With very old libc headers the inclusion of sys/types.h causes conflicts
with linux/types.h. Since the latter is not required anyway, remove it
from the source files. If any of the headers really needs linux/types.h
it has to include it itself.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are a bunch of USB fixes for 3.13-rc3.
Nothing major, but we seem to have an argument about a XHCI fix, so I'm not
including a revert that Sarah requested, because that breaks a USB network
driver, and I can't revert the USB network driver fix without reintroducing
other bugs that it fixed. So as it is, everything should now be
working. Worse case, I can revert the XHCI fix before 3.13-final is
out, but it seems to work well here with my testing, so all should be
good.
Other than that, some driver updates based on reports.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlKiEuYACgkQMUfUDdst+ymE8ACgnDT8s4FtrYfoyOo5K4TVTRaZ
S2wAn3+Xa2TX1Sym+ltJry7N1jRnY2Qy
=JUaB
-----END PGP SIGNATURE-----
Merge tag 'usb-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a bunch of USB fixes for 3.13-rc3.
Nothing major, but we seem to have an argument about a XHCI fix, so
I'm not including a revert that Sarah requested, because that breaks a
USB network driver, and I can't revert the USB network driver fix
without reintroducing other bugs that it fixed. So as it is,
everything should now be working. Worse case, I can revert the XHCI
fix before 3.13-final is out, but it seems to work well here with my
testing, so all should be good.
Other than that, some driver updates based on reports"
* tag 'usb-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
usb: hub: Use correct reset for wedged USB3 devices that are NOTATTACHED
usb: ohci-pxa27x: include linux/dma-mapping.h
USB: cdc-acm: Added support for the Lenovo RD02-D400 USB Modem
usb: tools: fix a regression issue that gcc can't link to pthread
USB: switch maintainership of chipidea to Peter
USB: pl2303: fixed handling of CS5 setting
USB: ftdi_sio: fixed handling of unsupported CSIZE setting
USB: mos7840: correct handling of CS5 setting
USB: spcp8x5: correct handling of CS5 setting
usb: wusbcore: fix deadlock in wusbhc_gtk_rekey
usb: wusbcore: do device lookup while holding the hc mutex
usb: wusbcore: send keepalives to unauthenticated devices
USB: option: support new huawei devices
USB: serial: option: blacklist interface 1 for Huawei E173s-6
usb: xhci: Link TRB must not occur within a USB payload burst
usb: gadget: f_mass_storage: call try_to_freeze only when its safe
usb: gadget: tcm_usb_gadget: mark bot_cleanup_old_alt static
usb: gadget: ffs: fix sparse warning
usb: gadget: zero: module parameters can be static
usb: gadget: storage: fix sparse warning
...
Reproduce:
ray@hr-bak:~/usb$ make -C tools/usb/
make: Entering directory `/home/ray/usb/tools/usb'
gcc -Wall -Wextra -g -lpthread -I../include -o testusb testusb.c
/tmp/cc0EMxfy.o: In function `main':
/home/ray/usb/tools/usb/testusb.c:508: undefined reference to `pthread_create'
/home/ray/usb/tools/usb/testusb.c:531: undefined reference to `pthread_join'
collect2: error: ld returned 1 exit status
make: *** [testusb] Error 1
make: Leaving directory `/home/ray/usb/tools/usb'
Comments:
In the latest version (4.7.3) of gcc compiler, it requres that
libraries must follow the object or source files like below:
"gcc hello.c -lpthread" instead of "gcc -lpthread hello.c"
And it isn't encountered at gcc version 4.7.2.
So this patch fix to move the pthread option after testusb.c.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull perf fixes from Ingo Molnar:
"Misc kernel and tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools lib traceevent: Fix conversion of pointer to integer of different size
perf/trace: Properly use u64 to hold event_id
perf: Remove fragile swevent hlist optimization
ftrace, perf: Avoid infinite event generation loop
tools lib traceevent: Fix use of multiple options in processing field
perf header: Fix possible memory leaks in process_group_desc()
perf header: Fix bogus group name
perf tools: Tag thread comm as overriden
idlestates in sysfs are counted from 0.
This fixes a wrong error message.
Current behavior on a machine with 4 sleep states is:
cpupower idle-set -e 4
Idlestate 4 enabled on CPU 0
-----Wrong---------------------
cpupower idle-set -e 5
Idlestate enabling not supported by kernel
-----Must and now will be -----
cpupower idle-set -e 5
Idlestate 6 not available on CPU 0
-------------------------------
cpupower idle-set -e 6
Idlestate 6 not available on CPU 0
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The cpupower idle-set subcommand was introduce recently.
This patch provides the missing manpage.
If cpupower is properly installed it will show up automatically
(similar to git), when invoking:
cpupower help idle-set
or
cpupower idle-set --help
Some parts have been taken over and adjusted from
git commit 62d6ae880e
documentation submitted by Carsten Emde.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- ACPI-based device hotplug fixes for issues introduced recently and
a fix for an older error code path bug in the ACPI PCI host bridge
driver.
- Fix for recently broken OMAP cpufreq build from Viresh Kumar.
- Fix for a recent hibernation regression related to s2disk.
- Fix for a locking-related regression in the ACPI EC driver from
Puneet Kumar.
- System suspend error code path fix related to runtime PM and
runtime PM documentation update from Ulf Hansson.
- cpufreq's conservative governor fix from Xiaoguang Chen.
- New processor IDs for intel_idle and turbostat and removal of
an obsolete Kconfig option from Len Brown.
- New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and
ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg.
- Removal of several ACPI video DMI blacklist entries that are not
necessary any more from Aaron Lu.
- Rework of the ACPI companion representation in struct device and
code cleanup related to that change from Rafael J Wysocki,
Lan Tianyu and Jarkko Nikula.
- Fixes for assigning names to ACPI-enumerated I2C and SPI devices
from Jarkko Nikula.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=QMp+
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI and power management updates from Rafael Wysocki:
- ACPI-based device hotplug fixes for issues introduced recently and a
fix for an older error code path bug in the ACPI PCI host bridge
driver
- Fix for recently broken OMAP cpufreq build from Viresh Kumar
- Fix for a recent hibernation regression related to s2disk
- Fix for a locking-related regression in the ACPI EC driver from
Puneet Kumar
- System suspend error code path fix related to runtime PM and runtime
PM documentation update from Ulf Hansson
- cpufreq's conservative governor fix from Xiaoguang Chen
- New processor IDs for intel_idle and turbostat and removal of an
obsolete Kconfig option from Len Brown
- New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and
ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg
- Removal of several ACPI video DMI blacklist entries that are not
necessary any more from Aaron Lu
- Rework of the ACPI companion representation in struct device and code
cleanup related to that change from Rafael J Wysocki, Lan Tianyu and
Jarkko Nikula
- Fixes for assigning names to ACPI-enumerated I2C and SPI devices from
Jarkko Nikula
* tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
PCI / hotplug / ACPI: Drop unused acpiphp_debug declaration
ACPI / scan: Set flags.match_driver in acpi_bus_scan_fixed()
ACPI / PCI root: Clear driver_data before failing enumeration
ACPI / hotplug: Fix PCI host bridge hot removal
ACPI / hotplug: Fix acpi_bus_get_device() return value check
cpufreq: governor: Remove fossil comment in the cpufreq_governor_dbs()
ACPI / video: clean up DMI table for initial black screen problem
ACPI / EC: Ensure lock is acquired before accessing ec struct members
PM / Hibernate: Do not crash kernel in free_basic_memory_bitmaps()
ACPI / AC: Remove struct acpi_device pointer from struct acpi_ac
spi: Use stable dev_name for ACPI enumerated SPI slaves
i2c: Use stable dev_name for ACPI enumerated I2C slaves
ACPI: Provide acpi_dev_name accessor for struct acpi_device device name
ACPI / bind: Use (put|get)_device() on ACPI device objects too
ACPI: Eliminate the DEVICE_ACPI_HANDLE() macro
ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_node
cpufreq: OMAP: Fix compilation error 'r & ret undeclared'
PM / Runtime: Fix error path for prepare
PM / Runtime: Update documentation around probe|remove|suspend
cpufreq: conservative: set requested_freq to policy max when it is over policy max
...
gcc complaint on 32-bit system:
/home/acme/git/linux/tools/lib/traceevent/event-parse.c: In function ‘eval_num_arg’:
/home/acme/git/linux/tools/lib/traceevent/event-parse.c:3468:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
This is because the eval_num_arg returns everything as an 'unsigned long long',
so it converts a void pointer to a wider integer, fix it by converting the void
pointer to an integer of the same size, 'unsigned long', before casting it to
'unsigned long long'.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-yllx4aqcg06v5n4vjpwiiuld@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa reported that the scsi_dispatch_cmd_done event failed to parse
with:
Error: expected type 5 but read 4
Error: expected type 5 but read 4
The problem is with this part of the print_fmt:
__print_symbolic(((REC->result) >> 24) & 0xff, ...
The __print_symbolic() helper function's first parameter is the field to
use to determine what symbol to print based on the value of the result.
The parser can handle one operation, but it can not handle multiple
operations ('>>' and '&').
Add code to process all operations for the field argument for
__print_symbolic() as well as __print_flags().
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131118142314.27ca334b@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After processing all group descriptors or encountering an error, it
frees all descriptors. However, current logic can leak memory since it
might not traverse all descriptors.
Note that the 'i' can have different value than nr_groups when an error
occurred and it's safe to call free(desc[i].name) for every desc since
we already make it NULL when it's reused for group names.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384741244-7271-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When processing event group descriptor in perf file header, we reuse an
allocated group name but forgot to prevent it from freeing.
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384741244-7271-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The problem is that when a thread overrides its default ":%pid" comm, we
forget to tag the thread comm as overriden. Hence, this overriden comm
is not inherited on future forks. Fix it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131116010207.GA18855@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Ingo Molnar:
"Tooling changes only: it includes the ARM tooling fixlets, various
other fixes, smaller updates, minor cleanups"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf record: Add an option to force per-cpu mmaps
perf probe: Add '--demangle'/'--no-demangle'
perf ui browser: Fix segfault caused by off by one handling END key
perf symbols: Limit max callchain using max_stack on DWARF unwinding too
perf evsel: Introduce perf_evsel__prev() method
perf tools: Use perf_evlist__{first,last}, perf_evsel__next
perf tools: Synthesize anon MMAP records again
perf top: Add missing newline if the 'uid' is invalid
perf tools: Remove trivial extra semincolon
perf trace: Tweak summary output
tools/perf/build: Fix feature-libunwind-debug-frame handling
tools/perf/build: Fix timerfd feature check
some robustness fixes for broken virtio devices, plus minor tweaks.
[vs last pull request: added the virtio-scsi broken vq escape patch, which
I somehow lost.]
Cheers,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=vY2L
-----END PGP SIGNATURE-----
Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull virtio updates from Rusty Russell:
"Nothing really exciting: some groundwork for changing virtio endian,
and some robustness fixes for broken virtio devices, plus minor
tweaks"
* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
virtio_scsi: verify if queue is broken after virtqueue_get_buf()
x86, asmlinkage, lguest: Pass in globals into assembler statement
virtio: mmio: fix signature checking for BE guests
virtio_ring: adapt to notify() returning bool
virtio_net: verify if queue is broken after virtqueue_get_buf()
virtio_console: verify if queue is broken after virtqueue_get_buf()
virtio_blk: verify if queue is broken after virtqueue_get_buf()
virtio_ring: add new function virtqueue_is_broken()
virtio_test: verify if virtqueue_kick() succeeded
virtio_net: verify if virtqueue_kick() succeeded
virtio_ring: let virtqueue_{kick()/notify()} return a bool
virtio_ring: change host notification API
virtio_config: remove virtio_config_val
virtio: use size-based config accessors.
virtio_config: introduce size-based accessors.
virtio_ring: plug kmemleak false positive.
virtio: pm: use CONFIG_PM_SLEEP instead of CONFIG_PM
By default, when tasks are specified (i.e. -p, -t or -u options)
per-thread mmaps are created.
Add an option to override that and force per-cpu mmaps.
Further comments by peterz:
So this option allows -t/-p/-u to create one buffer per cpu and attach
all the various thread/process/user tasks' their counters to that one
buffer?
As opposed to the current state where each such counter would have its
own buffer.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1383313899-15987-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
You can't pass demangled name into "perf probe", because of special chars:
./perf probe -f -x /tmp/a.out 'foo(int)'
Semantic error :There is non-digit char in line number.
And you can't even pass without demangling (because it search symbol in
DSO with demangle=true):
./perf probe -f -x /tmp/a.out _Z3fooi
no symbols found in /tmp/a.out, maybe install a debug package?
However:
nm /tmp/a.out | grep foo
000000000040056d T _Z3fooi
After this patch, using the next command:
./perf probe -f --no-demangle -x /tmp/a.out _Z3fooi
probe will be successfully added.
Signed-off-by: Azat Khuzhin <a3at.mail@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1382947464-31266-1-git-send-email-a3at.mail@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
$ perf record ls
$ perf report
Press 'down enter end'
Result:
Program received signal SIGSEGV, Segmentation fault.
The UI browser, used on a argv array would access past the end of the
array on SEEK_END because it wasn't using 'nr_entries - 1', fix it.
Reported-by: v.karpov@samsung.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=59291
Link: http://lkml.kernel.org/n/tip-3g83ipasqi219ktv764xzzjs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was affecting only frame-pointer (fp) based callchain processing.
Usage example:
perf top --call-graph dwarf,1024 --max-stack 2
Works for any tool that does callchain resolving and provides a
--max-stack option.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Link: http://lkml.kernel.org/n/tip-eu45v8s3tq9ruay8tpfyon79@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just one use so far, on the hists browser, for completeness since there
we use perf_evlist__{first,last} and perf_evsel__next() for handling the
TAB and UNTAB keys.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-d09l4lejp5427enuf3igpckw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In a few remaining places where the equivalent open coded variant was
still being used.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4vjnloi5fisilykwxalb5nel@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When introducing the PERF_RECORD_MMAP2 in:
5c5e854bc7 perf tools: Add attr->mmap2 support
A check for the number of entries parsed by sscanf was introduced that
assumed all of the 8 fields needed to be correctly parsed so that
particular /proc/pid/maps line would be considered synthesizable.
That broke anon records synthesizing, as it doesn't have the 'execname'
field.
Fix it by keeping the sscanf return check, changing it to not require
that the 'execname' variable be parsed, so that the preexisting logic
can kick in and set it to '//anon'.
This should get things like JIT profiling working again.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Bill Gray <bgray@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Richard Fowles <rfowles@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/n/tip-bo4akalno7579shpz29u867j@git.kernel.org
[ commit log message is mine, dzickus reported the problem with a patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add missing newline if the 'uid' is invalid:
hubble:~> perf top --stdio -u help
Error:
Invalid User: helphubble:~>
Fixed by this patch:
comet:~/tip/tools/perf> perf top --stdio -u help
Error:
Invalid User: help
comet:~/tip/tools/perf>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131112232609.GA31474@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Set feature-libunwind-debug-frame. We don't want it in
CORE_FEATURE_TESTS because it's not the generic case, but we
need to set it in the !feature-libunwind case.
Also, because x86 distributions typically don't have
dwarf_find_debug_frame() unwinding method:
test-libunwind-debug-frame.c:(.text+0x31): undefined reference to `_Ux86_64_dwarf_find_debug_frame'
Restrict this new API to ARM for the time being.
With this patch test-all.c works again, so repeat perf builds
are fast again:
comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
[...]
0,452899660 seconds time elapsed ( +- 0,11% )
While with before it was:
comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
[...]
1,674001829 seconds time elapsed ( +- 0,16% )
[ Includes fix to config/feature-checks/Makefile from Will Deacon. ]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Jean Pihet <jean.pihet@linaro.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-scsoctqzmou3rpkixCHezy9e@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
'feature_timerfd' is checked all the time and calculated explicitly,
in a serial fashion. Add it to CORE_FEATURE_TESTS which causes it to
be built in parallel, using the newfangled parallel build autodetection
code.
This shaves 137 msecs off the perf build time on my system, which
speeds up the common case cached build by 43%:
Before:
comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
[...]
0,453771441 seconds time elapsed ( +- 0,09% )
After:
comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
[...]
0,316290185 seconds time elapsed ( +- 0,24% )
Cc: David Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-bb92CmexihopoSyqnkqepvsy@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull perf updates from Ingo Molnar:
"A number of fixes:
- Fix segfault on perf trace -i perf.data, from Namhyung Kim.
- Fix segfault with --no-mmap-pages, from David Ahern.
- Don't force a refresh during progress update in the TUI, greatly
reducing startup costs, fix from Patrick Palka.
- Fix sw clock event period test wrt not checking if using >
max_sample_freq.
- Handle throttle events in 'object code reading' test, fix from
Adrian Hunter.
- Prevent condition that all sort keys are elided, fix from Namhyung
Kim.
- Round mmap pages to power 2, from David Ahern.
And a number of late arrival changes:
- Add summary only option to 'perf trace', suppressing the decoding
of events, from David Ahern
- 'perf trace --summary' formatting simplifications, from Pekka
Enberg.
- Beautify fifth argument of mmap() as fd, in 'perf trace', from
Namhyung Kim.
- Add direct access to dynamic arrays in libtraceevent, from Steven
Rostedt.
- Synthesize non-exec MMAP records when --data used, allowing the
resolution of data addresses to symbols (global variables, etc), by
Arnaldo Carvalho de Melo.
- Code cleanups by David Ahern and Adrian Hunter"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
tools lib traceevent: Add direct access to dynamic arrays
perf target: Shorten perf_target__ to target__
perf tests: Handle throttle events in 'object code reading' test
perf evlist: Refactor mmap_pages parsing
perf evlist: Round mmap pages to power 2 - v2
perf record: Fix segfault with --no-mmap-pages
perf trace: Add summary only option
perf trace: Simplify '--summary' output
perf trace: Change syscall summary duration order
perf tests: Compensate lower sample freq with longer test loop
perf trace: Fix segfault on perf trace -i perf.data
perf trace: Separate tp syscall field caching into init routine to be reused
perf trace: Beautify fifth argument of mmap() as fd
perf tests: Use lower sample_freq in sw clock event period test
perf tests: Check return of perf_evlist__open sw clock event period test
perf record: Move existing write_output into helper function
perf record: Use correct return type for write()
perf tools: Prevent condition that all sort keys are elided
perf machine: Simplify synthesize_threads method
perf machine: Introduce synthesize_threads method out of open coded equivalent
...
Pull thermal management updates from Zhang Rui:
"This time we only have a few changes as there are no soc thermal
changes from Eduardo. The only big change is the introduction of
TMON, a tool to help visualize, tune, and test the thermal subsystem.
The rest is mostly cleanups and fixes all over.
Specifics:
- introduce TMON, a tool base on thermal sysfs I/F. It can be used
to visualize, tune and test the thermal subsystem.
- fix a zone/cooling device binding problem, when both thermal zone
bind parameters and .bind() callback are available"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
tools/thermal: Introduce tmon, a tool for thermal subsystem
thermal: Fix binding problem when there is thermal zone params
thermal: cpu_cooling: fix return value check in cpufreq_cooling_register()
Thermal: Check for validity before doing kfree
thermal/intel_powerclamp: Add newer CPU models
Thermal: Tidy up error handling in powerclamp_init
thermal: Kconfig: cosmetic fixes
ACPI/thermal : Remove zone disabled warning
typo in drivers/thermal/Kconfig: lpatform instead of platform
Pull ARM updates from Russell King:
"Included in this series are:
1. BE8 (modern big endian) changes for ARM from Ben Dooks
2. big.Little support from Nicolas Pitre and Dave Martin
3. support for LPAE systems with all system memory above 4GB
4. Perf updates from Will Deacon
5. Additional prefetching and other performance improvements from Will.
6. Neon-optimised AES implementation fro Ard.
7. A number of smaller fixes scattered around the place.
There is a rather horrid merge conflict in tools/perf - I was never
notified of the conflict because it originally occurred between Will's
tree and other stuff. Consequently I have a resolution which Will
forwarded me, which I'll forward on immediately after sending this
mail.
The other notable thing is I'm expecting some build breakage in the
crypto stuff on ARM only with Ard's AES patches. These were merged
into a stable git branch which others had already pulled, so there's
little I can do about this. The problem is caused because these
patches have a dependency on some code in the crypto git tree - I
tried requesting a branch I can pull to resolve these, and all I got
each time from the crypto people was "we'll revert our patches then"
which would only make things worse since I still don't have the
dependent patches. I've no idea what's going on there or how to
resolve that, and since I can't split these patches from the rest of
this pull request, I'm rather stuck with pushing this as-is or
reverting Ard's patches.
Since it should "come out in the wash" I've left them in - the only
build problems they seem to cause at the moment are with randconfigs,
and since it's a new feature anyway. However, if by -rc1 the
dependencies aren't in, I think it'd be best to revert Ard's patches"
I resolved the perf conflict roughly as per the patch sent by Russell,
but there may be some differences. Any errors are likely mine. Let's
see how the crypto issues work out..
* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits)
ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h"
ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg().
ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h
ARM: 7871/1: amba: Extend number of IRQS
ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise()
ARM: 7872/1: Support arch_irq_work_raise() via self IPIs
ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode
ARM: 7878/1: nommu: Implement dummy early_paging_init()
ARM: 7876/1: clear Thumb-2 IT state on exception handling
ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}()
ARM: footbridge: fix build warnings for netwinder
ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu
ARM: fix misplaced arch_virt_to_idmap()
ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown
ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation
ARM: 7869/1: remove unused XSCALE_PMU Kconfig param
ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t
ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments
ARM: 7862/1: pcpu: replace __get_cpu_var_uses
ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code
...
Soft dirty bit allows us to track which pages are written since the last
clear_ref (by "echo 4 > /proc/pid/clear_refs".) This is useful for
userspace applications to know their memory footprints.
Note that the kernel exposes this flag via bit[55] of /proc/pid/pagemap,
and the semantics is not a default one (scheduled to be the default in the
near future.) However, it shifts to the new semantics at the first
clear_ref, and the users of soft dirty bit always do it before utilizing
the bit, so that's not a big deal. Users must avoid relying on the bit in
page-types before the first clear_ref.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Support the next generation Intel Atom processor
mirco-architecture, formerly called Silvermont.
The server version, formerly called "Avoton",
is named the "Intel(R) Atom(TM) Processor C2000 Product Family".
The client version, formerly called "Bay Trail",
is named the "Intel Atom Processor Z3000 Series",
as well as various "Intel Pentium Processor"
and "Intel Celeron Processor" brands, depending
on form-factor.
Silvermont has a set of MSRs not far off from NHM,
but the RAPL register set is a sub-set of those previously supported.
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
. Add summary only option to 'perf trace', suppressing the decoding of
events, from David Ahern
. 'perf trace --summary' formatting simplifications, from Pekka Emberg.
. Beautify fifth argument of mmap() as fd, in 'perf trace', from Namhyung Kim.
. Fix segfault on perf trace -i perf.data, from Namhyung Kim.
. Fix segfault with --no-mmap-pages, from David Ahern.
. Round mmap pages to power 2, from David Ahern.
. Add direct access to dynamic arrays in libtraceevent, from Steven Rostedt.
. Handle throttle events in 'object code reading' test, fix from Adrian Hunter.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=HiWt
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
* Add summary only option to 'perf trace', suppressing the decoding of
events, from David Ahern
* 'perf trace --summary' formatting simplifications, from Pekka Emberg.
* Beautify fifth argument of mmap() as fd, in 'perf trace', from Namhyung Kim.
* Fix segfault on perf trace -i perf.data, from Namhyung Kim.
* Fix segfault with --no-mmap-pages, from David Ahern.
* Round mmap pages to power 2, from David Ahern.
* Add direct access to dynamic arrays in libtraceevent, from Steven Rostedt.
* Handle throttle events in 'object code reading' test, fix from Adrian Hunter.
* Prevent condition that all sort keys are elided, fix from Namhyung Kim.
* Synthesize non-exec MMAP records when --data used, allowing the resolution of
data addresses to symbols (global variables, etc).
* Don't force a refresh during progress update in the TUI, greatly reducing
startup costs, fix from Patrick Palka.
* Fix sw clock event period test wrt not checking if using > max_sample_freq.
* Code cleanups by David Ahern and Adrian Hunter.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiri Olsa was writing a plugin for the cfg80211_tx_mlme_mgmt trace
event, and was not able to get the implemented function working.
The event's print fmt looks like:
"netdev:%s(%d), ftype:0x%.2x", REC->name, REC->ifindex,
__le16_to_cpup((__le16 *)__get_dynamic_array(frame))
As there's no helper function for __le16_to_cpup(), Jiri was creating one
with a plugin. But unfortunately, it would not work even though he set
up the plugin correctly.
The problem is that the function parameters do not handle the helper
function "__get_dynamic_array()", and that passes in a NULL pointer.
Adding PRINT_DYNAMIC_ARRAY direct support to eval_num_arg() allows the
use of __get_dynamic_array() in function parameters.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131111160810.0ba9df7d@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Getting unwieldly long, for this app domain should be descriptive enough
and the use of __ to separate the class from the method names should
help with avoiding clashes with other code bases.
Reported-by: David Ahern <dsahern@gmail.com>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20131112113427.GA4053@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Unhandled events cause an error that fails the test, fix it.
Reported-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/5281DFE5.3000909@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Logic will be re-used for the out-pages argument for mmap based writes
in perf-record.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1384267617-3446-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently perf requires the -m / --mmap_pages option to be a power of 2.
To be more user friendly perf should automatically round this up to the
next power of 2.
Currently:
$ perf record -m 3 -a -- sleep 1
--mmap_pages/-m value must be a power of two.sleep: Terminated
With patch:
$ perf record -m 3 -a -- sleep 1
rounding mmap pages size to 16384 (4 pages)
...
v2: Add bytes units to rounding message per Ingo's request. Other
suggestions (e.g., prefixing INFO) should be addressed by wrapping
pr_info to catch all instances.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1384267617-3446-3-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian reported a segfault when using --no-out-pages:
$ tools/perf/perf record -vv --no-out-pages uname
Segmentation fault (core dumped)
The same occurs with --no-mmap-pages. Fix by checking that str is
non-NULL before parsing it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1384267617-3446-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Per request from Pekka make --summary a summary only option meaning do
not show the individual system calls. Add another option to see all
syscalls along with the summary. In addition use 's' and 'S' as
shortcuts for the options.
Requested-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Pekka Enberg <penberg@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/1384273875-3751-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch duration order to minimum, average, maximum for the '--summary'
command line option because it's more natural to read.
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: http://lkml.kernel.org/r/1384265410-12344-1-git-send-email-penberg@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Doesn't work for me:
./perf test -v 19
19: Test software clock events have valid period values :
--- start ---
mmap size 528384B
mmap size 528384B
All (0) samples have period value of 1!
---- end ----
Test software clock events have valid period values: FAILED!
Compensate the lower freq introduced in 67c1e4a53b with a longer loop,
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/5281D3B8.2030104@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When replaying a previous record session, it'll get a segfault since it
doesn't initialize raw_syscalls enter/exit tracepoint's evsel->priv for
caching the format fields.
So fix it by properly initializing sys_enter/exit evsels that comes from
reading the perf.data file header.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384237500-22991-2-git-send-email-namhyung@kernel.org
[ Split the syscall tp field caching part in the previous patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to set this in evsels coming out of a perf.data file header, not
just for new ones created for live sessions.
So separate the code that caches the syscall entry/exit tracepoint
format fields into a new function that will be used in the next
changeset.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20131112115700.GC4053@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The fifth argument of mmap syscall is fd and it often contains -1 as a
value for anon mappings. Without this patch it doesn't show the file
name as well as it shows -1 as 4294967295.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384237500-22991-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
not compiled for ages, and recent versions of gcc for it are broken.
Remove support for it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=V6n6
-----END PGP SIGNATURE-----
Merge tag 'h8300-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull h8300 platform removal from Guenter Roeck:
"The patch series has been in -next for more than one relase cycle. I
did get a number of Acks, and no objections.
H8/300 has been dead for several years, the kernel for it has not
compiled for ages, and recent versions of gcc for it are broken.
Remove support for it"
* tag 'h8300-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
CREDITS: Add Yoshinori Sato for h8300
fs/minix: Drop dependency on H8300
Drop remaining references to H8/300 architecture
Drop MAINTAINERS entry for H8/300
watchdog: Drop references to H8300 architecture
net/ethernet: Drop H8/300 Ethernet driver
net/ethernet: smsc9194: Drop conditional code for H8/300
ide: Drop H8/300 driver
Drop support for Renesas H8/300 (h8300) architecture
