Add a file that provides a Unique ID for the GPU.
This will persist across machines and is guaranteed to be unique.
This is only available for GFX9 and newer, so older ASICs will not
have this file in the sysfs pool
v2: Store it in adev for ASICs that don't have a hwmgr
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose temp[1-3]_label hwmon interfaces. While temp2_label
and temp3_label are visible for SOC15 dGPUs only.
- V2: correct temp1_label as "edge"
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Two new hwmon interfaces(temp2_input and temp3_input) are added.
They are supported on SOC15 dGPUs only.
- V2: correct thermal sensor output
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These new interfaces(temp2_crit, temp2_crit_hyst, temp3_crit,
temp3_crit_hyst) are supported on SOC15 dGPUs only.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu.ppt_funcs is only initialized for ASICs supporting SW SMU.
On a Hawaii ASIC, attempting to access the udev attribute
ATTRS{power_dpm_state} will cause a null pointer deref in
amdgpu_get_dpm_state() because of this.
Fix by checking if SW SMU is supported first.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Under vega10 virtualuzation, smu ip block will not be added.
Therefore, we need add pp clk query and force dpm level function
at amdgpu_virt_ops to support the feature.
v2: add get_pp_clk existence check and use kzalloc to allocate buf
v3: return -ENOMEM for allocation failure and correct the coding style
Signed-off-by: Yintian Tao <yttao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add sys interface to set socclk, fclk and dcefclk for smu.
Add feature_mask parameter for smu_upload_dpm_level as socclk, fclk and
dcefclk have dependency, without feature_mask to point out specific clk
will make it fail to set some clk.
Fix the function of smu_unforce_dpm_levels.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Gui Chengming <Jack.Gui@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1, set get_pwm1_enable and set_pwm1_enable functions to call
smu_get_fan_control_mode and smu_set_fan_control_mode for SMU11
2, implement set_fan_control_mode function
v2: add return value in set_fan_control_mode function
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unify power stade adjust function into smu_handle_task by the judgment
of task_id.
Move functions which have no relationship with smu version into the file
of amdgpu_smu.
Modified the function of smu_display_config_changed into two part.
Unify some similiar function.
v2: Correct the operation of upload dpm level when force dpm limit value.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add pp_table sysfs interface for new sw-smu.
get: return pptable raw data
set: write pptable raw data to pptable, then reset smu (hw_fini -> hw_init)
v2: fix mutex lock issue
Signed-off-by: Kevin Wang <Kevin1.Wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add missing power_average to visible check for power
attributes for APUs. Was missed before.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
User can use "pp_dpm_dcefclk" to retrieve and adjust dcefclock power
levels.
V2: expose this interface for Vega10 and later ASICs only
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
User can use "pp_dpm_fclk" to retrieve and adjust fclock power
levels.
V2: expose this interface for Vega20 and later ASICs only
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
User can use "pp_dpm_socclk" to retrieve and adjust SOC clock power
levels.
V2: expose this interface for Vega10 and later ASICs only
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
User can use "ppfeatures" sysfs interface to retrieve and set enabled
powerplay features.
V2: expose this feature for Vega10 and later dGPUs
V3: squash in removal of unused variable (Alex)
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose sclk (gfx clock) and mclk (memory clock) via
hwmon compatible interface. hwmon does not actually
formally specify a frequency type attribute, but these
are compatible with the format of the other attributes
exposed via hwmon. Units are hertz.
freq1_input - GPU gfx/compute clock in hertz
freq2_input - GPU memory clock in hertz (dGPU only)
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a sysfs file that reports the number of bytes transmitted and
received in the last second. This can be used to approximate the PCIe
bandwidth usage over the last second.
v2: Clarify use of mps as estimation of bandwidth
v3: Don't make the file on APUs
v4: Early exit for APUs in the read function, change output to
display "packets-received packets-sent mps"
v5: fix missing header for si (Alex)
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
