Commit Graph

1013479 Commits

Author SHA1 Message Date
David Awogbemila
e96b491a0f gve: Update mgmt_msix_idx if num_ntfy changes
If we do not get the expected number of vectors from
pci_enable_msix_range, we update priv->num_ntfy_blks but not
priv->mgmt_msix_idx. This patch fixes this so that priv->mgmt_msix_idx
is updated accordingly.

Fixes: f5cedc84a3 ("gve: Add transmit and receive support")
Signed-off-by: David Awogbemila <awogbemila@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17 15:38:40 -07:00
Catherine Sullivan
5aec55b46c gve: Check TX QPL was actually assigned
Correctly check the TX QPL was assigned and unassigned if
other steps in the allocation fail.

Fixes: f5cedc84a3 (gve: Add transmit and receive support)
Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David Awogbemila <awogbemila@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17 15:38:40 -07:00
Johannes Berg
1d482e666b netlink: disable IRQs for netlink_lock_table()
Syzbot reports that in mac80211 we have a potential deadlock
between our "local->stop_queue_reasons_lock" (spinlock) and
netlink's nl_table_lock (rwlock). This is because there's at
least one situation in which we might try to send a netlink
message with this spinlock held while it is also possible to
take the spinlock from a hardirq context, resulting in the
following deadlock scenario reported by lockdep:

       CPU0                    CPU1
       ----                    ----
  lock(nl_table_lock);
                               local_irq_disable();
                               lock(&local->queue_stop_reason_lock);
                               lock(nl_table_lock);
  <Interrupt>
    lock(&local->queue_stop_reason_lock);

This seems valid, we can take the queue_stop_reason_lock in
any kind of context ("CPU0"), and call ieee80211_report_ack_skb()
with the spinlock held and IRQs disabled ("CPU1") in some
code path (ieee80211_do_stop() via ieee80211_free_txskb()).

Short of disallowing netlink use in scenarios like these
(which would be rather complex in mac80211's case due to
the deep callchain), it seems the only fix for this is to
disable IRQs while nl_table_lock is held to avoid hitting
this scenario, this disallows the "CPU0" portion of the
reported deadlock.

Note that the writer side (netlink_table_grab()) already
disables IRQs for this lock.

Unfortunately though, this seems like a huge hammer, and
maybe the whole netlink table locking should be reworked.

Reported-by: syzbot+69ff9dff50dcfe14ddd4@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17 15:31:03 -07:00
Julian Wiedmann
444d7be953 net/smc: remove device from smcd_dev_list after failed device_add()
If the device_add() for a smcd_dev fails, there's no cleanup step that
rolls back the earlier list_add(). The device subsequently gets freed,
and we end up with a corrupted list.

Add some error handling that removes the device from the list.

Fixes: c6ba7c9ba4 ("net/smc: add base infrastructure for SMC-D and ISM")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17 15:27:22 -07:00
Johannes Berg
35d96e6318 bonding: init notify_work earlier to avoid uninitialized use
If bond_kobj_init() or later kzalloc() in bond_alloc_slave() fail,
then we call kobject_put() on the slave->kobj. This in turn calls
the release function slave_kobj_release() which will always try to
cancel_delayed_work_sync(&slave->notify_work), which shouldn't be
done on an uninitialized work struct.

Always initialize the work struct earlier to avoid problems here.

Syzbot bisected this down to a completely pointless commit, some
fault injection may have been at work here that caused the alloc
failure in the first place, which may interact badly with bisect.

Reported-by: syzbot+bfda097c12a00c8cae67@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17 15:24:20 -07:00
Krzysztof Kozlowski
3c81451974 MAINTAINERS: net: remove stale website link
The http://www.linuxfoundation.org/en/Net does not contain networking
subsystem description ("Nothing found").

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17 15:22:12 -07:00
Xin Long
04c26faa51 tipc: wait and exit until all work queues are done
On some host, a crash could be triggered simply by repeating these
commands several times:

  # modprobe tipc
  # tipc bearer enable media udp name UDP1 localip 127.0.0.1
  # rmmod tipc

  [] BUG: unable to handle kernel paging request at ffffffffc096bb00
  [] Workqueue: events 0xffffffffc096bb00
  [] Call Trace:
  []  ? process_one_work+0x1a7/0x360
  []  ? worker_thread+0x30/0x390
  []  ? create_worker+0x1a0/0x1a0
  []  ? kthread+0x116/0x130
  []  ? kthread_flush_work_fn+0x10/0x10
  []  ? ret_from_fork+0x35/0x40

When removing the TIPC module, the UDP tunnel sock will be delayed to
release in a work queue as sock_release() can't be done in rtnl_lock().
If the work queue is schedule to run after the TIPC module is removed,
kernel will crash as the work queue function cleanup_beareri() code no
longer exists when trying to invoke it.

To fix it, this patch introduce a member wq_count in tipc_net to track
the numbers of work queues in schedule, and  wait and exit until all
work queues are done in tipc_exit_net().

Fixes: d0f91938be ("tipc: add ip/udp media type")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17 14:07:48 -07:00
Taehee Yoo
020ef930b8 mld: fix panic in mld_newpack()
mld_newpack() doesn't allow to allocate high order page,
only order-0 allocation is allowed.
If headroom size is too large, a kernel panic could occur in skb_put().

Test commands:
    ip netns del A
    ip netns del B
    ip netns add A
    ip netns add B
    ip link add veth0 type veth peer name veth1
    ip link set veth0 netns A
    ip link set veth1 netns B

    ip netns exec A ip link set lo up
    ip netns exec A ip link set veth0 up
    ip netns exec A ip -6 a a 2001:db8:0::1/64 dev veth0
    ip netns exec B ip link set lo up
    ip netns exec B ip link set veth1 up
    ip netns exec B ip -6 a a 2001:db8:0::2/64 dev veth1
    for i in {1..99}
    do
        let A=$i-1
        ip netns exec A ip link add ip6gre$i type ip6gre \
	local 2001:db8:$A::1 remote 2001:db8:$A::2 encaplimit 100
        ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev ip6gre$i
        ip netns exec A ip link set ip6gre$i up

        ip netns exec B ip link add ip6gre$i type ip6gre \
	local 2001:db8:$A::2 remote 2001:db8:$A::1 encaplimit 100
        ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev ip6gre$i
        ip netns exec B ip link set ip6gre$i up
    done

Splat looks like:
kernel BUG at net/core/skbuff.c:110!
invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.12.0+ #891
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:skb_panic+0x15d/0x15f
Code: 92 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 00 ae 79 83
41 57 41 56 41 55 48 8b 54 24 a6 26 f9 ff <0f> 0b 48 8b 6c 24 20 89
34 24 e8 4a 4e 92 fe 8b 34 24 48 c7 c1 20
RSP: 0018:ffff88810091f820 EFLAGS: 00010282
RAX: 0000000000000089 RBX: ffff8881086e9000 RCX: 0000000000000000
RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed1020123efb
RBP: ffff888005f6eac0 R08: ffffed1022fc0031 R09: ffffed1022fc0031
R10: ffff888117e00187 R11: ffffed1022fc0030 R12: 0000000000000028
R13: ffff888008284eb0 R14: 0000000000000ed8 R15: 0000000000000ec0
FS:  0000000000000000(0000) GS:ffff888117c00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8b801c5640 CR3: 0000000033c2c006 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 ? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600
 ? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600
 skb_put.cold.104+0x22/0x22
 ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600
 ? rcu_read_lock_sched_held+0x91/0xc0
 mld_newpack+0x398/0x8f0
 ? ip6_mc_hdr.isra.26.constprop.46+0x600/0x600
 ? lock_contended+0xc40/0xc40
 add_grhead.isra.33+0x280/0x380
 add_grec+0x5ca/0xff0
 ? mld_sendpack+0xf40/0xf40
 ? lock_downgrade+0x690/0x690
 mld_send_initial_cr.part.34+0xb9/0x180
 ipv6_mc_dad_complete+0x15d/0x1b0
 addrconf_dad_completed+0x8d2/0xbb0
 ? lock_downgrade+0x690/0x690
 ? addrconf_rs_timer+0x660/0x660
 ? addrconf_dad_work+0x73c/0x10e0
 addrconf_dad_work+0x73c/0x10e0

Allowing high order page allocation could fix this problem.

Fixes: 72e09ad107 ("ipv6: avoid high order allocations")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17 14:05:50 -07:00
Zheyu Ma
9f6f852550 isdn: mISDN: netjet: Fix crash in nj_probe:
'nj_setup' in netjet.c might fail with -EIO and in this case
'card->irq' is initialized and is bigger than zero. A subsequent call to
'nj_release' will free the irq that has not been requested.

Fix this bug by deleting the previous assignment to 'card->irq' and just
keep the assignment before 'request_irq'.

The KASAN's log reveals it:

[    3.354615 ] WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1826
free_irq+0x100/0x480
[    3.355112 ] Modules linked in:
[    3.355310 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00144-g25a1298726e #13
[    3.355816 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.356552 ] RIP: 0010:free_irq+0x100/0x480
[    3.356820 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18
4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5
ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80
[    3.358012 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082
[    3.358357 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX:
0000000000000000
[    3.358814 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI:
00000000ffffffff
[    3.359272 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09:
0000000000000000
[    3.359732 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12:
0000000000000000
[    3.360195 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15:
ffff888104dc80a8
[    3.360652 ] FS:  0000000000000000(0000) GS:ffff88817bc00000(0000)
knlGS:0000000000000000
[    3.361170 ] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.361538 ] CR2: 0000000000000000 CR3: 000000000582e000 CR4:
00000000000006f0
[    3.362003 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[    3.362175 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[    3.362175 ] Call Trace:
[    3.362175 ]  nj_release+0x51/0x1e0
[    3.362175 ]  nj_probe+0x450/0x950
[    3.362175 ]  ? pci_device_remove+0x110/0x110
[    3.362175 ]  local_pci_probe+0x45/0xa0
[    3.362175 ]  pci_device_probe+0x12b/0x1d0
[    3.362175 ]  really_probe+0x2a9/0x610
[    3.362175 ]  driver_probe_device+0x90/0x1d0
[    3.362175 ]  ? mutex_lock_nested+0x1b/0x20
[    3.362175 ]  device_driver_attach+0x68/0x70
[    3.362175 ]  __driver_attach+0x124/0x1b0
[    3.362175 ]  ? device_driver_attach+0x70/0x70
[    3.362175 ]  bus_for_each_dev+0xbb/0x110
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  driver_attach+0x27/0x30
[    3.362175 ]  bus_add_driver+0x1eb/0x2a0
[    3.362175 ]  driver_register+0xa9/0x180
[    3.362175 ]  __pci_register_driver+0x82/0x90
[    3.362175 ]  ? w6692_init+0x38/0x38
[    3.362175 ]  nj_init+0x36/0x38
[    3.362175 ]  do_one_initcall+0x7f/0x3d0
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  ? rcu_read_lock_sched_held+0x4f/0x80
[    3.362175 ]  kernel_init_freeable+0x2aa/0x301
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  kernel_init+0x18/0x190
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ret_from_fork+0x1f/0x30
[    3.362175 ] Kernel panic - not syncing: panic_on_warn set ...
[    3.362175 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00144-g25a1298726e #13
[    3.362175 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.362175 ] Call Trace:
[    3.362175 ]  dump_stack+0xba/0xf5
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  panic+0x15a/0x3f2
[    3.362175 ]  ? __warn+0xf2/0x150
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  __warn+0x108/0x150
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  report_bug+0x119/0x1c0
[    3.362175 ]  handle_bug+0x3b/0x80
[    3.362175 ]  exc_invalid_op+0x18/0x70
[    3.362175 ]  asm_exc_invalid_op+0x12/0x20
[    3.362175 ] RIP: 0010:free_irq+0x100/0x480
[    3.362175 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18
4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5
ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80
[    3.362175 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082
[    3.362175 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX:
0000000000000000
[    3.362175 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI:
00000000ffffffff
[    3.362175 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09:
0000000000000000
[    3.362175 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12:
0000000000000000
[    3.362175 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15:
ffff888104dc80a8
[    3.362175 ]  ? vprintk+0x76/0x150
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  nj_release+0x51/0x1e0
[    3.362175 ]  nj_probe+0x450/0x950
[    3.362175 ]  ? pci_device_remove+0x110/0x110
[    3.362175 ]  local_pci_probe+0x45/0xa0
[    3.362175 ]  pci_device_probe+0x12b/0x1d0
[    3.362175 ]  really_probe+0x2a9/0x610
[    3.362175 ]  driver_probe_device+0x90/0x1d0
[    3.362175 ]  ? mutex_lock_nested+0x1b/0x20
[    3.362175 ]  device_driver_attach+0x68/0x70
[    3.362175 ]  __driver_attach+0x124/0x1b0
[    3.362175 ]  ? device_driver_attach+0x70/0x70
[    3.362175 ]  bus_for_each_dev+0xbb/0x110
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  driver_attach+0x27/0x30
[    3.362175 ]  bus_add_driver+0x1eb/0x2a0
[    3.362175 ]  driver_register+0xa9/0x180
[    3.362175 ]  __pci_register_driver+0x82/0x90
[    3.362175 ]  ? w6692_init+0x38/0x38
[    3.362175 ]  nj_init+0x36/0x38
[    3.362175 ]  do_one_initcall+0x7f/0x3d0
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  ? rcu_read_lock_sched_held+0x4f/0x80
[    3.362175 ]  kernel_init_freeable+0x2aa/0x301
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  kernel_init+0x18/0x190
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ret_from_fork+0x1f/0x30
[    3.362175 ] Dumping ftrace buffer:
[    3.362175 ]    (ftrace buffer empty)
[    3.362175 ] Kernel Offset: disabled
[    3.362175 ] Rebooting in 1 seconds..

Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17 14:03:21 -07:00
David S. Miller
3aa21e7994 Merge branch 'bnxt_en-fixes'
Michael Chan says:

====================
bnxt_en: 2 bug fixes.

The first one fixes a bug to properly identify some recently added HyperV
device IDs.  The second one fixes device context memory set up on systems
with 64K page size.

Please queue these for -stable as well.  Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17 13:59:45 -07:00
Michael Chan
702279d2ce bnxt_en: Fix context memory setup for 64K page size.
There was a typo in the code that checks for 64K BNXT_PAGE_SHIFT in
bnxt_hwrm_set_pg_attr().  Fix it and make the code more understandable
with a new macro BNXT_SET_CTX_PAGE_ATTR().

Fixes: 1b9394e5a2 ("bnxt_en: Configure context memory on new devices.")
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17 13:59:45 -07:00
Andy Gospodarek
ab21494be9 bnxt_en: Include new P5 HV definition in VF check.
Otherwise, some of the recently added HyperV VF IDs would not be
recognized as VF devices and they would not initialize properly.

Fixes: 7fbf359bb2 ("bnxt_en: Add PCI IDs for Hyper-V VF devices.")
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17 13:59:45 -07:00
Zhen Lei
28c66b6da4 net: bnx2: Fix error return code in bnx2_init_board()
Fix to return -EPERM from the error handling case instead of 0, as done
elsewhere in this function.

Fixes: b6016b7673 ("[BNX2]: New Broadcom gigabit network driver.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17 13:57:09 -07:00
Dongliang Mu
e0652f8bb4 NFC: nci: fix memory leak in nci_allocate_device
nfcmrvl_disconnect fails to free the hci_dev field in struct nci_dev.
Fix this by freeing hci_dev in nci_free_device.

BUG: memory leak
unreferenced object 0xffff888111ea6800 (size 1024):
  comm "kworker/1:0", pid 19, jiffies 4294942308 (age 13.580s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 60 fd 0c 81 88 ff ff  .........`......
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000004bc25d43>] kmalloc include/linux/slab.h:552 [inline]
    [<000000004bc25d43>] kzalloc include/linux/slab.h:682 [inline]
    [<000000004bc25d43>] nci_hci_allocate+0x21/0xd0 net/nfc/nci/hci.c:784
    [<00000000c59cff92>] nci_allocate_device net/nfc/nci/core.c:1170 [inline]
    [<00000000c59cff92>] nci_allocate_device+0x10b/0x160 net/nfc/nci/core.c:1132
    [<00000000006e0a8e>] nfcmrvl_nci_register_dev+0x10a/0x1c0 drivers/nfc/nfcmrvl/main.c:153
    [<000000004da1b57e>] nfcmrvl_probe+0x223/0x290 drivers/nfc/nfcmrvl/usb.c:345
    [<00000000d506aed9>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
    [<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554
    [<00000000f5009125>] driver_probe_device+0x84/0x100 drivers/base/dd.c:740
    [<000000000ce658ca>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:846
    [<000000007067d05f>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431
    [<00000000f8e13372>] __device_attach+0x122/0x250 drivers/base/dd.c:914
    [<000000009cf68860>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491
    [<00000000359c965a>] device_add+0x5be/0xc30 drivers/base/core.c:3109
    [<00000000086e4bd3>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2164
    [<00000000ca036872>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
    [<00000000d40d36f6>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
    [<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554

Reported-by: syzbot+19bcfc64a8df1318d1c3@syzkaller.appspotmail.com
Fixes: 11f54f2286 ("NFC: nci: Add HCI over NCI protocol support")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17 13:56:29 -07:00
Dan Carpenter
31db0dbd72 net: hso: check for allocation failure in hso_create_bulk_serial_device()
In current kernels, small allocations never actually fail so this
patch shouldn't affect runtime.

Originally this error handling code written with the idea that if
the "serial->tiocmget" allocation failed, then we would continue
operating instead of bailing out early.  But in later years we added
an unchecked dereference on the next line.

	serial->tiocmget->serial_state_notification = kzalloc();
        ^^^^^^^^^^^^^^^^^^

Since these allocations are never going fail in real life, this is
mostly a philosophical debate, but I think bailing out early is the
correct behavior that the user would want.  And generally it's safer to
bail as soon an error happens.

Fixes: af0de1303c ("usb: hso: obey DMA rules in tiocmget")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17 13:51:35 -07:00
Xin Long
b7df21cf1b tipc: skb_linearize the head skb when reassembling msgs
It's not a good idea to append the frag skb to a skb's frag_list if
the frag_list already has skbs from elsewhere, such as this skb was
created by pskb_copy() where the frag_list was cloned (all the skbs
in it were skb_get'ed) and shared by multiple skbs.

However, the new appended frag skb should have been only seen by the
current skb. Otherwise, it will cause use after free crashes as this
appended frag skb are seen by multiple skbs but it only got skb_get
called once.

The same thing happens with a skb updated by pskb_may_pull() with a
skb_cloned skb. Li Shuang has reported quite a few crashes caused
by this when doing testing over macvlan devices:

  [] kernel BUG at net/core/skbuff.c:1970!
  [] Call Trace:
  []  skb_clone+0x4d/0xb0
  []  macvlan_broadcast+0xd8/0x160 [macvlan]
  []  macvlan_process_broadcast+0x148/0x150 [macvlan]
  []  process_one_work+0x1a7/0x360
  []  worker_thread+0x30/0x390

  [] kernel BUG at mm/usercopy.c:102!
  [] Call Trace:
  []  __check_heap_object+0xd3/0x100
  []  __check_object_size+0xff/0x16b
  []  simple_copy_to_iter+0x1c/0x30
  []  __skb_datagram_iter+0x7d/0x310
  []  __skb_datagram_iter+0x2a5/0x310
  []  skb_copy_datagram_iter+0x3b/0x90
  []  tipc_recvmsg+0x14a/0x3a0 [tipc]
  []  ____sys_recvmsg+0x91/0x150
  []  ___sys_recvmsg+0x7b/0xc0

  [] kernel BUG at mm/slub.c:305!
  [] Call Trace:
  []  <IRQ>
  []  kmem_cache_free+0x3ff/0x400
  []  __netif_receive_skb_core+0x12c/0xc40
  []  ? kmem_cache_alloc+0x12e/0x270
  []  netif_receive_skb_internal+0x3d/0xb0
  []  ? get_rx_page_info+0x8e/0xa0 [be2net]
  []  be_poll+0x6ef/0xd00 [be2net]
  []  ? irq_exit+0x4f/0x100
  []  net_rx_action+0x149/0x3b0

  ...

This patch is to fix it by linearizing the head skb if it has frag_list
set in tipc_buf_append(). Note that we choose to do this before calling
skb_unshare(), as __skb_linearize() will avoid skb_copy(). Also, we can
not just drop the frag_list either as the early time.

Fixes: 45c8b7b175 ("tipc: allow non-linear first fragment buffer")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17 13:42:17 -07:00
Jonathan Davies
b81ac7841d net: cdc_eem: fix URL to CDC EEM 1.0 spec
The old URL is no longer accessible.

Signed-off-by: Jonathan Davies <jonathan.davies@nutanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14 15:17:18 -07:00
David S. Miller
a0c5393d5b Merge branch 'lockless-qdisc-packet-stuck'
Yunsheng Lin says:

====================
ix packet stuck problem for lockless qdisc

This patchset fixes the packet stuck problem mentioned in [1].

Patch 1: Add STATE_MISSED flag to fix packet stuck problem.
Patch 2: Fix a tx_action rescheduling problem after STATE_MISSED
         flag is added in patch 1.
Patch 3: Fix the significantly higher CPU consumption problem when
         multiple threads are competing on a saturated outgoing
         device.

V8: Change function name as suggested by Jakub and fix some typo
    in patch 3, adjust commit log in patch 2, and add Acked-by
    from Jakub.
V7: Fix netif_tx_wake_queue() data race noted by Jakub.
V6: Some performance optimization in patch 1 suggested by Jakub
    and drop NET_XMIT_DROP checking in patch 3.
V5: add patch 3 to fix the problem reported by Michal Kubecek.
V4: Change STATE_NEED_RESCHEDULE to STATE_MISSED and add patch 2.

[1]. https://lkml.org/lkml/2019/10/9/42
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14 15:05:46 -07:00
Yunsheng Lin
dcad9ee9e0 net: sched: fix tx action reschedule issue with stopped queue
The netdev qeueue might be stopped when byte queue limit has
reached or tx hw ring is full, net_tx_action() may still be
rescheduled if STATE_MISSED is set, which consumes unnecessary
cpu without dequeuing and transmiting any skb because the
netdev queue is stopped, see qdisc_run_end().

This patch fixes it by checking the netdev queue state before
calling qdisc_run() and clearing STATE_MISSED if netdev queue is
stopped during qdisc_run(), the net_tx_action() is rescheduled
again when netdev qeueue is restarted, see netif_tx_wake_queue().

As there is time window between netif_xmit_frozen_or_stopped()
checking and STATE_MISSED clearing, between which STATE_MISSED
may set by net_tx_action() scheduled by netif_tx_wake_queue(),
so set the STATE_MISSED again if netdev queue is restarted.

Fixes: 6b3ba9146f ("net: sched: allow qdiscs to handle locking")
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14 15:05:46 -07:00
Yunsheng Lin
102b55ee92 net: sched: fix tx action rescheduling issue during deactivation
Currently qdisc_run() checks the STATE_DEACTIVATED of lockless
qdisc before calling __qdisc_run(), which ultimately clear the
STATE_MISSED when all the skb is dequeued. If STATE_DEACTIVATED
is set before clearing STATE_MISSED, there may be rescheduling
of net_tx_action() at the end of qdisc_run_end(), see below:

CPU0(net_tx_atcion)  CPU1(__dev_xmit_skb)  CPU2(dev_deactivate)
          .                   .                     .
          .            set STATE_MISSED             .
          .           __netif_schedule()            .
          .                   .           set STATE_DEACTIVATED
          .                   .                qdisc_reset()
          .                   .                     .
          .<---------------   .              synchronize_net()
clear __QDISC_STATE_SCHED  |  .                     .
          .                |  .                     .
          .                |  .            some_qdisc_is_busy()
          .                |  .               return *false*
          .                |  .                     .
  test STATE_DEACTIVATED   |  .                     .
__qdisc_run() *not* called |  .                     .
          .                |  .                     .
   test STATE_MISS         |  .                     .
 __netif_schedule()--------|  .                     .
          .                   .                     .
          .                   .                     .

__qdisc_run() is not called by net_tx_atcion() in CPU0 because
CPU2 has set STATE_DEACTIVATED flag during dev_deactivate(), and
STATE_MISSED is only cleared in __qdisc_run(), __netif_schedule
is called at the end of qdisc_run_end(), causing tx action
rescheduling problem.

qdisc_run() called by net_tx_action() runs in the softirq context,
which should has the same semantic as the qdisc_run() called by
__dev_xmit_skb() protected by rcu_read_lock_bh(). And there is a
synchronize_net() between STATE_DEACTIVATED flag being set and
qdisc_reset()/some_qdisc_is_busy in dev_deactivate(), we can safely
bail out for the deactived lockless qdisc in net_tx_action(), and
qdisc_reset() will reset all skb not dequeued yet.

So add the rcu_read_lock() explicitly to protect the qdisc_run()
and do the STATE_DEACTIVATED checking in net_tx_action() before
calling qdisc_run_begin(). Another option is to do the checking in
the qdisc_run_end(), but it will add unnecessary overhead for
non-tx_action case, because __dev_queue_xmit() will not see qdisc
with STATE_DEACTIVATED after synchronize_net(), the qdisc with
STATE_DEACTIVATED can only be seen by net_tx_action() because of
__netif_schedule().

The STATE_DEACTIVATED checking in qdisc_run() is to avoid race
between net_tx_action() and qdisc_reset(), see:
commit d518d2ed86 ("net/sched: fix race between deactivation
and dequeue for NOLOCK qdisc"). As the bailout added above for
deactived lockless qdisc in net_tx_action() provides better
protection for the race without calling qdisc_run() at all, so
remove the STATE_DEACTIVATED checking in qdisc_run().

After qdisc_reset(), there is no skb in qdisc to be dequeued, so
clear the STATE_MISSED in dev_reset_queue() too.

Fixes: 6b3ba9146f ("net: sched: allow qdiscs to handle locking")
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
V8: Clearing STATE_MISSED before calling __netif_schedule() has
    avoid the endless rescheduling problem, but there may still
    be a unnecessary rescheduling, so adjust the commit log.
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14 15:05:46 -07:00
Yunsheng Lin
a90c57f2ce net: sched: fix packet stuck problem for lockless qdisc
Lockless qdisc has below concurrent problem:
    cpu0                 cpu1
     .                     .
q->enqueue                 .
     .                     .
qdisc_run_begin()          .
     .                     .
dequeue_skb()              .
     .                     .
sch_direct_xmit()          .
     .                     .
     .                q->enqueue
     .             qdisc_run_begin()
     .            return and do nothing
     .                     .
qdisc_run_end()            .

cpu1 enqueue a skb without calling __qdisc_run() because cpu0
has not released the lock yet and spin_trylock() return false
for cpu1 in qdisc_run_begin(), and cpu0 do not see the skb
enqueued by cpu1 when calling dequeue_skb() because cpu1 may
enqueue the skb after cpu0 calling dequeue_skb() and before
cpu0 calling qdisc_run_end().

Lockless qdisc has below another concurrent problem when
tx_action is involved:

cpu0(serving tx_action)     cpu1             cpu2
          .                   .                .
          .              q->enqueue            .
          .            qdisc_run_begin()       .
          .              dequeue_skb()         .
          .                   .            q->enqueue
          .                   .                .
          .             sch_direct_xmit()      .
          .                   .         qdisc_run_begin()
          .                   .       return and do nothing
          .                   .                .
 clear __QDISC_STATE_SCHED    .                .
 qdisc_run_begin()            .                .
 return and do nothing        .                .
          .                   .                .
          .            qdisc_run_end()         .

This patch fixes the above data race by:
1. If the first spin_trylock() return false and STATE_MISSED is
   not set, set STATE_MISSED and retry another spin_trylock() in
   case other CPU may not see STATE_MISSED after it releases the
   lock.
2. reschedule if STATE_MISSED is set after the lock is released
   at the end of qdisc_run_end().

For tx_action case, STATE_MISSED is also set when cpu1 is at the
end if qdisc_run_end(), so tx_action will be rescheduled again
to dequeue the skb enqueued by cpu2.

Clear STATE_MISSED before retrying a dequeuing when dequeuing
returns NULL in order to reduce the overhead of the second
spin_trylock() and __netif_schedule() calling.

Also clear the STATE_MISSED before calling __netif_schedule()
at the end of qdisc_run_end() to avoid doing another round of
dequeuing in the pfifo_fast_dequeue().

The performance impact of this patch, tested using pktgen and
dummy netdev with pfifo_fast qdisc attached:

 threads  without+this_patch   with+this_patch      delta
    1        2.61Mpps            2.60Mpps           -0.3%
    2        3.97Mpps            3.82Mpps           -3.7%
    4        5.62Mpps            5.59Mpps           -0.5%
    8        2.78Mpps            2.77Mpps           -0.3%
   16        2.22Mpps            2.22Mpps           -0.0%

Fixes: 6b3ba9146f ("net: sched: allow qdiscs to handle locking")
Acked-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14 15:05:46 -07:00
Jim Ma
974271e5ed tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT
In tls_sw_splice_read, checkout MSG_* is inappropriate, should use
SPLICE_*, update tls_wait_data to accept nonblock arguments instead
of flags for recvmsg and splice.

Fixes: c46234ebb4 ("tls: RX path for ktls")
Signed-off-by: Jim Ma <majinjing3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14 15:03:25 -07:00
Hoang Le
7501689135 Revert "net:tipc: Fix a double free in tipc_sk_mcast_rcv"
This reverts commit 6bf24dc0cc.
Above fix is not correct and caused memory leak issue.

Fixes: 6bf24dc0cc ("net:tipc: Fix a double free in tipc_sk_mcast_rcv")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Acked-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14 15:01:58 -07:00
David S. Miller
414ed7fe86 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Remove the flowtable hardware refresh state, fall back to the
   existing hardware pending state instead, from Roi Dayan.

2) Fix crash in pipapo avx2 lookup when FPU is in used from user
   context, from Stefano Brivio.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14 10:47:22 -07:00
Stefano Brivio
f0b3d33806 netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check, fallback to non-AVX2 version
Arturo reported this backtrace:

[709732.358791] WARNING: CPU: 3 PID: 456 at arch/x86/kernel/fpu/core.c:128 kernel_fpu_begin_mask+0xae/0xe0
[709732.358793] Modules linked in: binfmt_misc nft_nat nft_chain_nat nf_nat nft_counter nft_ct nf_tables nf_conntrack_netlink nfnetlink 8021q garp stp mrp llc vrf intel_rapl_msr intel_rapl_common skx_edac nfit libnvdimm ipmi_ssif x86_pkg_temp_thermal intel_powerclamp coretemp crc32_pclmul mgag200 ghash_clmulni_intel drm_kms_helper cec aesni_intel drm libaes crypto_simd cryptd glue_helper mei_me dell_smbios iTCO_wdt evdev intel_pmc_bxt iTCO_vendor_support dcdbas pcspkr rapl dell_wmi_descriptor wmi_bmof sg i2c_algo_bit watchdog mei acpi_ipmi ipmi_si button nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipmi_devintf ipmi_msghandler ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 dm_mod raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor sd_mod t10_pi crc_t10dif crct10dif_generic raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod ahci libahci tg3 libata xhci_pci libphy xhci_hcd ptp usbcore crct10dif_pclmul crct10dif_common bnxt_en crc32c_intel scsi_mod
[709732.358941]  pps_core i2c_i801 lpc_ich i2c_smbus wmi usb_common
[709732.358957] CPU: 3 PID: 456 Comm: jbd2/dm-0-8 Not tainted 5.10.0-0.bpo.5-amd64 #1 Debian 5.10.24-1~bpo10+1
[709732.358959] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.9.3 09/23/2020
[709732.358964] RIP: 0010:kernel_fpu_begin_mask+0xae/0xe0
[709732.358969] Code: ae 54 24 04 83 e3 01 75 38 48 8b 44 24 08 65 48 33 04 25 28 00 00 00 75 33 48 83 c4 10 5b c3 65 8a 05 5e 21 5e 76 84 c0 74 92 <0f> 0b eb 8e f0 80 4f 01 40 48 81 c7 00 14 00 00 e8 dd fb ff ff eb
[709732.358972] RSP: 0018:ffffbb9700304740 EFLAGS: 00010202
[709732.358976] RAX: 0000000000000001 RBX: 0000000000000003 RCX: 0000000000000001
[709732.358979] RDX: ffffbb9700304970 RSI: ffff922fe1952e00 RDI: 0000000000000003
[709732.358981] RBP: ffffbb9700304970 R08: ffff922fc868a600 R09: ffff922fc711e462
[709732.358984] R10: 000000000000005f R11: ffff922ff0b27180 R12: ffffbb9700304960
[709732.358987] R13: ffffbb9700304b08 R14: ffff922fc664b6c8 R15: ffff922fc664b660
[709732.358990] FS:  0000000000000000(0000) GS:ffff92371fec0000(0000) knlGS:0000000000000000
[709732.358993] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[709732.358996] CR2: 0000557a6655bdd0 CR3: 000000026020a001 CR4: 00000000007706e0
[709732.358999] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[709732.359001] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[709732.359003] PKRU: 55555554
[709732.359005] Call Trace:
[709732.359009]  <IRQ>
[709732.359035]  nft_pipapo_avx2_lookup+0x4c/0x1cba [nf_tables]
[709732.359046]  ? sched_clock+0x5/0x10
[709732.359054]  ? sched_clock_cpu+0xc/0xb0
[709732.359061]  ? record_times+0x16/0x80
[709732.359068]  ? plist_add+0xc1/0x100
[709732.359073]  ? psi_group_change+0x47/0x230
[709732.359079]  ? skb_clone+0x4d/0xb0
[709732.359085]  ? enqueue_task_rt+0x22b/0x310
[709732.359098]  ? bnxt_start_xmit+0x1e8/0xaf0 [bnxt_en]
[709732.359102]  ? packet_rcv+0x40/0x4a0
[709732.359121]  nft_lookup_eval+0x59/0x160 [nf_tables]
[709732.359133]  nft_do_chain+0x350/0x500 [nf_tables]
[709732.359152]  ? nft_lookup_eval+0x59/0x160 [nf_tables]
[709732.359163]  ? nft_do_chain+0x364/0x500 [nf_tables]
[709732.359172]  ? fib4_rule_action+0x6d/0x80
[709732.359178]  ? fib_rules_lookup+0x107/0x250
[709732.359184]  nft_nat_do_chain+0x8a/0xf2 [nft_chain_nat]
[709732.359193]  nf_nat_inet_fn+0xea/0x210 [nf_nat]
[709732.359202]  nf_nat_ipv4_out+0x14/0xa0 [nf_nat]
[709732.359207]  nf_hook_slow+0x44/0xc0
[709732.359214]  ip_output+0xd2/0x100
[709732.359221]  ? __ip_finish_output+0x210/0x210
[709732.359226]  ip_forward+0x37d/0x4a0
[709732.359232]  ? ip4_key_hashfn+0xb0/0xb0
[709732.359238]  ip_sublist_rcv_finish+0x4f/0x60
[709732.359243]  ip_sublist_rcv+0x196/0x220
[709732.359250]  ? ip_rcv_finish_core.isra.22+0x400/0x400
[709732.359255]  ip_list_rcv+0x137/0x160
[709732.359264]  __netif_receive_skb_list_core+0x29b/0x2c0
[709732.359272]  netif_receive_skb_list_internal+0x1a6/0x2d0
[709732.359280]  gro_normal_list.part.156+0x19/0x40
[709732.359286]  napi_complete_done+0x67/0x170
[709732.359298]  bnxt_poll+0x105/0x190 [bnxt_en]
[709732.359304]  ? irqentry_exit+0x29/0x30
[709732.359309]  ? asm_common_interrupt+0x1e/0x40
[709732.359315]  net_rx_action+0x144/0x3c0
[709732.359322]  __do_softirq+0xd5/0x29c
[709732.359329]  asm_call_irq_on_stack+0xf/0x20
[709732.359332]  </IRQ>
[709732.359339]  do_softirq_own_stack+0x37/0x40
[709732.359346]  irq_exit_rcu+0x9d/0xa0
[709732.359353]  common_interrupt+0x78/0x130
[709732.359358]  asm_common_interrupt+0x1e/0x40
[709732.359366] RIP: 0010:crc_41+0x0/0x1e [crc32c_intel]
[709732.359370] Code: ff ff f2 4d 0f 38 f1 93 a8 fe ff ff f2 4c 0f 38 f1 81 b0 fe ff ff f2 4c 0f 38 f1 8a b0 fe ff ff f2 4d 0f 38 f1 93 b0 fe ff ff <f2> 4c 0f 38 f1 81 b8 fe ff ff f2 4c 0f 38 f1 8a b8 fe ff ff f2 4d
[709732.359373] RSP: 0018:ffffbb97008dfcd0 EFLAGS: 00000246
[709732.359377] RAX: 000000000000002a RBX: 0000000000000400 RCX: ffff922fc591dd50
[709732.359379] RDX: ffff922fc591dea0 RSI: 0000000000000a14 RDI: ffffffffc00dddc0
[709732.359382] RBP: 0000000000001000 R08: 000000000342d8c3 R09: 0000000000000000
[709732.359384] R10: 0000000000000000 R11: ffff922fc591dff0 R12: ffffbb97008dfe58
[709732.359386] R13: 000000000000000a R14: ffff922fd2b91e80 R15: ffff922fef83fe38
[709732.359395]  ? crc_43+0x1e/0x1e [crc32c_intel]
[709732.359403]  ? crc32c_pcl_intel_update+0x97/0xb0 [crc32c_intel]
[709732.359419]  ? jbd2_journal_commit_transaction+0xaec/0x1a30 [jbd2]
[709732.359425]  ? irq_exit_rcu+0x3e/0xa0
[709732.359447]  ? kjournald2+0xbd/0x270 [jbd2]
[709732.359454]  ? finish_wait+0x80/0x80
[709732.359470]  ? commit_timeout+0x10/0x10 [jbd2]
[709732.359476]  ? kthread+0x116/0x130
[709732.359481]  ? kthread_park+0x80/0x80
[709732.359488]  ? ret_from_fork+0x1f/0x30
[709732.359494] ---[ end trace 081a19978e5f09f5 ]---

that is, nft_pipapo_avx2_lookup() uses the FPU running from a softirq
that interrupted a kthread, also using the FPU.

That's exactly the reason why irq_fpu_usable() is there: use it, and
if we can't use the FPU, fall back to the non-AVX2 version of the
lookup operation, i.e. nft_pipapo_lookup().

Reported-by: Arturo Borrero Gonzalez <arturo@netfilter.org>
Cc: <stable@vger.kernel.org> # 5.6.x
Fixes: 7400b06396 ("nft_set_pipapo: Introduce AVX2-based lookup implementation")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-05-14 01:42:52 +02:00
Roi Dayan
c07531c01d netfilter: flowtable: Remove redundant hw refresh bit
Offloading conns could fail for multiple reasons and a hw refresh bit is
set to try to reoffload it in next sw packet.
But it could be in some cases and future points that the hw refresh bit
is not set but a refresh could succeed.
Remove the hw refresh bit and do offload refresh if requested.
There won't be a new work entry if a work is already pending
anyway as there is the hw pending bit.

Fixes: 8b3646d6e0 ("net/sched: act_ct: Support refreshing the flow table entries")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-05-14 01:34:26 +02:00
Tao Liu
e4df1b0c24 openvswitch: meter: fix race when getting now_ms.
We have observed meters working unexpected if traffic is 3+Gbit/s
with multiple connections.

now_ms is not pretected by meter->lock, we may get a negative
long_delta_ms when another cpu updated meter->used, then:
    delta_ms = (u32)long_delta_ms;
which will be a large value.

    band->bucket += delta_ms * band->rate;
then we get a wrong band->bucket.

OpenVswitch userspace datapath has fixed the same issue[1] some
time ago, and we port the implementation to kernel datapath.

[1] https://patchwork.ozlabs.org/project/openvswitch/patch/20191025114436.9746-1-i.maximets@ovn.org/

Fixes: 96fbc13d7e ("openvswitch: Add meter infrastructure")
Signed-off-by: Tao Liu <thomas.liu@ucloud.cn>
Suggested-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:54:59 -07:00
Wei Yongjun
c7d8302478 net: korina: Fix return value check in korina_probe()
In case of error, the function devm_platform_ioremap_resource_byname()
returns ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().

Fixes: b4cd249a8c ("net: korina: Use devres functions")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:54:08 -07:00
Ayush Sawal
65e302a9bd cxgb4/ch_ktls: Clear resources when pf4 device is removed
This patch maintain the list of active tids and clear all the active
connection resources when DETACH notification comes.

Fixes: a8c16e8ed6 ("crypto/chcr: move nic TLS functionality to drivers/net")
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:44:54 -07:00
Christophe JAILLET
e1d027dd97 net: mdio: octeon: Fix some double free issues
'bus->mii_bus' has been allocated with 'devm_mdiobus_alloc_size()' in the
probe function. So it must not be freed explicitly or there will be a
double free.

Remove the incorrect 'mdiobus_free' in the error handling path of the
probe function and in remove function.

Suggested-By: Andrew Lunn <andrew@lunn.ch>
Fixes: 35d2aeac98 ("phy: mdio-octeon: Use devm_mdiobus_alloc_size()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:43:52 -07:00
Christophe JAILLET
a93a0a1587 net: mdio: thunder: Fix a double free issue in the .remove function
'bus->mii_bus' have been allocated with 'devm_mdiobus_alloc_size()' in the
probe function. So it must not be freed explicitly or there will be a
double free.

Remove the incorrect 'mdiobus_free' in the remove function.

Fixes: 379d7ac7ca ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 13:13:34 -07:00
Dan Carpenter
832ce924b1 chelsio/chtls: unlock on error in chtls_pt_recvmsg()
This error path needs to release some memory and call release_sock(sk);
before returning.

Fixes: 6919a8264a ("Crypto/chtls: add/delete TLS header in driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-12 14:30:00 -07:00
Krzysztof Kozlowski
4a64541f2c MAINTAINERS: nfc: include linux-nfc mailing list
Keep all NFC related patches in existing linux-nfc@lists.01.org mailing
list.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-12 14:11:22 -07:00
Krzysztof Kozlowski
8aa5713d8b MAINTAINERS: nfc: add Krzysztof Kozlowski as maintainer
The NFC subsystem is orphaned.  I am happy to spend some cycles to
review the patches, send pull requests and in general keep the NFC
subsystem running.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-12 14:11:22 -07:00
Krzysztof Kozlowski
ca14f9597f MAINTAINERS: nfc: drop Clément Perrochaud from NXP-NCI
Emails to Clément Perrochaud bounce with permanent error "user does not
exist", so remove Clément Perrochaud from NXP-NCI driver maintainers
entry.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-12 14:10:22 -07:00
David S. Miller
364642ae80 linux-can-fixes-for-5.13-20210512
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmCbfrsTHG1rbEBwZW5n
 dXRyb25peC5kZQAKCRCpyVqK+u3vqRUTB/9tORTrJ2x43hVPVVUqR50c4izuKyTi
 5q66+P7SBh4n0HHwaZnUBTyGEnC0u2UcdmtHTXswcBP1vSd2+PlP9HNwOAuQP+Ng
 uSzJEZ1usmOd8PCpN3WRBaQ8poCRaX2ifwc4s9xnOMUf5mZMx3vkgZgApMz5pScc
 IpqM09NdEsMkmGFpfttjPi32tnC2FpK9L3f2B1DzmSC8IaZyawI5jj+l9DKsxFoG
 mwlBx1IGqmICvAS5LvZWvypnDmSP652RaHQ2ZCp1oEzLhbCugKKIvyed1C0L0KGC
 A7YaAbR/OwMBdrSaWStANzBSFfNTPrXGCfOcKdIaoR8elR47D7qc/02l
 =QTJ/
 -----END PGP SIGNATURE-----

Merge tag 'linux-can-fixes-for-5.13-20210512' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2021-05-12

this is a pull request of a single patch for net/master.

The patch is by Norbert Slusarek and it fixes a race condition in the
CAN ISO-TP socket between isotp_bind() and isotp_setsockopt().
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-12 14:08:31 -07:00
Christophe JAILLET
9c1bb37f8c ptp: ocp: Fix a resource leak in an error handling path
If an error occurs after a successful 'pci_ioremap_bar()' call, it must be
undone by a corresponding 'pci_iounmap()' call, as already done in the
remove function.

Fixes: a7e1abad13 ("ptp: Add clock driver for the OpenCompute TimeCard.")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-12 14:06:33 -07:00
Dan Carpenter
e5cc361e21 octeontx2-pf: fix a buffer overflow in otx2_set_rxfh_context()
This function is called from ethtool_set_rxfh() and "*rss_context"
comes from the user.  Add some bounds checking to prevent memory
corruption.

Fixes: 81a4362016 ("octeontx2-pf: Add RSS multi group support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-12 14:05:50 -07:00
David S. Miller
6e80055766 Merge branch 'fec-fixes'
Joakim Zhang says:

====================
net: fixes for fec driver

Two small fixes for fec driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-12 14:01:50 -07:00
Fugang Duan
052fcc4531 net: fec: add defer probe for of_get_mac_address
If MAC address read from nvmem efuse by calling .of_get_mac_address(),
but nvmem efuse is registered later than the driver, then it
return -EPROBE_DEFER value. So modify the driver to support
defer probe when read MAC address from nvmem efuse.

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-12 14:01:50 -07:00
Fugang Duan
619fee9eb1 net: fec: fix the potential memory leak in fec_enet_init()
If the memory allocated for cbd_base is failed, it should
free the memory allocated for the queues, otherwise it causes
memory leak.

And if the memory allocated for the queues is failed, it can
return error directly.

Fixes: 59d0f74656 ("net: fec: init multi queue date structure")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-12 14:01:50 -07:00
Richard Sanger
171c3b1511 net: packetmmap: fix only tx timestamp on request
The packetmmap tx ring should only return timestamps if requested via
setsockopt PACKET_TIMESTAMP, as documented. This allows compatibility
with non-timestamp aware user-space code which checks
tp_status == TP_STATUS_AVAILABLE; not expecting additional timestamp
flags to be set in tp_status.

Fixes: b9c32fb271 ("packet: if hw/sw ts enabled in rx/tx ring, report which ts we got")
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Richard Sanger <rsanger@wand.net.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-12 14:00:04 -07:00
Michael Chan
aa473d6ceb bnxt_en: Fix and improve .ndo_features_check().
Jakub Kicinski pointed out that we need to handle ipv6 extension headers
and to explicitly check for supported tunnel types in
.ndo_features_check().

For ipv6 extension headers, the hardware supports up to 2 ext. headers
and each must be <= 64 bytes.  For tunneled packets, the supported
packets are UDP with supported VXLAN and Geneve ports, GRE, and IPIP.

v3: More improvements based on Alexander Duyck's valuable feedback -
    Remove the jump lable in bnxt_features_check() and restructure it
    so that the TCP/UDP is check is consolidated in bnxt_exthdr_check().

v2: Add missing step to check inner ipv6 header for UDP and GRE tunnels.
    Check TCP/UDP next header after skipping ipv6 ext headers for
    non-tunneled packets and for inner ipv6.
    (Both feedback from Alexander Duyck)

Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Fixes: 1698d600b3 ("bnxt_en: Implement .ndo_features_check().")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-12 13:58:46 -07:00
Paolo Abeni
098116e7e6 net: really orphan skbs tied to closing sk
If the owing socket is shutting down - e.g. the sock reference
count already dropped to 0 and only sk_wmem_alloc is keeping
the sock alive, skb_orphan_partial() becomes a no-op.

When forwarding packets over veth with GRO enabled, the above
causes refcount errors.

This change addresses the issue with a plain skb_orphan() call
in the critical scenario.

Fixes: 9adc89af72 ("net: let skb_orphan_partial wake-up waiters.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-12 13:48:58 -07:00
Norbert Slusarek
2b17c400ae can: isotp: prevent race between isotp_bind() and isotp_setsockopt()
A race condition was found in isotp_setsockopt() which allows to
change socket options after the socket was bound.
For the specific case of SF_BROADCAST support, this might lead to possible
use-after-free because can_rx_unregister() is not called.

Checking for the flag under the socket lock in isotp_bind() and taking
the lock in isotp_setsockopt() fixes the issue.

Fixes: 921ca574cd ("can: isotp: add SF_BROADCAST support for functional addressing")
Link: https://lore.kernel.org/r/trinity-e6ae9efa-9afb-4326-84c0-f3609b9b8168-1620773528307@3c-app-gmx-bs06
Reported-by: Norbert Slusarek <nslusarek@gmx.net>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Norbert Slusarek <nslusarek@gmx.net>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-05-12 08:52:47 +02:00
Alex Elder
440c3247cb net: ipa: memory region array is variable size
IPA configuration data includes an array of memory region
descriptors.  That was a fixed-size array at one time, but
at some point we started defining it such that it was only
as big as required for a given platform.  The actual number
of entries in the array is recorded in the configuration data
along with the array.

A loop in ipa_mem_config() still assumes the array has entries
for all defined memory region IDs.  As a result, this loop can
go past the end of the actual array and attempt to write
"canary" values based on nonsensical data.

Fix this, by stashing the number of entries in the array, and
using that rather than IPA_MEM_COUNT in the initialization loop
found in ipa_mem_config().

The only remaining use of IPA_MEM_COUNT is in a validation check
to ensure configuration data doesn't have too many entries.
That's fine for now.

Fixes: 3128aae8c4 ("net: ipa: redefine struct ipa_mem_data")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-11 16:22:37 -07:00
Shannon Nelson
bcbda3fc61 ionic: fix ptp support config breakage
When IONIC=y and PTP_1588_CLOCK=m were set in the .config file
the driver link failed with undefined references.

We add the dependancy
	depends on PTP_1588_CLOCK || !PTP_1588_CLOCK
to clear this up.

If PTP_1588_CLOCK=m, the depends limits IONIC to =m (or disabled).
If PTP_1588_CLOCK is disabled, IONIC can be any of y/m/n.

Fixes: 61db421da3 ("ionic: link in the new hw timestamp code")
Reported-by: kernel test robot <lkp@intel.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-11 16:20:27 -07:00
Paolo Abeni
29249eac52 mptcp: fix data stream corruption
Maxim reported several issues when forcing a TCP transparent proxy
to use the MPTCP protocol for the inbound connections. He also
provided a clean reproducer.

The problem boils down to 'mptcp_frag_can_collapse_to()' assuming
that only MPTCP will use the given page_frag.

If others - e.g. the plain TCP protocol - allocate page fragments,
we can end-up re-using already allocated memory for mptcp_data_frag.

Fix the issue ensuring that the to-be-expanded data fragment is
located at the current page frag end.

v1 -> v2:
 - added missing fixes tag (Mat)

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/178
Reported-and-tested-by: Maxim Galaganov <max@internet.ru>
Fixes: 18b683bff8 ("mptcp: queue data for mptcp level retransmission")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-11 16:19:17 -07:00
David S. Miller
df6f823703 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2021-05-11

The following pull-request contains BPF updates for your *net* tree.

We've added 13 non-merge commits during the last 8 day(s) which contain
a total of 21 files changed, 817 insertions(+), 382 deletions(-).

The main changes are:

1) Fix multiple ringbuf bugs in particular to prevent writable mmap of
   read-only pages, from Andrii Nakryiko & Thadeu Lima de Souza Cascardo.

2) Fix verifier alu32 known-const subregister bound tracking for bitwise
   operations and/or/xor, from Daniel Borkmann.

3) Reject trampoline attachment for functions with variable arguments,
   and also add a deny list of other forbidden functions, from Jiri Olsa.

4) Fix nested bpf_bprintf_prepare() calls used by various helpers by
   switching to per-CPU buffers, from Florent Revest.

5) Fix kernel compilation with BTF debug info on ppc64 due to pahole
   missing TCP-CC functions like cubictcp_init, from Martin KaFai Lau.

6) Add a kconfig entry to provide an option to disallow unprivileged
   BPF by default, from Daniel Borkmann.

7) Fix libbpf compilation for older libelf when GELF_ST_VISIBILITY()
   macro is not available, from Arnaldo Carvalho de Melo.

8) Migrate test_tc_redirect to test_progs framework as prep work
   for upcoming skb_change_head() fix & selftest, from Jussi Maki.

9) Fix a libbpf segfault in add_dummy_ksym_var() if BTF is not
   present, from Ian Rogers.

10) Fix tx_only micro-benchmark in xdpsock BPF sample with proper frame
    size, from Magnus Karlsson.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-11 16:05:56 -07:00
David S. Miller
9fe37a80c9 Several security issues in the 802.11 implementations were found by
Mathy Vanhoef (New York University Abu Dhabi), and this contains the
 fixes developed for mac80211 and specifically Qualcomm drivers, I'm
 sending this together (as agreed with Kalle) to have just a single
 set of patches for now. We don't know about other vendors though.
 
 More details in the patch posting:
 https://lore.kernel.org/r/20210511180259.159598-1-johannes@sipsolutions.net
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAmCazMMACgkQB8qZga/f
 l8RDoQ/+NrkL1FhPIflJTVbemLE7myXsLoMqsiCBFuM7tR3wLyEmLzGz+Z9hsJBW
 qp4THuRXRjjDHES5hel6a/g0EcShxxeq9cyD3vySeL+w2oyEhBcxB56LWEBteZwW
 qX10ZahuUcG3GZlQm7/vG8cTu8rT4MLcDRHybkVemWk7YOzaksPFUPNkF3Wt5F2e
 r96DpFXYQGCzHqKjpkP3Fz89fzmWfbEpMd4DCpEKdEYMm1RPeAzsSa+K4t/TaUSq
 Z4qTqj/DEudxXRDD7yYmF/mLtEItzQY6d9lEaPU30Y9MDIPKZBOKaKV7cuwbfZEX
 TLQPfIM+QAPgQKYBQ/1qaWp5HLmFL8tJBkkDGlbsXDJoC+K7YzrX0k4pOKGy1D2s
 VDU31T28EZ90Oo5tWg299sTWvZ05h0+T1YpB2+sMQLv1kN4im16ZtSXaKQZ+nZ5Y
 mIiesnQYd3diwPZXgwgVDNt71pNFHyQIrSpsunTSHJfqZ0dlJpIfEWsCSCiw+R7A
 eJS7OqOUanrVSd+LRv9P/NpPNX2K0QXoq94aVgDjObR7vqK1Daj5Kkx87NtnAoKL
 blrnptHYgGoKZ6T5qF18Ki9d5SzXGlXkDH32OaYfbRl8lH+RFfwTze2kk/jWmokr
 okfh7hMsjDx9TWGJwqLwhg1D+dmEd1NopSWXePtkGCM8oLrttYs=
 =cCe3
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-for-net-2021-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
pull-request: mac80211 2021-05-11

So exciting times, for the first pull request for fixes I
have a bunch of security things that have been under embargo
for a while - see more details in the tag below, and at the
patch posting message I linked to.

I organized with Kalle to just have a single set of fixes
for mac80211 and ath10k/ath11k, we don't know about any of
the other vendors (the mac80211 + already released firmware
is sufficient to fix iwlwifi.)

Please pull and let me know if there's any problem.

Several security issues in the 802.11 implementations were found by
Mathy Vanhoef (New York University Abu Dhabi), and this contains the
fixes developed for mac80211 and specifically Qualcomm drivers, I'm
sending this together (as agreed with Kalle) to have just a single
set of patches for now. We don't know about other vendors though.

More details in the patch posting:
https://lore.kernel.org/r/20210511180259.159598-1-johannes@sipsolutions.net
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-11 16:03:45 -07:00