[Description]
- For SubVP pipe split case we need to use a minimial transition
when opening MPO video since we are transitioning from 4 pipes
to 3 pipes where an OPP for a previous MPCC will change
- Also save and restore mall config when doing fast_validate in case
there was a shallow copy of the dc->current_state
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Analyzer shows incorrect V freq in MSA for some large timing.
[how]
Cast an 32 bit integer to uint64_t before multiplication to avoid
integer overflow for a very large timing.
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
When enabling phantom pipe on a pipe that was previously
using immediate flip, we have to disable GSL or this will
prevent the update from taking place right away on the phantom
pipe when we enable it in FW
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DML does not take the fact that dcn315 does not have enough detile
buffer to max all pipes. This change adds a workaround to apply
the same logic DC does when calculating detile buffer size in DML.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
In some cases, DCFCLK hardmin requests are not acknowledged by SMU as
the requested clock does not have a compatible ratio with current FCLK,
and it cannot be changed as FCLK P-state is not allowed.
[HOW?]
Allow FCLK p-state change prior to changing DCFCLK hardmin.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why?]
Currently SubVP programming is only done in commit_planes_for_stream, as
it was expected only this call would add/remove planes from a
display.
[How?]
Add SubVP programming to dc_commit_state_no_check.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enc314_stream_encoder_dp_blank is only used in dcn314_dio_stream_encoder.c now,
change it to static.
Fixes: c55bf690fe ("drm/amd/display: Add explicit FIFO disable for DP blank")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
We only want to commit the SubVP config to DMCUB
after the main and phantom pipe programming has
completed. Commiting the state early can cause
issues such as P-State being allowed by the HW
early which causes the SubVP state machine to
go into a bad state
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Enabling Z10 optimizations allows DMUB to disable the OTG during PSR
link-off. This theoretically saves power by putting more of the display
hardware to sleep. However, we observe that with PSR SU, it causes
visual artifacts, higher power usage, and potential system hang.
This is partly due to an odd behavior with the VStartup interrupt used
to signal DRM vblank events. If the OTG is toggled on/off during a PSR
link on/off cycle, the vstartup interrupt fires twice in quick
succession. This generates incorrectly timed vblank events.
Additionally, it can cause cursor updates to generate visual artifacts.
Note that this is not observed with PSR1 since PSR is fully disabled
when there are vblank event requestors. Cursor updates are also
artifact-free, likely because there are no selectively-updated (SU)
frames that can generate artifacts.
[How]
A potential solution is to disable z10 idle optimizations only when fast
updates (flips & cursor updates) are committed. A mechanism to do so
would require some thoughtful design. Let's just disable idle
optimizations for PSR2 for now.
Fixes: 7cc191ee76 ("drm/amd/display: Implement MPO PSR SU")
Reported-by: August Wikerfors <git@augustwikerfors.se>
Link: https://lore.kernel.org/r/c1f8886a-5624-8f49-31b1-e42b6d20dcf5@augustwikerfors.se/
Tested-by: August Wikerfors <git@augustwikerfors.se>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Address the following error:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c: In function ‘dc_stream_remove_writeback’:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:527:55: error: array subscript [0, 0] is outside array bounds of ‘struct dc_writeback_info[1]’ [-Werror=array-bounds]
527 | stream->writeback_info[j] = stream->writeback_info[i];
| ~~~~~~~~~~~~~~~~~~~~~~^~~
In file included from ./drivers/gpu/drm/amd/amdgpu/../display/dc/dc.h:1269,
from ./drivers/gpu/drm/amd/amdgpu/../display/dc/inc/core_types.h:29,
from ./drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dc_common.h:29,
from drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:27:
./drivers/gpu/drm/amd/amdgpu/../display/dc/dc_stream.h:241:34: note: while referencing ‘writeback_info’
241 | struct dc_writeback_info writeback_info[MAX_DWB_PIPES];
|
Currently, we aren't checking to see if j remains within
writeback_info[]'s bounds. So, add a check to make sure that we aren't
overflowing the buffer.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is used to fix following compiling error that occurs in
some old kernels.
error: ‘for’ loop initial declarations are only allowed in C99 mode
for (int i = 0; i < dc->res_pool->res_cap->num_dsc; i++) {
Signed-off-by: Asher Song <Asher.Song@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Previously, LTTPR mode was decided during detection which makes
link training inflexible as mode can't be dynamically changed.
[HOW]
-Remove lttpr_mode from link struct, and move to link training settings
-Defer choosing LTTPR mode until link training
Other DP changes included:
-Only use fixed vs/pe link training sequence for 8b/10b encoding
-Restrict fixed vs aux timeout workaround to Yellow Carp family
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- LTTPR mode can be be dynamically changed
- fixes divide by zero error
- features able to use same interface to update cursor info
- fixes for llvm compilation issues
- Fixes DIO FIFO underflow and other FIFO errors
- Partially valid EDIDs handled properly
- Phatom pipes are skipped when checking pending flip
- Fixed audio on audio on display after unplugging
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We only gain a benefit of using the ODM2:1 dynamic policy if it allow us
to decrease DISPCLK to use the VMIN freq. If the display config can
already achieve VMIN DISPCLK freq without ODM2:1, don't apply the
policy.
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Several transitions were fixed that will allow Dynamic ODM and MPO
transitions to be supported on DCN32.
1) Due to resource limitations, in certain scenarios that require an MPO
plane to be split, the features cannot be combined with the current
policy. This is due to unsafe transitions being required (OPP instance
per MPCC being switched on active pipe is not supported by DCN), to
support the split plane with ODM active as it moves across the viewport.
Dynamic ODM will now be disabled when MPO is required.
2) When exiting MPO and re-entering ODM, DC assigns an inactive pipe for
the next ODM pipe, which under previous power gating policy would result
in programming a gated DSC HW block. New policy dynamically
gates/un-gates DSC blocks when Dynamic ODM is active to support
transitions on DCN32 only.
3) Entry and exit from 3 plane MPO and Dynamic ODM requires a minimal
transition so that all pipes which require their MPCC OPP instance to
be changed have a full frame to be disabled before reprogramming. To
solve this, the Dynamic ODM policy now utilizes minimal state
transitions when entering or exiting 3 plane scenarios.
4) Various fixes to DCN32 pipe merge/split algorithm to support Dynamic
ODM and MPO transitions.
In summary, this commit fixes various transitions to support ODM->MPO
and MPO->ODM.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
vid stream control is double bufferred, if we don't wait for video
stream enable set to 0, we may get temporary image corruption
showing on the stream when setting PIXEL_TO_SYMBOL_FIFO_ENABLE to 0.
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For individual feature testing, PMFW may not report all clock
values back. Driver will default them to 0 but this will
cause the BB table to be skipped and default to one state
with max clocks.
[How]
Add helper function to scan through initial clock values and
populate them with default clock limits so that BB table
can be built.
Add dpm_enabled flag to check when DPM is not enabled and
to trigger helper function.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dc: cursor info update: phase 1:
[Why]
Different feature might need to update cursor info, but
With different approaches.
To unify this diversity problem, all features should use
The same interface to update cursor.
Reviewed-by: Reza Amini <reza.amini@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Max Tseng <max.tseng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Programming pixel rate divider when FIFO is enabled can cause FIFO error.
[How]
Skip divider programming when divider values are the same to prevent FIFO
error.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Revert "dc: skip audio setup when audio stream is enabled"
This reverts commit 65fbfb02c2
[why]
We have minimal pipe split transition method to avoid pipe
allocation outage.However, this method will invoke audio setup
which cause audio output stuck once pipe reallocate.
[how]
skip audio setup for pipelines which audio stream has been enabled
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We rely on DMCUB to do this when disabling the link but it should
actually come before we disable the DP VID stream.
If we don't then the FIFO can end up with underflow that persists
the next time it's enabled.
[How]
Add a DCN314 specific blank sequence that will disable the DIG FIFO
first.
Reviewed-by: Syed Hassan <Syed.Hassan@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The DIO FIFO will underflow if we turn off the OTG before we turn
off the FIFO.
Since this happens as part of the OTG workaround and we don't reset
the FIFO afterwards we see the error persist.
[How]
Add disable FIFO before the disable CRTC and enable FIFO after enabling
the CRTC.
Reviewed-by: Syed Hassan <Syed.Hassan@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Partially valid EDIDs on MST sinks are treated the same way as broken
EDIDs or read failures and result in a fallback EDID being used instead.
[How]
If edid_status is EDID_PARTIAL_VALID, prefer to use the valid EDID
blocks instead of using a fallback EDID.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Avoids a race condition where DIO FIFO can underflow due to no incoming
data available.
[How]
Shift the FIFO enable below stream enable.
Make sure fullness level is written before the DIO reset takes place
and that we're not doing it twice.
Reviewed-by: Syed Hassan <Syed.Hassan@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Only a single VLINE interrupt is available so interface should not
expose the second one which is used by DMU firmware.
[how]
Remove references to periodic_interrupt1 and VLINE1 from DC interfaces.
Reviewed-by: Jaehyun Chung <jaehyun.chung@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Most of the arguments are identical between the two call sites and they
can be accessed through the 'struct vba_vars_st' pointer. This reduces
the total amount of stack space that
dml314_ModeSupportAndSystemConfigurationFull() uses by 112 bytes with
LLVM 16 (1976 -> 1864), helping clear up the following clang warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_mode_vba_314.c:4020:6: error: stack frame size (2216) exceeds limit (2048) in 'dml314_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
void dml314_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
^
1 error generated.
Link: https://github.com/ClangBuiltLinux/linux/issues/1710
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Tested-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
