Commit Graph

174 Commits

Author SHA1 Message Date
Alex Williamson
4bc94d5dc9 vfio: Fix lockdep issue
When we open a device file descriptor, we currently have the
following:

vfio_group_get_device_fd()
  mutex_lock(&group->device_lock);
    open()
    ...
    if (ret)
      release()

If we hit that error case, we call the backend driver release path,
which for vfio-pci looks like this:

vfio_pci_release()
  vfio_pci_disable()
    vfio_pci_try_bus_reset()
      vfio_pci_get_devs()
        vfio_device_get_from_dev()
          vfio_group_get_device()
            mutex_lock(&group->device_lock);

Whoops, we've stumbled back onto group.device_lock and created a
deadlock.  There's a low likelihood of ever seeing this play out, but
obviously it needs to be fixed.  To do that we can use a reference to
the vfio_device for vfio_group_get_device_fd() rather than holding the
lock.  There was a loop in this function, theoretically allowing
multiple devices with the same name, but in practice we don't expect
such a thing to happen and the code is already aborting from the loop
with break on any sort of error rather than continuing and only
parsing the first match anyway, so the loop was effectively unused
already.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Fixes: 20f300175a ("vfio/pci: Fix racy vfio_device_get_from_dev() call")
Reported-by: Joerg Roedel <joro@8bytes.org>
Tested-by: Joerg Roedel <jroedel@suse.de>
2015-07-24 15:14:04 -06:00
Linus Torvalds
b779157dd3 VFIO updates for v4.2
- Fix race with device reference versus driver release (Alex Williamson)
 - Add reset hooks and Calxeda xgmac reset for vfio-platform (Eric Auger)
 - Enable vfio-platform for ARM64 (Eric Auger)
 - Tag Baptiste Reynal as vfio-platform sub-maintainer (Alex Williamson)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVjaiUAAoJECObm247sIsiRJQP/RiqcYg9uDGbBt8Gi+Qi2BmG
 KrVqG/ty18CZgyis01GZa5O8bL2ViQFAwfpnIJ6l5v4IQAYUUPlfy6Gy9ZgotQir
 U5ot4ABT9KGqJyjkDixvfUmg5M1gj1euO/xC+KVMpnxN0tC1wbymtAahzd3/RXyq
 5cef/cran5bwnh2RtAN/rFkbjZBuqppVZJJV7uyOd69HXhktrZw5skQssL/61+vT
 znww9H6WT/Qk60haQrcD+SVqAaPv6Tx8bu1LVZ1Zc/rWVxJ2HisOp5dTxGeRnaSu
 PtMfOndgtYwe5fBaYyNjWluJLpBzY7b5UvHtsZ52hPXvlgkKSMrfCJxM4BQQSekW
 txmeV6LpQsm+Nq0+sIOFph8h/LzZaebvMsc5YnLamixGb/mAxbbr31yGjokTuS4F
 ndKUR+9/mFrdcqeBT4UD1Yt45YHl7bRZ9AWKJIC1TstrTW+1rEZ49r71PLea6y4f
 SJJ+eCvhYr/eebvrsfePqzeo1X+S8HNTgCXrSlqZdohS21qtnsh4g/CaOxI2UVt8
 zaZosxNQLzpNK/Z8s7MZpCMenWZsq2frcckROeEgNKdPntwkbVT4MG3LBrWvtuBU
 HGAKfWCGAjfIIN8ZBUSFtIqua/kXCcec99CcYYQOtv16UbmhadAPoUlMur3HI9T9
 S0vWtIKTsRa8ymyrGBDp
 =/gWA
 -----END PGP SIGNATURE-----

Merge tag 'vfio-v4.2-rc1' of git://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:

 - fix race with device reference versus driver release (Alex Williamson)

 - add reset hooks and Calxeda xgmac reset for vfio-platform (Eric Auger)

 - enable vfio-platform for ARM64 (Eric Auger)

 - tag Baptiste Reynal as vfio-platform sub-maintainer (Alex Williamson)

* tag 'vfio-v4.2-rc1' of git://github.com/awilliam/linux-vfio:
  MAINTAINERS: Add vfio-platform sub-maintainer
  VFIO: platform: enable ARM64 build
  VFIO: platform: Calxeda xgmac reset module
  VFIO: platform: populate the reset function on probe
  VFIO: platform: add reset callback
  VFIO: platform: add reset struct and lookup table
  vfio/pci: Fix racy vfio_device_get_from_dev() call
2015-06-28 12:32:13 -07:00
Linus Torvalds
08d183e3c1 powerpc updates for 4.2
- Disable the 32-bit vdso when building LE, so we can build with a 64-bit only
    toolchain.
  - EEH fixes from Gavin & Richard.
  - Enable the sys_kcmp syscall from Laurent.
  - Sysfs control for fastsleep workaround from Shreyas.
  - Expose OPAL events as an irq chip by Alistair.
  - MSI ops moved to pci_controller_ops by Daniel.
  - Fix for kernel to userspace backtraces for perf from Anton.
  - Merge pseries and pseries_le defconfigs from Cyril.
  - CXL in-kernel API from Mikey.
  - OPAL prd driver from Jeremy.
  - Fix for DSCR handling & tests from Anshuman.
  - Powernv flash mtd driver from Cyril.
  - Dynamic DMA Window support on powernv from Alexey.
  - LLVM clang fixes & workarounds from Anton.
  - Reworked version of the patch to abort syscalls when transactional.
  - Fix the swap encoding to support 4TB, from Aneesh.
  - Various fixes as usual.
  - Freescale updates from Scott: Highlights include more 8xx optimizations, an
    e6500 hugetlb optimization, QMan device tree nodes, t1024/t1023 support, and
    various fixes and cleanup.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJViSZqAAoJEFHr6jzI4aWAA7kQAKq3+pejfo2rY7alpKJyeVao
 vlaIEaDNOTh+ctcmu3MFF9Jy6fai8gNZziRXU5JRmE5RW4GVBN4KZiqXRbkVjdBK
 uG9sCX7Y58VRsS2vnGBYLsamfTMgjaXeDvgunQHVLiechJnrDr0RHEK90F3LSi73
 Axp6l8XIG63a3zFZmkhzANMCme2lm5+MWmGlSjUUNi5F+viQUgJc5iiO8xrVUgM5
 RpNlV2NJSqFiU+gMQWJ226V85UIniouq4j+qtyUcu8/m9BberyolXVU0GPlPFdsx
 r/Qh9uCJyZaUdSB5hzomQZj50IsSz6J6nEuJTeGRoVZOmeI8Dnc2xU9fxQF5fC8H
 lUJw10WPoNOggQZTeSUKn7wTXw3i4p3KsWNUczaW68VJdhqZUVaSp0+I6mnDSqzs
 9iGC+VffLYNa1OHq7mGRFrgDdLBCHes31aZ3CxlQsmyNpAPCwMzsD4TUfVnvOG6E
 oJOeaQ4mZM9PvqxEYJfoIL+vgRxmQ8sdIBtNY4in+C7J6eFnZNFO9xmPnJZuVU31
 PGtx60kjFCOVMXvqn34WkRNbgqGWI91IK0KcRwFO2LXVio1uY77TWL52kNK2IMsp
 Az+VDDvqnT3+BoV1yz0P6SrXAkwTpvFk2y+IdmEiUUN7zZFL5ZSA2epej9AzHTAK
 WID2bc5yVtIL6p6x5ICH
 =d9Wh
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

Pull powerpc updates from Michael Ellerman:

 - disable the 32-bit vdso when building LE, so we can build with a
   64-bit only toolchain.

 - EEH fixes from Gavin & Richard.

 - enable the sys_kcmp syscall from Laurent.

 - sysfs control for fastsleep workaround from Shreyas.

 - expose OPAL events as an irq chip by Alistair.

 - MSI ops moved to pci_controller_ops by Daniel.

 - fix for kernel to userspace backtraces for perf from Anton.

 - merge pseries and pseries_le defconfigs from Cyril.

 - CXL in-kernel API from Mikey.

 - OPAL prd driver from Jeremy.

 - fix for DSCR handling & tests from Anshuman.

 - Powernv flash mtd driver from Cyril.

 - dynamic DMA Window support on powernv from Alexey.

 - LLVM clang fixes & workarounds from Anton.

 - reworked version of the patch to abort syscalls when transactional.

 - fix the swap encoding to support 4TB, from Aneesh.

 - various fixes as usual.

 - Freescale updates from Scott: Highlights include more 8xx
   optimizations, an e6500 hugetlb optimization, QMan device tree nodes,
   t1024/t1023 support, and various fixes and cleanup.

* tag 'powerpc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (180 commits)
  cxl: Fix typo in debug print
  cxl: Add CXL_KERNEL_API config option
  powerpc/powernv: Fix wrong IOMMU table in pnv_ioda_setup_bus_dma()
  powerpc/mm: Change the swap encoding in pte.
  powerpc/mm: PTE_RPN_MAX is not used, remove the same
  powerpc/tm: Abort syscalls in active transactions
  powerpc/iommu/ioda2: Enable compile with IOV=on and IOMMU_API=off
  powerpc/include: Add opal-prd to installed uapi headers
  powerpc/powernv: fix construction of opal PRD messages
  powerpc/powernv: Increase opal-irqchip initcall priority
  powerpc: Make doorbell check preemption safe
  powerpc/powernv: pnv_init_idle_states() should only run on powernv
  macintosh/nvram: Remove as unused
  powerpc: Don't use gcc specific options on clang
  powerpc: Don't use -mno-strict-align on clang
  powerpc: Only use -mtraceback=no, -mno-string and -msoft-float if toolchain supports it
  powerpc: Only use -mabi=altivec if toolchain supports it
  powerpc: Fix duplicate const clang warning in user access code
  vfio: powerpc/spapr: Support Dynamic DMA windows
  vfio: powerpc/spapr: Register memory and define IOMMU v2
  ...
2015-06-24 08:46:32 -07:00
Eric Auger
e6bcd47f8f VFIO: platform: enable ARM64 build
This patch enables building VFIO platform and derivatives on ARM64.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-22 09:35:47 -06:00
Eric Auger
713cc334a6 VFIO: platform: Calxeda xgmac reset module
This patch introduces a module that registers and implements a basic
reset function for the Calxeda xgmac device. This latter basically disables
interrupts and stops DMA transfers.

The reset function code is inherited from the native calxeda xgmac driver.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-22 09:35:38 -06:00
Eric Auger
3eeb0d510c VFIO: platform: populate the reset function on probe
The reset function lookup happens on vfio-platform probe. The reset
module load is requested  and a reference to the function symbol is
hold. The reference is released on vfio-platform remove.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-22 09:35:30 -06:00
Eric Auger
813ae66008 VFIO: platform: add reset callback
A new reset callback is introduced. If this callback is populated,
the reset is invoked on device first open/last close or upon userspace
ioctl.  The modality is exposed on VFIO_DEVICE_GET_INFO.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-22 09:35:22 -06:00
Eric Auger
9f85d8f9fa VFIO: platform: add reset struct and lookup table
This patch introduces the vfio_platform_reset_combo struct that
stores all the information useful to handle the reset modality:
compat string, name of the reset function, name of the module that
implements the reset function. A lookup table of such structures
is added, currently void.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-17 15:39:09 -06:00
Alexey Kardashevskiy
e633bc86a9 vfio: powerpc/spapr: Support Dynamic DMA windows
This adds create/remove window ioctls to create and remove DMA windows.
sPAPR defines a Dynamic DMA windows capability which allows
para-virtualized guests to create additional DMA windows on a PCI bus.
The existing linux kernels use this new window to map the entire guest
memory and switch to the direct DMA operations saving time on map/unmap
requests which would normally happen in a big amounts.

This adds 2 ioctl handlers - VFIO_IOMMU_SPAPR_TCE_CREATE and
VFIO_IOMMU_SPAPR_TCE_REMOVE - to create and remove windows.
Up to 2 windows are supported now by the hardware and by this driver.

This changes VFIO_IOMMU_SPAPR_TCE_GET_INFO handler to return additional
information such as a number of supported windows and maximum number
levels of TCE tables.

DDW is added as a capability, not as a SPAPR TCE IOMMU v2 unique feature
as we still want to support v2 on platforms which cannot do DDW for
the sake of TCE acceleration in KVM (coming soon).

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11 15:16:55 +10:00
Alexey Kardashevskiy
2157e7b82f vfio: powerpc/spapr: Register memory and define IOMMU v2
The existing implementation accounts the whole DMA window in
the locked_vm counter. This is going to be worse with multiple
containers and huge DMA windows. Also, real-time accounting would requite
additional tracking of accounted pages due to the page size difference -
IOMMU uses 4K pages and system uses 4K or 64K pages.

Another issue is that actual pages pinning/unpinning happens on every
DMA map/unmap request. This does not affect the performance much now as
we spend way too much time now on switching context between
guest/userspace/host but this will start to matter when we add in-kernel
DMA map/unmap acceleration.

This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU.
New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces
2 new ioctls to register/unregister DMA memory -
VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY -
which receive user space address and size of a memory region which
needs to be pinned/unpinned and counted in locked_vm.
New IOMMU splits physical pages pinning and TCE table update
into 2 different operations. It requires:
1) guest pages to be registered first
2) consequent map/unmap requests to work only with pre-registered memory.
For the default single window case this means that the entire guest
(instead of 2GB) needs to be pinned before using VFIO.
When a huge DMA window is added, no additional pinning will be
required, otherwise it would be guest RAM + 2GB.

The new memory registration ioctls are not supported by
VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration
will require memory to be preregistered in order to work.

The accounting is done per the user process.

This advertises v2 SPAPR TCE IOMMU and restricts what the userspace
can do with v1 or v2 IOMMUs.

In order to support memory pre-registration, we need a way to track
the use of every registered memory region and only allow unregistration
if a region is not in use anymore. So we need a way to tell from what
region the just cleared TCE was from.

This adds a userspace view of the TCE table into iommu_table struct.
It contains userspace address, one per TCE entry. The table is only
allocated when the ownership over an IOMMU group is taken which means
it is only used from outside of the powernv code (such as VFIO).

As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support
DDW API), this creates a default DMA window for IODA2 for consistency.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11 15:16:55 +10:00
Alexey Kardashevskiy
46d3e1e162 vfio: powerpc/spapr: powerpc/powernv/ioda2: Use DMA windows API in ownership control
Before the IOMMU user (VFIO) would take control over the IOMMU table
belonging to a specific IOMMU group. This approach did not allow sharing
tables between IOMMU groups attached to the same container.

This introduces a new IOMMU ownership flavour when the user can not
just control the existing IOMMU table but remove/create tables on demand.
If an IOMMU implements take/release_ownership() callbacks, this lets
the user have full control over the IOMMU group. When the ownership
is taken, the platform code removes all the windows so the caller must
create them.
Before returning the ownership back to the platform code, VFIO
unprograms and removes all the tables it created.

This changes IODA2's onwership handler to remove the existing table
rather than manipulating with the existing one. From now on,
iommu_take_ownership() and iommu_release_ownership() are only called
from the vfio_iommu_spapr_tce driver.

Old-style ownership is still supported allowing VFIO to run on older
P5IOC2 and IODA IO controllers.

No change in userspace-visible behaviour is expected. Since it recreates
TCE tables on each ownership change, related kernel traces will appear
more often.

This adds a pnv_pci_ioda2_setup_default_config() which is called
when PE is being configured at boot time and when the ownership is
passed from VFIO to the platform code.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11 15:16:54 +10:00
Alexey Kardashevskiy
4793d65d1a vfio: powerpc/spapr: powerpc/powernv/ioda: Define and implement DMA windows API
This extends iommu_table_group_ops by a set of callbacks to support
dynamic DMA windows management.

create_table() creates a TCE table with specific parameters.
it receives iommu_table_group to know nodeid in order to allocate
TCE table memory closer to the PHB. The exact format of allocated
multi-level table might be also specific to the PHB model (not
the case now though).
This callback calculated the DMA window offset on a PCI bus from @num
and stores it in a just created table.

set_window() sets the window at specified TVT index + @num on PHB.

unset_window() unsets the window from specified TVT.

This adds a free() callback to iommu_table_ops to free the memory
(potentially a tree of tables) allocated for the TCE table.

create_table() and free() are supposed to be called once per
VFIO container and set_window()/unset_window() are supposed to be
called for every group in a container.

This adds IOMMU capabilities to iommu_table_group such as default
32bit window parameters and others. This makes use of new values in
vfio_iommu_spapr_tce. IODA1/P5IOC2 do not support DDW so they do not
advertise pagemasks to the userspace.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11 15:16:52 +10:00
Alexey Kardashevskiy
05c6cfb9dc powerpc/iommu/powernv: Release replaced TCE
At the moment writing new TCE value to the IOMMU table fails with EBUSY
if there is a valid entry already. However PAPR specification allows
the guest to write new TCE value without clearing it first.

Another problem this patch is addressing is the use of pool locks for
external IOMMU users such as VFIO. The pool locks are to protect
DMA page allocator rather than entries and since the host kernel does
not control what pages are in use, there is no point in pool locks and
exchange()+put_page(oldtce) is sufficient to avoid possible races.

This adds an exchange() callback to iommu_table_ops which does the same
thing as set() plus it returns replaced TCE and DMA direction so
the caller can release the pages afterwards. The exchange() receives
a physical address unlike set() which receives linear mapping address;
and returns a physical address as the clear() does.

This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement
for a platform to have exchange() implemented in order to support VFIO.

This replaces iommu_tce_build() and iommu_clear_tce() with
a single iommu_tce_xchg().

This makes sure that TCE permission bits are not set in TCE passed to
IOMMU API as those are to be calculated by platform code from
DMA direction.

This moves SetPageDirty() to the IOMMU code to make it work for both
VFIO ioctl interface in in-kernel TCE acceleration (when it becomes
available later).

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11 15:16:49 +10:00
Alexey Kardashevskiy
f87a88642e vfio: powerpc/spapr/iommu/powernv/ioda2: Rework IOMMU ownership control
This adds tce_iommu_take_ownership() and tce_iommu_release_ownership
which call in a loop iommu_take_ownership()/iommu_release_ownership()
for every table on the group. As there is just one now, no change in
behaviour is expected.

At the moment the iommu_table struct has a set_bypass() which enables/
disables DMA bypass on IODA2 PHB. This is exposed to POWERPC IOMMU code
which calls this callback when external IOMMU users such as VFIO are
about to get over a PHB.

The set_bypass() callback is not really an iommu_table function but
IOMMU/PE function. This introduces a iommu_table_group_ops struct and
adds take_ownership()/release_ownership() callbacks to it which are
called when an external user takes/releases control over the IOMMU.

This replaces set_bypass() with ownership callbacks as it is not
necessarily just bypass enabling, it can be something else/more
so let's give it more generic name.

The callbacks is implemented for IODA2 only. Other platforms (P5IOC2,
IODA1) will use the old iommu_take_ownership/iommu_release_ownership API.
The following patches will replace iommu_take_ownership/
iommu_release_ownership calls in IODA2 with full IOMMU table release/
create.

As we here and touching bypass control, this removes
pnv_pci_ioda2_setup_bypass_pe() as it does not do much
more compared to pnv_pci_ioda2_set_bypass. This moves tce_bypass_base
initialization to pnv_pci_ioda2_setup_dma_pe.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11 15:16:47 +10:00
Alexey Kardashevskiy
0eaf4defc7 powerpc/spapr: vfio: Switch from iommu_table to new iommu_table_group
So far one TCE table could only be used by one IOMMU group. However
IODA2 hardware allows programming the same TCE table address to
multiple PE allowing sharing tables.

This replaces a single pointer to a group in a iommu_table struct
with a linked list of groups which provides the way of invalidating
TCE cache for every PE when an actual TCE table is updated. This adds
pnv_pci_link_table_and_group() and pnv_pci_unlink_table_and_group()
helpers to manage the list. However without VFIO, it is still going
to be a single IOMMU group per iommu_table.

This changes iommu_add_device() to add a device to a first group
from the group list of a table as it is only called from the platform
init code or PCI bus notifier and at these moments there is only
one group per table.

This does not change TCE invalidation code to loop through all
attached groups in order to simplify this patch and because
it is not really needed in most cases. IODA2 is fixed in a later
patch.

This should cause no behavioural change.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11 15:16:15 +10:00
Alexey Kardashevskiy
b348aa6529 powerpc/spapr: vfio: Replace iommu_table with iommu_table_group
Modern IBM POWERPC systems support multiple (currently two) TCE tables
per IOMMU group (a.k.a. PE). This adds a iommu_table_group container
for TCE tables. Right now just one table is supported.

This defines iommu_table_group struct which stores pointers to
iommu_group and iommu_table(s). This replaces iommu_table with
iommu_table_group where iommu_table was used to identify a group:
- iommu_register_group();
- iommudata of generic iommu_group;

This removes @data from iommu_table as it_table_group provides
same access to pnv_ioda_pe.

For IODA, instead of embedding iommu_table, the new iommu_table_group
keeps pointers to those. The iommu_table structs are allocated
dynamically.

For P5IOC2, both iommu_table_group and iommu_table are embedded into
PE struct. As there is no EEH and SRIOV support for P5IOC2,
iommu_free_table() should not be called on iommu_table struct pointers
so we can keep it embedded in pnv_phb::p5ioc2.

For pSeries, this replaces multiple calls of kzalloc_node() with a new
iommu_pseries_alloc_group() helper and stores the table group struct
pointer into the pci_dn struct. For release, a iommu_table_free_group()
helper is added.

This moves iommu_table struct allocation from SR-IOV code to
the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and
pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized.
This change is here because those lines had to be changed anyway.

This should cause no behavioural change.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11 15:14:57 +10:00
Alexey Kardashevskiy
22af48596e vfio: powerpc/spapr: Rework groups attaching
This is to make extended ownership and multiple groups support patches
simpler for review.

This should cause no behavioural change.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11 15:14:56 +10:00
Alexey Kardashevskiy
649354b75d vfio: powerpc/spapr: Moving pinning/unpinning to helpers
This is a pretty mechanical patch to make next patches simpler.

New tce_iommu_unuse_page() helper does put_page() now but it might skip
that after the memory registering patch applied.

As we are here, this removes unnecessary checks for a value returned
by pfn_to_page() as it cannot possibly return NULL.

This moves tce_iommu_disable() later to let tce_iommu_clear() know if
the container has been enabled because if it has not been, then
put_page() must not be called on TCEs from the TCE table. This situation
is not yet possible but it will after KVM acceleration patchset is
applied.

This changes code to work with physical addresses rather than linear
mapping addresses for better code readability. Following patches will
add an xchg() callback for an IOMMU table which will accept/return
physical addresses (unlike current tce_build()) which will eliminate
redundant conversions.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11 15:14:56 +10:00
Alexey Kardashevskiy
3c56e822f8 vfio: powerpc/spapr: Disable DMA mappings on disabled container
At the moment DMA map/unmap requests are handled irrespective to
the container's state. This allows the user space to pin memory which
it might not be allowed to pin.

This adds checks to MAP/UNMAP that the container is enabled, otherwise
-EPERM is returned.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11 15:14:56 +10:00
Alexey Kardashevskiy
2d270df8f7 vfio: powerpc/spapr: Move locked_vm accounting to helpers
There moves locked pages accounting to helpers.
Later they will be reused for Dynamic DMA windows (DDW).

This reworks debug messages to show the current value and the limit.

This stores the locked pages number in the container so when unlocking
the iommu table pointer won't be needed. This does not have an effect
now but it will with the multiple tables per container as then we will
allow attaching/detaching groups on fly and we may end up having
a container with no group attached but with the counter incremented.

While we are here, update the comment explaining why RLIMIT_MEMLOCK
might be required to be bigger than the guest RAM. This also prints
pid of the current process in pr_warn/pr_debug.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11 15:14:55 +10:00
Alexey Kardashevskiy
00663d4ee0 vfio: powerpc/spapr: Use it_page_size
This makes use of the it_page_size from the iommu_table struct
as page size can differ.

This replaces missing IOMMU_PAGE_SHIFT macro in commented debug code
as recently introduced IOMMU_PAGE_XXX macros do not include
IOMMU_PAGE_SHIFT.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[aw: for the vfio related changes]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11 15:14:55 +10:00
Alexey Kardashevskiy
e432bc7e15 vfio: powerpc/spapr: Check that IOMMU page is fully contained by system page
This checks that the TCE table page size is not bigger that the size of
a page we just pinned and going to put its physical address to the table.

Otherwise the hardware gets unwanted access to physical memory between
the end of the actual page and the end of the aligned up TCE page.

Since compound_order() and compound_head() work correctly on non-huge
pages, there is no need for additional check whether the page is huge.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11 15:14:55 +10:00
Alexey Kardashevskiy
9b14a1ff86 vfio: powerpc/spapr: Move page pinning from arch code to VFIO IOMMU driver
This moves page pinning (get_user_pages_fast()/put_page()) code out of
the platform IOMMU code and puts it to VFIO IOMMU driver where it belongs
to as the platform code does not deal with page pinning.

This makes iommu_take_ownership()/iommu_release_ownership() deal with
the IOMMU table bitmap only.

This removes page unpinning from iommu_take_ownership() as the actual
TCE table might contain garbage and doing put_page() on it is undefined
behaviour.

Besides the last part, the rest of the patch is mechanical.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-11 15:14:55 +10:00
Alex Williamson
20f300175a vfio/pci: Fix racy vfio_device_get_from_dev() call
Testing the driver for a PCI device is racy, it can be all but
complete in the release path and still report the driver as ours.
Therefore we can't trust drvdata to be valid.  This race can sometimes
be seen when one port of a multifunction device is being unbound from
the vfio-pci driver while another function is being released by the
user and attempting a bus reset.  The device in the remove path is
found as a dependent device for the bus reset of the release path
device, the driver is still set to vfio-pci, but the drvdata has
already been cleared, resulting in a null pointer dereference.

To resolve this, fix vfio_device_get_from_dev() to not take the
dev_get_drvdata() shortcut and instead traverse through the
iommu_group, vfio_group, vfio_device path to get a reference we
can trust.  Once we have that reference, we know the device isn't
in transition and we can test to make sure the driver is still what
we expect, so that we don't interfere with devices we don't own.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-06-09 10:08:57 -06:00
Will Deacon
8a0a01bff8 drivers/vfio: Allow type-1 IOMMU instantiation on top of an ARM SMMUv3
The ARM SMMUv3 driver is compatible with the notion of a type-1 IOMMU in
VFIO.

This patch allows VFIO_IOMMU_TYPE1 to be selected if ARM_SMMU_V3=y.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-05-29 11:12:40 +02:00
Gavin Shan
68cbbc3a9d drivers/vfio: Support EEH error injection
The patch adds one more EEH sub-command (VFIO_EEH_PE_INJECT_ERR)
to inject the specified EEH error, which is represented by
(struct vfio_eeh_pe_err), to the indicated PE for testing purpose.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-05-12 20:33:35 +10:00
Alex Williamson
db7d4d7f40 vfio: Fix runaway interruptible timeout
Commit 13060b64b8 ("vfio: Add and use device request op for vfio
bus drivers") incorrectly makes use of an interruptible timeout.
When interrupted, the signal remains pending resulting in subsequent
timeouts occurring instantly.  This makes the loop spin at a much
higher rate than intended.

Instead of making this completely non-interruptible, we can change
this into a sort of interruptible-once behavior and use the "once"
to log debug information.  The driver API doesn't allow us to abort
and return an error code.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Fixes: 13060b64b8
Cc: stable@vger.kernel.org # v4.0
2015-05-01 16:31:41 -06:00
Alex Williamson
5f55d2ae69 vfio-pci: Log device requests more verbosely
Log some clues indicating whether the user is receiving device
request interfaces or not listening.  This can help indicate why a
driver unbind is blocked or explain why QEMU automatically unplugged
a device from the VM.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-05-01 14:00:53 -06:00
Alex Williamson
5a0ff17741 vfio-pci: Fix use after free
Reported by 0-day test infrastructure.

Fixes: ecaa1f6a01 ("vfio-pci: Add VGA arbiter client")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-08 08:11:51 -06:00
Alex Williamson
6eb7018705 vfio-pci: Move idle devices to D3hot power state
We can save some power by putting devices that are bound to vfio-pci
but not in use by the user in the D3hot power state.  Devices get
woken into D0 when opened by the user.  Resets return the device to
D0, so we need to re-apply the low power state after a bus reset.
It's tempting to try to use D3cold, but we have no reason to inhibit
hotplug of idle devices and we might get into a loop of having the
device disappear before we have a chance to try to use it.

A new module parameter allows this feature to be disabled if there are
devices that misbehave as a result of this change.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-07 11:14:46 -06:00
Alex Williamson
561d72ddbb vfio-pci: Remove warning if try-reset fails
As indicated in the comment, this is not entirely uncommon and
causes user concern for no reason.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-07 11:14:44 -06:00
Alex Williamson
80c7e8cc2a vfio-pci: Allow PCI IDs to be specified as module options
This copies the same support from pci-stub for exactly the same
purpose, enabling a set of PCI IDs to be automatically added to the
driver's dynamic ID table at module load time.  The code here is
pretty simple and both vfio-pci and pci-stub are fairly unique in
being meta drivers, capable of attaching to any device, so there's no
attempt made to generalize the code into pci-core.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-07 11:14:43 -06:00
Alex Williamson
ecaa1f6a01 vfio-pci: Add VGA arbiter client
If VFIO VGA access is disabled for the user, either by CONFIG option
or module parameter, we can often opt-out of VGA arbitration.  We can
do this when PCI bridge control of VGA routing is possible.  This
means that we must have a parent bridge and there must only be a
single VGA device below that bridge.  Fortunately this is the typical
case for discrete GPUs.

Doing this allows us to minimize the impact of additional GPUs, in
terms of VGA arbitration, when they are only used via vfio-pci for
non-VGA applications.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-07 11:14:41 -06:00
Alex Williamson
88c0dead9f vfio-pci: Add module option to disable VGA region access
Add a module option so that we don't require a CONFIG change and
kernel rebuild to disable VGA support.  Not only can VGA support be
troublesome in itself, but by disabling it we can reduce the impact
to host devices by doing a VGA arbitration opt-out.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-07 11:14:40 -06:00
Alex Williamson
71be3423a6 vfio: Split virqfd into a separate module for vfio bus drivers
An unintended consequence of commit 42ac9bd18d ("vfio: initialize
the virqfd workqueue in VFIO generic code") is that the vfio module
is renamed to vfio_core so that it can include both vfio and virqfd.
That's a user visible change that may break module loading scritps
and it imposes eventfd support as a dependency on the core vfio code,
which it's really not.  virqfd is intended to be provided as a service
to vfio bus drivers, so instead of wrapping it into vfio.ko, we can
make it a stand-alone module toggled by vfio bus drivers.  This has
the additional benefit of removing initialization and exit from the
core vfio code.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-17 08:33:38 -06:00
kbuild test robot
66fdc052d7 vfio: virqfd_lock can be static
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-17 08:20:31 -06:00
Zhen Lei
2f51bf4be9 vfio: put off the allocation of "minor" in vfio_create_group
The next code fragment "list_for_each_entry" is not depend on "minor". With this
patch, the free of "minor" in "list_for_each_entry" can be reduced, and there is
no functional change.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:56 -06:00
Antonios Motakis
a7fa7c77cf vfio/platform: implement IRQ masking/unmasking via an eventfd
With this patch the VFIO user will be able to set an eventfd that can be
used in order to mask and unmask IRQs of platform devices.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:55 -06:00
Antonios Motakis
42ac9bd18d vfio: initialize the virqfd workqueue in VFIO generic code
Now we have finally completely decoupled virqfd from VFIO_PCI. We can
initialize it from the VFIO generic code, in order to safely use it from
multiple independent VFIO bus drivers.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:54 -06:00
Antonios Motakis
7e992d6927 vfio: move eventfd support code for VFIO_PCI to a separate file
The virqfd functionality that is used by VFIO_PCI to implement interrupt
masking and unmasking via an eventfd, is generic enough and can be reused
by another driver. Move it to a separate file in order to allow the code
to be shared.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:54 -06:00
Antonios Motakis
09bbcb8810 vfio: pass an opaque pointer on virqfd initialization
VFIO_PCI passes the VFIO device structure *vdev via eventfd to the handler
that implements masking/unmasking of IRQs via an eventfd. We can replace
it in the virqfd infrastructure with an opaque type so we can make use
of the mechanism from other VFIO bus drivers.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:53 -06:00
Antonios Motakis
9269c393e7 vfio: add local lock for virqfd instead of depending on VFIO PCI
The Virqfd code needs to keep accesses to any struct *virqfd safe, but
this comes into play only when creating or destroying eventfds, so sharing
the same spinlock with the VFIO bus driver is not necessary.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:52 -06:00
Antonios Motakis
bb78e9eaab vfio: virqfd: rename vfio_pci_virqfd_init and vfio_pci_virqfd_exit
The functions vfio_pci_virqfd_init and vfio_pci_virqfd_exit are not really
PCI specific, since we plan to reuse the virqfd code with more VFIO drivers
in addition to VFIO_PCI.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
[Baptiste Reynal: Move rename vfio_pci_virqfd_init and vfio_pci_virqfd_exit
from "vfio: add a vfio_ prefix to virqfd_enable and virqfd_disable and export"]
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:52 -06:00
Antonios Motakis
bdc5e1021b vfio: add a vfio_ prefix to virqfd_enable and virqfd_disable and export
We want to reuse virqfd functionality in multiple VFIO drivers; before
moving these functions to core VFIO, add the vfio_ prefix to the
virqfd_enable and virqfd_disable functions, and export them so they can
be used from other modules.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:51 -06:00
Antonios Motakis
06211b40ce vfio/platform: support for level sensitive interrupts
Level sensitive interrupts are exposed as maskable and automasked
interrupts and are masked and disabled automatically when they fire.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
[Baptiste Reynal: Move masked interrupt initialization from "vfio/platform:
trigger an interrupt via eventfd"]
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:50 -06:00
Antonios Motakis
57f972e2b3 vfio/platform: trigger an interrupt via eventfd
This patch allows to set an eventfd for a platform device's interrupt,
and also to trigger the interrupt eventfd from userspace for testing.
Level sensitive interrupts are marked as maskable and are handled in
a later patch. Edge triggered interrupts are not advertised as maskable
and are implemented here using a simple and efficient IRQ handler.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
[Baptiste Reynal: fix masked interrupt initialization]
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:50 -06:00
Antonios Motakis
9a36321c8d vfio/platform: initial interrupts support code
This patch is a skeleton for the VFIO_DEVICE_SET_IRQS IOCTL, around which
most IRQ functionality is implemented in VFIO.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:49 -06:00
Antonios Motakis
682704c41e vfio/platform: return IRQ info
Return information for the interrupts exposed by the device.
This patch extends VFIO_DEVICE_GET_INFO with the number of IRQs
and enables VFIO_DEVICE_GET_IRQ_INFO.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:48 -06:00
Antonios Motakis
fad4d5b1f0 vfio/platform: support MMAP of MMIO regions
Allow to memory map the MMIO regions of the device so userspace can
directly access them. PIO regions are not being handled at this point.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:48 -06:00
Antonios Motakis
6e3f264560 vfio/platform: read and write support for the device fd
VFIO returns a file descriptor which we can use to manipulate the memory
regions of the device. Usually, the user will mmap memory regions that are
addressable on page boundaries, however for memory regions where this is
not the case we cannot provide mmap functionality due to security concerns.
For this reason we also allow to use read and write functions to the file
descriptor pointing to the memory regions.

We implement this functionality only for MMIO regions of platform devices;
PIO regions are not being handled at this point.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:47 -06:00