
- fence: Improve dma_fence_add_callback documentation, Improve
dma_fence_ops->wait documentation
- ioctl: Unexport drm_ioctl_permit
- lease: Documentation improvements
- fourcc: Add new macro to determine the modifier vendor
- quirks: Add the Steam Deck, Chuwi HiBook, Chuwi Hi10 Pro, Samsung
Galaxy Book 10.6, KD Kurio Smart C15200 2-in-1, Lenovo Ideapad D330
- resv: Improve the documentation
- shmem-helpers: Allocate WC pages on x86, Switch to vmf_insert_pfn
- sched: Fix for a timer being canceled too soon, Avoid null pointer
derefence if the fence is null in drm_sched_fence_free, Convert
drivers to rely on its dependency tracking
- ttm: Switch to kerneldoc, new helper to clear all DMA mappings, pool
shrinker optitimization, Remove ttm_tt_destroy_common, Fix for
unbinding on multiple drivers
Driver Changes:
- bochs: New PCI IDs
- msm: Fence ordering impromevemnts
- stm: Add layer alpha support, zpos
- v3d: Fix for a Vulkan CTS failure
- vc4: Conversion to the new bridge helpers
- vgem: Use shmem helpers
- virtio: Support mapping exported vram
- zte: Remove obsolete driver
- bridge: Probe improvements for it66121, enable DSI EOTP for anx7625,
errors propagation improvements for anx7625
- panels: 60fps mode for otm8009a, New driver for Samsung S6D27A1
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYULyqgAKCRDj7w1vZxhR
xVR1AP96dB3rfB0uIEvujMROBqupaKbYvP/7qilfMGIwLotDqQD/RKNB+EAaoHtT
hRA7zmz7kwYA/l8PihmF1zoFddX21gA=
=nFnK
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-09-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for $kernel-version:
UAPI Changes:
Cross-subsystem Changes:
- dma-buf: Avoid a warning with some allocations, Remove
DMA_FENCE_TRACE macros
Core Changes:
- bridge: New helper to git rid of panels in drivers
- fence: Improve dma_fence_add_callback documentation, Improve
dma_fence_ops->wait documentation
- ioctl: Unexport drm_ioctl_permit
- lease: Documentation improvements
- fourcc: Add new macro to determine the modifier vendor
- quirks: Add the Steam Deck, Chuwi HiBook, Chuwi Hi10 Pro, Samsung
Galaxy Book 10.6, KD Kurio Smart C15200 2-in-1, Lenovo Ideapad D330
- resv: Improve the documentation
- shmem-helpers: Allocate WC pages on x86, Switch to vmf_insert_pfn
- sched: Fix for a timer being canceled too soon, Avoid null pointer
derefence if the fence is null in drm_sched_fence_free, Convert
drivers to rely on its dependency tracking
- ttm: Switch to kerneldoc, new helper to clear all DMA mappings, pool
shrinker optitimization, Remove ttm_tt_destroy_common, Fix for
unbinding on multiple drivers
Driver Changes:
- bochs: New PCI IDs
- msm: Fence ordering impromevemnts
- stm: Add layer alpha support, zpos
- v3d: Fix for a Vulkan CTS failure
- vc4: Conversion to the new bridge helpers
- vgem: Use shmem helpers
- virtio: Support mapping exported vram
- zte: Remove obsolete driver
- bridge: Probe improvements for it66121, enable DSI EOTP for anx7625,
errors propagation improvements for anx7625
- panels: 60fps mode for otm8009a, New driver for Samsung S6D27A1
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Thu 16 Sep 2021 17:30:50 AEST
# gpg: using EDDSA key 5C1337A45ECA9AEB89060E9EE3EF0D6F671851C5
# gpg: Can't check signature: No public key
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916073132.ptbbmjetm7v3ufq3@gilmour
Add compatible and constants for the power domains exposed by the RPMH
in the Qualcomm SM6350 platform.
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210820203105.229764-3-konrad.dybcio@somainline.org
Add compatible and constants for the power domains exposed by the RPM
in the Qualcomm MSM8953 platform.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Adam Skladowski <a_skl39@protonmail.com>
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210825170233.19859-1-sireeshkodali1@gmail.com
The driver was updated to add SAW2 v4.1 support for new SoCs: document
the new compatibles.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210729155609.608159-6-angelogioacchino.delregno@somainline.org
In an attempt to make it more broadly known that other projects are
equal consumers / users of the device tree bindings, add a note to
submitting patches to say that extra care and consideration may need to
be taken when updating existing bindings.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tom Rini <trini@konsulko.com>
Link: https://lore.kernel.org/r/20210910142419.5237-1-trini@konsulko.com
Signed-off-by: Rob Herring <robh@kernel.org>
commit 82d3ec1d89 ("ASoC: Use schema reference for sound-name-prefix")
added name-prefix.yaml schema and the same reference was used in couple
of other schemas. But this is causing following warning and the same is
fixed in current patch.
Documentation/devicetree/bindings/sound/nxp,tfa989x.example.dt.yaml:
audio-codec@34: 'sound-name-prefix' does not match any of the regexes:
'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
Documentation/devicetree/bindings/sound/nxp,tfa989x.example.dt.yaml:
audio-codec@36: 'sound-name-prefix' does not match any of the regexes:
'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
Fixes: 82d3ec1d89 ("ASoC: Use schema reference for sound-name-prefix")
Reported-by: Rob Herring <robh+dt@kernel.org>
Suggested-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1632238860-16947-1-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the nodename in the example with spi-nand from 'spi-flash@1'
to 'flash@1' to make the schema uniform with both spi-nand and spi-nor
flashes. jedec,spi-nor.yaml uses 'flash@' nodename for spi-nor flashes,
so make the spi-nand examples in dt-bindings use it too for uniformity.
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210920142713.129295-3-a-nandan@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All existing boards with sifive,e51 and sifive,u54-mc use it on top of
sifive,rocket0 compatible:
arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dt.yaml: cpu@0: compatible: 'oneOf' conditional failed, one must be fixed:
['sifive,e51', 'sifive,rocket0', 'riscv'] is too long
Additional items are not allowed ('riscv' was unexpected)
Additional items are not allowed ('sifive,rocket0', 'riscv' were unexpected)
'riscv' was expected
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210920132559.151678-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
The arm,vexpress-juno binding is missing 'ranges', 'arm,vexpress,site', and
'arm,hbi' properties. Add these and and restrict additional properties to
be nodes only.
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210819184239.1192395-3-robh@kernel.org
Commit 9d0a36ddcc ("arm64: dts: fvp/juno: Fix bus node names") changed
'motherboard' to 'motherboard-bus', but didn't update the schema. In the
mean time, the simple-bus schema started requiring child nodes to have a
unit-address. Update the schema to address both of these issues.
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210819184239.1192395-2-robh@kernel.org
eDP panels generally contain almost everything needed to control them
in their EDID. This comes from their DP heritage were a computer needs
to be able to properly control pretty much any DP display that's
plugged into it.
The one big issue with eDP panels and the reason that we need a panel
driver for them is that the power sequencing can be different per
panel.
While it is true that eDP panel sequencing can be arbitrarily complex,
in practice it turns out that many eDP panels are compatible with just
some slightly different delays. See the contents of the bindings file
introduced in this patch for some details.
The fact that eDP panels are 99% probable and that the power
sequencing (especially power up) can be compatible between many panels
means that there's a constant desire to plug multiple different panels
into the same board. This could be for second sourcing purposes or to
support multiple SKUs (maybe a 11" and a 13", for instance).
As discussed [1], it should be OK to support this by adding two
properties to the device tree to specify the delays needed for
powering up the panel the first time. We'll create a new "edp-panel"
bindings file and define the two delays that might need to be
specified. NOTE: in the vast majority of the cases (HPD is hooked up
and isn't glitchy or is debounced) even these delays aren't needed.
[1] https://lore.kernel.org/r/CAD=FV=VZYOMPwQZzWdhJGh5cjJWw_EcM-wQVEivZ-bdGXjPrEQ@mail.gmail.com
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.1.I1116e79d34035338a45c1fc7cdd14a097909c8e0@changeid
Earlier as part of series [0], support for ADMAIF and I/O modules (such
as I2S, DMIC and DSPK) was added. This series aims at exposing some of
the AHUB internal modules (listed below), which can be used for audio
pre or post processing.
* SFC (Sampling Frequency Converter)
* MVC (Master Volume Control)
* AMX (Audio Multiplexer)
* ADX (Audio Demultiplexer)
* Mixer
These modules can be plugged into audio paths and relevant processing
can be done. The MUX routes are extended to allow add or remove above
modules in the path via mixer controls. This is similar to how specific
ADMAIF channels are connected to relevant I/O module instances at the
moment.
Some of these modules can alter PCM parameters. Consider example of
resampler (44.1 -> 48 kHz) in the path.
aplay(44.1 kHz) -> ADMAIF -> SFC -> (48 kHz) I2S -> (48kHz) Codec
The modules following SFC should be using converted sample rate and DAIs
need to be configured accordingly. The audio-graph driver provides a
mechanism to fixup the new parameters which can be specified in DT for a
given DAI. Then core uses these new values via fixup callback and then
pass it to respective DAIs hw_param() callback. The "convert-rate",
described in [1], property can be used when there is rate conversion in
the audio path. Similarly "convert-channels" can be used when there is
channel conversion in the path. There is no "convert-xxx" property for
sample size conversions. It can be added if necessary.
[0] https://www.lkml.org/lkml/2020/7/21/1357
[1] Documentation/devicetree/bindings/sound/audio-graph-port.yaml
Changelog
=========
v1 -> v2
--------
* Put comments for soft reset application in the drivers.
* Split out mute/volume control logic in put() calls of MVC driver and
use separate callbacks for the respective kcontrols.
* Update kcontrol put() callback in MVC driver to return 1 whenever
there is change. Similar change is done in other drivers too.
* Use name-prefix.yaml reference for the driver documentation now.
* Add sound-name-prefix pattern for MIXER driver and use prefix
accordingly in DT.
Sameer Pujar (13):
ASoC: soc-pcm: Don't reconnect an already active BE
ASoC: simple-card-utils: Increase maximum DAI links limit to 512
ASoC: audio-graph: Fixup CPU endpoint hw_params in a BE<->BE link
ASoC: dt-bindings: tegra: Few more Tegra210 AHUB modules
ASoC: tegra: Add routes for few AHUB modules
ASoC: tegra: Add Tegra210 based MVC driver
ASoC: tegra: Add Tegra210 based SFC driver
ASoC: tegra: Add Tegra210 based AMX driver
ASoC: tegra: Add Tegra210 based ADX driver
ASoC: tegra: Add Tegra210 based Mixer driver
arm64: defconfig: Enable few Tegra210 based AHUB drivers
arm64: tegra: Add few AHUB devices for Tegra210 and later
arm64: tegra: Extend APE audio support on Jetson platforms
.../bindings/sound/nvidia,tegra210-adx.yaml | 76 +
.../bindings/sound/nvidia,tegra210-ahub.yaml | 20 +
.../bindings/sound/nvidia,tegra210-amx.yaml | 76 +
.../bindings/sound/nvidia,tegra210-mixer.yaml | 74 +
.../bindings/sound/nvidia,tegra210-mvc.yaml | 76 +
.../bindings/sound/nvidia,tegra210-sfc.yaml | 73 +
arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 1554 ++++++++-
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 120 +
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 1493 +++++++-
.../arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi | 1520 ++++++++-
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 116 +
arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts | 876 +++++
arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 876 +++++
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 77 +
arch/arm64/configs/defconfig | 5 +
include/sound/simple_card_utils.h | 2 +-
sound/soc/generic/audio-graph-card.c | 4 +-
sound/soc/soc-pcm.c | 4 +
sound/soc/tegra/Kconfig | 48 +
sound/soc/tegra/Makefile | 10 +
sound/soc/tegra/tegra210_adx.c | 531 +++
sound/soc/tegra/tegra210_adx.h | 72 +
sound/soc/tegra/tegra210_ahub.c | 511 ++-
sound/soc/tegra/tegra210_amx.c | 600 ++++
sound/soc/tegra/tegra210_amx.h | 93 +
sound/soc/tegra/tegra210_mixer.c | 674 ++++
sound/soc/tegra/tegra210_mixer.h | 100 +
sound/soc/tegra/tegra210_mvc.c | 645 ++++
sound/soc/tegra/tegra210_mvc.h | 117 +
sound/soc/tegra/tegra210_sfc.c | 3549 ++++++++++++++++++++
sound/soc/tegra/tegra210_sfc.h | 78 +
31 files changed, 13647 insertions(+), 423 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml
create mode 100644 sound/soc/tegra/tegra210_adx.c
create mode 100644 sound/soc/tegra/tegra210_adx.h
create mode 100644 sound/soc/tegra/tegra210_amx.c
create mode 100644 sound/soc/tegra/tegra210_amx.h
create mode 100644 sound/soc/tegra/tegra210_mixer.c
create mode 100644 sound/soc/tegra/tegra210_mixer.h
create mode 100644 sound/soc/tegra/tegra210_mvc.c
create mode 100644 sound/soc/tegra/tegra210_mvc.h
create mode 100644 sound/soc/tegra/tegra210_sfc.c
create mode 100644 sound/soc/tegra/tegra210_sfc.h
--
2.7.4
Correct several errors in rt5682s dtschema:
1. The examples should be under "examples":
'example' is not one of ['$id', '$schema', 'title', 'description', 'examples', ...
2. Missing type for vendor properties
3. clock-names should be an array:
properties:clock-names:items: {'const': 'mclk'} is not of type 'array'
4. Example DTS should include headers:
[scripts/Makefile.lib:386: Documentation/devicetree/bindings/sound/realtek,rt5682s.example.dt.yaml] Error 1
5. Node name in example DTS misses unit address and does not match DT
convention (generic name):
Warning (reg_format): /example-0/rt5682s:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
6. Node address should be in size-cells:0 block in example DTS:
Warning (reg_format): /example-0/codec@1a:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Fixes: 50159fdb14 ("ASoC: dt-bindings: rt5682s: add bindings for rt5682s")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210920112106.140918-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds YAML schema for DT bindings of few AHUB modules.
These devices will be registered as ASoC components and bindings
will be used on Tegra210 and later chips. The bindings for below
mentioned modules are added:
* SFC (Sampling Frequency Converter)
* MVC (Master Volume Control)
* AMX (Audio Multiplexer)
* ADX (Audio Demultiplexer)
* Mixer
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Rob Herring <robh+dt@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1631551342-25469-5-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Revert fw_devlink tracking 'phy-handle' links. This broke at least a
few platforms. A better solution is being worked on.
- Add Samsung UFS binding which fell thru the cracks
- Doc reference fixes from Mauro
- Fix for restricted DMA error handling
-----BEGIN PGP SIGNATURE-----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=oM3e
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Revert fw_devlink tracking 'phy-handle' links. This broke at least a
few platforms. A better solution is being worked on.
- Add Samsung UFS binding which fell thru the cracks
- Doc reference fixes from Mauro
- Fix for restricted DMA error handling
* tag 'devicetree-fixes-for-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: arm: Fix Toradex compatible typo
of: restricted dma: Fix condition for rmem init
dt-bindings: arm: mediatek: mmsys: update mediatek,mmsys.yaml reference
dt-bindings: net: dsa: sja1105: update nxp,sja1105.yaml reference
dt-bindings: ufs: Add bindings for Samsung ufs host
Revert "of: property: fw_devlink: Add support for "phy-handle" property"
JetHome is trademark of IP Sokolov P.A., manufacturer of home automation
devices.
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210915085715.1134940-3-adeep@lexina.in
JetHome is a series of home automation controllers:
- Jethub D1 based on Amlogic A113X
- Jethub H1 based on AmLogic S905W
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210915085715.1134940-2-adeep@lexina.in
Fix warnings and errors in DT bindings
Add newline at end of file
Replace 'unevaluatedProperties' with 'additionalProperties'
Add spi context to DT example
Add #sound-dai-cells to DT example
Rename to 'cirrus,cs35l41.yaml'
Signed-off-by: David Rhodes <drhodes@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210915191422.2371623-1-drhodes@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Dumo is another variant of Scarlet, also known as the ASUS Chromebook
Tablet CT100. This is almost the same as Scarlet-Innolux, but uses a
specific calibration variant for the WiFi module.
Add an entry for the board compatibles.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210812094753.2359087-2-wenst@chromium.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add a basic dts for the Pine64 Quartz64 Model A Single Board Computer.
This board outputs on uart2 for debug.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210710151034.32857-5-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
ROCK Pi 4 got 2 more variants called A+ and B+.
Add the dt-bindings documentation for it.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210618181256.27992-2-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The new added properties are used for configuring burst length.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document the Lantiq Xway SoC series External Bus Unit (ETOP) bindings.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the Lantiq PMAC Device Tree binding documentation to json-schema.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the binding documentatoin for fixed-mmio-clock to YAML.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20210903152615.31453-1-kabel@kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
'reg' is the standard property for defining register banks/addresses. Add
it to use for the VCO register address and deprecate 'vco-offset'. This
will also allow for using standard node names with unit-addresses.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-clk@vger.kernel.org
Cc: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210913192816.1225025-5-robh@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This patch adds the new binding documentation for system clock
and functional clock on Mediatek MT8195.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210914021633.26377-2-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Some of these clocks are not referenced by the driver at all whereas
aud_ref_clk and core_bi_pll_test_se are but were missing from the
bindings. These clocks are optional (and not currently provided
anywhere) while "xo" and "sleep_clk" are mandatory.
Note that none of these clocks were used beforehand as the driver
referenced them by their global name.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20210911121340.261920-7-marijn.suijten@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add bindings for the Meraki MX64/MX65 series.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Currently only the SoC names are added. This patch expands these to add
the devices.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add device tree bindings document for the aspeed ast2600 adc device
driver.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210831071458.2334-3-billy_tsai@aspeedtech.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add additional AK09116 to the magnetometer driver which has the same
register mapping and scaling as the AK09112 device.
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20210825020738.35877-1-matt.ranostay@konsulko.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Update bindings to describe support for buffered and unbuffered external
voltage references selection, and add adi,internal-ref-microvolt for
internal voltage reference selection.
Signed-off-by: Liam Beguin <lvb@xiphos.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210815213309.2847711-5-liambeguin@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Document the snps,ref-clock-period-ns property that describes reference
clock period when it deviates from the default set value.
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/f5ea5bc3664a98a684ad4b699a1ac610e847176f.1630389452.git.baruch@tkos.co.il
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The uartlite device is a "soft" device. Many parameters, such as baud
rate, data bits, and the presence of a parity bit are configured before
synthesis and may not be changed (or discovered) at runtime. However, we
must know what these settings are in order to properly calculate the
uart timeout (and to inform the user about the actual baud of the uart).
These properties are present for out-of-tree bindings generated by
Xilinx's tools. However, they are also (mostly) present in in-tree
bindings. I chose current-speed over xlnx,baudrate primarily because it
seemed to be used by more existing bindings. Although these properties
are marked as "required", note that only current-speed is required by
the driver itself. Hopefully, this will allow for an easier transition.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20210826192154.3202269-3-sean.anderson@seco.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This converts the existing documentation for the uartlite binding to
json-schema.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20210826192154.3202269-2-sean.anderson@seco.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This helps validating DTS files.
Redundant generic descriptions (e.g. "The base address of the UART
register bank") were dropped and periph_clk was dropped from example as
not required.
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20210829131927.13682-1-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document the APQ8026 (based on MSM8226) SoC device-tree binding and the
LG G Watch R.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210911232707.259615-8-luca@z3ntu.xyz
Bitbanged 1-Wire buses are supported by Linux thanks to their device
tree binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: Daniel Mack <zonque@gmail.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210901091852.479202-39-maxime@cerno.tech
Signed-off-by: Rob Herring <robh@kernel.org>
The OV5640 sensor used in the example doesn't follow the binding and
omits the regulators. Add some to make the example valid.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210901091852.479202-27-maxime@cerno.tech
Signed-off-by: Rob Herring <robh@kernel.org>
The UBlox Neo 6M is supported by Linux thanks to its device tree
binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210901091852.479202-22-maxime@cerno.tech
Signed-off-by: Rob Herring <robh@kernel.org>
The ARM CCI-400 Interconnect is supported by Linux thanks to its device
tree binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210901091852.479202-7-maxime@cerno.tech
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the reserved memory bindings to DT schema format. The bindings
are split into schemas for clients, common reserved memory node
properties and a specific binding for shared-dma-pool.
Cc: devicetree-spec@vger.kernel.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210901091852.479202-6-maxime@cerno.tech
Convert Freescale/NXP DDR memory controller bindings to DT schema format
using json-schema.
Previous bindings were not listing all compatibles, so scan through
devicetree sources and drivers to get these.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210826113049.92962-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the current udc xilinx binding from text format to YAML
format/DT schema, and delete the legacy text binding file.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/20210826053433.1599019-1-shubhrajyoti.datta@xilinx.com
Signed-off-by: Rob Herring <robh@kernel.org>
Some people and companies may want to add more description
to there gpio pins. Add a gpio-line-names property to the
rockchip,gpio-bank.yaml file to reduce the notifications
from the existing mainline DT.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Following are the changes:
- Add json-schema for 'sound-name-prefix' documentation under
'name-perfix.yaml'
- Use schema references wherever needed.
- Remove txt based doc
Changelog
=========
v2 -> v3
--------
* Removed examples in patch 1/3 as suggested by Rob
* Added reviewed tag from Jerome for the series
* Added reviewed tag from Rob for patch 2/3
v1 -> v2
--------
* Provide top reference to name-prefix.yaml as suggested by Rob
for patch 2/3
* Dropped couple of unreachable email ids from Cc list in commit
message of patch 2/3
* No changes in remaining patches
Sameer Pujar (3):
ASoC: Add json-schema documentation for sound-name-prefix
ASoC: Use schema reference for sound-name-prefix
ASoC: Remove name-prefix.txt
.../devicetree/bindings/sound/name-prefix.txt | 24 ----------------------
.../devicetree/bindings/sound/name-prefix.yaml | 21 +++++++++++++++++++
.../bindings/sound/nvidia,tegra186-dspk.yaml | 9 +++-----
.../bindings/sound/nvidia,tegra210-dmic.yaml | 9 +++-----
.../bindings/sound/nvidia,tegra210-i2s.yaml | 9 +++-----
.../devicetree/bindings/sound/nxp,tfa989x.yaml | 9 +++-----
Documentation/devicetree/bindings/sound/rt5659.txt | 2 +-
.../bindings/sound/simple-audio-mux.yaml | 9 +++-----
8 files changed, 37 insertions(+), 55 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/name-prefix.txt
create mode 100644 Documentation/devicetree/bindings/sound/name-prefix.yaml
--
2.7.4
Document the compatible values for the remaining R-Car Gen3e SoCs: R-Car
H3e (R8A779M0), M3e (R8A779M2), M3Ne (R8A779M4), M3Ne-2G (R8A779M5), E3e
(R8A779M6), D3e (R8A779M7), and H3Ne (R8A779M8). These are different
gradings of R-Car Gen3 SoCs.
All R-Car Gen3e on-SoC devices are identical to the devices on the
corresponding R-Car Gen3 SoCs, and thus just use the compatible values
for the latter. The root compatible properties do gain an additional
value, to sort out integration issues if they ever arise.
Document the use of these SoCs on the Salvator-XS, ULCB (with and
without Kingfisher extension), Ebisu, and Draak development boards.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/55271d405112f327753945072cde5d158ab815b1.1628766192.git.geert+renesas@glider.be
Radxa Zero is a small form-factor SBC with an Amlogic S905Y2 chip.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210909102154.22710-2-christianshewitt@gmail.com
Add bindings for ON Semi CAT24C04 and CAT24C05 eeproms,
which are compatible with Atmel AT24C04.
Signed-off-by: Raag Jadav <raagjadav@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Allwinner R40 has 3 I2S controllers, compatible to those, found in H3.
Add R40/H3 compatible pair to DT bindings.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210912072914.398419-2-jernej.skrabec@gmail.com
Even though we've used the A80 PRCM driver for some time and a number of
boards using it already, we never had a binding for it. Let's add it
based on what the driver expects and the boards are providing.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-36-maxime@cerno.tech
Even though we've used the CPU configuration driver for some time and a
number of boards using it already, we never had a binding for it. Let's
add it based on what the driver expects and the boards are providing.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-35-maxime@cerno.tech
Even though both the driver and the device trees all use the
allwinner,sun50i-h6-de3-clk, we documented the compatible as
allwinner,sun50i-h6-de2-clk in the binding. Let's fix this.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-10-maxime@cerno.tech
zcu102 rev1.1 compare to rev1.0 is using by default different DDR memory
which requires different configuration. The reason for adding this file to
Linux kernel is that U-Boot fdtfile variable is composed based on board
revision (in eeprom) and dtb file should exist in standard distibutions for
passing it to Linux kernel.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/38bbbeb885f4d9ba466c43ab9b4d25190a3552fb.1623684253.git.michal.simek@xilinx.com
Add a documentation file to describe the Device Tree bindings for the
SPI controller found in Ingenic SoCs.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210830230139.21476-2-contact@artur-rojek.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
The Silergy SY8106A is a regulator controlled through i2c supported by
Linux with a matching device tree binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Ondrej Jirman <megous@megous.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210901091852.479202-34-maxime@cerno.tech
Signed-off-by: Mark Brown <broonie@kernel.org>
Simple audio amplifiers are supported by Linux with a matching device
tree binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: alsa-devel@alsa-project.org
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210901091852.479202-5-maxime@cerno.tech
Signed-off-by: Mark Brown <broonie@kernel.org>
The SPDIF Transmitter binding is used by Linux with a matching Device
Tree binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: alsa-devel@alsa-project.org
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210901091852.479202-4-maxime@cerno.tech
Signed-off-by: Mark Brown <broonie@kernel.org>
Bluetooth SCO Link are supported by Linux with a matching device tree
binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: alsa-devel@alsa-project.org
Cc: devicetree@vger.kernel.org
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210901091852.479202-3-maxime@cerno.tech
Signed-off-by: Mark Brown <broonie@kernel.org>
Even though we had the wm8978 driver for some time and a number of
boards using it already, we never had a binding for it. Let's add it
based on what the driver expects and the boards are providing.
Cc: alsa-devel@alsa-project.org
Cc: devicetree@vger.kernel.org
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: patches@opensource.cirrus.com
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210901091852.479202-2-maxime@cerno.tech
Signed-off-by: Mark Brown <broonie@kernel.org>
Since schema name-prefix.yaml is available and references are updated,
remove txt based doc.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1630686919-19495-4-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The 'sound-name-prefix' is used to prepend suitable strings to a
component widgets or controls. This is helpful when there are
multiple instances of the same component. Add relevant json-schema
and is inspired from sound-name-prefix.txt documentation.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1630686919-19495-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Devicetree binding documentation for CS35L41 driver
CS35L41 is a 11-V Boosted Mono Class D Amplifier with
DSP Speaker Protection and Equalization
Signed-off-by: David Rhodes <drhodes@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210907225719.2018115-3-drhodes@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
vduse driver supporting blk
virtio-vsock support for end of record with SEQPACKET
vdpa: mac and mq support for ifcvf and mlx5
vdpa: management netlink for ifcvf
virtio-i2c, gpio dt bindings
misc fixes, cleanups
NB: when merging this with
b542e383d8 ("eventfd: Make signal recursion protection a task bit")
from Linus' tree, replace eventfd_signal_count with
eventfd_signal_allowed, and drop the export of eventfd_wake_count from
("eventfd: Export eventfd_wake_count to modules").
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmE1+awPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpt6EIAJy0qrc62lktNA0IiIVJSLbUbTMmFj8MzkGR
8UxZdhpjWqBPJPyaOuNeksAqTGm/UAPEYx3C2c95Jhej7anFpy7dbCtIXcPHLJME
DjcJg+EDrlNCj8m0FcsHpHWsFzPMERJpyEZNxgB5WazQbv+yWhGrg2FN5DCnF0Ro
ZFYeKSVty148pQ0nHl8X0JM2XMtqit+O+LvKN2HQZ+fubh7BCzMxzkHY0QLHIzUS
UeZqd3Qm8YcbqnlX38P5D6k+NPiTEgknmxaBLkPxg6H3XxDAmaIRFb8Ldd1rsgy1
zTLGDiSGpVDIpawRnuEAzqJThV3Y5/MVJ1WD+mDYQ96tmhfp+KY=
=DBH/
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- vduse driver ("vDPA Device in Userspace") supporting emulated virtio
block devices
- virtio-vsock support for end of record with SEQPACKET
- vdpa: mac and mq support for ifcvf and mlx5
- vdpa: management netlink for ifcvf
- virtio-i2c, gpio dt bindings
- misc fixes and cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
Documentation: Add documentation for VDUSE
vduse: Introduce VDUSE - vDPA Device in Userspace
vduse: Implement an MMU-based software IOTLB
vdpa: Support transferring virtual addressing during DMA mapping
vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
vhost-iotlb: Add an opaque pointer for vhost IOTLB
vhost-vdpa: Handle the failure of vdpa_reset()
vdpa: Add reset callback in vdpa_config_ops
vdpa: Fix some coding style issues
file: Export receive_fd() to modules
eventfd: Export eventfd_wake_count to modules
iova: Export alloc_iova_fast() and free_iova_fast()
virtio-blk: remove unneeded "likely" statements
virtio-balloon: Use virtio_find_vqs() helper
vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
vsock_test: update message bounds test for MSG_EOR
af_vsock: rename variables in receive loop
virtio/vsock: support MSG_EOR bit processing
vhost/vsock: support MSG_EOR bit processing
...
- Disable fw_devlinks on x86 DT platforms to fix OLPC
- More replacing oneOf+const with enum on a few new schemas
- Drop unnecessary type references on Xilinx SPI binding schema
-----BEGIN PGP SIGNATURE-----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=a8nQ
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Disable fw_devlinks on x86 DT platforms to fix OLPC
- More replacing oneOf+const with enum on a few new schemas
- Drop unnecessary type references on Xilinx SPI binding schema
* tag 'devicetree-fixes-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
spi: dt-bindings: xilinx: Drop type reference on *-bits properties
dt-bindings: More use 'enum' instead of 'oneOf' plus 'const' entries
of: property: Disable fw_devlink DT support for X86
Subsystem:
- Switch to Neri and Schneider time conversion algorithm
Drivers:
- rx8025: add rx8035 support
- s5m: modernize driver and set range
-----BEGIN PGP SIGNATURE-----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=480a
-----END PGP SIGNATURE-----
Merge tag 'rtc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"The broken down time conversion is similar to what is done in the time
subsystem since v5.14. The rest is fairly straightforward.
Subsystem:
- Switch to Neri and Schneider time conversion algorithm
Drivers:
- rx8025: add rx8035 support
- s5m: modernize driver and set range"
* tag 'rtc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: rx8010: select REGMAP_I2C
dt-bindings: rtc: add Epson RX-8025 and RX-8035
rtc: rx8025: implement RX-8035 support
rtc: cmos: remove stale REVISIT comments
rtc: tps65910: Correct driver module alias
rtc: move RTC_LIB_KUNIT_TEST to proper location
rtc: lib_test: add MODULE_LICENSE
rtc: Improve performance of rtc_time64_to_tm(). Add tests.
rtc: s5m: set range
rtc: s5m: enable wakeup only when available
rtc: s5m: signal the core when alarm are not available
rtc: s5m: switch to devm_rtc_allocate_device
The changes this time around are mostly janitorial in nature. A lot of
this is simplifications of drivers using device-managed functions and
improving compilation coverage.
The Mediatek display PWM driver now supports the atomic API.
Cleanups and minor fixes make up the remainder of this set.
-----BEGIN PGP SIGNATURE-----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=yTrZ
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"The changes this time around are mostly janitorial in nature. A lot of
this is simplifications of drivers using device-managed functions and
improving compilation coverage.
The Mediatek display PWM driver now supports the atomic API.
Cleanups and minor fixes make up the remainder of this set"
* tag 'pwm/for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (54 commits)
pwm: mtk-disp: Implement atomic API .get_state()
pwm: mtk-disp: Fix overflow in period and duty calculation
pwm: mtk-disp: Implement atomic API .apply()
pwm: mtk-disp: Adjust the clocks to avoid them mismatch
dt-bindings: pwm: rockchip: Add description for rk3568
pwm: Make pwmchip_remove() return void
pwm: sun4i: Don't check the return code of pwmchip_remove()
pwm: sifive: Don't check the return code of pwmchip_remove()
pwm: samsung: Don't check the return code of pwmchip_remove()
pwm: renesas-tpu: Don't check the return code of pwmchip_remove()
pwm: rcar: Don't check the return code of pwmchip_remove()
pwm: pca9685: Don't check the return code of pwmchip_remove()
pwm: omap-dmtimer: Don't check the return code of pwmchip_remove()
pwm: mtk-disp: Don't check the return code of pwmchip_remove()
pwm: imx-tpm: Don't check the return code of pwmchip_remove()
pwm: img: Don't check the return code of pwmchip_remove()
pwm: cros-ec: Don't check the return code of pwmchip_remove()
pwm: brcmstb: Don't check the return code of pwmchip_remove()
pwm: atmel-tcb: Don't check the return code of pwmchip_remove()
pwm: atmel-hlcdc: Don't check the return code of pwmchip_remove()
...
tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST
(Dmitry Osipenko)
- Fix the error code for the exynos when devm_get_clk() fails (Dan
Carpenter)
- Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar)
- Add support for hardware trip points for the rcar gen3 thermal
driver and store TSC id as unsigned int (Niklas Söderlund)
- Replace the deprecated CPU-hotplug functions get_online_cpus() and
put_online_cpus (Sebastian Andrzej Siewior)
- Add the thermal tools directory in the MAINTAINERS file (Daniel
Lezcano)
- Fix the Makefile and the cross compilation flags for the userspace
'tmon' tool (Rolf Eike Beer)
- Allow to use the IMOK independently from the GDDV on Int340x (Sumeet
Pawnikar)
- Fix the stub thermal_cooling_device_register() function prototype
which does not match the real function (Arnd Bergmann)
- Make the thermal trip point optional in the DT bindings (Maxime
Ripard)
- Fix a typo in a comment in the core code (Geert Uytterhoeven)
- Reduce the verbosity of the trace in the SoC thermal tegra driver
(Dmitry Osipenko)
- Add the support for the LMh (Limit Management hardware) driver on
the QCom platforms (Thara Gopinath)
- Allow processing of HWP interrupt by adding a weak function in the
Intel driver (Srinivas Pandruvada)
- Prevent an abort of the sensor probe is a channel is not used
(Matthias Kaehlcke)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmE7yAcACgkQqDIjiipP
6E8WKwgAmI+kdOURCz1CtCIv6FnQFx20suxZidfATPULBPZ8zcHqdjxJECXJpvDz
y8T8dGAPRqXmMBJm2vF/qVraHaDJvscHXaflhsurhyEp0tiGptNeugBosso0jDEQ
JFrQ6Rny/NCmNMOkWW4YlSfkik0zQ43xlHocy3UfOKfcshhYWGsPTbIXdA6wH/zh
3tFW8j327tkyenrKZiaioJOSX88Oyy7Ft8l5k0HP+hPYkrvihWDJuEfEEmpfkdA7
Q70Lacf2QtFP8mUfGKpQxURSgndjphDPU7tzP5NqqWvLuT94aTspvJx4ywVwK8Iv
o+jNvR33yBIs5FXXB7B1ymkNE1h8uQ==
=blIQ
-----END PGP SIGNATURE-----
Merge tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Add the tegra3 thermal sensor and fix the compilation testing on
tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST
(Dmitry Osipenko)
- Fix the error code for the exynos when devm_get_clk() fails (Dan
Carpenter)
- Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar)
- Add support for hardware trip points for the rcar gen3 thermal driver
and store TSC id as unsigned int (Niklas Söderlund)
- Replace the deprecated CPU-hotplug functions get_online_cpus() and
put_online_cpus (Sebastian Andrzej Siewior)
- Add the thermal tools directory in the MAINTAINERS file (Daniel
Lezcano)
- Fix the Makefile and the cross compilation flags for the userspace
'tmon' tool (Rolf Eike Beer)
- Allow to use the IMOK independently from the GDDV on Int340x (Sumeet
Pawnikar)
- Fix the stub thermal_cooling_device_register() function prototype
which does not match the real function (Arnd Bergmann)
- Make the thermal trip point optional in the DT bindings (Maxime
Ripard)
- Fix a typo in a comment in the core code (Geert Uytterhoeven)
- Reduce the verbosity of the trace in the SoC thermal tegra driver
(Dmitry Osipenko)
- Add the support for the LMh (Limit Management hardware) driver on the
QCom platforms (Thara Gopinath)
- Allow processing of HWP interrupt by adding a weak function in the
Intel driver (Srinivas Pandruvada)
- Prevent an abort of the sensor probe is a channel is not used
(Matthias Kaehlcke)
* tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not used
thermal/drivers/intel: Allow processing of HWP interrupt
dt-bindings: thermal: Add dt binding for QCOM LMh
thermal/drivers/qcom: Add support for LMh driver
firmware: qcom_scm: Introduce SCM calls to access LMh
thermal/drivers/tegra-soctherm: Silence message about clamped temperature
thermal: Spelling s/scallbacks/callbacks/
dt-bindings: thermal: Make trips node optional
thermal/core: Fix thermal_cooling_device_register() prototype
thermal/drivers/int340x: Use IMOK independently
tools/thermal/tmon: Add cross compiling support
thermal/tools/tmon: Improve the Makefile
MAINTAINERS: Add missing userspace thermal tools to the thermal section
thermal/drivers/intel_powerclamp: Replace deprecated CPU-hotplug functions.
thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned int
thermal/drivers/rcar_gen3_thermal: Add support for hardware trip points
drivers/thermal/intel: Add TCC cooling support for AlderLake platform
thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()
thermal/drivers/tegra: Correct compile-testing of drivers
thermal/drivers/tegra: Add driver for Tegra30 thermal sensor
Pull input updates from Dmitry Torokhov:
- several device tree bindings for input devices have been converted to
yaml
- dropped no longer used ixp4xx-beeper and CSR Prima2 PWRC drivers
- analog joystick has been converted to use ktime API and no longer
warn about low resolution timers
- a few driver fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits)
Input: analog - always use ktime functions
Input: mms114 - support MMS134S
Input: elan_i2c - reduce the resume time for controller in Whitebox
Input: edt-ft5x06 - added case for EDT EP0110M09
Input: adc-keys - drop bogus __refdata annotation
Input: Fix spelling mistake in Kconfig "useable" -> "usable"
Input: Fix spelling mistake in Kconfig "Modul" -> "Module"
Input: remove dead CSR Prima2 PWRC driver
Input: adp5589-keys - use the right header
Input: adp5588-keys - use the right header
dt-bindings: input: tsc2005: Convert to YAML schema
Input: ep93xx_keypad - prepare clock before using it
dt-bindings: input: sun4i-lradc: Add wakeup-source
dt-bindings: input: Convert Regulator Haptic binding to a schema
dt-bindings: input: Convert Pixcir Touchscreen binding to a schema
dt-bindings: input: Convert ChipOne ICN8318 binding to a schema
Input: pm8941-pwrkey - fix comma vs semicolon issue
dt-bindings: power: reset: qcom-pon: Convert qcom PON binding to yaml
dt-bindings: input: pm8941-pwrkey: Convert pm8941 power key binding to yaml
dt-bindings: power: reset: Change 'additionalProperties' to true
...
'enum' is equivalent to 'oneOf' with a list of 'const' entries, but 'enum'
is more concise and yields better error messages.
Fix a couple more cases which have appeared.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Mark Brown <broonie@kernel.org>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Aswath Govindraju <a-govindraju@ti.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: linux-spi@vger.kernel.org
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210910165153.2843871-1-robh@kernel.org
A collection of small fixes that have been gathered before rc1,
including a few regression fixes for the problem in the previous
pull request.
-----BEGIN PGP SIGNATURE-----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=eeri
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes that have been gathered before rc1,
including a few regression fixes for the problem in the previous pull
request"
* tag 'sound-fix-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: gus: Fix repeated probe for ISA interwave card
ALSA: gus: Fix repeated probes of snd_gus_create()
ALSA: vx222: fix null-ptr-deref
ASoC: rockchip: i2s: Fix concurrency between tx/rx
ASoC: mt8195: correct the dts parsing logic about DPTX and HDMITX
ASoC: Intel: boards: Fix CONFIG_SND_SOC_SDW_MOCKUP select
ASoC: dt-bindings: fsl_rpmsg: Add compatible string for i.MX8ULP
ALSA: usb-audio: Add registration quirk for JBL Quantum 800
ASoC: rt5682: fix headset background noise when S3 state
ASoC: dt-bindings: mt8195: remove dependent headers in the example
ASoC: mediatek: SND_SOC_MT8195 should depend on ARCH_MEDIATEK
ASoC: samsung: s3c24xx_simtec: fix spelling mistake "devicec" -> "device"
ASoC: audio-graph: respawn Platform Support
ASoC: mediatek: mt8195: add MTK_PMIC_WRAP dependency
New drivers/devices
- Support for Renesas RZ/G2L dma controller
- New driver for AMD PTDMA controller
Updates:
- Big pile of idxd updates
- Updates for Altera driver, stm32-dma, dw etc
Also contains, bus_remove_return_void-5.15 to resolve dependencies
-----BEGIN PGP SIGNATURE-----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=RYbR
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New drivers/devices
- Support for Renesas RZ/G2L dma controller
- New driver for AMD PTDMA controller
Updates:
- Big pile of idxd updates
- Updates for Altera driver, stm32-dma, dw etc"
* tag 'dmaengine-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (83 commits)
dmaengine: sh: fix some NULL dereferences
dmaengine: sh: Fix unused initialization of pointer lmdesc
MAINTAINERS: Fix AMD PTDMA DRIVER entry
dmaengine: ptdma: remove PT_OFFSET to avoid redefnition
dmaengine: ptdma: Add debugfs entries for PTDMA
dmaengine: ptdma: register PTDMA controller as a DMA resource
dmaengine: ptdma: Initial driver for the AMD PTDMA
dmaengine: fsl-dpaa2-qdma: Fix spelling mistake "faile" -> "failed"
dmaengine: idxd: remove interrupt disable for dev_lock
dmaengine: idxd: remove interrupt disable for cmd_lock
dmaengine: idxd: fix setting up priv mode for dwq
dmaengine: xilinx_dma: Set DMA mask for coherent APIs
dmaengine: ti: k3-psil-j721e: Add entry for CSI2RX
dmaengine: sh: Add DMAC driver for RZ/G2L SoC
dmaengine: Extend the dma_slave_width for 128 bytes
dt-bindings: dma: Document RZ/G2L bindings
dmaengine: ioat: depends on !UML
dmaengine: idxd: set descriptor allocation size to threshold for swq
dmaengine: idxd: make submit failure path consistent on desc freeing
dmaengine: idxd: remove interrupt flag for completion list spinlock
...
- Add new cpufreq driver for the MediaTek MT6779 platform called
mediatek-hw along with corresponding DT bindings (Hector.Yuan).
- Add DCVS interrupt support to the qcom-cpufreq-hw driver (Thara
Gopinath).
- Make the qcom-cpufreq-hw driver set the dvfs_possible_from_any_cpu
policy flag (Taniya Das).
- Blocklist more Qualcomm platforms in cpufreq-dt-platdev (Bjorn
Andersson).
- Make the vexpress cpufreq driver set the CPUFREQ_IS_COOLING_DEV
flag (Viresh Kumar).
- Add new cpufreq driver callback to allow drivers to register
with the Energy Model in a consistent way and make several
drivers use it (Viresh Kumar).
- Change the remaining users of the .ready() cpufreq driver callback
to move the code from it elsewhere and drop it from the cpufreq
core (Viresh Kumar).
- Revert recent intel_pstate change adding HWP guaranteed performance
change notification support to it that led to problems, because
the notification in question is triggered prematurely on some
systems (Rafael Wysocki).
- Convert the OPP DT bindings to DT schema and clean them up while
at it (Rob Herring).
-----BEGIN PGP SIGNATURE-----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=WSpr
-----END PGP SIGNATURE-----
Merge tag 'pm-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are mostly ARM cpufreq driver updates, including one new
MediaTek driver that has just passed all of the reviews, with the
addition of a revert of a recent intel_pstate commit, some core
cpufreq changes and a DT-related update of the operating performance
points (OPP) support code.
Specifics:
- Add new cpufreq driver for the MediaTek MT6779 platform called
mediatek-hw along with corresponding DT bindings (Hector.Yuan).
- Add DCVS interrupt support to the qcom-cpufreq-hw driver (Thara
Gopinath).
- Make the qcom-cpufreq-hw driver set the dvfs_possible_from_any_cpu
policy flag (Taniya Das).
- Blocklist more Qualcomm platforms in cpufreq-dt-platdev (Bjorn
Andersson).
- Make the vexpress cpufreq driver set the CPUFREQ_IS_COOLING_DEV
flag (Viresh Kumar).
- Add new cpufreq driver callback to allow drivers to register with
the Energy Model in a consistent way and make several drivers use
it (Viresh Kumar).
- Change the remaining users of the .ready() cpufreq driver callback
to move the code from it elsewhere and drop it from the cpufreq
core (Viresh Kumar).
- Revert recent intel_pstate change adding HWP guaranteed performance
change notification support to it that led to problems, because the
notification in question is triggered prematurely on some systems
(Rafael Wysocki).
- Convert the OPP DT bindings to DT schema and clean them up while at
it (Rob Herring)"
* tag 'pm-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
Revert "cpufreq: intel_pstate: Process HWP Guaranteed change notification"
cpufreq: mediatek-hw: Add support for CPUFREQ HW
cpufreq: Add of_perf_domain_get_sharing_cpumask
dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW
cpufreq: Remove ready() callback
cpufreq: sh: Remove sh_cpufreq_cpu_ready()
cpufreq: acpi: Remove acpi_cpufreq_cpu_ready()
cpufreq: qcom-hw: Set dvfs_possible_from_any_cpu cpufreq driver flag
cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev
cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support
cpufreq: scmi: Use .register_em() to register with energy model
cpufreq: vexpress: Use .register_em() to register with energy model
cpufreq: scpi: Use .register_em() to register with energy model
dt-bindings: opp: Convert to DT schema
dt-bindings: Clean-up OPP binding node names in examples
ARM: dts: omap: Drop references to opp.txt
cpufreq: qcom-cpufreq-hw: Use .register_em() to register with energy model
cpufreq: omap: Use .register_em() to register with energy model
cpufreq: mediatek: Use .register_em() to register with energy model
cpufreq: imx6q: Use .register_em() to register with energy model
...
* pm-cpufreq:
Revert "cpufreq: intel_pstate: Process HWP Guaranteed change notification"
cpufreq: mediatek-hw: Add support for CPUFREQ HW
cpufreq: Add of_perf_domain_get_sharing_cpumask
dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW
cpufreq: Remove ready() callback
cpufreq: sh: Remove sh_cpufreq_cpu_ready()
cpufreq: acpi: Remove acpi_cpufreq_cpu_ready()
cpufreq: qcom-hw: Set dvfs_possible_from_any_cpu cpufreq driver flag
cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev
cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support
cpufreq: scmi: Use .register_em() to register with energy model
cpufreq: vexpress: Use .register_em() to register with energy model
cpufreq: scpi: Use .register_em() to register with energy model
cpufreq: qcom-cpufreq-hw: Use .register_em() to register with energy model
cpufreq: omap: Use .register_em() to register with energy model
cpufreq: mediatek: Use .register_em() to register with energy model
cpufreq: imx6q: Use .register_em() to register with energy model
cpufreq: dt: Use .register_em() to register with energy model
cpufreq: Add callback to register with energy model
cpufreq: vexpress: Set CPUFREQ_IS_COOLING_DEV flag
The D1 SoC contains EMAC hardware which is compatible with the A64 EMAC.
Add the new compatible string, with the A64 as a fallback.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: David S. Miller <davem@davemloft.net>
This moves the crash recovery worker to the freezable work queue to
avoid interaction with other drivers during suspend & resume. It fixes a
couple of typos in comments.
It adds support for handling the audio DSP on SDM660 and it fixes a race
between the Qualcomm wireless subsystem driver and the associated driver
for the RF chip.
-----BEGIN PGP SIGNATURE-----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=EX0n
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
- move the crash recovery worker to the freezable work queue to avoid
interaction with other drivers during suspend & resume
- fix a couple of typos in comments
- add support for handling the audio DSP on SDM660
- fix a race between the Qualcomm wireless subsystem driver and the
associated driver for the RF chip
* tag 'rproc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
remoteproc: q6v5_pas: Add sdm660 ADSP PIL compatible
dt-bindings: remoteproc: qcom: adsp: Add SDM660 ADSP
remoteproc: use freezable workqueue for crash notifications
remoteproc: fix kernel doc for struct rproc_ops
remoteproc: fix an typo in fw_elf_get_class code comments
remoteproc: qcom: wcnss: Fix race with iris probe
- Add support for registering devices via MFD cells to Simple MFD (I2C)
- New Drivers
- Add support for Renesas Synchronization Management Unit (SMU)
- New Device Support
- Add support for N5010 to Intel M10 BMC
- Add support for Cannon Lake to Intel LPSS ACPI
- Add support for Samsung SSG{1,2} to ST-Ericsson's U8500 family
- Add support for TQMx110EB and TQMxE40x to TQ-Systems PLD TQMx86
- New Functionality
- Add support for GPIO to Intel LPC ICH
- Add support for Reset to Texas Instruments TPS65086
- Fix-ups
- Trivial, sorting, whitespace, renaming, etc; mt6360-core, db8500-prcmu-regs, tqmx86
- Device Tree fiddling; syscon, axp20x, qcom,pm8008, ti,tps65086, brcm,cru
- Use proper APIs for IRQ map resolution; ab8500-core, stmpe, tc3589x, wm8994-irq
- Pass 'supplied-from' property through axp288_fuel_gauge via swnode
- Remove unused file entry; MAINTAINERS
- Make interrupt line optional; tps65086
- Rename db8500-cpuidle driver symbol; db8500-prcmu
- Remove support for unused hardware; tqmx86
- Provide a standard LPC clock frequency for unknown boards; tqmx86
- Remove unused code; ti_am335x_tscadc
- Use of_iomap() instead of ioremap(); syscon
- Bug Fixes
- Clear GPIO IRQ resource flags when no IRQ is set; tqmx86
- Fix incorrect/misleading frequencies; db8500-prcmu
- Mitigate namespace clash with other GPIOBASE users
-----BEGIN PGP SIGNATURE-----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=7Zv8
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Add support for registering devices via MFD cells to Simple MFD (I2C)
New Drivers:
- Add support for Renesas Synchronization Management Unit (SMU)
New Device Support:
- Add support for N5010 to Intel M10 BMC
- Add support for Cannon Lake to Intel LPSS ACPI
- Add support for Samsung SSG{1,2} to ST-Ericsson's U8500 family
- Add support for TQMx110EB and TQMxE40x to TQ-Systems PLD TQMx86
New Functionality:
- Add support for GPIO to Intel LPC ICH
- Add support for Reset to Texas Instruments TPS65086
Fix-ups:
- Trivial, sorting, whitespace, renaming, etc; mt6360-core, db8500-prcmu-regs, tqmx86
- Device Tree fiddling; syscon, axp20x, qcom,pm8008, ti,tps65086, brcm,cru
- Use proper APIs for IRQ map resolution; ab8500-core, stmpe, tc3589x, wm8994-irq
- Pass 'supplied-from' property through axp288_fuel_gauge via swnode
- Remove unused file entry; MAINTAINERS
- Make interrupt line optional; tps65086
- Rename db8500-cpuidle driver symbol; db8500-prcmu
- Remove support for unused hardware; tqmx86
- Provide a standard LPC clock frequency for unknown boards; tqmx86
- Remove unused code; ti_am335x_tscadc
- Use of_iomap() instead of ioremap(); syscon
Bug Fixes:
- Clear GPIO IRQ resource flags when no IRQ is set; tqmx86
- Fix incorrect/misleading frequencies; db8500-prcmu
- Mitigate namespace clash with other GPIOBASE users"
* tag 'mfd-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (31 commits)
mfd: lpc_sch: Rename GPIOBASE to prevent build error
mfd: syscon: Use of_iomap() instead of ioremap()
dt-bindings: mfd: Add Broadcom CRU
mfd: ti_am335x_tscadc: Delete superfluous error message
mfd: tqmx86: Assume 24MHz LPC clock for unknown boards
mfd: tqmx86: Add support for TQ-Systems DMI IDs
mfd: tqmx86: Add support for TQMx110EB and TQMxE40x
mfd: tqmx86: Fix typo in "platform"
mfd: tqmx86: Remove incorrect TQMx90UC board ID
mfd: tqmx86: Clear GPIO IRQ resource when no IRQ is set
mfd: simple-mfd-i2c: Add support for registering devices via MFD cells
mfd/cpuidle: ux500: Rename driver symbol
mfd: tps65086: Add cell entry for reset driver
mfd: tps65086: Make interrupt line optional
dt-bindings: mfd: Convert tps65086.txt to YAML
MAINTAINERS: Adjust ARM/NOMADIK/Ux500 ARCHITECTURES to file renaming
mfd: db8500-prcmu: Handle missing FW variant
mfd: db8500-prcmu: Rename register header
mfd: axp20x: Add supplied-from property to axp288_fuel_gauge cell
mfd: Don't use irq_create_mapping() to resolve a mapping
...
Pull more ARM cpufreq changes for v5.15-rc1 from Viresh Kumar:
"This adds a new cpufreq driver for Mediatek, which had been going
through reviews since last one year."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: mediatek-hw: Add support for CPUFREQ HW
cpufreq: Add of_perf_domain_get_sharing_cpumask
dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW
CRU is a block used in e.g. Northstar devices. It can be seen in the
bcm5301x.dtsi and this binding documents its proper usage.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This patch adds binding for virtio I2C device, it is based on
virtio-device bindings.
Acked-by: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/33c317b95097ce491845c697db1e8285e3ec1d41.1627362340.git.viresh.kumar@linaro.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Allow virtio device sub-nodes to be added to the virtio mmio or pci
nodes. The compatible property for virtio device must be of the format
"virtio,device<ID>", where ID is virtio device ID in hexadecimal format.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/d8319fd18df7086b12cdcc23193c313893aa071a.1627362340.git.viresh.kumar@linaro.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Rob Herring <robh@kernel.org>
* Support for PC-relative instructions (auipc and branches) in kprobes.
* Support for forced IRQ threading.
* Support for the hlt/nohlt kernel command line options, via the generic
idle loop.
* Support for showing the edge/level triggered behavior of interrupts in
/proc/interrupts.
* A handful of cleanups to our address mapping mechanisms.
* Support for allocating gigantic hugepages via CMA.
* Support for the undefined behavior sanitizer.
* A handful of cleanups to the VDSO that allow the kernel to build with
LLD.
* Support for hugepage migration.
-----BEGIN PGP SIGNATURE-----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=rDB3
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.15-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- support PC-relative instructions (auipc and branches) in kprobes
- support for forced IRQ threading
- support for the hlt/nohlt kernel command line options, via the
generic idle loop
- show the edge/level triggered behavior of interrupts
in /proc/interrupts
- a handful of cleanups to our address mapping mechanisms
- support for allocating gigantic hugepages via CMA
- support for the undefined behavior sanitizer (UBSAN)
- a handful of cleanups to the VDSO that allow the kernel to build with
LLD.
- support for hugepage migration
* tag 'riscv-for-linus-5.15-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits)
riscv: add support for hugepage migration
RISC-V: Fix VDSO build for !MMU
riscv: use strscpy to replace strlcpy
riscv: explicitly use symbol offsets for VDSO
riscv: Enable Undefined Behavior Sanitizer UBSAN
riscv: Keep the riscv Kconfig selects sorted
riscv: Support allocating gigantic hugepages using CMA
riscv: fix the global name pfn_base confliction error
riscv: Move early fdt mapping creation in its own function
riscv: Simplify BUILTIN_DTB device tree mapping handling
riscv: Use __maybe_unused instead of #ifdefs around variable declarations
riscv: Get rid of map_size parameter to create_kernel_page_table
riscv: Introduce va_kernel_pa_offset for 32-bit kernel
riscv: Optimize kernel virtual address conversion macro
dt-bindings: riscv: add starfive jh7100 bindings
riscv: Enable GENERIC_IRQ_SHOW_LEVEL
riscv: Enable idle generic idle loop
riscv: Allow forced irq threading
riscv: Implement thread_struct whitelist for hardened usercopy
riscv: kprobes: implement the branch instructions
...
* blkdevs:
- Simplify the refcounting in blktrans_{open, release}
- Simplify blktrans_getgeo
- Remove blktrans_ref_mutex
- Simplify blktrans_dev_get
- Use lockdep_assert_held
- Don't hold del_mtd_blktrans_dev in blktrans_{open, release}
* ftl:
- Don't cast away the type when calling add_mtd_blktrans_dev
- Don't cast away the type when calling add_mtd_blktrans_dev
- Use container_of() rather than cast
- Fix use-after-free
- Add discard support
- Allow use of MTD_RAM for testing purposes
* concat:
- Check _read, _write callbacks existence before assignment
- Judge callback existence based on the master
* maps:
- Maps: remove dead MTD map driver for PMC-Sierra MSP boards
* mtdblock:
- Warn if added for a NAND device
- Add comment about UBI block devices
- Update old JFFS2 mention in Kconfig
* partitions:
- Redboot: convert to YAML
NAND core changes:
* Repair Miquel Raynal's email address in MAINTAINERS
* Fix a couple of spelling mistakes in Kconfig
* bbt: Skip bad blocks when searching for the BBT in NAND
* Remove never changed ret variable
Raw NAND changes:
* cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()'
* intel: Fix error handling in probe
* omap: Fix kernel doc warning on 'calcuate' typo
* gpmc: Fix the ECC bytes vs. OOB bytes equation
SPI-NAND core changes:
* Properly fill the OOB area.
* Fix comment
SPI-NAND drivers changes:
* macronix: Add Quad support for serial NAND flash
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmExS1gACgkQJWrqGEe9
VoSZcAf/SsUDpp/lqc+no4R+eUR/CWrbr3AKu2JjjgCJt0HK++Fy8LQU3FEjn9E8
CNBWYqIVVit1XhqGu192wh0ESsHGlNwjicB3Ul4/RFFC4WKs68kQe0gQrU6z/95V
jaTOW+B7PZh6MFbQROUVI97Cs3OTd8vCE3L2SgIW6krk8tnOEyddlgFsWLISjk6g
Ut1I473653fJAcr5OXEFJLWF+01q2azR9AiAkfKC47IUekTRJqjK2YJpAhsdf4hi
xqazp79sbcNXSHCgOOQv4/f03+SAiufRcNgztwrSWw2fdCg0csBC9ACwmdhhGGfd
7uFn+/Q3sVDOKTN7aAWW1KnykKXsJw==
=JFrk
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD changes:
- blkdevs:
- Simplify the refcounting in blktrans_{open, release}
- Simplify blktrans_getgeo
- Remove blktrans_ref_mutex
- Simplify blktrans_dev_get
- Use lockdep_assert_held
- Don't hold del_mtd_blktrans_dev in blktrans_{open, release}
- ftl:
- Don't cast away the type when calling add_mtd_blktrans_dev
- Don't cast away the type when calling add_mtd_blktrans_dev
- Use container_of() rather than cast
- Fix use-after-free
- Add discard support
- Allow use of MTD_RAM for testing purposes
- concat:
- Check _read, _write callbacks existence before assignment
- Judge callback existence based on the master
- maps:
- Maps: remove dead MTD map driver for PMC-Sierra MSP boards
- mtdblock:
- Warn if added for a NAND device
- Add comment about UBI block devices
- Update old JFFS2 mention in Kconfig
- partitions:
- Redboot: convert to YAML
NAND core changes:
- Repair Miquel Raynal's email address in MAINTAINERS
- Fix a couple of spelling mistakes in Kconfig
- bbt: Skip bad blocks when searching for the BBT in NAND
- Remove never changed ret variable
Raw NAND changes:
- cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()'
- intel: Fix error handling in probe
- omap: Fix kernel doc warning on 'calcuate' typo
- gpmc: Fix the ECC bytes vs. OOB bytes equation
SPI-NAND core changes:
- Properly fill the OOB area.
- Fix comment
SPI-NAND drivers changes:
- macronix: Add Quad support for serial NAND flash"
* tag 'mtd/for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (30 commits)
mtd: rawnand: cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()'
mtd_blkdevs: simplify the refcounting in blktrans_{open, release}
mtd_blkdevs: simplify blktrans_getgeo
mtd_blkdevs: remove blktrans_ref_mutex
mtd_blkdevs: simplify blktrans_dev_get
mtd/rfd_ftl: don't cast away the type when calling add_mtd_blktrans_dev
mtd/ftl: don't cast away the type when calling add_mtd_blktrans_dev
mtd_blkdevs: use lockdep_assert_held
mtd_blkdevs: don't hold del_mtd_blktrans_dev in blktrans_{open, release}
mtd: rawnand: intel: Fix error handling in probe
mtd: mtdconcat: Check _read, _write callbacks existence before assignment
mtd: mtdconcat: Judge callback existence based on the master
mtd: maps: remove dead MTD map driver for PMC-Sierra MSP boards
mtd: rfd_ftl: use container_of() rather than cast
mtd: rfd_ftl: fix use-after-free
mtd: rfd_ftl: add discard support
mtd: rfd_ftl: allow use of MTD_RAM for testing purposes
mtdblock: Warn if added for a NAND device
mtd: spinand: macronix: Add Quad support for serial NAND flash
mtdblock: Add comment about UBI block devices
...
Including:
- New DART IOMMU driver for Apple Silicon M1 chips.
- Optimizations for iommu_[map/unmap] performance
- Selective TLB flush support for the AMD IOMMU driver to make
it more efficient on emulated IOMMUs.
- Rework IOVA setup and default domain type setting to move more
code out of IOMMU drivers and to support runtime switching
between certain types of default domains.
- VT-d Updates from Lu Baolu:
- Update the virtual command related registers
- Enable Intel IOMMU scalable mode by default
- Preset A/D bits for user space DMA usage
- Allow devices to have more than 32 outstanding PRs
- Various cleanups
- ARM SMMU Updates from Will Deacon:
- SMMUv3: Minor optimisation to avoid zeroing struct members on CMD submission
- SMMUv3: Increased use of batched commands to reduce submission latency
- SMMUv3: Refactoring in preparation for ECMDQ support
- SMMUv2: Fix races when probing devices with identical StreamIDs
- SMMUv2: Optimise walk cache flushing for Qualcomm implementations
- SMMUv2: Allow deep sleep states for some Qualcomm SoCs with shared clocks
- Various smaller optimizations, cleanups, and fixes
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmEyKYAACgkQK/BELZcB
GuOzAxAAnJ02PG07BnFFFGN2/o3eVON4LQUXquMePjcZ8A8oQf073jO/ybWNnpJK
5V+DHRg2CAugFHks/EwIrxFXAWZuStrcnk81d8t6T6ROQl47Zv1qshksUTnsDQnz
V7mQ1P/pcsBwCUf73aD9ncLmLkiuTVfHKoKfe3gHeQI+H+2Lw4ijzB8kIwUqhkHI
heJZLDmO87S2Mr7zlCmMQH5R550fHrTKSbUCx9QqFu3GgWsjkU+3u1S17xR1bEoW
hmhJhyAw+MLrSgdeG4U9o+6AcQuRELEHfVSq7PtDxQ6hEVziGYGY4Nk+YiEcXFiv
mu9qfEkaP/2QOKszvks+nhHrwDnJ9WLnEEskiEFwjsaFauIKsRscfYVUBTWeYXJT
9t/PVngigWLDhGO0NEPthQvJExvJJs1MQQ72CcA6dd0XdGpN+aRglIUWUJP/nQHd
doAx4/1YWnHVkWWUef8NgmVvlHdoXjA7vy4QGL9FYCqV6ImfhAkJYKJ99X6Ovlmk
gje/Kx+5wUPT2nXNbTkjalIylyUNpugMY4xD7K06VXjvRMUf2SbYNDQxYJaDDld6
nDt0F0NvEyrj7HO8egwIZbX3MOikhMGHur48yEyCTbm+9oHQffkODq1o4OfuxJh2
nq0G5Plln9CEmhQVwzibcPSNlYPe8AZbbXqQ9DrJFusEpYj+01c=
=zVaQ
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- New DART IOMMU driver for Apple Silicon M1 chips
- Optimizations for iommu_[map/unmap] performance
- Selective TLB flush support for the AMD IOMMU driver to make it more
efficient on emulated IOMMUs
- Rework IOVA setup and default domain type setting to move more code
out of IOMMU drivers and to support runtime switching between certain
types of default domains
- VT-d Updates from Lu Baolu:
- Update the virtual command related registers
- Enable Intel IOMMU scalable mode by default
- Preset A/D bits for user space DMA usage
- Allow devices to have more than 32 outstanding PRs
- Various cleanups
- ARM SMMU Updates from Will Deacon:
SMMUv3:
- Minor optimisation to avoid zeroing struct members on CMD submission
- Increased use of batched commands to reduce submission latency
- Refactoring in preparation for ECMDQ support
SMMUv2:
- Fix races when probing devices with identical StreamIDs
- Optimise walk cache flushing for Qualcomm implementations
- Allow deep sleep states for some Qualcomm SoCs with shared clocks
- Various smaller optimizations, cleanups, and fixes
* tag 'iommu-updates-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (85 commits)
iommu/io-pgtable: Abstract iommu_iotlb_gather access
iommu/arm-smmu: Fix missing unlock on error in arm_smmu_device_group()
iommu/vt-d: Add present bit check in pasid entry setup helpers
iommu/vt-d: Use pasid_pte_is_present() helper function
iommu/vt-d: Drop the kernel doc annotation
iommu/vt-d: Allow devices to have more than 32 outstanding PRs
iommu/vt-d: Preset A/D bits for user space DMA usage
iommu/vt-d: Enable Intel IOMMU scalable mode by default
iommu/vt-d: Refactor Kconfig a bit
iommu/vt-d: Remove unnecessary oom message
iommu/vt-d: Update the virtual command related registers
iommu: Allow enabling non-strict mode dynamically
iommu: Merge strictness and domain type configs
iommu: Only log strictness for DMA domains
iommu: Expose DMA domain strictness via sysfs
iommu: Express DMA strictness via the domain type
iommu/vt-d: Prepare for multiple DMA domain types
iommu/arm-smmu: Prepare for multiple DMA domain types
iommu/amd: Prepare for multiple DMA domain types
iommu: Introduce explicit type for non-strict DMA domains
...
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"A new feature called restricted DMA pools. It allows SWIOTLB to
utilize per-device (or per-platform) allocated memory pools instead of
using the global one.
The first big user of this is ARM Confidential Computing where the
memory for DMA operations can be set per platform"
* 'stable/for-linus-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: (23 commits)
swiotlb: use depends on for DMA_RESTRICTED_POOL
of: restricted dma: Don't fail device probe on rmem init failure
of: Move of_dma_set_restricted_buffer() into device.c
powerpc/svm: Don't issue ultracalls if !mem_encrypt_active()
s390/pv: fix the forcing of the swiotlb
swiotlb: Free tbl memory in swiotlb_exit()
swiotlb: Emit diagnostic in swiotlb_exit()
swiotlb: Convert io_default_tlb_mem to static allocation
of: Return success from of_dma_set_restricted_buffer() when !OF_ADDRESS
swiotlb: add overflow checks to swiotlb_bounce
swiotlb: fix implicit debugfs declarations
of: Add plumbing for restricted DMA pool
dt-bindings: of: Add restricted DMA pool
swiotlb: Add restricted DMA pool initialization
swiotlb: Add restricted DMA alloc/free support
swiotlb: Refactor swiotlb_tbl_unmap_single
swiotlb: Move alloc_size to swiotlb_find_slots
swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
swiotlb: Update is_swiotlb_active to add a struct device argument
swiotlb: Update is_swiotlb_buffer to add a struct device argument
...
* Repair Miquel Raynal's email address in MAINTAINERS
* Fix a couple of spelling mistakes in Kconfig
* bbt: Skip bad blocks when searching for the BBT in NAND
* Remove never changed ret variable
Raw NAND changes:
* cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()'
* intel: Fix error handling in probe
* omap: Fix kernel doc warning on 'calcuate' typo
* gpmc: Fix the ECC bytes vs. OOB bytes equation
SPI-NAND core changes:
* Properly fill the OOB area.
* Fix comment
SPI-NAND drivers changes:
* macronix: Add Quad support for serial NAND flash
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmExSXUACgkQJWrqGEe9
VoT/9wf7BJ60D3eKfnIPAnZsMgEiaLzlYfaA/z+YCX+O08mHvtApm9RLIievhZ01
+30le9U275AFDGZS5DgmY4Gtbkh5OI5YbgVqFqc4Ev3IJ2pNb7ZdPAjO/Hc5ng8O
9sTPhLr/ZknpmJu6aclCc9+C/lvAZHBQg6nYhstrljRihYJMxNmE+n3/5hveYNCX
fhZIz5uGhMzPwZSJoBMedumJ/kb/VSgznBltc+UubRr/s2ZJ7vAzjG6vptKV7Yrj
/65NyZnKiXOwVdD5TNqnsOKYA3TBN6QPG5Fz/wR/0A2R/c/qQhTTnztU5tLkSTCK
sRiaeUlyxaJcNwer7T+pvgZzyXXAhw==
=iJ+f
-----END PGP SIGNATURE-----
Merge tag 'nand/for-5.15' into mtd/next
NAND core changes:
* Repair Miquel Raynal's email address in MAINTAINERS
* Fix a couple of spelling mistakes in Kconfig
* bbt: Skip bad blocks when searching for the BBT in NAND
* Remove never changed ret variable
Raw NAND changes:
* cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()'
* intel: Fix error handling in probe
* omap: Fix kernel doc warning on 'calcuate' typo
* gpmc: Fix the ECC bytes vs. OOB bytes equation
SPI-NAND core changes:
* Properly fill the OOB area.
* Fix comment
SPI-NAND drivers changes:
* macronix: Add Quad support for serial NAND flash
no core changes at all this time, just driver work!
New drivers:
- New subdriver for Intel Keem Bay (an ARM-based SoC)
- New subdriver for Qualcomm MDM9607 and SM6115
- New subdriver for ST Microelectronics STM32MP135
- New subdriver for Freescale i.MX8ULP ("Ultra Low Power")
- New subdriver for Ingenic X2100
- Support for Qualcomm PMC8180, PMC8180C, SA8155p-adp PMIC GPIO
- Support Samsung Exynos850
- Support Renesas RZ/G2L
Enhancements:
- A major refactoring of the Rockchip driver, breaking part of it out
to a separate GPIO driver in drivers/gpio
- Pin bias support on Renesas r8a77995
- Add SCI pins support to Ingenic JZ4755 and JZ4760
- Mediatek device tree bindings converted to YAML
-----BEGIN PGP SIGNATURE-----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=I6N/
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.15 kernel cycle, no
core changes at all this time, just driver work!
New drivers:
- New subdriver for Intel Keem Bay (an ARM-based SoC)
- New subdriver for Qualcomm MDM9607 and SM6115
- New subdriver for ST Microelectronics STM32MP135
- New subdriver for Freescale i.MX8ULP ("Ultra Low Power")
- New subdriver for Ingenic X2100
- Support for Qualcomm PMC8180, PMC8180C, SA8155p-adp PMIC GPIO
- Support Samsung Exynos850
- Support Renesas RZ/G2L
Enhancements:
- A major refactoring of the Rockchip driver, breaking part of it out
to a separate GPIO driver in drivers/gpio
- Pin bias support on Renesas r8a77995
- Add SCI pins support to Ingenic JZ4755 and JZ4760
- Mediatek device tree bindings converted to YAML"
* tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (53 commits)
pinctrl: renesas: Add RZ/G2L pin and gpio controller driver
pinctrl: samsung: Add Exynos850 SoC specific data
dt-bindings: pinctrl: samsung: Add Exynos850 doc
MAINTAINERS: Add maintainers for amd-pinctrl driver
pinctrl: Add Intel Keem Bay pinctrl driver
dt-bindings: pinctrl: Add bindings for Intel Keembay pinctrl driver
pinctrl: zynqmp: Drop pinctrl_unregister for devm_ registered device
dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property
dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML
dt-bindings: pinctrl: mt8195: Use real world values for drive-strength arguments
dt-bindings: mediatek: convert pinctrl to yaml
arm: dts: mt8183: Move pinfunc to include/dt-bindings/pinctrl
arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl
pinctrl: ingenic: Add .max_register in regmap_config
pinctrl: ingenic: Fix bias config for X2000(E)
pinctrl: ingenic: Fix incorrect pull up/down info
pinctrl: Ingenic: Add pinctrl driver for X2100.
dt-bindings: pinctrl: Add bindings for Ingenic X2100.
pinctrl: Ingenic: Add SSI pins support for JZ4755 and JZ4760.
pinctrl: Ingenic: Improve the code.
...
some updates to the basic clk types to use determine_rate for the
divider type and add a power of two fractional divider flag though.
Otherwise, this is a collection of clk driver updates. More than half
the diffstat is in the Qualcomm clk driver where we add a bunch of data
to describe clks on various SoCs and fix bugs. The other big new thing
in here is the Mediatek MT8192 clk driver. That's been under review for
a while and it's nice to see that it's finally upstream.
Beyond that it's the usual set of minor fixes and tweaks to clk drivers.
There are some non-clk driver bits in here which have all been acked by
the respective maintainers.
New Drivers:
- Support video, gpu, display clks on qcom sc7280 SoCs
- GCC clks on qcom MSM8953, SM4250/6115, and SM6350 SoCs
- Multimedia clks (MMCC) on qcom MSM8994/MSM8992
- RPMh clks on qcom SM6350 SoCs
- Support for Mediatek MT8192 SoCs
- Add display (DU and DSI) clocks on Renesas R-Car V3U
- Add I2C, DMAC, USB, sound (SSIF-2), GPIO, CANFD, and ADC clocks and
resets on Renesas RZ/G2L
Updates:
- Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators
- Add power of two flag to fractional divider clk type
- Migrate some clk drivers to clk_divider_ops.determine_rate
- Migrate to clk_parent_data in gcc-sdm660
- Fix CLKOUT clocks on i.MX8MM and i.MX8MN by using imx_clk_hw_mux2
- Switch from .round_rate to .determine_rate in clk-divider-gate
- Fix clock tree update for TF-A controlled clocks for all i.MX8M
- Add missing M7 core clock for i.MX8MN
- YAML conversion of rk3399 clock controller binding
- Removal of GRF dependency for the rk3328/rk3036 pll types
- Drop CLK_IS_CRITICAL flag from Tegra fuse clk
- Make CLK_R9A06G032 Kconfig symbol invisible
- Convert various DT bindings to YAML
-----BEGIN PGP SIGNATURE-----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=Rrqg
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Nothing changed in the clk framework core this time around. We did get
some updates to the basic clk types to use determine_rate for the
divider type and add a power of two fractional divider flag though.
Otherwise, this is a collection of clk driver updates. More than half
the diffstat is in the Qualcomm clk driver where we add a bunch of
data to describe clks on various SoCs and fix bugs. The other big new
thing in here is the Mediatek MT8192 clk driver. That's been under
review for a while and it's nice to see that it's finally upstream.
Beyond that it's the usual set of minor fixes and tweaks to clk
drivers. There are some non-clk driver bits in here which have all
been acked by the respective maintainers.
New Drivers:
- Support video, gpu, display clks on qcom sc7280 SoCs
- GCC clks on qcom MSM8953, SM4250/6115, and SM6350 SoCs
- Multimedia clks (MMCC) on qcom MSM8994/MSM8992
- RPMh clks on qcom SM6350 SoCs
- Support for Mediatek MT8192 SoCs
- Add display (DU and DSI) clocks on Renesas R-Car V3U
- Add I2C, DMAC, USB, sound (SSIF-2), GPIO, CANFD, and ADC clocks and
resets on Renesas RZ/G2L
Updates:
- Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators
- Add power of two flag to fractional divider clk type
- Migrate some clk drivers to clk_divider_ops.determine_rate
- Migrate to clk_parent_data in gcc-sdm660
- Fix CLKOUT clocks on i.MX8MM and i.MX8MN by using imx_clk_hw_mux2
- Switch from .round_rate to .determine_rate in clk-divider-gate
- Fix clock tree update for TF-A controlled clocks for all i.MX8M
- Add missing M7 core clock for i.MX8MN
- YAML conversion of rk3399 clock controller binding
- Removal of GRF dependency for the rk3328/rk3036 pll types
- Drop CLK_IS_CRITICAL flag from Tegra fuse clk
- Make CLK_R9A06G032 Kconfig symbol invisible
- Convert various DT bindings to YAML"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (128 commits)
dt-bindings: clock: samsung: fix header path in example
clk: tegra: fix old-style declaration
clk: qcom: Add SM6350 GCC driver
MAINTAINERS: clock: include S3C and S5P in Samsung SoC clock entry
dt-bindings: clock: samsung: convert S5Pv210 AudSS to dtschema
dt-bindings: clock: samsung: convert Exynos AudSS to dtschema
dt-bindings: clock: samsung: convert Exynos4 to dtschema
dt-bindings: clock: samsung: convert Exynos3250 to dtschema
dt-bindings: clock: samsung: convert Exynos542x to dtschema
dt-bindings: clock: samsung: add bindings for Exynos external clock
dt-bindings: clock: samsung: convert Exynos5250 to dtschema
clk: vc5: Add properties for configuring SD/OE behavior
clk: vc5: Use dev_err_probe
dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin
dt-bindings: clock: brcm,iproc-clocks: fix armpll properties
clk: zynqmp: Fix kernel-doc format
clk: at91: clk-generated: Limit the requested rate to our range
clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gates
clk: zynqmp: Fix a memory leak
clk: zynqmp: Check the return type
...
- Add max-virtual-functions to endpoint binding (Kishon Vijay Abraham I)
- Add pci_epf_add_vepf() API to add virtual function to endpoint (Kishon
Vijay Abraham I)
- Add pci_epf_vepf_link() to link virtual function to endpoint physical
function (Kishon Vijay Abraham I)
- Add virtual function number to pci_epc_ops endpoint ops interfaces
(Kishon Vijay Abraham I)
- Simplify register base address computation for endpoint BAR configuration
(Kishon Vijay Abraham I)
- Add support to configure virtual functions in cadence endpoint driver
(Kishon Vijay Abraham I)
- Add SR-IOV configuration to endpoint test driver (Kishon Vijay Abraham I)
- Document configfs usage to create virtual functions for endpoints (Kishon
Vijay Abraham I)
* remotes/lorenzo/pci/endpoint:
Documentation: PCI: endpoint/pci-endpoint-cfs: Guide to use SR-IOV
misc: pci_endpoint_test: Populate sriov_configure ops to configure SR-IOV device
PCI: cadence: Add support to configure virtual functions
PCI: cadence: Simplify code to get register base address for configuring BAR
PCI: endpoint: Add virtual function number in pci_epc ops
PCI: endpoint: Add support to link a physical function to a virtual function
PCI: endpoint: Add support to add virtual function in endpoint core
dt-bindings: PCI: pci-ep: Add binding to specify virtual function
- Split DT bindings for PCIe controllers with independent MSI domains into
separate nodes for MT2712/MT7622 (Chuanjia Liu)
- Locate shared registers from "mediatek,generic-pciecfg" property
(Chuanjia Liu)
- Get IRQ from "pcie_irq" if "interrupt-names" property is present to fix
an MSI issue (Chuanjia Liu)
- Get PCI domain from "linux,pci-domain" property if present (Chuanjia Liu)
* remotes/lorenzo/pci/mediatek:
PCI: mediatek: Use PCI domain to handle ports detection
PCI: mediatek: Add new method to get irq number
PCI: mediatek: Add new method to get shared pcie-cfg base address
dt-bindings: PCI: mediatek: Update the Device tree bindings
As usual, the bulk of work in the SoC tree goes into DT files,
this time with a roughly even split between 32-bit and 64-bit
SoCs rather than the usual mostly 64-bit changes.
New SoCs:
- Microchip SAMA7 SoC family based on Cortex-A7, a new
32-bit platform based on the older SAMA5 series.
- Qualcomm Snapdragon SDM636 and SM8150, variations of the
existing phone SoCs.
- Renesas R-Car H3e-2G and M3e-2G SoCs, variations of
older Renesas SoCs.
New boards:
- Marvell CN913x reference boards
- ASpeed AST2600 BMC implementations for Facebook Cloudripper,
Elbert and Fuji server boards.
- Snapdragon 665 based Sony Xperia 10II
- Snapdragon MSM8916 based Xiaomi Redmi 2
- Snapdragon MSM8226 based Samsung Galaxy S3 Neo
- NXP i.MX based 32-bit boards:
- DHCOM based PicoITX
- DHSOM based DRC0ỉ
- SolidRun SolidSense
- SKOV i.MX6 boards.
- NXP i.MX based 64-bit boards:
- Nitrogen8 SoM and MNT Reform2
- LS1088A based Traverse Ten64
- i.MX8M based GW7902.
- NVIDIA Jetson TX2 NX Developer Kit
- 4KOpen STiH418-b2264 development board
- ux500 based Samsung phones: Gavini, Codina and Kyle
- TI AM335x based Sancloud BBE Lite
- ixp4xx dts files to replace all old board files
Other changes:
- Treewide fixes for dtc warnings
- Rockchips i/o domain support
- TI OMAP/AM3 CPSW switch driver support
- Improved device support for allwinner, aspeed, qualcomm, NXP,
nvidia, Renesas, Samsung, Amlogic, Mediatek, ixp4xx, stm32, sti,
OMAP and actions.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iD8DBQBhL13Z5t5GS2LDRf4RAljwAJ0acTxOBYP8J5zETlAQRWYcYWh5hACfZOgC
Om6K0IN5+lJuaUyF/GdmqS4=
=zXua
-----END PGP SIGNATURE-----
Merge tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC DT updates from Arnd Bergmann:
"As usual, the bulk of work in the SoC tree goes into DT files, this
time with a roughly even split between 32-bit and 64-bit SoCs rather
than the usual mostly 64-bit changes.
New SoCs:
- Microchip SAMA7 SoC family based on Cortex-A7, a new 32-bit
platform based on the older SAMA5 series.
- Qualcomm Snapdragon SDM636 and SM8150, variations of the existing
phone SoCs.
- Renesas R-Car H3e-2G and M3e-2G SoCs, variations of older Renesas
SoCs.
New boards:
- Marvell CN913x reference boards
- ASpeed AST2600 BMC implementations for Facebook Cloudripper, Elbert
and Fuji server boards.
- Snapdragon 665 based Sony Xperia 10II
- Snapdragon MSM8916 based Xiaomi Redmi 2
- Snapdragon MSM8226 based Samsung Galaxy S3 Neo
- NXP i.MX based 32-bit boards:
- DHCOM based PicoITX
- DHSOM based DRC0ỉ
- SolidRun SolidSense
- SKOV i.MX6 boards.
- NXP i.MX based 64-bit boards:
- Nitrogen8 SoM and MNT Reform2
- LS1088A based Traverse Ten64
- i.MX8M based GW7902.
- NVIDIA Jetson TX2 NX Developer Kit
- 4KOpen STiH418-b2264 development board
- ux500 based Samsung phones: Gavini, Codina and Kyle
- TI AM335x based Sancloud BBE Lite
- ixp4xx dts files to replace all old board files
Other changes:
- Treewide fixes for dtc warnings
- Rockchips i/o domain support
- TI OMAP/AM3 CPSW switch driver support
- Improved device support for allwinner, aspeed, qualcomm, NXP,
nvidia, Renesas, Samsung, Amlogic, Mediatek, ixp4xx, stm32, sti,
OMAP and actions"
* tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (412 commits)
arm/arm64: dts: Fix remaining dtc 'unit_address_format' warnings
ARM: dts: rockchip: Add SFC to RV1108
arm64: dts: marvell: armada-37xx: Extend PCIe MEM space
ARM: dts: aspeed: p10bmc: Add power control pins
ARM: dts: aspeed: cloudripper: Add comments for "mdio1"
ARM: dts: aspeed: minipack: Update flash partition table
dt-bindings: arm: fsl: Add Traverse Ten64 (LS1088A) board
dt-bindings: vendor-prefixes: add Traverse Technologies
arm64: dts: add device tree for Traverse Ten64 (LS1088A)
arm64: dts: ls1088a: add missing PMU node
arm64: dts: ls1088a: add internal PCS for DPMAC1 node
ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz
ARM: dts: vf610-zii-dev-rev-b: Remove #address-cells and #size-cells property from at93c46d dt node
ARM: dts: add SKOV imx6q and imx6dl based boards
dt-bindings: arm: fsl: add SKOV imx6q and imx6dl based boards
dt-bindings: vendor-prefixes: Add an entry for SKOV A/S
arm64: dts: imx8mq-reform2: add sound support
arm64: dts: imx8m: drop interrupt-affinity for pmu
arm64: dts: imx8qxp: update pmu compatible
arm64: dts: imx8mm: update pmu compatible
...
- Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators
* clk-nvidia:
clk: tegra: fix old-style declaration
clk: tegra: Remove CLK_IS_CRITICAL flag from fuse clock
soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
soc/tegra: fuse: Add runtime PM support
soc/tegra: fuse: Clear fuse->clk on driver probe failure
soc/tegra: pmc: Prevent racing with cpuilde driver
soc/tegra: bpmp: Remove unused including <linux/version.h>
* clk-rockchip:
clk: rockchip: make rk3308 ddrphy4x clock critical
clk: rockchip: drop GRF dependency for rk3328/rk3036 pll types
dt-bindings: clk: Convert rockchip,rk3399-cru to DT schema
clk: rockchip: Add support for hclk_sfc on rk3036
clk: rockchip: rk3036: fix up the sclk_sfc parent error
clk: rockchip: add dt-binding clkid for hclk_sfc on rk3036
* clk-at91:
clk: at91: clk-generated: Limit the requested rate to our range
* clk-vc5:
clk: vc5: Add properties for configuring SD/OE behavior
clk: vc5: Use dev_err_probe
dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin
These are updates for drivers that are tied to a particular SoC,
including the correspondig device tree bindings:
- A couple of reset controller changes for unisoc, uniphier, renesas
and zte platforms
- memory controller driver fixes for omap and tegra
- Rockchip io domain driver updates
- Lots of updates for qualcomm platforms, mostly touching their
firmware and power management drivers
- Tegra FUSE and firmware driver updateѕ
- Support for virtio transports in the SCMI firmware framework
- cleanup of ixp4xx drivers, towards enabling multiplatform
support and bringing it up to date with modern platforms
- Minor updates for keystone, mediatek, omap, renesas.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iD8DBQBhLz215t5GS2LDRf4RAjlHAJ473D0PymaTzv68EuPHThG+DEPifQCdGjLq
QGBB6JidIP8rtEdC+LWBB8I=
=M5+N
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are updates for drivers that are tied to a particular SoC,
including the correspondig device tree bindings:
- A couple of reset controller changes for unisoc, uniphier, renesas
and zte platforms
- memory controller driver fixes for omap and tegra
- Rockchip io domain driver updates
- Lots of updates for qualcomm platforms, mostly touching their
firmware and power management drivers
- Tegra FUSE and firmware driver updateѕ
- Support for virtio transports in the SCMI firmware framework
- cleanup of ixp4xx drivers, towards enabling multiplatform support
and bringing it up to date with modern platforms
- Minor updates for keystone, mediatek, omap, renesas"
* tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
reset: simple: remove ZTE details in Kconfig help
soc: rockchip: io-domain: Remove unneeded semicolon
soc: rockchip: io-domain: add rk3568 support
dt-bindings: power: add rk3568-pmu-io-domain support
bus: ixp4xx: return on error in ixp4xx_exp_probe()
soc: renesas: Prefer memcpy() over strcpy()
firmware: tegra: Stop using seq_get_buf()
soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
soc/tegra: fuse: Add runtime PM support
soc/tegra: fuse: Clear fuse->clk on driver probe failure
soc/tegra: pmc: Prevent racing with cpuilde driver
soc/tegra: bpmp: Remove unused including <linux/version.h>
dt-bindings: soc: ti: pruss: Add dma-coherent property
soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex
soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs
dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs
firmware: arm_scmi: Use WARN_ON() to check configured transports
firmware: arm_scmi: Fix boolconv.cocci warnings
soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing
soc: mediatek: mmsys: add MT8365 support
...
core:
- extract i915 eDP backlight into core
- DP aux bus support
- drm_device.irq_enabled removed
- port drivers to native irq interfaces
- export gem shadow plane handling for vgem
- print proper driver name in framebuffer registration
- driver fixes for implicit fencing rules
- ARM fixed rate compression modifier added
- updated fb damage handling
- rmfb ioctl logging/docs
- drop drm_gem_object_put_locked
- define DRM_FORMAT_MAX_PLANES
- add gem fb vmap/vunmap helpers
- add lockdep_assert(once) helpers
- mark drm irq midlayer as legacy
- use offset adjusted bo mapping conversion
vgaarb:
- cleanups
fbdev:
- extend efifb handling to all arches
- div by 0 fixes for multiple drivers
udmabuf:
- add hugepage mapping support
dma-buf:
- non-dynamic exporter fixups
- document implicit fencing rules
amdgpu:
- Initial Cyan Skillfish support
- switch virtual DCE over to vkms based atomic
- VCN/JPEG power down fixes
- NAVI PCIE link handling fixes
- AMD HDMI freesync fixes
- Yellow Carp + Beige Goby fixes
- Clockgating/S0ix/SMU/EEPROM fixes
- embed hw fence in job
- rework dma-resv handling
- ensure eviction to system ram
amdkfd:
- uapi: SVM address range query added
- sysfs leak fix
- GPUVM TLB optimizations
- vmfault/migration counters
i915:
- Enable JSL and EHL by default
- preliminary XeHP/DG2 support
- remove all CNL support (never shipped)
- move to TTM for discrete memory support
- allow mixed object mmap handling
- GEM uAPI spring cleaning
- add I915_MMAP_OBJECT_FIXED
- reinstate ADL-P mmap ioctls
- drop a bunch of unused by userspace features
- disable and remove GPU relocations
- revert some i915 misfeatures
- major refactoring of GuC for Gen11+
- execbuffer object locking separate step
- reject caching/set-domain on discrete
- Enable pipe DMC loading on XE-LPD and ADL-P
- add PSF GV point support
- Refactor and fix DDI buffer translations
- Clean up FBC CFB allocation code
- Finish INTEL_GEN() and friends macro conversions
nouveau:
- add eDP backlight support
- implicit fence fix
msm:
- a680/7c3 support
- drm/scheduler conversion
panfrost:
- rework GPU reset
virtio:
- fix fencing for planes
ast:
- add detect support
bochs:
- move to tiny GPU driver
vc4:
- use hotplug irqs
- HDMI codec support
vmwgfx:
- use internal vmware device headers
ingenic:
- demidlayering irq
rcar-du:
- shutdown fixes
- convert to bridge connector helpers
zynqmp-dsub:
- misc fixes
mgag200:
- convert PLL handling to atomic
mediatek:
- MT8133 AAL support
- gem mmap object support
- MT8167 support
etnaviv:
- NXP Layerscape LS1028A SoC support
- GEM mmap cleanups
tegra:
- new user API
exynos:
- missing unlock fix
- build warning fix
- use refcount_t
-----BEGIN PGP SIGNATURE-----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=vZkA
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights:
- i915 has seen a lot of refactoring and uAPI cleanups due to a
change in the upstream direction going forward
This has all been audited with known userspace, but there may be
some pitfalls that were missed.
- i915 now uses common TTM to enable discrete memory on DG1/2 GPUs
- i915 enables Jasper and Elkhart Lake by default and has preliminary
XeHP/DG2 support
- amdgpu adds support for Cyan Skillfish
- lots of implicit fencing rules documented and fixed up in drivers
- msm now uses the core scheduler
- the irq midlayer has been removed for non-legacy drivers
- the sysfb code now works on more than x86.
Otherwise the usual smattering of stuff everywhere, panels, bridges,
refactorings.
Detailed summary:
core:
- extract i915 eDP backlight into core
- DP aux bus support
- drm_device.irq_enabled removed
- port drivers to native irq interfaces
- export gem shadow plane handling for vgem
- print proper driver name in framebuffer registration
- driver fixes for implicit fencing rules
- ARM fixed rate compression modifier added
- updated fb damage handling
- rmfb ioctl logging/docs
- drop drm_gem_object_put_locked
- define DRM_FORMAT_MAX_PLANES
- add gem fb vmap/vunmap helpers
- add lockdep_assert(once) helpers
- mark drm irq midlayer as legacy
- use offset adjusted bo mapping conversion
vgaarb:
- cleanups
fbdev:
- extend efifb handling to all arches
- div by 0 fixes for multiple drivers
udmabuf:
- add hugepage mapping support
dma-buf:
- non-dynamic exporter fixups
- document implicit fencing rules
amdgpu:
- Initial Cyan Skillfish support
- switch virtual DCE over to vkms based atomic
- VCN/JPEG power down fixes
- NAVI PCIE link handling fixes
- AMD HDMI freesync fixes
- Yellow Carp + Beige Goby fixes
- Clockgating/S0ix/SMU/EEPROM fixes
- embed hw fence in job
- rework dma-resv handling
- ensure eviction to system ram
amdkfd:
- uapi: SVM address range query added
- sysfs leak fix
- GPUVM TLB optimizations
- vmfault/migration counters
i915:
- Enable JSL and EHL by default
- preliminary XeHP/DG2 support
- remove all CNL support (never shipped)
- move to TTM for discrete memory support
- allow mixed object mmap handling
- GEM uAPI spring cleaning
- add I915_MMAP_OBJECT_FIXED
- reinstate ADL-P mmap ioctls
- drop a bunch of unused by userspace features
- disable and remove GPU relocations
- revert some i915 misfeatures
- major refactoring of GuC for Gen11+
- execbuffer object locking separate step
- reject caching/set-domain on discrete
- Enable pipe DMC loading on XE-LPD and ADL-P
- add PSF GV point support
- Refactor and fix DDI buffer translations
- Clean up FBC CFB allocation code
- Finish INTEL_GEN() and friends macro conversions
nouveau:
- add eDP backlight support
- implicit fence fix
msm:
- a680/7c3 support
- drm/scheduler conversion
panfrost:
- rework GPU reset
virtio:
- fix fencing for planes
ast:
- add detect support
bochs:
- move to tiny GPU driver
vc4:
- use hotplug irqs
- HDMI codec support
vmwgfx:
- use internal vmware device headers
ingenic:
- demidlayering irq
rcar-du:
- shutdown fixes
- convert to bridge connector helpers
zynqmp-dsub:
- misc fixes
mgag200:
- convert PLL handling to atomic
mediatek:
- MT8133 AAL support
- gem mmap object support
- MT8167 support
etnaviv:
- NXP Layerscape LS1028A SoC support
- GEM mmap cleanups
tegra:
- new user API
exynos:
- missing unlock fix
- build warning fix
- use refcount_t"
* tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm: (1318 commits)
drm/amd/display: Move AllowDRAMSelfRefreshOrDRAMClockChangeInVblank to bounding box
drm/amd/display: Remove duplicate dml init
drm/amd/display: Update bounding box states (v2)
drm/amd/display: Update number of DCN3 clock states
drm/amdgpu: disable GFX CGCG in aldebaran
drm/amdgpu: Clear RAS interrupt status on aldebaran
drm/amdgpu: Add support for RAS XGMI err query
drm/amdkfd: Account for SH/SE count when setting up cu masks.
drm/amdgpu: rename amdgpu_bo_get_preferred_pin_domain
drm/amdgpu: drop redundant cancel_delayed_work_sync call
drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend
drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend
drm/amdkfd: map SVM range with correct access permission
drm/amdkfd: check access permisson to restore retry fault
drm/amdgpu: Update RAS XGMI Error Query
drm/amdgpu: Add driver infrastructure for MCA RAS
drm/amd/display: Add Logging for HDMI color depth information
drm/amd/amdgpu: consolidate PSP TA init shared buf functions
drm/amd/amdgpu: add name field back to ras_common_if
drm/amdgpu: Fix build with missing pm_suspend_target_state module export
...
-----BEGIN PGP SIGNATURE-----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=PQpb
-----END PGP SIGNATURE-----
Merge tag 'media/v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new sensor drivers: imx335, imx412, ov9282
- new IR transmitter driver: meson-ir-tx
- handro driver gained support for H.264 for Rockchip VDPU2
- imx gained support for i.MX8MQ
- ti-vpe has gained support for other SoC variants
- lots of cleanups, fixes, board additions and doc improvements
* tag 'media/v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (195 commits)
media: venus: venc: add support for V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM control
media: venus: venc: Add support for intra-refresh period
media: v4l2-ctrls: Add intra-refresh period control
media: docs: ext-ctrls-codec: Document cyclic intra-refresh zero control value
media: venus: helper: do not set constrained parameters for UBWC
media: venus: venc: Fix potential null pointer dereference on pointer fmt
media: venus: hfi: fix return value check in sys_get_prop_image_version()
media: tegra-cec: Handle errors of clk_prepare_enable()
media: cec-pin: rename timer overrun variables
media: TDA1997x: report -ENOLINK after disconnecting HDMI source
media: TDA1997x: fix tda1997x_query_dv_timings() return value
media: Fix cosmetic error in TDA1997x driver
media: v4l2-dv-timings.c: fix wrong condition in two for-loops
media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
media: dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller
media: imx: imx7_mipi_csis: convert some switch cases to the default
media: imx: imx7-media-csi: Fix buffer return upon stream start failure
media: imx: imx7-media-csi: Don't set PIXEL_BIT in CSICR1
media: imx: imx7-media-csi: Set TWO_8BIT_SENSOR for >= 10-bit formats
media: dt-bindings: media: nxp,imx7-csi: Add i.MX8MM support
...
There are a few intensive changes in ALSA core side at this time that
helped the significant code reduction. Meanwhile we keep getting new
stuff, so the total size still grows...
Anyway, the below are some highlights in this development cycle.
ALSA core:
- New helpers to manage page allocations and card object with devres
- Refactoring for memory allocation with wc-pages
- A new PCM hardware flag SNDRV_PCM_INFO_EXPLICIT_SYNC for controlling
the explicit sync of the stream control; it'll be used for ASoC SOF
and non-coherent memory in future
ASoC:
- Lots of cleanups and improvements to the Intel drivers, including
some new systems support
- New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek Mt8195,
Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P, Renesas RZ/G2L,
Rockchip RK3568 S/PDIF
USB-audio:
- Re-organized the quirk handling and a new option quirk_flags
- Fix for a regression in 5.14 code change for JACK
- Quirks for Sony WALKMAN, Digidesign mbox
HD-audio:
- Enhanced support for CS8409 codec
- More consistent shutdown behavior with the runtime PM
- The model option can accept the PCI or codec SSID as an alias
- Quirks for ASUS ROG, HP Spectre x360
Others:
- Lots of code reduction in legacy drivers with devres helpers
- FireWire MOTU 896HD support
-----BEGIN PGP SIGNATURE-----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=fHyJ
-----END PGP SIGNATURE-----
Merge tag 'sound-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There are a few intensive changes in ALSA core side at this time that
helped with significant code reduction. Meanwhile we keep getting new
stuff, so the total size still grows...
Anyway, the below are some highlights in this development cycle.
ALSA core:
- New helpers to manage page allocations and card object with devres
- Refactoring for memory allocation with wc-pages
- A new PCM hardware flag SNDRV_PCM_INFO_EXPLICIT_SYNC for
controlling the explicit sync of the stream control; it'll be used
for ASoC SOF and non-coherent memory in future
ASoC:
- Lots of cleanups and improvements to the Intel drivers, including
some new systems support
- New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek Mt8195,
Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P, Renesas RZ/G2L,
Rockchip RK3568 S/PDIF
USB-audio:
- Re-organized the quirk handling and a new option quirk_flags
- Fix for a regression in 5.14 code change for JACK
- Quirks for Sony WALKMAN, Digidesign mbox
HD-audio:
- Enhanced support for CS8409 codec
- More consistent shutdown behavior with the runtime PM
- The model option can accept the PCI or codec SSID as an alias
- Quirks for ASUS ROG, HP Spectre x360
Others:
- Lots of code reduction in legacy drivers with devres helpers
- FireWire MOTU 896HD support"
* tag 'sound-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (421 commits)
ASoC: Revert PCM trigger changes
ALSA: usb-audio: Add lowlatency module option
ALSA: hda/cs8409: Initialize Codec only in init fixup.
ALSA: hda/cs8409: Ensure Type Detection is only run on startup when necessary
ALSA: usb-audio: Work around for XRUN with low latency playback
ALSA: pcm: fix divide error in snd_pcm_lib_ioctl
ASoC: soc-pcm: test refcount before triggering
ASoC: soc-pcm: protect BE dailink state changes in trigger
ASoC: wcd9335: Disable irq on slave ports in the remove function
ASoC: wcd9335: Fix a memory leak in the error handling path of the probe function
ASoC: wcd9335: Fix a double irq free in the remove function
ALSA: hda: Disable runtime resume at shutdown
ASoC: rockchip: i2s: Add support for frame inversion
ASoC: dt-bindings: rockchip: Add compatible strings for more SoCs
ASoC: rockchip: i2s: Add compatible for more SoCs
ASoC: rockchip: i2s: Make playback/capture optional
ASoC: rockchip: i2s: Fixup config for DAIFMT_DSP_A/B
ASoC: dt-bindings: rockchip: Document reset property for i2s
ASoC: rockchip: i2s: Fix regmap_ops hang
ASoC: rockchip: i2s: Improve dma data transfer efficiency
...
Here is the big set of USB and Thunderbolt patches for 5.15-rc1.
Nothing huge in here, just lots of constant forward progress on a number
of different drivers and hardware support:
- more USB 4/Thunderbolt support added
- dwc3 driver updates and additions
- usb gadget fixes and addtions for new types
- udc gadget driver updates
- host controller updates
- removal of obsolete drivers
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS9+Tw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymqyQCgxWjp4VD9Ycbz1XsHRIkkERWj6WgAnRe4mCpG
n5csYXATbYUD0UdH0hru
=xZCV
-----END PGP SIGNATURE-----
Merge tag 'usb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt patches for 5.15-rc1.
Nothing huge in here, just lots of constant forward progress on a
number of different drivers and hardware support:
- more USB 4/Thunderbolt support added
- dwc3 driver updates and additions
- usb gadget fixes and addtions for new types
- udc gadget driver updates
- host controller updates
- removal of obsolete drivers
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits)
usb: isp1760: otg control register access
usb: isp1760: use the right irq status bit
usb: isp1760: write to status and address register
usb: isp1760: fix qtd fill length
usb: isp1760: fix memory pool initialization
usb: typec: tcpm: Fix spelling mistake "atleast" -> "at least"
usb: dwc2: Fix spelling mistake "was't" -> "wasn't"
usb: renesas_usbhs: Fix spelling mistake "faile" -> "failed"
usb: host: xhci-rcar: Don't reload firmware after the completion
usb: xhci-mtk: allow bandwidth table rollover
usb: mtu3: fix random remote wakeup
usb: mtu3: return successful suspend status
usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint
usb: xhci-mtk: modify the SOF/ITP interval for mt8195
usb: xhci-mtk: add a member of num_esit
usb: xhci-mtk: check boundary before check tt
usb: xhci-mtk: update fs bus bandwidth by bw_budget_table
usb: xhci-mtk: fix issue of out-of-bounds array access
usb: xhci-mtk: support option to disable usb2 ports
usb: xhci-mtk: fix use-after-free of mtk->hcd
...
Here is the "big" set of tty/serial driver patches for 5.15-rc1
Nothing major in here at all, just some driver updates and more cleanups
on old tty apis and code that needed it that includes:
- tty.h cleanup of things that didn't belong in it
- other tty cleanups by Jiri
- driver cleanups
- rs485 support added to amba-pl011 driver
- dts updates
- stm32 serial driver updates
- other minor fixes and driver updates
All have been in linux-next for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS9/lg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylZNwCggKViEViSGqJFIafAZZjmI3Nt6tUAoMkRlhcd
n1MS3snS0Sq+7BdJs37M
=GyxP
-----END PGP SIGNATURE-----
Merge tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the "big" set of tty/serial driver patches for 5.15-rc1
Nothing major in here at all, just some driver updates and more
cleanups on old tty apis and code that needed it that includes:
- tty.h cleanup of things that didn't belong in it
- other tty cleanups by Jiri
- driver cleanups
- rs485 support added to amba-pl011 driver
- dts updates
- stm32 serial driver updates
- other minor fixes and driver updates
All have been in linux-next for a while with no reported problems"
* tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (83 commits)
tty: serial: uartlite: Use read_poll_timeout for a polling loop
tty: serial: uartlite: Use constants in early_uartlite_putc
tty: Fix data race between tiocsti() and flush_to_ldisc()
serial: vt8500: Use of_device_get_match_data
serial: tegra: Use of_device_get_match_data
serial: 8250_ingenic: Use of_device_get_match_data
tty: serial: linflexuart: Remove redundant check to simplify the code
tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp
tty: serial: fsl_lpuart: enable two stop bits for lpuart32
tty: serial: fsl_lpuart: fix the wrong mapbase value
mxser: use semi-colons instead of commas
tty: moxa: use semi-colons instead of commas
tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback
tty: replace in_irq() with in_hardirq()
serial: sh-sci: fix break handling for sysrq
serial: stm32: use devm_platform_get_and_ioremap_resource()
serial: stm32: use the defined variable to simplify code
Revert "arm pl011 serial: support multi-irq request"
tty: serial: samsung: Add Exynos850 SoC data
tty: serial: samsung: Fix driver data macros style
...
Here is the big set of staging and IIO driver updates for 5.15-rc1.
Also included in here are the counter driver subsystem updates as the
IIO drivers needed them.
Lots of churn in some staging drivers, we dropped the "old" rtl8188eu
driver and replaced it with a newer version of the driver that had been
maintained out-of-tree by Larry with the end goal of actually being able
to get this driver out of staging eventually. Despite that driver being
"newer" the line count of this pull request is going up.
Some drivers moved out of staging as well, which is always nice to see,
that is why there are additions to the mfc and misc driver subsystems.
All of these were acked by the various subsystem maintainers involved.
But by far, as normal, it's coding style cleanups all over the
drivers/staging/ tree in here.
Full details of these changes are in the shortlog.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+BKg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yku5gCgyMykJ2mwtEiQxfAWu13e2iZX29AAnjk38ANp
Un2sQXYnL9RVlcnjLg+X
=jMWL
-----END PGP SIGNATURE-----
Merge tag 'staging-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull IIO and staging driver updates from Greg KH:
"Here is the big set of staging and IIO driver updates for 5.15-rc1.
Also included in here are the counter driver subsystem updates as the
IIO drivers needed them.
Lots of churn in some staging drivers, we dropped the "old" rtl8188eu
driver and replaced it with a newer version of the driver that had
been maintained out-of-tree by Larry with the end goal of actually
being able to get this driver out of staging eventually. Despite that
driver being "newer" the line count of this pull request is going up.
Some drivers moved out of staging as well, which is always nice to
see, that is why there are additions to the mfc and misc driver
subsystems. All of these were acked by the various subsystem
maintainers involved.
But by far, as normal, it's coding style cleanups all over the
drivers/staging/ tree in here.
Full details of these changes are in the shortlog.
All of these have been in linux-next for a while with no reported
problems"
[ Note: the r8188eu merge clashed with commit 89939e8906 ("staging:
rtlwifi: use siocdevprivate") from the networking tree. When resolving
the issue, I noted that the whole r8188eu rtw_android code is dead
since commit ae7471cae0 ("staging: r8188eu: remove rtw_ioctl
function").
End result: the merge resolution was to throw all of that away,
rather than do the mindless fixup to code that isn't actually
reachable - Linus ]
* tag 'staging-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (551 commits)
staging: vt6655: Remove filenames in files
staging: r8188eu: add extra TODO entries
staging: vt6656: Remove filenames in files
staging: wlan-ng: fix invalid assignment warning
staging: r8188eu: rename fields of struct rtl_ps
staging: r8188eu: remove ODM_DynamicPrimaryCCA_DupRTS()
staging: r8188eu: rename fields of struct dyn_primary_cca
staging: r8188eu: rename struct field Wifi_Error_Status
staging: r8188eu: Provide a TODO file for this driver
staging: r8188eu: remove unneeded variable
staging: r8188eu: remove unneeded conversions to bool
staging: r8188eu: remove {read,write}_macreg
staging: r8188eu: core: remove condition with no effect
staging: r8188eu: remove ethernet.h header file
staging: r8188eu: remove ip.h header file
staging: r8188eu: remove if_ether.h header file
staging: r8188eu: make rtw_deinit_intf_priv return void
staging: r8188eu: use is_multicast_ether_addr in os_dep/recv_linux.c
staging: r8188eu: use is_multicast_ether_addr in hal/rtl8188eu_xmit.c
staging: r8188eu: use is_multicast_ether_addr in core/rtw_xmit.c
...
Quite a quiet release this time, mostly a combination of cleanups
and a good set of new drivers.
- Lots of cleanups and improvements to the Intel drivers,
including some new systems support.
- New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek
Mt8195, Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P,
Renesas RZ/G2L,, Rockchip RK3568 S/PDIF.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmEsxhYTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0Py1B/0dVvB5iLx7t7Vp3EbxIbAQ/4URpmfV
A/yIWY6fii6vhVsdsqU+8FN7D5m5ZpVUx+3kH//oCsPL7VLem3sjh64lge1lQz4A
9G9FU63nSCY8X0dL4cfZTNEd+FYrCHZDqU8y7oJg+v3U7D42MVLhTwySaCuP6W56
KZhxOUIuyfIrhmkfBEAUCA6jyPSbVAy7Aw9B5WhJhX07yw0vToxnycbTnjwMzMYn
3Bvfycyg9pqpxAdCuJVPVs3S8+CM5/+QjKb0J6vy1Zuw49jNSUdkvuyRWXZsAoAF
zepXWEKXvclKNZDR0N1AO4H+9fUeSvkc/IX7XEHZ0Zk8w2eMico0ceAz
=BHW1
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmEvqq8ACgkQJNaLcl1U
h9DCWgf+MNGZqiPqneyDMVnZ/ZrjZGy+6o0Zs7NDeD0hDF4t5MAu0meRpyHgfW4N
vw/AP26M6OQPg/FQpqHySCuVrsEWFABP3jVUl6QBMIsyGS7FKdU7I20awGzn1+fE
TK2forDsQvxTFA/X9y4JqZIBNCU2FT1WEwamgvFIUh0qR1ZJfHLogN1E8ch7Y17u
EhDgEiwiD3jWtW5E/6KStwpyEo2zEomN0vN6iLp/DjZRQy/B02F3RtKdH4HIom6n
kFs6yOyqBAxzi6uUYC4TfIEywWUrxSUtekeo2Sn7ViSbA0QiN44QdXbN43GFUUHq
c3rzV1+z80mcyYtCAhpjgtbU9nJpUg==
=Zo3t
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.15' into asoc-5.15
ASoC: Updates for v5.15
Quite a quiet release this time, mostly a combination of cleanups
and a good set of new drivers.
- Lots of cleanups and improvements to the Intel drivers,
including some new systems support.
- New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek
Mt8195, Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P,
Renesas RZ/G2L,, Rockchip RK3568 S/PDIF.
Drop the use of the defines including clock and power id, so that
we can remove the headers which are not applied in the example.
Fixes: b5bac34fcf ("dt-bindings: mediatek: mt8195: add audio afe document")
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210831083956.9804-1-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Here is the big set of char/misc driver changes for 5.15-rc1.
Lots of different driver subsystems are being updated in here, notably:
- mhi subsystem update
- fpga subsystem update
- coresight/hwtracing subsystem update
- interconnect subsystem update
- nvmem subsystem update
- parport drivers update
- phy subsystem update
- soundwire subsystem update
and there are some other char/misc drivers being updated as well:
- binder driver additions
- new misc drivers
- lkdtm driver updates
- mei driver updates
- sram driver updates
- other minor driver updates.
Note, there are no habanna labs driver updates in this pull request,
that will probably come later before -rc1 is out in a different request.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+Kyw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymlpACg0JM+hSeo8T5GtwZksZ1QXXQfh8sAoK6Dt6xF
e62OQuuMFT0Un0qOflZk
=emH+
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the big set of char/misc driver changes for 5.15-rc1.
Lots of different driver subsystems are being updated in here,
notably:
- mhi subsystem update
- fpga subsystem update
- coresight/hwtracing subsystem update
- interconnect subsystem update
- nvmem subsystem update
- parport drivers update
- phy subsystem update
- soundwire subsystem update
and there are some other char/misc drivers being updated as well:
- binder driver additions
- new misc drivers
- lkdtm driver updates
- mei driver updates
- sram driver updates
- other minor driver updates.
Note, there are no habanalabs driver updates in this pull request,
that will probably come later before -rc1 is out in a different
request.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits)
Revert "bus: mhi: Add inbound buffers allocation flag"
misc/pvpanic: fix set driver data
VMCI: fix NULL pointer dereference when unmapping queue pair
char: mware: fix returnvar.cocci warnings
parport: remove non-zero check on count
soundwire: cadence: do not extend reset delay
soundwire: intel: conditionally exit clock stop mode on system suspend
soundwire: intel: skip suspend/resume/wake when link was not started
soundwire: intel: fix potential race condition during power down
phy: qcom-qmp: Add support for SM6115 UFS phy
dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings
phy: qmp: Provide unique clock names for DP clocks
lkdtm: remove IDE_CORE_CP crashpoint
lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ
coresight: Replace deprecated CPU-hotplug functions.
Documentation: coresight: Add documentation for CoreSight config
coresight: syscfg: Add initial configfs support
coresight: config: Add preloaded configurations
coresight: etm4x: Add complex configuration handlers to etmv4
coresight: etm-perf: Update to activate selected configuration
...
The proper header is exynos4.h:
samsung,exynos4412-isp-clock.example.dts:19:18: fatal error: dt-bindings/clock/exynos4412.h: No such file or directory
Fixes: 7ac6157809 ("dt-bindings: clock: samsung: convert Exynos4 to dtschema")
Reported-by: Stephen Boyd <sboyd@kernel.org>
Reported-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210831130643.83249-1-krzysztof.kozlowski@canonical.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read
out again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs
in kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by
the router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105)
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmEukBYACgkQMUZtbf5S
IrsyHA//TO8dw18NYts4n9LmlJT2naJ7yBUUSSXK/M+DtW0MQ9nnHhqzPm5uJdRl
IgQTNJrW3dYzRwgqaWZqEwO1t5/FI+f87ND1Nsekg7x9tF66a6ov5WxU26TwwSba
U+si/inQ/4chuQ+LxMQobqCDxaLE46I2dIoRl+YfndJ24DRzYSwAEYIPPbSdfyU+
+/l+3s4GaxO4k/hLciPAiOniyxLoUNiGUTNh+2yqRBXelSRJRKVnl+V22ANFrxRW
nTEiplfVKhlPU1e4iLuRtaxDDiePHhw9I3j/lMHhfeFU2P/gKJIvz4QpGV0CAZg2
1VvDU32WEx1GQLXJbKm0KwoNRUq1QSjOyyFti+BO7ugGaYAR4gKhShOqlSYLzUtB
tbtzQhSNLWOGqgmSJOztZb5kFDm2EdRSll5/lP2uyFlPkIsIp0QbscJVzNTnS74b
Xz15ZOw41Z4TfWPEMWgfrx6Zkm7pPWkly+7WfUkPcHa1gftNz6tzXXxSXcXIBPdi
yQ5JCzzxrM5573YHuk5YedwZpn6PiAt4A/muFGk9C6aXP60TQAOS/ppaUzZdnk4D
NfOk9mj06WEULjYjPcKEuT3GGWE6kmjb8Pu0QZWKOchv7vr6oZly1EkVZqYlXELP
AfhcrFeuufie8mqm0jdb4LnYaAnqyLzlb1J4Zxh9F+/IX7G3yoc=
=JDGD
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read out
again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs in
kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105):
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver"
* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
net: Add depends on OF_NET for LiteX's LiteETH
ipv6: seg6: remove duplicated include
net: hns3: remove unnecessary spaces
net: hns3: add some required spaces
net: hns3: clean up a type mismatch warning
net: hns3: refine function hns3_set_default_feature()
ipv6: remove duplicated 'net/lwtunnel.h' include
net: w5100: check return value after calling platform_get_resource()
net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
fou: remove sparse errors
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
octeontx2-af: Set proper errorcode for IPv4 checksum errors
octeontx2-af: Fix static code analyzer reported issues
octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
octeontx2-af: Fix loop in free and unmap counter
af_unix: fix potential NULL deref in unix_dgram_connect()
dpaa2-eth: Replace strlcpy with strscpy
octeontx2-af: Use NDC TX for transmit packet data
...
that should hopefully get LED names standartized, and many fixes.
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQRPfPO7r0eAhk010v0w5/Bqldv68gUCYS5vtwAKCRAw5/Bqldv6
8oKyAJ4v9knZf1u86MIQxFzucZhPvjeoAACgpIkkT1U/MWbUaHE3X1YyzbKvy8A=
=Zuad
-----END PGP SIGNATURE-----
Merge tag 'leds-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"Usual driver changes, some documentation that should hopefully get LED
names standartized, and many fixes"
* tag 'leds-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (32 commits)
leds: pca955x: Switch to i2c probe_new
leds: pca955x: Let the core process the fwnode
leds: pca955x: Implement the default-state property
leds: pca955x: Add brightness_get function
leds: pca955x: Clean up code formatting
leds: leds-core: Implement the retain-state-shutdown property
dt-bindings: leds: Add retain-state-shutdown boolean
Documentation: leds: standartizing LED names
leds: trigger: remove reference to obsolete CONFIG_IDE_GD_ATA
leds: lp50xx: Fix chip name in KConfig
leds: pwm: add support for default-state device property
leds: move default_state read from fwnode to core
leds: flash: Remove redundant initialization of variable ret
leds: lgm-sso: Propagate error codes from callee to caller
leds: trigger: audio: Add an activate callback to ensure the initial brightness is set
leds: rt8515: Put fwnode in any case during ->probe()
leds: lt3593: Put fwnode in any case during ->probe()
leds: lm3697: Make error handling more robust
leds: lm3697: Update header block to reflect reality
leds: lm3692x: Correct headers (of*.h -> mod_devicetable.h)
...
New drivers for:
- Aquacomputer D5 Next
- SB-RMI power module
Added chip support t oexisting drivers:
- Support for various Zen2 and Zen3 APUs and for Yellow Carp
(SMU v13) added to k10temp driver
- Support for Silicom n5010 PAC added to intel-m10-bmc driver
- Support for BPD-RS600 added to pmbus/bpa-rs600 driver
Other notable changes:
- In k10temp, do not display Tdie on Zen CPUs if there is no
difference between Tdie and Tctl
- Converted adt7470 and dell-smm drivers to use
devm_hwmon_device_register_with_info API
- Support for temperature/pwm tables added to axi-fan-control
driver
- Enabled fan control for Dell Precision 7510 in dell-smm driver
Various other minor improvements and fixes in several drivers.
-----BEGIN PGP SIGNATURE-----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=tQk6
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers for:
- Aquacomputer D5 Next
- SB-RMI power module
Added chip support to existing drivers:
- Support for various Zen2 and Zen3 APUs and for Yellow Carp (SMU
v13) added to k10temp driver
- Support for Silicom n5010 PAC added to intel-m10-bmc driver
- Support for BPD-RS600 added to pmbus/bpa-rs600 driver
Other notable changes:
- In k10temp, do not display Tdie on Zen CPUs if there is no
difference between Tdie and Tctl
- Converted adt7470 and dell-smm drivers to use
devm_hwmon_device_register_with_info API
- Support for temperature/pwm tables added to axi-fan-control driver
- Enabled fan control for Dell Precision 7510 in dell-smm driver
Various other minor improvements and fixes in several drivers"
* tag 'hwmon-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (41 commits)
hwmon: add driver for Aquacomputer D5 Next
hwmon: (adt7470) Convert to devm_hwmon_device_register_with_info API
hwmon: (adt7470) Convert to use regmap
hwmon: (adt7470) Fix some style issues
hwmon: (k10temp) Add support for yellow carp
hwmon: (k10temp) Rework the temperature offset calculation
hwmon: (k10temp) Don't show Tdie for all Zen/Zen2/Zen3 CPU/APU
hwmon: (k10temp) Add additional missing Zen2 and Zen3 APUs
hwmon: remove amd_energy driver in Makefile
hwmon: (dell-smm) Rework SMM function debugging
hwmon: (dell-smm) Mark i8k_get_fan_nominal_speed as __init
hwmon: (dell-smm) Mark tables as __initconst
hwmon: (pmbus/bpa-rs600) Add workaround for incorrect Pin max
hwmon: (pmbus/bpa-rs600) Don't use rated limits as warn limits
hwmon: (axi-fan-control) Support temperature vs pwm points
hwmon: (axi-fan-control) Handle irqs in natural order
hwmon: (axi-fan-control) Make sure the clock is enabled
hwmon: (pmbus/ibm-cffps) Fix write bits for LED control
hwmon: (w83781d) Match on device tree compatibles
dt-bindings: hwmon: Add bindings for Winbond W83781D
...
- Return a proper response in case of an ioctl error
- Issue HPI to interrupt BKOPS for eMMC if it timed out
- Avoid hogging the CPU while polling for busy
- Extend sd8787 pwrseq to support the wilc1000 SDIO
- Remove a couple of confusing warning messages
- Clarify comment for ->card_busy() host ops
MMC host:
- dw_mmc: Add data CRC error injection
- mmci: De-assert reset during ->probe()
- rtsx_pci: Fix long reads when clock is pre-scaled
- sdhci: Correct the tuning command handle for PIO mode
- sdhci-esdhc-imx: Improve support for auto tuning
- sdhci-msm: Add support for the sc7280
- sdhci-of-arasan: Don't auto tune for DDR50 mode for ZynqMP
- sdhci-of-arasan: Enable support for auto cmd12
- sdhci-of-arasan: Use 19MHz for SD default speed for ZynqMP for level shifter
- usdhi6rol0: Implement the ->card_busy() host ops
MEMSTICK:
- A couple of minor cleanups.
-----BEGIN PGP SIGNATURE-----
iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmEsrPsXHHVsZi5oYW5z
c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCnjJA/9G+DDHmJ8zRsKLfLxeyyF3Ovm
b4Iji5HWG5y3mrPPUQ6/murMo1vshXgBqlnoJKt+VFBSSBK1G0Q3huOho9C1ZeTk
Hh6iu6lDUlErzqcEcjAu3CNblXkL7pL+5FFsxjfZ6WeB2OD+DzFllbu1p7wMwfZS
78jgn/LJJnTDsCiDVKMK/Z9nsLXCqzuL4y+fyeOVIgqwcr+hobkA9WCACV5cGCKt
kosPNdeN5llX7qVPl6q5EYsdgXVtftjCjvx9L36sxhnXkKslf7RAdhECvTYR+OPx
wqovNhBKpNYFG8M9wIcdfwsE7RQy2h6hVSsjKaaZQLghd80xLd02VeTR3qH9xuJX
MTyClK0QF9io0sT669umPalYs7eb1ulEAMmv98nNjPHKZQ4FmNNury0VQ57ZJcrj
glVDUkALKLtlT/7gOHTJP6YWD4trdH4s5jIH3pyCStMHrLpNKvDWa0Jnuq25A9YL
BHixobWf+8S7LkDEJIqgZa2s7pgYJug5vEDBXNipQoUiSvtgCfngyFkmoN9JdL8l
6YqJweDclYpvh0Sq/UPPSIaRMYml6P4iBDTK55K2ZgahVG5SeaiY6IxDWIxaQHiE
6dn7yaNy49BRRfLEFlIhKMxQAJfY5wrXH/arIUf52oxItP76mzNNkf9U/U8SQiZu
A7F+R6YvmXgPJ9EMJVk=
=RXpg
-----END PGP SIGNATURE-----
Merge tag 'mmc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC and MEMSTICK updates from Ulf Hansson:
"MMC core:
- Return a proper response in case of an ioctl error
- Issue HPI to interrupt BKOPS for eMMC if it timed out
- Avoid hogging the CPU while polling for busy
- Extend sd8787 pwrseq to support the wilc1000 SDIO
- Remove a couple of confusing warning messages
- Clarify comment for ->card_busy() host ops
MMC host:
- dw_mmc: Add data CRC error injection
- mmci: De-assert reset during ->probe()
- rtsx_pci: Fix long reads when clock is pre-scaled
- sdhci: Correct the tuning command handle for PIO mode
- sdhci-esdhc-imx: Improve support for auto tuning
- sdhci-msm: Add support for the sc7280
- sdhci-of-arasan: Don't auto tune for DDR50 mode for ZynqMP
- sdhci-of-arasan: Enable support for auto cmd12
- sdhci-of-arasan: Use 19MHz for SD default speed for ZynqMP for level shifter
- usdhi6rol0: Implement the ->card_busy() host ops
MEMSTICK:
- A couple of minor cleanups"
* tag 'mmc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits)
mmc: queue: Remove unused parameters(request_queue)
mmc: pwrseq: sd8787: fix compilation warning
mmc: core: Return correct emmc response in case of ioctl error
mmc: sdhci-esdhc-imx: Select the correct mode for auto tuning
mmc: sdhci-esdhc-imx: Remove redundant code for manual tuning
mmc: core: Issue HPI in case the BKOPS timed out
mmc: queue: Match the data type of max_segments
mmc: switch from 'pci_' to 'dma_' API
memstick: switch from 'pci_' to 'dma_' API
memstick: r592: Change the name of the 'pci_driver' structure to be consistent
mmc: pwrseq: add wilc1000_sdio dependency for pwrseq_sd8787
mmc: pwrseq: sd8787: add support for wilc1000
dt-bindings: mmc: Extend pwrseq-sd8787 binding for wilc1000
dt-bindings: mmc: fsl-imx-esdhc: change the pinctrl-names rule
dt-bindings: mmc: fsl-imx-esdhc: add a new compatible string
dt-bindings: mmc: renesas,sdhi: Document RZ/G2L bindings
dt-bindings: mmc: renesas,sdhi: Fix dtbs-check warning
mmc: core: Update ->card_busy() callback comment
mmc: usdhi6rol0: Implement card_busy function
mmc: sdhci: Correct the tuning command handle for PIO mode
...
The zte zx platform was removed in commit 89d4f98ae9 ("ARM: remove zte
zx platform") and the zxdrm driver is going to be removed in v5.15 via
drm tree. Let's remove the now obsolete binding doc.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20210831034924.86-1-yuzenghui@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
The 'arm,vexpress-flash' compatible is in use, but has never been documented,
so add it now.
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20210819182427.1175753-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Pull operating performance points (OPP) framework changes for v5.15
from Viresh Kumar:
"This moves the OPP bindings to DT schema (Rob Herring)."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: opp: Convert to DT schema
dt-bindings: Clean-up OPP binding node names in examples
ARM: dts: omap: Drop references to opp.txt
Convert the fsl,imx6q-pcie.txt into a schema.
- ranges property should be grouped by region, with no functional
changes.
- only one propert is allowed in the compatible string, remove
"snps,dw-pcie".
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://lore.kernel.org/r/1630046580-19282-2-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Rob Herring <robh@kernel.org>
Core code:
- Cure a couple of incorrectness issues in the posix CPU timer code to
prevent that the tick dependency for NOHZ full is kept alive for no
reason.
- Avoid expensive double reprogramming of the clockevent device in
hrtimer_start_range_ns().
- Avoid pointless SMP function calls when the clock was set to avoid
disturbing CPUs which do not have any affected timers queued.
- Make the clocksource watchdog test work correctly when CONFIG_HZ is
less than 100.
Drivers:
- Prefer the ARM architected timer over the Exynos timer which is way
more expensive to access.
- Add device tree bindings for new Ingenic SoCs
- The usual improvements and cleanups all over the place
-----BEGIN PGP SIGNATURE-----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=eP5w
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timekeeping, timers and related drivers:
Core code:
- Cure a couple of correctness issues in the posix CPU timer code to
prevent that the tick dependency for NOHZ full is kept alive for no
reason.
- Avoid expensive double reprogramming of the clockevent device in
hrtimer_start_range_ns().
- Avoid pointless SMP function calls when the clock was set to avoid
disturbing CPUs which do not have any affected timers queued.
- Make the clocksource watchdog test work correctly when CONFIG_HZ is
less than 100.
Drivers:
- Prefer the ARM architected timer over the Exynos timer which is way
more expensive to access.
- Add device tree bindings for new Ingenic SoCs
- The usual improvements and cleanups all over the place"
* tag 'timers-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
clocksource: Make clocksource watchdog test safe for slow-HZ systems
dt-bindings: timer: Add ABIs for new Ingenic SoCs
clocksource/drivers/fttmr010: Pass around less pointers
clocksource/drivers/mediatek: Optimize systimer irq clear flow on shutdown
clocksource/drivers/ingenic: Use bitfield macro helpers
clocksource/drivers/sh_cmt: Fix wrong setting if don't request IRQ for clock source channel
dt-bindings: timer: convert rockchip,rk-timer.txt to YAML
clocksource/drivers/exynos_mct: Mark MCT device as CLOCK_EVT_FEAT_PERCPU
clocksource/drivers/exynos_mct: Prioritise Arm arch timer on arm64
hrtimer: Unbreak hrtimer_force_reprogram()
hrtimer: Use raw_cpu_ptr() in clock_was_set()
hrtimer: Avoid more SMP function calls in clock_was_set()
hrtimer: Avoid unnecessary SMP function calls in clock_was_set()
hrtimer: Add bases argument to clock_was_set()
time/timekeeping: Avoid invoking clock_was_set() twice
timekeeping: Distangle resume and clock-was-set events
timerfd: Provide timerfd_resume()
hrtimer: Force clock_was_set() handling for the HIGHRES=n, NOHZ=y case
hrtimer: Ensure timerfd notification for HIGHRES=n
hrtimer: Consolidate reprogramming code
...
Core changes:
- The usual set of small fixes and improvements all over the place, but nothing
outstanding
MSI changes:
- Further consolidation of the PCI/MSI interrupt chip code
- Make MSI sysfs code independent of PCI/MSI and expose the MSI interrupts
of platform devices in the same way as PCI exposes them.
Driver changes:
- Support for ARM GICv3 EPPI partitions
- Treewide conversion to generic_handle_domain_irq() for all chained
interrupt controllers
- Conversion to bitmap_zalloc() throughout the irq chip drivers
- The usual set of small fixes and improvements
-----BEGIN PGP SIGNATURE-----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=qyll
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates to the interrupt core and driver subsystems:
Core changes:
- The usual set of small fixes and improvements all over the place,
but nothing stands out
MSI changes:
- Further consolidation of the PCI/MSI interrupt chip code
- Make MSI sysfs code independent of PCI/MSI and expose the MSI
interrupts of platform devices in the same way as PCI exposes them.
Driver changes:
- Support for ARM GICv3 EPPI partitions
- Treewide conversion to generic_handle_domain_irq() for all chained
interrupt controllers
- Conversion to bitmap_zalloc() throughout the irq chip drivers
- The usual set of small fixes and improvements"
* tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
platform-msi: Add ABI to show msi_irqs of platform devices
genirq/msi: Move MSI sysfs handling from PCI to MSI core
genirq/cpuhotplug: Demote debug printk to KERN_DEBUG
irqchip/qcom-pdc: Trim unused levels of the interrupt hierarchy
irqdomain: Export irq_domain_disconnect_hierarchy()
irqchip/gic-v3: Fix priority comparison when non-secure priorities are used
irqchip/apple-aic: Fix irq_disable from within irq handlers
pinctrl/rockchip: drop the gpio related codes
gpio/rockchip: drop irq_gc_lock/irq_gc_unlock for irq set type
gpio/rockchip: support next version gpio controller
gpio/rockchip: use struct rockchip_gpio_regs for gpio controller
gpio/rockchip: add driver for rockchip gpio
dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank
pinctrl/rockchip: add pinctrl device to gpio bank struct
pinctrl/rockchip: separate struct rockchip_pin_bank to a head file
pinctrl/rockchip: always enable clock for gpio controller
genirq: Fix kernel doc indentation
EDAC/altera: Convert to generic_handle_domain_irq()
powerpc: Bulk conversion to generic_handle_domain_irq()
nios2: Bulk conversion to generic_handle_domain_irq()
...
A quiet release for SPI, some fixes and a couple of new drivers
plus one small refactoring:
- Move the chip select timing configuration from the controller
to the device to allow a bit more flexibility.
- New drivers for Rockchip SFC and Spreadtrum ADI.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmEszSgTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0GQ1B/94SJFSJgXbpF1povbNxa8g9jmniYYu
LBPr354I6bDuIDJbvx9dAQNBxA5HTUHewN/YRHh0ZSMwG1MhM6EGhPy8fT+vlYex
Cz0GlFVlSDHDzXj7c4ozPMhUiPQDHGGO36LQWs6d50uap0wVBQ9xwX4/waRI8tzS
vDfTYWvs32IEMC2LAR4npWHZQC0YOwY+Ohadt3WX0XPK/AaTLK5+JiIb0041AHYS
U8AIRkdbgNeqTxds2CaKqG2EhcBkzHSP5+C+7UKALL8JuYgr0U2x/HgORDIBiJ5d
JubRxyXQvqPF8v68zNhqY9pulnvQgyNsMmyK7yv46hcNOdJo06b3q3Sn
=Cfvr
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A quiet release for SPI, some fixes and a couple of new drivers plus
one small refactoring:
- Move the chip select timing configuration from the controller to
the device to allow a bit more flexibility
- New drivers for Rockchip SFC and Spreadtrum ADI"
* tag 'spi-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (47 commits)
spi: spi-zynq-qspi: use wait_for_completion_timeout to make zynq_qspi_exec_mem_op not interruptible
spi: add sprd ADI for sc9863 and ums512
spi: Convert sprd ADI bindings to yaml
spi: sprd: Add ADI r3 support
spi: sprd: Fix the wrong WDG_LOAD_VAL
spi: davinci: invoke chipselect callback
spi: sprd: fill offset only to RD_CMD register for reading from slave device
spi: sprd: Make sure offset not equal to slave address size
spi: sprd: Pass offset instead of physical address to adi_read/_write()
spi: rockchip-sfc: Fix assigned but never used return error codes
spi: rockchip-sfc: Remove redundant IO operations
spi: stm32: fix excluded_middle.cocci warnings
spi: coldfire-qspi: Use clk_disable_unprepare in the remove function
spi: tegra20-slink: remove spi_master_put() in tegra_slink_remove()
spi: rockchip-sfc: add rockchip serial flash controller
spi: rockchip-sfc: Bindings for Rockchip serial flash controller
spi: orion: Prevent incorrect chip select behaviour
spi: mxic: add missing braces
spi: spi-pic32: Fix issue with uninitialized dma_slave_config
spi: spi-fsl-dspi: Fix issue with uninitialized dma_slave_config
...
'enum' is equivalent to 'oneOf' with a list of 'const' entries, but 'enum'
is more concise and yields better error messages.
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Vignesh R <vigneshr@ti.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: dmaengine@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: linux-phy@lists.infradead.org
Cc: linux-serial@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-spi@vger.kernel.org
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> (mipi-ccs)
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210824202014.978922-1-robh@kernel.org
This adds device tree bindings for the IXP46x PTP Timer, a companion
to the IXP4xx ethernet in newer platforms.
Cc: devicetree@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the mailbox compatible for the MSM8953 SoC.
Signed-off-by: Vladimir Lypak <junak.pub@gmail.com>
Signed-off-by: Sireesh Kodali <sireeshkodali@protonmail.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add compatible for the Qualcomm SM4250/6115 APCS block to the Qualcomm
APCS binding.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add documentation for the mt8192 gce.
Add gce header file defined the gce hardware event,
subsys number and constant for mt8192.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Convert the TI TSC2004/TSC2005 DT bindings to YAML schema.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210620210708.100147-1-marex@denx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert Samsung S5Pv210 Audio SubSystem clock controller bindings to DT
schema format using json-schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20210825134251.220098-2-krzysztof.kozlowski@canonical.com
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert Samsung Exynos Audio SubSystem clock controller bindings to DT
schema format using json-schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20210825134251.220098-1-krzysztof.kozlowski@canonical.com
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Document the bindings for Samsung Exynos external to SoC
(oscclk/XXTI/XusbXTI) clock provided on boards. The bindings are
already implemented in most of the Exynos clock drivers and DTS files.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210825134056.219884-3-krzysztof.kozlowski@canonical.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert Samsung Exynos5250 clock controller bindings to DT schema format
using json-schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20210825134056.219884-2-krzysztof.kozlowski@canonical.com
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
These properties allow configuring the SD/OE pin as described in the
datasheet.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Link: https://lore.kernel.org/r/20210809223813.3766204-1-sean.anderson@seco.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
armpll clocks (available on Cygnus and Northstar Plus) are simple clocks
with no cells. Adjust binding props #clock-cells and clock-output-names
to handle them.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20210819052918.6753-1-zajec5@gmail.com
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add bindings and update documentation for clock rpmh driver on SM6350.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210820203243.230157-2-konrad.dybcio@somainline.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add device tree bindings for global clock controller on SM6115 and
SM4250 SoCs (pin and software compatible).
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210805161107.1194521-2-iskren.chernev@gmail.com
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
These patches fixup or update for rockchip i2s.
Changes in v3:
- Drop property 'rockchip,playback-only', 'rockchip,capture-only'.
Implement it by 'dma-names' of DT instead.
Changes in v2:
- split property trcm into single 'trcm-sync-tx-only' and
'trcm-sync-rx-only' suggested by Nicolas.
- split property trcm into single 'trcm-sync-tx-only' and
'trcm-sync-rx-only' suggested by Nicolas.
- drop change-id
Sugar Zhang (12):
ASoC: rockchip: i2s: Add support for set bclk ratio
ASoC: rockchip: i2s: Fixup clk div error
ASoC: rockchip: i2s: Improve dma data transfer efficiency
ASoC: rockchip: i2s: Fix regmap_ops hang
ASoC: rockchip: i2s: Fix concurrency between tx/rx
ASoC: rockchip: i2s: Reset the controller if soft reset failed
ASoC: dt-bindings: rockchip: Document reset property for i2s
ASoC: rockchip: i2s: Make playback/capture optional
ASoC: rockchip: i2s: Add compatible for more SoCs
ASoC: dt-bindings: rockchip: Add compatible strings for more SoCs
ASoC: rockchip: i2s: Add support for frame inversion
ASoC: dt-bindings: rockchip: i2s: Document property TRCM
Xiaotan Luo (1):
ASoC: rockchip: i2s: Fixup config for DAIFMT_DSP_A/B
Xing Zheng (1):
ASoC: rockchip: i2s: Add support for TRCM property
.../devicetree/bindings/sound/rockchip-i2s.yaml | 19 ++
sound/soc/rockchip/rockchip_i2s.c | 278 +++++++++++++++------
sound/soc/rockchip/rockchip_i2s.h | 10 +-
3 files changed, 224 insertions(+), 83 deletions(-)
--
2.7.4
There are two independent PCIe controllers in MT2712 and MT7622
platform. Each of them should contain an independent MSI domain.
In old dts architecture, MSI domain will be inherited from the root
bridge, and all of the devices will share the same MSI domain.
Hence that, the PCIe devices will not work properly if the irq number
which required is more than 32.
Split the PCIe node for MT2712 and MT7622 platform to comply with
the hardware design and fix MSI issue.
Link: https://lore.kernel.org/r/20210823032800.1660-2-chuanjia.liu@mediatek.com
Signed-off-by: Chuanjia Liu <chuanjia.liu@mediatek.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh+dt@kernel.org>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
There are 4 USB controllers on MT8195, the controllers (IP1~IP3,
exclude IP0) have a wrong default SOF/ITP interval which is
calculated from the frame counter clock 24Mhz by default, but
in fact, the frame counter clock is 48Mhz, so we should set
the accurate interval according to 48Mhz. Here add a new compatible
for MT8195, it's also supported in driver. But the first controller
(IP0) has no such issue, we prefer to use generic compatible,
e.g. mt8192's compatible.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1629189389-18779-2-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support to disable specific usb2 host ports, it's useful when
a usb2 port is disabled on some platforms, but enabled on others for
the same SoC, another case is that the different package may support
different number of ports.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1629189389-18779-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LiteETH is a small footprint and configurable Ethernet core for FPGA
based system on chips.
The hardware is parametrised by the size and number of the slots in it's
receive and send buffers. These are described as properties, with the
commonly used values set as the default.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the SC7280 PDC Global and RZ/G2L USB/PHY reset
controllers, convert UniPhier glue device tree bindings to json-schema
and remove a leftover mention of ZTE zx2967 from Kconfig.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCYSOy1BcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwKxPAQDYffSCcsiXIcZqwO8mpBspzw+R
rWTqcUeszNXJtPY0rwD/VFs7ESt2RijkKPJeP6VV7VvJkmzaRhFDtLB3MdyG1Qk=
=60wV
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=/KnZ
-----END PGP SIGNATURE-----
Merge tag 'reset-for-v5.15' of git://git.pengutronix.de/pza/linux into arm/drivers
Reset controller updates for v5.15
Add support for the SC7280 PDC Global and RZ/G2L USB/PHY reset
controllers, convert UniPhier glue device tree bindings to json-schema
and remove a leftover mention of ZTE zx2967 from Kconfig.
* tag 'reset-for-v5.15' of git://git.pengutronix.de/pza/linux:
reset: simple: remove ZTE details in Kconfig help
reset: renesas: Add RZ/G2L usbphy control driver
dt-bindings: reset: Document RZ/G2L USBPHY Control bindings
dt-bindings: reset: Convert UniPhier glue reset to json-schema
reset: qcom: Add PDC Global reset signals for WPSS
dt-bindings: reset: pdc: Add PDC Global bindings
dt-bindings: reset: aoss: Add AOSS reset controller binding
Link: https://lore.kernel.org/r/d42a75fc17ce718ef1b3fa4c5d3f5c7fb0bd2bc2.camel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support for handling the "linux,usable-memory-range" property in the
"/chosen" node to the FDT core code. This can co-exist safely with the
architecture-specific handling, until the latter has been removed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/3bd69bada93ee59b7d23c38b3527fc1654e19343.1628670468.git.geert+renesas@glider.be
There are two methods to specify the location of the elf core headers:
using the "elfcorehdr=" kernel parameter, as handled by generic code in
kernel/crash_dump.c, or using the "linux,elfcorehdr" property under the
"/chosen" node in the Device Tree, as handled by architecture-specific
code in arch/arm64/mm/init.c.
Extend support for "linux,elfcorehdr" to all platforms supporting DT by
adding platform-agnostic handling for handling this property to the FDT
core code. This can co-exist safely with the architecture-specific
handling, until the latter has been removed.
This requires moving the call to of_scan_flat_dt() up, as the code
scanning the "/chosen" node now needs to be aware of the values of
"#address-cells" and "#size-cells".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/c7e46e50aaf87ef49bdaa61358d25b122f32b7df.1628670468.git.geert+renesas@glider.be
Convert Samsung Exynos5422 SoC frequency and voltage scaling for
Dynamic Memory Controller to DT schema format using json-schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20210820150353.161161-3-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Samsung Exynos PPMU bindings to DT schema format using
json-schema. The example is quite different due to the nature of
dtschema examples parsing (no overriding via-label allowed).
New bindings contain copied description from previous bindings document,
therefore the license is set as GPL-2.0-only.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210820150353.161161-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Samsung Exynos NoC Probe bindings to DT schema format using
json-schema.
New bindings contain copied description from previous bindings document,
therefore the license is set as GPL-2.0-only.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210820150353.161161-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
This patch adds mt8195 audio afe document.
In order to support dynamic clock reparenting for ADDA and ETDM, PLL
and MUX clocks are requested even though they are not consumed by afe
directly.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210819084144.18483-8-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Updates:
- Yaml conversion for Freescale imx8mq usb phy, TI AM654 SERDES phy,
Cadence torrent phy
- Updates for Amlogic Meson8b-usb2 phy, Samsung ufs phy
- New support:
- UFS phy for Qualcomm SM6115
- PCIe & USB/DP phy for Qualcomm sc8180x
- USB3 PHY support for Qualcomm IPQ6018
- Renesas USB2.0 PHY for RZ/G2L
-----BEGIN PGP SIGNATURE-----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=3U1A
-----END PGP SIGNATURE-----
Merge tag 'phy-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next
Vinod writes:
phy-for-5.15
- Updates:
- Yaml conversion for Freescale imx8mq usb phy, TI AM654 SERDES phy,
Cadence torrent phy
- Updates for Amlogic Meson8b-usb2 phy, Samsung ufs phy
- New support:
- UFS phy for Qualcomm SM6115
- PCIe & USB/DP phy for Qualcomm sc8180x
- USB3 PHY support for Qualcomm IPQ6018
- Renesas USB2.0 PHY for RZ/G2L
* tag 'phy-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (45 commits)
phy: qcom-qmp: Add support for SM6115 UFS phy
dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings
phy: qmp: Provide unique clock names for DP clocks
phy: xilinx: zynqmp: skip PHY initialization and PLL lock for USB
phy: amlogic: meson8b-usb2: don't log an error on -EPROBE_DEFER
phy: amlogic: meson8b-usb2: Power off the PHY by putting it into reset mode
phy: phy-mtk-mipi-dsi: convert to devm_platform_ioremap_resource
phy: phy-mtk-mipi-dsi: remove dummy assignment of error number
phy: phy-mtk-hdmi: convert to devm_platform_ioremap_resource
phy: phy-mtk-ufs: use clock bulk to get clocks
phy: phy-mtk-tphy: remove error log of ioremap failure
phy: phy-mtk-tphy: print error log using child device
phy: phy-mtk-tphy: support type switch by pericfg
phy: phy-mtk-tphy: use clock bulk to get clocks
dt-bindings: phy: mediatek: tphy: support type switch by pericfg
phy: cadence-torrent: Check PIPE mode PHY status to be ready for operation
phy: cadence-torrent: Add debug information for PHY configuration
phy: cadence-torrent: Add separate functions for reusable code
phy: cadence-torrent: Add PHY configuration for DP with 100MHz ref clock
phy: cadence-torrent: Add PHY registers for DP in array format
...
Here are changes for the 5.15-rc1 merge window consisting of interconnect
core and driver updates.
Framework change:
- Add sanity check to detect if node is already added to provider.
Driver changes:
- RPMh drivers probe function consolidation
- Add driver for SC8180x platforms
- Add support for SC8180x OSM L3
- Use driver-specific naming in OSM L3
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=K/bk
-----END PGP SIGNATURE-----
Merge tag 'icc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 5.15
Here are changes for the 5.15-rc1 merge window consisting of interconnect
core and driver updates.
Framework change:
- Add sanity check to detect if node is already added to provider.
Driver changes:
- RPMh drivers probe function consolidation
- Add driver for SC8180x platforms
- Add support for SC8180x OSM L3
- Use driver-specific naming in OSM L3
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: osm-l3: Use driver-specific naming
interconnect: qcom: osm-l3: Add sc8180x support
dt-bindings: interconnect: Add SC8180x to OSM L3 DT binding
interconnect: qcom: Add SC8180x providers
dt-bindings: interconnect: Add Qualcomm SC8180x DT bindings
interconnect: Sanity check that node isn't already on list
interconnect: qcom: icc-rpmh: Consolidate probe functions
Convert H8/300 bus controller bindings to DT schema format using
json-schema.
The conversion also extends the bindings to match what is really used in
existing devicetree sources (the original file mentions only
"renesas,h8300-bsc" but "renesas,h8300h-bsc" and "renesas,h8s-bsc" are
used with it).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210818202953.16862-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
Use common enum instead of oneOf and correct indentation warning:
realtek,rt1015p.yaml:18:7: [warning] wrong indentation: expected 4 but found 6 (indentation)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Tzung-Bi Shih <tzungbi@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210819101020.26368-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the OPP v1 and v2 bindings to DT schema format. As the OPPv2 binding
can be extended by vendors, we need to split the common part out from the
"operating-points-v2" conforming compatible.
Cc: Yangtao Li <tiny.windzz@gmail.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In preparation to convert OPP bindings to DT schema, clean-up a few OPP
binding node names in the binding examples.
Cc: Georgi Djakov <djakov@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* A fix to the sifive-l2-cache device tree bindings, for json-schema
compatibility. This does not change the intended behavior of the
binding.
* A fix to avoid improperly freeing necessary resources during early
boot.
-----BEGIN PGP SIGNATURE-----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=xEwN
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- fix the sifive-l2-cache device tree bindings for json-schema
compatibility. This does not change the intended behavior of the
binding.
- avoid improperly freeing necessary resources during early boot.
* tag 'riscv-for-linus-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix a number of free'd resources in init_resources()
dt-bindings: sifive-l2-cache: Fix 'select' matching
Document DT bindings for PCIe controller found on Intel Keem Bay SoC.
Link: https://lore.kernel.org/r/20210805211010.29484-2-srikanth.thokala@intel.com
Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
Signed-off-by: Srikanth Thokala <srikanth.thokala@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Document the retain-state-shutdown property that indicates that a LED
should not be turned off or changed during system shutdown.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
When the schema fixups are applied to 'select' the result is a single
entry is required for a match, but that will never match as there should
be 2 entries. Also, a 'select' schema should have the widest possible
match, so use 'contains' which matches the compatible string(s) in any
position and not just the first position.
Fixes: 993dcfac64 ("dt-bindings: riscv: sifive-l2-cache: convert bindings to json-schema")
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add binding to specify virtual function (associated with each physical
function) in endpoint mode.
Link: https://lore.kernel.org/r/20210819123343.1951-2-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Convert the Bosch C_CAN/D_CAN controller device tree binding
documentation to json-schema.
Document missing properties.
Remove "ti,hwmods" as it is no longer used in TI dts.
Make "clocks" required as it is used in all dts.
Update the examples.
Link: https://lore.kernel.org/r/20210805192750.9051-1-dariobin@libero.it
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Enable termination-* binding and provide validation example for it.
Link: https://lore.kernel.org/r/20210818071232.20585-3-o.rempel@pengutronix.de
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Some boards provide GPIO controllable termination resistor. Provide
binding to make use of it.
Link: https://lore.kernel.org/r/20210818071232.20585-2-o.rempel@pengutronix.de
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The 'contains' keyword applies to elements within an array, so
using 'items' only makes sense if the elements of the array are another
array which is not the case for 'compatible' properties.
Looking at the driver, it seems the intent was the condition should be
true when 'faraday,ftpci100' is present, so we can drop
'cortina,gemini-pci'.
Fixes: 2720b99133 ("dt-bindings: PCI: ftpci100: convert faraday,ftpci100 to YAML")
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-pci@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210817174743.541353-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Synopsys IntelliDDR Multi Protocol memory controller (present in
Xilinx Zynq and ZynqMP) bindings to DT schema format using json-schema.
New binding contains copied parts of description from previous binding
document, therefore the license is set as GPL-2.0-only.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210818113139.84869-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Broadcom DDR PHY Front End (DPFE) bindings to DT schema format
using json-schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Markus Mayer <mmayer@broadcom.com>
Link: https://lore.kernel.org/r/20210817080617.14503-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
This fixes the "shared memory state machine" (SMSM) interrupt logic to
avoid missing transitions happening while the interrupts are masked.
SM6115 support is added to smd-rpm and rpmpd.
The Qualcomm SCM firmware driver is once again made possible to compile
and load as a kernel module.
An out-of-bounds error related to the cooling devices of the AOSS driver
is corrected. The binding is converted to YAML and a generic compatible
is introduced to reduce the driver churn.
The GENI wrapper gains a helper function used in I2C and SPI for
switching the serial engine hardware to use the wrapper's DMA-engine.
Lastly it contains a number of cleanups and smaller fixes for rpmhpd,
socinfo, CPR, mdt_loader and the GENI DT binding.
-----BEGIN PGP SIGNATURE-----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=88qN
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=dS58
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.15
This fixes the "shared memory state machine" (SMSM) interrupt logic to
avoid missing transitions happening while the interrupts are masked.
SM6115 support is added to smd-rpm and rpmpd.
The Qualcomm SCM firmware driver is once again made possible to compile
and load as a kernel module.
An out-of-bounds error related to the cooling devices of the AOSS driver
is corrected. The binding is converted to YAML and a generic compatible
is introduced to reduce the driver churn.
The GENI wrapper gains a helper function used in I2C and SPI for
switching the serial engine hardware to use the wrapper's DMA-engine.
Lastly it contains a number of cleanups and smaller fixes for rpmhpd,
socinfo, CPR, mdt_loader and the GENI DT binding.
* tag 'qcom-drivers-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: smsm: Fix missed interrupts if state changes while masked
soc: qcom: smsm: Implement support for get_irqchip_state
soc: qcom: mdt_loader: be more informative on errors
dt-bindings: qcom: geni-se: document iommus
soc: qcom: smd-rpm: Add SM6115 compatible
soc: qcom: geni: Add support for gpi dma
soc: qcom: geni: move GENI_IF_DISABLE_RO to common header
PM: AVS: qcom-cpr: Use nvmem_cell_read_variable_le_u32()
drivers: soc: qcom: rpmpd: Add SM6115 RPM Power Domains
dt-bindings: power: rpmpd: Add SM6115 to rpmpd binding
dt-bindings: soc: qcom: smd-rpm: Add SM6115 compatible
soc: qcom: aoss: Fix the out of bound usage of cooling_devs
firmware: qcom_scm: Allow qcom_scm driver to be loadable as a permenent module
soc: qcom: socinfo: Don't print anything if nothing found
soc: qcom: rpmhpd: Use corner in power_off
soc: qcom: aoss: Add generic compatible
dt-bindings: soc: qcom: aoss: Convert to YAML
dt-bindings: soc: qcom: aoss: Add SC8180X and generic compatible
firmware: qcom_scm: remove a duplicative condition
firmware: qcom_scm: Mark string array const
Link: https://lore.kernel.org/r/20210816214840.581244-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New machines
* Facebook's Cloudripper
* Facebook's Elbert
* Facebook's Fuji
All three carry the description of "Facebook's next generation switch
platform with an AST2600 BMC integrated for health monitoring
purpose."
They share a 128 MB SPI NOR flash layout that is also used by some
older platforms.
* Inspur's NF5280M6, an x86 platform server with an AST2500-based BMC
- SGPIO updates including AST2600 support
- GPIO descriptions for the IBM AST2600 machines
- Pinctrl fix
- Updates to Facebook's AST2500 based machines
-----BEGIN PGP SIGNATURE-----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=GIHt
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Y4SA
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.15-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt
ASPEED device tree updates for 5.15
- New machines
* Facebook's Cloudripper
* Facebook's Elbert
* Facebook's Fuji
All three carry the description of "Facebook's next generation switch
platform with an AST2600 BMC integrated for health monitoring
purpose."
They share a 128 MB SPI NOR flash layout that is also used by some
older platforms.
* Inspur's NF5280M6, an x86 platform server with an AST2500-based BMC
- SGPIO updates including AST2600 support
- GPIO descriptions for the IBM AST2600 machines
- Pinctrl fix
- Updates to Facebook's AST2500 based machines
* tag 'aspeed-5.15-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (23 commits)
ARM: dts: aspeed: p10bmc: Add power control pins
ARM: dts: aspeed: cloudripper: Add comments for "mdio1"
ARM: dts: aspeed: minipack: Update flash partition table
ARM: dts: aspeed: Add Facebook Fuji (AST2600) BMC
ARM: dts: aspeed: Add Facebook Elbert (AST2600) BMC
ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMC
ARM: dts: aspeed: Common dtsi for Facebook AST2600 Network BMCs
ARM: dts: aspeed: wedge400: Use common flash layout
ARM: dts: Add Facebook BMC 128MB flash layout
ARM: dts: aspeed-g5: Remove ngpios from sgpio node.
ARM: dts: aspeed-g6: Add SGPIO node.
dt-bindings: aspeed-sgpio: Add ast2600 sgpio
dt-bindings: aspeed-sgpio: Convert txt bindings to yaml.
ARM: dts: aspeed: ast2500evb: Enable built in RTC
ARM: dts: aspeed: tacoma: Add TPM reset GPIO
ARM: dts: rainier, everest: Add TPM reset GPIO
ARM: dts: aspeed: wedge100: Enable ADC channels
ARM: dts: aspeed: galaxy100: Remove redundant ADC device
ARM: dts: aspeed: wedge40: Remove redundant ADC device
ARM: dts: aspeed: Enable ADC in Facebook AST2400 common dtsi
...
Link: https://lore.kernel.org/r/CACPK8XdWRBb9cuDWGQPfK8R8TsZuydJQHsL4_e2w=HvCKAMogg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SDM660 and SDM630 was concluded to be similar enough that they should be
merged, and the derivative SDM636 was added to the bunch. The combined
platform gained support for GPU, DMA, I2C, IMEM, display, power-domains,
SDHCI, thermal, USB, interconnects, VADC, WLED and audio remoteproc. The
Sony Xperia "Ganges" platform was similarly merged with "Nile", got
cleaned up and gained touchscreen, USB, volume keys and uSD support.
IPQ6018 gains USB2 and PCIe support and a few minor fixes. IPQ8074
gains SCM, PRNG and Crypto support and a DT style update of the PCIe
nodes.
MSM8916 gains Coresight STM support. The Xiaomi Redmi 2 is introduced,
with touchscreen, notification LED and IMU support. MSM8996 gains
support for GPU cooling and v3.0 of the SoC, which is used to introduce
support for the Sony Xperia X Performance, XZ and XZs phones.
SC7180 finally gains DisplayPort support and LPASS is updated
accordingly. A number of fixes are introduced and with the newly
introduced DRM aux bus in place Trogdor's panel is moved under the eDP
bridge. SC7280 gained USB, eMMC, SD-card, QFPROM and IPA support, the
new IDP2 board was added.
SM6126 (aka Snapdragon 665) was introduced, together with the Sony
Xperia 10II phone with support for framebuffer, USB, eMMC and volume
keys.
SM8150 gained inline crypto support for UFS enabled, CPU opp-tables was
introduced to scale DDR and L3 frequencies and SPI nodes where added, in
addition to a number of smaller fixes.
SM8250 gained a number of minor fixes and had its serial engines wired
up to use the GENI wrappers' DMA engines.
SM8350 had wakeup-parent defined for the TLMM gpio node and I2C13 was
introduced.
SDM845 display clocks was corrected and Lenovo Yoga C630 got IPA enabled
and now has working LTE connectivity.
Additionally a number of minor fixes throughout to correct DT validation
warnings.
Lastly v5.14-rc3 is merge in to resolve the merge conflicts caused by
the USB maintainer deciding to fix a regression in his tree.
-----BEGIN PGP SIGNATURE-----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=GGZW
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=lQQn
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 updates for v5.15
SDM660 and SDM630 was concluded to be similar enough that they should be
merged, and the derivative SDM636 was added to the bunch. The combined
platform gained support for GPU, DMA, I2C, IMEM, display, power-domains,
SDHCI, thermal, USB, interconnects, VADC, WLED and audio remoteproc. The
Sony Xperia "Ganges" platform was similarly merged with "Nile", got
cleaned up and gained touchscreen, USB, volume keys and uSD support.
IPQ6018 gains USB2 and PCIe support and a few minor fixes. IPQ8074
gains SCM, PRNG and Crypto support and a DT style update of the PCIe
nodes.
MSM8916 gains Coresight STM support. The Xiaomi Redmi 2 is introduced,
with touchscreen, notification LED and IMU support. MSM8996 gains
support for GPU cooling and v3.0 of the SoC, which is used to introduce
support for the Sony Xperia X Performance, XZ and XZs phones.
SC7180 finally gains DisplayPort support and LPASS is updated
accordingly. A number of fixes are introduced and with the newly
introduced DRM aux bus in place Trogdor's panel is moved under the eDP
bridge. SC7280 gained USB, eMMC, SD-card, QFPROM and IPA support, the
new IDP2 board was added.
SM6126 (aka Snapdragon 665) was introduced, together with the Sony
Xperia 10II phone with support for framebuffer, USB, eMMC and volume
keys.
SM8150 gained inline crypto support for UFS enabled, CPU opp-tables was
introduced to scale DDR and L3 frequencies and SPI nodes where added, in
addition to a number of smaller fixes.
SM8250 gained a number of minor fixes and had its serial engines wired
up to use the GENI wrappers' DMA engines.
SM8350 had wakeup-parent defined for the TLMM gpio node and I2C13 was
introduced.
SDM845 display clocks was corrected and Lenovo Yoga C630 got IPA enabled
and now has working LTE connectivity.
Additionally a number of minor fixes throughout to correct DT validation
warnings.
Lastly v5.14-rc3 is merge in to resolve the merge conflicts caused by
the USB maintainer deciding to fix a regression in his tree.
* tag 'qcom-arm64-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (114 commits)
arm64: dts: qcom: sm8250: assign DSI clock source parents
arm64: dts: qcom: sdm845-mtp: assign DSI clock source parents
arm64: dts: qcom: sdm845: assign DSI clock source parents
arm64: dts: qcom: sc7180: assign DSI clock source parents
arm64: dts: qcom: sc7280-idp: Add device tree files for IDP2
dt-bindings: arm: qcom: Document qcom,sc7280-idp2 board
arm64: dts: qcom: sm8350: fix IPA interconnects
arm64: dts: qcom: sc7180: define ipa_fw_mem node
arm64: dts: qcom: sc7280: enable IPA for sc7280-idp
arm64: dts: qcom: sc7280: add IPA information
arm64: dts: qcom: sc7180-trogdor: Move panel under the bridge chip
arm64: dts: qcom: ipq8074: add PRNG node
arm64: dts: qcom: ipq8074: add crypto nodes
arm64: dts: qcom: sm8350: add qupv3_id_1/i2c13 nodes
arm64: dts: qcom: ipq6018: Add pcie support
arm64: dts: qcom: pm8150b: Add DTS node for PMIC VBUS booster
arm64: dts: qcom: sm8150: add SPI nodes
arm64: dts: qcom: msm8916: Enable CoreSight STM component
arm64: dts: qcom: sc7280: Add qfprom node
arm64: dts: qcom: sc7280: Fixup the cpufreq node
...
Link: https://lore.kernel.org/r/20210816231223.586597-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Samsung Exynos SoC SATA bindings are not implemented in the kernel,
not used and superseded by generic
Documentation/devicetree/bindings/ata/ahci-platform.txt bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210811083859.28234-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
This adds a device tree binding for the Winbond W83781D and its
sibling HW monitoring ICs. This is used in for example the Freecom
FSG-3 router/NAS.
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210729230543.2853485-1-linus.walleij@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
These are supported by the rtc-rx8025 module. RX-8025
also has support in ds1307 due to compatible time registers.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210709044518.28769-3-matt@traverse.com.au
1. Fix number of pins in one GPIO pin bank.
2. Add support for Exynos850 SoC (Exynos3830).
-----BEGIN PGP SIGNATURE-----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=bMSO
-----END PGP SIGNATURE-----
Merge tag 'samsung-pinctrl-5.15' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v5.15
1. Fix number of pins in one GPIO pin bank.
2. Add support for Exynos850 SoC (Exynos3830).
A small pull request to pick up a few new drivers and some cleanup
and fix patches.
New device support
* ad5110 non-volatile digital potentiometer
- New driver
* renesas rzl/gl2 12-bit / 8 channel ADC block
- New driver and bindings
Minor or late breaking fixes and cleanups
* ltc2983
- Fix a false assumption of initial interrupt during probe().
* hp03
- Use devm_* to simplify probe and allow the remove function to be dropped.
* rockchip_saradc
- Use a regulator notifier to reduce overheads of querying the scale.
-----BEGIN PGP SIGNATURE-----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=d/Fm
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.15b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
2nd set of new IIO device support and cleanups for the 5.15 cycle.
A small pull request to pick up a few new drivers and some cleanup
and fix patches.
New device support
* ad5110 non-volatile digital potentiometer
- New driver
* renesas rzl/gl2 12-bit / 8 channel ADC block
- New driver and bindings
Minor or late breaking fixes and cleanups
* ltc2983
- Fix a false assumption of initial interrupt during probe().
* hp03
- Use devm_* to simplify probe and allow the remove function to be dropped.
* rockchip_saradc
- Use a regulator notifier to reduce overheads of querying the scale.
* tag 'iio-for-5.15b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: adc: Add driver for Renesas RZ/G2L A/D converter
dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L A/D converter
iio: pressure: hp03: update device probe to register with devm functions
iio: adc: rockchip_saradc: add voltage notifier so get referenced voltage once at probe
iio: ltc2983: fix device probe
iio: potentiometer: Add driver support for AD5110
dt-bindings: iio: potentiometer: Add AD5110 in trivial-devices
Add bindings for the Rockchip serial flash controller. New device
specific parameter of rockchip,sfc-no-dma included in documentation.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210812134546.31340-2-jon.lin@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support type switch by pericfg register between USB3, PCIe,
SATA, SGMII, this is used to replace the way through efuse or
jumper.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1629191987-20774-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This introduces the MSM8226 platform and an initial dts for the Samsung
Galaxy S III Neo phone.
MSM8974 gains another UART and this is used to enable Bluetooth on the
Sony Xperia Z2 Tablet. Samsung Galaxy S5 gains regulator definitions for
audio and modem remoteprocs, effectively enabling these.
DSI clocks on APQ8064 are updates as the old legacy clock names are no
longer supported by the driver. And IPQ806x GMAC nodes gains AHB resets
wired up.
Lastly APQ8060 is converted to a SPDX header and the ethernet node is
updates in accordance with the binding.
-----BEGIN PGP SIGNATURE-----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=JynD
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=zDwv
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm dts updates for v5.15
This introduces the MSM8226 platform and an initial dts for the Samsung
Galaxy S III Neo phone.
MSM8974 gains another UART and this is used to enable Bluetooth on the
Sony Xperia Z2 Tablet. Samsung Galaxy S5 gains regulator definitions for
audio and modem remoteprocs, effectively enabling these.
DSI clocks on APQ8064 are updates as the old legacy clock names are no
longer supported by the driver. And IPQ806x GMAC nodes gains AHB resets
wired up.
Lastly APQ8060 is converted to a SPDX header and the ethernet node is
updates in accordance with the binding.
* tag 'qcom-dts-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: add ahb reset to ipq806x-gmac
ARM: dts: qcom: Fix up APQ8060 DragonBoard license
ARM: dts: qcom: msm8974: castor: Add Bluetooth-related nodes
ARM: dts: qcom: msm8974: Add blsp2_uart7 for bluetooth on sirius
ARM: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo phone
dt-bindings: arm: qcom: Document MSM8226 SoC binding
ARM: dts: qcom: Add support for MSM8226 SoC
ARM: dts: qcom: apq8060: Correct Ethernet node name and drop bogus irq property
ARM: dts: qcom: apq8064: correct clock names
ARM: dts: qcom: msm8974-klte: Enable remote processors
Link: https://lore.kernel.org/r/20210816211957.579365-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is the main pull for v5.15, after the early pull request with
drm/scheduler conversion:
* New a6xx GPU support: a680 and 7c3
* dsi: 7nm phi, sc7280 support, test pattern generator support
* mdp4 fixes for older hw like the nexus7
* displayport fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs_tyanTeDGMH1X+Uf4wdyy7jYj-CinGXXVETiYOESahw@mail.gmail.com
1. MT8133 AAL support, adjust rdma fifo threshold formula.
2. Implement mmap as GEM object function.
3. Add support for MT8167.
4. Test component initialization earlier in the function mtk_drm_crtc_create.
5. CMDQ refinement.
-----BEGIN PGP SIGNATURE-----
iQJMBAABCgA2FiEEACwLKSDmq+9RDv5P4cpzo8lZTiQFAmEa8V0YHGNodW5rdWFu
Zy5odUBrZXJuZWwub3JnAAoJEOHKc6PJWU4ko88P/jB880d6Pe5Fm23BvpOkUl7o
gmlMgOc184ghUzDmCQrRE029ZgXqucCBW0onLdgyrkEXFA32/XmKbrLibUigsV8D
sMoLrJToEKO+YM033xZMwuVe37owLdqsJkmLttQhZf3PSN/FJnKksQmRe6ShV9Dv
5Ls292U7F3NrWnhFwX7+XQpp/oVad1m6z8bTKd//EYpAyMHT1vVjixE4SJJddB5g
CLKFUlE8Vg9qoCttFnRQtOYqSB2u+5KZilY7Av1/gXkjfpsMIkMFLKtjvewzs3fG
LLSA9MV9Yr9YylRaR7YVlpM0gZfZpi8TmIiQdnqzANRjcjGvLHCXhNuur6URYWkL
k/2LWIiLSDIiSISfCbBxhFQCpHWnAYSXnRdqD48vZfy+cTOGmhdYyBS9+JD9fN7H
HbPRcjp61KMdV65uS4QKnWIihJRiHtDRa1mESKf01hlzQEsYd0JKERNXbc9Zjm06
DibfHz+HlRPZawO0+WDJmCqFB6g0VZzXOPzrTxxQvWFoYQTbCKst3NI7mCHblkNq
FaR1IZ8pYulNg/FdjRBROehXV4Jkg1M+Sbh0ixhXpcDfyG/OGcIfoPrFuA4iTnhs
lUT2T4fSv4xCoklRTCbpKtittFPR+LSp8TXW2eml8+p+Zc67EZj5aQ/469h57Bum
nGitW8UfYpauo1/dNaD3
=OMls
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-5.15' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 5.15
1. MT8133 AAL support, adjust rdma fifo threshold formula.
2. Implement mmap as GEM object function.
3. Add support for MT8167.
4. Test component initialization earlier in the function mtk_drm_crtc_create.
5. CMDQ refinement.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210816232427.13368-1-chunkuang.hu@kernel.org
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmD95yIeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGqp0H/j/xHL20EHaUJOaV
iJjnfGyjtnkLC5FCoV/q/v9sFuSW2p4W1nyF8/eIgVKObef94Mg4/xxaHQrWIM56
cbzK9aIcD9InAuImJ6lju4fqjNmFrt2x7mhfzjPKqmhfINfZ5CohpLFN5XdOwzYC
l+ZgmUUl7GLDAND2M6rtkc7AOk4qTyAySDvvPFELE/uNgV4EKaENSIWofHhEzW5v
Yk+4agawaFTfa6H9+uMVYZBOcEKwheQ0E2tcOJvHJT8Mwm8MFoC/B7fLY5zxIdN2
7A7r/7qbSQmSDSjOgwKS4ZOjom0xGSD+V+596SzET6jkbahR2HJ/mrFvmD7GNEoW
OWJPjzI=
=vzIM
-----END PGP SIGNATURE-----
Merge tag 'v5.14-rc3' into arm64-for-5.15
The USB maintainer felt the strong need to push '1f958f3dff42
("Revert "arm64: dts: qcom: Harmonize DWC USB3 DT nodes name"")'
through the usb tree, so merge v5.14-rc3 to resolve the resulting merge
conflicts.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In the past we only need on clock which name "pclk" for a gpio controller.
In the new version gpio controller, there add some register to change
debounce clock dynamic, so the dt node needs to add the second clock, we
call it "dbclk".
The clock property need 2 items on some rockchip chips such as RK3568
SoCs.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210816011948.1118959-5-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
SMB347 can supply power to USB VBUS, which is required by OTG-cable
devices that want to switch USB port into the host mode. Add USB VBUS
regulator properties.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The BeagleV Starlight v0.9 board[1] doesn't have the IRQB line routed to
the SoC, but it is still useful to be able to reach the PMIC over I2C
for the other functionality it provides such as GPIOs and regulator
settings.
[1] https://github.com/beagleboard/beaglev-starlight
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This converts the tps65086.txt binding description to YAML schema so
dts files can be verified automatically.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The Maxim 17042-family of fuel gauges are often embedded in other Maxim
chips, e.g. in Maxim 77693 which is a companion power management IC.
In such designs there might be actually two interrupts:
- INTB signaling change from charger, flash or MUIC,
- ALERT signaling change from fuel gauge.
Describe the interrupt in bindings to make it clear it is about the fuel
gauge ALERT interrupt, not the INT.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The new added properties resource "reg" is for configuring
ethernet LDO in the IPQ5018 chipset, the property "clocks"
is for configuring the MDIO clock source frequency.
Signed-off-by: Luo Jie <luoj@codeaurora.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The pcie-kirin driver doesn't declare a hisilicon,kirin-pcie.
Also, remove the useless comment after the description, as other
compat will be supported by the same driver in the future.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/3e3e29a88f8e71eb228edf33d70cbe70db431408.1627965261.git.mchehab+huawei@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Add AD5110, a Nonvolatile Digital Potentiometer into
trivial-devices.yaml.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mugilraj Dhavachelvan <dmugil2000@gmail.com>
Link: https://lore.kernel.org/r/20210814175607.48399-2-dmugil2000@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Usual mix of cleanups and new device support.
Counter
======
Cleanups and refactoring:
* treewide
- Ensure attempts to set invalid modes result in -EINVAL return.
- Rename counter_count_function to counter_function as the middle count
is redundant.
- Standardize error returns when limits are exceeded.
* 104-quad:
- Document the lock.
- Return an error if attempt to set the ceiling value in a mode that
doesn't support it.
* intel-qep
- Drop unused bitops.h include
IIO
===
New device support
* bma255
- Add support fo the bosch,bmc156_accel which oddly only exposes the INT2
interrupt pin and not INT1. Patch set includes enabling use of INT2.
* ingenic_adc
- Add support for JZ4760 and similar and update bindings
- Add support for JZ4760B and update bindings
* rockchip_saradc
- Add support for rk3568 ADC (separate channel array as more channels)
* sgp40 gas sensor used to measure air quality
- New driver including binding and ABI documentation.
Bindings
--------
* Add missing bindings for many DACs where the binding was effectively
implicit due to fallback probe methods in I2C and SPI.
adi,ad5064
adi,ad5360
adi,ad5380
adi,ad5421
adi,ad5449
adi,ad5504
adi,ad5624r
adi,ad5686 / adi,ad5696
adi,ad5761
adi,ad5764
adi,ad5791
adi,ad8801
capella,cm3323 (also add explicit of_device_id table)
microchip,mcp4922
* bosch,bma255
- Interrupt type in example was opposite of what the device expects.
It's possible that a particular board had an inverter, but we
definitely don't want the example to suggest this would be normal.
- Add interrupt-names to allow for cases where only INT2 is connected.
- Sort compatibles
- Merge in very similar bosch,bma180 binding.
New feature
-----------
* Devices only allowed to provide either extended_name or a label for given
channel. If extend_name is used (generally discouraged but can't be
removed as it would be a userspaece ABI change), then the label sysfs
attribute will provide the extended_name. This allows some userspace
parser simplications and hardening.
* hid-sensors-pres
- Add a timestamp channel (either from hardware, or locally filled).
* vcnl3020
- Add periodic sensor mode used to provide IIO events.
Cleanups / minor fixes
----------------------
* core/buffers
- Avoid unnecessary zeroing of bitmaps that are immediately overwritten.
- Move a sanity check earlier to simplify error path.
* Quite a few cases of refactors to use devm_* for all of probe and drop
remove
- adjd_s311
- adxl345
- bma220
- da280
- dmard10
- ds311
- max5481
- max5821
- rfd77402
- tcs3414
- tmp006
* ad5624r
- Fix incorrect handling of a regulator that was preventing use of
internal regulators.
* adjd_s311
- Allocate a buffer as part of iio_priv() structure as maximum size
is small enough, no significant advantage in making it flexible sized.
* bma220
- Make handling of suspend and resume closer to the probe() wrt to the
rather odd interface, that suspend mode is entered by reading a register.
* ep93xx
- Prepare clock before using (part of conversion to CCF)
* fsl-imx25-gcq
- Use local device pointer.
- Adjust handling of platform_get_irq() to not check for 0 as an error.
The function is documented as never returning it.
* hid-sensors
- Use devm_kmemdup() consistently across all drivers to simplify channel
structure allocation management.
* meson-saradc
- Drop BL30 integration on G12A and newer SoCs as not used.
- Whitespace fixes.
* mpu6050
- Add per device type startup times. This avoids an issue with having
to dsicard initial data from gyroscopes when they were still stabilizing.
* rfd77402
- Change from passing private data, to passing i2c_client where only
that is needed, reducing back and forth in pm functions.
* si1145
- Drop pointless continue
* st-sensors
- Cleanup of includes to remove unused and add missing headers that are used.
- Use some devm functions to simplify probe() and remove() - gets us part way
towards a fully device managed driver.
* sx9310
- Switch from of to generic properties to enable ACPI bindings.
* vcnl3020
- Add DMA safe buffer for bulk transfers.
- Drop use of iio_claim_direct() in a driver that has no mode changes.
A local lock is more appropriate.
-----BEGIN PGP SIGNATURE-----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=cDKa
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.15a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new IIO and counter device support, cleanups and features for 5.15
Usual mix of cleanups and new device support.
Counter
======
Cleanups and refactoring:
* treewide
- Ensure attempts to set invalid modes result in -EINVAL return.
- Rename counter_count_function to counter_function as the middle count
is redundant.
- Standardize error returns when limits are exceeded.
* 104-quad:
- Document the lock.
- Return an error if attempt to set the ceiling value in a mode that
doesn't support it.
* intel-qep
- Drop unused bitops.h include
IIO
===
New device support
* bma255
- Add support fo the bosch,bmc156_accel which oddly only exposes the INT2
interrupt pin and not INT1. Patch set includes enabling use of INT2.
* ingenic_adc
- Add support for JZ4760 and similar and update bindings
- Add support for JZ4760B and update bindings
* rockchip_saradc
- Add support for rk3568 ADC (separate channel array as more channels)
* sgp40 gas sensor used to measure air quality
- New driver including binding and ABI documentation.
Bindings
--------
* Add missing bindings for many DACs where the binding was effectively
implicit due to fallback probe methods in I2C and SPI.
adi,ad5064
adi,ad5360
adi,ad5380
adi,ad5421
adi,ad5449
adi,ad5504
adi,ad5624r
adi,ad5686 / adi,ad5696
adi,ad5761
adi,ad5764
adi,ad5791
adi,ad8801
capella,cm3323 (also add explicit of_device_id table)
microchip,mcp4922
* bosch,bma255
- Interrupt type in example was opposite of what the device expects.
It's possible that a particular board had an inverter, but we
definitely don't want the example to suggest this would be normal.
- Add interrupt-names to allow for cases where only INT2 is connected.
- Sort compatibles
- Merge in very similar bosch,bma180 binding.
New feature
-----------
* Devices only allowed to provide either extended_name or a label for given
channel. If extend_name is used (generally discouraged but can't be
removed as it would be a userspaece ABI change), then the label sysfs
attribute will provide the extended_name. This allows some userspace
parser simplications and hardening.
* hid-sensors-pres
- Add a timestamp channel (either from hardware, or locally filled).
* vcnl3020
- Add periodic sensor mode used to provide IIO events.
Cleanups / minor fixes
----------------------
* core/buffers
- Avoid unnecessary zeroing of bitmaps that are immediately overwritten.
- Move a sanity check earlier to simplify error path.
* Quite a few cases of refactors to use devm_* for all of probe and drop
remove
- adjd_s311
- adxl345
- bma220
- da280
- dmard10
- ds311
- max5481
- max5821
- rfd77402
- tcs3414
- tmp006
* ad5624r
- Fix incorrect handling of a regulator that was preventing use of
internal regulators.
* adjd_s311
- Allocate a buffer as part of iio_priv() structure as maximum size
is small enough, no significant advantage in making it flexible sized.
* bma220
- Make handling of suspend and resume closer to the probe() wrt to the
rather odd interface, that suspend mode is entered by reading a register.
* ep93xx
- Prepare clock before using (part of conversion to CCF)
* fsl-imx25-gcq
- Use local device pointer.
- Adjust handling of platform_get_irq() to not check for 0 as an error.
The function is documented as never returning it.
* hid-sensors
- Use devm_kmemdup() consistently across all drivers to simplify channel
structure allocation management.
* meson-saradc
- Drop BL30 integration on G12A and newer SoCs as not used.
- Whitespace fixes.
* mpu6050
- Add per device type startup times. This avoids an issue with having
to dsicard initial data from gyroscopes when they were still stabilizing.
* rfd77402
- Change from passing private data, to passing i2c_client where only
that is needed, reducing back and forth in pm functions.
* si1145
- Drop pointless continue
* st-sensors
- Cleanup of includes to remove unused and add missing headers that are used.
- Use some devm functions to simplify probe() and remove() - gets us part way
towards a fully device managed driver.
* sx9310
- Switch from of to generic properties to enable ACPI bindings.
* vcnl3020
- Add DMA safe buffer for bulk transfers.
- Drop use of iio_claim_direct() in a driver that has no mode changes.
A local lock is more appropriate.
* tag 'iio-for-5.15a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (77 commits)
counter: 104-quad-8: Describe member 'lock' in 'quad8'
iio: hid-sensor-press: Add timestamp channel
counter: Rename counter_count_function to counter_function
counter: Rename counter_signal_value to counter_signal_level
counter: Standardize to ERANGE for limit exceeded errors
counter: Return error code on invalid modes
counter: 104-quad-8: Return error when invalid mode during ceiling_write
iio: accel: bmc150: Add support for BMC156
iio: accel: bmc150: Make it possible to configure INT2 instead of INT1
dt-bindings: iio: accel: bma255: Add bosch,bmc156_accel
dt-bindings: iio: accel: bma255: Add interrupt-names
iio: light: cm3323: Add of_device_id table
dt-bindings: Add bindings for Capella cm3323 Ambient Light Sensor
iio: chemical: Add driver support for sgp40
dt-bindings: iio: chemical: Add trivial DT binding for sgp40
iio: ep93xx: Prepare clock before using it
iio: adc: fsl-imx25-gcq: adjust irq check to match docs and simplify code
iio: dac: max5821: convert device register to device managed function
dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
iio/adc: ingenic: add JZ4760B support to the sadc driver
...
Even though the previous binding made it a required child node, the
implementation in Linux never made it mandatory and just ignored thermal
zones without trip points.
This was even effectively encouraged, since the thermal core wouldn't
allow a thermal sensor to probe without a thermal zone.
In the case where you had a thermal device that had multiple sensors but
with enough knowledge to provide trip points for only a few of them,
this meant that the only way to make that driver probe was to provide a
thermal zone without the trips node required by the binding.
This obviously led to a fair number of device trees doing exactly that,
making the initial binding requirement ineffective.
Let's make it clear by dropping that requirement.
Cc: Amit Kucheria <amitk@kernel.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-pm@vger.kernel.org
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210721140424.725744-34-maxime@cerno.tech
This adds a battery-chemistry property and bindings for the different
"technologies" that are used in Linux. More types can be added.
This is needed to convert the custom ST-Ericsson AB8500 battery
properties over to the generic battery bindings.
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add binding for the RK3568 along a SoC-specific description of
voltage supplies.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
[add soc-specific section]
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210805120107.27007-2-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Document the compatible for the Ten64 board which will
be included as freescale/fsl-ls1088a-ten64.dtb in arm64.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Traverse Technologies is a designer and manufacturer
of networking appliances.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Add pin control and GPIO support for the new RZ/G2L SoC.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYRZFUQAKCRCKwlD9ZEnx
cCRjAP0U1x4/IFI9ht4WL2t2FKMy4TreYcOxeLVSivXC91r19wD/WpjASyA/Dnlj
Y4hJRyW0dFv7Uab0dqzLAO+WtABM0gg=
=3MMW
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v5.15-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v5.15 (take two)
- Add pin control and GPIO support for the new RZ/G2L SoC.
This immutable branch introduces the MT6360 charger driver,
which requires a new linear range helper.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
-----BEGIN PGP SIGNATURE-----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=60NT
-----END PGP SIGNATURE-----
Merge tag 'ib-mt6360-for-5.15-signed' into psy-next
Immutable branch between regulator and power-supply for for 5.15
This immutable branch introduces the MT6360 charger driver,
which requires a new linear range helper.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Add bindings document for Charger support on MT6360 PMIC
Signed-off-by: Gene Chen <gene_chen@richtek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Clock property hasn't been documented in binding document but it is used
for quite a long time where clock was specified by commit 9c8a47b484
("arm64: dts: xilinx: Add the clock nodes for zynqmp").
Link: https://lore.kernel.org/r/67aa2c189337181bb2d7721fb616db5640587d2a.1624618100.git.michal.simek@xilinx.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
The DMAC on RZ/G2L has specific slave channel configuration
parameters for SSI.
This patch updates the dmas description and example node to include
the encoded slave channel configuration.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210813091156.10700-3-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set "pd-disable" property if the Type-C connector has no power
delivery support.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210804081917.3390341-2-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both of these consoles use the exact same two registers, even at the
same address, but the Wii U has eight banks of 128 bytes memory while
the Wii only has one, hence the two compatible strings.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210810153036.1494-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some newer SoCs, the interconnect between IPA and SoC internal
memory (imem) is not used. Update the binding to indicate that
having just the memory and config interconnects is another allowed
configuration.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210811141802.2635424-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Add regulator for MFG_ASYNC power domain
- Use alias for MMC to get fixed numbers
MT8183:
- Use alia for MMC to get fixed numbers
- Add optional event number for Global Comman Engine
-----BEGIN PGP SIGNATURE-----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=RXt8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=xVao
-----END PGP SIGNATURE-----
Merge tag 'v5.14-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
MT8173:
- Add regulator for MFG_ASYNC power domain
- Use alias for MMC to get fixed numbers
MT8183:
- Use alia for MMC to get fixed numbers
- Add optional event number for Global Comman Engine
* tag 'v5.14-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
dt-bindings: mediatek: Add optional mediatek,gce-events property
arm64: dts: mt8183: add mediatek,gce-events in mutex
arm64: dts: mediatek: mt8173: Add domain supply for mfg_async
arm64: dts: mt8173: elm: Use aliases to mmc nodes
arm64: dts: mt8183: kukui: Use aliases to mmc nodes
Link: https://lore.kernel.org/r/26c4026a-9f26-d5a3-c30f-439120a4eaa0@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The bulk of the addition this time is mainly refactoring to add support
for Virtio transport for SCMI and the addition of the support itself.
The refactoring includes allowing transport specific init/exit calls,
making each transport as compile time configurable, supporting
monotonically increasing tokens instead of using the next available
free buffer index as the token for scmi messages which eases handling
concurrent and out-of-order messages which is a must have for virtio
transport.
Virtio support itself is conformant to the virtio SCMI device spec [1].
Virtio device id 32 has been reserved for the SCMI device [2].
Other than the virtio support, there is one bug fix in the probe failure
clean up path.
[1] https://github.com/oasis-tcs/virtio-spec/blob/master/virtio-scmi.tex
[2] https://www.oasis-open.org/committees/ballot.php?id=3496
-----BEGIN PGP SIGNATURE-----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=CR6R
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=H7PM
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
SCMI Updates for v5.15
The bulk of the addition this time is mainly refactoring to add support
for Virtio transport for SCMI and the addition of the support itself.
The refactoring includes allowing transport specific init/exit calls,
making each transport as compile time configurable, supporting
monotonically increasing tokens instead of using the next available
free buffer index as the token for scmi messages which eases handling
concurrent and out-of-order messages which is a must have for virtio
transport.
Virtio support itself is conformant to the virtio SCMI device spec [1].
Virtio device id 32 has been reserved for the SCMI device [2].
Other than the virtio support, there is one bug fix in the probe failure
clean up path.
[1] https://github.com/oasis-tcs/virtio-spec/blob/master/virtio-scmi.tex
[2] https://www.oasis-open.org/committees/ballot.php?id=3496
* tag 'scmi-updates-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Use WARN_ON() to check configured transports
firmware: arm_scmi: Fix boolconv.cocci warnings
firmware: arm_scmi: Free mailbox channels if probe fails
firmware: arm_scmi: Add virtio transport
firmware: arm_scmi: Add priv parameter to scmi_rx_callback
dt-bindings: arm: Add virtio transport for SCMI
firmware: arm_scmi: Add optional link_supplier() transport op
firmware: arm_scmi: Add message passing abstractions for transports
firmware: arm_scmi: Add method to override max message number
firmware: arm_scmi: Make shmem support optional for transports
firmware: arm_scmi: Make SCMI transports configurable
firmware: arm_scmi: Make polling mode optional
firmware: arm_scmi: Make .clear_channel optional
firmware: arm_scmi: Handle concurrent and out-of-order messages
firmware: arm_scmi: Introduce monotonically increasing tokens
firmware: arm_scmi: Add optional transport_init/exit support
firmware: arm_scmi: Remove scmi_dump_header_dbg() helper
firmware: arm_scmi: Add support for type handling in common functions
Link: https://lore.kernel.org/r/20210811075743.707961-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It includes all required changes for handling i.MX6/7 eCSPI errata
ERR009165, which causes FIFO transfer to be sent twice in DMA mode.
Both SPI and DMA maintainers agree to merge it through arm-soc tree.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmEQ1REUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7w5ggAhpcDrpO7eimqPmkr/8FxI6WLGh/t
OjsAM+WVlAlHMPRC53r94Ot8q1XbenkA8Cr3hA88cJS+Hx2WunyXL4szUO+Bh/A5
o/ZpMPbitea7wQRVJkVX0AsBrvJ4hj+MQmlk31Kd2Jk7Ptpo3hoPb1J7Lg2Fou3K
g6nAELMSxa8+/1xt2AkNJppnDp6eRcOsc3yqO+7SsTGlr2JzB6SN21yvOzLWd8+Y
4v3J3a84G/w6vUlSa5mloIbGOOkyxEYitLBPrgjc5AvPjJEc0m/QlArmnuaGn1j+
LXfPFNDIlG5EIvF5HzrXMl6z8E4pGx7hWgDG/4SDWvYcbhlggtLnmra4Tg==
=bmM2
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=iV7U
-----END PGP SIGNATURE-----
Merge tag 'imx-ecspi-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX eCSPI errata handling for 5.15:
It includes all required changes for handling i.MX6/7 eCSPI errata
ERR009165, which causes FIFO transfer to be sent twice in DMA mode.
Both SPI and DMA maintainers agree to merge it through arm-soc tree.
* tag 'imx-ecspi-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dmaengine: imx-sdma: add terminated list for freed descriptor in worker
dmaengine: imx-sdma: add uart rom script
dma: imx-sdma: add i.mx6ul compatible name
dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
spi: imx: remove ERR009165 workaround on i.mx6ul
spi: imx: fix ERR009165
dmaengine: imx-sdma: add mcu_2_ecspi script
dmaengine: dma: imx-sdma: add fw_loaded and is_ram_script
dmaengine: imx-sdma: remove duplicated sdma_load_context
Revert "dmaengine: imx-sdma: refine to load context only once"
Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
Link: https://lore.kernel.org/r/20210809071838.GF30984@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Jetson TX2 NX Developer Kit is the same form factor as Jetson Nano,
but uses the more powerful Tegra186 SoC for added performance.
Signed-off-by: Thierry Reding <treding@nvidia.com>
DART (Device Address Resolution Table) is the iommu found on Apple
ARM SoCs such as the M1.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20210803121651.61594-3-sven@svenpeter.dev
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Renesas RZ/A and RZ/G2L I2C Bus Interface has no less than 8
interrupts. Hence document the "interrupt-names" property, to make it
easier to review the interrupt mappings in DTS files.
Note that this property cannot be made required yet, as the RIIC nodes
in all DTS files lack the property.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/a81d0e14e395f297666e8c3a8ce3e292d2606a65.1626267422.git.geert+renesas@glider.be
Remove the interrupts property as we no longer specify it.
Signed-off-by: satya priya <skakit@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1627910464-19363-4-git-send-email-skakit@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The original binding submission for MT8195 pinctrl described the
possible drive strength values in micro-amps in its description, but
then proceeded to list register values in its device tree binding
constraints.
However, the macros used with the Mediatek pinctrl bindings directly
specify the drive strength in micro-amps, instead of hardware register
values. The current driver implementation in Linux does convert the
value from micro-amps to hardware register values. This implementation
is also used with MT7622 and MT8183, which use real world values in
their device trees.
Given the above, it was likely an oversight to use the raw register
values in the binding. Correct the values in the binding. Also drop
the description since the binding combined with its parent,
pinctrl/pincfg.yaml, the binding is now self-describing.
Fixes: 7f7663899d ("dt-bindings: pinctrl: mt8195: add pinctrl file and binding document")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210726111941.1447057-1-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Update the PRUSS schema file to include the dma-coherent property
that indicates the coherency of the IP. The PRUSS IPs on 66AK2G
SoCs do use this property.
The new added dma-coherent property is a required property _only_
for 66AK2G SoCs and is not required/applicable for other SoCs, so
the binding is backward compatible for other SoCs. This update is
being done before the corresponding dts nodes can be added for 66AK2G
SoCs.
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
The K3 AM64x SoCs also have the Gigabit Ethernet capable PRU-ICSS IP
that is present on existing K3 AM65x and J721E SoCs (ICSSG). The IP
is similar to the ones used on K3 J721E or AM65x SR2.0 SoCs.
Update the PRUSS bindings for these ICSSG instances.
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
New compatible to manage ball out and pin muxing of STM32MP135 SoC.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de
Link: https://lore.kernel.org/r/20210723132810.25728-2-alexandre.torgue@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The SC8180x platform comes with PMC8180 and PMC8180c, add support for
the GPIO controller in these PMICs.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210629003851.1787673-1-bjorn.andersson@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
adi,adis:
- Ensure GPIO pin direction set explicitly in driver.
fxls8952af:
- Fix use of ret when not initialized.
- Fix issue with use of module symbol from built in.
hdc100x:
- Add a margin to conversion time as some parts run to slowly.
palmas-adc:
- Fix a wrong exit condition that leads to adc period always being set
to maximum value.
st,sensors:
- Drop a wrong restriction on number of interrupts in dt binding.
ti-ads7950:
- Ensure CS deasserted after channel read.
-----BEGIN PGP SIGNATURE-----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=yqHg
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-5.14a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
First set of fixes for IIO in the 5.14 cycle
adi,adis:
- Ensure GPIO pin direction set explicitly in driver.
fxls8952af:
- Fix use of ret when not initialized.
- Fix issue with use of module symbol from built in.
hdc100x:
- Add a margin to conversion time as some parts run to slowly.
palmas-adc:
- Fix a wrong exit condition that leads to adc period always being set
to maximum value.
st,sensors:
- Drop a wrong restriction on number of interrupts in dt binding.
ti-ads7950:
- Ensure CS deasserted after channel read.
* tag 'iio-fixes-5.14a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: adc: Fix incorrect exit of for-loop
iio: humidity: hdc100x: Add margin to the conversion time
dt-bindings: iio: st: Remove wrong items length check
iio: accel: fxls8962af: fix i2c dependency
iio: adis: set GPIO reset pin direction
iio: adc: ti-ads7950: Ensure CS is deasserted after reading channels
iio: accel: fxls8962af: fix potential use of uninitialized symbol
Add binding documentation for the MT8167 SoC.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add compatibles and port definitions for the SC8180x RPMH interconnect
providers.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
[bjorn: Split defines from driver patch and added binding update]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210723194243.3675795-1-bjorn.andersson@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
BMC156 is very smilar to BMC150, but it has only one accelerometer
interrupt pin. It would make sense if only INT1 was exposed but someone
at Bosch decided to only have an INT2 pin.
In this case, it does not make sense if the first interrupt pin is
treated as INT1 (since that pin does not exist). Add a note to the
bindings that the first interrupt pin is treated as INT2 for BMC156.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210802155657.102766-3-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The binding already allows specifying both interrupt pins, but there
is currently no way to describe a board where (for whatever reason)
only INT2 is connected. Make it possible to use "interrupt-names"
to make it explicit which interrupt pin is meant in the interrupts.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210802155657.102766-2-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add devicetree binding for Sensirion sgp40 gas sensor to trivial
devices.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Link: https://lore.kernel.org/r/20210804154549.GA3223@arbad
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Restore the assgined-clocks and assigned-clock-parents properties that
were lost during the txt -> YAML conversion.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210709210729.953114-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Document a new phy-type property which will be used to determine whether
the phy should operate in D-PHY or C-PHY mode.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210617144349.28448-3-jonathan@marek.ca
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
These got lost when going from .txt to .yaml bindings, add them back.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Fixes: 8fc939e72f ("dt-bindings: msm: dsi: add yaml schemas for DSI PHY bindings")
Link: https://lore.kernel.org/r/20210617144349.28448-2-jonathan@marek.ca
Reviewed-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The AXP209 compatible was used in Device Trees and the driver, but it
was never documented.
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: linux-pm@vger.kernel.org
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The AXP803 compatible was introduced recently with a fallback to the
AXP813, but it was never documented.
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: linux-pm@vger.kernel.org
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
max77849 is a combined fuel-gauge, charger and MUIC device. Add it to
the bindings documentation.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
qfprom devices on some SoCs need to vote on the performance state
of a power-domain, so add the power-domains optional property to the
bindings
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210806085947.22682-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document USB phy bindings for RZ/G2L SoC.
RZ/G2L USB2.0 phy uses line ctrl register for OTG_ID pin changes. It uses
a different OTG-BC interrupt bit for device recognition. Apart from this,
the PHY reset is controlled by USBPHY control IP and Document reset is a
required property.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210727185527.19907-3-biju.das.jz@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SC8180x has two instances of the QMP USB/DP combo PHYs, add a
compatible for these.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210721225630.3035861-1-bjorn.andersson@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The PHYA architecture is updated, and doesn't support slew rate
calibration anymore on 7nm or advanced process, add a new version
number to support it.
Due to the FreqMeter bank is not used but reserved, it's backward
with v2 until now.
For mt8195, no function changes when use generic v2 or v3 compatible,
but prefer to use v3's compatible, it will not waste the time to
calibrate the slew rate, and also correspond with hardware version.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1627028562-23584-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Convert to jason schema.
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Li Jun <jun.li@nxp.com>
Cc: linux-phy@lists.infradead.org
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210715082536.1882077-5-aisheng.dong@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The GPU clock controller found in SC8180x is a variant of the same block
found in SM8150, but with one additional clock frequency for the
gmu_clk_src clock.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210721225329.3035779-1-bjorn.andersson@linaro.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Document the qcom,sc7280-idp2 board based off sc7280 SoC,
The board is also known as piglin in the Chrome OS builds,
so document the google,piglin compatible as well.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1628082199-17002-2-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Document the alcatel,idol347 board. It was missing leading to warning:
arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dt.yaml: /: compatible: 'oneOf' conditional failed, one must be fixed:
Additional items are not allowed ('qcom,msm8916' was unexpected)
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-7-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmEHNoEeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGv34H/05pr8hlCcs14RcN
V6YWWHZoAi6jpClkp8612e3Pn9xTVFHaEd81E0dJVO7Vr0xAeuObeG7yDpbnFGIR
9Q1PLAeMJUi+dxLV7A0VpWHm15ODtDHnCd2P5y4YNvH/iiO0mMb6Pqw8bUF9HKII
M8u/Lqn8FXyHTUG2yqGTAZJgUVWpbD93IeKVHG4LdsiVCJuAaXLvg6LmkxWTYeGW
BcDDIL53sY4IgwrAVgwIji8Wiqmh4Bzp1+BvksPymA/91u0kJoZS9397CsDIomHp
i0RQ7Roo/sGamC7HR6MOHm21DiwIkwY1ULo+PglYSw5U3mohkMJemBvQRW3PGYJy
7SADmiE=
=LOoK
-----END PGP SIGNATURE-----
Merge tag 'v5.14-rc4' into media_tree
Linux 5.14-rc4
* tag 'v5.14-rc4': (948 commits)
Linux 5.14-rc4
pipe: make pipe writes always wake up readers
Revert "perf map: Fix dso->nsinfo refcounting"
mm/memcg: fix NULL pointer dereference in memcg_slab_free_hook()
slub: fix unreclaimable slab stat for bulk free
mm/migrate: fix NR_ISOLATED corruption on 64-bit
mm: memcontrol: fix blocking rstat function called from atomic cgroup1 thresholding code
ocfs2: issue zeroout to EOF blocks
ocfs2: fix zero out valid data
lib/test_string.c: move string selftest in the Runtime Testing menu
gve: Update MAINTAINERS list
arch: Kconfig: clean up obsolete use of HAVE_IDE
can: esd_usb2: fix memory leak
can: ems_usb: fix memory leak
can: usb_8dev: fix memory leak
can: mcba_usb_start(): add missing urb->transfer_dma initialization
can: hi311x: fix a signedness bug in hi3110_cmd()
MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver
scsi: fas216: Fix fall-through warning for Clang
scsi: acornscsi: Fix fall-through warning for clang
...
Convert the binding to DT schema format. Also update the binding
to fix shortcomings
* Add "nxp,kinetis-k20" fallback compatible
* add programming SPI interface and reset GPIO
* add main clock
* add voltage supplies
* drop spi-max-frequency from required properties,
driver will setup max. frequency
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20210802172309.164365-2-sebastian.reichel@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some cases we want to specify overrun-throttle like other 8250 drivers
are doing.
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210727103533.51547-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document the properties for arm,scmi-virtio compatible nodes.
The backing virtio SCMI device is described in patch [1].
While doing that, make shmem property required only for pre-existing
mailbox and smc transports, since virtio-scmi does not need it.
[1] https://lists.oasis-open.org/archives/virtio-comment/202102/msg00018.html
Link: https://lore.kernel.org/r/20210803131024.40280-14-cristian.marussi@arm.com
Co-developed-by: Peter Hilber <peter.hilber@opensynergy.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Igor Skalkin <igor.skalkin@opensynergy.com>
[ Peter: Adapted patch for submission to upstream. ]
Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
[ Cristian: converted to yaml format, moved shmen required property. ]
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This will enable temperature reporting for various SoC
components.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-15-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
taregeted for v5.15:
- Add DT bindings to the expansion bus and PATA libata driver.
- Add a new expansion bus driver.
- Rewrite the watchdog driver to use the watchdog core and
spawn from the timer (clocksource) driver.
- Refactor the PATA/libata driver to probe from the device
tree and use the expansion bus driver to manipulate chip
select timings directly.
-----BEGIN PGP SIGNATURE-----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=v2E7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=2bLl
-----END PGP SIGNATURE-----
Merge tag 'ixp4xx-drivers-arm-soc-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/drivers
IXP4xx driver updates for modernizing the IXP4xx platforms,
taregeted for v5.15:
- Add DT bindings to the expansion bus and PATA libata driver.
- Add a new expansion bus driver.
- Rewrite the watchdog driver to use the watchdog core and
spawn from the timer (clocksource) driver.
- Refactor the PATA/libata driver to probe from the device
tree and use the expansion bus driver to manipulate chip
select timings directly.
* tag 'ixp4xx-drivers-arm-soc-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
pata: ixp4xx: Rewrite to use device tree
pata: ixp4xx: Add DT bindings
pata: ixp4xx: Refer to cmd and ctl rather than csN
pata: ixp4xx: Use IS_ENABLED() to determine endianness
pata: ixp4xx: Use local dev variable
watchdog: ixp4xx: Rewrite driver to use core
bus: ixp4xx: Add a driver for IXP4xx expansion bus
bus: ixp4xx: Add DT bindings for the IXP4xx expansion bus
Link: https://lore.kernel.org/r/CACRpkdZaCosXsgp02nuUbd_nEvdxm5-z0+d0oSA97UTWQ0RQQg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The i.MX8MQ SoC integrates a different MIPI CSI receiver as the i.MX8MM so
describe the DT bindings for it.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The i.MX8MM integrates a CSI bridge IP core, as the i.MX7. There seems
to be no difference between the two SoCs according to the reference
manual, but as documentation may not be accurate, add a compatible
string for the i.MX8MM, with a fallback on the compatible i.MX7.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Add dt-bindings documentation for Sony imx412 sensor driver
- Add MAINTAINERS entry for Sony imx412 binding documentation
Signed-off-by: Martina Krasteva <martinax.krasteva@intel.com>
Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Acked-by: Paul J. Murphy <paul.j.murphy@intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Add dt-bindings documentation for Sony imx335 sensor driver
- Add MAINTAINERS entry for Sony imx335 binding documentation
Signed-off-by: Martina Krasteva <martinax.krasteva@intel.com>
Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Acked-by: Paul J. Murphy <paul.j.murphy@intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch adds binding documentation for the IR transmitter
available in Amlogic Meson SoCs.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmEKaBUTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqSvgCACpR64hydl7/qt9QGnm9Ym6/v/L9y9v
aBfZMQsedP1GSuev5PpxghXU4GF0LXiDr6ryr0hhu7w2ojjlLNl9sVHCF9qdAJKz
x2D4YTlxct2KuPBdhWllQr/KWFbJh2IzarHEWzdo+QoU5A8jDlsK2kLeeikFECzT
fVUe3mu1k66/DvHsetsfzIvbUkuHk2SPpK/pwrUC6Siw6wQZBHlSoUEtBNwEPlyH
8+ZQJPqtrjr2v3mZUOkgHrlXEOZRu6OM3i1Yv2bn2x4VI+3KQHEw/cA1WNE2AOzN
CfMp4sS98QdCrAboX4VJZpGAbziTFHedqFjjIP9ultCfH9ROHhQj4Zsl
=37wt
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.15-20210804' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2021-08-04
this is a pull request of 5 patches for net-next/master.
The first patch is by me and fixes a typo in a comment in the CAN
J1939 protocol.
The next 2 patches are by Oleksij Rempel and update the CAN J1939
protocol to send RX status updates via the error queue mechanism.
The next patch is by me and adds a missing variable initialization to
the flexcan driver (the problem was introduced in the current net-next
cycle).
The last patch is by Aswath Govindraju and adds power-domains to the
Bosch m_can DT binding documentation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds device tree bindings for the Intel IXP4xx compact flash card
interface.
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds device tree bindings for the IXP4xx expansion bus controller.
Cc: Marc Zyngier <maz@kernel.org>
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Document power-domains property for adding the Power domain provider.
Link: https://lore.kernel.org/r/20210802091822.16407-1-a-govindraju@ti.com
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This reverts commit b79c6fba6c, reversing
these changes made to 0ac2627134:
commit 6a0eb6c9d9 ("dt-bindings: net: qcom,ipa: make imem interconnect
optional")
commit f8bd3c82bf ("arm64: dts: qcom: sc7280: add IPA information")
commit fd0f72c34b ("arm64: dts: qcom: sc7180: define ipa_fw_mem node")
I intend for these commits to go through the Qualcomm repository, to
avoid conflicting with other activity being merged there.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210802233019.800250-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add gpio-ranges and "qcom,spmi-gpio" compatible to match with the
parent qcom,pmic-gpio.yaml binding.
Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Guru Das Srinagesh <gurus@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
AST2600 SoC has 2 SGPIO master interfaces one with 128 pins another one
with 80 pins. Add ast2600-sgpiom compatibles and update descriptions to
introduce the max number of available gpio pins that AST2600 supported.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210712100317.23298-3-steven_lee@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
sgpio-aspeed bindings should be converted to yaml format.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210712100317.23298-2-steven_lee@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Modify LINK_1000_ACTIVITY and LINK_100_ACTIVITY to VSC8531_LINK_1000_ACTIVITY
and VSC8531_LINK_100_ACTIVITY respectively in the example of ethernet-phy node
according to include/dt-bindings/net/mscc-phy-vsc8531.h.
Signed-off-by: Baisheng Gao <gaobaisheng@bonc.com.cn>
Link: https://lore.kernel.org/r/1627488086-200263-1-git-send-email-gaobaisheng@bonc.com.cn
Signed-off-by: Rob Herring <robh@kernel.org>
Document Gigabit Ethernet IP found on RZ/G2L SoC.
Gigabit Ethernet Interface includes Ethernet controller (E-MAC),
Internal TCP/IP Offload Engine (TOE) and Dedicated Direct memory
access controller (DMAC) for transferring transmitted Ethernet
frames to and received Ethernet frames from respective storage
areas in the URAM at high speed.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210727123450.15918-1-biju.das.jz@bp.renesas.com
Signed-off-by: Rob Herring <robh@kernel.org>
- Document support for the new R-Car H3e-2G and M3e-2G SoCs and
boards.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYQP2WAAKCRCKwlD9ZEnx
cBelAQCNCNIYQUR9eZ9FikP9XPLZOXWCT8dwxr2bzdTjn+iXeAEA1nWEHKld8KlI
IOjjav5d6aj5cnZtKVReiyC4e0BPpgI=
=DYKV
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=O3As
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-bindings-for-v5.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas DT binding updates for v5.15
- Document support for the new R-Car H3e-2G and M3e-2G SoCs and
boards.
* tag 'renesas-dt-bindings-for-v5.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: arm: renesas: Document R-Car H3e-2G and M3e-2G SoCs and boards
Link: https://lore.kernel.org/r/cover.1627650706.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The AXP305 PMIC used on many boards with the H616 SoC seems to be fully
compatible to the AXP805 PMIC, so add the proper chain of compatible
strings.
Also at least on one board (Orangepi Zero2) there is no interrupt line
connected to the CPU, so make the "interrupts" property optional.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add both the jz4760 and jz4760b, plus a property to use the internal
divider on the b variant and document it.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210726082033.351533-6-cbranchereau@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Document DMA support in binding document.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210719134040.7964-7-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Document RZ/G2L ASoC serial sound interface bindings.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210719134040.7964-2-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This removes the old plaintext Gemini binding and replace it
with a YAML schema, adding some new boards in the process.
While we are at it, add the missing vendors to the vendor
prefix file.
Drop the overly deliberate description of subnodes and the big
example from the old document. Keep the elaborate description.
I noticed that "wiliboard" is not a real vendor, the vendor
is named "wiligear" so deprecated this and replaced with the
proper vendor.
Cc: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210723152356.1874088-1-linus.walleij@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Allow to extend expression of sub nodes to optionally indicate bit
position. This extension is needed to distinguish between different bit
positions in the same address.
For example, there are two nvmem nodes starting with bit 4 and bit 0
at the same address 0x54. In this case, it can be expressed as follows.
trim@54,4 {
reg = <0x54 1>;
bits = <4 2>;
};
trim@54,0 {
reg = <0x54 1>;
bits = <0 4>;
};
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1626661864-15473-2-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add RGMII internal clock delay for FEC controller.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add more compatible items for i.MX8/8M platforms.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Default REQ/ACK protocol consists in maintaining ACK signal up to the
removal of REQuest and the transfer completion.
In case of alternative REQ/ACK protocol, ACK de-assertion does not wait the
removal of the REQuest, but only the transfer completion.
Due to a possible DMA stream lock when transferring data to/from STM32
USART/UART, this new bindings allow to select this alternative protocol in
device tree, especially for STM32 USART/UART nodes.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210624093959.142265-2-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the dt-binding for the RPM Clock Controller on the SM4250/6115 SoCs.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210627185927.695411-3-iskren.chernev@gmail.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This patch adds the new binding documentation for system clock
and functional clock on Mediatek MT8192.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210726105719.15793-2-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The graph schema doesn't allow custom properties on endpoint nodes for
'#/properties/port' and '#/$defs/port-base' should be used instead. This
doesn't matter until 'unevaluatedProperties' support is implemented.
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Marek Vasut <marex@denx.de>
Cc: Krishna Manikandan <mkrishn@codeaurora.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20210719195001.2412345-1-robh@kernel.org
The graph schema doesn't allow custom properties on endpoint nodes for
'#/properties/port' and '#/$defs/port-base' should be used instead. This
doesn't matter until 'unevaluatedProperties' support is implemented.
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210719194850.2410511-1-robh@kernel.org
The A83t OHCI compatible was introduced in device trees, but it was
never documented.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210721140424.725744-38-maxime@cerno.tech
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The A83t EHCI compatible was introduced in device trees, but it was
never documented.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210721140424.725744-37-maxime@cerno.tech
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add an dedicated interrupt which is usually EINT to support runtime PM,
meanwhile add "interrupt-names" property, for backward compatibility,
it's optional and used when wakeup interrupt exists
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-5-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support optional property of role-switch-default-mode,
used to set default mode while usb role is USB_ROLE_NONE when use
usb-role-switch to switch mode.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-4-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support to disable specific usb2 host ports, it's useful when
a usb2 port is disabled on some platforms, but enabled on others for
the same SoC, another case is that the different package may support
different number of ports.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-3-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Due to no platforms use a multi-funtion pin to detect VBUS
status until now when support dual role mode, prefer not to
support it anymore;
Another reason is that the controller doesn't support idle status,
the dual role port works as device or as host, using an IDDIG pin
is good enough, this will help to save another multi-function pin;
And fix a typo of 'neede';
Last modify example using VBUS to turn on/off device, for device
only mode, the driver doesn't get extcon.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-2-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add device tree binding document for RZ/G2L USBPHY Control Device.
It mainly controls reset and power down of the USB/PHY.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210719121938.6532-4-biju.das.jz@bp.renesas.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Required bump from v5.13-rc3 to v5.14-rc3, and to pick up sysfb compilation fixes.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The Intel IXP425 Vulcan board has an Exar XR16L2551 8250-compatible.
It works like an 8250 but it is always good to specify exactly which
component we are using. This allows us to specify:
compatible = "exar,xr16l2551", "ns8250";
Put in some sibling Exar serial compatibles while we're at it.
Cc: Marc Zyngier <maz@kernel.org>
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210716225319.1282704-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document the compatible values for the R-Car H3e-2G (R8A779M1) and
M3e-2G (R8A779M3) SoCs. These are different gradings of the R-Car H3
ES3.0 (R8A77951) and M3-W+ (R8A77961) SoCs.
All R-Car Gen3e on-SoC devices are identical to the devices on the
corresponding R-Car Gen3 SoCs, and thus just use the compatible values
for the latter. The root compatible properties do gain an additional
value, to sort out integration issues if they ever arise.
Document the use of these SoCs on the Salvator-XS and ULCB (with and
without Kingfisher) development boards.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/fd11328199d8abba5b9ee1f43f4d467d1bc41df6.1626708063.git.geert+renesas@glider.be
Add vendor prefix for Shenzhen QiShenglong Industrialist Co., Ltd.
QiShenglong is a Chinese manufacturer of handheld gaming consoles, most of
which run (very old) versions of Linux.
QiShenglong is known as Hamy.
Signed-off-by: Artjom Vejsel <akawolf0@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210725221527.1771892-2-akawolf0@gmail.com
We need the fixes in here, and this resolves a merge issue with
drivers/usb/dwc3/gadget.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring:
- LPDDR4 DRAM
- eMMC FLASH
- Gateworks System Controller
- LTE CAT M1 modem
- USB 2.0 HUB
- M.2 Socket with USB2.0, PCIe, and dual-SIM
- IMX8M FEC
- PCIe based GbE
- RS232/RS485/RS422 serial transceiver
- GPS
- CAN bus
- WiFi / Bluetooth
- MIPI header (DSI/CSI/GPIO/PWM/I2S)
- PMIC
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmD95yIeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGqp0H/j/xHL20EHaUJOaV
iJjnfGyjtnkLC5FCoV/q/v9sFuSW2p4W1nyF8/eIgVKObef94Mg4/xxaHQrWIM56
cbzK9aIcD9InAuImJ6lju4fqjNmFrt2x7mhfzjPKqmhfINfZ5CohpLFN5XdOwzYC
l+ZgmUUl7GLDAND2M6rtkc7AOk4qTyAySDvvPFELE/uNgV4EKaENSIWofHhEzW5v
Yk+4agawaFTfa6H9+uMVYZBOcEKwheQ0E2tcOJvHJT8Mwm8MFoC/B7fLY5zxIdN2
7A7r/7qbSQmSDSjOgwKS4ZOjom0xGSD+V+596SzET6jkbahR2HJ/mrFvmD7GNEoW
OWJPjzI=
=vzIM
-----END PGP SIGNATURE-----
Backmerge tag 'v5.14-rc3' into drm-next
Linux 5.14-rc3
Daniel said we should pull the nouveau fix from fixes in here, probably
a good plan.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The Rockchip DSI controller on some SoCs also controls a bidrectional
dphy, which would be connected to an Image Signal Processor as a phy
in the rx configuration.
So allow a #phy-cells property for the dsi controller.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Acked-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210210111020.2476369-3-heiko@sntech.de
