Pull thermal control updates from Rafael Wysocki:
"These add a new driver for Renesas RZ/G2L TSU, update a few existing
thermal control drivers and clean up the tmon utility.
Specifics:
- Add new TSU driver and DT bindings for the Renesas RZ/G2L platform
(Biju Das).
- Fix missing check when calling reset_control_deassert() in the
rz2gl thermal driver (Biju Das).
- In preparation for FORTIFY_SOURCE performing compile-time and
run-time field bounds checking for memcpy(), avoid intentionally
writing across neighboring fields in the int340x thermal control
driver (Kees Cook).
- Fix RFIM mailbox write commands handling in the int340x thermal
control driver (Sumeet Pawnikar).
- Fix PM issue occurring in the iMX thermal control driver during
suspend/resume by implementing PM runtime support in it (Oleksij
Rempel).
- Add 'const' annotation to thermal_cooling_ops in the Intel
powerclamp driver (Rikard Falkeborn).
- Fix missing ADC bit set in the iMX8MP thermal driver to enable the
sensor (Paul Gerber).
- Drop unused local variable definition from tmon (ran jianping)"
* tag 'thermal-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/int340x: Fix RFIM mailbox write commands
thermal/drivers/rz2gl: Add error check for reset_control_deassert()
thermal/drivers/imx8mm: Enable ADC when enabling monitor
thermal/drivers: Add TSU driver for RZ/G2L
dt-bindings: thermal: Document Renesas RZ/G2L TSU
thermal/drivers/intel_powerclamp: Constify static thermal_cooling_device_ops
thermal/drivers/imx: Implement runtime PM support
thermal: tools: tmon: remove unneeded local variable
thermal: int340x: Use struct_group() for memcpy() region
Pull networking updates from Jakub Kicinski:
"Core
----
- Defer freeing TCP skbs to the BH handler, whenever possible, or at
least perform the freeing outside of the socket lock section to
decrease cross-CPU allocator work and improve latency.
- Add netdevice refcount tracking to locate sources of netdevice and
net namespace refcount leaks.
- Make Tx watchdog less intrusive - avoid pausing Tx and restarting
all queues from a single CPU removing latency spikes.
- Various small optimizations throughout the stack from Eric Dumazet.
- Make netdev->dev_addr[] constant, force modifications to go via
appropriate helpers to allow us to keep addresses in ordered data
structures.
- Replace unix_table_lock with per-hash locks, improving performance
of bind() calls.
- Extend skb drop tracepoint with a drop reason.
- Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
BPF
---
- New helpers:
- bpf_find_vma(), find and inspect VMAs for profiling use cases
- bpf_loop(), runtime-bounded loop helper trading some execution
time for much faster (if at all converging) verification
- bpf_strncmp(), improve performance, avoid compiler flakiness
- bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
for tracing programs, all inlined by the verifier
- Support BPF relocations (CO-RE) in the kernel loader.
- Further the support for BTF_TYPE_TAG annotations.
- Allow access to local storage in sleepable helpers.
- Convert verifier argument types to a composable form with different
attributes which can be shared across types (ro, maybe-null).
- Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
creating new, extensible ones where missing and deprecating those
to be removed.
Protocols
---------
- WiFi (mac80211/cfg80211):
- notify user space about long "come back in N" AP responses,
allow it to react to such temporary rejections
- allow non-standard VHT MCS 10/11 rates
- use coarse time in airtime fairness code to save CPU cycles
- Bluetooth:
- rework of HCI command execution serialization to use a common
queue and work struct, and improve handling errors reported in
the middle of a batch of commands
- rework HCI event handling to use skb_pull_data, avoiding packet
parsing pitfalls
- support AOSP Bluetooth Quality Report
- SMC:
- support net namespaces, following the RDMA model
- improve connection establishment latency by pre-clearing buffers
- introduce TCP ULP for automatic redirection to SMC
- Multi-Path TCP:
- support ioctls: SIOCINQ, OUTQ, and OUTQNSD
- support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
- support cmsgs: TCP_INQ
- improvements in the data scheduler (assigning data to subflows)
- support fastclose option (quick shutdown of the full MPTCP
connection, similar to TCP RST in regular TCP)
- MCTP (Management Component Transport) over serial, as defined by
DMTF spec DSP0253 - "MCTP Serial Transport Binding".
Driver API
----------
- Support timestamping on bond interfaces in active/passive mode.
- Introduce generic phylink link mode validation for drivers which
don't have any quirks and where MAC capability bits fully express
what's supported. Allow PCS layer to participate in the validation.
Convert a number of drivers.
- Add support to set/get size of buffers on the Rx rings and size of
the tx copybreak buffer via ethtool.
- Support offloading TC actions as first-class citizens rather than
only as attributes of filters, improve sharing and device resource
utilization.
- WiFi (mac80211/cfg80211):
- support forwarding offload (ndo_fill_forward_path)
- support for background radar detection hardware
- SA Query Procedures offload on the AP side
New hardware / drivers
----------------------
- tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
real-time requirements for isochronous communication with protocols
like OPC UA Pub/Sub.
- Qualcomm BAM-DMUX WWAN - driver for data channels of modems
integrated into many older Qualcomm SoCs, e.g. MSM8916 or MSM8974
(qcom_bam_dmux).
- Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch driver
with support for bridging, VLANs and multicast forwarding
(lan966x).
- iwlmei driver for co-operating between Intel's WiFi driver and
Intel's Active Management Technology (AMT) devices.
- mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
- Bluetooth:
- MediaTek MT7921 SDIO devices
- Foxconn MT7922A
- Realtek RTL8852AE
Drivers
-------
- Significantly improve performance in the datapaths of: lan78xx,
ax88179_178a, lantiq_xrx200, bnxt.
- Intel Ethernet NICs:
- igb: support PTP/time PEROUT and EXTTS SDP functions on
82580/i354/i350 adapters
- ixgbevf: new PF -> VF mailbox API which avoids the risk of
mailbox corruption with ESXi
- iavf: support configuration of VLAN features of finer
granularity, stacked tags and filtering
- ice: PTP support for new E822 devices with sub-ns precision
- ice: support firmware activation without reboot
- Mellanox Ethernet NICs (mlx5):
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- support TC forwarding when tunnel encap and decap happen between
two ports of the same NIC
- dynamically size and allow disabling various features to save
resources for running in embedded / SmartNIC scenarios
- Broadcom Ethernet NICs (bnxt):
- use page frag allocator to improve Rx performance
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- Other Ethernet NICs:
- amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
- Microsoft cloud/virtual NIC (mana):
- add XDP support (PASS, DROP, TX)
- Mellanox Ethernet switches (mlxsw):
- initial support for Spectrum-4 ASICs
- VxLAN with IPv6 underlay
- Marvell Ethernet switches (prestera):
- support flower flow templates
- add basic IP forwarding support
- NXP embedded Ethernet switches (ocelot & felix):
- support Per-Stream Filtering and Policing (PSFP)
- enable cut-through forwarding between ports by default
- support FDMA to improve packet Rx/Tx to CPU
- Other embedded switches:
- hellcreek: improve trapping management (STP and PTP) packets
- qca8k: support link aggregation and port mirroring
- Qualcomm 802.11ax WiFi (ath11k):
- qca6390, wcn6855: enable 802.11 power save mode in station mode
- BSS color change support
- WCN6855 hw2.1 support
- 11d scan offload support
- scan MAC address randomization support
- full monitor mode, only supported on QCN9074
- qca6390/wcn6855: report signal and tx bitrate
- qca6390: rfkill support
- qca6390/wcn6855: regdb.bin support
- Intel WiFi (iwlwifi):
- support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
in cooperation with the BIOS
- support for Optimized Connectivity Experience (OCE) scan
- support firmware API version 68
- lots of preparatory work for the upcoming Bz device family
- MediaTek WiFi (mt76):
- Specific Absorption Rate (SAR) support
- mt7921: 160 MHz channel support
- RealTek WiFi (rtw88):
- Specific Absorption Rate (SAR) support
- scan offload
- Other WiFi NICs
- ath10k: support fetching (pre-)calibration data from nvmem
- brcmfmac: configure keep-alive packet on suspend
- wcn36xx: beacon filter support"
* tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2048 commits)
tcp: tcp_send_challenge_ack delete useless param `skb`
net/qla3xxx: Remove useless DMA-32 fallback configuration
rocker: Remove useless DMA-32 fallback configuration
hinic: Remove useless DMA-32 fallback configuration
lan743x: Remove useless DMA-32 fallback configuration
net: enetc: Remove useless DMA-32 fallback configuration
cxgb4vf: Remove useless DMA-32 fallback configuration
cxgb4: Remove useless DMA-32 fallback configuration
cxgb3: Remove useless DMA-32 fallback configuration
bnx2x: Remove useless DMA-32 fallback configuration
et131x: Remove useless DMA-32 fallback configuration
be2net: Remove useless DMA-32 fallback configuration
vmxnet3: Remove useless DMA-32 fallback configuration
bna: Simplify DMA setting
net: alteon: Simplify DMA setting
myri10ge: Simplify DMA setting
qlcnic: Simplify DMA setting
net: allwinner: Fix print format
page_pool: remove spinlock in page_pool_refill_alloc_cache()
amt: fix wrong return type of amt_send_membership_update()
...
Pull media updates from Mauro Carvalho Chehab:
- New sensor driver: ov5693
- A new driver for STM32 Chrom-ART Accelerator
- Added V4L2 core helper functions for VP9 codec
- Hantro driver has gained support for VP9 codecs
- Added support for Maxim MAX96712 Quad GMSL2 Deserializer
- The staging atomisp driver has gained lots of improvements, fixes and
cleanups. It now works with userptr
- Lots of random driver improvements as usual
* tag 'media/v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (397 commits)
media: ipu3-cio2: Add support for instantiating i2c-clients for VCMs
media: ipu3-cio2: Call cio2_bridge_init() before anything else
media: ipu3-cio2: Defer probing until the PMIC is fully setup
media: hantro: Add support for Allwinner H6
media: dt-bindings: allwinner: document H6 Hantro G2 binding
media: hantro: Convert imx8m_vpu_g2_irq to helper
media: hantro: move postproc enablement for old cores
media: hantro: vp9: add support for legacy register set
media: hantro: vp9: use double buffering if needed
media: hantro: add support for reset lines
media: hantro: Fix probe func error path
media: i2c: hi846: use pm_runtime_force_suspend/resume for system suspend
media: i2c: hi846: check return value of regulator_bulk_disable()
media: hi556: Support device probe in non-zero ACPI D state
media: ov5675: Support device probe in non-zero ACPI D state
media: imx208: Support device probe in non-zero ACPI D state
media: ov2740: support device probe in non-zero ACPI D state
media: ov5670: Support device probe in non-zero ACPI D state
media: ov8856: support device probe in non-zero ACPI D state
media: ov8865: Disable only enabled regulators on error path
...
Pull drm updates from Dave Airlie:
"Highlights are support for privacy screens found in new laptops, a
bunch of nomodeset refactoring, and i915 enables ADL-P systems by
default, while starting to add RPL-S support.
vmwgfx adds GEM and support for OpenGL 4.3 features in userspace.
Lots of internal refactorings around dma reservations, and lots of
driver refactoring as well.
Summary:
core:
- add privacy screen support
- move nomodeset option into drm subsystem
- clean up nomodeset handling in drivers
- make drm_irq.c legacy
- fix stack_depot name conflicts
- remove DMA_BUF_SET_NAME ioctl restrictions
- sysfs: send hotplug event
- replace several DRM_* logging macros with drm_*
- move hashtable to legacy code
- add error return from gem_create_object
- cma-helper: improve interfaces, drop CONFIG_DRM_KMS_CMA_HELPER
- kernel.h related include cleanups
- support XRGB2101010 source buffers
ttm:
- don't include drm hashtable
- stop pruning fences after wait
- documentation updates
dma-buf:
- add dma_resv selftest
- add debugfs helpers
- remove dma_resv_get_excl_unlocked
- documentation
- make fences mandatory in dma_resv_add_excl_fence
dp:
- add link training delay helpers
gem:
- link shmem/cma helpers into separate modules
- use dma_resv iteratior
- import dma-buf namespace into gem helper modules
scheduler:
- fence grab fix
- lockdep fixes
bridge:
- switch to managed MIPI DSI helpers
- register and attach during probe fixes
- convert to YAML in several places.
panel:
- add bunch of new panesl
simpledrm:
- support FB_DAMAGE_CLIPS
- support virtual screen sizes
- add Apple M1 support
amdgpu:
- enable seamless boot for DCN 3.01
- runtime PM fixes
- use drm_kms_helper_connector_hotplug_event
- get all fences at once
- use generic drm fb helpers
- PSR/DPCD/LTTPR/DSC/PM/RAS/OLED/SRIOV fixes
- add smart trace buffer (STB) for supported GPUs
- display debugfs entries
- new SMU debug option
- Documentation update
amdkfd:
- IP discovery enumeration refactor
- interface between driver fixes
- SVM fixes
- kfd uapi header to define some sysfs bitfields.
i915:
- support VESA panel backlights
- enable ADL-P by default
- add eDP privacy screen support
- add Raptor Lake S (RPL-S) support
- DG2 page table support
- lots of GuC/HuC fw refactoring
- refactored i915->gt interfaces
- CD clock squashing support
- enable 10-bit gamma support
- update ADL-P DMC fw to v2.14
- enable runtime PM autosuspend by default
- ADL-P DSI support
- per-lane DP drive settings for ICL+
- add support for pipe C/D DMC firmware
- Atomic gamma LUT updates
- remove CCS FB stride restrictions on ADL-P
- VRR platform support for display 11
- add support for display audio codec keepalive
- lots of display refactoring
- fix runtime PM handling during PXP suspend
- improved eviction performance with async TTM moves
- async VMA unbinding improvements
- VMA locking refactoring
- improved error capture robustness
- use per device iommu checks
- drop bits stealing from i915_sw_fence function ptr
- remove dma_resv_prune
- add IC cache invalidation on DG2
nouveau:
- crc fixes
- validate LUTs in atomic check
- set HDMI AVI RGB quant to full
tegra:
- buffer objects reworks for dma-buf compat
- NVDEC driver uAPI support
- power management improvements
etnaviv:
- IOMMU enabled system support
- fix > 4GB command buffer mapping
- close a DoS vector
- fix spurious GPU resets
ast:
- fix i2c initialization
rcar-du:
- DSI output support
exynos:
- replace legacy gpio interface
- implement generic GEM object mmap
msm:
- dpu plane state cleanup in prep for multirect
- dpu debugfs cleanups
- dp support for sc7280
- a506 support
- removal of struct_mutex
- remove old eDP sub-driver
anx7625:
- support MIPI DSI input
- support HDMI audio
- fix reading EDID
lvds:
- fix bridge DT bindings
megachips:
- probe both bridges before registering
dw-hdmi:
- allow interlace on bridge
ps8640:
- enable runtime PM
- support aux-bus
tx358768:
- enable reference clock
- add pulse mode support
ti-sn65dsi86:
- use regmap bulk write
- add PWM support
etnaviv:
- get all fences at once
gma500:
- gem object cleanups
kmb:
- enable fb console
radeon:
- use dma_resv_wait_timeout
rockchip:
- add DSP hold timeout
- suspend/resume fixes
- PLL clock fixes
- implement mmap in GEM object functions
- use generic fbdev emulation
sun4i:
- use CMA helpers without vmap support
vc4:
- fix HDMI-CEC hang with display is off
- power on HDMI controller while disabling
- support 4K@60Hz modes
- support 10-bit YUV 4:2:0 output
vmwgfx:
- fix leak on probe errors
- fail probing on broken hosts
- new placement for MOB page tables
- hide internal BOs from userspace
- implement GEM support
- implement GL 4.3 support
virtio:
- overflow fixes
xen:
- implement mmap as GEM object function
omapdrm:
- fix scatterlist export
- support virtual planes
mediatek:
- MT8192 support
- CMDQ refinement"
* tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm: (1241 commits)
drm/amdgpu: no DC support for headless chips
drm/amd/display: fix dereference before NULL check
drm/amdgpu: always reset the asic in suspend (v2)
drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform
drm/amd/display: Fix the uninitialized variable in enable_stream_features()
drm/amdgpu: fix runpm documentation
amdgpu/pm: Make sysfs pm attributes as read-only for VFs
drm/amdgpu: save error count in RAS poison handler
drm/amdgpu: drop redundant semicolon
drm/amd/display: get and restore link res map
drm/amd/display: support dynamic HPO DP link encoder allocation
drm/amd/display: access hpo dp link encoder only through link resource
drm/amd/display: populate link res in both detection and validation
drm/amd/display: define link res and make it accessible to all link interfaces
drm/amd/display: 3.2.167
drm/amd/display: [FW Promotion] Release 0.0.98
drm/amd/display: Undo ODM combine
drm/amd/display: Add reg defs for DCN303
drm/amd/display: Changed pipe split policy to allow for multi-display pipe split
drm/amd/display: Set optimize_pwr_state for DCN31
...
Pull EDAC updates from Borislav Petkov:
- Add support for version 3 of the Synopsys DDR controller to
synopsys_edac
- Add support for DRR5 and new models 0x10-0x1f and 0x50-0x5f of AMD
family 0x19 CPUs to amd64_edac
- The usual set of fixes and cleanups
* tag 'edac_updates_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Add support for family 19h, models 50h-5fh
EDAC/sb_edac: Remove redundant initialization of variable rc
RAS/CEC: Remove a repeated 'an' in a comment
EDAC/amd64: Add support for AMD Family 19h Models 10h-1Fh and A0h-AFh
EDAC: Add RDDR5 and LRDDR5 memory types
EDAC/sifive: Fix non-kernel-doc comment
dt-bindings: memory: Add entry for version 3.80a
EDAC/synopsys: Enable the driver on Intel's N5X platform
EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR
EDAC/synopsys: Use the quirk for version instead of ddr version
Pull arm64 updates from Catalin Marinas:
- KCSAN enabled for arm64.
- Additional kselftests to exercise the syscall ABI w.r.t. SVE/FPSIMD.
- Some more SVE clean-ups and refactoring in preparation for SME
support (scalable matrix extensions).
- BTI clean-ups (SYM_FUNC macros etc.)
- arm64 atomics clean-up and codegen improvements.
- HWCAPs for FEAT_AFP (alternate floating point behaviour) and
FEAT_RPRESS (increased precision of reciprocal estimate and
reciprocal square root estimate).
- Use SHA3 instructions to speed-up XOR.
- arm64 unwind code refactoring/unification.
- Avoid DC (data cache maintenance) instructions when DCZID_EL0.DZP ==
1 (potentially set by a hypervisor; user-space already does this).
- Perf updates for arm64: support for CI-700, HiSilicon PCIe PMU,
Marvell CN10K LLC-TAD PMU, miscellaneous clean-ups.
- Other fixes and clean-ups; highlights: fix the handling of erratum
1418040, correct the calculation of the nomap region boundaries,
introduce io_stop_wc() mapped to the new DGH instruction (data
gathering hint).
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
arm64: Use correct method to calculate nomap region boundaries
arm64: Drop outdated links in comments
arm64: perf: Don't register user access sysctl handler multiple times
drivers: perf: marvell_cn10k: fix an IS_ERR() vs NULL check
perf/smmuv3: Fix unused variable warning when CONFIG_OF=n
arm64: errata: Fix exec handling in erratum 1418040 workaround
arm64: Unhash early pointer print plus improve comment
asm-generic: introduce io_stop_wc() and add implementation for ARM64
arm64: Ensure that the 'bti' macro is defined where linkage.h is included
arm64: remove __dma_*_area() aliases
docs/arm64: delete a space from tagged-address-abi
arm64: Enable KCSAN
kselftest/arm64: Add pidbench for floating point syscall cases
arm64/fp: Add comments documenting the usage of state restore functions
kselftest/arm64: Add a test program to exercise the syscall ABI
kselftest/arm64: Allow signal tests to trigger from a function
kselftest/arm64: Parameterise ptrace vector length information
arm64/sve: Minor clarification of ABI documentation
arm64/sve: Generalise vector length configuration prctl() for SME
arm64/sve: Make sysctl interface for SVE reusable by SME
...
Pull RISC-V SoC updates from Arnd Bergmann:
"Add support for StarFive JH7100 RISC-V SoC
This adds support for the StarFive JH7100, including the necessary
device drivers and DT files for the BeagleV Starlight prototype board,
with additional boards to be added later. This SoC promises to be the
first usable low-cost platform for RISC-V.
I've taken this through the SoC tree in the anticipation of adding a
few other Arm based SoCs as well, but those did not pass the review in
time, so it's only this one"
* tag 'newsoc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
reset: starfive-jh7100: Fix 32bit compilation
RISC-V: Add BeagleV Starlight Beta device tree
RISC-V: Add initial StarFive JH7100 device tree
serial: 8250_dw: Add StarFive JH7100 quirk
dt-bindings: serial: snps-dw-apb-uart: Add JH7100 uarts
pinctrl: starfive: Add pinctrl driver for StarFive SoCs
dt-bindings: pinctrl: Add StarFive JH7100 bindings
dt-bindings: pinctrl: Add StarFive pinctrl definitions
reset: starfive-jh7100: Add StarFive JH7100 reset driver
dt-bindings: reset: Add Starfive JH7100 reset bindings
dt-bindings: reset: Add StarFive JH7100 reset definitions
clk: starfive: Add JH7100 clock generator driver
dt-bindings: clock: starfive: Add JH7100 bindings
dt-bindings: clock: starfive: Add JH7100 clock definitions
dt-bindings: interrupt-controller: Add StarFive JH7100 plic
dt-bindings: timer: Add StarFive JH7100 clint
RISC-V: Add StarFive SoC Kconfig option
Pull ARM SoC devicetree updates from Arnd Bergmann:
"As usual, this is the bulk of the updates for the SoC tree, adding
more devices to existing files, addressing issues from ever improving
automated checking, and fixing minor issues.
The most interesting bits as usual are the new platforms. All the
newly supported SoCs belong into existing families this time:
- Qualcomm gets support for two newly announced platforms, both of
which can now work in production environments: the SDX65 5G modem
that can run a minimal Linux on its Cortex-A7 core, and the
Snapdragon 8 Gen 1, their latest high-end phone SoC.
- Renesas adds support for R-Car S4-8, the most recent automotive
Server/Communication SoC.
- TI adds support for J721s2, a new automotive SoC in the K3 family.
- Mediatek MT7986a/b is a SoC used in Wifi routers, the latest
generation following their popular MT76xx series. Only basic
support is added for now.
- NXP i.MX8 ULP8 is a new low-power variant of the widespread i.MX8
series.
- TI SPEAr320s is a minor variant of the old SPEAr320 SoC that we
have supported for a long time.
New boards with the existing SoCs include
- Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers
- AT91/SAMA5 based evaluation board
- NXP gains twenty new development and industrial boards for their
i.MX and Layerscape SoCs
- Intel IXP4xx now supports the final two machines in device tree
that were previously only supported in old style board files.
- Mediatek MT6589 is used in the Fairphone FP1 phone from 2013, while
MT8183 is used in the Acer Chromebook 314.
- Qualcomm gains support for the reference machines using the two new
SoCs, plus a number of Chromebook variants and phones based on the
Snapdragon 7c, 845 and 888 SoCs, including various Sony Xperia
devices and the Microsoft Surface Duo 2.
- ST STM32 now supports the Engicam i.Core STM32MP1 carrier board.
- Tegra now boots various older Android devices based on 32-bit chips
out of the box, including a number of ASUS Transformer tablets.
There is also a new Jetson AGX Orin developer kit.
- Apple support adds the missing device trees for all the remaining
M1 Macbook and iMac variants, though not yet the M1 Pro/Max
versions.
- Allwinner now supports another version of the Tanix TX6 set-top box
based on the H6 SoC.
- Broadcom gains support for the Netgear RAXE500 Wireless router
based on BCM4908"
* tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (574 commits)
Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U"
arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX
arm64: dts: qcom: sm8450-qrd: Enable USB nodes
arm64: dts: qcom: sm8450: Add usb nodes
ARM: dts: aspeed: add LCLK setting into LPC KCS nodes
dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property
ARM: dts: aspeed: add LCLK setting into LPC IBT node
ARM: dts: aspeed: p10: Add TPM device
ARM: dts: aspeed: p10: Enable USB host ports
ARM: dts: aspeed: Add TYAN S8036 BMC machine
ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config
ARM: dts: aspeed: Adding Facebook Bletchley BMC
ARM: dts: aspeed: g220a: Enable secondary flash
ARM: dts: Add openbmc-flash-layout-64-alt.dtsi
ARM: dts: aspeed: Add secure boot controller node
dt-bindings: aspeed: Add Secure Boot Controller bindings
ARM: dts: Remove "spidev" nodes
dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
dt-bindings: arm: samsung: Document E850-96 board binding
dt-bindings: Add vendor prefix for WinLink
...
Pull ARM SoC driver updates from Arnd Bergmann:
"There are cleanups and minor bugfixes across several SoC specific
drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone,
Renesas, ZynqMP
Noteworthy new features are:
- The op-tee firmware driver gains support for asynchronous
notifications from secure-world firmware.
- Qualcomm platforms gain support for new SoC types in various
drivers: power domain, cache controller, RPM sleep, soc-info
- Samsung SoC drivers gain support for new SoCs in ChipID and PMU, as
well as a new USIv2 driver that handles various types of serial
communiction (uart, i2c, spi)
- Renesas adds support for R-Car S4-8 (R8A779F0) in multiple drivers,
as well as memory controller support for RZ/G2L (R9A07G044).
- Apple M1 gains support for the PMGR power management driver"
* tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
soc: qcom: rpmh-rsc: Fix typo in a comment
soc: qcom: socinfo: Add SM6350 and SM7225
dt-bindings: arm: msm: Don't mark LLCC interrupt as required
dt-bindings: firmware: scm: Add SM6350 compatible
dt-bindings: arm: msm: Add LLCC for SM6350
soc: qcom: rpmhpd: Sort power-domain definitions and lists
soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280
soc: qcom: rpmhpd: Rename rpmhpd struct names
soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao
soc: qcom: socinfo: add SM8450 ID
soc: qcom: rpmhpd: Add SM8450 power domains
dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding
soc: qcom: smem: Update max processor count
dt-bindings: arm: qcom: Document SM8450 SoC and boards
dt-bindings: firmware: scm: Add SM8450 compatible
dt-bindings: arm: cpus: Add kryo780 compatible
soc: qcom: rpmpd: Add support for sm6125
dt-bindings: qcom-rpmpd: Add sm6125 power domains
soc: qcom: aoss: constify static struct thermal_cooling_device_ops
PM: AVS: qcom-cpr: Use div64_ul instead of do_div
...
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
commit 077cdda764 ("net/mlx5e: TC, Fix memory leak with rules with internal port")
commit 31108d142f ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
commit 4390c6edc0 ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
https://lore.kernel.org/all/20211229065352.30178-1-saeed@kernel.org/
net/smc/smc_wr.c
commit 49dc9013e3 ("net/smc: Use the bitmap API when applicable")
commit 349d43127d ("net/smc: fix kernel panic caused by race of smc_sock")
bitmap_zero()/memset() is removed by the fix
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* dpu plane state cleanup in prep for multirect
* dpu debugfs cleanup (and moving things to atomic_print_state) in prep
for multirect
* dp support for sc7280
* struct_mutex removal
* include more GMU state in gpu devcore dumps
* add support for a506
* remove old eDP sub-driver (never was used in any upstream supported
devices and modern things with eDP will use DP sub-driver instead)
* debugfs to disable hw gpu hang detect for (igt tests)
* debugfs for dumping display hw state
* and the usual assortment of cleanup and bug fixes
There still seems to be a timing issue with dpu, showing up on sc7180
devices, after the bridge probe-order change. Ie. things work great if
loglevel is high enough (or enough debug options are enabled, etc).
We'll continue to debug this in the new year.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs+vwr0nkwgYzuYAsCoHtypWpWav+yVvLZGsEJy8tJ56A@mail.gmail.com
Pull thermal control material for 5.17-rc1 from Daniel Lezcano:
- Fix PM issue on the iMX driver when suspend/resume is happening by
implementing PM runtime support (Oleksij Rempel)
- Add 'const' annotation to the thermal_cooling_ops in the Intel
powerclamp driver (Rikard Falkeborn)
- Add TSU driver and bindings for the RZ/G2L platform (Biju Das)
- Fix missing ADC bit set on iMX8MP to enable the sensor (Paul Gerber)
- Fix missing check when calling reset_control_deassert() (Biju Das)
* tag 'thermal-v5.17-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/rz2gl: Add error check for reset_control_deassert()
thermal/drivers/imx8mm: Enable ADC when enabling monitor
thermal/drivers: Add TSU driver for RZ/G2L
dt-bindings: thermal: Document Renesas RZ/G2L TSU
thermal/drivers/intel_powerclamp: Constify static thermal_cooling_device_ops
thermal/drivers/imx: Implement runtime PM support
The QSPI controller on Intel's SoCFPGA platform does not implement the
CQSPI_REG_WR_COMPLETION_CTRL register, thus a write to this register
results in a crash.
Introduce the dts compatible "intel,socfpga-qspi" to differentiate the
hardware.
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v3: revert to "intel,socfpga-qspi"
v2: change binding to "cdns,qspi-nor-0010" to be more generic for other
platforms
Kalle Valo says:
====================
wireless-drivers-next patches for v5.17
Third set of patches for v5.17, and the final one if all goes well. We
have Specific Absorption Rate (SAR) support for both mt76 and rtw88.
Also iwlwifi should be now W=1 warning free. But otherwise nothing
really special this time, business as usual.
Major changes:
mt76
* Specific Absorption Rate (SAR) support
* mt7921: new PCI ids
* mt7921: 160 MHz channel support
iwlwifi
* fix W=1 and sparse warnings
* BNJ hardware support
* add new killer device ids
* support for Time-Aware-SAR (TAS) from the BIOS
* Optimized Connectivity Experience (OCE) scan support
rtw88
* hardware scan
* Specific Absorption Rate (SAR) support
ath11k
* qca6390/wcn6855: report signal and tx bitrate
* qca6390: rfkill support
* qca6390/wcn6855: regdb.bin support
ath5k
* switch to rate table based lookup
wilc1000
* spi: reset/enable GPIO support
* tag 'wireless-drivers-next-2021-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (148 commits)
mt76: mt7921: fix a possible race enabling/disabling runtime-pm
wilc1000: Document enable-gpios and reset-gpios properties
wilc1000: Add reset/enable GPIO support to SPI driver
wilc1000: Convert static "chipid" variable to device-local variable
rtw89: 8852a: correct bit definition of dfs_en
rtw88: don't consider deep PS mode when transmitting packet
ath11k: Fix unexpected return buffer manager error for QCA6390
ath11k: add support of firmware logging for WCN6855
ath11k: Fix napi related hang
ath10k: replace strlcpy with strscpy
rtw88: support SAR via kernel common API
rtw88: 8822c: add ieee80211_ops::hw_scan
iwlwifi: mei: wait before mapping the shared area
iwlwifi: mei: clear the ownership when the driver goes down
iwlwifi: yoyo: fix issue with new DBGI_SRAM region read.
iwlwifi: fw: fix some scan kernel-doc
iwlwifi: pcie: make sure prph_info is set when treating wakeup IRQ
iwlwifi: mvm: remove card state notification code
iwlwifi: mvm: drop too short packets silently
iwlwifi: mvm: fix AUX ROC removal
...
====================
Link: https://lore.kernel.org/r/20211223141108.78808C36AE9@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to validate multiple "if" conditionals, they must be part of an
"allOf:" list, otherwise they will cause a failure in parsing the schema
because of the duplicated "if" property.
Fixes: d7df3948eb ("dt-bindings: display: bridge: lvds-codec: Document pixel data sampling edge select")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211220125147.519880-1-thierry.reding@gmail.com
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.17, please pull the following:
- Rafal adds and documents the Netgear RAXE500 Wireless router based on
the BCM4908 SoC.
* tag 'arm-soc/for-5.17/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm4908: add DT for Netgear RAXE500
dt-bindings: arm: bcm: document Netgear RAXE500 binding
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM-based SocS Device Tree changes
for v5.17, please pull the following:
- Matthew enables the QCA8337 switch of the Merak MX65 to have the
appropriate PLL properties for it to be enabled and set the SGMII
transmit clock to falling edge.
- Arinc removes unnecessary properties of the GPIO keyboard Device Tree
node, adds the external Realtek RTM8365MB switch on the Ausus RT-AC88U,
including fixing the RX delay on the Realtek switch side and enabling
flow control on the Broadcom internal switch port connecting to the
Realtek switch.
- Christian updates the Meraki MR32 Device Tree node to make use of the
hardware I2C controller instead of bitbanging
- Rafal updates the BCM5310X Device Tree files to have the CRU node not
generate warnings, updates the USB 2.0 PHY to use the non-deprecated
binding
- Uwe adds GPIO offset to the gpio names properties for readability
- Stefan updates the BCM2835 VCHIQ Device Tree binding to YAML
- Florian fixes the iProc PCIe Device Tree nodes in Cygnus, Hurricane 2
and Northstar Plus to be compliant with the iProc PCIe YAML binding
(merged in RobH's tree) as well as the SATA controller node unit name.
* tag 'arm-soc/for-5.17/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: correct RX delay and enable flow control on Asus RT-AC88U
ARM: dts: NSP: Rename SATA unit name
ARM: dts: NSP: Fixed iProc PCIe MSI sub-node
ARM: dts: HR2: Fixed iProc PCIe MSI sub-node
ARM: dts: Cygnus: Update PCIe PHY node unit name(s)
ARM: dts: Cygnus: Fixed iProc PCIe controller properties
dt-bindings: soc: bcm: Convert brcm,bcm2835-vchiq to json-schema
ARM: dts: bcm2711-rpi-4-b: Add gpio offsets to line name array
ARM: dts: BCM5301X: use non-deprecated USB 2.0 PHY binding
ARM: dts: BCM5301X: update CRU block description
ARM: BCM53016: MR32: convert to Broadcom iProc I2C Driver
ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U
ARM: dts: BCM5301X: remove unnecessary address & size cells from Asus RT-AC88U
ARM: dts: NSP: MX65: add qca8k falling-edge, PLL properties
Qualcomm ARM64 DeviceTree updates for v5.17
This introduces initial support for the brand new Snapdragon 8 Gen 1,
aka SM8450 platform, with SMP, CPUfreq, cluster idling, low speed buses,
TLMM pinctrl, SMMU, regulators, clocks, power-domains, UFS storage and
USB currently supported.
SDM845 adds new support for Sony Xperia XZ2, XZ2C and XZ3. The Lenovo
Yoga C630 gains a few audio related fixes. The PMIC's VADC channels are
described as thermal zones. OnePlus devices gains msm-id and board-id,
to facilitate a single firmware image for the multiple devices.
On SM8350 the Sony Xperia 1 III and 5 III, as well as initial
description of Microsoft's Surface Duo 2 are introduced. On the
platform side, LLCC, QUP nodes, redistributor stride and all the
low-speed QUPs are added
MSM8996 gained various regulator fixes, and adsp firmware name to
faciliate pushing firmware to linux-firmware. Xiaomi Mi Note 2 gained
touchkey controller definition.
On SDM660 the Xiaomi Redmi Note 7 gained power and volume keys, RPM and
regulator definitions, USB, eMMC and SD-card and a simple-framebuffer
description.
MSM8916 has the mmc aliases corrected, to stop the storage devices to
move around and the RPM sleep stats memory is described. Support for the
Samsung J5 2015 smartphone is introduced.
SM6350 validation errors are fixed and and description of the audio,
compute and modem remoteprocs are added.
A couple new revisions of the SC7180 based Google devices are added.
The SC7280 platform gains venus and a few fixes. The CRD development
device is introduced, with the EC, touchscreen and touchpad.
On SM8250 CPU opp-tables, for scaling L3 cache and DDR frequency based
on CPU frequency, are added. As is TX, RX macros and SoundWire blocks
and used to enable audio on the SM8350 MTP.
* tag 'qcom-arm64-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (92 commits)
arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX
arm64: dts: qcom: sm8450-qrd: Enable USB nodes
arm64: dts: qcom: sm8450: Add usb nodes
arm64: dts: qcom: sm8450: add i2c13 and i2c14 device nodes
arm64: dts: qcom: sm8450: add cpufreq support
arm64: dts: qcom: sm8450: Add rpmhpd node
arm64: dts: qcom: sm8450-qrd: enable ufs nodes
arm64: dts: qcom: sm8450: add ufs nodes
arm64: dts: qcom: sm8450-qrd: Add rpmh regulator nodes
arm64: dts: qcom: Add base SM8450 QRD DTS
arm64: dts: qcom: sm8450: add smmu nodes
arm64: dts: qcom: sm8450: Add reserved memory nodes
arm64: dts: qcom: sm8450: Add tlmm nodes
arm64: dts: qcom: Add base SM8450 DTSI
arm64: dts: qcom: ipq6018: Fix gpio-ranges property
arm64: dts: qcom: sdm845: add QFPROM chipset specific compatible
arm64: dts: qcom: sdm845: mtp: Add vadc channels and thermal zones
arm64: dts: qcom: pm8998: Add ADC Thermal Monitor node
arm64: qcom: dts: drop legacy property #stream-id-cells
Revert "arm64: dts: qcom: sm8350: Specify clock-frequency for arch timer"
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm DeviceTree updates for v5.17
To SDX55 this introduces the description of the IPA, PCIe PHY and PCIe
endpoint controller, as well as enables these for the FN960 device.
The SDX65 5G platform is introduced, currently with definitions
necessary to boot to a shell.
The undocumented property "input-name" is dropped throughout the dts
files, dwc3 nodes throughout gains more specific compatibles and lastly
building of the Dragonboard 410c DTB on ARM32 is enabled, in addition to
its normal operation in 64-bit mode.
* tag 'qcom-dts-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: Drop input-name property
ARM: dts: qcom: sdx65: Add pincontrol node
ARM: dts: qcom: Add SDX65 platform and MTP board support
dt-bindings: arm: qcom: Document SDX65 platform and boards
dt-bindings: clock: Add SDX65 GCC clock bindings
ARM: dts: qcom: Build apq8016-sbc/DragonBoard 410c DTB on ARM32
ARM: dts: qcom: sdx55-t55: Enable IPA
ARM: dts: qcom: sdx55-fn980: Enable IPA
ARM: dts: qcom: sdx55-fn980: Enable PCIe EP
ARM: dts: qcom: sdx55: Add support for PCIe EP
ARM: dts: qcom: sdx55-fn980: Enable PCIE0 PHY
ARM: dts: qcom: sdx55: Add support for PCIe PHY
ARM: dts: qcom: update USB nodes with new platform specific compatible
Link: https://lore.kernel.org/r/20211221042154.3621955-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm driver updates for v5.17
This introduces RPM power-domain support for the SM8450, SM6125 and
QCM2290 platforms. It them clean up the platform-based naming of the
resources definitions throughout the RPMh PD driver.
The last-level cache controller driver gains SM8350 support.
The RPM sleep stats driver gains support for several older systems that
had a slightly different memory layout for this information.
The socinfo gains SM8450, SM6350 and SM7227 definitions.
In addition to the DeviceTree binding updates related to these changes
new compatibles was added to describe the SM8450 and the Kryo 780 CPU.
Lastly a few typo and style fixes are introduced.
* tag 'qcom-drivers-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (27 commits)
soc: qcom: rpmh-rsc: Fix typo in a comment
soc: qcom: socinfo: Add SM6350 and SM7225
dt-bindings: arm: msm: Don't mark LLCC interrupt as required
dt-bindings: firmware: scm: Add SM6350 compatible
dt-bindings: arm: msm: Add LLCC for SM6350
soc: qcom: rpmhpd: Sort power-domain definitions and lists
soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280
soc: qcom: rpmhpd: Rename rpmhpd struct names
soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao
soc: qcom: socinfo: add SM8450 ID
soc: qcom: rpmhpd: Add SM8450 power domains
dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding
soc: qcom: smem: Update max processor count
dt-bindings: arm: qcom: Document SM8450 SoC and boards
dt-bindings: firmware: scm: Add SM8450 compatible
dt-bindings: arm: cpus: Add kryo780 compatible
soc: qcom: rpmpd: Add support for sm6125
dt-bindings: qcom-rpmpd: Add sm6125 power domains
soc: qcom: aoss: constify static struct thermal_cooling_device_ops
PM: AVS: qcom-cpr: Use div64_ul instead of do_div
...
Link: https://lore.kernel.org/r/20211221040452.3620633-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
If LPC BT driver is registered ahead of lpc-ctrl module, LPC BT
hardware block will be enabled without heart beating of LCLK until
lpc-ctrl enables the LCLK. This issue causes improper handling on
host interrupts when the host sends interrupts in that time frame.
Then kernel eventually forcibly disables the interrupt with
dumping stack and printing a 'nobody cared this irq' message out.
To prevent this issue, all LPC sub drivers should enable LCLK
individually so this patch adds 'clocks' property as one of
required properties to enable the LCLK by the LPC IBT driver.
Note: dtsi change in this patch series should be applied along with,
and dtbs should be re-compiled after applying this series since
it's adding a new required property otherwise the driver will not
be probed correctly.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211108190200.290957-3-jae.hyun.yoo@intel.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Pull regulator fix from Mark Brown:
"Binding fix for v5.16
This fixes problems validating DT bindings using op_mode which wasn't
described as it should have been when converting to DT schema"
* tag 'regulator-fix-v5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: dt-bindings: samsung,s5m8767: add missing op_mode to bucks
Samsung DTS ARM64 changes for v5.17
1. Add bindings for: Exynos USI, Samsung Galaxy A8 (2018) board, WinLink
E850-96 board and WinLink vendor prefix.
2. Add pinctrl definitions used for Exynos850.
3. Minor fixes and improvements.
4. Convert serial on ExynosAutov9 to new hierarchy where serial is part
of USI node.
* tag 'samsung-dt64-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
dt-bindings: arm: samsung: Document E850-96 board binding
dt-bindings: Add vendor prefix for WinLink
dt-bindings: arm: samsung: document jackpotlte board binding
dt-bindings: soc: samsung: Fix I2C clocks order in USI binding example
arm64: dts: exynos: convert serial_0 to USI on ExynosAutov9
dt-bindings: soc: samsung: Add Exynos USI bindings
arm64: dts: exynos: Rename hsi2c nodes to i2c for Exynos5433 and Exynos7
Link: https://lore.kernel.org/r/20211220115530.30961-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Devicetree changes for TI K3 platforms for v5.17 merge window:
* New Platforms:
- J721s2 SoC, SoM and Common Processor Board support
* New features:
- CAN support on AM64 EVM and SK
- TimeSync Router on AM64
* Fixes:
- Correct d-cache-sets info on J7200
- Fix L2 cache-sets value for J721e/J7200/AM64
- Fixes for dtbs_check warnings wrt serdes_ln_ctrl node on J721e/J7200
- Disable McASP on IoT2050 board to fix dtbs_check warnings
* tag 'ti-k3-dt-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arch: arm64: ti: Add support J721S2 Common Processor Board
arm64: dts: ti: Add initial support for J721S2 System on Module
arm64: dts: ti: Add initial support for J721S2 SoC
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2
dt-bindings: arm: ti: Add bindings for J721s2 SoC
arm64: dts: ti: iot2050: Disable mcasp nodes at dtsi level
arm64: dts: ti: k3-am642-evm/sk: Add support for main domain mcan nodes in EVM and disable them on SK
arm64: dts: ti: k3-am64-main: Add support for MCAN
arm64: dts: ti: k3-j721e-common-proc-board: Add support for mcu and main mcan nodes
arm64: dts: ti: k3-j721e: Add support for MCAN nodes
arm64: dts: ti: am654-base-board/am65-iot2050-common: Disable mcan nodes
arm64: dts: ti: k3-am65-mcu: Add Support for MCAN
arm64: dts: ti: k3-am64-main: add timesync router node
arm64: dts: ti: k3-j7200: Correct the d-cache-sets info
arm64: dts: ti: k3-j721e: Fix the L2 cache sets
arm64: dts: ti: k3-j7200: Fix the L2 cache sets
arm64: dts: ti: k3-am642: Fix the L2 cache sets
arm64: dts: ti: j721e-main: Fix 'dtbs_check' in serdes_ln_ctrl node
arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node
arm64: dts: ti: k3-j721e: correct cache-sets info
Link: https://lore.kernel.org/r/20211217172806.10023-2-vigneshr@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung SoC drivers changes for v5.17
1. Exynos ChipID: add Exynos7885 support.
2. Exynos PMU: add Exynos850 support.
3. Minor bindings cleanup.
4. Add Exynos USIv2 (Universal Serial Interface) driver. The USI block is
a shared IP block between I2C, UART/serial and SPI. Basically one has
to choose which feature the USI block will support and later the
regular I2C/serial/SPI driver will bind and work.
This merges also one commit with dt-binding headers from my dts64
pull request.
Together with a future serial driver change, this will break the ABI.
Affected: Serial on ExynosAutov9 SADK and out-of-tree ExynosAutov9 boards
Why: To properly and efficiently support the USI with new hierarchy
of USI-{serial,SPI,I2C} devicetree nodes.
Rationale:
Recently added serial and USI support was short-sighted and did not
allow to smooth support of other features (SPI and I2C). Adding
support for USI-SPI and USI-I2C would effect in code duplication.
Adding support for different USI versions (currently supported is
USIv2 but support for v1 is planned) would cause even more code
duplication and create a solution difficult to maintain.
Since USI-serial and ExynosAutov9 have been added recently, are
considered fresh development features and there are no supported
products using them, the code/solution is being refactored in
non-backwards compatible way. The compatibility is not broken yet.
It will be when serial driver changes are accepted.
The ABI break was discussed with only known users of ExynosAutov9 and
received their permission.
* tag 'samsung-drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: keep SoC driver bindings together
soc: samsung: Add USI driver
dt-bindings: soc: samsung: Add Exynos USI bindings
soc: samsung: exynos-pmu: Add Exynos850 support
dt-bindings: samsung: pmu: Document Exynos850
soc: samsung: exynos-chipid: add Exynos7885 SoC support
soc: samsung: exynos-chipid: describe which SoCs go with compatibles
Link: https://lore.kernel.org/r/20211220115405.30434-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Extend dt-bindings for lan966x with analyzer interrupt.
This interrupt can be generated for example when the HW learn/forgets
an entry in the MAC table.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kalle Valo says:
====================
wireless-drivers-next patches for v5.17
Second set of patches for v5.17, planning to do at least one more.
Smaller new features, nothing special this time.
Major changes:
rtw88
* debugfs file to fix tx rate
iwlwifi
* support SAR GEO Offset Mapping (SGOM) via BIOS
* support firmware API version 68
* add some new device IDs
ath11k
* support PCI devices with 1 MSI vector
* WCN6855 hw2.1 support
* 11d scan offload support
* full monitor mode, only supported on QCN9074
* scan MAC address randomization support
* reserved host DDR addresses from DT for PCI devices support
ath9k
* switch to rate table based lookup
ath
* extend South Korea regulatory domain support
wcn36xx
* beacon filter support
* tag 'wireless-drivers-next-2021-12-17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (129 commits)
wcn36xx: Implement beacon filtering
wcn36xx: Fix physical location of beacon filter comment
wcn36xx: Fix beacon filter structure definitions
ath11k: Use reserved host DDR addresses from DT for PCI devices
dt: bindings: add new DT entry for ath11k PCI device support
wilc1000: Improve WILC TX performance when power_save is off
wl1251: specify max. IE length
rsi: fix array out of bound
wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq"
wilc1000: Rename tx task from "K_TXQ_TASK" to NETDEV-tx
wilc1000: Rename irq handler from "WILC_IRQ" to netdev name
wilc1000: Rename SPI driver from "WILC_SPI" to "wilc1000_spi"
wilc1000: Fix spurious "FW not responding" error
wilc1000: Remove misleading USE_SPI_DMA macro
wilc1000: Fix missing newline in error message
wilc1000: Fix copy-and-paste typo in wilc_set_mac_address
rtw89: coex: Update COEX to 5.5.8
rtw89: coex: Cancel PS leaving while C2H comes
rtw89: coex: Update BT counters while receiving report
rtw89: coex: Define LPS state for BTC using
...
====================
Link: https://lore.kernel.org/r/20211217130952.34887C36AE9@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Renesas DT binding updates for v5.17 (take two)
- Document support for the R-Car S4-8 Spider CPU and BreakOut boards.
* tag 'renesas-dt-bindings-for-v5.17-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: arm: renesas: Document Renesas Spider boards
Link: https://lore.kernel.org/r/cover.1639736725.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
