The s_ahgpsn was incorrectly placed in the read-mostly section of the QP
and the s_curr_size and s_hdrwords are oversized. The misplaced
s_ahgpsn will cause the read-mostly cachelines to thrash.
Place s_ahgpsn in the send side cache lines and correctly size and
s_hdrwords and s_cur_size to keep the send side cachelines at the same
size.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The LIDs passed to opa_extended_lid are in __be32 format,
change function signature accordingly.
This fixes the following sparse warnings:
drivers/infiniband/core/cm.c:1181:60: warning: incorrect type in
argument 1 (different ba
drivers/infiniband/core/cm.c:1182:60: warning: incorrect type in
argument 2 (different ba
drivers/infiniband/core/cm.c:1242:68: warning: incorrect type in
argument 1 (different ba
drivers/infiniband/core/cm.c:1243:68: warning: incorrect type in
argument 2 (different ba
drivers/infiniband/core/cm.c:2922:66: warning: incorrect type in
argument 1 (different ba
drivers/infiniband/core/cm.c:2923:66: warning: incorrect type in
argument 2 (different ba
include/rdma/opa_addr.h:102:14: warning: cast to restricted __be32
Fixes: e92aa00a51 ("IB/CM: Add OPA Path record support to CM")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When the link is disabled and re-enabled, the host version bit is not
set again, so the firmware behaves as though it’s interacting with an
old driver. This causes LNI to get out of sync. The host version bit
needs to be set at load_8051_firmware() and _dc_start(). Currently, it's
only set at load_8051_firmware().
Create a common function to set the bit with the intent to make the code
more maintainable in the future, set the host version bit at _dc_start()
and modify the 8051 command API to prevent a deadlock as _dc_start() is
already holding the dc8051 lock.
Fixes: 913cc67159 ("IB/hfi1: Always perform offline transition")
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The addition of the VNIC contexts to num_rcv_contexts changes the
meaning of the sysfs value nctxts from available user contexts, to
user contexts + reserved VNIC contexts.
User applications that use nctxts are now broken.
Update the calculation so that VNIC contexts are used only if there are
hardware contexts available, and do not silently affect nctxts.
Update code to use the calculated VNIC context number.
Update the sysfs value nctxts to be available user contexts only.
Fixes: 2280740f01 ("IB/hfi1: Virtual Network Interface Controller (VNIC) HW support")
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Niranjana Vishwanathapura <Niranjana.Vishwanathapura@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: <Stable@vger.kernel.org> #v4.12+
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The 16B changes to the output side of the header trace introduced
two issues:
1. An uninitialized field "l4" for 9B packets
This field needs to be given a value of 0 for 9B
packets to insure a correct 9B trace.
The fix adds a new define to insure that there is a dummy
default for 9B packets to insure the correct string
is decoded.
2. Use of entry vs. __entry in field references
Fixes: Commit 863cf89d47 ("IB/hfi1: Add 16B trace support")
Reported-by: Kaike Wan <kaike.wan@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Platform configuration format version 4, that didn't use the file
size field, is not parsed by the host driver. Only version 5 is
supported. Add logic in parsing procedure to determine what format
is being used and allow to read data from version 4 files.
Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Andrzej Kacprowski <andrzej.kacprowski@intel.com>
Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
A Work Request (WR) posted after QP is flushed will not
get a flush completion.
Correct this problem by not allowing posting of WRs
after a QP is flushed.
Fixes: d374984179 ("i40iw: add files for iwarp interface")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If RTR WQE is posted and QP is flushed, a CQE is
incorrectly generated for the RTR WQE. Add code
to look for the RTR and not generate a CQE when
QP is flushed.
Fixes: 280cfc4b74 ("i40iw: user kernel shared files")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The ACK packets for an MPA request are ignored and
the MPA request is retransmitted if the MPA reply
is late or missing. Fix this by checking ack_rcvd
variable before retransmitting a packet.
Fixes: f27b4746f3 ("i40iw: add connection management code")
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
For the case where hr_qp->state == IB_QPS_RESET, an uninitialized
value in ret is being returned by function hns_roce_v2_query_qp.
Fix this by setting ret to 0 for this specific return condition.
Detected by CoverityScan, CID#1457203 ("Unitialized scalar variable")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The driver doesn't actually register an inetaddr notifier function,
so there is no need to unregister it on shutdown.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
After the loop in hns_roce_v1_mr_free_work_fn function, it is possible that
all qps will have been freed (in which case ne will be 0). If that
happens, then later in the function when we dereference hr_qp we will
get an exception. Check ne is not 0 to make sure we actually have an
hr_qp left to work on.
This patch fixes the smatch error as below:
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:1009 hns_roce_v1_mr_free_work_fn()
error: we previously assumed 'hr_qp' could be null
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When querying qp, It needs to return RoCE device ah_attr type
that may be specific to RoCE devices.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Only when the IB_QP_DEST_QPN flag of attr_mask is set is it valid to
assign the dest_qp_num into the dest_qp field of qp context.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When lp_qp_work is NULL, we should return ENOMEM. In order to do so,
we had to make some upper layer functions return a value instead
of being void type so we can propagate the error up the stack.
This patch fixes the smatch error as below:
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:918 hns_roce_v1_recreate_lp_qp()
error: potential null dereference 'lp_qp_work'. (kzalloc returns null)
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Put the code for checking the send doorbell status into a
separate function and call it from check_qp_db_process_status
to improve indenting and readability.
It fixes the warning from static checker:
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:3562 check_qp_db_process_status()
warn: inconsistent indenting.
Fixes: 5f110ac4be ("IB/hns: Fix for checkpatch.pl comment style)
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The value of max_rd_atomic and max_dest_rd_atomic in query_qp
are incorrect. It should be assigned by left shifting of
the bit in hip06 SoC.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
For messages sent from the host to fw that solicit a reply from fw,
the c4iw_wr_wait struct pointer is passed in the host->fw message, and
included in the fw->host fw6_msg reply. This allows the sender to wait
until the reply is received, and the code processing the ingress reply
to wake up the sender.
If c4iw_wait_for_reply() times out, however, we need to keep the
c4iw_wr_wait object around in case the reply eventually does arrive.
Otherwise we have touch-after-free bugs in the wake_up paths.
This was hit due to a bad kernel driver that blocked ingress processing
of cxgb4 for a long time, causing iw_cxgb4 timeouts, but eventually
resuming ingress processing and thus hitting the touch-after-free bug.
So I want to fix iw_cxgb4 such that we'll at least keep the wait object
around until the reply comes. If it never comes we leak a small amount of
memory, but if it does come late, we won't potentially crash the system.
So add a kref struct in the c4iw_wr_wait struct, and take a reference
before sending a message to FW that will generate a FW6 reply. And remove
the reference (and potentially free the wait object) when the reply
is processed.
The ep code also uses the wr_wait for non FW6 CPL messages and doesn't
embed the c4iw_wr_wait object in the message sent to firmware. So for
those cases we add c4iw_wake_up_noref().
The mr/mw, cq, and qp object create/destroy paths do need this reference
logic. For these paths, c4iw_ref_send_wait() is introduced to take the
wr_wait reference, send the msg to fw, and then wait for the reply.
So going forward, iw_cxgb4 either uses c4iw_ofld_send(),
c4iw_wait_for_reply() and c4iw_wake_up_noref() like is done in the some
of the endpoint logic, or c4iw_ref_send_wait() and c4iw_wake_up_deref()
(formerly c4iw_wake_up()) when sending messages with the c4iw_wr_wait
object pointer embedded in the message and resulting FW6 reply.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove the embedded c4iw_wr_wait object in preparation for correctly
handling timeouts.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove the local stack allocated c4iw_wr_wait object in preparation for
correctly handling timeouts.
Also cleaned up some error path unwind logic to make it more readable.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove the local stack allocated c4iw_wr_wait object in preparation for
correctly handling timeouts.
Also cleaned up some error path unwind logic to make it more readable.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove the local stack allocated c4iw_wr_wait object in preparation for
correctly handling timeouts.
Also refactored some code to simplify it and make errpath unwinding
more readable.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Variable j is being assigned to loop_j and then later being
assigned to a new value in for loops. The first initialization
is therefore redundant and can be removed.
Cleans up clang warning:
warning: Value stored to 'j' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The functions hns_roce_table_mhop_get, hns_roce_table_mhop_put,
hns_roce_cleanup_mhop_hem_table, hns_roce_v1_post_mbox,
hns_roce_cmq_setup_basic_desc, hns_roce_cmq_send,
hns_roce_cmq_query_hw_info are all local to the source and do
not need to be in global scope, so make them static.
Cleans up sparse warnings:
symbol 'hns_roce_table_mhop_get' was not declared. Should it be static?
symbol 'hns_roce_table_mhop_put' was not declared. Should it be static?
symbol 'hns_roce_cleanup_mhop_hem_table' was not declared. Should it be
static?
symbol 'hns_roce_v1_post_mbox' was not declared. Should it be static?
symbol 'hns_roce_cmq_setup_basic_desc' was not declared. Should it be
static?
symbol 'hns_roce_cmq_send' was not declared. Should it be static?
symbol 'hns_roce_cmq_query_hw_info' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
These lines were indented too far by mistake.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use setup_timer and mod_timer API instead of structure assignments.
This is done using Coccinelle and semantic patch used
for this as follows:
@@
expression x,y,z,a,b;
@@
-init_timer (&x);
+setup_timer (&x, y, z);
+mod_timer (&a, b);
-x.function = y;
-x.data = z;
-x.expires = b;
-add_timer(&a);
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Initialize the rdma_type (iWARP or RoCE) which is set according to
device configuration in qed.
Fixes: e6a38c54fa ("RDMA/qedr: Add support for registering an iWARP device")
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The IOCTL is a bit unwieldy. Refactor reset_ctxt() to be a bit more
manageable.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The IOCTL is a bit unwieldy. Refactor to a common pattern.
Refactor _RECV_CTRL, _POLL_TYPE, _ACK_EVENT and _SET_PKEY
IOCTLs to a common pattern.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The IOCTL is a bit unwieldy. Refactor to a common pattern.
Refactor _TID_INVAL_READ IOCTLs.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The IOCTL is a bit unwieldy. Refactor to a common pattern.
Refactor the _TID_FREE IOCTL.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The IOCTL is a bit unwieldy. Refactor to a common pattern.
Refactor the _TID_UPDATE IOCTL.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The IOCTL is a bit unwieldy. Refactor to a common pattern.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In preparation to refactoring get_base_info(), cleanup some
checkpatch issues.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The IOCTL is a bit unwieldy. Refactor to a common pattern.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The IOCTL is a bit unwieldy. Refactor to a common pattern.
Refactor the assign_ctxt() IOCTL.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
hfi1_rcd_get_by_index assumes that the given index is in the correct
range. In most cases this is correct because the index is bounded by
a loop. For these cases, adding a range check to the function is
redundant.
For the use case that is not bounded by the loop range, a _safe wrapper
function is needed to validate the index before accessing the rcd array.
Add a _safe wrapper to _get_by_index to validate the index range.
Update appropriate call sites with the new _safe function.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The etype field from the rhf can have more values than just
IB and BYPASS.
Extend the current tracing to report a symbolic for the etype
field for non-bypass packets. Bypass packets will continue to
report the l2.
As part of this fix the etype and the l2 are added to the tracing
struct and are available for trigger and filter operations.
Fixes: Commit 863cf89d47 ("IB/hfi1: Add 16B trace support")
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Following variables: hfi1_cpulist and hfi1_cpulist_count
are unused. Remove them.
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Calculating the offset to a context is done several times throughout
the code. Create a common inlined function for doing this
calculation.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
devdata->link_default is no longer variable
Maintain number of holes by moving dc_shutdown
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is no reason to set the default descriptor flag on every SDMA
engine initialization.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The HFI PCI IRQ code uses an obsolete PCI API. Update the code to use
the new PCI IRQ API and any necessary changes because of the new API.
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The QIB PCI IRQ code uses an obsolete PCI API. Updating the code to use
the new PCI IRQ API and any necessary changes because of the new API.
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove the debug trace statement in pin_sdma_pages() that
gets executed when there is a memory allocation failure as
the trace message doesn't help with debugging the memory
allocation failure.
Cc: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
