cma_accept_iw() needs to return an error if conn_params is NULL.
Since this is coming from user space, we can crash.
Reported-by: Shaobo He <shaobo@cs.utah.edu>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Cc: stable@vger.kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
A quote from the IB spec:
However, if the Consumer does not wait for the Affiliated Asynchronous
Last WQE Reached Event, then WQE and Data Segment leakage may occur.
Therefore, it is good programming practice to tear down a QP that is
associated with an SRQ by using the following process:
* Put the QP in the Error State;
* wait for the Affiliated Asynchronous Last WQE Reached Event;
* either:
* drain the CQ by invoking the Poll CQ verb and either wait for CQ
to be empty or the number of Poll CQ operations has exceeded CQ
capacity size; or
* post another WR that completes on the same CQ and wait for this WR to return as a WC;
* and then invoke a Destroy QP or Reset QP.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Israel Rukshin <israelr@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Steve Wise <swise@opengridcomputing.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Avoid that the following message is printed if login fails:
scsi host0: ib_srp: Sending CM DREQ failed
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Israel Rukshin <israelr@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Report the destination port GID if connecting fails.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Israel Rukshin <israelr@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use lockdep_assert_held() statements to verify at run-time
whether the proper locks are held.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Israel Rukshin <israelr@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Avoid that srp_process_rsp() overwrites the status information
in ch if the SRP target response timed out and processing of
another task management function has already started. Avoid that
issuing multiple task management functions concurrently triggers
list corruption. This patch prevents that the following stack
trace appears in the system log:
WARNING: CPU: 8 PID: 9269 at lib/list_debug.c:52 __list_del_entry_valid+0xbc/0xc0
list_del corruption. prev->next should be ffffc90004bb7b00, but was ffff8804052ecc68
CPU: 8 PID: 9269 Comm: sg_reset Tainted: G W 4.10.0-rc7-dbg+ #3
Call Trace:
dump_stack+0x68/0x93
__warn+0xc6/0xe0
warn_slowpath_fmt+0x4a/0x50
__list_del_entry_valid+0xbc/0xc0
wait_for_completion_timeout+0x12e/0x170
srp_send_tsk_mgmt+0x1ef/0x2d0 [ib_srp]
srp_reset_device+0x5b/0x110 [ib_srp]
scsi_ioctl_reset+0x1c7/0x290
scsi_ioctl+0x12a/0x420
sd_ioctl+0x9d/0x100
blkdev_ioctl+0x51e/0x9f0
block_ioctl+0x38/0x40
do_vfs_ioctl+0x8f/0x700
SyS_ioctl+0x3c/0x70
entry_SYSCALL_64_fastpath+0x18/0xad
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Israel Rukshin <israelr@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Steve Feeley <Steve.Feeley@sandisk.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
After srp_process_rsp() returns there is a short time during which
the scsi_host_find_tag() call will return a pointer to the SCSI
command that is being completed. If during that time a duplicate
response is received, avoid that the following call stack appears:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: srp_recv_done+0x450/0x6b0 [ib_srp]
Oops: 0000 [#1] SMP
CPU: 10 PID: 0 Comm: swapper/10 Not tainted 4.10.0-rc7-dbg+ #1
Call Trace:
<IRQ>
__ib_process_cq+0x4b/0xd0 [ib_core]
ib_poll_handler+0x1d/0x70 [ib_core]
irq_poll_softirq+0xba/0x120
__do_softirq+0xba/0x4c0
irq_exit+0xbe/0xd0
smp_apic_timer_interrupt+0x38/0x50
apic_timer_interrupt+0x90/0xa0
</IRQ>
RIP: srp_recv_done+0x450/0x6b0 [ib_srp] RSP: ffff88046f483e20
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Israel Rukshin <israelr@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Steve Feeley <Steve.Feeley@sandisk.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
'qedr_alloc_pbl_tbl()' can not return NULL.
In qedr_init_user_queue():
- simplify the test for the return value, no need to test for NULL
- propagate the error pointer if needed, otherwise 0 (success) is returned.
This is spurious.
In init_mr_info():
- test the return value with IS_ERR
- propagate the error pointer if needed instead of an exlictit -ENOMEM.
This is a no-op as the only error pointer that we can have here is
already -ENOMEM
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When CONFIG_DCB is disabled, we get a link error:
drivers/infiniband/built-in.o: In function `bnxt_re_setup_qos':
trace.c:(.text+0x155774): undefined reference to `dcb_ieee_getapp_mask'
trace.c:(.text+0x155774): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `dcb_ieee_getapp_mask'
trace.c:(.text+0x155794): undefined reference to `dcb_ieee_getapp_mask'
trace.c:(.text+0x155794): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `dcb_ieee_getapp_mask'
Like the other drivers that use this function, a Kconfig dependency is
the correct fix.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
I ran into a build error on arm64 randconfig testing:
infiniband/hw/hns/hns_roce_main.c:539:1: error: data definition has no type or storage class [-Werror]
infiniband/hw/hns/hns_roce_main.c:539:1: error: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE' [-Werror=implicit-int]
infiniband/hw/hns/hns_roce_main.c:539:1: error: parameter names (without types) in function declaration [-Werror]
infiniband/hw/hns/hns_roce_main.c:979:226: error: data definition has no type or storage class [-Werror]
infiniband/hw/hns/hns_roce_main.c:979:226: error: type defaults to 'int' in declaration of 'module_init' [-Werror=implicit-int]
infiniband/hw/hns/hns_roce_main.c:979:1: error: parameter names (without types) in function declaration [-Werror]
Including the module.h makes it build again.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
gcc-7 produces a mysterious warning about the size argument being potentially out
of range:
drivers/infiniband/hw/hfi1/verbs.c: In function 'init_cntr_names':
drivers/infiniband/hw/hfi1/verbs.c:1644:2: error: 'memcpy': specified size between 18446744071562067968 and 18446744073709551615 exceeds maximum object size 9223372036854775807 [-Werror=stringop-overflow=]
This seems to refer to a the case where an 64-bit size_t gets truncated
into a negative 'int' and subsequently turned into a high 64-bit number
again.
The fix is clearly to use size_t here, which matches the type that gets
used for this value elsewhere.
Fixes: b7481944b0 ("IB/hfi1: Show statistics counters under IB stats interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There are 2 labels to mark the same statements. Replace the 2 labels
with one versatile labe.
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In the function ipoib_cm_nonsrq_init_rx, the memory is not
allocated successfully. It is not necessary to free it.
CC: Joe Jin <joe.jin@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Update several usages of kmalloc/user_copy to memdup_copy and
memdup_copy_nul.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Rename RVT AETH defines and export in rdma/ib_hdrs.h
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Return usec from an index into ib_rvt_rnr_table.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If the DC is in shutdown state, the set link state function will return
an error. Since this is not a failure in this state, make sure to
only call set link state if the DC is on.
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use rate-limit state to limit number of messages logged
to kernel message buffer for DCC errors. Add new macro
dd_dev_info_ratelimited for that propose. Replace all
dd_dev_info calls in handle_dcc_err function with
rate-limited version.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The send complete for RC QPs mismanages the ack count when the
responder side is only in RTR.
A QP in that state cannot send requests, but it can be the target
for operations that elicit responses.
Adjust the RC completion logic to correct the count maintenance
by reflecting RECV_OK in a new state test.
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
To improve code reuse, add small SGE state helper routines to rdmavt_mr.h.
Leverage these in hfi1, including refactoring of hfi1_copy_sge.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Convert copy_sge and related SGE state functions to use boolean.
For determining if QP is in user mode, add helper function in rdmavt_qp.h.
This is used to determine if QP needs the last byte ordering.
While here, change rvt_pd.user to a boolean.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Reduce qib code footprint by using the rdmavt timers.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Reduce hfi1 code footprint by using the rdmavt timers.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
To move common code across target to rdmavt for code reuse.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add rvt_compute_aeth() and rvt_get_credit() as shared functions in
rdmavt, moved from hfi1/qib logic.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add rvt_rc_error() and rvt_comm_est() as shared functions in
rdmavt, moved from hfi1/qib logic.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The EFI variable that provides board ID is named
by the PCI address of the device, which is published
in upper-case, while the HFI1 driver reads the EFI
variable in lower-case.
This prevents returning the correct board id when
queried through sysfs. Read EFI variables in
upper-case if the lower-case read fails.
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Some fields in struct hfi1_packet are oversized.
Reduce them.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The r_psn and s_rnr_retry are missing.
Add with this patch.
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There are some memory allocation calls in hfi1_create_ctxtdata()
that do not use the numa function parameter. This
can cause cache lines to be filled over QPI.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Having per-CPU reference count for each MR prevents
cache-line bouncing across the system. Thus, it
prevents bottlenecks. Use per-CPU reference counts
per MR.
The per-CPU reference count for FMRs is used in
atomic mode to allow accurate testing of the busy
state. Other MR types run in per-CPU mode MR until
they're freed.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Receive code paths use the QP's device and port
number to access the struct hfi1_ibport. When an
instance of struct hfi1_ctxtdata is present, it can
be used to access struct hfi1_ibport through a pointer.
This makes struct hfi1_ibport lookup time faster as an
array doesn't have to be indexed and access fields in
other cache-lines.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The resource specific wait locking missed correcting the lock
for the notify_error_qp() calldown.
The code is fixed to correctly use the iowait lock field to protect
the head that is protected by that lock.
Fixes: Commit 4e045572e2 ("IB/hfi1: Add unique txwait_lock for txreq events")
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
After extended testing, it was found that the previous PCIe Gen
3 recipe, which used adaptive CTLE with Preset 4, could cause an
NMI/Surprise Link Down in about 1 in 100 to 1 in 1000 power cycles on
some platforms. New EV data combined with extensive empirical data
indicates that the new recipe should use static CTLE with Preset 6 for
all integrated silicon SKUs.
Fixes: c3f8de0b33 ("IB/hfi1: Add static PCIe Gen3 CTLE tuning")
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The read of s_head in the hfi1_make_rc_req() and
qib_make_rc_req() lack the necesary barrier instuctions.
Correct other ACCESS_ONCE() warnings in the same file.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In the event that the IRQ thread is extremely busy, the
processing of an rcd wait list can be delayed by quite
a bit until the IRQ thread completes its work.
The QP reset reference count wait can then appear to be stuck, thus
causing up a QP destroy to emit the hung task diagnostic.
Fix by processing the qp wait list periodically from the thread. The
interval is a multiple (currently 4) of the MAX_PKT_RECV.
Also, reduce some of the excessive inlining. The guidelines
are per packet is ok inline, otherwise the choice is based on
likelyhood of execution.
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The qp_wait_list processing leaves the defered ack count
at its prior value.
This can result in a premature send of an ack.
Fixed by unconditionally reseting the defered ack count
in hfi1_send_rc_ack().
Fixes: Commit 7c091e5c06 ("staging/rdma/hfi1: add ACK coalescing logic")
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use setup_timer function instead of initializing timer with the function
and data fields.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
As iser connections can share completion contexts, we need
to protect the active_qps update each time we set it.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Clean up send_connect() and make use of t6 specific
active open request struct.
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Bharat Teja <bharat@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The destination address in a listening rdma_id does not have an address
family. Since address family in both sides of a connection must be the
same in rdma_bind_addr() we set the address family of the destination to
the address family of the source.
This patch serves the logic in cma_port_is_unique() which requires to
know if destination address that is associated with a rdma_id is any address
(cma_zero_addr() and cma_loopback_addr()).
This can happen when port reuse is checked for a port number
that is being listened to.
Fixes: 19b752a19d ("IB/cma: Allow port reuse for rdma_id")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add new entry to the RDMA-CM configfs that allows users
to select default TOS for RDMA-CM QPs.
This is useful for users that want to control the TOS for legacy
applications without changing their code.
Application that sets the TOS explicitly using the rdma_set_option
API will continue to work as expected, meaning overriding the configfs
value.
CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
