Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Modernize and harden the code path that parses an RPC Reply
message.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Modernize and harden the code path that constructs each RPC Call
message.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Reduce dprintk noise by removing dprintk() call sites
from hot path that do not report exceptions. These are usually
replaceable with function graph tracing.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Having access to the controlling rpc_rqst means a trace point in the
XDR code can report:
- the XID
- the task ID and client ID
- the p_name of RPC being processed
Subsequent patches will introduce such trace points.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Init missing debug member magic with CRED_MAGIC.
Signed-off-by: Santosh kumar pradhan <santoshkumar.pradhan@wdc.com>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
1/ discard 'struct unx_cred'. We don't need any data that
is not already in 'struct rpc_cred'.
2/ Don't keep these creds in a hash table. When a credential
is needed, simply allocate it. When not needed, discard it.
This can easily be faster than performing a lookup on
a shared hash table.
As the lookup can happen during write-out, use a mempool
to ensure forward progress.
This means that we cannot compare two credentials for
equality by comparing the pointers, but we never do that anyway.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This now always just does get_rpccred(), so we
don't need an operation pointer to know to do that.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
SUNRPC has two sorts of credentials, both of which appear as
"struct rpc_cred".
There are "generic credentials" which are supplied by clients
such as NFS and passed in 'struct rpc_message' to indicate
which user should be used to authorize the request, and there
are low-level credentials such as AUTH_NULL, AUTH_UNIX, AUTH_GSS
which describe the credential to be sent over the wires.
This patch replaces all the generic credentials by 'struct cred'
pointers - the credential structure used throughout Linux.
For machine credentials, there is a special 'struct cred *' pointer
which is statically allocated and recognized where needed as
having a special meaning. A look-up of a low-level cred will
map this to a machine credential.
Signed-off-by: NeilBrown <neilb@suse.com>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
NFS needs to know when a credential is about to expire so that
it can modify write-back behaviour to finish the write inside the
expiry time.
It currently uses functions in SUNRPC code which make use of a
fairly complex callback scheme and flags in the generic credientials.
As I am working to discard the generic credentials, this has to change.
This patch moves the logic into NFS, in part by finding and caching
the low-level credential in the open_context. We then make direct
cred-api calls on that.
This makes the code much simpler and removes a dependency on generic
rpc credentials.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The credential passed in rpc_message.rpc_cred is always a
generic credential except in one instance.
When gss_destroying_context() calls rpc_call_null(), it passes
a specific credential that it needs to destroy.
In this case the RPC acts *on* the credential rather than
being authorized by it.
This special case deserves explicit support and providing that will
mean that rpc_message.rpc_cred is *always* generic, allowing
some optimizations.
So add "tk_op_cred" to rpc_task and "rpc_op_cred" to the setup data.
Use this to pass the cred down from rpc_call_null(), and have
rpcauth_bindcred() notice it and bind it in place.
Credit to kernel test robot <fengguang.wu@intel.com> for finding
a bug in earlier version of this patch.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In almost all cases the credential stored in rpc_message.rpc_cred
is a "generic" credential. One of the two expections is when an
AUTH_NULL credential is used such as for RPC ping requests.
To improve consistency, don't pass an explicit credential in
these cases, but instead pass NULL and set a task flag,
similar to RPC_TASK_ROOTCREDS, which requests that NULL credentials
be used by default.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When NFS creates a machine credential, it is a "generic" credential,
not tied to any auth protocol, and is really just a container for
the princpal name.
This doesn't get linked to a genuine credential until rpcauth_bindcred()
is called.
The lookup always succeeds, so various places that test if the machine
credential is NULL, are pointless.
As a step towards getting rid of generic credentials, this patch gets
rid of generic machine credentials. The nfs_client and rpc_client
just hold a pointer to a constant principal name.
When a machine credential is wanted, a special static 'struct rpc_cred'
pointer is used. rpcauth_bindcred() recognizes this, finds the
principal from the client, and binds the correct credential.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We can use cred->groupinfo (from the 'struct cred') instead.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The SUNRPC credential framework was put together before
Linux has 'struct cred'. Now that we have it, it makes sense to
use it.
This first step just includes a suitable 'struct cred *' pointer
in every 'struct auth_cred' and almost every 'struct rpc_cred'.
The rpc_cred used for auth_null has a NULL 'struct cred *' as nothing
else really makes sense.
For rpc_cred, the pointer is reference counted.
For auth_cred it isn't. struct auth_cred are either allocated on
the stack, in which case the thread owns a reference to the auth,
or are part of 'struct generic_cred' in which case gc_base owns the
reference, and "acred" shares it.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We no longer need to worry about whether or not the entry is hashed in
order to figure out if the contents are valid. We only care whether or
not the refcount is non-zero.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Module removal is RCU safe by design, so we really have no need to
lock the auth_flavors[] array. Substitute a lockless scheme to
add/remove entries in the array, and then use rcu.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If a message has been encoded using RPCSEC_GSS, the server is
maintaining a window of sequence numbers that it considers valid.
The client should normally be tracking that window, and needs to
verify that the sequence number used by the message being transmitted
still lies inside the window of validity.
So far, we've been able to assume this condition would be realised
automatically, since the client has been encoding the message only
after taking the socket lock. Once we change that condition, we
will need the explicit check.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Smatch complains that "num" can be uninitialized when kstrtoul() returns
-ERANGE. It's true enough, but basically harmless in this case.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This turns rpc_auth_create_args into a const as it gets passed through the
auth stack.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Add #include <linux/cred.h> dependencies to all .c files rely on sched.h
doing that for them.
Note that even if the count where we need to add extra headers seems high,
it's still a net win, because <linux/sched.h> is included in over
2,200 files ...
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Don't found any place using the cr_magic.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
register_shrinker may return error when register fail, error out.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
1/ If we find an entry that is too young to be pruned,
return SHRINK_STOP to ensure we don't get called again.
This is more correct, and avoids wasting a little CPU time.
Prior to 3.12, it can prevent drop_slab() from spinning indefinitely.
2/ Return a precise number from rpcauth_cache_shrink_count(), rather than
rounding down to a multiple of 100 (of whatever sysctl_vfs_cache_pressure is).
This ensures that when we "echo 3 > /proc/sys/vm/drop_caches", this cache is
still purged, even if it has fewer than 100 entires.
Neither of these are really important, they just make behaviour
more predicatable, which can be helpful when debugging related issues.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Replace the generic code to hash the auth_cred with the call to
the auth-specific hash function in the rpc_authops struct.
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Author: Frank Sorenson <sorenson@redhat.com>
Date: 2016-06-27 13:55:48 -0500
sunrpc: Fix bit count when setting hashtable size to power-of-two
The hashtable size is incorrectly calculated as the next higher
power-of-two when being set to a power-of-two. fls() returns the
bit number of the most significant set bit, with the least
significant bit being numbered '1'. For a power-of-two, fls()
will return a bit number which is one higher than the number of bits
required, leading to a hashtable which is twice the requested size.
In addition, the value of (1 << nbits) will always be at least num,
so the test will never be true.
Fix the hash table size calculation to correctly set hashtable
size, and eliminate the unnecessary check.
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
A generic_cred can be used to look up a unx_cred or a gss_cred, so it's
not really safe to use the the generic_cred->acred->ac_flags to store
the NO_CRKEY_TIMEOUT flag. A lookup for a unx_cred triggered while the
KEY_EXPIRE_SOON flag is already set will cause both NO_CRKEY_TIMEOUT and
KEY_EXPIRE_SOON to be set in the ac_flags, leaving the user associated
with the auth_cred to be in a state where they're perpetually doing 4K
NFS_FILE_SYNC writes.
This can be reproduced as follows:
1. Mount two NFS filesystems, one with sec=krb5 and one with sec=sys.
They do not need to be the same export, nor do they even need to be from
the same NFS server. Also, v3 is fine.
$ sudo mount -o v3,sec=krb5 server1:/export /mnt/krb5
$ sudo mount -o v3,sec=sys server2:/export /mnt/sys
2. As the normal user, before accessing the kerberized mount, kinit with
a short lifetime (but not so short that renewing the ticket would leave
you within the 4-minute window again by the time the original ticket
expires), e.g.
$ kinit -l 10m -r 60m
3. Do some I/O to the kerberized mount and verify that the writes are
wsize, UNSTABLE:
$ dd if=/dev/zero of=/mnt/krb5/file bs=1M count=1
4. Wait until you're within 4 minutes of key expiry, then do some more
I/O to the kerberized mount to ensure that RPC_CRED_KEY_EXPIRE_SOON gets
set. Verify that the writes are 4K, FILE_SYNC:
$ dd if=/dev/zero of=/mnt/krb5/file bs=1M count=1
5. Now do some I/O to the sec=sys mount. This will cause
RPC_CRED_NO_CRKEY_TIMEOUT to be set:
$ dd if=/dev/zero of=/mnt/sys/file bs=1M count=1
6. Writes for that user will now be permanently 4K, FILE_SYNC for that
user, regardless of which mount is being written to, until you reboot
the client. Renewing the kerberos ticket (assuming it hasn't already
expired) will have no effect. Grabbing a new kerberos ticket at this
point will have no effect either.
Move the flag to the auth->au_flags field (which is currently unused)
and rename it slightly to reflect that it's no longer associated with
the auth_cred->ac_flags. Add the rpc_auth to the arg list of
rpcauth_cred_key_to_expire and check the au_flags there too. Finally,
add the inode to the arg list of nfs_ctx_key_to_expire so we can
determine the rpc_auth to pass to rpcauth_cred_key_to_expire.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We need to be able to call the generic_cred creator from different
contexts. Add a gfp_t parm to the crcreate operation and to
rpcauth_lookup_credcache. For now, we just push the gfp_t parms up
one level to the *_lookup_cred functions.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Most code already uses consts for the struct kernel_param_ops,
sweep the kernel for the last offending stragglers. Other than
include/linux/moduleparam.h and kernel/params.c all other changes
were generated with the following Coccinelle SmPL patch. Merge
conflicts between trees can be handled with Coccinelle.
In the future git could get Coccinelle merge support to deal with
patch --> fail --> grammar --> Coccinelle --> new patch conflicts
automatically for us on patches where the grammar is available and
the patch is of high confidence. Consider this a feature request.
Test compiled on x86_64 against:
* allnoconfig
* allmodconfig
* allyesconfig
@ const_found @
identifier ops;
@@
const struct kernel_param_ops ops = {
};
@ const_not_found depends on !const_found @
identifier ops;
@@
-struct kernel_param_ops ops = {
+const struct kernel_param_ops ops = {
};
Generated-by: Coccinelle SmPL
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Junio C Hamano <gitster@pobox.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: cocci@systeme.lip6.fr
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's always set to whatever CONFIG_SUNRPC_DEBUG is, so just use that.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
current_cred() can only be changed by 'current', and
cred->group_info is never changed. If a new group_info is
needed, a new 'cred' is created.
Consequently it is always safe to access
current_cred()->group_info
without taking any further references.
So drop the refcounting and the incorrect rcu_dereference().
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The new flag RPCAUTH_LOOKUP_RCU to credential lookup avoids locking,
does not take a reference on the returned credential, and returns
-ECHILD if a simple lookup was not possible.
The returned value can only be used within an rcu_read_lock protected
region.
The main user of this is the new rpc_lookup_cred_nonblock() which
returns a pointer to the current credential which is only rcu-safe (no
ref-count held), and might return -ECHILD if allocation was required.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
In some cases where the credentials are not often reused, we may want
to limit their total number just in order to make the negative lookups
in the hash table more manageable.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
...and add an new rpc_auth function to call it when it exists. This
is only applicable for AUTH_GSS mechanisms, so we only specify this
for those sorts of credentials.
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fix nfs4_negotiate_security to create an rpc_clnt used to test each SECINFO
returned pseudoflavor. Check credential creation (and gss_context creation)
which is important for RPC_AUTH_GSS pseudoflavors which can fail for multiple
reasons including mis-configuration.
Don't call nfs4_negotiate in nfs4_submount as it was just called by
nfs4_proc_lookup_mountpoint (nfs4_proc_lookup_common)
Signed-off-by: Andy Adamson <andros@netapp.com>
[Trond: fix corrupt return value from nfs_find_best_sec()]
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Convert the remaining couple of random shrinkers in the tree to the new
API.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@openvz.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch provides the RPC layer helper functions to allow NFS to manage
data in the face of expired credentials - such as avoiding buffered WRITEs
and COMMITs when the gss context will expire before the WRITEs are flushed
and COMMITs are sent.
These helper functions enable checking the expiration of an underlying
credential key for a generic rpc credential, e.g. the gss_cred gss context
gc_expiry which for Kerberos is set to the remaining TGT lifetime.
A new rpc_authops key_timeout is only defined for the generic auth.
A new rpc_credops crkey_to_expire is only defined for the generic cred.
A new rpc_credops crkey_timeout is only defined for the gss cred.
Set a credential key expiry watermark, RPC_KEY_EXPIRE_TIMEO set to 240 seconds
as a default and can be set via a module parameter as we need to ensure there
is time for any dirty data to be flushed.
If key_timeout is called on a credential with an underlying credential key that
will expire within watermark seconds, we set the RPC_CRED_KEY_EXPIRE_SOON
flag in the generic_cred acred so that the NFS layer can clean up prior to
key expiration.
Checking a generic credential's underlying credential involves a cred lookup.
To avoid this lookup in the normal case when the underlying credential has
a key that is valid (before the watermark), a notify flag is set in
the generic credential the first time the key_timeout is called. The
generic credential then stops checking the underlying credential key expiry, and
the underlying credential (gss_cred) match routine then checks the key
expiration upon each normal use and sets a flag in the associated generic
credential only when the key expiration is within the watermark.
This in turn signals the generic credential key_timeout to perform the extra
credential lookup thereafter.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The clnt->cl_principal is being used exclusively to store the service
target name for RPCSEC_GSS/krb5 callbacks. Replace it with something that
is stored only in the RPCSEC_GSS-specific code.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
RPC_AUTH_MAXFLAVOR is an invalid flavor, on purpose. Don't allow
any processing whatsoever if a caller passes it to rpcauth_create()
or rpcauth_get_gssinfo().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up. This matches a similar API for the client side, and
keeps ULP fingers out the of the GSS mech switch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
A SECINFO reply may contain flavors whose kernel module is not
yet loaded by the client's kernel. A new RPC client API, called
rpcauth_get_pseudoflavor(), is introduced to do proper checking
for support of a security flavor.
When this API is invoked, the RPC client now tries to load the
module for each flavor first before performing the "is this
supported?" check. This means if a module is available on the
client, but has not been loaded yet, it will be loaded and
registered automatically when the SECINFO reply is processed.
The new API can take a full GSS tuple (OID, QoP, and service).
Previously only the OID and service were considered.
nfs_find_best_sec() is updated to verify all flavors requested in a
SECINFO reply, including AUTH_NULL and AUTH_UNIX. Previously these
two flavors were simply assumed to be supported without consulting
the RPC client.
Note that the replaced version of nfs_find_best_sec() can return
RPC_AUTH_MAXFLAVOR if the server returns a recognized OID but an
unsupported "service" value. nfs_find_best_sec() now returns
RPC_AUTH_UNIX in this case.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
