Start untangling xfs_file_iomap_begin by splitting out the read-only
case into its own set of iomap_ops with a very simply iomap_begin
helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We have lots of places that want to calculate the final fsb for
a offset + count in bytes and check that the result fits into
s_maxbytes. Factor out a helper for that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace our local hacks to report the source block in the main iomap
with the proper scrmap reporting.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Rejuggle the return path to prepare for filling out a source iomap.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_reflink_allocate_cow consumes the source data fork imap, and
potentially returns the COW fork imap. Split the arguments in two
to clear up the calling conventions and to prepare for returning
a source iomap from ->iomap_begin.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that xfs_file_unshare is not completely dumb we can just call it
directly without iterating the extent and reflink btrees ourselves.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no reason not to punch out stale delalloc blocks for zeroing
operations, as they otherwise behave exactly like normal writes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
[commit message is verbose for discussion purposes - will trim it
down later. Some questions about implementation details at the end.]
Zorro Lang recently ran a new test to stress single inode extent
counts now that they are no longer limited by memory allocation.
The test was simply:
# xfs_io -f -c "falloc 0 40t" /mnt/scratch/big-file
# ~/src/xfstests-dev/punch-alternating /mnt/scratch/big-file
This test uncovered a problem where the hole punching operation
appeared to finish with no error, but apparently only created 268M
extents instead of the 10 billion it was supposed to.
Further, trying to punch out extents that should have been present
resulted in success, but no change in the extent count. It looked
like a silent failure.
While running the test and observing the behaviour in real time,
I observed the extent coutn growing at ~2M extents/minute, and saw
this after about an hour:
# xfs_io -f -c "stat" /mnt/scratch/big-file |grep next ; \
> sleep 60 ; \
> xfs_io -f -c "stat" /mnt/scratch/big-file |grep next
fsxattr.nextents = 127657993
fsxattr.nextents = 129683339
#
And a few minutes later this:
# xfs_io -f -c "stat" /mnt/scratch/big-file |grep next
fsxattr.nextents = 4177861124
#
Ah, what? Where did that 4 billion extra extents suddenly come from?
Stop the workload, unmount, mount:
# xfs_io -f -c "stat" /mnt/scratch/big-file |grep next
fsxattr.nextents = 166044375
#
And it's back at the expected number. i.e. the extent count is
correct on disk, but it's screwed up in memory. I loaded up the
extent list, and immediately:
# xfs_io -f -c "stat" /mnt/scratch/big-file |grep next
fsxattr.nextents = 4192576215
#
It's bad again. So, where does that number come from?
xfs_fill_fsxattr():
if (ip->i_df.if_flags & XFS_IFEXTENTS)
fa->fsx_nextents = xfs_iext_count(&ip->i_df);
else
fa->fsx_nextents = ip->i_d.di_nextents;
And that's the behaviour I just saw in a nutshell. The on disk count
is correct, but once the tree is loaded into memory, it goes whacky.
Clearly there's something wrong with xfs_iext_count():
inline xfs_extnum_t xfs_iext_count(struct xfs_ifork *ifp)
{
return ifp->if_bytes / sizeof(struct xfs_iext_rec);
}
Simple enough, but 134M extents is 2**27, and that's right about
where things went wrong. A struct xfs_iext_rec is 16 bytes in size,
which means 2**27 * 2**4 = 2**31 and we're right on target for an
integer overflow. And, sure enough:
struct xfs_ifork {
int if_bytes; /* bytes in if_u1 */
....
Once we get 2**27 extents in a file, we overflow if_bytes and the
in-core extent count goes wrong. And when we reach 2**28 extents,
if_bytes wraps back to zero and things really start to go wrong
there. This is where the silent failure comes from - only the first
2**28 extents can be looked up directly due to the overflow, all the
extents above this index wrap back to somewhere in the first 2**28
extents. Hence with a regular pattern, trying to punch a hole in the
range that didn't have holes mapped to a hole in the first 2**28
extents and so "succeeded" without changing anything. Hence "silent
failure"...
Fix this by converting if_bytes to a int64_t and converting all the
index variables and size calculations to use int64_t types to avoid
overflows in future. Signed integers are still used to enable easy
detection of extent count underflows. This enables scalability of
extent counts to the limits of the on-disk format - MAXEXTNUM
(2**31) extents.
Current testing is at over 500M extents and still going:
fsxattr.nextents = 517310478
Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
XLOG_STATE_DO_CALLBACK is only entered through XLOG_STATE_DONE_SYNC
and just used in a single debug check. Remove the flag and thus
simplify the calling conventions for xlog_state_do_callback and
xlog_state_iodone_process_iclog.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
ic_state really is a set of different states, even if the values are
encoded as non-conflicting bits and we sometimes use logical and
operations to check for them. Switch all comparisms to check for
exact values (and use switch statements in a few places to make it
more clear) and turn the values into an implicitly enumerated enum
type.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
XFSERRORDEBUG is never set and the code isn't all that useful, so remove
it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
All but one caller of xlog_state_release_iclog hold l_icloglock and need
to drop and reacquire it to call xlog_state_release_iclog. Switch the
xlog_state_release_iclog calling conventions to expect the lock to be
held, and open code the logic (using a shared helper) in the only
remaining caller that does not have the lock (and where not holding it
is a nice performance optimization). Also move the refactored code to
require the least amount of forward declarations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: minor whitespace cleanup]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
This will allow optimizing various locking cycles in the following
patches.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
ic_io_size is only used inside xlog_write_iclog, where we can just use
the count parameter intead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
xlog_write_iclog expects a bool for the second argument. While any
non-0 value happens to work fine this makes all calls consistent.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The near mode fallback algorithm consists of a left/right scan of
the bnobt. This algorithm has very poor breakdown characteristics
under worst case free space fragmentation conditions. If a suitable
extent is far enough from the locality hint, each allocation may
scan most or all of the bnobt before it completes. This causes
pathological behavior and extremely high allocation latencies.
While locality is important to near mode allocations, it is not so
important as to incur pathological allocation latency to provide the
asolute best available locality for every allocation. If the
allocation is large enough or far enough away, there is a point of
diminishing returns. As such, we can bound the overall operation by
including an iterative cntbt lookup in the broader search. The cntbt
lookup is optimized to immediately find the extent with best
locality for the given size on each iteration. Since the cntbt is
indexed by extent size, the lookup repeats with a variably
aggressive increasing search key size until it runs off the edge of
the tree.
This approach provides a natural balance between the two algorithms
for various situations. For example, the bnobt scan is able to
satisfy smaller allocations such as for inode chunks or btree blocks
more quickly where the cntbt search may have to search through a
large set of extent sizes when the search key starts off small
relative to the largest extent in the tree. On the other hand, the
cntbt search more deterministically covers the set of suitable
extents for larger data extent allocation requests that the bnobt
scan may have to search the entire tree to locate.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Lift the btree fixup path into a helper function.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In preparation to enhance the near mode allocation bnobt scan algorithm, lift
it into a separate function. No functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The bnobt "find best" helper implements a simple btree walker
function. This general pattern, or a subset thereof, is reused in
various parts of a near mode allocation operation. For example, the
bnobt left/right scans are each iterative btree walks along with the
cntbt lastblock scan.
Rework this function into a generic btree walker, add a couple
parameters to control termination behavior from various contexts and
reuse it where applicable.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Both algorithms duplicate the same btree allocation code. Eliminate
the duplication and reuse the fallback algorithm codepath.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The near mode bnobt scan searches left and right in the bnobt
looking for the closest free extent to the allocation hint that
satisfies minlen. Once such an extent is found, the left/right
search terminates, we search one more time in the opposite direction
and finish the allocation with the best overall extent.
The left/right and find best searches are currently controlled via a
combination of cursor state and local variables. Clean up this code
and prepare for further improvements to the near mode fallback
algorithm by reusing the allocation cursor best extent tracking
mechanism. Update the tracking logic to deactivate bnobt cursors
when out of allocation range and replace open-coded extent checks to
calls to the common helper. In doing so, rename some misnamed local
variables in the top-level near mode allocation function.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The cntbt lastblock scan checks the size, alignment, locality, etc.
of each free extent in the block and compares it with the current
best candidate. This logic will be reused by the upcoming optimized
cntbt algorithm, so refactor it into a separate helper. Note that
acur->diff is now initialized to -1 (unsigned) instead of 0 to
support the more granular comparison logic in the new helper.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
If the size lookup lands in the last block of the by-size btree, the
near mode algorithm scans the entire block for the extent with best
available locality. In preparation for similar best available
extent tracking across both btrees, extend the allocation cursor
with best extent data and lift the associated state from the cntbt
last block scan code. No functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Extend the allocation cursor to track extent busy state for an
allocation attempt. No functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Introduce a new allocation cursor data structure to encapsulate the
various states and structures used to perform an extent allocation.
This structure will eventually be used to track overall allocation
state across different search algorithms on both free space btrees.
To start, include the three btree cursors (one for the cntbt and two
for the bnobt left/right search) used by the near mode allocation
algorithm and refactor the cursor setup and teardown code into
helpers. This slightly changes cursor memory allocation patterns,
but otherwise makes no functional changes to the allocation
algorithm.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix sparse complaints]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The upcoming allocation algorithm update searches multiple
allocation btree cursors concurrently. As such, it requires an
active state to track when a particular cursor should continue
searching. While active state will be modified based on higher level
logic, we can define base functionality based on the result of
allocation btree lookups.
Define an active flag in the private area of the btree cursor.
Update it based on the result of lookups in the existing allocation
btree helpers. Finally, provide a new helper to query the current
state.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no point in applying extent size hints for always COW inodes,
as we would just have to COW any extra allocation beyond the data
actually written.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In commit d03a2f1b9f ("xfs: include WARN, REPAIR build options in
XFS_BUILD_OPTIONS"), Eric pointed out that the XFS_BUILD_OPTIONS string,
shown at module init time and in modinfo output, does not currently
include all available build options. So, he added in CONFIG_XFS_WARN and
CONFIG_XFS_REPAIR. However, this is not enough, add in CONFIG_XFS_QUOTA
and CONFIG_XFS_ASSERT_FATAL.
Signed-off-by: yu kuai <yukuai3@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The srcmap is used to identify where the read is to be performed from.
It is passed to ->iomap_begin, which can fill it in if we need to read
data for partially written blocks from a different location than the
write target. The srcmap is only supported for buffered writes so far.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
[hch: merged two patches, removed the IOMAP_F_COW flag, use iomap as
srcmap if not set, adjust length down to srcmap end as well]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
xfs_file_dirty is used to unshare reflink blocks. Rename the function
to xfs_file_unshare to better document that purpose, and skip iomaps
that are not shared and don't need zeroing. This will allow to simplify
the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Take the xfs writeback code and move it to fs/iomap. A new structure
with three methods is added as the abstraction from the generic writeback
code to the file system. These methods are used to map blocks, submit an
ioend, and cancel a page that encountered an error before it was added to
an ioend.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[darrick: rename ->submit_ioend to ->prepare_ioend to clarify what it
does]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Lift the xfs code for tracing address space operations to the iomap
layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In preparation for moving the writeback code to iomap.c, replace the
XFS-specific COW fork concept with the iomap IOMAP_F_SHARED flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In preparation for moving the ioend structure to common code we need
to get rid of the xfs-specific xfs_trans type. Just make it a file
system private void pointer instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Introduce two nicely abstracted helper, which can be moved to the iomap
code later. Also use list_first_entry_or_null to simplify the code a
bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In preparation for moving the XFS writeback code to fs/iomap.c, switch
it to use struct iomap instead of the XFS-specific struct xfs_bmbt_irec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Don't set IOMAP_F_NEW if we COW over an existing allocated range, as
these aren't strictly new allocations. This is required to be able to
use IOMAP_F_NEW to zero newly allocated blocks, which is required for
the iomap code to fully support file systems that don't do delayed
allocations or use unwritten extents.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Currently we don't overwrite the flags field in the iomap in
xfs_bmbt_to_iomap. This works fine with 0-initialized iomaps on stack,
but is harmful once we want to be able to reuse an iomap in the
writeback code. Replace the shared parameter with a set of initial
flags an thus ensures the flags field is always reinitialized.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When doing a direct IO that spans the current EOF, and there are
written blocks beyond EOF that extend beyond the current write, the
only metadata update that needs to be done is a file size extension.
However, we don't mark such iomaps as IOMAP_F_DIRTY to indicate that
there is IO completion metadata updates required, and hence we may
fail to correctly sync file size extensions made in IO completion
when O_DSYNC writes are being used and the hardware supports FUA.
Hence when setting IOMAP_F_DIRTY, we need to also take into account
whether the iomap spans the current EOF. If it does, then we need to
mark it dirty so that IO completion will call generic_write_sync()
to flush the inode size update to stable storage correctly.
Fixes: 3460cac1ca ("iomap: Use FUA for pure data O_DSYNC DIO writes")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: removed the ext4 part; they'll handle it separately]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
64-bit time is a signed quantity in the kernel, so the bulkstat
structure should reflect that. Note that the structure size stays
the same and that we have not yet published userspace headers for this
new ioctl so there are no users to break.
Fixes: 7035f9724f ("xfs: introduce new v5 bulkstat structure")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Use iomap_dio_rw() to wait for unaligned direct IO instead of opencoding
the wait.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Filesystems do not support doing IO as asynchronous in some cases. For
example in case of unaligned writes or in case file size needs to be
extended (e.g. for ext4). Instead of forcing filesystem to wait for AIO
in such cases, add argument to iomap_dio_rw() which makes the function
wait for IO completion. This also results in executing
iomap_dio_complete() inline in iomap_dio_rw() providing its return value
to the caller as for ordinary sync IO.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The callers of xfs_bmap_local_to_extents_empty() log the inode
external to the function, yet this function is where the on-disk
format value is updated. Push the inode logging down into the
function itself to help prevent future mistakes.
Note that internal bmap callers track the inode logging flags
independently and thus may log the inode core twice due to this
change. This is harmless, so leave this code around for consistency
with the other attr fork conversion functions.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_attr_shortform_to_leaf() attempts to put the shortform fork back
together after a failed attempt to convert from shortform to leaf
format. While this code reallocates and copies back the shortform
attr fork data, it never resets the inode format field back to local
format. Further, now that the inode is properly logged after the
initial switch from local format, any error that triggers the
recovery code will eventually abort the transaction and shutdown the
fs. Therefore, remove the broken and unnecessary error handling
code.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When a directory changes from shortform (sf) to block format, the sf
format is copied to a temporary buffer, the inode format is modified
and the updated format filled with the dentries from the temporary
buffer. If the inode format is modified and attempt to grow the
inode fails (due to I/O error, for example), it is possible to
return an error while leaving the directory in an inconsistent state
and with an otherwise clean transaction. This results in corruption
of the associated directory and leads to xfs_dabuf_map() errors as
subsequent lookups cannot accurately determine the format of the
directory. This problem is reproduced occasionally by generic/475.
The fundamental problem is that xfs_dir2_sf_to_block() changes the
on-disk inode format without logging the inode. The inode is
eventually logged by the bmapi layer in the common case, but error
checking introduces the possibility of failing the high level
request before this happens.
Update both of the dir2 and attr callers of
xfs_bmap_local_to_extents_empty() to log the inode core as
consistent with the bmap local to extent format change codepath.
This ensures that any subsequent errors after the format has changed
cause the transaction to abort.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Guarantee zeroed memory buffers for cases where potential memory
leak to disk can occur. In these cases, kmem_alloc is used and
doesn't zero the buffer, opening the possibility of information
leakage to disk.
Use existing infrastucture (xfs_buf_allocate_memory) to obtain
the already zeroed buffer from kernel memory.
This solution avoids the performance issue that would occur if a
wholesale change to replace kmem_alloc with kmem_zalloc was done.
Signed-off-by: Bill O'Donnell <billodo@redhat.com>
[darrick: fix bitwise complaint about kmflag_mask]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Removed unused error variable. Instead of using error variable,
returned the value directly as it wasn't updated.
Signed-off-by: Aliasgar Surti <aliasgar.surti500@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The flags arg is always passed as zero, so remove it.
(xfs_buf_get_uncached takes flags to support XBF_NO_IOACCT for
the sb, but that should never be relevant for xfs_get_aghdr_buf)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
To ensure that all blocks touched by the range [offset, offset + count)
are allocated, we need to calculate the block count from the difference
of the range end (rounded up) and the range start (rounded down).
Before this patch, we just round up the byte count, which may lead to
unaligned ranges not being fully allocated:
$ touch test_file
$ block_size=$(stat -fc '%S' test_file)
$ fallocate -o $((block_size / 2)) -l $block_size test_file
$ xfs_bmap test_file
test_file:
0: [0..7]: 1396264..1396271
1: [8..15]: hole
There should not be a hole there. Instead, the first two blocks should
be fully allocated.
With this patch applied, the result is something like this:
$ touch test_file
$ block_size=$(stat -fc '%S' test_file)
$ fallocate -o $((block_size / 2)) -l $block_size test_file
$ xfs_bmap test_file
test_file:
0: [0..15]: 11024..11039
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
- Minor code cleanups.
- Fix a superblock logging error.
- Ensure that collapse range converts the data fork to extents format
when necessary.
- Revert the ALLOC_USERDATA cleanup because it caused subtle
behavior regressions.
-----BEGIN PGP SIGNATURE-----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=D/XD
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.4-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"There are a couple of bug fixes and some small code cleanups that came
in recently:
- Minor code cleanups
- Fix a superblock logging error
- Ensure that collapse range converts the data fork to extents format
when necessary
- Revert the ALLOC_USERDATA cleanup because it caused subtle behavior
regressions"
* tag 'xfs-5.4-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: avoid unused to_mp() function warning
xfs: log proper length of superblock
xfs: revert 1baa2800e6 ("xfs: remove the unused XFS_ALLOC_USERDATA flag")
xfs: removed unneeded variable
xfs: convert inode to extent format after extent merge due to shift
Merge more updates from Andrew Morton:
- almost all of the rest of -mm
- various other subsystems
Subsystems affected by this patch series:
memcg, misc, core-kernel, lib, checkpatch, reiserfs, fat, fork,
cpumask, kexec, uaccess, kconfig, kgdb, bug, ipc, lzo, kasan, madvise,
cleanups, pagemap
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (77 commits)
arch/sparc/include/asm/pgtable_64.h: fix build
mm: treewide: clarify pgtable_page_{ctor,dtor}() naming
ntfs: remove (un)?likely() from IS_ERR() conditions
IB/hfi1: remove unlikely() from IS_ERR*() condition
xfs: remove unlikely() from WARN_ON() condition
wimax/i2400m: remove unlikely() from WARN*() condition
fs: remove unlikely() from WARN_ON() condition
xen/events: remove unlikely() from WARN() condition
checkpatch: check for nested (un)?likely() calls
hexagon: drop empty and unused free_initrd_mem
mm: factor out common parts between MADV_COLD and MADV_PAGEOUT
mm: introduce MADV_PAGEOUT
mm: change PAGEREF_RECLAIM_CLEAN with PAGE_REFRECLAIM
mm: introduce MADV_COLD
mm: untag user pointers in mmap/munmap/mremap/brk
vfio/type1: untag user pointers in vaddr_get_pfn
tee/shm: untag user pointers in tee_shm_register
media/v4l2-core: untag user pointers in videobuf_dma_contig_user_get
drm/radeon: untag user pointers in radeon_gem_userptr_ioctl
drm/amdgpu: untag user pointers
...
- Report both io errors and short io results to the directio endio
handler.
- Allow directio callers to pass an ops structure to iomap_dio_rw.
-----BEGIN PGP SIGNATURE-----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=zkFp
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.4-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"After last week's failed pull request attempt, I scuttled everything
in the branch except for the directio endio api changes, which were
trivial. Everything else will simply have to wait for the next cycle.
Summary:
- Report both io errors and short io results to the directio endio
handler.
- Allow directio callers to pass an ops structure to iomap_dio_rw"
* tag 'iomap-5.4-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: move the iomap_dio_rw ->end_io callback into a structure
iomap: split size and error for iomap_dio_rw ->end_io
to_mp() was first introduced with the following commit:
'commit 801cc4e17a ("xfs: debug mode forced buffered write failure")'
But the user of to_mp() was removed by below commit:
'commit f8c47250ba ("xfs: convert drop_writes to use the errortag
mechanism")'
So kernel build with clang throws below warning message:
fs/xfs/xfs_sysfs.c:72:1: warning: unused function 'to_mp' [-Wunused-function]
to_mp(struct kobject *kobject)
Hence to_mp() might be removed safely to get rid of warning message.
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_trans_log_buf takes first byte, last byte as args. In this
case, it should be from 0 to sizeof() - 1.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Returned value directly instead of using variable as it wasn't updated.
Signed-off-by: Aliasgar Surti <aliasgar.surti500@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The collapse range operation can merge extents if two newly adjacent
extents are physically contiguous. If the extent count is reduced on
a btree format inode, a change to extent format might be necessary.
This format change currently occurs as a side effect of the file
size update after extents have been shifted for the collapse. This
codepath ultimately calls xfs_bunmapi(), which happens to check for
and execute the format conversion even if there were no blocks
removed from the mapping.
While this ultimately puts the inode into the correct state, the
fact the format conversion occurs in a separate transaction from the
change that called for it is a problem. If an extent shift
transaction commits and the filesystem happens to crash before the
format conversion, the inode fork is left in a corrupted state after
log recovery. The inode fork verifier fails and xfs_repair
ultimately nukes the inode. This problem was originally reproduced
by generic/388.
Similar to how the insert range extent split code handles extent to
btree conversion, update the collapse range extent merge code to
handle btree to extent format conversion in the same transaction
that merges the extents. This ensures that the inode fork format
remains consistent if the filesystem happens to crash in the middle
of a collapse range operation that changes the inode fork format.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Add a new iomap_dio_ops structure that for now just contains the end_io
handler. This avoid storing the function pointer in a mutable structure,
which is a possible exploit vector for kernel code execution, and prepares
for adding a submit_io handler that btrfs needs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Modify the calling convention for the iomap_dio_rw ->end_io() callback.
Rather than passing either dio->error or dio->size as the 'size' argument,
instead pass both the dio->error and the dio->size value separately.
In the instance that an error occurred during a write, we currently cannot
determine whether any blocks have been allocated beyond the current EOF and
data has subsequently been written to these blocks within the ->end_io()
callback. As a result, we cannot judge whether we should take the truncate
failed write path. Having both dio->error and dio->size will allow us to
perform such checks within this callback.
Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org>
[hch: minor cleanups]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
This series from Deepa Dinamani adds a per-superblock minimum/maximum
timestamp limit for a file system, and clamps timestamps as they are
written, to avoid random behavior from integer overflow as well as having
different time stamps on disk vs in memory.
At mount time, a warning is now printed for any file system that can
represent current timestamps but not future timestamps more than 30
years into the future, similar to the arbitrary 30 year limit that was
added to settimeofday().
This was picked as a compromise to warn users to migrate to other file
systems (e.g. ext4 instead of ext3) when they need the file system to
survive beyond 2038 (or similar limits in other file systems), but not
get in the way of normal usage.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=em9y
-----END PGP SIGNATURE-----
Merge tag 'y2038-vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground
Pull y2038 vfs updates from Arnd Bergmann:
"Add inode timestamp clamping.
This series from Deepa Dinamani adds a per-superblock minimum/maximum
timestamp limit for a file system, and clamps timestamps as they are
written, to avoid random behavior from integer overflow as well as
having different time stamps on disk vs in memory.
At mount time, a warning is now printed for any file system that can
represent current timestamps but not future timestamps more than 30
years into the future, similar to the arbitrary 30 year limit that was
added to settimeofday().
This was picked as a compromise to warn users to migrate to other file
systems (e.g. ext4 instead of ext3) when they need the file system to
survive beyond 2038 (or similar limits in other file systems), but not
get in the way of normal usage"
* tag 'y2038-vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
ext4: Reduce ext4 timestamp warnings
isofs: Initialize filesystem timestamp ranges
pstore: fs superblock limits
fs: omfs: Initialize filesystem timestamp ranges
fs: hpfs: Initialize filesystem timestamp ranges
fs: ceph: Initialize filesystem timestamp ranges
fs: sysv: Initialize filesystem timestamp ranges
fs: affs: Initialize filesystem timestamp ranges
fs: fat: Initialize filesystem timestamp ranges
fs: cifs: Initialize filesystem timestamp ranges
fs: nfs: Initialize filesystem timestamp ranges
ext4: Initialize timestamps limits
9p: Fill min and max timestamps in sb
fs: Fill in max and min timestamps in superblock
utimes: Clamp the timestamps before update
mount: Add mount warning for impending timestamp expiry
timestamp_truncate: Replace users of timespec64_trunc
vfs: Add timestamp_truncate() api
vfs: Add file timestamp range support
- Remove KM_SLEEP/KM_NOSLEEP.
- Ensure that memory buffers for IO are properly sector-aligned to avoid
problems that the block layer doesn't check.
- Make the bmap scrubber more efficient in its record checking.
- Don't crash xfs_db when superblock inode geometry is corrupt.
- Fix btree key helper functions.
- Remove unneeded error returns for things that can't fail.
- Fix buffer logging bugs in repair.
- Clean up iterator return values.
- Speed up directory entry creation.
- Enable allocation of xattr value memory buffer during lookup.
- Fix readahead racing with truncate/punch hole.
- Other minor cleanups.
- Fix one AGI/AGF deadlock with RENAME_WHITEOUT.
- More BUG -> WARN whackamole.
- Fix various problems with the log failing to advance under certain
circumstances, which results in stalls during mount.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAl1yhwsACgkQ+H93GTRK
tOtTig//fYLgFVz3l6ffCb8WkJkmi7iWOJp3eLzK55+3W0++ThNsMlRTOWH7xCpZ
f+3LEvvm1ILBgf4XVlwUGt2HlLmNZeKYmiOl/jZxCH25KdfILRIyeyacAYf9vIWf
NQr5HOutsa1IfEDCiDwEnxuuVbgC+rN8j7Rlp/PpweXwRYjssqRWnGRgaZchLbyr
JZ40D9J1HLooY/yftKrgnxtfL4rmAhPoGdX3DnZmobHYRpFHrY31Ks24w6ogShDu
usczNeShXWlg31B4fVHo/rrVQ0xG77U+w/DTNvrAj0uvAlzvWVVibpaZjZtbhadO
NM0zOG41BY/ExBAHhpg0ieVdYI7wNEftF9gjyT7cXO9soD1mRgH6UKQMCm+o1frF
brtcpgQS2aEyGZaXGBIS23ziT/+LLGcav7LUeo7Rf6yiVoEA+FlsGaymC7l+FGCQ
lcgHdeRkeukdj+GJlmpiedb+Xya2g464CXswW7JtCghdNsypRsI4OdQQ2r8Du+w0
PUwfugv1cMAz99xfSZtSoTa7pimFxb6tHRcoqZVfQCefbKQ0VMJDU/AY7gQ2U3UM
PiFKXgPFo0p4tUvA/9ECTPcMDhMKMv200CGCJKXrokWwHtJ6jrAHb+EobjrfoiyX
+hkGEmzzt3vur7Zt2+YesCH3tZj1UfpsemOlorxYQk3hbsA9HEc=
=TZLp
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.4-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"For this cycle we have the usual pile of cleanups and bug fixes, some
performance improvements for online metadata scrubbing, massive
speedups in the directory entry creation code, some performance
improvement in the file ACL lookup code, a fix for a logging stall
during mount, and fixes for concurrency problems.
It has survived a couple of weeks of xfstests runs and merges cleanly.
Summary:
- Remove KM_SLEEP/KM_NOSLEEP.
- Ensure that memory buffers for IO are properly sector-aligned to
avoid problems that the block layer doesn't check.
- Make the bmap scrubber more efficient in its record checking.
- Don't crash xfs_db when superblock inode geometry is corrupt.
- Fix btree key helper functions.
- Remove unneeded error returns for things that can't fail.
- Fix buffer logging bugs in repair.
- Clean up iterator return values.
- Speed up directory entry creation.
- Enable allocation of xattr value memory buffer during lookup.
- Fix readahead racing with truncate/punch hole.
- Other minor cleanups.
- Fix one AGI/AGF deadlock with RENAME_WHITEOUT.
- More BUG -> WARN whackamole.
- Fix various problems with the log failing to advance under certain
circumstances, which results in stalls during mount"
* tag 'xfs-5.4-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (45 commits)
xfs: push the grant head when the log head moves forward
xfs: push iclog state cleaning into xlog_state_clean_log
xfs: factor iclog state processing out of xlog_state_do_callback()
xfs: factor callbacks out of xlog_state_do_callback()
xfs: factor debug code out of xlog_state_do_callback()
xfs: prevent CIL push holdoff in log recovery
xfs: fix missed wakeup on l_flush_wait
xfs: push the AIL in xlog_grant_head_wake
xfs: Use WARN_ON_ONCE for bailout mount-operation
xfs: Fix deadlock between AGI and AGF with RENAME_WHITEOUT
xfs: define a flags field for the AG geometry ioctl structure
xfs: add a xfs_valid_startblock helper
xfs: remove the unused XFS_ALLOC_USERDATA flag
xfs: cleanup xfs_fsb_to_db
xfs: fix the dax supported check in xfs_ioctl_setattr_dax_invalidate
xfs: Fix stale data exposure when readahead races with hole punch
fs: Export generic_fadvise()
mm: Handle MADV_WILLNEED through vfs_fadvise()
xfs: allocate xattr buffer on demand
xfs: consolidate attribute value copying
...
Pull vfs namei updates from Al Viro:
"Pathwalk-related stuff"
[ Audit-related cleanups, misc simplifications, and easier to follow
nd->root refcounts - Linus ]
* 'work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
devpts_pty_kill(): don't bother with d_delete()
infiniband: don't bother with d_delete()
hypfs: don't bother with d_delete()
fs/namei.c: keep track of nd->root refcount status
fs/namei.c: new helper - legitimize_root()
kill the last users of user_{path,lpath,path_dir}()
namei.h: get the comments on LOOKUP_... in sync with reality
kill LOOKUP_NO_EVAL, don't bother including namei.h from audit.h
audit_inode(): switch to passing AUDIT_INODE_...
filename_mountpoint(): make LOOKUP_NO_EVAL unconditional there
filename_lookup(): audit_inode() argument is always 0
When the log fills up, we can get into the state where the
outstanding items in the CIL being committed and aggregated are
larger than the range that the reservation grant head tail pushing
will attempt to clean. This can result in the tail pushing range
being trimmed back to the the log head (l_last_sync_lsn) and so
may not actually move the push target at all.
When the iclogs associated with the CIL commit finally land, the
log head moves forward, and this removes the restriction on the AIL
push target. However, if we already have transactions sleeping on
the grant head, and there's nothing in the AIL still to flush from
the current push target, then nothing will move the tail of the log
and trigger a log reservation wakeup.
Hence the there is nothing that will trigger xlog_grant_push_ail()
to recalculate the AIL push target and start pushing on the AIL
again to write back the metadata objects that pin the tail of the
log and hence free up space and allow the transaction reservations
to be woken and make progress.
Hence we need to push on the grant head when we move the log head
forward, as this may be the only trigger we have that can move the
AIL push target forwards in this situation.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xlog_state_clean_log() is only called from one place, and it occurs
when an iclog is transitioning back to ACTIVE. Prior to calling
xlog_state_clean_log, the iclog we are processing has a hard coded
state check to DIRTY so that xlog_state_clean_log() processes it
correctly. We also have a hard coded wakeup after
xlog_state_clean_log() to enfore log force waiters on that iclog
are woken correctly.
Both of these things are operations required to finish processing an
iclog and return it to the ACTIVE state again, so they make little
sense to be separated from the rest of the clean state transition
code.
Hence push these things inside xlog_state_clean_log(), document the
behaviour and rename it xlog_state_clean_iclog() to indicate that
it's being driven by an iclog state change and does the iclog state
change work itself.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The iclog IO completion state processing is somewhat complex, and
because it's inside two nested loops it is highly indented and very
hard to read. Factor it out, flatten the logic flow and clean up the
comments so that it much easier to see what the code is doing both
in processing the individual iclogs and in the over
xlog_state_do_callback() operation.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Simplify the code flow by lifting the iclog callback work out of
the main iclog iteration loop. This isolates the log juggling and
callbacks from the iclog state change logic in the loop.
Note that the loopdidcallbacks variable is not actually tracking
whether callbacks are actually run - it is tracking whether the
icloglock was dropped during the loop and so determines if we
completed the entire iclog scan loop atomically. Hence we know for
certain there are either no more ordered completions to run or
that the next completion will run the remaining ordered iclog
completions. Hence rename that variable appropriately for it's
function.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Start making this function readable by lifting the debug code into
a conditional function.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
generic/530 on a machine with enough ram and a non-preemptible
kernel can run the AGI processing phase of log recovery enitrely out
of cache. This means it never blocks on locks, never waits for IO
and runs entirely through the unlinked lists until it either
completes or blocks and hangs because it has run out of log space.
It runs out of log space because the background CIL push is
scheduled but never runs. queue_work() queues the CIL work on the
current CPU that is busy, and the workqueue code will not run it on
any other CPU. Hence if the unlinked list processing never yields
the CPU voluntarily, the push work is delayed indefinitely. This
results in the CIL aggregating changes until all the log space is
consumed.
When the log recoveyr processing evenutally blocks, the CIL flushes
but because the last iclog isn't submitted for IO because it isn't
full, the CIL flush never completes and nothing ever moves the log
head forwards, or indeed inserts anything into the tail of the log,
and hence nothing is able to get the log moving again and recovery
hangs.
There are several problems here, but the two obvious ones from
the trace are that:
a) log recovery does not yield the CPU for over 4 seconds,
b) binding CIL pushes to a single CPU is a really bad idea.
This patch addresses just these two aspects of the problem, and are
suitable for backporting to work around any issues in older kernels.
The more fundamental problem of preventing the CIL from consuming
more than 50% of the log without committing will take more invasive
and complex work, so will be done as followup work.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The code in xlog_wait uses the spinlock to make adding the task to
the wait queue, and setting the task state to UNINTERRUPTIBLE atomic
with respect to the waker.
Doing the wakeup after releasing the spinlock opens up the following
race condition:
Task 1 task 2
add task to wait queue
wake up task
set task state to UNINTERRUPTIBLE
This issue was found through code inspection as a result of kworkers
being observed stuck in UNINTERRUPTIBLE state with an empty
wait queue. It is rare and largely unreproducable.
Simply moving the spin_unlock to after the wake_up_all results
in the waker not being able to see a task on the waitqueue before
it has set its state to UNINTERRUPTIBLE.
This bug dates back to the conversion of this code to generic
waitqueue infrastructure from a counting semaphore back in 2008
which didn't place the wakeups consistently w.r.t. to the relevant
spin locks.
[dchinner: Also fix a similar issue in the shutdown path on
xc_commit_wait. Update commit log with more details of the issue.]
Fixes: d748c62367 ("[XFS] Convert l_flushsema to a sv_t")
Reported-by: Chris Mason <clm@fb.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In the situation where the log is full and the CIL has not recently
flushed, the AIL push threshold is throttled back to the where the
last write of the head of the log was completed. This is stored in
log->l_last_sync_lsn. Hence if the CIL holds > 25% of the log space
pinned by flushes and/or aggregation in progress, we can get the
situation where the head of the log lags a long way behind the
reservation grant head.
When this happens, the AIL push target is trimmed back from where
the reservation grant head wants to push the log tail to, back to
where the head of the log currently is. This means the push target
doesn't reach far enough into the log to actually move the tail
before the transaction reservation goes to sleep.
When the CIL push completes, it moves the log head forward such that
the AIL push target can now be moved, but that has no mechanism for
puhsing the log tail. Further, if the next tail movement of the log
is not large enough wake the waiter (i.e. still not enough space for
it to have a reservation granted), we don't wake anything up, and
hence we do not update the AIL push target to take into account the
head of the log moving and allowing the push target to be moved
forwards.
To avoid this particular condition, if we fail to wake the first
waiter on the grant head because we don't have enough space,
push on the AIL again. This will pick up any movement of the log
head and allow the push target to move forward due to completion of
CIL pushing.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
If the CONFIG_BUG is enabled, BUG is executed and then system is crashed.
However, the bailout for mount is no longer proceeding.
Using WARN_ON_ONCE rather than BUG can prevent this situation.
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When performing rename operation with RENAME_WHITEOUT flag, we will
hold AGF lock to allocate or free extents in manipulating the dirents
firstly, and then doing the xfs_iunlink_remove() call last to hold
AGI lock to modify the tmpfile info, so we the lock order AGI->AGF.
The big problem here is that we have an ordering constraint on AGF
and AGI locking - inode allocation locks the AGI, then can allocate
a new extent for new inodes, locking the AGF after the AGI. Hence
the ordering that is imposed by other parts of the code is AGI before
AGF. So we get an ABBA deadlock between the AGI and AGF here.
Process A:
Call trace:
? __schedule+0x2bd/0x620
schedule+0x33/0x90
schedule_timeout+0x17d/0x290
__down_common+0xef/0x125
? xfs_buf_find+0x215/0x6c0 [xfs]
down+0x3b/0x50
xfs_buf_lock+0x34/0xf0 [xfs]
xfs_buf_find+0x215/0x6c0 [xfs]
xfs_buf_get_map+0x37/0x230 [xfs]
xfs_buf_read_map+0x29/0x190 [xfs]
xfs_trans_read_buf_map+0x13d/0x520 [xfs]
xfs_read_agf+0xa6/0x180 [xfs]
? schedule_timeout+0x17d/0x290
xfs_alloc_read_agf+0x52/0x1f0 [xfs]
xfs_alloc_fix_freelist+0x432/0x590 [xfs]
? down+0x3b/0x50
? xfs_buf_lock+0x34/0xf0 [xfs]
? xfs_buf_find+0x215/0x6c0 [xfs]
xfs_alloc_vextent+0x301/0x6c0 [xfs]
xfs_ialloc_ag_alloc+0x182/0x700 [xfs]
? _xfs_trans_bjoin+0x72/0xf0 [xfs]
xfs_dialloc+0x116/0x290 [xfs]
xfs_ialloc+0x6d/0x5e0 [xfs]
? xfs_log_reserve+0x165/0x280 [xfs]
xfs_dir_ialloc+0x8c/0x240 [xfs]
xfs_create+0x35a/0x610 [xfs]
xfs_generic_create+0x1f1/0x2f0 [xfs]
...
Process B:
Call trace:
? __schedule+0x2bd/0x620
? xfs_bmapi_allocate+0x245/0x380 [xfs]
schedule+0x33/0x90
schedule_timeout+0x17d/0x290
? xfs_buf_find+0x1fd/0x6c0 [xfs]
__down_common+0xef/0x125
? xfs_buf_get_map+0x37/0x230 [xfs]
? xfs_buf_find+0x215/0x6c0 [xfs]
down+0x3b/0x50
xfs_buf_lock+0x34/0xf0 [xfs]
xfs_buf_find+0x215/0x6c0 [xfs]
xfs_buf_get_map+0x37/0x230 [xfs]
xfs_buf_read_map+0x29/0x190 [xfs]
xfs_trans_read_buf_map+0x13d/0x520 [xfs]
xfs_read_agi+0xa8/0x160 [xfs]
xfs_iunlink_remove+0x6f/0x2a0 [xfs]
? current_time+0x46/0x80
? xfs_trans_ichgtime+0x39/0xb0 [xfs]
xfs_rename+0x57a/0xae0 [xfs]
xfs_vn_rename+0xe4/0x150 [xfs]
...
In this patch we move the xfs_iunlink_remove() call to
before acquiring the AGF lock to preserve correct AGI/AGF locking
order.
Signed-off-by: kaixuxia <kaixuxia@tencent.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Define a flags field for the AG geometry ioctl structure.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add a helper that validates the startblock is valid. This checks for a
non-zero block on the main device, but skips that check for blocks on
the realtime device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This function isn't a macro anymore, so remove various superflous braces,
and explicit cast that is done implicitly due to the return value, use
a normal if statement instead of trying to squeeze everything together.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Setting the DAX flag on the directory of a file system that is not on a
DAX capable device makes as little sense as setting it on a regular file
on the same file system.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Hole puching currently evicts pages from page cache and then goes on to
remove blocks from the inode. This happens under both XFS_IOLOCK_EXCL
and XFS_MMAPLOCK_EXCL which provides appropriate serialization with
racing reads or page faults. However there is currently nothing that
prevents readahead triggered by fadvise() or madvise() from racing with
the hole punch and instantiating page cache page after hole punching has
evicted page cache in xfs_flush_unmap_range() but before it has removed
blocks from the inode. This page cache page will be mapping soon to be
freed block and that can lead to returning stale data to userspace or
even filesystem corruption.
Fix the problem by protecting handling of readahead requests by
XFS_IOLOCK_SHARED similarly as we protect reads.
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-fsdevel/CAOQ4uxjQNmxqmtA_VbYW0Su9rKRk2zobJmahcyeaEVOFKVQ5dw@mail.gmail.com/
Reported-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When doing file lookups and checking for permissions, we end up in
xfs_get_acl() to see if there are any ACLs on the inode. This
requires and xattr lookup, and to do that we have to supply a buffer
large enough to hold an maximum sized xattr.
On workloads were we are accessing a wide range of cache cold files
under memory pressure (e.g. NFS fileservers) we end up spending a
lot of time allocating the buffer. The buffer is 64k in length, so
is a contiguous multi-page allocation, and if that then fails we
fall back to vmalloc(). Hence the allocation here is /expensive/
when we are looking up hundreds of thousands of files a second.
Initial numbers from a bpf trace show average time in xfs_get_acl()
is ~32us, with ~19us of that in the memory allocation. Note these
are average times, so there are going to be affected by the worst
case allocations more than the common fast case...
To avoid this, we could just do a "null" lookup to see if the ACL
xattr exists and then only do the allocation if it exists. This,
however, optimises the path for the "no ACL present" case at the
expense of the "acl present" case. i.e. we can halve the time in
xfs_get_acl() for the no acl case (i.e down to ~10-15us), but that
then increases the ACL case by 30% (i.e. up to 40-45us).
To solve this and speed up both cases, drive the xattr buffer
allocation into the attribute code once we know what the actual
xattr length is. For the no-xattr case, we avoid the allocation
completely, speeding up that case. For the common ACL case, we'll
end up with a fast heap allocation (because it'll be smaller than a
page), and only for the rarer "we have a remote xattr" will we have
a multi-page allocation occur. Hence the common ACL case will be
much faster, too.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The same code is used to copy do the attribute copying in three
different places. Consolidate them into a single function in
preparation from on-demand buffer allocation.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Because we repeat exactly the same code to get the remote attribute
value after both calls to xfs_attr3_leaf_getvalue() if it's a remote
attr. Just do it in xfs_attr3_leaf_getvalue() so the callers don't
have to care about it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Shortform, leaf and remote value attr value retrieval return
different values for success. This makes it more complex to handle
actual errors xfs_attr_get() as some errors mean success and some
mean failure. Make the return values consistent for success and
failure consistent for all attribute formats.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When a directory is growing rapidly, new blocks tend to get added at
the end of the directory. These end up at the end of the freespace
index, and when the directory gets large finding these new
freespaces gets expensive. The code does a linear search across the
frespace index from the first block in the directory to the last,
hence meaning the newly added space is the last index searched.
Instead, do a reverse order index search, starting from the last
block and index in the freespace index. This makes most lookups for
free space on rapidly growing directories O(1) instead of O(N), but
should not have any impact on random insert workloads because the
average search length is the same regardless of which end of the
array we start at.
The result is a major improvement in large directory grow rates:
create time(sec) / rate (files/s)
File count vanilla Prev commit Patched
10k 0.41 / 24.3k 0.42 / 23.8k 0.41 / 24.3k
20k 0.74 / 27.0k 0.76 / 26.3k 0.75 / 26.7k
100k 3.81 / 26.4k 3.47 / 28.8k 3.27 / 30.6k
200k 8.58 / 23.3k 7.19 / 27.8k 6.71 / 29.8k
1M 85.69 / 11.7k 48.53 / 20.6k 37.67 / 26.5k
2M 280.31 / 7.1k 130.14 / 15.3k 79.55 / 25.2k
10M 3913.26 / 2.5k 552.89 / 18.1k
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When running a "create millions inodes in a directory" test
recently, I noticed we were spending a huge amount of time
converting freespace block headers from disk format to in-memory
format:
31.47% [kernel] [k] xfs_dir2_node_addname
17.86% [kernel] [k] xfs_dir3_free_hdr_from_disk
3.55% [kernel] [k] xfs_dir3_free_bests_p
We shouldn't be hitting the best free block scanning code so hard
when doing sequential directory creates, and it turns out there's
a highly suboptimal loop searching the the best free array in
the freespace block - it decodes the block header before checking
each entry inside a loop, instead of decoding the header once before
running the entry search loop.
This makes a massive difference to create rates. Profile now looks
like this:
13.15% [kernel] [k] xfs_dir2_node_addname
3.52% [kernel] [k] xfs_dir3_leaf_check_int
3.11% [kernel] [k] xfs_log_commit_cil
And the wall time/average file create rate differences are
just as stark:
create time(sec) / rate (files/s)
File count vanilla patched
10k 0.41 / 24.3k 0.42 / 23.8k
20k 0.74 / 27.0k 0.76 / 26.3k
100k 3.81 / 26.4k 3.47 / 28.8k
200k 8.58 / 23.3k 7.19 / 27.8k
1M 85.69 / 11.7k 48.53 / 20.6k
2M 280.31 / 7.1k 130.14 / 15.3k
The larger the directory, the bigger the performance improvement.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Simplify the logic in xfs_dir2_node_addname_int() by factoring out
the free block index lookup code that finds a block with enough free
space for the entry to be added. The code that is moved gets a major
cleanup at the same time, but there is no algorithm change here.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Factor out the code that adds a data block to a directory from
xfs_dir2_node_addname_int(). This makes the code flow cleaner and
more obvious and provides clear isolation of upcoming optimsations.
Signed-off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This gets rid of the need for a forward declaration of the static
function xfs_dir2_addname_int() and readies the code for factoring
of xfs_dir2_addname_int().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Iterator functions already use 0 to signal "continue iterating", so get
rid of the #defines and just do it directly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Use -ECANCELED to signal "stop iterating" instead of these magical
*_ITER_ABORT values, since it's duplicative.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
xfs_trans_log_buf() takes a final argument of the last byte to
log in the buffer; b_length is in basic blocks, so this isn't
the correct last byte. Fix it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In xfs_rmap_irec_offset_unpack, we should always clear the contents of
rm_flags before we begin unpacking the encoded (ondisk) offset into the
incore rm_offset and incore rm_flags fields. Remove the open-coded
field zeroing as this encourages api misuse.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Remove the return value from the functions that schedule deferred bmap
operations since they never fail and do not return status.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Remove the return value from the functions that schedule deferred
refcount operations since they never fail and do not return status.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Remove the return value from the functions that schedule deferred rmap
operations since they never fail and do not return status.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
This function doesn't use the @state parameter, so get rid of it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
In xfs_bmbt_diff_two_keys, we perform a signed int64_t subtraction with
two unsigned 64-bit quantities. If the second quantity is actually the
"maximum" key (all ones) as used in _query_all, the subtraction
effectively becomes addition of two positive numbers and the function
returns incorrect results. Fix this with explicit comparisons of the
unsigned values. Nobody needs this now, but the online repair patches
will need this to work properly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The xfs_rmap_has_other_keys helper aborts the iteration as soon as it
has an answer. Don't let this abort leak out to callers.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
In xfs_ialloc_setup_geometry, it's possible for a malicious/corrupt fs
image to set an unreasonably large value for sb_inopblog which will
cause ialloc_blks to be zero. If sb_imax_pct is also set, this results
in a division by zero error in the second do_div call. Therefore, force
maxicount to zero if ialloc_blks is zero.
Note that the kernel metadata verifiers will catch the garbage inopblog
value and abort the fs mount long before it tries to set up the inode
geometry; this is needed to avoid a crash in xfs_db while setting up the
xfs_mount structure.
Found by fuzzing sb_inopblog to 122 in xfs/350.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
The inode block mapping scrub function does more work for btree format
extent maps than is absolutely necessary -- first it will walk the bmbt
and check all the entries, and then it will load the incore tree and
check every entry in that tree, possibly for a second time.
Simplify the code and decrease check runtime by separating the two
responsibilities. The bmbt walk will make sure the incore extent
mappings are loaded, check the shape of the bmap btree (via xchk_btree)
and check that every bmbt record has a corresponding incore extent map;
and the incore extent map walk takes all the responsibility for checking
the mapping records and cross referencing them with other AG metadata.
This enables us to clean up some messy parameter handling and reduce
redundant code. Rename a few functions to make the split of
responsibilities clearer.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Fixes gcc warning:
fs/xfs/libxfs/xfs_btree.c:4475: warning: Excess function parameter 'max_recs' description in 'xfs_btree_sblock_v5hdr_verify'
fs/xfs/libxfs/xfs_btree.c:4475: warning: Excess function parameter 'pag_max_level' description in 'xfs_btree_sblock_v5hdr_verify'
Fixes: c5ab131ba0 ("libxfs: refactor short btree block verification")
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Memory we use to submit for IO needs strict alignment to the
underlying driver contraints. Worst case, this is 512 bytes. Given
that all allocations for IO are always a power of 2 multiple of 512
bytes, the kernel heap provides natural alignment for objects of
these sizes and that suffices.
Until, of course, memory debugging of some kind is turned on (e.g.
red zones, poisoning, KASAN) and then the alignment of the heap
objects is thrown out the window. Then we get weird IO errors and
data corruption problems because drivers don't validate alignment
and do the wrong thing when passed unaligned memory buffers in bios.
TO fix this, introduce kmem_alloc_io(), which will guaranteeat least
512 byte alignment of buffers for IO, even if memory debugging
options are turned on. It is assumed that the minimum allocation
size will be 512 bytes, and that sizes will be power of 2 mulitples
of 512 bytes.
Use this everywhere we allocate buffers for IO.
This no longer fails with log recovery errors when KASAN is enabled
due to the brd driver not handling unaligned memory buffers:
# mkfs.xfs -f /dev/ram0 ; mount /dev/ram0 /mnt/test
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Needed to feed into the allocation routine to guarantee the memory
buffers we add to bios are correctly aligned to the underlying
device.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When trying to correlate XFS kernel allocations to memory reclaim
behaviour, it is useful to know what allocations XFS is actually
attempting. This information is not directly available from
tracepoints in the generic memory allocation and reclaim
tracepoints, so these new trace points provide a high level
indication of what the XFS memory demand actually is.
There is no per-filesystem context in this code, so we just trace
the type of allocation, the size and the allocation constraints.
The kmem code also doesn't include much of the common XFS headers,
so there are a few definitions that need to be added to the trace
headers and a couple of types that need to be made common to avoid
needing to include the whole world in the kmem code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Since no caller is using KM_NOSLEEP and no callee branches on KM_SLEEP,
we can remove KM_NOSLEEP and replace KM_SLEEP with 0.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Benjamin Moody reported to Debian that XFS partially wedges when a chgrp
fails on account of being out of disk quota. I ran his reproducer
script:
# adduser dummy
# adduser dummy plugdev
# dd if=/dev/zero bs=1M count=100 of=test.img
# mkfs.xfs test.img
# mount -t xfs -o gquota test.img /mnt
# mkdir -p /mnt/dummy
# chown -c dummy /mnt/dummy
# xfs_quota -xc 'limit -g bsoft=100k bhard=100k plugdev' /mnt
(and then as user dummy)
$ dd if=/dev/urandom bs=1M count=50 of=/mnt/dummy/foo
$ chgrp plugdev /mnt/dummy/foo
and saw:
================================================
WARNING: lock held when returning to user space!
5.3.0-rc5 #rc5 Tainted: G W
------------------------------------------------
chgrp/47006 is leaving the kernel with locks still held!
1 lock held by chgrp/47006:
#0: 000000006664ea2d (&xfs_nondir_ilock_class){++++}, at: xfs_ilock+0xd2/0x290 [xfs]
...which is clearly caused by xfs_setattr_nonsize failing to unlock the
ILOCK after the xfs_qm_vop_chown_reserve call fails. Add the missing
unlock.
Reported-by: benjamin.moody@gmail.com
Fixes: 253f4911f2 ("xfs: better xfs_trans_alloc interface")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
The parens used in the while loop would result in error being assigned
the value 1 rather than the intended errno value.
This is required to return -ETXTBSY from follow on break_layout()
changes.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
While trawling through the dedupe file comparison code trying to fix
page deadlocking problems, Dave Chinner noticed that the reflink code
only takes shared IOLOCK/MMAPLOCKs on the source file. Because
page_mkwrite and directio writes do not take the EXCL versions of those
locks, this means that reflink can race with writer processes.
For pure remapping this can lead to undefined behavior and file
corruption; for dedupe this means that we cannot be sure that the
contents are identical when we decide to go ahead with the remapping.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
For 31-bit s390 user space, we have to pass pointer arguments through
compat_ptr() in the compat_ioctl handler.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Always try the native ioctl if we don't have a compat handler. This
removes a lot of boilerplate code as 'modern' ioctls should generally
be compat clean, and fixes the missing entries for the recently added
FS_IOC_GETFSLABEL/FS_IOC_SETFSLABEL ioctls.
Fixes: f7664b3197 ("xfs: implement online get/set fs label")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Zorro Lang reported a crash in generic/475 if we try to inactivate a
corrupt inode with a NULL attr fork (stack trace shortened somewhat):
RIP: 0010:xfs_bmapi_read+0x311/0xb00 [xfs]
RSP: 0018:ffff888047f9ed68 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888047f9f038 RCX: 1ffffffff5f99f51
RDX: 0000000000000002 RSI: 0000000000000008 RDI: 0000000000000012
RBP: ffff888002a41f00 R08: ffffed10005483f0 R09: ffffed10005483ef
R10: ffffed10005483ef R11: ffff888002a41f7f R12: 0000000000000004
R13: ffffe8fff53b5768 R14: 0000000000000005 R15: 0000000000000001
FS: 00007f11d44b5b80(0000) GS:ffff888114200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000ef6000 CR3: 000000002e176003 CR4: 00000000001606e0
Call Trace:
xfs_dabuf_map.constprop.18+0x696/0xe50 [xfs]
xfs_da_read_buf+0xf5/0x2c0 [xfs]
xfs_da3_node_read+0x1d/0x230 [xfs]
xfs_attr_inactive+0x3cc/0x5e0 [xfs]
xfs_inactive+0x4c8/0x5b0 [xfs]
xfs_fs_destroy_inode+0x31b/0x8e0 [xfs]
destroy_inode+0xbc/0x190
xfs_bulkstat_one_int+0xa8c/0x1200 [xfs]
xfs_bulkstat_one+0x16/0x20 [xfs]
xfs_bulkstat+0x6fa/0xf20 [xfs]
xfs_ioc_bulkstat+0x182/0x2b0 [xfs]
xfs_file_ioctl+0xee0/0x12a0 [xfs]
do_vfs_ioctl+0x193/0x1000
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x6f/0xb0
do_syscall_64+0x9f/0x4d0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f11d39a3e5b
The "obvious" cause is that the attr ifork is null despite the inode
claiming an attr fork having at least one extent, but it's not so
obvious why we ended up with an inode in that state.
Reported-by: Zorro Lang <zlang@redhat.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204031
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Continue our game of replacing ASSERTs for corrupt ondisk metadata with
EFSCORRUPTED returns.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
When the system is close-to-OOM, fsync() may fail due to -ENOMEM because
xfs_log_reserve() is using KM_MAYFAIL. It is a bad thing to fail writeback
operation due to user-triggerable OOM condition. Since we are not using
KM_MAYFAIL at xfs_trans_alloc() before calling xfs_log_reserve(), let's
use the same flags at xfs_log_reserve().
oom-torture: page allocation failure: order:0, mode:0x46c40(GFP_NOFS|__GFP_NOWARN|__GFP_RETRY_MAYFAIL|__GFP_COMP), nodemask=(null)
CPU: 7 PID: 1662 Comm: oom-torture Kdump: loaded Not tainted 5.3.0-rc2+ #925
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00
Call Trace:
dump_stack+0x67/0x95
warn_alloc+0xa9/0x140
__alloc_pages_slowpath+0x9a8/0xbce
__alloc_pages_nodemask+0x372/0x3b0
alloc_slab_page+0x3a/0x8d0
new_slab+0x330/0x420
___slab_alloc.constprop.94+0x879/0xb00
__slab_alloc.isra.89.constprop.93+0x43/0x6f
kmem_cache_alloc+0x331/0x390
kmem_zone_alloc+0x9f/0x110 [xfs]
kmem_zone_alloc+0x9f/0x110 [xfs]
xlog_ticket_alloc+0x33/0xd0 [xfs]
xfs_log_reserve+0xb4/0x410 [xfs]
xfs_trans_reserve+0x1d1/0x2b0 [xfs]
xfs_trans_alloc+0xc9/0x250 [xfs]
xfs_setfilesize_trans_alloc.isra.27+0x44/0xc0 [xfs]
xfs_submit_ioend.isra.28+0xa5/0x180 [xfs]
xfs_vm_writepages+0x76/0xa0 [xfs]
do_writepages+0x17/0x80
__filemap_fdatawrite_range+0xc1/0xf0
file_write_and_wait_range+0x53/0xa0
xfs_file_fsync+0x87/0x290 [xfs]
vfs_fsync_range+0x37/0x80
do_fsync+0x38/0x60
__x64_sys_fsync+0xf/0x20
do_syscall_64+0x4a/0x1c0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: eb01c9cd87 ("[XFS] Remove the xlog_ticket allocator")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In xchk_da_btree_block_check_sibling(), there is an if statement on
line 274 to check whether ds->state->altpath.blk[level].bp is NULL:
if (ds->state->altpath.blk[level].bp)
When ds->state->altpath.blk[level].bp is NULL, it is used on line 281:
xfs_trans_brelse(..., ds->state->altpath.blk[level].bp);
struct xfs_buf_log_item *bip = bp->b_log_item;
ASSERT(bp->b_transp == tp);
Thus, possible null-pointer dereferences may occur.
To fix these bugs, ds->state->altpath.blk[level].bp is checked before
being used.
These bugs are found by a static analysis tool STCheck written by us.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Explicitly initialize the onstack structures to zero so we don't leak
kernel memory into userspace when converting the in-core inumbers
structure to the v1 inogrp ioctl structure. Add a comment about why we
have to use memset to ensure that the padding holes in the structures
are set to zero.
Fixes: 5f19c7fc68 ("xfs: introduce v5 inode group structure")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
- Bring fs/xfs/libxfs/xfs_trans_inode.c in sync with userspace libxfs.
- Convert the xfs administrator guide to rst and move it into the
official admin guide under Documentation
-----BEGIN PGP SIGNATURE-----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=+DS3
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.3-merge-13' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs cleanups from Darrick Wong:
"We had a few more lateish cleanup patches come in for 5.3 -- a couple
of syncups with the userspace libxfs code and a conversion of the XFS
administrator's guide to ReST format.
Summary:
- Bring fs/xfs/libxfs/xfs_trans_inode.c in sync with userspace
libxfs.
- Convert the xfs administrator guide to rst and move it into the
official admin guide under Documentation"
* tag 'xfs-5.3-merge-13' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
Documentation: filesystem: Convert xfs.txt to ReST
xfs: sync up xfs_trans_inode with userspace
xfs: move xfs_trans_inode.c to libxfs/
persistent memory device that allows a guest VM to use DAX mechanisms to
access a host-file with host-page-cache. It arranges for MAP_SYNC to
be disabled and instead triggers a host fsync() when a 'write-cache
flush' command is sent to the virtual disk device.
- Miscellaneous small fixups.
-----BEGIN PGP SIGNATURE-----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=uAMG
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"Primarily just the virtio_pmem driver:
- virtio_pmem
The new virtio_pmem facility introduces a paravirtualized
persistent memory device that allows a guest VM to use DAX
mechanisms to access a host-file with host-page-cache. It arranges
for MAP_SYNC to be disabled and instead triggers a host fsync()
when a 'write-cache flush' command is sent to the virtual disk
device.
- Miscellaneous small fixups"
* tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
virtio_pmem: fix sparse warning
xfs: disable map_sync for async flush
ext4: disable map_sync for async flush
dax: check synchronous mapping is supported
dm: enable synchronous dax
libnvdimm: add dax_dev sync flag
virtio-pmem: Add virtio pmem driver
libnvdimm: nd_region flush callback support
libnvdimm, namespace: Drop uuid_t implementation detail
-----BEGIN PGP SIGNATURE-----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=g8xI
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20190715' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"A later pull request with some followup items. I had some vacation
coming up to the merge window, so certain things items were delayed a
bit. This pull request also contains fixes that came in within the
last few days of the merge window, which I didn't want to push right
before sending you a pull request.
This contains:
- NVMe pull request, mostly fixes, but also a few minor items on the
feature side that were timing constrained (Christoph et al)
- Report zones fixes (Damien)
- Removal of dead code (Damien)
- Turn on cgroup psi memstall (Josef)
- block cgroup MAINTAINERS entry (Konstantin)
- Flush init fix (Josef)
- blk-throttle low iops timing fix (Konstantin)
- nbd resize fixes (Mike)
- nbd 0 blocksize crash fix (Xiubo)
- block integrity error leak fix (Wenwen)
- blk-cgroup writeback and priority inheritance fixes (Tejun)"
* tag 'for-linus-20190715' of git://git.kernel.dk/linux-block: (42 commits)
MAINTAINERS: add entry for block io cgroup
null_blk: fixup ->report_zones() for !CONFIG_BLK_DEV_ZONED
block: Limit zone array allocation size
sd_zbc: Fix report zones buffer allocation
block: Kill gfp_t argument of blkdev_report_zones()
block: Allow mapping of vmalloc-ed buffers
block/bio-integrity: fix a memory leak bug
nvme: fix NULL deref for fabrics options
nbd: add netlink reconfigure resize support
nbd: fix crash when the blksize is zero
block: Disable write plugging for zoned block devices
block: Fix elevator name declaration
block: Remove unused definitions
nvme: fix regression upon hot device removal and insertion
blk-throttle: fix zero wait time for iops throttled group
block: Fix potential overflow in blk_report_zones()
blkcg: implement REQ_CGROUP_PUNT
blkcg, writeback: Implement wbc_blkcg_css()
blkcg, writeback: Add wbc->no_cgroup_owner
blkcg, writeback: Rename wbc_account_io() to wbc_account_cgroup_owner()
...
Add an XFS_ICHGTIME_CREATE case to xfs_trans_ichgtime() to keep in
sync with userspace. (Currently no kernel caller sends this flag.)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Userspace now has an identical xfs_trans_inode.c which it has already
moved to libxfs/ so do the same move for kernelspace.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
- Refactor inode geometry calculation into a single structure instead of
open-coding pieces everywhere.
- Add online repair to build options.
- Remove unnecessary function call flags and functions.
- Claim maintainership of various loose xfs documentation and header
files.
- Use struct bio directly for log buffer IOs instead of struct xfs_buf.
- Reduce log item boilerplate code requirements.
- Merge log item code spread across too many files.
- Further distinguish between log item commits and cancellations.
- Various small cleanups to the ag small allocator.
- Support cgroup-aware writeback
- libxfs refactoring for mkfs cleanup
- Remove unneeded #includes
- Fix a memory allocation miscalculation in the new log bio code
- Fix bisection problems
- Fix a crash in ioend processing caused by tripping over freeing of
preallocated transactions
- Split out a generic inode walk mechanism from the bulkstat code, hook
up all the internal users to use the walking code, then clean up
bulkstat to serve only the bulkstat ioctls.
- Add a multithreaded iwalk implementation to speed up quotacheck on
fast storage with many CPUs.
- Remove unnecessary return values in logging teardown functions.
- Supplement the bstat and inogrp structures with new bulkstat and
inumbers structures that have all the fields we need for v5
filesystem features and none of the padding problems of their
predecessors.
- Wire up new ioctls that use the new structures with a much simpler
bulk_ireq structure at the head instead of the pointerhappy mess we
had before.
- Enable userspace to constrain bulkstat returns to a single AG or a
single special inode so that we can phase out a lot of geometry
guesswork in userspace.
- Reduce memory consumption and zeroing overhead in extended attribute
scrub code.
- Fix some behavioral regressions in the new bulkstat backend code.
- Fix some behavioral regressions in the new log bio code.
-----BEGIN PGP SIGNATURE-----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=VEdn
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.3-merge-12' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"In this release there are a significant amounts of consolidations and
cleanups in the log code; restructuring of the log to issue struct
bios directly; new bulkstat ioctls to return v5 fs inode information
(and fix all the padding problems of the old ioctl); the beginnings of
multithreaded inode walks (e.g. quotacheck); and a reduction in memory
usage in the online scrub code leading to reduced runtimes.
- Refactor inode geometry calculation into a single structure instead
of open-coding pieces everywhere.
- Add online repair to build options.
- Remove unnecessary function call flags and functions.
- Claim maintainership of various loose xfs documentation and header
files.
- Use struct bio directly for log buffer IOs instead of struct
xfs_buf.
- Reduce log item boilerplate code requirements.
- Merge log item code spread across too many files.
- Further distinguish between log item commits and cancellations.
- Various small cleanups to the ag small allocator.
- Support cgroup-aware writeback
- libxfs refactoring for mkfs cleanup
- Remove unneeded #includes
- Fix a memory allocation miscalculation in the new log bio code
- Fix bisection problems
- Fix a crash in ioend processing caused by tripping over freeing of
preallocated transactions
- Split out a generic inode walk mechanism from the bulkstat code,
hook up all the internal users to use the walking code, then clean
up bulkstat to serve only the bulkstat ioctls.
- Add a multithreaded iwalk implementation to speed up quotacheck on
fast storage with many CPUs.
- Remove unnecessary return values in logging teardown functions.
- Supplement the bstat and inogrp structures with new bulkstat and
inumbers structures that have all the fields we need for v5
filesystem features and none of the padding problems of their
predecessors.
- Wire up new ioctls that use the new structures with a much simpler
bulk_ireq structure at the head instead of the pointerhappy mess we
had before.
- Enable userspace to constrain bulkstat returns to a single AG or a
single special inode so that we can phase out a lot of geometry
guesswork in userspace.
- Reduce memory consumption and zeroing overhead in extended
attribute scrub code.
- Fix some behavioral regressions in the new bulkstat backend code.
- Fix some behavioral regressions in the new log bio code"
* tag 'xfs-5.3-merge-12' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (100 commits)
xfs: chain bios the right way around in xfs_rw_bdev
xfs: bump INUMBERS cursor correctly in xfs_inumbers_walk
xfs: don't update lastino for FSBULKSTAT_SINGLE
xfs: online scrub needn't bother zeroing its temporary buffer
xfs: only allocate memory for scrubbing attributes when we need it
xfs: refactor attr scrub memory allocation function
xfs: refactor extended attribute buffer pointer functions
xfs: attribute scrub should use seen_enough to pass error values
xfs: allow single bulkstat of special inodes
xfs: specify AG in bulk req
xfs: wire up the v5 inumbers ioctl
xfs: wire up new v5 bulkstat ioctls
xfs: introduce v5 inode group structure
xfs: introduce new v5 bulkstat structure
xfs: rename bulkstat functions
xfs: remove various bulk request typedef usage
fs: xfs: xfs_log: Change return type from int to void
xfs: poll waiting for quotacheck
xfs: multithreaded iwalk implementation
xfs: refactor INUMBERS to use iwalk functions
...
- Standardize parameter checking for the SETFLAGS and FSSETXATTR ioctls
(which were the file attribute setters for ext4 and xfs and have now
been hoisted to the vfs)
- Only allow the DAX flag to be set on files and directories.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAl0aJgMACgkQ+H93GTRK
tOuKkg//SJaxcB63uVPZk9hDraYTmyo9OXRRX6X9WwDKPTWwa88CUwS1ny1QF7Mt
zMkgzG2/y2Rs9PQ0ARoPbh1hNb2CXnvA+xnzUEev1MW6UN/nTFMZEOPn2ZQ+DxQE
gg/0U56kKgtjtXzBZVpTgHzSETivdXwHxFW3hiTtyRXg+4ulgDIZLOjN2wRB+Pdb
X8ZmM6MqKOTbhQEXlw13TlCKBzoMjC1w4UU4rkZPjoSjAaUWiPfrk/XU7qgguf9p
v1dbSN2dADQ19jzZ1dmggXnlJsRMZjk/ls5rxJlB5DHDbh6YgnA2TE+tYrtH28eB
uyKfD+RQnMzRVdmH8PsMQRQQFXR2UYyprVP7a6wi6TkB+gytn7sR5uT4sbAhmhcF
TiTYfYNRXzemHCewyOwOsUE/7oCeiJcdbqiPAHHD/jYLZfRjSXDcGzz3+7ZYZ3GO
hRxUhpxHPbkmK4T2OxhzReCbRsLN/0BeEcDdLkNWmi2FTh3V1gYzMGkgI9wsVbsd
pHjoGIHbMPWqktF/obuGq96WVfYBBaWJ6WNzQqKT4dQYAJBW2omxitXQHLpi6cjt
hG5ncxa3cPpWx4t3Lx2hb0TPS7RyYvuoQIcS/Me2RWioxrwWrgnOqdHFfLEwWpfN
jRowdWiGgOIsq8hMt7qycmGCXzbgsbaA/7oRqh8TiwM9taPOM4c=
=uH2E
-----END PGP SIGNATURE-----
Merge tag 'vfs-fix-ioctl-checking-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull common SETFLAGS/FSSETXATTR parameter checking from Darrick Wong:
"Here's a patch series that sets up common parameter checking functions
for the FS_IOC_SETFLAGS and FS_IOC_FSSETXATTR ioctl implementations.
The goal here is to reduce the amount of behaviorial variance between
the filesystems where those ioctls originated (ext2 and XFS,
respectively) and everybody else.
- Standardize parameter checking for the SETFLAGS and FSSETXATTR
ioctls (which were the file attribute setters for ext4 and xfs and
have now been hoisted to the vfs)
- Only allow the DAX flag to be set on files and directories"
* tag 'vfs-fix-ioctl-checking-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
vfs: only allow FSSETXATTR to set DAX flag on files and dirs
vfs: teach vfs_ioc_fssetxattr_check to check extent size hints
vfs: teach vfs_ioc_fssetxattr_check to check project id info
vfs: create a generic checking function for FS_IOC_FSSETXATTR
vfs: create a generic checking and prep function for FS_IOC_SETFLAGS
- Create a generic copy_file_range handler and make individual
filesystems responsible for calling it (i.e. no more assuming that
do_splice_direct will work or is appropriate)
- Refactor copy_file_range and remap_range parameter checking where they
are the same
- Install missing copy_file_range parameter checking(!)
- Remove suid/sgid and update mtime like any other file write
- Change the behavior so that a copy range crossing the source file's
eof will result in a short copy to the source file's eof instead of
EINVAL
- Permit filesystems to decide if they want to handle cross-superblock
copy_file_range in their local handlers.
-----BEGIN PGP SIGNATURE-----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=qM44
-----END PGP SIGNATURE-----
Merge tag 'copy-file-range-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull copy_file_range updates from Darrick Wong:
"This fixes numerous parameter checking problems and inconsistent
behaviors in the new(ish) copy_file_range system call.
Now the system call will actually check its range parameters
correctly; refuse to copy into files for which the caller does not
have sufficient privileges; update mtime and strip setuid like file
writes are supposed to do; and allows copying up to the EOF of the
source file instead of failing the call like we used to.
Summary:
- Create a generic copy_file_range handler and make individual
filesystems responsible for calling it (i.e. no more assuming that
do_splice_direct will work or is appropriate)
- Refactor copy_file_range and remap_range parameter checking where
they are the same
- Install missing copy_file_range parameter checking(!)
- Remove suid/sgid and update mtime like any other file write
- Change the behavior so that a copy range crossing the source file's
eof will result in a short copy to the source file's eof instead of
EINVAL
- Permit filesystems to decide if they want to handle
cross-superblock copy_file_range in their local handlers"
* tag 'copy-file-range-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fuse: copy_file_range needs to strip setuid bits and update timestamps
vfs: allow copy_file_range to copy across devices
xfs: use file_modified() helper
vfs: introduce file_modified() helper
vfs: add missing checks to copy_file_range
vfs: remove redundant checks from generic_remap_checks()
vfs: introduce generic_file_rw_checks()
vfs: no fallback for ->copy_file_range
vfs: introduce generic_copy_file_range()
We need to chain the earlier bios to the later ones, so that
submit_bio_wait waits on the bio that all the completions are
dispatched to.
Fixes: 6ad5b3255b ("xfs: use bios directly to read and write the log recovery buffers")
Reported-by: Dave Chinner <david@fromorbit.com>
Tested-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There's a subtle unit conversion error when we increment the INUMBERS
cursor at the end of xfs_inumbers_walk. If there's an inode chunk at
the very end of the AG /and/ the AG size is a perfect power of two, the
startino of that last chunk (which is in units of AG inodes) will be 63
less than (1 << agino_log). If we add XFS_INODES_PER_CHUNK to the
startino, we end up with a startino that's larger than (1 << agino_log)
and when we convert that back to fs inode units we'll rip off that upper
bit and wind up back at the start of the AG.
Fix this by converting to units of fs inodes before adding
XFS_INODES_PER_CHUNK so that we'll harmlessly end up pointing to the
next AG.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The kernel test robot found a regression of xfs/054 in the conversion of
bulkstat to use the new iwalk infrastructure -- if a caller set *lastip
= 128 and invoked FSBULKSTAT_SINGLE, the bstat info would be for inode
128, but *lastip would be increased by the kernel to 129.
FSBULKSTAT_SINGLE never incremented lastip before, so it's incorrect to
make such an update to the internal lastino value now.
Fixes: 2810bd6840 ("xfs: convert bulkstat to new iwalk infrastructure")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Dont support 'MAP_SYNC' with non-DAX files and DAX files
with asynchronous dax_device. Virtio pmem provides
asynchronous host page cache flush mechanism. We don't
support 'MAP_SYNC' with virtio pmem and xfs.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The xattr scrubber functions use the temporary memory buffer either for
storing bitmaps or for testing if attribute value extraction works. The
bitmap code always zeroes what it needs and the value extraction sets
the buffer contents, so it's not necessary to waste CPU time zeroing on
allocation.
Note that while we never read the contents that the attr value
extraction function sets, we do need to call it to check the remote
attribute header and CRCs to check for corruption.
A flame graph analysis showed that we were spending 7% of a xfs_scrub
run (the whole program, not just the attr scrubber itself) allocating
and zeroing 64k segments needlessly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In examining a flame graph of time spent running xfs_scrub on various
filesystems, I noticed that we spent nearly 7% of the total runtime on
allocating a zeroed 65k buffer for every SCRUB_TYPE_XATTR invocation.
We do this even if none of the attribute values were anywhere near 64k
in size, even if there were no attribute blocks to check space on, and
even if it just turns out there are no attributes at all.
Therefore, rearrange the xattr buffer setup code to support reallocating
with a bigger buffer and redistribute the callers of that function so
that we only allocate memory just prior to needing it, and only allocate
as much as we need. If we can't get memory with the ILOCK held we'll
bail out with EDEADLOCK which will allocate the maximum memory.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Move the code that allocates memory buffers for the extended attribute
scrub code into a separate function so we can reduce memory allocations
in the next patch.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Replace the open-coded attribute buffer pointer calculations with helper
functions to make it more obvious what we're doing with our freeform
memory allocation w.r.t. either storing xattr values or computing btree
block free space.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When we're iterating all the attributes using the built-in xattr
iterator, we can use the seen_enough variable to pass error codes back
to the main scrub function instead of flattening them into 0/1. This
will be used in a more exciting fashion in upcoming patches.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Create a new bulk ireq flag that enables userspace to ask us for a
special inode number instead of interpreting @ino as a literal inode
number. This enables us to query the root inode easily.
The reason for adding the ability to query specifically the root
directory inode is that certain programs (xfsdump and xfsrestore) want
to confirm when they've been pointed to the root directory. The
userspace code assumes the root directory is always the first result
from calling bulkstat with lastino == 0, but this isn't true if the
(initial btree roots + initial AGFL + inode alignment padding) is itself
long enough to be allocated to new inodes if all of those blocks should
happen to be free at the same time. Rather than make userspace guess
at internal filesystem state, we provide a direct query.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add a new xfs_bulk_ireq flag to constrain the iteration to a single AG.
If the passed-in startino value is zero then we start with the first
inode in the AG that the user passes in; otherwise, we iterate only
within the same AG as the passed-in inode.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Introduce a new "v5" inode group structure that fixes the alignment
and padding problems of the existing structure.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Introduce a new version of the in-core bulkstat structure that supports
our new v5 format features. This structure also fills the gaps in the
previous structure. We leave wiring up the ioctls for the next patch.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Rename the bulkstat functions to 'fsbulkstat' so that they match the
ioctl names. We will be introducing a new set of bulkstat/inumbers
ioctls soon, and it will be important to keep the names straight.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Remove xfs_bstat_t, xfs_fsop_bulkreq_t, xfs_inogrp_t, and similarly
named compat typedefs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Change return types of below functions as they never fails
xfs_log_mount_cancel
xlog_recover_cancel
xlog_recover_cancel_intents
fix below issue reported by coccicheck
fs/xfs/xfs_log_recover.c:4886:7-12: Unneeded variable: "error". Return
"0" on line 4926
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Create a pwork destroy function that uses polling instead of
uninterruptible sleep to wait for work items to finish so that we can
touch the softlockup watchdog. IOWs, gross hack.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Create a parallel iwalk implementation and switch quotacheck to use it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Now that we have generic functions to walk inode records, refactor the
INUMBERS implementation to use it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Refactor xfs_iwalk_ag_start and xfs_iwalk_ag so that the bits that are
particular to bulkstat (trimming the start irec, starting inode
readahead, and skipping empty groups) can be controlled via flags in the
iwag structure.
This enables us to add a new function to walk all inobt records which
will be used for the new INUMBERS implementation in the next patch.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In preparation for reusing the iwalk code for the inogrp walking code
(aka INUMBERS), move the initial inobt lookup and retrieval code out of
xfs_iwalk_grab_ichunk so that we call the masking code only when we need
to trim out the inodes that came before the cursor in the inobt record
(aka BULKSTAT).
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Refactor xfs_iwalk_ichunk_ra to avoid long conditionals.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Now that the inode chunk grabbing function is a static function in the
iwalk code, change its behavior so that @agino is the inode where we
want to /start/ the iteration. This reduces cognitive friction with the
callers and simplifes the code.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Now that we've reworked the bulkstat code to use iwalk, we can move the
old bulkstat ichunk helpers to xfs_iwalk.c. No functional changes here.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The existing inode walk prefetch is based on the old bulkstat code,
which simply allocated 4 pages worth of memory and prefetched that many
inobt records, regardless of however many inodes the caller requested.
65536 inodes is a lot to prefetch (~32M on x64, ~512M on arm64) so let's
scale things down a little more intelligently based on the number of
inodes requested, etc.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Create a new ibulk structure incore to help us deal with bulk inode stat
state tracking and then convert the bulkstat code to use the new iwalk
iterator. This disentangles inode walking from bulk stat control for
simpler code and enables us to isolate the formatter functions to the
ioctl handling code.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When userspace passes in a @lastip pointer we should copy the results
back, even if the @ocount pointer is NULL.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Convert quotacheck to use the new iwalk iterator to dig through the
inodes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Create a new iterator function to simplify walking inodes in an XFS
filesystem. This new iterator will replace the existing open-coded
walking that goes on in various places.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Currently, xfs doesn't have generic error codes defined for "stop
iterating"; we just reuse the XFS_BTREE_QUERY_* return values. This
looks a little weird if we're not actually iterating a btree index.
Before we start adding more iterators, we should create general
XFS_ITER_{CONTINUE,ABORT} return values and define the XFS_BTREE_QUERY_*
ones from that.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Move the extent size hint checks that aren't xfs-specific to the vfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Create a generic checking function for the incoming FS_IOC_FSSETXATTR
fsxattr values so that we can standardize some of the implementation
behaviors.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
'bio->bi_iter.bi_size' is 'unsigned int', which at most hold 4G - 1
bytes.
Before 07173c3ec2 ("block: enable multipage bvecs"), one bio can
include very limited pages, and usually at most 256, so the fs bio
size won't be bigger than 1M bytes most of times.
Since we support multi-page bvec, in theory one fs bio really can
be added > 1M pages, especially in case of hugepage, or big writeback
with too many dirty pages. Then there is chance in which .bi_size
is overflowed.
Fixes this issue by using bio_full() to check if the added segment may
overflow .bi_size.
Cc: Liu Yiding <liuyd.fnst@cn.fujitsu.com>
Cc: kernel test robot <rong.a.chen@intel.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: linux-xfs@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 07173c3ec2 ("block: enable multipage bvecs")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of a magic flag for xfs_trans_alloc, just ensure all callers
that can't relclaim through the file system use memalloc_nofs_save to
set the per-task nofs flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Compare the block layer status directly instead of converting it to
an errno first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no real problem merging ioends that go beyond i_size into an
ioend that doesn't. We just need to move the append transaction to the
base ioend. Also use the opportunity to use a real error code instead
of the magic 1 to cancel the transactions, and write a comment
explaining the scheme.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The fail argument is long gone, update the comment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Properly allocate the space for the bio_vecs instead of just one byte
per bio_vec.
Fixes: 79b54d9bfc ("xfs: use bios directly to write log buffers")
Reported-by: syzbot+b75afdbe271a0d7ac4f6@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There are many, many xfs header files which are included but
unneeded (or included twice) in the xfs code, so remove them.
nb: xfs_linux.h includes about 9 headers for everyone, so those
explicit includes get removed by this. I'm not sure what the
preference is, but if we wanted explicit includes everywhere,
a followup patch could remove those xfs_*.h includes from
xfs_linux.h and move them into the files that need them.
Or it could be left as-is.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Link every newly allocated writeback bio to cgroup pointed to by the
writeback control structure, and charge every byte written back to it.
Tested-by: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move setting up operation and write hint to xfs_alloc_ioend, and
then just copy over all needed information from the previous bio
in xfs_chain_bio and stop passing various parameters to it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When we're writing out a fresh new AG, make sure that we don't list an
internal log as free and that we create the rmap for the region. growfs
never does this, but we will need it when we hook up mkfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Refactor the code that populates the free space btrees of a new AG so
that we can avoid code duplication once things start getting
complicated.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfs_alloc_ag_vextent_small() doesn't update the output parameters in
the event of an AGFL allocation. Instead, it updates the
xfs_alloc_arg structure directly to complete the allocation.
Update both args and the output params to provide consistent
behavior for future callers.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The small allocation helper is implemented in a way that is fairly
tightly integrated to the existing allocation algorithms. It expects
a cntbt cursor beyond the end of the tree, attempts to locate the
last record in the tree and only attempts an AGFL allocation if the
cntbt is empty.
The upcoming generic algorithm doesn't rely on the cntbt processing
of this function. It will only call this function when the cntbt
doesn't have a big enough extent or is empty and thus AGFL
allocation is the only remaining option. Tweak
xfs_alloc_ag_vextent_small() to handle a NULL cntbt cursor and skip
the cntbt logic. This facilitates use by the existing allocation
code and new code that only requires an AGFL allocation attempt.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move the small allocation helper further up in the file to avoid the
need for a function declaration. The remaining declarations will be
removed by followup patches. No functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_alloc_ag_vextent_small() is kind of a mess. Clean it up in
preparation for future changes. No functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Keep all bmap item related code together.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Keep all rmap item related code together in one file.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Keep all the refcount item related code together in one file.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Keep all the extree item related code together in one file.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no good reason to keep these two functions separate.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no good reason to keep these two functions separate.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no good reason to keep these two functions separate.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no good reason to keep these two functions separate.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace the hand grown linked list handling and cil context attachment
with the standard list_head structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The cast is not type safe, and we can just dereference the first
member instead to start with.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We have various items that are released from ->iop_comitting. Add a
flag to just call ->iop_release from the commit path to avoid tons
of boilerplate code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The iop_unlock method is called when comitting or cancelling a
transaction. In the latter case, the transaction may or may not be
aborted. While there is no known problem with the current code in
practice, this implementation is limited in that any log item
implementation that might want to differentiate between a commit and a
cancellation must rely on the aborted state. The aborted bit is only
set when the cancelled transaction is dirty, however. This means that
there is no way to distinguish between a commit and a clean transaction
cancellation.
For example, intent log items currently rely on this distinction. The
log item is either transferred to the CIL on commit or released on
transaction cancel. There is currently no possibility for a clean intent
log item in a transaction, but if that state is ever introduced a cancel
of such a transaction will immediately result in memory leaks of the
associated log item(s). This is an interface deficiency and landmine.
To clean this up, replace the iop_unlock method with an iop_release
method that is specific to transaction cancel. The existing
iop_committing method occurs at the same time as iop_unlock in the
commit path and there is no need for two separate callbacks here.
Overload the iop_committing method with the current commit time
iop_unlock implementations to eliminate the need for the latter and
further simplify the interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
While commiting items looks very similar to freeing them on error it is
a different operation, and they will diverge a bit soon.
Split out the commit case from xfs_trans_free_items, inline it into
xfs_log_commit_cil and give it a separate trace point.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This method should never be called, so don't waste code on it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Just check if they are present first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Just pass a straight bool aborted instead of abusing XFS_LI_ABORTED as a
flag in function parameters.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We need to derive the mount pointer from a buffer in a lot of place.
Add a direct pointer to short cut the pointer chasing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This field is now always idential to b_length.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that the log code doesn't abuse this field any more we can
declare it as a struct xfs_buf_log_item pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that the log code uses bios directly we can drop various special
cases in the buffer cache code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that we don't use struct xfs_buf to hold log recovery buffer rename
the related functions and variables to just talk of a buffer instead of
using the bp name that we usually use for xfs_buf related functionality.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The xfs_buf structure is basically used as a glorified container for
a memory allocation in the log recovery code. Replace it with a
call to kmem_alloc_large and a simple abstraction to read into or
write from it synchronously using chained bios.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This simplifies both the helper and the callers. We lost a bit of
size sanity checking, but that is already covered by KASAN if needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move the workqueue used for log I/O completions from struct xfs_mount
to struct xlog to keep it self contained in the log code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: destroy the log workqueue after ensuring log ios are done]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Currently the XFS logging code uses the xfs_buf structure and
associated APIs to write the log buffers to disk. This requires
various special cases in the log code and is generally not very
optimal.
Instead of using a buffer just allocate a kmem_alloc_larger region for
each log buffer, and use a bio and bio_vec array embedded in the iclog
structure to write the buffer to disk. This also allows for using
the bio split and chaining case to deal with the case of a log
buffer wrapping around the end of the log.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: don't split if/else with an #endif]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use the slightly shorter way to get at the buftarg for the log device
wherever we can in the log and log recovery code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The only caller unconditionally passes true here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Just a small bit of code tidying up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Split out another self-contained bit of code from xlog_sync.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Split out a self-contained chunk of code from xlog_sync that calculates
the split offset for an iclog that wraps the log end and bumps the
cycles for the second half.
Use the chance to bring some sanity to the variables used to track the
split in xlog_sync by not changing the count variable, and instead use
split as the offset for the split and use those to calculate the
sizes and offsets for the two write buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace the not very useful xlog_bdstrat wrapper with a new version that
that takes care of all the common logic for writing log buffers. Use
the opportunity to avoid overloading the buffer address with the log
relative address, and to shed the unused return value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
If we have to split a log write because it wraps the end of the log we
can't just use REQ_PREFLUSH to flush before the first log write,
as the writes might get reordered somewhere in the I/O stack. Issue
a manual flush in that case so that the ordering of the two log I/Os
doesn't matter.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This value is the only flag in ic_state, which we otherwise use as
a state. Switch it to a new debug-only field and also report and
actual error in the buffer in the I/O completion path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reformat xlog_get_lowest_lsn to our usual style.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We don't really need all the messy branches in the function, as it
really does three things, out of which 2 are common for all branches:
1) set up mount point log buffer size and count values if not already
done from mount options
2) calculate the number of log headers
3) set up all the values in struct xlog based on the above
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This field is never used, so we can simply kill it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Rename the function to kmem_to_page and move it to kmem.h together
with our kmem_large allocator that may either return kmalloced or
vmalloc pages.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Assining a numerical value that is not close to the flags
defined near by is just asking for conflicts later on.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The inode geometry structure isn't related to ondisk format; it's
support for the mount structure. Move it to xfs_shared.h.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We currently have an input same_page parameter to __bio_try_merge_page
to prohibit merging in the same page. The rationale for that is that
some callers need to account for every page added to a bio. Instead of
letting these callers call twice into the merge code to account for the
new vs existing page cases, just turn the paramter into an output one that
returns if a merge in the same page occured and let them act accordingly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are several functions which take a flag argument that is
only ever passed as "0," so remove these arguments.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The field is only used for a few assertations. Shrink the dqout
structure instead, similarly to what commit f3ca87389d
("xfs: remove i_transp") did for the xfs_inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_buf_zero is the only caller of xfs_buf_iomove. Remove support
for copying from or to the buffer in xfs_buf_iomove and merge the
two functions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The flags value is always passed as 0 so remove the argument.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The XFS_BUILD_OPTIONS string, shown at module init time and
in modinfo output, does not currently include all available
build options. So, add in CONFIG_XFS_WARN and CONFIG_XFS_REPAIR.
It has been suggested in some quarters
That this is not enough.
Well ...
Anybody who would like to see this in a sysfs file can send
a patch. :)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Finish converting all the old inode_cluster_size >> inopblog users to
inodes_per_cluster.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
inode_cluster_size is supposed to represent the size (in bytes) of an
inode cluster buffer. We avoid having to handle multiple clusters per
filesystem block on filesystems with large blocks by openly rounding
this value up to 1 FSB when necessary. However, we never reset
inode_cluster_size to reflect this new rounded value, which adds to the
potential for mistakes in calculating geometries.
Fix this by setting inode_cluster_size to reflect the rounded-up size if
needed, and special-case the few places in the sparse inodes code where
we actually need the smaller value to validate on-disk metadata.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Migrate all of the inode geometry setup code from xfs_mount.c into a
single libxfs function that we can share with xfsprogs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Separate the inode geometry information into a distinct structure.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Note that by using the helper, the order of calling file_remove_privs()
after file_update_mtime() in xfs_file_aio_write_checks() has changed.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
- Fix some forgotten strings in a log debugging function
- Fix incorrect unit conversion in online fsck code
-----BEGIN PGP SIGNATURE-----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=WFWW
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.2-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Here are a couple more bug fixes for 5.2. Changes since last update:
- Fix some forgotten strings in a log debugging function
- Fix incorrect unit conversion in online fsck code"
* tag 'xfs-5.2-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: inode btree scrubber should calculate im_boffset correctly
xfs: fix broken log reservation debugging
The im_boffset field is in units of bytes, whereas XFS_INO_OFFSET
returns a value in units of inodes. Convert the units so that scrub on
a 64k-block filesystem works correctly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
xlog_print_tic_res() is supposed to print a human readable string for
each element of the log ticket reservation array. Unfortunately, I
forgot to update the string array when we added rmap & reflink support,
so the debug message prints "region[3]: (null) - 352 bytes" which isn't
useful at all. Add the missing elements and add a build check so that
we don't forget again to add a string when adding a new XLOG_REG_TYPE.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
- Fix an accounting mistake where we included the log space when
calculating the reserve space for metadata expansion.
-----BEGIN PGP SIGNATURE-----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=C52a
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.2-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Darrick Wong:
"Fix an accounting mistake where we included the log space when
calculating the reserve space for metadata expansion"
* tag 'xfs-5.2-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: don't reserve per-AG space for an internal log
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It turns out that the log can consume nearly all the space in an AG, and
when this happens this it's possible that there will be less free space
in the AG than the reservation would try to hide. On a debug kernel
this can trigger an ASSERT in xfs/250:
XFS: Assertion failed: xfs_perag_resv(pag, XFS_AG_RESV_METADATA)->ar_reserved + xfs_perag_resv(pag, XFS_AG_RESV_RMAPBT)->ar_reserved <= pag->pagf_freeblks + pag->pagf_flcount, file: fs/xfs/libxfs/xfs_ag_resv.c, line: 319
The log is permanently allocated, so we know we're never going to have
to expand the btrees to hold any records associated with the log space.
We therefore can treat the space as if it doesn't exist.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Currently, the Kbuild core manipulates header search paths in a crazy
way [1].
To fix this mess, I want all Makefiles to add explicit $(srctree)/ to
the search paths in the srctree. Some Makefiles are already written in
that way, but not all. The goal of this work is to make the notation
consistent, and finally get rid of the gross hacks.
Having whitespaces after -I does not matter since commit 48f6e3cf5b
("kbuild: do not drop -I without parameter").
[1]: https://patchwork.kernel.org/patch/9632347/
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAlzR0AAQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpo0MD/47D1kBK9rGzkAwIz1Jkh1Qy/ITVaDJzmHJ
UP5uncQsgKFLKMR1LbRcrWtmk2MwFDNULGbteHFeCYE1ypCrTgpWSp5+SJluKd1Q
hma9krLSAXO9QiSaZ4jafshXFIZxz6IjakOW8c9LrT80Ze47yh7AxiLwDafcp/Jj
x6NW790qB7ENDtfarDkZk14NCS8HGLRHO5B21LB+hT0Kfbh0XZaLzJdj7Mck1wPA
VT8hL9mPuA++AjF7Ra4kUjwSakgmajTa3nS2fpkwTYdztQfas7x5Jiv7FWxrrelb
qbabkNkWKepcHAPEiZR7o53TyfCucGeSK/jG+dsJ9KhNp26kl1ci3frl5T6PfVMP
SPPDjsKIHs+dqFrU9y5rSGhLJqewTs96hHthnLGxyF67+5sRb5+YIy+dcqgiyc/b
TUVyjCD6r0cO2q4v9VhwnhOyeBUA9Rwbu8nl7JV5Q45uG7qI4BC39l1jfubMNDPO
GLNGUUzb6ER7z6lYINjRSF2Jhejsx8SR9P7jhpb1Q7k/VvDDxO1T4FpwvqWFz9+s
Gn+s6//+cA6LL+42eZkQjvwF2CUNE7TaVT8zdb+s5HP1RQkZToqUnsQCGeRTrFni
RqWXfW9o9+awYRp431417oMdX/LvLGq9+ZtifRk9DqDcowXevTaf0W2RpplWSuiX
RcCuPeLAVg==
=Ot0g
-----END PGP SIGNATURE-----
Merge tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Nothing major in this series, just fixes and improvements all over the
map. This contains:
- Series of fixes for sed-opal (David, Jonas)
- Fixes and performance tweaks for BFQ (via Paolo)
- Set of fixes for bcache (via Coly)
- Set of fixes for md (via Song)
- Enabling multi-page for passthrough requests (Ming)
- Queue release fix series (Ming)
- Device notification improvements (Martin)
- Propagate underlying device rotational status in loop (Holger)
- Removal of mtip32xx trim support, which has been disabled for years
(Christoph)
- Improvement and cleanup of nvme command handling (Christoph)
- Add block SPDX tags (Christoph)
- Cleanup/hardening of bio/bvec iteration (Christoph)
- A few NVMe pull requests (Christoph)
- Removal of CONFIG_LBDAF (Christoph)
- Various little fixes here and there"
* tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block: (164 commits)
block: fix mismerge in bvec_advance
block: don't drain in-progress dispatch in blk_cleanup_queue()
blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release
blk-mq: always free hctx after request queue is freed
blk-mq: split blk_mq_alloc_and_init_hctx into two parts
blk-mq: free hw queue's resource in hctx's release handler
blk-mq: move cancel of requeue_work into blk_mq_release
blk-mq: grab .q_usage_counter when queuing request from plug code path
block: fix function name in comment
nvmet: protect discovery change log event list iteration
nvme: mark nvme_core_init and nvme_core_exit static
nvme: move command size checks to the core
nvme-fabrics: check more command sizes
nvme-pci: check more command sizes
nvme-pci: remove an unneeded variable initialization
nvme-pci: unquiesce admin queue on shutdown
nvme-pci: shutdown on timeout during deletion
nvme-pci: fix psdt field for single segment sgls
nvme-multipath: don't print ANA group state by default
nvme-multipath: split bios with the ns_head bio_set before submitting
...
There are several functions which have no opportunity to return
an error, and don't contain any ASSERTs which could be argued
to be better constructed as error cases. So, make them voids
to simplify the callers.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
We only have two callers that need the integer loop iterator, and they
can easily maintain it themselves.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Coly Li <colyli@suse.de>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Teach online scrub how to check the filesystem summary counters. We use
the incore delalloc block counter along with the incore AG headers to
compute expected values for fdblocks, icount, and ifree, and then check
that the percpu counter is within a certain threshold of the expected
value. This is done to avoid having to freeze or otherwise lock the
filesystem, which means that we're only checking that the counters are
fairly close, not that they're exactly correct.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The text isn't really any more useful than the default unknown option
handling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
During testing of xfs/141 on a V4 filesystem, I observed some
inconsistent behavior with regards to resources that are held (i.e.
remain locked) across a defer roll. The transaction roll always gives
the defer roll function a new transaction, even if committing the old
transaction fails. However, the defer roll function only rejoins the
held resources if the transaction commit succeedied. This means that
callers of defer roll have to figure out whether the held resources are
attached to the transaction being passed back.
Worse yet, if the defer roll was part of a defer finish call, we have a
third possibility: the defer finish could pass back a dirty transaction
with dirty held resources and an error code.
The only sane way to handle all of these scenarios is to require that
the code that held the resource either cancel the transaction before
unlocking and releasing the resources, or use functions that detach
resources from a transaction properly (e.g. xfs_trans_brelse) if they
need to drop the reference before committing or cancelling the
transaction.
In order to make this so, change the defer roll code to join held
resources to the new transaction unconditionally and fix all the bhold
callers to release the held buffers correctly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
xfs_prepare_shift() fails to check the error return from
xfs_flush_unmap_range(). If the latter fails, that could lead to an
insert/collapse range operation over a delalloc range, which is not
supported.
Add an error check and return appropriately. This is reproduced
rarely by generic/475.
Fixes: 7f9f71be84 ("xfs: extent shifting doesn't fully invalidate page cache")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
In theory, the incore per-AG structure counters should match the ones on
disk, so check that.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The forthcoming summary counter patch races with regular filesystem
activity to compute rough expected values for the counters. This design
was chosen to avoid having to freeze the entire filesystem to check the
counters, but while that's running we'd prefer to minimize background
reclamation activity to reduce the perturbations to the incore free
block count. Therefore, provide a way for scrubbers to disable
background posteof and cowblock reclamation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
"reclaim" is used throughout the icache code to mean reclamation of
incore inode structures. It's also used for two helper functions that
toggle background deletion of speculative preallocations. Separate
the second of the two uses to make things less confusing.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add a percpu counter to track the number of blocks directly reserved for
delayed allocations on the data device. This counter (in contrast to
i_delayed_blks) does not track allocated CoW staging extents or anything
going on with the realtime device. It will be used in the upcoming
summary counter scrub function to check the free block counts without
having to freeze the filesystem or walk all the inodes to find the
delayed allocations.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
In xrep_roll_ag_trans, the transaction roll will always set sc->tp to
the new transaction, even if committing the old one fails. A bare
transaction roll leaves the buffer(s) locked but not joined to the new
transaction, so it's not necessary to release the hold if the roll
fails. Remove the incorrect xfs_trans_bhold_release calls.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
We passed an inode into xfs_ioctl_setattr_get_trans with join_flags
indicating which locks are held on that inode. If we can't allocate a
transaction then we need to unlock the inode before we bail out, like
all the other error paths do.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
There's only a few uses left, so just kill the typedef while we're at
it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Widen the incore inode's i_delayed_blks counter to be a 64-bit integer.
This is necessary to fix an integer overflow problem that can be
reproduced easily now that we use the counter to track blocks that are
assigned to the inode in memory but not on disk. This includes actual
delalloc reservations as well as real extents in the COW fork that
are waiting to be remapped into the data fork.
These 'delayed mapping' blocks can easily exceed 2^32 blocks if one
creates a very large sparse file of size approximately 2^33 bytes with
one byte written every 2^23 bytes, sets a very large COW extent size
hint of 2^23 blocks, reflinks the first file into a second file, and
then writes a single byte every 2^23 blocks in the original file.
When this happens, we'll try to create approximately 1024 2^23 extent
reservations in the COW fork, which will overflow the counter and cause
problems.
Note that on x64 we end up filling a 4-byte gap in the structure so this
doesn't increase the incore size.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Widen the incore quota transaction delta structure to treat block
counters as 64-bit integers. This is a necessary addition so that we
can widen the i_delayed_blks counter to be a 64-bit integer.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Dave Chinner noticed that xfs_file_dio_aio_write returns EAGAIN without
dropping the IOLOCK when its deciding not to wait, which means that we
leak the IOLOCK there. Since we now make unaligned directio always
wait, we have the opportunity to bail out before trying to take the
lock, which should reduce the overhead of this never-gonna-work case
considerably while also solving the dropped lock problem.
Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Block allocation requires a permanent transaction for deferred AGFL
frees. Add an assert in the block allocation path to make explicit and
obvious to future callers the requirement of a transaction with a
permanent reservation.
Reported-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: split this out from the previous patch per hch request]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The growdata transaction is used by growfs operations to increase
the data size of the filesystem. Part of this sequence involves
extending the size of the last preexisting AG in the fs, if
necessary. This is implemented by freeing the newly available
physical range to the AG.
tr_growdata is not a permanent transaction, however, and block
allocation transactions must be permanent to handle deferred frees
of AGFL blocks. If the grow operation extends an existing AG that
requires AGFL fixing, assert failures occur due to a populated dfops
list on a non-permanent transaction and the AGFL free does not
occur. This is reproduced (rarely) by xfs/104.
Change tr_growdata to a permanent transaction with a default log
count. This increases initial transaction reservation size, but
growfs is an infrequent and non-performance critical operation and
so should have minimal impact.
Reported-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: add a comment to the assert]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
It's possible for pagecache writeback to split up a large amount of work
into smaller pieces for throttling purposes or to reduce the amount of
time a writeback operation is pending. Whatever the reason, XFS can end
up with a bunch of IO completions that call for the same operation to be
performed on a contiguous extent mapping. Since mappings are extent
based in XFS, we'd prefer to run fewer transactions when we can.
When we're processing an ioend on the list of io completions, check to
see if the next items on the list are both adjacent and of the same
type. If so, we can merge the completions to reduce transaction
overhead.
On fast storage this doesn't seem to make much of a difference in
performance, though the number of transactions for an overnight xfstests
run seems to drop by ~5%.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Now that we're no longer using m_data_workqueue, remove it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When scheduling writeback of dirty file data in the page cache, XFS uses
IO completion workqueue items to ensure that filesystem metadata only
updates after the write completes successfully. This is essential for
converting unwritten extents to real extents at the right time and
performing COW remappings.
Unfortunately, XFS queues each IO completion work item to an unbounded
workqueue, which means that the kernel can spawn dozens of threads to
try to handle the items quickly. These threads need to take the ILOCK
to update file metadata, which results in heavy ILOCK contention if a
large number of the work items target a single file, which is
inefficient.
Worse yet, the writeback completion threads get stuck waiting for the
ILOCK while holding transaction reservations, which can use up all
available log reservation space. When that happens, metadata updates to
other parts of the filesystem grind to a halt, even if the filesystem
could otherwise have handled it.
Even worse, if one of the things grinding to a halt happens to be a
thread in the middle of a defer-ops finish holding the same ILOCK and
trying to obtain more log reservation having exhausted the permanent
reservation, we now have an ABBA deadlock - writeback completion has a
transaction reserved and wants the ILOCK, and someone else has the ILOCK
and wants a transaction reservation.
Therefore, we create a per-inode writeback io completion queue + work
item. When writeback finishes, it can add the ioend to the per-inode
queue and let the single worker item process that queue. This
dramatically cuts down on the number of kworkers and ILOCK contention in
the system, and seems to have eliminated an occasional deadlock I was
seeing while running generic/476.
Testing with a program that simulates a heavy random-write workload to a
single file demonstrates that the number of kworkers drops from
approximately 120 threads per file to 1, without dramatically changing
write bandwidth or pagecache access latency.
Note that we leave the xfs-conv workqueue's max_active alone because we
still want to be able to run ioend processing for as many inodes as the
system can handle.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Skip cross-referencing with a btree if the health report tells us that
it's known to be bad. This should reduce the dmesg spew considerably.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Now that we have the ability to track sick metadata in-core, make scrub
and repair update those health assessments after doing work.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Now that we no longer memset the scrub context, we can move the
already_fixed variable into the scrub context's state flags instead of
passing around pointers to separate stack variables.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Combine all the boolean state flags in struct xfs_scrub into a single
unsigned int, because we're going to be adding more state flags soon.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
It's a little silly how the memset in scrub context initialization
forces us to declare stack variables to preserve context variables
across a retry. Since the teardown functions already null out most of
the ephemeral state (buffer pointers, btree cursors, etc.), just skip
the memset and move the initialization as needed.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Use space in the bulkstat ioctl structure to report any problems
observed with the inode.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Use the AG geometry info ioctl to report health status too.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Use our newly expanded geometry structure to report the overall fs and
realtime health status.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add a new ioctl to describe an allocation group's geometry.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Unfortunately, the V4 XFS_IOC_FSGEOMETRY structure is out of space so we
can't just add a new field to it. Hence we need to bump the definition
to V5 and and treat the V4 ioctl and structure similar to v1 to v3.
While doing this, clean up all the definitions associated with the
XFS_IOC_FSGEOMETRY ioctl.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: forward port to 5.1, expand structure size to 256 bytes]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
If we know the filesystem metadata isn't healthy during unmount, we want
to encourage the administrator to run xfs_repair right away. We can't
do this if BAD_SUMMARY will cause an unclean log unmount to force
summary recalculation, so turn it off if the fs is bad.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Replace the BAD_SUMMARY mount flag with calls to the equivalent health
tracking code.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add the necessary in-core metadata fields to keep track of which parts
of the filesystem have been observed and which parts were observed to be
unhealthy, and print a warning at unmount time if we have unfixed
problems.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
This patch tries to address two problems:
1) return @minlen we used to trim to
user space.
2) return EINVAL if granularity is larger than
avg size, even most of cases, granularity is small(4K),
but if devices return a lager granularity for some reaons
(testing, bugs etc), fstrim should return failure directly.
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The block allocation AG selection code has parameters that allow a
caller to perform multiple allocations from a single AG and
transaction (under certain conditions). The parameters specify the
total block allocation count required by the transaction and the AG
selection code selects and locks an AG that will be able to satisfy
the overall requirement. If the available block accounting
calculation turns out to be inaccurate and a subsequent allocation
call fails with -ENOSPC, the resulting transaction cancel leads to
filesystem shutdown because the transaction is dirty.
This exact problem can be reproduced with a highly parallel space
consumer and fsstress workload running long enough to a large
filesystem against -ENOSPC conditions. A bmbt block allocation
request made for inode extent to bmap format conversion after an
extent allocation is expected to be satisfied by the same AG and the
same transaction as the extent allocation. The bmbt block allocation
fails, however, because the block availability of the AG has changed
since the AG was selected (outside of the blocks used for the extent
itself).
The inconsistent block availability calculation is caused by the
deferred block freeing behavior of the AGFL. This immediately
removes extra blocks from the AGFL to free up AGFL slots, but rather
than immediately freeing such blocks as was done in the past, the
block free is deferred such that said blocks are not available for
allocation until the current transaction commits. The AG selection
logic currently considers all AGFL blocks as available and executes
shortly before any extra AGFL blocks are freed. This means the block
availability of the current AG can change before the first
allocation even occurs, but in practice a failure is more likely to
manifest via a subsequent allocation because extent allocation
usually has a contiguity requirement larger than a single block that
can't be satisfied from the AGFL.
In general, XFS prefers operational robustness to absolute
allocation efficiency. In other words, we prefer to return -ENOSPC
slightly earlier at the expense of not being able to allocate every
last block in an AG to avoid this kind of problem. As such, update
the AG block availability calculation to consider extra AGFL blocks
as unavailable since they are immediately removed following the
calculation and will not become available until the current
transaction commits.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
If xfs_iflush_cluster() fails due to corruption, the error path
issues a shutdown and simulates an I/O completion to release the
buffer. This code has a couple small problems. First, the shutdown
sequence can issue a synchronous log force, which is unsafe to do
with buffer locks held. Second, the simulated I/O completion does not
guarantee the buffer is async and thus is unlocked and released.
For example, if the last operation on the buffer was a read off disk
prior to the corruption event, XBF_ASYNC is not set and the buffer
is left locked and held upon return. This results in a memory leak
as shown by the following message on module unload:
BUG xfs_buf (...): Objects remaining in xfs_buf on __kmem_cache_shutdown()
Fix both of these problems by setting XBF_ASYNC on the buffer prior
to the simulated I/O error and performing the shutdown immediately
after ioend processing when the buffer has been released.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
XFS shutdown deadlocks have been reproduced by fstest generic/475.
The deadlock signature involves log I/O completion running error
handling to abort logged items and waiting for an inode cluster
buffer lock in the buffer item unpin handler. The buffer lock is
held by xfsaild attempting to flush an inode. The buffer happens to
be pinned and so xfs_iflush() triggers an async log force to begin
work required to get it unpinned. The log force is blocked waiting
on the commit completion, which never occurs and thus leaves the
filesystem deadlocked.
The root problem is that aborted log I/O completion pots commit
completion behind callback completion, which is unexpected for async
log forces. Under normal running conditions, an async log force
returns to the caller once the CIL ctx has been formatted/submitted
and the commit completion event triggered at the tail end of
xlog_cil_push(). If the filesystem has shutdown, however, we rely on
xlog_cil_committed() to trigger the completion event and it happens
to do so after running log item unpin callbacks. This makes it
unsafe to invoke an async log force from contexts that hold locks
that might also be required in log completion processing.
To address this problem, wake commit completion waiters before
aborting log items in the log I/O completion handler. This ensures
that an async log force will not deadlock on held locks if the
filesystem happens to shutdown. Note that it is still unsafe to
issue a sync log force while holding such locks because a sync log
force explicitly waits on the force completion, which occurs after
log I/O completion processing.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The xfs_buf_log_item ->iop_unlock() callback asserts that the buffer
is unlocked when either non-stale or aborted. This assert occurs
after the bli refcount has been dropped and the log item potentially
freed. The aborted check is thus a potential use after free. This
problem has been reproduced with KASAN enabled via generic/475.
Fix up xfs_buf_item_unlock() to query aborted state before the bli
reference is dropped to prevent a potential use after free.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Currently support for 64-bit sector_t and blkcnt_t is optional on 32-bit
architectures. These types are required to support block device and/or
file sizes larger than 2 TiB, and have generally defaulted to on for
a long time. Enabling the option only increases the i386 tinyconfig
size by 145 bytes, and many data structures already always use
64-bit values for their in-core and on-disk data structures anyway,
so there should not be a large change in dynamic memory usage either.
Dropping this option removes a somewhat weird non-default config that
has cause various bugs or compiler warnings when actually used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
XFS applies more strict serialization constraints to unaligned
direct writes to accommodate things like direct I/O layer zeroing,
unwritten extent conversion, etc. Unaligned submissions acquire the
exclusive iolock and wait for in-flight dio to complete to ensure
multiple submissions do not race on the same block and cause data
corruption.
This generally works in the case of an aligned dio followed by an
unaligned dio, but the serialization is lost if I/Os occur in the
opposite order. If an unaligned write is submitted first and
immediately followed by an overlapping, aligned write, the latter
submits without the typical unaligned serialization barriers because
there is no indication of an unaligned dio still in-flight. This can
lead to unpredictable results.
To provide proper unaligned dio serialization, require that such
direct writes are always the only dio allowed in-flight at one time
for a particular inode. We already acquire the exclusive iolock and
drain pending dio before submitting the unaligned dio. Wait once
more after the dio submission to hold the iolock across the I/O and
prevent further submissions until the unaligned I/O completes. This
is heavy handed, but consistent with the current pre-submission
serialization for unaligned direct writes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The xfs fstrim implementation uses the free space btrees to find free
space that can be discarded. If we haven't recovered the log, the bnobt
will be stale and we absolutely *cannot* use stale metadata to zap the
underlying storage.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Always init the tp/ip fields of bma in xfs_bmapi_write so that the
bmapi_finish at the bottom never trips over null transaction or inode
pointers.
Coverity-id: 1443964
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In xchk_btree_check_owner, we can be passed a null buffer pointer. This
should only happen for the root of a root-in-inode btree type, but we
should program defensively in case the btree cursor state ever gets
screwed up and we get a null buffer anyway.
Coverity-id: 1438713
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Make sure scrub's dabtree iterator function checks that we're not
going deeper in the stack than our cursor permits.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
We've had rather rare reports of bmap btree block corruption where
the bmap root block has a level count of zero. The root cause of the
corruption is so far unknown. We do have verifier checks to detect
this form of on-disk corruption, but this doesn't cover a memory
corruption variant of the problem. The latter is a reasonable
possibility because the root block is part of the inode fork and can
reside in-core for some time before inode extents are read.
If this occurs, it leads to a system crash such as the following:
BUG: unable to handle kernel paging request at ffffffff00000221
PF error: [normal kernel read fault]
...
RIP: 0010:xfs_trans_brelse+0xf/0x200 [xfs]
...
Call Trace:
xfs_iread_extents+0x379/0x540 [xfs]
xfs_file_iomap_begin_delay+0x11a/0xb40 [xfs]
? xfs_attr_get+0xd1/0x120 [xfs]
? iomap_write_begin.constprop.40+0x2d0/0x2d0
xfs_file_iomap_begin+0x4c4/0x6d0 [xfs]
? __vfs_getxattr+0x53/0x70
? iomap_write_begin.constprop.40+0x2d0/0x2d0
iomap_apply+0x63/0x130
? iomap_write_begin.constprop.40+0x2d0/0x2d0
iomap_file_buffered_write+0x62/0x90
? iomap_write_begin.constprop.40+0x2d0/0x2d0
xfs_file_buffered_aio_write+0xe4/0x3b0 [xfs]
__vfs_write+0x150/0x1b0
vfs_write+0xba/0x1c0
ksys_pwrite64+0x64/0xa0
do_syscall_64+0x5a/0x1d0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The crash occurs because xfs_iread_extents() attempts to release an
uninitialized buffer pointer as the level == 0 value prevented the
buffer from ever being allocated or read. Change the level > 0
assert to an explicit error check in xfs_iread_extents() to avoid
crashing the kernel in the event of localized, in-core inode
corruption.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
- Fix some clang/smatch/sparse warnings about uninitialized variables.
- Clean up some typedef usage.
-----BEGIN PGP SIGNATURE-----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=YIiT
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.1-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs cleanups from Darrick Wong:
"Here's a few more cleanups that trickled in for the merge window.
It's all fixes for static checker complaints and slowly unwinding
typedef usage. The four patches here have gone through a few days
worth of fstest runs with no new problems observed.
Summary:
- Fix some clang/smatch/sparse warnings about uninitialized
variables.
- Clean up some typedef usage"
* tag 'xfs-5.1-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: clean up xfs_dir2_leaf_addname
xfs: zero initialize highstale and lowstale in xfs_dir2_leaf_addname
xfs: clean up xfs_dir2_leafn_add
xfs: Zero initialize highstale and lowstale in xfs_dir2_leafn_add
Remove typedefs and consolidate local variable initialization.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Smatch complains about the following:
fs/xfs/libxfs/xfs_dir2_leaf.c:848 xfs_dir2_leaf_addname() error:
uninitialized symbol 'lowstale'.
fs/xfs/libxfs/xfs_dir2_leaf.c:849 xfs_dir2_leaf_addname() error:
uninitialized symbol 'highstale'.
I don't think there's any incorrect behavior associated with the
uninitialized variable, but as the author of the previous zero-init
patch points out, it's best not to be passing around pointers to
uninitialized stack areas.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Remove typedefs and consolidate local variable initialization.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
When building with -Wsometimes-uninitialized, Clang warns:
fs/xfs/libxfs/xfs_dir2_node.c:481:6: warning: variable 'lowstale' is
used uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]
fs/xfs/libxfs/xfs_dir2_node.c:481:6: warning: variable 'highstale' is
used uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]
While it isn't technically wrong, it isn't a problem in practice because
highstale and lowstale are only initialized in xfs_dir2_leafn_add when
compact is not zero then they are passed to xfs_dir3_leaf_find_entry,
where they are initialized before use when compact is zero. Regardless,
it's better not to be passing around uninitialized stack memory so zero
initialize these variables, which silences this warning.
Link: https://github.com/ClangBuiltLinux/linux/issues/393
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-----BEGIN PGP SIGNATURE-----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=VBaU
-----END PGP SIGNATURE-----
Merge tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
"Not a huge amount of changes in this round, the biggest one is that we
finally have Mings multi-page bvec support merged. Apart from that,
this pull request contains:
- Small series that avoids quiescing the queue for sysfs changes that
match what we currently have (Aleksei)
- Series of bcache fixes (via Coly)
- Series of lightnvm fixes (via Mathias)
- NVMe pull request from Christoph. Nothing major, just SPDX/license
cleanups, RR mp policy (Hannes), and little fixes (Bart,
Chaitanya).
- BFQ series (Paolo)
- Save blk-mq cpu -> hw queue mapping, removing a pointer indirection
for the fast path (Jianchao)
- fops->iopoll() added for async IO polling, this is a feature that
the upcoming io_uring interface will use (Christoph, me)
- Partition scan loop fixes (Dongli)
- mtip32xx conversion from managed resource API (Christoph)
- cdrom registration race fix (Guenter)
- MD pull from Song, two minor fixes.
- Various documentation fixes (Marcos)
- Multi-page bvec feature. This brings a lot of nice improvements
with it, like more efficient splitting, larger IOs can be supported
without growing the bvec table size, and so on. (Ming)
- Various little fixes to core and drivers"
* tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block: (117 commits)
block: fix updating bio's front segment size
block: Replace function name in string with __func__
nbd: propagate genlmsg_reply return code
floppy: remove set but not used variable 'q'
null_blk: fix checking for REQ_FUA
block: fix NULL pointer dereference in register_disk
fs: fix guard_bio_eod to check for real EOD errors
blk-mq: use HCTX_TYPE_DEFAULT but not 0 to index blk_mq_tag_set->map
block: optimize bvec iteration in bvec_iter_advance
block: introduce mp_bvec_for_each_page() for iterating over page
block: optimize blk_bio_segment_split for single-page bvec
block: optimize __blk_segment_map_sg() for single-page bvec
block: introduce bvec_nth_page()
iomap: wire up the iopoll method
block: add bio_set_polled() helper
block: wire up block device iopoll method
fs: add an iopoll method to struct file_operations
loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part()
loop: do not print warn message if partition scan is successful
block: bounce: make sure that bvec table is updated
...
statx(2) notes that any attribute that is not indicated as supported by
stx_attributes_mask has no usable value. Commit 5f955f26f3 ("xfs: report
crtime and attribute flags to statx") added support for informing userspace
of extra file attributes but forgot to list these flags as supported
making reporting them rather useless for the pedantic userspace author.
$ git describe --contains 5f955f26f3
v4.11-rc6~5^2^2~2
Fixes: 5f955f26f3 ("xfs: report crtime and attribute flags to statx")
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: add a comment reminding people to keep attributes_mask up to date]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Fix a backwards endian conversion of a constant.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
smatch complained about some uninitialized error returns, so fix those.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Rework the data flow in xfs_file_iomap_begin where we decide if we have
to break shared extents.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Don't pass raw iomap flags to xfs_reflink_allocate_cow; signal our
intention with a boolean argument.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Store the request queue the last bio was submitted to in the iocb
private data in addition to the cookie so that we find the right block
device. Also refactor the common direct I/O bio submission code into a
nice little helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Modified to use bio_set_polled().
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A previous commit removed the initialization of variable 'error' to zero,
and can cause a bogus error return. This occurs when error contains a
non-zero garbage value and the call to xchk_should_terminate detects a
pending fatal signal and checks for a zero error before setting it
to -EAGAIN. Fix the issue by initializing error to zero.
Fixes: b9454fe056 ("xfs: clean up the inode cluster checking in the inobt scrub")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Add a mode where XFS never overwrites existing blocks in place. This
is to aid debugging our COW code, and also put infatructure in place
for things like possible future support for zoned block devices, which
can't support overwrites.
This mode is enabled globally by doing a:
echo 1 > /sys/fs/xfs/debug/always_cow
Note that the parameter is global to allow running all tests in xfstests
easily in this mode, which would not easily be possible with a per-fs
sysfs file.
In always_cow mode persistent preallocations are disabled, and fallocate
will fail when called with a 0 mode (with our without
FALLOC_FL_KEEP_SIZE), and not create unwritten extent for zeroed space
when called with FALLOC_FL_ZERO_RANGE or FALLOC_FL_UNSHARE_RANGE.
There are a few interesting xfstests failures when run in always_cow
mode:
- generic/392 fails because the bytes used in the file used to test
hole punch recovery are less after the log replay. This is
because the blocks written and then punched out are only freed
with a delay due to the logging mechanism.
- xfs/170 will fail as the already fragile file streams mechanism
doesn't seem to interact well with the COW allocator
- xfs/180 xfs/182 xfs/192 xfs/198 xfs/204 and xfs/208 will claim
the file system is badly fragmented, but there is not much we
can do to avoid that when always writing out of place
- xfs/205 fails because overwriting a file in always_cow mode
will require new space allocation and the assumption in the
test thus don't work anymore.
- xfs/326 fails to modify the file at all in always_cow mode after
injecting the refcount error, leading to an unexpected md5sum
after the remount, but that again is expected
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
No user of it in the iomap code at the moment, but we should not
actively report wrong information if we can trivially get it right.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
If we have racing buffered and direct I/O COW fork extents under
writeback can have been moved to the data fork by the time we call
xfs_reflink_convert_cow from xfs_submit_ioend. This would be mostly
harmless as the block numbers don't change by this move, except for
the fact that xfs_bmapi_write will crash or trigger asserts when
not finding existing extents, even despite trying to paper over this
with the XFS_BMAPI_CONVERT_ONLY flag.
Instead of special casing non-transaction conversions in the already
way too complicated xfs_bmapi_write just add a new helper for the much
simpler non-transactional COW fork case, which simplify ignores not
found extents.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Besides simplifying the code a bit this allows to actually implement
the behavior of using COW preallocation for non-COW data mentioned
in the current comments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This only matters if we want to write data through the COW fork that is
not actually an overwrite of existing data. Reasons for that are
speculative COW fork allocations using the cowextsize, or a mode where
we always write through the COW fork. Currently both can't actually
happen, but I plan to enable them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
While using delalloc for extsize hints is generally a good idea, the
current code that does so only for COW doesn't help us much and creates
a lot of special cases. Switch it to use real allocations like we
do for direct I/O.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We speculatively allocate extents in the COW fork to reduce
fragmentation. But when we write data into such COW fork blocks that
do now shadow an allocation in the data fork SEEK_DATA will not
correctly report it, as it only looks at the data fork extents.
The only reason why that hasn't been an issue so far is because
we even use these speculative COW fork preallocations over holes in
the data fork at all for buffered writes, and blocks in the COW
fork that are written by direct writes are moved into the data
fork immediately at I/O completion time.
Add a new set of iomap_ops for SEEK_HOLE/SEEK_DATA which looks into
both the COW and data fork, and reports all COW extents as unwritten
to the iomap layer. While this isn't strictly true for COW fork
extents that were already converted to real extents, the practical
semantics that you can't read data from them until they are moved
into the data fork are very similar, and this will force the iomap
layer into probing the extents for actually present data.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move checking for invalid zero blocks and setting of various iomap flags
into this helper. Also make it deal with "raw" delalloc extents to
avoid clutter in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Create a separate magic16 check function so that we don't run afoul of
static checkers.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
While we can only truncate a block under the page lock for the current
page, there is no high-level synchronization for moving extents from the
COW to the data fork. This means that for example we can have another
thread doing a direct I/O completion that moves extents from the COW to
the data fork race with writeback. While this race is very hard to hit
the always_cow seems to reproduce it reasonably well, and it also exists
without that. Because of that there is a chance that a delalloc
conversion for the COW fork might not find any extents to convert. In
that case we should retry the whole block lookup and now find the blocks
in the data fork.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that we properly handle the race with truncate in the delalloc
allocator there is no need to short cut this exceptional case earlier
on.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This function is a small wrapper only used by the writeback code, so
move it together with the writeback code and simplify it down to the
glorified do { } while loop that is now is.
A few bits intentionally got lost here: no need to call xfs_qm_dqattach
because quotas are always attached when we create the delalloc
reservation, and no need for the imap->br_startblock == 0 check given
that xfs_bmapi_convert_delalloc already has a WARN_ON_ONCE for exactly
that condition.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This way we can actually count how many bytes got converted and how many
calls we need, unlike in the caller which doesn't have the detailed
view.
Note that this includes a slight change in behavior as the
xs_xstrat_quick is now bumped for every allocation instead of just the
one covering the requested writeback offset, which makes a lot more
sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
No need to deal with the transaction and the inode locking in the
caller. Note that we also switch to passing whichfork as the second
paramter, matching what most related functions do.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Delalloc conversion has traditionally been part of our function to
allocate blocks on disk (first xfs_bmapi, then xfs_bmapi_write), but
delalloc conversion is a little special as we really do not want
to allocate blocks over holes, for which we don't have reservations.
Split the delalloc conversions into a separate helper to keep the
code simple and structured.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We want to be able to reuse them for the upcoming dedidcated delalloc
convert routine.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move boilerplate code from the callers into xfs_bmap_btree_to_extents:
- exit early without failure if we don't need to convert to the
extent format
- assert that we have a btree cursor
- don't reinitialize the passed in logflags argument
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We already ensure all data fits into s_maxbytes in the write / fault
path. The only reason we have them here is that they were copy and
pasted from xfs_bmapi_read when we stopped using that function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The io_type field contains what is basically a summary of information
from the inode fork and the imap. But we can just as easily use that
information directly, simplifying a few bits here and there and
improving the trace points.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-----BEGIN PGP SIGNATURE-----
iQFRBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxgqNUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGwsoH+OVXu0NQofwTvVru
8lgF3BSDG2mhf7mxbBBlBizGVy9jnjRNGCFMC+Jq8IwiFLwprja/G27kaDTkpuF1
PHC3yfjKvjTeUP5aNdHlmxv6j1sSJfZl0y46DQal4UeTG/Giq8TFTi+Tbz7Wb/WV
yCx4Lr8okAwTuNhnL8ojUCVIpd3c8QsyR9v6nEQ14Mj+MvEbokyTkMJV0bzOrM38
JOB+/X1XY4JPZ6o3MoXrBca3bxbAJzMneq+9CWw1U5eiIG3msg4a+Ua3++RQMDNr
8BP0yCZ6wo32S8uu0PI6HrZaBnLYi5g9Wh7Q7yc0mn1Uh1zWFykA6TtqK90agJeR
A6Ktjw==
=scY4
-----END PGP SIGNATURE-----
Merge tag 'v5.0-rc6' into for-5.1/block
Pull in 5.0-rc6 to avoid a dumb merge conflict with fs/iomap.c.
This is needed since io_uring is now based on the block branch,
to avoid a conflict between the multi-page bvecs and the bits
of io_uring that touch the core block parts.
* tag 'v5.0-rc6': (525 commits)
Linux 5.0-rc6
x86/mm: Make set_pmd_at() paravirt aware
MAINTAINERS: Update the ocores i2c bus driver maintainer, etc
blk-mq: remove duplicated definition of blk_mq_freeze_queue
Blk-iolatency: warn on negative inflight IO counter
blk-iolatency: fix IO hang due to negative inflight counter
MAINTAINERS: unify reference to xen-devel list
x86/mm/cpa: Fix set_mce_nospec()
futex: Handle early deadlock return correctly
futex: Fix barrier comment
net: dsa: b53: Fix for failure when irq is not defined in dt
blktrace: Show requests without sector
mips: cm: reprime error cause
mips: loongson64: remove unreachable(), fix loongson_poweroff().
sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()
geneve: should not call rt6_lookup() when ipv6 was disabled
KVM: nVMX: unconditionally cancel preemption timer in free_nested (CVE-2019-7221)
KVM: x86: work around leak of uninitialized stack contents (CVE-2019-7222)
kvm: fix kvm_ioctl_create_device() reference counting (CVE-2019-6974)
signal: Better detection of synchronous signals
...
This patch pulls the trigger for multi-page bvecs.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch introduces one extra iterator variable to bio_for_each_segment_all(),
then we can allow bio_for_each_segment_all() to iterate over multi-page bvec.
Given it is just one mechannical & simple change on all bio_for_each_segment_all()
users, this patch does tree-wide change in one single patch, so that we can
avoid to use a temporary helper for this conversion.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When XFS creates an O_TMPFILE file, the inode is created with nlink = 1,
put on the unlinked list, and then the VFS sets nlink = 0 in d_tmpfile.
If we crash before anything logs the inode (it's dirty incore but the
vfs doesn't tell us it's dirty so we never log that change), the iunlink
processing part of recovery will then explode with a pile of:
XFS: Assertion failed: VFS_I(ip)->i_nlink == 0, file:
fs/xfs/xfs_log_recover.c, line: 5072
Worse yet, since nlink is nonzero, the inodes also don't get cleaned up
and they just leak until the next xfs_repair run.
Therefore, change xfs_iunlink to require that inodes being put on the
unlinked list have nlink == 0, change the tmpfile callers to instantiate
nodes that way, and set the nlink to 1 just prior to calling d_tmpfile.
Fix the comment for xfs_iunlink while we're at it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Log recovery frees all the inodes stored in the unlinked list, which can
cause expansion of the free inode btree. The ifree code skips block
reservations if it thinks there's a per-AG space reservation, but we
don't set up the reservation until after log recovery, which means that
a finobt expansion blows up in xfs_trans_mod_sb when we exceed the
transaction's block reservation.
To fix this, we set the "no finobt reservation" flag to true when we
create the xfs_mount and only set it to false if we confirm that every
AG had enough free space to put aside for the finobt.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Rename this flag variable to imply more strongly that it's related to
the free inode btree (finobt) operation. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
For VFS listxattr calls, xfs_xattr_put_listent calls
__xfs_xattr_put_listent twice if it sees an attribute
"trusted.SGI_ACL_FILE": once for that name, and again for
"system.posix_acl_access". Unfortunately, if we happen to run out of
buffer space while emitting the first name, we set count to -1 (so that
we can feed ERANGE to the caller). The second invocation doesn't check that
the context parameters make sense and overwrites the byte before the
buffer, triggering a KASAN report:
==================================================================
BUG: KASAN: slab-out-of-bounds in strncpy+0xb3/0xd0
Write of size 1 at addr ffff88807fbd317f by task syz/1113
CPU: 3 PID: 1113 Comm: syz Not tainted 5.0.0-rc6-xfsx #rc6
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
dump_stack+0xcc/0x180
print_address_description+0x6c/0x23c
kasan_report.cold.3+0x1c/0x35
strncpy+0xb3/0xd0
__xfs_xattr_put_listent+0x1a9/0x2c0 [xfs]
xfs_attr_list_int_ilocked+0x11af/0x1800 [xfs]
xfs_attr_list_int+0x20c/0x2e0 [xfs]
xfs_vn_listxattr+0x225/0x320 [xfs]
listxattr+0x11f/0x1b0
path_listxattr+0xbd/0x130
do_syscall_64+0x139/0x560
While we're at it we add an assert to the other put_listent to avoid
this sort of thing ever happening to the attrlist_by_handle code.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The v5 superblock format added various metadata fields (such as crc,
metadata lsn, owner uuid, etc.) to v4 metadata headers or created
new v5 headers for blocks where no such headers existed on v4. Where
v4 headers did exist, the v5 structures are careful to place v4
metadata at the original location. For example, the magic value is
expected to be at the same location in certain blocks to facilitate
version detection.
While failure of this invariant is likely to cause severe and
obvious problems at runtime, we can detect this condition at compile
time via the more recently added on-disk format check
infrastructure. Since there is no runtime cost, add some offset
checks that start with v5 structure definitions, traverse down to
the first bit of common metadata with v4 and ensure that common
metadata is at the expected offset. Note that we don't care about
blocks which had no v4 header because there is no common metadata in
those cases. No functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that we encode block magic numbers in all the buffer ops, use that
for block type detection in the ag header repair code instead of
encoding magics directly in the repair code.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add dquot magic numbers to the buffer ops type, in case we ever want to
use them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Use xfs_verify_magic to check the magic numbers of inodes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
With the verifier magic value helper in place, we've left a bit more
duplicate code across the verifiers that involve struct
xfs_da3_blkinfo. This includes the da node, xattr leaf and dir leaf
verifiers, all of which perform similar checks for v4 and v5
filesystems.
Create a common helper to verify an xfs_da3_blkinfo structure,
taking care to only access v5 fields where appropriate, and refactor
the aforementioned verifiers to use the helper. No functional
changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Most buffer verifiers have hardcoded magic value checks
conditionalized on the version of the filesystem. The magic value
field of the verifier structure facilitates abstraction of some of
this code. Populate the ->magic field of various verifiers to take
advantage of this abstraction. No functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The dir2 leaf verifiers share the same underlying structure
verification code, but implement six accessor functions to multiplex
the code across the two verifiers. Further, the magic value isn't
sufficiently abstracted such that the common helper has to manually
fix up the magic from the caller on v5 filesystems.
Use the magic field in the verifier structure to eliminate the
duplicate code and clean this all up. No functional change.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The allocation btree verifiers share code that is unable to detect
cross-tree magic value corruptions such as a bnobt block with a
cntbt magic value. Populate the b_ops->magic field of the associated
verifier structures such that the structure verifier can check the
magic value against the expected value based on tree type.
The btree level check requires knowledge of the tree type to
determine the appropriate maximum value. This was previously part of
the hardcoded magic value checks. With that code removed, peek at
the first magic value in the verifier to determine the expected tree
type of the current block.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Similar to the inode btree verifier, the same allocation btree
verifier structure is shared between the by-bno (bnobt) and by-size
(cntbt) btrees. This prevents the ability to distinguish magic
values between them. Separate the verifier into two, one for each
tree, and assign them appropriately. No functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The inode btree verifier code is shared between the inode btree and
free inode btree because the underlying metadata formats are
essentially equivalent. A side effect of this is that the verifier
cannot determine whether a particular btree block should have an
inobt or finobt magic value.
This logic allows an unfortunate xfs_repair bug to escape detection
where certain level > 0 nodes of the finobt are stamped with inobt
magic by xfs_repair finobt reconstruction. This is fortunately not a
severe problem since the inode btree magic values do not contribute
to any changes in kernel behavior, but we do need a means to detect
and prevent this problem in the future.
Add a field to xfs_buf_ops to store the v4 and v5 superblock magic
values expected by a particular verifier. Add a helper to check an
on-disk magic value against the value expected by the verifier. Call
the helper from the shared [f]inobt verifier code for magic value
verification. This ensures that the inode btree blocks each have the
appropriate magic value based on specific tree type and superblock
version.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The inobt verifier is reused for the inobt and finobt, which
prevents the ability to distinguish between magic values on a
per-tree basis. Create a separate finobt structure in preparation
for changes to enforce the appropriate magic value for the
associated tree. This patch has no functional change.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Most verifiers that check on-disk magic values convert the CPU
endian magic value constant to disk endian to facilitate compile
time optimization of the byte swap and reduce the need for runtime
byte swaps in buffer verifiers. Several buffer verifiers do not
follow this pattern. Update those verifiers for consistency.
Also fix up a random typo in the inode readahead verifier name.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Improve the documentation around xfs_buf_ensure_ops, which is the
function that is responsible for cleaning up the b_ops state of buffers
that go through xrep_findroot_block but don't match anything. Rename
the function to xfs_buf_reverify.
[darrick: this started off as bfoster mods of a previous patch of mine,
but the renaming part is now this separate patch.]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Use a rhashtable to cache the unlinked list incore. This should speed
up unlinked processing considerably when there are a lot of inodes on
the unlinked list because iunlink_remove no longer has to traverse an
entire bucket list to find which inode points to the one being removed.
The incore list structure records "X.next_unlinked = Y" relations, with
the rhashtable using Y to index the records. This makes finding the
inode X that points to a inode Y very quick. If our cache fails to find
anything we can always fall back on the old method.
FWIW this drastically reduces the amount of time it takes to remove
inodes from the unlinked list. I wrote a program to open a lot of
O_TMPFILE files and then close them in the same order, which takes
a very long time if we have to traverse the unlinked lists. With the
ptach, I see:
+ /d/t/tmpfile/tmpfile
Opened 193531 files in 6.33s.
Closed 193531 files in 5.86s
real 0m12.192s
user 0m0.064s
sys 0m11.619s
+ cd /
+ umount /mnt
real 0m0.050s
user 0m0.004s
sys 0m0.030s
And without the patch:
+ /d/t/tmpfile/tmpfile
Opened 193588 files in 6.35s.
Closed 193588 files in 751.61s
real 12m38.853s
user 0m0.084s
sys 12m34.470s
+ cd /
+ umount /mnt
real 0m0.086s
user 0m0.000s
sys 0m0.060s
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add tracepoints so we can associate high level operations with low level
updates. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In xfs_iunlink_remove we have two identical calls to
xfs_iunlink_update_inode, so move it out of the if statement to simplify
the code some more.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
There's a loop that searches an unlinked bucket list to find the inode
that points to a given inode. Hoist this into a separate function;
later we'll use our iunlink backref cache to bypass the slow list
operation. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Hoist the functions that update an inode's unlinked pointer updates into
a helper. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Strengthen our checking of the AGI unlinked pointers when we start to
use them for updating the metadata.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Split the AGI unlinked bucket updates into a separate function. No
functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add a new helper to check that a per-AG inode pointer is either null or
points somewhere valid within that AG.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fix some indentation issues with the iunlink functions and reorganize
the tops of the functions to be identical. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The writeback delalloc conversion code is racy with respect to
changes in the currently cached file mapping outside of the current
page. This is because the ilock is cycled between the time the
caller originally looked up the mapping and across each real
allocation of the provided file range. This code has collected
various hacks over the years to help combat the symptoms of these
races (i.e., truncate race detection, allocation into hole
detection, etc.), but none address the fundamental problem that the
imap may not be valid at allocation time.
Rather than continue to use race detection hacks, update writeback
delalloc conversion to a model that explicitly converts the delalloc
extent backing the current file offset being processed. The current
file offset is the only block we can trust to remain once the ilock
is dropped because any operation that can remove the block
(truncate, hole punch, etc.) must flush and discard pagecache pages
first.
Modify xfs_iomap_write_allocate() to use the xfs_bmapi_delalloc()
mechanism to request allocation of the entire delalloc extent
backing the current offset instead of assuming the extent passed by
the caller is unchanged. Record the range specified by the caller
and apply it to the resulting allocated extent so previous checks by
the caller for COW fork overlap are not lost. Finally, overload the
bmapi delalloc flag with the range reval flag behavior since this is
the only use case for both.
This ensures that writeback always picks up the correct
and current extent associated with the page, regardless of races
with other extent modifying operations. If operating on a data fork
and the COW overlap state has changed since the ilock was cycled,
the caller revalidates against the COW fork sequence number before
using the imap for the next block.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The writeback delalloc conversion code is racy with respect to
changes in the currently cached file mapping. This stems from the
fact that the bmapi allocation code requires a file range to
allocate and the writeback conversion code assumes the range of the
currently cached mapping is still valid with respect to the fork. It
may not be valid, however, because the ilock is cycled (potentially
multiple times) between the time the cached mapping was populated
and the delalloc conversion occurs.
To facilitate a solution to this problem, create a new
xfs_bmapi_delalloc() wrapper to xfs_bmapi_write() that takes a file
(FSB) offset and attempts to allocate whatever delalloc extent backs
the offset. Use a new bmapi flag to cause xfs_bmapi_write() to set
the range based on the extent backing the bno parameter unless bno
lands in a hole. If bno does land in a hole, fall back to the
current behavior (which may result in an error or quietly skipping
holes in the specified range depending on other parameters). This
patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that the cached writeback mapping is explicitly invalidated on
data fork changes, the EOF trimming band-aid is no longer necessary.
Remove xfs_trim_extent_eof() as well since it has no other users.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The writeback code caches the current extent mapping across multiple
xfs_do_writepage() calls to avoid repeated lookups for sequential
pages backed by the same extent. This is known to be slightly racy
with extent fork changes in certain difficult to reproduce
scenarios. The cached extent is trimmed to within EOF to help avoid
the most common vector for this problem via speculative
preallocation management, but this is a band-aid that does not
address the fundamental problem.
Now that we have an xfs_ifork sequence counter mechanism used to
facilitate COW writeback, we can use the same mechanism to validate
consistency between the data fork and cached writeback mappings. On
its face, this is somewhat of a big hammer approach because any
change to the data fork invalidates any mapping currently cached by
a writeback in progress regardless of whether the data fork change
overlaps with the range under writeback. In practice, however, the
impact of this approach is minimal in most cases.
First, data fork changes (delayed allocations) caused by sustained
sequential buffered writes are amortized across speculative
preallocations. This means that a cached mapping won't be
invalidated by each buffered write of a common file copy workload,
but rather only on less frequent allocation events. Second, the
extent tree is always entirely in-core so an additional lookup of a
usable extent mostly costs a shared ilock cycle and in-memory tree
lookup. This means that a cached mapping reval is relatively cheap
compared to the I/O itself. Third, spurious invalidations don't
impact ioend construction. This means that even if the same extent
is revalidated multiple times across multiple writepage instances,
we still construct and submit the same size ioend (and bio) if the
blocks are physically contiguous.
Update struct xfs_writepage_ctx with a new field to hold the
sequence number of the data fork associated with the currently
cached mapping. Check the wpc seqno against the data fork when the
mapping is validated and reestablish the mapping whenever the fork
has changed since the mapping was cached. This ensures that
writeback always uses a valid extent mapping and thus prevents lost
writebacks and stale delalloc block problems.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The sequence counter in the xfs_ifork structure is only updated on
COW forks. This is because the counter is currently only used to
optimize out repetitive COW fork checks at writeback time.
Tweak the extent code to update the seq counter regardless of the
fork type in preparation for using this counter on data forks as
well.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Currently we have a few PTAGs in place allowing us to transform a filesystem
error in a BUG() call. However, we don't have a panic tag for corrupt
metadata, so introduce XFS_PTAG_VERIFIER_ERROR so that the administrator can
use the fs.xfs.panic_mask sysctl knob to convert any error detected by buffer
verifiers into a kernel panic.
Signed-off-by: Marco Benatto <mbenatto@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
[darrick: light editing of commit message]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove duplicated include.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Check extended attribute entry names for invalid characters.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Check directory entry names for invalid characters.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Fix an off-by-one error in the realtime bitmap "is used" cross-reference
helper function if the realtime extent size is a single block.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Teach scrub to flag extent maps that exceed the range that can be mapped
with a xfs_dablk_t.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The extended attribute scrubber should abort the "read all attrs" loop
if there's a fatal signal pending on the process.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Move all the confusing dinode mapping code that's split between
xchk_iallocbt_check_cluster and xchk_iallocbt_check_cluster_ifree into
the first function so that it's clearer how we find the dinode for a
given inode.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Teach scrub how to handle the case that there are one or more inobt
records covering a given inode cluster. This fixes the operation on big
block filesystems (e.g. 64k blocks, 512 byte inodes).
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The code to check inobt records against inode clusters is a mess of
poorly named variables and unnecessary parameters. Clean the
unnecessary inode number parameters out of _check_cluster_freemask in
favor of computing them inside the function instead of making the caller
do it. In xchk_iallocbt_check_cluster, rename the variables to make it
more obvious just what chunk_ino and cluster_ino represent.
Add a tracepoint to make it easier to track each inode cluster as we
scrub it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Hoist the inode cluster checks out of the inobt record check loop into
a separate function in preparation for refactoring of that loop. No
functional changes here; that's in the next patch.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
On a big block filesystem, there may be multiple inobt records covering
a single inode cluster. These records obviously won't be aligned to
cluster alignment rules, and they must cover the entire cluster. Teach
scrub to check for these things.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In xchk_iallocbt_rec, check the alignment of ir_startino by converting
the inode cluster block alignment into units of inodes instead of the
other way around (converting ir_startino to blocks). This prevents us
from tripping over off-by-one errors in ir_startino which are obscured
by the inode -> block conversion.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Make sure we never check more than XFS_INODES_PER_CHUNK inodes for any
given inobt record since there can be more than one inobt record mapped
to an inode cluster.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In xrep_findroot_block, we work out the btree type and correctness of a
given block by calling different btree verifiers on root block
candidates. However, we leave the NULL b_ops while ->verify_read
validates the block, which means that if the verifier calls
xfs_buf_verifier_error it'll crash on the null b_ops. Fix it to set
b_ops before calling the verifier and unsetting it if the verifier
fails.
Furthermore, improve the documentation around xfs_buf_ensure_ops, which
is the function that is responsible for cleaning up the b_ops state of
buffers that go through xrep_findroot_block but don't match anything.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
As of commit e339dd8d8b ("xfs: use sync buffer I/O for sync delwri
queue submission"), the delwri submission code uses sync buffer I/O
for sync delwri I/O. Instead of waiting on async I/O to unlock the
buffer, it uses the underlying sync I/O completion mechanism.
If delwri buffer submission fails due to a shutdown scenario, an
error is set on the buffer and buffer completion never occurs. This
can cause xfs_buf_delwri_submit() to deadlock waiting on a
completion event.
We could check the error state before waiting on such buffers, but
that doesn't serialize against the case of an error set via a racing
I/O completion. Instead, invoke I/O completion in the shutdown case
regardless of buffer I/O type.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The cached writeback mapping is EOF trimmed to try and avoid races
between post-eof block management and writeback that result in
sending cached data to a stale location. The cached mapping is
currently trimmed on the validation check, which leaves a race
window between the time the mapping is cached and when it is trimmed
against the current inode size.
For example, if a new mapping is cached by delalloc conversion on a
blocksize == page size fs, we could cycle various locks, perform
memory allocations, etc. in the writeback codepath before the
associated mapping is eventually trimmed to i_size. This leaves
enough time for a post-eof truncate and file append before the
cached mapping is trimmed. The former event essentially invalidates
a range of the cached mapping and the latter bumps the inode size
such the trim on the next writepage event won't trim all of the
invalid blocks. fstest generic/464 reproduces this scenario
occasionally and causes a lost writeback and stale delalloc blocks
warning on inode inactivation.
To work around this problem, trim the cached writeback mapping as
soon as it is cached in addition to on subsequent validation checks.
This is a minor tweak to tighten the race window as much as possible
until a proper invalidation mechanism is available.
Fixes: 40214d128e ("xfs: trim writepage mapping to within eof")
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Drop LIST_HEAD where the variable it declares is never used.
Commit 0410c3bb2b ("xfs: factor ag btree root block
initialisation") stopped using buffer_list and started using a
buffer list in an aghdr_init_data structure, but the declaration
of buffer_list was not removed.
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier x;
@@
- LIST_HEAD(x);
... when != x
// </smpl>
Fixes: 0410c3bb2b ("xfs: factor ag btree root block initialisation")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Drop LIST_HEAD where the variable it declares has never
been used.
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier x;
@@
- LIST_HEAD(x);
... when != x
// </smpl>
Fixes: 26f1fe858f ("xfs: reduce lock hold times in buffer writeback")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
At mount time, we allocate m_rsum_cache with the number of realtime
bitmap blocks. However, xfs_growfs_rt() can increase the number of
realtime bitmap blocks. Using the cache after this happens may access
out of the bounds of the cache. Fix it by reallocating the cache in this
case.
Fixes: 355e353213 ("xfs: cache minimum realtime summary level")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use __print_symbolic to print the scrub type in ftrace output.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Use __print_symbolic to print the btree type in ftrace output.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Move XFS_INODE_FORMAT_STR to libxfs so that we don't forget to keep it
updated, and add necessary TRACE_DEFINE_ENUM.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Move XFS_AG_BTREE_CMP_FORMAT_STR to libxfs so that we don't forget to
keep it updated, and TRACE_DEFINE_ENUM the values while we're at it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
ftrace's __print_symbolic() has a (very poorly documented) requirement
that any enum values used in the symbol to string translation table be
wrapped in a TRACE_DEFINE_ENUM so that the enum value can be encoded in
the ftrace ring buffer. Fix this unsatisfied requirement.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Use %pS instead of %pF in ftrace strings so that we record the actual
function address instead of the function descriptor.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Several ioctl structs change size between native 32-bit (ia32) and x32
applications, because x32 follows the native 64-bit (amd64) integer
alignment rules and uses 64-bit time_t. In these instances, the ioctl
number changes so userspace simply gets -ENOTTY. This scenario can be
handled by simply adding more cases.
Looking at the different ioctls implemented here:
- All the ones marked 'No size or alignment issue on any arch' should
presumably all be fine.
- All the ones under BROKEN_X86_ALIGNMENT are different under integer
alignment rules. Since x32 matches amd64 here, we just need both
sets of cases handled.
- XFS_IOC_SWAPEXT has both integer alignment differences and time_t
differences. Since x32 matches amd64 here, we need to add a case
which calls the native implementation.
- The remaining ioctls have neither 64-bit integers nor time_t, so
x32 matches ia32 here and no change is required at this level. The
bulkstat ioctl implementations have some pointer chasing which is
handled separately.
Signed-off-by: Nick Bowler <nbowler@draconx.ca>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The bulkstat family of ioctls are problematic on x32, because there is
a mixup of native 32-bit and 64-bit conventions. The xfs_fsop_bulkreq
struct contains pointers and 32-bit integers so that matches the native
32-bit layout, and that means the ioctl implementation goes into the
regular compat path on x32.
However, the 'ubuffer' member of that struct in turn refers to either
struct xfs_inogrp or xfs_bstat (or an array of these). On x32, those
structures match the native 64-bit layout. The compat implementation
writes out the 32-bit version of these structures. This is not the
expected format for x32 userspace, causing problems.
Fortunately the functions which actually output these xfs_inogrp and
xfs_bstat structures have an easy way to select which output format
is required, so we just need a little tweak to select the right format
on x32.
Signed-off-by: Nick Bowler <nbowler@draconx.ca>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
While inspecting the ioctl implementations, I noticed that the compat
implementation of XFS_IOC_ATTRLIST_BY_HANDLE does not do exactly the
same thing as the native implementation. Specifically, the "cursor"
does not appear to be written out to userspace on the compat path,
like it is on the native path.
This adjusts the compat implementation to copy out the cursor just
like the native implementation does. The attrlist cursor does not
require any special compat handling. This fixes xfstests xfs/269
on both IA-32 and x32 userspace, when running on an amd64 kernel.
Signed-off-by: Nick Bowler <nbowler@draconx.ca>
Fixes: 0facef7fb0 ("xfs: in _attrlist_by_handle, copy the cursor back to userspace")
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Since mkfs always formats the filesystem with the realtime bitmap and
summary inodes immediately after the root directory, we should expect
that both of them are present and loadable, even if there isn't a
realtime volume attached. There's no reason to skip this if rbmino ==
NULLFSINO; in fact, this causes an immediate crash if the there /is/ a
realtime volume and someone writes to it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
The realtime summary is a two-dimensional array on disk, effectively:
u32 rsum[log2(number of realtime extents) + 1][number of blocks in the bitmap]
rsum[log][bbno] is the number of extents of size 2**log which start in
bitmap block bbno.
xfs_rtallocate_extent_near() uses xfs_rtany_summary() to check whether
rsum[log][bbno] != 0 for any log level. However, the summary array is
stored in row-major order (i.e., like an array in C), so all of these
entries are not adjacent, but rather spread across the entire summary
file. In the worst case (a full bitmap block), xfs_rtany_summary() has
to check every level.
This means that on a moderately-used realtime device, an allocation will
waste a lot of time finding, reading, and releasing buffers for the
realtime summary. In particular, one of our storage services (which runs
on servers with 8 very slow CPUs and 15 8 TB XFS realtime filesystems)
spends almost 5% of its CPU cycles in xfs_rtbuf_get() and
xfs_trans_brelse() called from xfs_rtany_summary().
One solution would be to also store the summary with the dimensions
swapped. However, this would require a disk format change to a very old
component of XFS.
Instead, we can cache the minimum size which contains any extents. We do
so lazily; rather than guaranteeing that the cache contains the precise
minimum, it always contains a loose lower bound which we tighten when we
read or update a summary block. This only uses a few kilobytes of memory
and is already serialized via the realtime bitmap and summary inode
locks, so the cost is minimal. With this change, the same workload only
spends 0.2% of its CPU cycles in the realtime allocator.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
A big block filesystem might require more than one inobt record to cover
all the inodes in the block. In these cases it is not correct to round
the irec count up to the nearest block because this causes us to
overestimate the number of inode blocks we expect to find.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Store the inode cluster alignment information in units of inodes and
blocks in the mount data so that we don't have to keep recalculating
them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Store the number of inodes and blocks per inode cluster in the mount
data so that we don't have to keep recalculating them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add new helpers to convert units of fs blocks into inodes, and AG blocks
into AG inodes, respectively. Convert all the open-coded conversions
and XFS_OFFBNO_TO_AGINO(, , 0) calls to use them, as appropriate. The
OFFBNO_TO_AGINO macro is retained for xfs_repair.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Owner information for static fs metadata can be defined readonly at
build time because it never changes across filesystems. This enables us
to reduce stack usage (particularly in scrub) because we can use the
statically defined oinfo structures.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Only certain functions actually change the contents of an
xfs_owner_info; the rest can accept a const struct pointer. This will
enable us to save stack space by hoisting static owner info types to
be const global variables.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
There's no need to bundle a pointer to the defer op type into the defer
op control structure. Instead, store the defer op type enum, which
enables us to shorten some of the lines.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Recently, we forgot to port a new defer op type to xfsprogs, which
caused us some userspace pain. Reorganize the way we make libxfs
clients supply defer op type information so that all type information
has to be provided at build time instead of risky runtime dynamic
configuration.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
A log recovery failure has been reproduced where a symlink inode has
a zero length in extent form. It was caused by a shutdown during a
combined fstress+fsmark workload.
The underlying problem is the issue in xfs_inactive_symlink(): the
inode is unlocked between the symlink inactivation/truncation and
the inode being freed. This opens a window for the inode to be
written to disk before it xfs_ifree() removes it from the unlinked
list, marks it free in the inobt and zeros the mode.
For shortform inodes, the fix is simple. xfs_ifree() clears the data
fork state, so there's no need to do it in xfs_inactive_symlink().
This means the shortform fork verifier will not see a zero length
data fork as it mirrors the inode size through to xfs_ifree()), and
hence if the inode gets written back and the fork verifiers are run
they will still see a fork that matches the on-disk inode size.
For extent form (remote) symlinks, it is a little more tricky. Here
we explicitly set the inode size to zero, so the above race can lead
to zero length symlinks on disk. Because the inode is unlinked at
this point (i.e. on the unlinked list) and unreferenced, it can
never be seen again by a user. Hence when we set the inode size to
zeor, also change the type to S_IFREG. xfs_ifree() expects S_IFREG
inodes to be of zero length, and so this avoids all the problems of
zero length symlinks ever hitting the disk. It also avoids the
problem of needing to handle zero length symlink inodes in log
recovery to replay the extent free intents and the remaining
deferops to free the extents the symlink used.
Also add a couple of asserts to warn us if zero length symlinks end
up in either the symlink create or inactivation paths.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is a statement that has an unwanted space in the indentation.
Remove it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The function xfs_alloc_get_freelist calls xfs_perag_put to drop the
reference. However, pag->pagf_btreeblks is read and written after the
put operation. This patch moves the put operation later.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
[darrick: minor changelog edits]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In xfs_reflink_end_cow, we allocate a single transaction for the entire
end_cow operation and then loop the CoW fork mappings to move them to
the data fork. This design fails on a heavily fragmented filesystem
where an inode's data fork has exactly one more extent than would fit in
an extents-format fork, because the unmap can collapse the data fork
into extents format (freeing the bmbt block) but the remap can expand
the data fork back into a (newly allocated) bmbt block. If the number
of extents we end up remapping is large, we can overflow the block
reservation because we reserved blocks assuming that we were adding
mappings into an already-cleared area of the data fork.
Let's say we have 8 extents in the data fork, 8 extents in the CoW fork,
and the data fork can hold at most 7 extents before needing to convert
to btree format; and that blocks A-P are discontiguous single-block
extents:
0......7
D: ABCDEFGH
C: IJKLMNOP
When a write to file blocks 0-7 completes, we must remap I-P into the
data fork. We start by removing H from the btree-format data fork. Now
we have 7 extents, so we convert the fork to extents format, freeing the
bmbt block. We then move P into the data fork and it now has 8 extents
again. We must convert the data fork back to btree format, requiring a
block allocation. If we repeat this sequence for blocks 6-5-4-3-2-1-0,
we'll need a total of 8 block allocations to remap all 8 blocks. We
reserved only enough blocks to handle one btree split (5 blocks on a 4k
block filesystem), which means we overflow the block reservation.
To fix this issue, create a separate helper function to remap a single
extent, and change _reflink_end_cow to call it in a tight loop over the
entire range we're completing. As a side effect this also removes the
size restrictions on how many extents we can end_cow at a time, though
nobody ever hit that. It is not reasonable to reserve N blocks to remap
N blocks.
Note that this can be reproduced after ~320 million fsx ops while
running generic/938 (long soak directio fsx exerciser):
XFS: Assertion failed: tp->t_blk_res >= tp->t_blk_res_used, file: fs/xfs/xfs_trans.c, line: 116
<machine registers snipped>
Call Trace:
xfs_trans_dup+0x211/0x250 [xfs]
xfs_trans_roll+0x6d/0x180 [xfs]
xfs_defer_trans_roll+0x10c/0x3b0 [xfs]
xfs_defer_finish_noroll+0xdf/0x740 [xfs]
xfs_defer_finish+0x13/0x70 [xfs]
xfs_reflink_end_cow+0x2c6/0x680 [xfs]
xfs_dio_write_end_io+0x115/0x220 [xfs]
iomap_dio_complete+0x3f/0x130
iomap_dio_rw+0x3c3/0x420
xfs_file_dio_aio_write+0x132/0x3c0 [xfs]
xfs_file_write_iter+0x8b/0xc0 [xfs]
__vfs_write+0x193/0x1f0
vfs_write+0xba/0x1c0
ksys_write+0x52/0xc0
do_syscall_64+0x50/0x160
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
xfs_btree_sblock_verify_crc is a bool so should not be returning
a failaddr_t; worse, if xfs_log_check_lsn fails it returns
__this_address which looks like a boolean true (i.e. success)
to the caller.
(interestingly xfs_btree_lblock_verify_crc doesn't have the issue)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In commit e53c4b598, I *tried* to teach xfs to force writeback when we
fzero/fpunch right up to EOF so that if EOF is in the middle of a page,
the post-EOF part of the page gets zeroed before we return to userspace.
Unfortunately, I missed the part where PAGE_MASK is ~(PAGE_SIZE - 1),
which means that we totally fail to zero if we're fpunching and EOF is
within the first page. Worse yet, the same PAGE_MASK thinko plagues the
filemap_write_and_wait_range call, so we'd initiate writeback of the
entire file, which (mostly) masked the thinko.
Drop the tricky PAGE_MASK and replace it with correct usage of PAGE_SIZE
and the proper rounding macros.
Fixes: e53c4b598 ("xfs: ensure post-EOF zeroing happens after zeroing part of a file")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When project is set, we should use inode limit minus the used count
Signed-off-by: Ye Yin <dbyin@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Long saga. There have been days spent following this through dead end
after dead end in multi-GB event traces. This morning, after writing
a trace-cmd wrapper that enabled me to be more selective about XFS
trace points, I discovered that I could get just enough essential
tracepoints enabled that there was a 50:50 chance the fsx config
would fail at ~115k ops. If it didn't fail at op 115547, I stopped
fsx at op 115548 anyway.
That gave me two traces - one where the problem manifested, and one
where it didn't. After refining the traces to have the necessary
information, I found that in the failing case there was a real
extent in the COW fork compared to an unwritten extent in the
working case.
Walking back through the two traces to the point where the CWO fork
extents actually diverged, I found that the bad case had an extra
unwritten extent in it. This is likely because the bug it led me to
had triggered multiple times in those 115k ops, leaving stray
COW extents around. What I saw was a COW delalloc conversion to an
unwritten extent (as they should always be through
xfs_iomap_write_allocate()) resulted in a /written extent/:
xfs_writepage: dev 259:0 ino 0x83 pgoff 0x17000 size 0x79a00 offset 0 length 0
xfs_iext_remove: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/2 offset 32 block 152 count 20 flag 1 caller xfs_bmap_add_extent_delay_real
xfs_bmap_pre_update: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/1 offset 1 block 4503599627239429 count 31 flag 0 caller xfs_bmap_add_extent_delay_real
xfs_bmap_post_update: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/1 offset 1 block 121 count 51 flag 0 caller xfs_bmap_add_ex
Basically, Cow fork before:
0 1 32 52
+H+DDDDDDDDDDDD+UUUUUUUUUUU+
PREV RIGHT
COW delalloc conversion allocates:
1 32
+uuuuuuuuuuuu+
NEW
And the result according to the xfs_bmap_post_update trace was:
0 1 32 52
+H+wwwwwwwwwwwwwwwwwwwwwwww+
PREV
Which is clearly wrong - it should be a merged unwritten extent,
not an unwritten extent.
That lead me to look at the LEFT_FILLING|RIGHT_FILLING|RIGHT_CONTIG
case in xfs_bmap_add_extent_delay_real(), and sure enough, there's
the bug.
It takes the old delalloc extent (PREV) and adds the length of the
RIGHT extent to it, takes the start block from NEW, removes the
RIGHT extent and then updates PREV with the new extent.
What it fails to do is update PREV.br_state. For delalloc, this is
always XFS_EXT_NORM, while in this case we are converting the
delayed allocation to unwritten, so it needs to be updated to
XFS_EXT_UNWRITTEN. This LF|RF|RC case does not do this, and so
the resultant extent is always written.
And that's the bug I've been chasing for a week - a bmap btree bug,
not a reflink/dedupe/copy_file_range bug, but a BMBT bug introduced
with the recent in core extent tree scalability enhancements.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
On a sub-page block size filesystem, fsx is failing with a data
corruption after a series of operations involving copying a file
with the destination offset beyond EOF of the destination of the file:
8093(157 mod 256): TRUNCATE DOWN from 0x7a120 to 0x50000 ******WWWW
8094(158 mod 256): INSERT 0x25000 thru 0x25fff (0x1000 bytes)
8095(159 mod 256): COPY 0x18000 thru 0x1afff (0x3000 bytes) to 0x2f400
8096(160 mod 256): WRITE 0x5da00 thru 0x651ff (0x7800 bytes) HOLE
8097(161 mod 256): COPY 0x2000 thru 0x5fff (0x4000 bytes) to 0x6fc00
The second copy here is beyond EOF, and it is to sub-page (4k) but
block aligned (1k) offset. The clone runs the EOF zeroing, landing
in a pre-existing post-eof delalloc extent. This zeroes the post-eof
extents in the page cache just fine, dirtying the pages correctly.
The problem is that xfs_reflink_remap_prep() now truncates the page
cache over the range that it is copying it to, and rounds that down
to cover the entire start page. This removes the dirty page over the
delalloc extent from the page cache without having written it back.
Hence later, when the page cache is flushed, the page at offset
0x6f000 has not been written back and hence exposes stale data,
which fsx trips over less than 10 operations later.
Fix this by changing xfs_reflink_remap_prep() to use
xfs_flush_unmap_range().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The extent shifting code uses a flush and invalidate mechainsm prior
to shifting extents around. This is similar to what
xfs_free_file_space() does, but it doesn't take into account things
like page cache vs block size differences, and it will fail if there
is a page that it currently busy.
xfs_flush_unmap_range() handles all of these cases, so just convert
xfs_prepare_shift() to us that mechanism rather than having it's own
special sauce.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The last AG may be very small comapred to all other AGs, and hence
AG reservations based on the superblock AG size may actually consume
more space than the AG actually has. This results on assert failures
like:
XFS: Assertion failed: xfs_perag_resv(pag, XFS_AG_RESV_METADATA)->ar_reserved + xfs_perag_resv(pag, XFS_AG_RESV_RMAPBT)->ar_reserved <= pag->pagf_freeblks + pag->pagf_flcount, file: fs/xfs/libxfs/xfs_ag_resv.c, line: 319
[ 48.932891] xfs_ag_resv_init+0x1bd/0x1d0
[ 48.933853] xfs_fs_reserve_ag_blocks+0x37/0xb0
[ 48.934939] xfs_mountfs+0x5b3/0x920
[ 48.935804] xfs_fs_fill_super+0x462/0x640
[ 48.936784] ? xfs_test_remount_options+0x60/0x60
[ 48.937908] mount_bdev+0x178/0x1b0
[ 48.938751] mount_fs+0x36/0x170
[ 48.939533] vfs_kern_mount.part.43+0x54/0x130
[ 48.940596] do_mount+0x20e/0xcb0
[ 48.941396] ? memdup_user+0x3e/0x70
[ 48.942249] ksys_mount+0xba/0xd0
[ 48.943046] __x64_sys_mount+0x21/0x30
[ 48.943953] do_syscall_64+0x54/0x170
[ 48.944835] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Hence we need to ensure the finobt per-ag space reservations take
into account the size of the last AG rather than treat it like all
the other full size AGs.
Note that both refcountbt and rmapbt already take the size of the AG
into account via reading the AGF length directly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When retrying a failed inode or dquot buffer,
xfs_buf_resubmit_failed_buffers() clears all the failed flags from
the inde/dquot log items. In doing so, it also drops all the
reference counts on the buffer that the failed log items hold. This
means it can drop all the active references on the buffer and hence
free the buffer before it queues it for write again.
Putting the buffer on the delwri queue takes a reference to the
buffer (so that it hangs around until it has been written and
completed), but this goes bang if the buffer has already been freed.
Hence we need to add the buffer to the delwri queue before we remove
the failed flags from the log items attached to the buffer to ensure
it always remains referenced during the resubmit process.
Reported-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_file_remap_range() is only used in fs/xfs/xfs_file.c, so make it
static.
This addresses a gcc warning when -Wmissing-prototypes is enabled.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Page writeback indirectly handles shared extents via the existence
of overlapping COW fork blocks. If COW fork blocks exist, writeback
always performs the associated copy-on-write regardless if the
underlying blocks are actually shared. If the blocks are shared,
then overlapping COW fork blocks must always exist.
fstests shared/010 reproduces a case where a buffered write occurs
over a shared block without performing the requisite COW fork
reservation. This ultimately causes writeback to the shared extent
and data corruption that is detected across md5 checks of the
filesystem across a mount cycle.
The problem occurs when a buffered write lands over a shared extent
that crosses an extent size hint boundary and that also happens to
have a partial COW reservation that doesn't cover the start and end
blocks of the data fork extent.
For example, a buffered write occurs across the file offset (in FSB
units) range of [29, 57]. A shared extent exists at blocks [29, 35]
and COW reservation already exists at blocks [32, 34]. After
accommodating a COW extent size hint of 32 blocks and the existing
reservation at offset 32, xfs_reflink_reserve_cow() allocates 32
blocks of reservation at offset 0 and returns with COW reservation
across the range of [0, 34]. The associated data fork extent is
still [29, 35], however, which isn't fully covered by the COW
reservation.
This leads to a buffered write at file offset 35 over a shared
extent without associated COW reservation. Writeback eventually
kicks in, performs an overwrite of the underlying shared block and
causes the associated data corruption.
Update xfs_reflink_reserve_cow() to accommodate the fact that a
delalloc allocation request may not fully cover the extent in the
data fork. Trim the data fork extent appropriately, just as is done
for shared extent boundaries and/or existing COW reservations that
happen to overlap the start of the data fork extent. This prevents
shared/010 failures due to data corruption on reflink enabled
filesystems.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
generic/070 on 64k block size filesystems is failing with a verifier
corruption on writeback or an attribute leaf block:
[ 94.973083] XFS (pmem0): Metadata corruption detected at xfs_attr3_leaf_verify+0x246/0x260, xfs_attr3_leaf block 0x811480
[ 94.975623] XFS (pmem0): Unmount and run xfs_repair
[ 94.976720] XFS (pmem0): First 128 bytes of corrupted metadata buffer:
[ 94.978270] 000000004b2e7b45: 00 00 00 00 00 00 00 00 3b ee 00 00 00 00 00 00 ........;.......
[ 94.980268] 000000006b1db90b: 00 00 00 00 00 81 14 80 00 00 00 00 00 00 00 00 ................
[ 94.982251] 00000000433f2407: 22 7b 5c 82 2d 5c 47 4c bb 31 1c 37 fa a9 ce d6 "{\.-\GL.1.7....
[ 94.984157] 0000000010dc7dfb: 00 00 00 00 00 81 04 8a 00 0a 18 e8 dd 94 01 00 ................
[ 94.986215] 00000000d5a19229: 00 a0 dc f4 fe 98 01 68 f0 d8 07 e0 00 00 00 00 .......h........
[ 94.988171] 00000000521df36c: 0c 2d 32 e2 fe 20 01 00 0c 2d 58 65 fe 0c 01 00 .-2.. ...-Xe....
[ 94.990162] 000000008477ae06: 0c 2d 5b 66 fe 8c 01 00 0c 2d 71 35 fe 7c 01 00 .-[f.....-q5.|..
[ 94.992139] 00000000a4a6bca6: 0c 2d 72 37 fc d4 01 00 0c 2d d8 b8 f0 90 01 00 .-r7.....-......
[ 94.994789] XFS (pmem0): xfs_do_force_shutdown(0x8) called from line 1453 of file fs/xfs/xfs_buf.c. Return address = ffffffff815365f3
This is failing this check:
end = ichdr.freemap[i].base + ichdr.freemap[i].size;
if (end < ichdr.freemap[i].base)
>>>>> return __this_address;
if (end > mp->m_attr_geo->blksize)
return __this_address;
And from the buffer output above, the freemap array is:
freemap[0].base = 0x00a0
freemap[0].size = 0xdcf4 end = 0xdd94
freemap[1].base = 0xfe98
freemap[1].size = 0x0168 end = 0x10000
freemap[2].base = 0xf0d8
freemap[2].size = 0x07e0 end = 0xf8b8
These all look valid - the block size is 0x10000 and so from the
last check in the above verifier fragment we know that the end
of freemap[1] is valid. The problem is that end is declared as:
uint16_t end;
And (uint16_t)0x10000 = 0. So we have a verifier bug here, not a
corruption. Fix the verifier to use uint32_t types for the check and
hence avoid the overflow.
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=201577
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use DUMP_PREFIX_OFFSET when printing hex dumps of corrupt buffers
because modern Linux now prints a 32-bit hash of our 64-bit pointer when
using DUMP_PREFIX_ADDRESS:
00000000b4bb4297: 00 00 00 00 00 00 00 00 3b ee 00 00 00 00 00 00 ........;.......
00000005ec77e26: 00 00 00 00 02 d0 5a 00 00 00 00 00 00 00 00 00 ......Z.........
000000015938018: 21 98 e8 b4 fd de 4c 07 bc ea 3c e5 ae b4 7c 48 !.....L...<...|H
This is totally worthless for a sequential dump since we probably only
care about tracking the buffer offsets and afaik there's no way to
recover the actual pointer from the hashed value.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
In this function, once 'buf' has been allocated, we unconditionally
return 0.
However, 'error' is set to some error codes in several error handling
paths.
Before commit 232b51948b ("xfs: simplify the xfs_getbmap interface")
this was not an issue because all error paths were returning directly,
but now that some cleanup at the end may be needed, we must propagate the
error code.
Fixes: 232b51948b ("xfs: simplify the xfs_getbmap interface")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Rework the vfs_clone_file_range and vfs_dedupe_file_range infrastructure to use
a common .remap_file_range method and supply generic bounds and sanity checking
functions that are shared with the data write path. The current VFS
infrastructure has problems with rlimit, LFS file sizes, file time stamps,
maximum filesystem file sizes, stripping setuid bits, etc and so they are
addressed in these commits.
We also introduce the ability for the ->remap_file_range methods to return short
clones so that clones for vfs_copy_file_range() don't get rejected if the entire
range can't be cloned. It also allows filesystems to sliently skip deduplication
of partial EOF blocks if they are not capable of doing so without requiring
errors to be thrown to userspace.
All existing filesystems are converted to user the new .remap_file_range method,
and both XFS and ocfs2 are modified to make use of the new generic checking
infrastructure.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CE/A
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.20-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull vfs dedup fixes from Dave Chinner:
"This reworks the vfs data cloning infrastructure.
We discovered many issues with these interfaces late in the 4.19 cycle
- the worst of them (data corruption, setuid stripping) were fixed for
XFS in 4.19-rc8, but a larger rework of the infrastructure fixing all
the problems was needed. That rework is the contents of this pull
request.
Rework the vfs_clone_file_range and vfs_dedupe_file_range
infrastructure to use a common .remap_file_range method and supply
generic bounds and sanity checking functions that are shared with the
data write path. The current VFS infrastructure has problems with
rlimit, LFS file sizes, file time stamps, maximum filesystem file
sizes, stripping setuid bits, etc and so they are addressed in these
commits.
We also introduce the ability for the ->remap_file_range methods to
return short clones so that clones for vfs_copy_file_range() don't get
rejected if the entire range can't be cloned. It also allows
filesystems to sliently skip deduplication of partial EOF blocks if
they are not capable of doing so without requiring errors to be thrown
to userspace.
Existing filesystems are converted to user the new remap_file_range
method, and both XFS and ocfs2 are modified to make use of the new
generic checking infrastructure"
* tag 'xfs-4.20-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (28 commits)
xfs: remove [cm]time update from reflink calls
xfs: remove xfs_reflink_remap_range
xfs: remove redundant remap partial EOF block checks
xfs: support returning partial reflink results
xfs: clean up xfs_reflink_remap_blocks call site
xfs: fix pagecache truncation prior to reflink
ocfs2: remove ocfs2_reflink_remap_range
ocfs2: support partial clone range and dedupe range
ocfs2: fix pagecache truncation prior to reflink
ocfs2: truncate page cache for clone destination file before remapping
vfs: clean up generic_remap_file_range_prep return value
vfs: hide file range comparison function
vfs: enable remap callers that can handle short operations
vfs: plumb remap flags through the vfs dedupe functions
vfs: plumb remap flags through the vfs clone functions
vfs: make remap_file_range functions take and return bytes completed
vfs: remap helper should update destination inode metadata
vfs: pass remap flags to generic_remap_checks
vfs: pass remap flags to generic_remap_file_range_prep
vfs: combine the clone and dedupe into a single remap_file_range
...
Now that the vfs remap helper dirties the inode [cm]time for us, xfs no
longer needs to do that on its own.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Since xfs_file_remap_range is a thin wrapper, move the contents of
xfs_reflink_remap_range into the shell. This cuts down on the vfs
calls being made from internal xfs code.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Now that we've moved the partial EOF block checks to the VFS helpers, we
can remove the redundant functionality from XFS.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Back when the XFS reflink code only supported clone_file_range, we were
only able to return zero or negative error codes to userspace. However,
now that copy_file_range (which returns bytes copied) can use XFS'
clone_file_range, we have the opportunity to return partial results.
For example, if userspace sends a 1GB clone request and we run out of
space halfway through, we at least can tell userspace that we completed
512M of that request like a regular write.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Move the offset <-> blocks unit conversions into
xfs_reflink_remap_blocks to make the call site less ugly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Prior to remapping blocks, it is necessary to remove pages from the
destination file's page cache. Unfortunately, the truncation is not
aggressive enough -- if page size > block size, we'll end up zeroing
subpage blocks instead of removing them. So, round the start offset
down and the end offset up to page boundaries. We already wrote all
the dirty data so the larger range shouldn't be a problem.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Since the remap prep function can update the length of the remap
request, we can change this function to return the usual return status
instead of the odd behavior it has now.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Change the remap_file_range functions to take a number of bytes to
operate upon and return the number of bytes they operated on. This is a
requirement for allowing fs implementations to return short clone/dedupe
results to the user, which will enable us to obey resource limits in a
graceful manner.
A subsequent patch will enable copy_file_range to signal to the
->clone_file_range implementation that it can handle a short length,
which will be returned in the function's return value. For now the
short return is not implemented anywhere so the behavior won't change --
either copy_file_range manages to clone the entire range or it tries an
alternative.
Neither clone ioctl can take advantage of this, alas.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Extend generic_remap_file_range_prep to handle inode metadata updates
when remapping into a file. If the operation can possibly alter the
file contents, we must update the ctime and mtime and remove security
privileges, just like we do for regular file writes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Plumb the remap flags through the filesystem from the vfs function
dispatcher all the way to the prep function to prepare for behavior
changes in subsequent patches.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Combine the clone_file_range and dedupe_file_range operations into a
single remap_file_range file operation dispatch since they're
fundamentally the same operation. The differences between the two can
be made in the prep functions.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The vfs_clone_file_prep is a generic function to be called by filesystem
implementations only. Rename the prefix to generic_ and make it more
clear that it applies to remap operations, not just clones.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Move the file range checks from vfs_clone_file_prep into a separate
generic_remap_checks function so that all the checks are collected in a
central location. This forms the basis for adding more checks from
generic_write_checks that will make cloning's input checking more
consistent with write input checking.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In the typical unmount case, the AIL is forced out by the unmount
sequence before the xfsaild task is stopped. Since AIL items are
removed on writeback completion, this means that the AIL
->ail_buf_list delwri queue has been drained. This is not always
true in the shutdown case, however.
It's possible for buffers to sit on a delwri queue for a period of
time across submission attempts if said items are locked or have
been relogged and pinned since first added to the queue. If the
attempt to log such an item results in a log I/O error, the error
processing can shutdown the fs, remove the item from the AIL, stale
the buffer (dropping the LRU reference) and clear its delwri queue
state. The latter bit means the buffer will be released from a
delwri queue on the next submission attempt, but this might never
occur if the filesystem has shutdown and the AIL is empty.
This means that such buffers are held indefinitely by the AIL delwri
queue across destruction of the AIL. Aside from being a memory leak,
these buffers can also hold references to in-core perag structures.
The latter problem manifests as a generic/475 failure, reproducing
the following asserts at unmount time:
XFS: Assertion failed: atomic_read(&pag->pag_ref) == 0,
file: fs/xfs/xfs_mount.c, line: 151
XFS: Assertion failed: atomic_read(&pag->pag_ref) == 0,
file: fs/xfs/xfs_mount.c, line: 132
To prevent this problem, clear the AIL delwri queue as a final step
before xfsaild() exit. The !empty state should never occur in the
normal case, so add an assert to catch unexpected problems going
forward.
[dgc: add comment explaining need for xfs_buf_delwri_cancel() after
calling xfs_buf_delwri_submit_nowait().]
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Most offset macro mess is used in xfs_stats_format() only, and we can
simply get the right offsets using offsetof(), instead of several macros
to mark the offsets inside __xfsstats structure.
Replace all XFSSTAT_END_* macros by a single helper macro to get the
right offset into __xfsstats, and use this helper in xfs_stats_format()
directly.
The quota stats code, still looks a bit cleaner when using XFSSTAT_*
macros, so, this patch also defines XFSSTAT_START_XQMSTAT and
XFSSTAT_END_XQMSTAT locally to that code. This also should prevent
offset mistakes when updates are done into __xfsstats.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The addition of FIBT, RMAP and REFCOUNT changed the offsets into
__xfssats structure.
This caused xqmstat_proc_show() to display garbage data via
/proc/fs/xfs/xqmstat, once it relies on the offsets marked via macros.
Fix it.
Fixes: 00f4e4f9 xfs: add rmap btree stats infrastructure
Fixes: aafc3c24 xfs: support the XFS_BTNUM_FINOBT free inode btree type
Fixes: 46eeb521 xfs: introduce refcount btree definitions
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When looking at a 4.18 based KASAN use after free report, I noticed
that racing xfs_buf_rele() may race on dropping the last reference
to the buffer and taking the buffer lock. This was the symptom
displayed by the KASAN report, but the actual issue that was
reported had already been fixed in 4.19-rc1 by commit e339dd8d8b
("xfs: use sync buffer I/O for sync delwri queue submission").
Despite this, I think there is still an issue with xfs_buf_rele()
in this code:
release = atomic_dec_and_lock(&bp->b_hold, &pag->pag_buf_lock);
spin_lock(&bp->b_lock);
if (!release) {
.....
If two threads race on the b_lock after both dropping a reference
and one getting dropping the last reference so release = true, we
end up with:
CPU 0 CPU 1
atomic_dec_and_lock()
atomic_dec_and_lock()
spin_lock(&bp->b_lock)
spin_lock(&bp->b_lock)
<spins>
<release = true bp->b_lru_ref = 0>
<remove from lists>
freebuf = true
spin_unlock(&bp->b_lock)
xfs_buf_free(bp)
<gets lock, reading and writing freed memory>
<accesses freed memory>
spin_unlock(&bp->b_lock) <reads/writes freed memory>
IOWs, we can't safely take bp->b_lock after dropping the hold
reference because the buffer may go away at any time after we
drop that reference. However, this can be fixed simply by taking the
bp->b_lock before we drop the reference.
It is safe to nest the pag_buf_lock inside bp->b_lock as the
pag_buf_lock is only used to serialise against lookup in
xfs_buf_find() and no other locks are held over or under the
pag_buf_lock there. Make this clear by documenting the buffer lock
orders at the top of the file.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch adds xfs_attr_remove_args. These sub-routines remove
the attributes specified in @args. We will use this later for setting
parent pointers as a deferred attribute operation.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch adds xfs_attr_set_args and xfs_bmap_set_attrforkoff.
These sub-routines set the attributes specified in @args.
We will use this later for setting parent pointers as a deferred
attribute operation.
[dgc: remove attr fork init code from xfs_attr_set_args().]
[dgc: xfs_attr_try_sf_addname() NULLs args.trans after commit.]
[dgc: correct sf add error handling.]
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch adds a subroutine xfs_attr_try_sf_addname
used by xfs_attr_set. This subrotine will attempt to
add the attribute name specified in args in shortform,
as well and perform error handling previously done in
xfs_attr_set.
This patch helps to pre-simplify xfs_attr_set for reviewing
purposes and reduce indentation. New function will be added
in the next patch.
[dgc: moved commit to helper function, too.]
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch moves fs/xfs/xfs_attr.h to fs/xfs/libxfs/xfs_attr.h
since xfs_attr.c is in libxfs. We will need these later in
xfsprogs.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The kernel only issues a log message that it's been shut down when
the filesystem triggers a shutdown itself. Hence there is no trace
in the log when a shutdown is triggered manually from userspace.
This can make it hard to see sequence of events in the log when
things go wrong, so make sure we always log a message when a
shutdown is run.
While there, clean up the logic flow so we don't have to continually
check if the shutdown trigger was user initiated before logging
shutdown messages.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We don't handle buffer state properly in online repair's findroot
routine. If a buffer already has b_ops set, we don't ever want to touch
that, and we don't want to call the read verifiers on a buffer that
could be dirty (CRCs are only recomputed during log checkpoints).
Therefore, be more careful about what we do with a buffer -- if someone
else already attached ops that are not the ones for this btree type,
just ignore the buffer. We only attach our btree type's buf ops if it
matches the magic/uuid and structure checks.
We also modify xfs_buf_read_map to allow callers to set buffer ops on a
DONE buffer with NULL ops so that repair doesn't leave behind buffers
which won't have buffers attached to them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If a caller supplies buffer ops when trying to read a buffer and the
buffer doesn't already have buf ops assigned, ensure that the ops are
assigned to the buffer and the verifier is run on that buffer.
Note that current XFS code is careful to assign buffer ops after a
xfs_{trans_,}buf_read call in which ops were not supplied. However, we
should apply ops defensively in case there is ever a coding mistake; and
an upcoming repair patch will need to be able to read a buffer without
assigning buf ops.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In xrep_findroot_block, if we find a candidate root block with sibling
pointers or sibling blocks on the same tree level, we should not return
that block as a tree root because root blocks cannot have siblings.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Needed by userspace programs that call fstatfs().
It'd be natural to publish XFS_SB_MAGIC in uapi, but while these two
have identical values, they have different semantic meaning: one is
an enum cookie meant for statfs, the other a signature of the
on-disk format.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Instead of just asserting that we have no delalloc space dangling
in an inode that gets freed print the actual offenders for debug
mode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We should want to write directly into the data fork for blocks that don't
have an extent in the COW fork covering them yet.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We only need to allocate blocks for zeroing for reflink inodes,
and for we currently have a special case for reflink files in
the otherwise direct I/O path that I'd like to get rid of.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The option to enable unwritten extents was made default in 2003,
removed from mkfs in 2007, and cannot be disabled in v5. We also
rely on it for a lot of common functionality, so filesystems without
it will run a completely untested and buggy code path. Enabling the
support also is a simple bit flip using xfs_db, so legacy file
systems can still be brought forward.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The invalid state isn't any different from a hole, so merge the two
states. Use the more descriptive hole name, but keep it as the first
value of the enum to catch uninitialized fields.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When reflinking sub-file ranges, a data corruption can occur when
the source file range includes a partial EOF block. This shares the
unknown data beyond EOF into the second file at a position inside
EOF, exposing stale data in the second file.
XFS only supports whole block sharing, but we still need to
support whole file reflink correctly. Hence if the reflink
request includes the last block of the souce file, only proceed with
the reflink operation if it lands at or past the destination file's
current EOF. If it lands within the destination file EOF, reject the
entire request with -EINVAL and make the caller go the hard way.
This avoids the data corruption vector, but also avoids disruption
of returning EINVAL to userspace for the common case of whole file
cloning.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
A deduplication data corruption is Exposed by fstests generic/505 on
XFS. It is caused by extending the block match range to include the
partial EOF block, but then allowing unknown data beyond EOF to be
considered a "match" to data in the destination file because the
comparison is only made to the end of the source file. This corrupts
the destination file when the source extent is shared with it.
XFS only supports whole block dedupe, but we still need to appear to
support whole file dedupe correctly. Hence if the dedupe request
includes the last block of the souce file, don't include it in the
actual XFS dedupe operation. If the rest of the range dedupes
successfully, then report the partial last block as deduped, too, so
that userspace sees it as a successful dedupe rather than return
EINVAL because we can't dedupe unaligned blocks.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Before cloning into a file, update the ctime and remove sensitive
attributes like suid, just like we'd do for a regular file write.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When we're reflinking between two files and the destination file range
is well beyond the destination file's EOF marker, zero any posteof
speculative preallocations in the destination file so that we don't
expose stale disk contents. The previous strategy of trying to clear
the preallocations does not work if the destination file has the
PREALLOC flag set.
Uncovered by shared/010.
Reported-by: Zorro Lang <zlang@redhat.com>
Bugzilla-id: https://bugzilla.kernel.org/show_bug.cgi?id=201259
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Refactor all the reflink preparation steps into a separate helper
that we'll use to land all the upcoming fixes for insufficient input
checks.
This rework also moves the invalidation of the destination range to
the prep function so that it is done before the range is remapped.
This ensures that nobody can access the data in range being remapped
until the remap is complete.
[dgc: fix xfs_reflink_remap_prep() return value and caller check to
handle vfs_clone_file_prep_inodes() returning 0 to mean "nothing to
do". ]
[dgc: make sure length changed by vfs_clone_file_prep_inodes() gets
propagated back to XFS code that does the remapping. ]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Commit 01239d77b9 ("xfs: fix a null pointer dereference in
xfs_bmap_extents_to_btree") attempted to fix a null pointer
dreference when a fuzzing corruption of some kind was found.
This fix was flawed, resulting in assert failures like:
XFS: Assertion failed: ifp->if_broot == NULL, file: fs/xfs/libxfs/xfs_bmap.c, line: 715
.....
Call Trace:
xfs_bmap_extents_to_btree+0x6b9/0x7b0
__xfs_bunmapi+0xae7/0xf00
? xfs_log_reserve+0x1c8/0x290
xfs_reflink_remap_extent+0x20b/0x620
xfs_reflink_remap_blocks+0x7e/0x290
xfs_reflink_remap_range+0x311/0x530
vfs_dedupe_file_range_one+0xd7/0xe0
vfs_dedupe_file_range+0x15b/0x1a0
do_vfs_ioctl+0x267/0x6c0
The problem is that the error handling code now asserts that the
inode fork is not in btree format before the error handling code
undoes the modifications that put the fork back in extent format.
Fix this by moving the assert back to after the xfs_iroot_realloc()
call that returns the fork to extent format, and clean up the jump
labels to be meaningful.
Also, returning ENOSPC when xfs_btree_get_bufl() fails to
instantiate the buffer that was allocated (the actual fix in the
commit mentioned above) is incorrect. This is a fatal error - only
an invalid block address or a filesystem shutdown can result in
failing to get a buffer here.
Hence change this to EFSCORRUPTED so that the higher layer knows
this was a corruption related failure and should not treat it as an
ENOSPC error. This should result in a shutdown (via cancelling a
dirty transaction) which is necessary as we do not attempt to clean
up the (invalid) block that we have already allocated.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
One of the first steps of log recovery is to check for the special
case of a zeroed log. If the first cycle in the log is zero or the
tail portion of the log is zeroed, the head is set to the first
instance of cycle 0. xlog_find_zeroed() includes a sanity check that
enforces that the first cycle in the log must be 1 if the last cycle
is 0. While this is true in most cases, the check is not totally
valid because it doesn't consider the case where the filesystem
crashed after a partial/out of order log buffer completion that
wraps around the end of the physical log.
For example, consider a filesystem that has completed most of the
first cycle of the log, reaches the end of the physical log and
splits the next single log buffer write into two in order to wrap
around the end of the log. If these I/Os are reordered, the second
(wrapped) I/O completes and the first happens to fail, the log is
left in a state where the last cycle of the log is 0 and the first
cycle is 2. This causes the xlog_find_zeroed() sanity check to fail
and prevents the filesystem from mounting. This situation has been
reproduced on particular systems via repeated runs of generic/475.
This is an expected state that log recovery already knows how to
deal with, however. Since the log is still partially zeroed, the
head is detected correctly and points to a valid tail. The
subsequent stale block detection clears blocks beyond the head up to
the tail (within a maximum range), with the express purpose of
clearing such out of order writes. As expected, this removes the out
of order cycle 2 blocks at the physical start of the log.
In other words, the only thing that prevents a clean mount and
recovery of the filesystem in this scenario is the specific (last ==
0 && first != 1) sanity check in xlog_find_zeroed(). Since the log
head/tail are now independently validated via cycle, log record and
CRC checks, this highly specific first cycle check is of dubious
value. Remove it and rely on the higher level validation to
determine whether log content is sane and recoverable.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Verify the inode di_forkoff, lifted from xfs_repair's
process_check_inode_forkoff().
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The iomap direct I/O code issues a single ->end_io call for the whole
I/O request, and if some of the extents cowered needed a COW operation
it will call xfs_reflink_end_cow over the whole range.
When we do AIO writes we drop the iolock after doing the initial setup,
but before the I/O completion. Between dropping the lock and completing
the I/O we can have a racing buffered write create new delalloc COW fork
extents in the region covered by the outstanding direct I/O write, and
thus see delalloc COW fork extents in xfs_reflink_end_cow. As
concurrent writes are fundamentally racy and no guarantees are given we
can simply skip those.
This can be easily reproduced with xfstests generic/208 in always_cow
mode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xchk_inode_flags2() currently treats any di_flags2 values that the
running kernel doesn't recognize as corruption, and calls
xchk_ino_set_corrupt() if they are set. However, it's entirely possible
that these flags were set in some newer kernel and are quite valid,
but ignored in this kernel.
(Validators don't care one bit about unknown di_flags2.)
Call xchk_ino_set_warning instead, because this may or may not actually
indicate a problem.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Remove duplicated include xfs_alloc.h
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This function is only used to punch out delayed allocations on I/O
failure, which means we need to have read the extents earlier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When xfs_reflink_allocate_cow() allocates a transaction, it drops
the ILOCK to perform the operation. This Introduces a race condition
where another thread modifying the file can perform the COW
allocation operation underneath us. This result in the retry loop
finding an allocated block and jumping straight to the conversion
code. It does not, however, cancel the transaction it holds and so
this gets leaked. This results in a lockdep warning:
================================================
WARNING: lock held when returning to user space!
4.18.5 #1 Not tainted
------------------------------------------------
worker/6123 is leaving the kernel with locks still held!
1 lock held by worker/6123:
#0: 000000009eab4f1b (sb_internal#2){.+.+}, at: xfs_trans_alloc+0x17c/0x220
And eventually the filesystem deadlocks because it runs out of log
space that is reserved by the leaked transaction and never gets
released.
The logic flow in xfs_reflink_allocate_cow() is a convoluted mess of
gotos - it's no surprise that it has bug where the flow through
several goto jumps then fails to clean up context from a non-obvious
logic path. CLean up the logic flow and make sure every path does
the right thing.
Reported-by: Alexander Y. Fomichev <git.user@gmail.com>
Tested-by: Alexander Y. Fomichev <git.user@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200981
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[hch: slight refactor]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We've had a few reports of lockdep tripping over memory reclaim
context vs filesystem freeze "deadlocks". They all have looked
to be false positives on analysis, but it seems that they are
being tripped because we take freeze references before we run
a GFP_KERNEL allocation for the struct xfs_trans.
We can avoid this false positive vector just by re-ordering the
operations in xfs_trans_alloc(). That is. we need allocate the
structure before we take the freeze reference and enter the GFP_NOFS
allocation context that follows the xfs_trans around. This prevents
lockdep from seeing the GFP_KERNEL allocation inside the transaction
context, and that prevents it from triggering the freeze level vs
alloc context vs reclaim warnings.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The xfs_buf_log_item structure has a reference counter with slightly
tricky semantics. In the common case, a buffer is logged and
committed in a transaction, committed to the on-disk log (added to
the AIL) and then finally written back and removed from the AIL. The
bli refcount covers two potentially overlapping timeframes:
1. the bli is held in an active transaction
2. the bli is pinned by the log
The caveat to this approach is that the reference counter does not
purely dictate the lifetime of the bli. IOW, when a dirty buffer is
physically logged and unpinned, the bli refcount may go to zero as
the log item is inserted into the AIL. Only once the buffer is
written back can the bli finally be freed.
The above semantics means that it is not enough for the various
refcount decrementing contexts to release the bli on decrement to
zero. xfs_trans_brelse(), transaction commit (->iop_unlock()) and
unpin (->iop_unpin()) must all drop the associated reference and
make additional checks to determine if the current context is
responsible for freeing the item.
For example, if a transaction holds but does not dirty a particular
bli, the commit may drop the refcount to zero. If the bli itself is
clean, it is also not AIL resident and must be freed at this time.
The same is true for xfs_trans_brelse(). If the transaction dirties
a bli and then aborts or an unpin results in an abort due to a log
I/O error, the last reference count holder is expected to explicitly
remove the item from the AIL and release it (since an abort means
filesystem shutdown and metadata writeback will never occur).
This leads to fairly complex checks being replicated in a few
different places. Since ->iop_unlock() and xfs_trans_brelse() are
nearly identical, refactor the logic into a common helper that
implements and documents the semantics in one place. This patch does
not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_trans_brelse() is a bit of a historical mess, similar to
xfs_buf_item_unlock(). It is unnecessarily verbose, has snippets of
commented out code, inconsistency with regard to stale items, etc.
Clean up xfs_trans_brelse() to use similar logic and flow as
xfs_buf_item_unlock() with regard to bli reference count handling.
This patch makes no functional changes, but facilitates further
refactoring of the common bli reference count handling code.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfstests generic/388,475 occasionally reproduce assertion failures
in xfs_buf_item_unpin() when the final bli reference is dropped on
an invalidated buffer and the buffer is not locked as it is expected
to be. Invalidated buffers should remain locked on transaction
commit until the final unpin, at which point the buffer is removed
from the AIL and the bli is freed since stale buffers are not
written back.
The assert failures are associated with filesystem shutdown,
typically due to log I/O errors injected by the test. The
problematic situation can occur if the shutdown happens to cause a
race between an active transaction that has invalidated a particular
buffer and an I/O error on a log buffer that contains the bli
associated with the same (now stale) buffer.
Both transaction and log contexts acquire a bli reference. If the
transaction has already invalidated the buffer by the time the I/O
error occurs and ends up aborting due to shutdown, the transaction
and log hold the last two references to a stale bli. If the
transaction cancel occurs first, it treats the buffer as non-stale
due to the aborted state: the bli reference is dropped and the
buffer is released/unlocked. The log buffer I/O error handling
eventually calls into xfs_buf_item_unpin(), drops the final
reference to the bli and treats it as stale. The buffer wasn't left
locked by xfs_buf_item_unlock(), however, so the assert fails and
the buffer is double unlocked. The latter problem is mitigated by
the fact that the fs is shutdown and no further damage is possible.
->iop_unlock() of an invalidated buffer should behave consistently
with respect to the bli refcount, regardless of aborted state. If
the refcount remains elevated on commit, we know the bli is awaiting
an unpin (since it can't be in another transaction) and will be
handled appropriately on log buffer completion. If the final bli
reference of an invalidated buffer is dropped in ->iop_unlock(), we
can assume the transaction has aborted because invalidation implies
a dirty transaction. In the non-abort case, the log would have
acquired a bli reference in ->iop_pin() and prevented bli release at
->iop_unlock() time. In the abort case the item must be freed and
buffer unlocked because it wasn't pinned by the log.
Rework xfs_buf_item_unlock() to simplify the currently circuitous
and duplicate logic and leave invalidated buffers locked based on
bli refcount, regardless of aborted state. This ensures that a
pinned, stale buffer is always found locked when eventually
unpinned.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Now that deferred operations are completely managed via
transactions, it's no longer necessary to cancel the dfops in error
paths that already cancel the associated transaction. There are a
few such calls lingering throughout the codebase.
Remove all remaining unnecessary calls to xfs_defer_cancel(). This
leaves xfs_defer_cancel() calls in two places. The first is the call
in the transaction cancel path itself, which facilitates this patch.
The second is made via the xfs_defer_finish() error path to provide
consistent error semantics with transaction commit. For example,
xfs_trans_commit() expects an xfs_defer_finish() failure to clean up
the dfops structure before it returns.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The VFS routine that calls ->get_link blindly copies whatever's returned
into the user's buffer. If we return a NULL pointer, the vfs will
crash on the null pointer. Therefore, return -EFSCORRUPTED instead of
blowing up the kernel.
[dgc: clean up with hch's suggestions]
Reported-by: wen.xu@gatech.edu
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This contains two new features:
1) Stack file operations: this allows removal of several hacks from the
VFS, proper interaction of read-only open files with copy-up,
possibility to implement fs modifying ioctls properly, and others.
2) Metadata only copy-up: when file is on lower layer and only metadata is
modified (except size) then only copy up the metadata and continue to
use the data from the lower file.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCW3srhAAKCRDh3BK/laaZ
PC6tAQCP+KklcN+TvNp502f+O/kATahSpgnun4NY1/p4I8JV+AEAzdlkTN3+MiAO
fn9brN6mBK7h59DO3hqedPLJy2vrgwg=
=QDXH
-----END PGP SIGNATURE-----
Merge tag 'ovl-update-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs updates from Miklos Szeredi:
"This contains two new features:
- Stack file operations: this allows removal of several hacks from
the VFS, proper interaction of read-only open files with copy-up,
possibility to implement fs modifying ioctls properly, and others.
- Metadata only copy-up: when file is on lower layer and only
metadata is modified (except size) then only copy up the metadata
and continue to use the data from the lower file"
* tag 'ovl-update-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (66 commits)
ovl: Enable metadata only feature
ovl: Do not do metacopy only for ioctl modifying file attr
ovl: Do not do metadata only copy-up for truncate operation
ovl: add helper to force data copy-up
ovl: Check redirect on index as well
ovl: Set redirect on upper inode when it is linked
ovl: Set redirect on metacopy files upon rename
ovl: Do not set dentry type ORIGIN for broken hardlinks
ovl: Add an inode flag OVL_CONST_INO
ovl: Treat metacopy dentries as type OVL_PATH_MERGE
ovl: Check redirects for metacopy files
ovl: Move some dir related ovl_lookup_single() code in else block
ovl: Do not expose metacopy only dentry from d_real()
ovl: Open file with data except for the case of fsync
ovl: Add helper ovl_inode_realdata()
ovl: Store lower data inode in ovl_inode
ovl: Fix ovl_getattr() to get number of blocks from lower
ovl: Add helper ovl_dentry_lowerdata() to get lower data dentry
ovl: Copy up meta inode data from lowest data inode
ovl: Modify ovl_lookup() and friends to lookup metacopy dentry
...
- Fix an uninitialized variable
- Don't use obviously garbage AG header counters to calculate
transaction reservations
- Trigger icount recalculation on bad icount when monting.
-----BEGIN PGP SIGNATURE-----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=+0Eq
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.19-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- Fix an uninitialized variable
- Don't use obviously garbage AG header counters to calculate
transaction reservations
- Trigger icount recalculation on bad icount when mounting
* tag 'xfs-4.19-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: fix WARN_ON_ONCE on uninitialized variable
xfs: sanity check ag header values in xrep_calc_ag_resblks
xfs: recalculate summary counters at mount time if icount is bad
This patch is reworked from an earlier patch that Dan has posted:
https://patchwork.kernel.org/patch/10131727/
VM_MIXEDMAP is used by dax to direct mm paths like vm_normal_page() that
the memory page it is dealing with is not typical memory from the linear
map. The get_user_pages_fast() path, since it does not resolve the vma,
is already using {pte,pmd}_devmap() as a stand-in for VM_MIXEDMAP, so we
use that as a VM_MIXEDMAP replacement in some locations. In the cases
where there is no pte to consult we fallback to using vma_is_dax() to
detect the VM_MIXEDMAP special case.
Now that we have explicit driver pfn_t-flag opt-in/opt-out for
get_user_pages() support for DAX we can stop setting VM_MIXEDMAP. This
also means we no longer need to worry about safely manipulating vm_flags
in a future where we support dynamically changing the dax mode of a
file.
DAX should also now be supported with madvise_behavior(), vma_merge(),
and copy_page_range().
This patch has been tested against ndctl unit test. It has also been
tested against xfstests commit: 625515d using fake pmem created by
memmap and no additional issues have been observed.
Link: http://lkml.kernel.org/r/152847720311.55924.16999195879201817653.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Use extent maps to track pagecache page status instead of bufferhead
state.
- Refactor pagecache read and write paths to use the new iomap library
functions, which enable us to drop the old bufferhead code for
pagesize == blocksize filesystems.
- Set up parallel per-block-per-page metadata to track subpage
information that was tracked by buffer heads, which enables us to drop
the old bufferhead code for pagesize > blocksize filesystems.
- Tie a deferred ops control structure to a transaction so that we can
take advantage of an upper-level dfops without having to plumb pointer
passing through the code.
- Refactor the deferred ops code to track deferred ops as part of the
transaction structure (instead of as a separate data structure) so
that we can simplify the scoping rules around defer_ops.
- Refactor twisty delwri buffer submission code to avoid deadlocks.
- Shorten and fix indenting problems in the scrub code.
- Detect obviously bad summary counts at mount and fix them.
- Directly associate deferred ops control structure with a transaction
so that callers no longer have to manage it themselves.
- Remove a couple of IRIX-era inode macros.
- Remove the long-deprecated 'barrier' and 'nobarrier' mount options.
- Clean up the inode fork structure a bit.
- Check for bad fs summary counter values in the superblock.
- Reduce COW fork lookups during writeback.
- Refactor the deferred ops control structures into the transaction
structure, thereby eliminating the need for transaction users to
handle the deferred ops as a separate data structure.
- Add the ability to repair AG headers online.
- Fix a crash due to insufficient return value checking.
- Various fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=2G+i
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.19-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"This is the second part of the XFS changes for 4.19.
The biggest changes are the removal of buffer heads frm XFS, a massive
reworking of the deferred transaction operations handling code, the
removal of the long defunct barrier/nobarrier mount options, and the
addition of a few more online repair functions.
Summary:
- Use extent maps to track pagecache page status instead of
bufferhead state.
- Refactor pagecache read and write paths to use the new iomap
library functions, which enable us to drop the old bufferhead code
for pagesize == blocksize filesystems.
- Set up parallel per-block-per-page metadata to track subpage
information that was tracked by buffer heads, which enables us to
drop the old bufferhead code for pagesize > blocksize filesystems.
- Tie a deferred ops control structure to a transaction so that we
can take advantage of an upper-level dfops without having to plumb
pointer passing through the code.
- Refactor the deferred ops code to track deferred ops as part of the
transaction structure (instead of as a separate data structure) so
that we can simplify the scoping rules around defer_ops.
- Refactor twisty delwri buffer submission code to avoid deadlocks.
- Shorten and fix indenting problems in the scrub code.
- Detect obviously bad summary counts at mount and fix them.
- Directly associate deferred ops control structure with a
transaction so that callers no longer have to manage it themselves.
- Remove a couple of IRIX-era inode macros.
- Remove the long-deprecated 'barrier' and 'nobarrier' mount options.
- Clean up the inode fork structure a bit.
- Check for bad fs summary counter values in the superblock.
- Reduce COW fork lookups during writeback.
- Refactor the deferred ops control structures into the transaction
structure, thereby eliminating the need for transaction users to
handle the deferred ops as a separate data structure.
- Add the ability to repair AG headers online.
- Fix a crash due to insufficient return value checking.
- Various fixes and cleanups"
* tag 'xfs-4.19-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (155 commits)
xfs: fix a null pointer dereference in xfs_bmap_extents_to_btree
xfs: remove b_last_holder & associated macros
iomap: Switch to offset_in_page for clarity
xfs: Close race between direct IO and xfs_break_layouts()
xfs: repair the AGI
xfs: repair the AGFL
xfs: repair the AGF
xfs: remove dead error handling code in xfs_dquot_disk_alloc()
xfs: use WRITE_ONCE to update if_seq
xfs: fix a comment in xfs_log_reserve
xfs: only validate summary counts on primary superblock
xfs: substitute spaces with tabs
xfs: fold dfops into the transaction
xfs: always defer agfl block frees
xfs: pass transaction to xfs_defer_add()
xfs: replace xfs_defer_ops ->dop_pending with on-stack list
xfs: cancel dfops on xfs_defer_finish() error
xfs: clean out superfluous dfops dop params/vars
xfs: drop dop param from xfs_defer_op_type ->finish_item() callback
xfs: automatic dfops inode relogging
...
Check the values we read in from the AG headers when calculating the
block reservations for a repair transaction. If they're obviously
wrong, substitute worst case assumptions (rather than ENOSPC on a bogus
reservation request).
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Pull fs iomap refactoring from Darrick Wong:
"This is the first part of the XFS changes for 4.19.
Christoph and Andreas coordinated some refactoring work on the iomap
code in preparation for removing buffer heads from XFS and porting
gfs2 to iomap. I'm sending this small pull request ahead of the main
XFS merge to avoid holding up gfs2 unnecessarily"
* 'iomap-4.19-merge' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: add inline data support to iomap_readpage_actor
iomap: support direct I/O to inline data
iomap: refactor iomap_dio_actor
iomap: add initial support for writes without buffer heads
iomap: add an iomap-based readpage and readpages implementation
iomap: add private pointer to struct iomap
iomap: add a page_done callback
iomap: generic inline data handling
iomap: complete partial direct I/O writes synchronously
iomap: mark newly allocated buffer heads as new
fs: factor out a __generic_write_end helper
Pull vfs icache updates from Al Viro:
- NFS mkdir/open_by_handle race fix
- analogous solution for FUSE, replacing the one currently in mainline
- new primitive to be used when discarding halfway set up inodes on
failed object creation; gives sane warranties re icache lookups not
returning such doomed by still not freed inodes. A bunch of
filesystems switched to that animal.
- Miklos' fix for last cycle regression in iget5_locked(); -stable will
need a slightly different variant, unfortunately.
- misc bits and pieces around things icache-related (in adfs and jfs).
* 'work.mkdir' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
jfs: don't bother with make_bad_inode() in ialloc()
adfs: don't put inodes into icache
new helper: inode_fake_hash()
vfs: don't evict uninitialized inode
jfs: switch to discard_new_inode()
ext2: make sure that partially set up inodes won't be returned by ext2_iget()
udf: switch to discard_new_inode()
ufs: switch to discard_new_inode()
btrfs: switch to discard_new_inode()
new primitive: discard_new_inode()
kill d_instantiate_no_diralias()
nfs_instantiate(): prevent multiple aliases for directory inode
Since the sb write verifier trips on bad icounts, we should also force a
mount time recalculation of the summary counters if the icount is bad.
This helps us avoid blowing up at freeze/unmount time when the bad
counter gets written back out.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Fuzzing tool reports a write to null pointer error in the
xfs_bmap_extents_to_btree, fix it by bailing out on encountering
a null pointer.
Signed-off-by: Shan Hai <shan.hai@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The old lock tracking infrastructure in xfs using the b_last_holder
field seems to only be useful if you can get into the system with a
debugger; it seems that the existing tracepoints would be the way to
go these days, and this old infrastructure can be removed.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This patch is the duplicate of ross's fix for ext4 for xfs.
If the refcount of a page is lowered between the time that it is returned
by dax_busy_page() and when the refcount is again checked in
xfs_break_layouts() => ___wait_var_event(), the waiting function
xfs_wait_dax_page() will never be called. This means that
xfs_break_layouts() will still have 'retry' set to false, so we'll stop
looping and never check the refcount of other pages in this inode.
Instead, always continue looping as long as dax_layout_busy_page() gives us
a page which it found with an elevated refcount.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Rebuild the AGI header items with some help from the rmapbt.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Colin Ian King reports that commit 82ff27bc52 ("xfs: automatic dfops
buffer relogging") leaves around some dead error handling code in
xfs_dquot_disk_alloc(). This was discovered via Coverity scan.
Since the associated commit eliminates the act of joining a buffer
to a dfops, this intermediate error state is no longer possible and
the error handling code can be removed. Since the caller cancels the
transaction on error, which cancels the dfops, eliminate the
unnecessary xfs_defer_cancel() call and error handling labels.
Fixes: 82ff27bc52 ("xfs: automatic dfops buffer relogging")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This adds ordering of the updates and makes sure we always see the if_seq
update before the extent tree is modified.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Fix the comment in xfs_log_reserve to avoid confusing.
Signed-of-by: Huang Chong <huang.chong@zte.com.cn>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Skip the summary counter checks for secondary superblocks and inprogress
primary superblocks because mkfs has always written those out with
zeroed summary counters.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Inside xfs_attr_shortform_list removes spaces at the beginnig of the line
and replaces with tabs.
Issue found by checkpatch.
ERROR: code indent should use tabs where possible
Signed-off-by: Thomas Bianchi <thomas.bianchi8@gmail.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
struct xfs_defer_ops has now been reduced to a single list_head. The
external dfops mechanism is unused and thus everywhere a (permanent)
transaction is accessible the associated dfops structure is as well.
Remove the xfs_defer_ops structure and fold the list_head into the
transaction. Also remove the last remnant of external dfops in
xfs_trans_dup().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The AGFL fixup code conditionally defers block frees from the free
list based on whether the current transaction has an associated
xfs_defer_ops structure. Now that dfops is embedded in the
transaction and the internal dfops is used unconditionally, this
invariant is always true.
Remove the now dead logic to check for ->t_dfops in
xfs_alloc_fix_freelist() and unconditionally defer AGFL block frees.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The majority of remaining references to struct xfs_defer_ops in XFS
are associated with xfs_defer_add(). At this point, there are no
more external xfs_defer_ops users left. All instances of
xfs_defer_ops are embedded in the transaction, which means we can
safely pass the transaction down to the dfops add interface.
Update xfs_defer_add() to receive the transaction as a parameter.
Various subsystems implement wrappers to allocate and construct the
context specific data structures for the associated deferred
operation type. Update these to also carry the transaction down as
needed and clean up unused dfops parameters along the way.
This removes most of the remaining references to struct
xfs_defer_ops throughout the code and facilitates removal of the
structure.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[darrick: fix unused variable warnings with ftrace disabled]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The xfs_defer_ops ->dop_pending list is used to track active
deferred operations once intents are logged. These items must be
aborted in the event of an error. The list is populated as intents
are logged and items are removed as they complete (or are aborted).
Now that xfs_defer_finish() cancels on error, there is no need to
ever access ->dop_pending outside of xfs_defer_finish(). The list is
only ever populated after xfs_defer_finish() begins and is either
completed or cancelled before it returns.
Remove ->dop_pending from xfs_defer_ops and replace it with a local
list in the xfs_defer_finish() path. Pass the local list to the
various helpers now that it is not accessible via dfops. Note that
we have to check for NULL in the abort case as the final tx roll
occurs outside of the scope of the new local list (once the dfops
has completed and thus drained the list).
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The current semantics of xfs_defer_finish() require the caller to
call xfs_defer_cancel() on error. This is slightly inconsistent with
transaction commit error handling where a failed commit cleans up
the transaction before returning.
More significantly, the only requirement for exposure of
->dop_pending outside of xfs_defer_finish() is so that
xfs_defer_cancel() can drain it on error. Since the only recourse of
xfs_defer_finish() errors is cancellation, mirror the transaction
logic and cancel remaining dfops before returning from
xfs_defer_finish() with an error.
Beside simplifying xfs_defer_finish() semantics, this ensures that
xfs_defer_finish() always returns with an empty ->dop_pending and
thus facilitates removal of the list from xfs_defer_ops.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The dfops code still passes around the xfs_defer_ops pointer
superfluously in a few places. Clean this up wherever the
transaction will suffice.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The dfops infrastructure ->finish_item() callback passes the
transaction and dfops as separate parameters. Since dfops is always
part of a transaction, the latter parameter is no longer necessary.
Remove it from the various callbacks.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Inodes that are held across deferred operations are explicitly
joined to the dfops structure to ensure appropriate relogging.
While inodes are currently joined explicitly, we can detect the
conditions that require relogging at dfops finish time by inspecting
the transaction item list for inodes with ili_lock_flags == 0.
Replace the xfs_defer_ijoin() infrastructure with such detection and
automatic relogging of held inodes. This eliminates the need for the
per-dfops inode list, replaced by an on-stack variant in
xfs_defer_trans_roll().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Buffers that are held across deferred operations are explicitly
joined to the dfops structure to ensure appropriate relogging.
While buffers are currently joined explicitly, we can detect the
conditions that require relogging at dfops finish time by inspecting
the transaction item list for held buffers.
Replace the xfs_defer_bjoin() infrastructure with such detection and
automatic relogging of held buffers. This eliminates the need for
the per-dfops buffer list, replaced by an on-stack variant in
xfs_defer_trans_roll().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Log items that require relogging during deferred operations
processing are explicitly joined to the associated dfops via the
xfs_defer_*join() helpers. These calls imply that the associated
object is "held" by the transaction such that when rolled, the item
can be immediately joined to a follow up transaction. For buffers,
this means the buffer remains locked and held after each roll. For
inodes, this means that the inode remains locked.
Failure to join a held item to the dfops structure means the
associated object pins the tail of the log while dfops processing
completes, because the item never relogs and is not unlocked or
released until deferred processing completes.
Currently, all buffers that are held in transactions (XFS_BLI_HOLD)
with deferred operations are explicitly joined to the dfops. This is
not the case for inodes, however, as various contexts defer
operations to transactions with held inodes without explicit joins
to the associated dfops (and thus not relogging).
While this is not a catastrophic problem, it is not ideal. Given
that we want to eventually relog such items automatically during
dfops processing, start by explicitly adding these missing
xfs_defer_ijoin() calls. A call is added everywhere an inode is
joined to a transaction without transferring lock ownership and
said transaction runs deferred operations.
All xfs_defer_ijoin() calls will eventually be replaced by automatic
dfops inode relogging. This patch essentially implements the
behavior change that would otherwise occur due to automatic inode
dfops relogging.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The dop_low field enables the low free space allocation mode when a
previous allocation has detected difficulty allocating blocks. It
has historically been part of the xfs_defer_ops structure, which
means if enabled, it remains enabled across a set of transactions
until the deferred operations have completed and the dfops is reset.
Now that the dfops is embedded in the transaction, we can save a bit
more space by using a transaction flag rather than a standalone
boolean. Drop the ->dop_low field and replace it with a transaction
flag that is set at the same points, carried across rolling
transactions and cleared on completion of deferred operations. This
essentially emulates the behavior of ->dop_low and so should not
change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All callers pass ->t_dfops of the associated transactions. Refactor
the helpers to receive the transactions and facilitate further
cleanups between xfs_defer_ops and xfs_trans.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
With no more external dfops users, there is no need for an
xfs_defer_ops cancel wrapper.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Log intent recovery is the last user of an external (on-stack)
dfops. The pattern exists because the dfops is used to collect
additional deferred operations queued during the whole recovery
sequence. The dfops is finished with a new transaction after intent
recovery completes.
We already have a mechanism to create an empty, container-like
transaction to support the scrub infrastructure. We can reuse that
mechanism here to drop the final user of external dfops. This
facilitates folding dfops state (i.e., dop_low) into the
transaction, the elimination of now unused external dfops support
and also eliminates the only caller of __xfs_defer_cancel().
Replace the on-stack dfops with an empty transaction and pass it
around to the various helpers that queue and finish deferred
operations during intent recovery.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The current transaction allocation code conditionally initializes
the ->t_dfops indirection pointer. Transaction commit/cancel check
the validity of the pointer to determine whether to finish/cancel
the internal dfops.
This disallows the ability to use the internal dfops list as a
temporary container (via xfs_trans_alloc_empty()). Refactor
transaction allocation to always initialize ->t_dfops and check
permanent reservation state on transaction commit/cancel.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Before we start processing what we /think/ is a da3 node block, actually
check the magic to make sure that we're looking at a node block. This
way we won't blow the asserts in _node_hdr_from_disk on corrupted
metadata.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Use a local variable for the block magic number checks instead of
abusing blk->magic.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Add a predicate to decide if the log is actively in recovery and use
that instead of open-coding a pagf_init check in the attr leaf verifier.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Move the per-AG busy extent tree initialization to the per-ag structure
initialization since we don't want online repair to leak the old tree.
We only deconstruct the tree at unmount time, so this should be safe.
This also enables us to eliminate the commented out initialization in
the xfsprogs libxfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Used the per-fork sequence counter to avoid lookups in the writeback code
unless the COW fork actually changed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Add a simple 32-bit unsigned integer as the sequence count for
modifications to the extent list in the inode fork. This will be
used to optimize away extent list lookups in the writeback code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Make sure we never try to write the superblock with unknown feature bits
set. We checked those at mount time, so if they're set now then memory
is corrupt.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Add a helper predicate to check the inode count for sanity, then use it
in the superblock write verifier to inspect sb_icount.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Current sb verifier doesn't check bounds on sb_fdblocks and sb_ifree.
Add sanity checks for these parameters.
Signed-off-by: Bill O'Donnell <billodo@redhat.com>
[darrick: port to refactored sb validation predicates]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Split the superblock verifier into the common checks, the read-time
checks, and the write-time check functions. No functional changes, but
we're setting up to add more write-only checks.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
As mentioned previously, the xrep_extent_list basically implements a
bitmap with two functions: set and disjoint union. Rename all these
functions to xfs_bitmap to shorten the name and make it more obvious
what we're doing.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
We have a few places that already check if an inode has actual data in
the COW fork to avoid work on reflink inodes that do not actually have
outstanding COW blocks. There are a few more places that can avoid
working if doing the same check, so add a documented helper for this
condition and use it in all places where it makes sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We only have a few more callers left, so seize the opportunity and kill
it off.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Streamline the code and take advantage of the fact that kmem_realloc
through krealloc will be have like a normal allocation if passing in a
NULL old pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The field is only used for asserts, and to track if we really need to do
realloc when growing the inode fork data. But the krealloc function
already performs this check internally, so there is no need to keep track
of the real allocation size.
This will free space in the inode fork for keeping a sequence counter of
changes to the extent list.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move the xrep_extent_list code into a separate file. Logically, this
data structure is really just a clumsy bitmap, and in the next patch
we'll make this more obvious. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Pass a tranaction pointer through to all helpers that calculate the
per-AG block reservation. Online repair will use this to reinitialize
per-ag reservations while it still holds all the AG headers locked to
the repair transaction.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The barrier mount options have been no-ops and deprecated since
4cf4573 xfs: deprecate barrier/nobarrier mount option
i.e. kernel 4.10 / December 2016, with a stated deprecation schedule
after v4.15. Should be fair game to remove them now.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace the IRELE macro with a proper function so that we can do proper
typechecking and so that we can stop open-coding iput in scrub, which
means that we'll be able to ftrace inode lifetimes going through scrub
correctly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Once xfs_defer_finish() has completed all deferred operations, it
checks the dirty state of the transaction and rolls it once more to
return a clean transaction for the caller. This primarily to cover
the case where repeated xfs_defer_finish() calls are made in a loop
and we need to make sure that the caller starts the next iteration
with a clean transaction. Otherwise we risk transaction reservation
overrun.
This final transaction roll is not required in the transaction
commit path, however, because the transaction is immediately
committed and freed after dfops completion. Refactor the final roll
into a separate helper such that we can avoid it in the transaction
commit path. Lift the dfops reset as well so dfops remains valid
until after the last call to xfs_defer_trans_roll(). The reset is
also unnecessary in the transaction commit path because the
transaction is about to complete.
This eliminates unnecessary regrants of transactions where the
associated transaction roll can be replaced by a transaction commit.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Every caller of xfs_defer_finish() now passes the transaction and
its associated ->t_dfops. The xfs_defer_ops parameter is therefore
no longer necessary and can be removed.
Since most xfs_defer_finish() callers also have to consider
xfs_defer_cancel() on error, update the latter to also receive the
transaction for consistency. The log recovery code contains an
outlier case that cancels a dfops directly without an available
transaction. Retain an internal wrapper to support this outlier case
for the time being.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Each xfs_defer_init() call in the xattr code uses the internal dfops
reference. In addition, a successful xfs_defer_finish() always
returns with a reset xfs_defer_ops structure.
Given that along with the fact that every xfs_defer_init() call in
the xattr code is followed up by an xfs_defer_finish(), the former
calls are no longer necessary and can be removed.
Note that the xfs_defer_init() call in the remote value copy loop of
xfs_attr_rmtval_set() is not followed by a finish, but the dfops is
unused in this instance.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
At this point, the transaction subsystem completely manages deferred
items internally such that the common and boilerplate
xfs_trans_alloc() -> xfs_defer_init() -> xfs_defer_finish() ->
xfs_trans_commit() sequence can be replaced with a simple
transaction allocation and commit.
Remove all such boilerplate deferred ops code. In doing so, we
change each case over to use the dfops in the transaction and
specifically eliminate:
- The on-stack dfops and associated xfs_defer_init() call, as the
internal dfops is initialized on transaction allocation.
- xfs_bmap_finish() calls that precede a final xfs_trans_commit() of
a transaction.
- xfs_defer_cancel() calls in error handlers that precede a
transaction cancel.
The only deferred ops calls that remain are those that are
non-deterministic with respect to the final commit of the associated
transaction or are open-coded due to special handling.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
bmap and refcount intent processing associates a dfops from the
caller with a local transaction to collect all deferred items for
post-processing. Use the internal dfops in both of these functions
and move the deferred items to the parent dfops before the
transaction commits.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove the unnecessary on-stack dfops structure and use the internal
transaction dfops instead. The lower level xattr code already
appropriately accesses ->t_dfops throughout.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All callers either explicitly initialize a dfops or pass a
transaction with an internal dfops. Drop the hacky old dfops
replacement logic and use the one associated with the transaction.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The dfops structure used by multi-transaction operations is
typically stored on the stack and carried around by the associated
transaction. The lifecycle of dfops does not quite match that of the
transaction, but they are tightly related in that the former depends
on the latter.
The relationship of these objects is tight enough that we can avoid
the cumbersome boilerplate code required in most cases to manage
them separately by just embedding an xfs_defer_ops in the
transaction itself. This means that a transaction allocation returns
with an initialized dfops, a transaction commit finishes pending
deferred items before the tx commit, a transaction cancel cancels
the dfops before the transaction and a transaction dup operation
transfers the current dfops state to the new transaction.
The dup operation is slightly complicated by the fact that we can no
longer just copy a dfops pointer from the old transaction to the new
transaction. This is solved through a dfops move helper that
transfers the pending items and other dfops state across the
transactions. This also requires that transaction rolling code
always refer to the transaction for the current dfops reference.
Finally, to facilitate incremental conversion to the internal dfops
and continue to support the current external dfops mode of
operation, create the new ->t_dfops_internal field with a layer of
indirection. On allocation, ->t_dfops points to the internal dfops.
This state is overridden by callers who re-init a local dfops on the
transaction. Once ->t_dfops is overridden, the external dfops
reference is maintained as the transaction rolls.
This patch adds the fundamental ability to support an internal
dfops. All codepaths that perform deferred processing continue to
override the internal dfops until they are converted over in
subsequent patches.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Both structures have holes due to member alignment. Move dop_low to
the end of xfs_defer ops to sanitize the cache line alignment and
move t_flags to save 8 bytes in xfs_trans.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_defer_init() is currently used in two particular situations. The
first and most obvious case is raw initialization of an
xfs_defer_ops struct. The other case is partial reinit of
xfs_defer_ops on reuse due to iteration.
Most instances of the first case will be replaced by a single init
of a dfops embedded in the transaction. Init calls are still
technically required for the second case because the dfops may have
low space mode enabled or have joined items that need to be reset
before the dfops should be reused.
Since the current dfops usage expects either a final transaction
commit after xfs_defer_finish() or xfs_defer_init() if dfops is to
be reused, we can shift some of the init logic into
xfs_defer_finish() such that the latter returns with a reinitialized
dfops. This eliminates the second dependency noted above such that a
dfops is immediately ready for reuse after an xfs_defer_finish()
without the need to change any calling code.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
dop_committed is set when deferred item processing rolls the
transaction at least once, but is only ever accessed in tracepoints.
The transaction roll/commit events are already available via
independent tracepoints, so remove the otherwise unused field.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_defer_finish() has a couple quirks that are not safe with
respect to the upcoming internal dfops functionality. First,
xfs_defer_finish() attaches the passed in dfops structure to
->t_dfops and caches and restores the original value. Second, it
continues to use the initial dfops reference before and after the
transaction roll.
These behaviors assume that dop is an independent memory allocation
from the transaction itself, which may not always be true once
transactions begin to use an embedded dfops structure. In the latter
model, dfops processing creates a new xfs_defer_ops structure with
each transaction and the associated state is migrated across to the
new transaction.
Fix up xfs_defer_finish() to handle the possibility of the current
dfops changing after a transaction roll. Since ->t_dfops is used
unconditionally in this path, it is no longer necessary to
attach/restore ->t_dfops and pass it explicitly down to
xfs_defer_trans_roll(). Update dop in the latter function and the
caller to ensure that it always refers to the current dfops
structure.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The xattr remote value set/remove handlers both clear args.trans in
the error path without having cancelled the transaction. This leaks
the transaction, causes warnings around returning to userspace with
locks held and leads to system lockups or other general problems.
The higher level xfs_attr_[set|remove]() functions already detect
and cancel args.trans when set in the error path. Drop the NULL
assignments from the rmtval handlers and allow the callers to clean
up the transaction correctly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xlog_finish_defer_ops() processes the deferred operations collected
over the entire intent recovery sequence. We can't xfs_defer_init()
here because the dfops is already populated. Attach it manually and
eliminate the last caller of xfs_defer_finish() that doesn't pass
->t_dfops.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_itruncate_extents[_flags]() uses a local dfops with a
transaction provided by the caller. It uses hacky ->t_dfops
replacement logic to avoid stomping over an already populated
->t_dfops.
The latter never occurs for current callers and the logic itself is
not really appropriate. Clean this up by updating all callers to
initialize a dfops and to use that down in xfs_itruncate_extents().
This more closely resembles the upcoming logic where dfops will be
embedded within the transaction. We can also replace the
xfs_defer_init() in the xfs_itruncate_extents_flags() loop with an
assert. Both dfops and firstblock should be in a valid state
after xfs_defer_finish() and the inode joined to the dfops is fixed
throughout the loop.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When inodes are freed in xfs_ifree(), di_flags is cleared (so extent size
hints are removed) but the actual extent size fields are left intact.
This causes the extent hint validators to fail on freed inodes which once
had extent size hints.
This can be observed (for example) by running xfs/229 twice on a
non-crc xfs filesystem, or presumably on V5 with ikeep.
Fixes: 7d71a67 ("xfs: verify extent size hint is valid in inode verifier")
Fixes: 02a0fda ("xfs: verify COW extent size hint is valid in inode verifier")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use the "bad summary count" mount flag from the previous patch to skip
writing the unmount record to force log recovery at the next mount,
which will recalculate the summary counters for us.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Refactor the writing of the unmount record into a separate helper. No
functionality changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Filippo Giunchedi complained that xfs doesn't even perform basic sanity
checks of the fs summary counters at mount time. Therefore, recalculate
the summary counters from the AGFs after log recovery if the counts were
bad (or we had to recover the fs). Enhance the recalculation routine to
fail the mount entirely if the new values are also obviously incorrect.
We use a mount state flag to record the "bad summary count" state so
that the (subsequent) online fsck patches can detect subtlely incorrect
counts and set the flag; clear it userspace asks for a repair; or force
a recalculation at the next mount if nobody fixes it by unmount time.
Reported-by: Filippo Giunchedi <fgiunchedi@wikimedia.org>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we've shortened everything, fix up all the indentation and
whitespace problems. There are no functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Shorten the name of the online fsck context structure. Whitespace
damage will be fixed by a subsequent patch. There are no functional
changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Shorten all the metadata repair xfs_repair_* symbols to xrep_.
Whitespace damage will be fixed by a subsequent patch. There are no
functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Shorten all the metadata checking xfs_scrub_ prefixes to xchk_. After
this, the only xfs_scrub* symbols are the ones that pertain to both
scrub and repair. Whitespace damage will be fixed in a subsequent
patch. There are no functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Less trivial cleanups of the error argument to xfs_btree_del_cursor;
these require some minor code refactoring.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The error argument to xfs_btree_del_cursor already understands the
"nonzero for error" semantics, so remove pointless error testing in the
callers and pass it directly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The following assertion was seen on generic/051:
XFS: Assertion failed: tp->t_firstblock == NULLFSBLOCK, file: fs/xfs/libxfs5
------------[ cut here ]------------
kernel BUG at fs/xfs/xfs_message.c:102!
invalid opcode: 0000 [#1] SMP PTI
CPU: 2 PID: 20757 Comm: fsstress Not tainted 4.18.0-rc4+ #3969
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/4
RIP: 0010:assfail+0x23/0x30
Code: c3 66 0f 1f 44 00 00 48 89 f1 41 89 d0 48 c7 c6 88 e0 8c 82 48 89 fa
RSP: 0018:ffff88012dc43c08 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff88012dc43ca0 RCX: 0000000000000000
RDX: 00000000ffffffc0 RSI: 000000000000000a RDI: ffffffff828480eb
RBP: ffff88012aa92758 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: f000000000000000 R12: 0000000000000000
R13: ffff88012dc43d48 R14: ffff88013092e7e8 R15: 0000000000000014
FS: 00007f8d689b8e80(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8d689c7000 CR3: 000000012ba6a000 CR4: 00000000000006e0
Call Trace:
xfs_defer_init+0xff/0x160
xfs_reflink_remap_extent+0x31b/0xa00
xfs_reflink_remap_blocks+0xec/0x4a0
xfs_reflink_remap_range+0x3a1/0x650
xfs_file_dedupe_range+0x39/0x50
vfs_dedupe_file_range+0x218/0x260
do_vfs_ioctl+0x262/0x6a0
? __se_sys_newfstat+0x3c/0x60
ksys_ioctl+0x35/0x60
__x64_sys_ioctl+0x11/0x20
do_syscall_64+0x4b/0x190
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The root cause of the assertion failure is that xfs_defer_finish doesn't
roll the transaction after processing all the deferred items. Therefore
it returns a dirty transaction to the caller, which leaves the caller at
risk of exceeding the transaction reservation if it logs more items.
Brian Foster's patchset to move the defer_ops firstblock into the
transaction requires t_firstblock == NULLFSBLOCK upon defer_ops
initialization, which is how this was noticed at all.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Check the leaf attribute freemap when we're verifying the block.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
No significant changes, just silence a couple of sparse errors.
Using cpu_to_be32(NULLAGINO), the NULLAGINO constant will be encoded in
BE as a constant, avoiding a BE -> CPU conversion every iteraction of
the loop, if be32_to_cpu(agi->agi_unlinked[i]) was used instead.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Make use of the swap macro and remove unnecessary variable *tmp*. This
makes the code easier to read and maintain. Also, slightly refactor some
code.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Make use of the swap macro and remove some unnecessary variables.
This makes the code easier to read and maintain. Also, reduces the
stack usage.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Make use of the swap macro and remove some unnecessary variables.
This makes the code easier to read and maintain. Also, reduces the
stack usage.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The original rmap code assumed that there would always be at least one
rmap in the rmapbt (the AG sb/agf/agi) and so errored out if it didn't
find one. This assumption isn't true for the rmapbt repair function
(and it won't be true for realtime rmap either), so remove the check and
just deal with the situation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Make sure we initialize *bno and *len, before jumping to out_bad_rec
label, and risk calling xfs_warn() with uninitialized variables.
Coverity: 100898
Coverity: 1437081
Coverity: 1437129
Coverity: 1437191
Coverity: 1437201
Coverity: 1437212
Coverity: 1437341
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that there is only one caller, fold the common submission helper
into __xfs_buf_submit().
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The buffer I/O submission path consists of separate function calls
per type. The buffer I/O type is already controlled via buffer
state (XBF_ASYNC), however, so there is no real need for separate
submission functions.
Combine the buffer submission functions into a single function that
processes the buffer appropriately based on XBF_ASYNC. Retain an
internal helper with a conditional wait parameter to continue to
support batched !XBF_ASYNC submission/completion required by delwri
queues.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
If a delwri queue occurs of a buffer that sits on a delwri queue
wait list, the queue sets _XBF_DELWRI_Q without changing the state
of ->b_list. This occurs, for example, if another thread beats the
current delwri waiter thread to the buffer lock after I/O
completion. Once the waiter acquires the lock, it removes the buffer
from the wait list and leaves a buffer with _XBF_DELWRI_Q set but
not populated on a list. This results in a lost buffer submission
and in turn can result in assert failures due to _XBF_DELWRI_Q being
set on buffer reclaim or filesystem lockups if the buffer happens to
cover an item in the AIL.
This problem has been reproduced by repeated iterations of xfs/305
on high CPU count (28xcpu) systems with limited memory (~1GB). Dirty
dquot reclaim races with an xfsaild push of a separate dquot backed
by the same buffer such that the buffer sits on the reclaim wait
list at the time xfsaild attempts to queue it. Since the latter
dquot has been flush locked but the underlying buffer not submitted
for I/O, the dquot pins the AIL and causes the filesystem to
livelock.
This race is essentially made possible by the buffer lock cycle
involved with waiting on a synchronous delwri queue submission.
Close the race by using synchronous buffer I/O for respective delwri
queue submission. This means the buffer remains locked across the
I/O and so is inaccessible from other contexts while in the
intermediate wait list state. The sync buffer I/O wait mechanism is
factored into a helper such that sync delwri buffer submission and
serialization are batched operations.
Designed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Sync and async buffer submission both do generally similar things
with a couple odd exceptions. Refactor the core buffer submission
code into a common helper to isolate buffer submission from
completion handling of synchronous buffer I/O.
This patch does not change behavior. It is a step towards support
for using synchronous buffer I/O via synchronous delwri queue
submission.
Designed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All but one caller of xfs_defer_init() passes in the ->t_firstblock
of the associated transaction. The one outlier is
xlog_recover_process_intents(), which simply passes a dummy value
because a valid pointer is required. This firstblock variable can
simply be removed.
At this point we could remove the xfs_defer_init() firstblock
parameter and initialize ->t_firstblock directly. Even that is not
necessary, however, because ->t_firstblock is automatically
reinitialized in the new transaction on a transaction roll. Since
xfs_defer_init() should never occur more than once on a particular
transaction (since the corresponding finish will roll it), replace
the reinit from xfs_defer_init() with an assert that verifies the
transaction has a NULLFSBLOCK firstblock.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_refcount_recover_cow_leftovers() has no need for a firstblock
variable and so passes an unrelated xfs_fsblock_t to
xfs_defer_init() to avoid declaring one. Replace this no-op
initialization with ->t_firstblock. This will be optimized away by
the removal of the xfs_defer_init() firstblock param.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The xfs_alloc_arg.firstblock field is used to control the starting
agno for an allocation. The structure already carries a pointer to
the transaction, which carries the current firstblock value.
Remove the field and access ->t_firstblock directly in the
allocation code.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The bmbt cursor private structure has a firstblock field that is
used to maintain locking order on bmbt allocations. The field holds
an actual firstblock value (as opposed to a pointer), so it is
initialized on cursor creation, updated on allocation and then the
value is transferred back to the source before the cursor is
destroyed.
This value is always transferred from and back to the ->t_firstblock
field. Since xfs_btree_cur already carries a reference to the
transaction, we can remove this field from xfs_btree_cur and the
associated copying. The bmbt allocations will update the value in
the transaction directly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The bmap format helpers receive firstblock via ->t_firstblock. Drop
the param and access it directly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The add extent helpers all receive firstblock via ->t_firstblock.
Drop the parameter and access it directly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The xfs_bmalloca.firstblock field carries the firstblock value from
the transaction into the bmap infrastructure. It's initialized in
one place from ->t_firstblock, so drop the field and access
->t_firstblock directly throughout the bmap code.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Also remove the unnecessary xfs_bmap_split_extent_at() parameter.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The only callers pass ->t_firstblock.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All callers pass ->t_firstblock from the current transaction.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All callers pass ->t_firstblock from the current transaction.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Convert all xfs_bunmapi() callers to ->t_firstblock.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Convert all xfs_bmapi_write() users to ->t_firstblock.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Similar to the dirops code, the xattr code uses an on-stack
firstblock variable for the various operations. This code rolls the
underlying transaction in various places, however, which means we
cannot simply replace the local firstblock vars with ->t_firstblock.
Doing so (without further changes) would invalidate the memory
pointed to by xfs_da_args.firstblock as soon as the first
transaction rolls.
To avoid this problem, remove xfs_da_args.firstblock and replace all
such accesses with ->t_firstblock at the same time. This ensures
that accesses to the current firstblock always occur through the
current transaction rather than a potentially invalid xfs_da_args
pointer.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Note that this codepath is a user of struct xfs_da_args. Switch it
over to ->t_firstblock in preparation to remove
xfs_da_args.firstblock.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All callers of the xfs_dir_*() functions pass ->t_firstblock as the
firstblock parameter. Drop the parameter and access ->t_firstblock
directly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Callers of the xfs_dir_*() functions currently pass an on-stack
firstblock variable. While the dirops infrastructure carries a
pointer to this variable, it never rolls the transaction and so it
is safe to use ->t_firstblock instead.
Fix up the various xfs_dir_*() callers to use ->t_firstblock. Also
remove the unnecessary parameter for xfs_cross_rename().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
A firstblock var is typically allocated and initialized along with
xfs_defer_ops structures and passed around independent from the
associated transaction. To facilitate combining the two, add an
optional ->t_firstblock field to xfs_trans that can be used in place
of an on-stack variable.
The firstblock value follows the lifetime of the transaction, so
initialize it on allocation and when a transaction rolls.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_bmapi_write() always expects a valid firstblock pointer. It
immediately dereferences the pointer to help determine how to
initialize the bma.minleft field. The remaining accesses are
related to modifying btree format forks, which is only relevant for
!COW fork callers.
The reflink code passes a NULL transaction to xfs_bmapi_write() in a
couple places that do COW fork unwritten conversion. The purpose of
the firstblock field is to track the first block allocation in the
current transaction, so technically firstblock should not be
required for these callers either.
Tweak xfs_bmapi_write() to initialize the bma correctly without
accessing the firstblock pointer if no transaction is provided in
the first place. Update the reflink callers to pass NULL instead of
otherwise unused firstblock references.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Most callers of xfs_defer_init() immediately attach the dfops
structure to a transaction. Add a transaction parameter to eliminate
much of this boilerplate code. This also helps self-document the
fact that many codepaths now expect a dfops pointer implicitly via
xfs_trans->t_dfops.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use ->t_dfops of the leftover COW reservation cleanup transaction.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use ->t_dfops of the transaction from the caller. Reset it before we
return to avoid leaks of local stack memory.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_swap_extent_rmap() uses a local dfops instance with a
transaction from the caller. Since there is only one caller, pull
the dfops structure into the caller and attach it to the
transaction. This avoids the need to clear ->t_dfops to prevent
invalid stack memory access.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The xfs_btree_cur.bc_private.a.dfops field is only ever initialized
by the refcountbt cursor init function. The only caller of that
function with a non-NULL dfops is from deferred completion context,
which already has attached to ->t_dfops.
In addition to that, the only actual reference of a.dfops is the
cursor duplication function, which means the field is effectively
unused.
Remove the dfops field from the bc_private.a union. Any future users
can acquire the dfops from the transaction. This patch does not
change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All assignments of xfs_btree_cur.bc_private.b.dfops originate from
->t_dfops. Replace accesses of the former with the latter and remove
the unnecessary field. This patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All callers of the various bmap extent helpers now use ->t_dfops.
Remove the unnecessary dfops params and access ->t_dfops directly.
This patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use ->t_dfops for the collapse and insert range transactions. These
are the only callers of the respective bmap helpers, so replace the
unnecessary dfops parameters with direct accesses to ->t_dfops.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that bma.dfops is only assigned from ->t_dfops, replace all
accesses to the former with the latter and remove the unnecessary
field. This patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All xfs_bmapi_remap() callers already use ->t_dfops. Note that
deferred completion context unconditionally sets ->t_dfops if it
hasn't already been set by the caller. Remove the unnecessary
parameter and access ->t_dfops directly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that all xfs_bunmapi() callers use ->t_dfops, remove the
unnecessary parameter and access ->t_dfops directly. This patch does
not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use ->t_dfops for all remaining xfs_bunmapi() callers. This prepares
the latter to no longer require a dfops parameter.
Note that xfs_itruncate_extents_flags() associates a local dfops
with a transaction provided from the caller. Since there are
multiple callers, set and reset ->t_dfops before the function
returns to avoid exposure of stack memory to the caller.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that all callers use ->t_dfops, the xfs_bmapi_write() dfops
parameter is no longer necessary. Remove it and access ->t_dfops
directly. This patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Attach ->t_dfops for all remaining callers of xfs_bmapi_write().
This prepares the latter to no longer require a separate dfops
parameter.
Note that xfs_symlink() already uses ->t_dfops. Fix up the local
references for consistency.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_dquot_disk_alloc() receives a transaction from the caller and
passes a local dfops along to xfs_bmapi_write(). If we attach this
dfops to the transaction, we have to make sure to clear it before
returning to avoid invalid access of stack memory.
Since xfs_qm_dqread_alloc() is the only caller, pull dfops into the
caller and attach it to the transaction to eliminate this pattern
entirely.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that xfs_da_args->dfops is always assigned from a ->t_dfops
pointer (or one that is immediately attached), replace all
downstream accesses of the former with the latter and remove the
field from struct xfs_da_args.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Attach the local dfops to ->t_dfops of the extent split transaction.
Since this is the only caller of xfs_bmap_split_extent_at(), remove
the dfops parameter as well.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that the attribute fork add tx carries dfops along with the
transaction, it is unnecessary to pass it down the stack. Remove the
dfops parameter and access ->t_dfops directly where necessary. This
patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Attach the local dfops to the transaction allocated for xattr add
and remove operations. Add an earlier initialization in
xfs_attr_remove() to ensure the structure is valid if it remains
unused at transaction commit time.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Log recovery passes down a central dfops structure to recovery
handlers for bui and cui log items. Each of these handlers allocates
and commits a transaction and defers any remaining operations to be
completed by the main recovery sequence.
Since dfops outlives the transaction in this context, set and clear
->t_dfops appropriately such that the *_finish_item() paths and
below (i.e., xfs_bmapi*()) can expect to find the dfops in the
transaction without it being committed with the dfops attached. This
is required because transaction commit expects that an associated
dfops is finished and in this context the dfops may be populated at
commit time.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All callers of the directory create, rename and remove interfaces
already associate the dfops with the transaction. Drop the dfops
parameters in these calls in preparation for further cleanups in the
layers below. This patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The inode free callchain starting in xfs_inactive_ifree() already
associates its dfops with the transaction. It still passes the dfops
on the stack down through xfs_difree_inobt(), however.
Clean up the call stack and reference dfops directly from the
transaction. This patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The ->t_agfl_dfops field is currently used to defer agfl block frees
from associated transaction contexts. While all known problematic
contexts have already been updated to use ->t_agfl_dfops, the
broader goal is defer agfl frees from all callers that already use a
deferred operations structure. Further, the transaction field
facilitates a good amount of code clean up where the transaction and
dfops have historically been passed down through the stack
separately.
Rename the field to something more generic to prepare to use it as
such throughout XFS. This patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
A couple COW fork unwritten extent conversion helpers pass an
uninitialized dfops pointer to xfs_bmapi_write(). This does not
cause problems because conversion does not use a transaction or the
dfops structure for the COW fork. Drop the uninitialized usage of
dfops in these codepaths and pass NULL along to xfs_bmapi_write()
instead.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Switch to using the iomap_page structure for checking sub-page uptodate
status and track sub-page I/O completion status, and remove large
quantities of boilerplate code working around buffer heads.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Disable the IOMAP_F_BUFFER_HEAD flag on file systems with a block size
equal to the page size, and deal with pages without buffer heads in
writeback. Thanks to the previous refactoring this is basically trivial
now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Rejuggle how we deal with the different error vs non-error and have
ioends vs not have ioend cases to keep the fast path streamlined, and
the duplicate code at a minimum.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This helper only has two callers, one of them with a constant error
argument. Remove it to make pending changes to the code a little easier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This keeps it in a single place so it can be made otional more easily.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Calculate all information for the bio based on the passed in information
without requiring a buffer_head structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Simplify the way we check for a valid imap - we know we have a valid
mapping after xfs_map_blocks returned successfully, and we know we can
call xfs_imap_valid on any imap, as it will always fail on a
zero-initialized map.
We can also remove the xfs_imap_valid function and fold it into
xfs_map_blocks now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_bmapi_read adds zero value in xfs_map_blocks. Replace it with a
direct call to the low-level extent lookup function.
Note that we now always pass a 0 length to the trace points as we ask
for an unspecified len.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We only have one caller left, and open coding the simple extent list
lookup in it allows us to make the code both more understandable and
reuse calculations and variables already present.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_writepage_map() iterates over the bufferheads on a page to decide
what sort of IO to do and what actions to take. However, when it comes
to reflink and deciding when it needs to execute a COW operation, we no
longer look at the bufferhead state but instead we ignore than and look
up internal state held in the COW fork extent list.
This means xfs_writepage_map() is somewhat confused. It does stuff, then
ignores it, then tries to handle the impedence mismatch by shovelling the
results inside the existing mapping code. It works, but it's a bit of a
mess and it makes it hard to fix the cached map bug that the writepage
code currently has.
To unify the two different mechanisms, we first have to choose a direction.
That's already been set - we're de-emphasising bufferheads so they are no
longer a control structure as we need to do taht to allow for eventual
removal. Hence we need to move away from looking at bufferhead state to
determine what operations we need to perform.
We can't completely get rid of bufferheads yet - they do contain some
state that is absolutely necessary, such as whether that part of the page
contains valid data or not (buffer_uptodate()). Other state in the
bufferhead is redundant:
BH_dirty - the page is dirty, so we can ignore this and just
write it
BH_delay - we have delalloc extent info in the DATA fork extent
tree
BH_unwritten - same as BH_delay
BH_mapped - indicates we've already used it once for IO and it is
mapped to a disk address. Needs to be ignored for COW
blocks.
The BH_mapped flag is an interesting case - it's supposed to indicate that
it's already mapped to disk and so we can just use it "as is". In theory,
we don't even have to do an extent lookup to find where to write it too,
but we have to do that anyway to determine we are actually writing over a
valid extent. Hence it's not even serving the purpose of avoiding a an
extent lookup during writeback, and so we can pretty much ignore it.
Especially as we have to ignore it for COW operations...
Therefore, use the extent map as the source of information to tell us
what actions we need to take and what sort of IO we should perform. The
first step is to have xfs_map_blocks() set the io type according to what
it looks up. This means it can easily handle both normal overwrite and
COW cases. The only thing we also need to add is the ability to return
hole mappings.
We need to return and cache hole mappings now for the case of multiple
blocks per page. We no longer use the BH_mapped to indicate a block over
a hole, so we have to get that info from xfs_map_blocks(). We cache it so
that holes that span two pages don't need separate lookups. This allows us
to avoid ever doing write IO over a hole, too.
Now that we have xfs_map_blocks() returning both a cached map and the type
of IO we need to perform, we can rewrite xfs_writepage_map() to drop all
the bufferhead control. It's also much simplified because it doesn't need
to explicitly handle COW operations. Instead of iterating bufferheads, it
iterates blocks within the page and then looks up what per-block state is
required from the appropriate bufferhead. It then validates the cached
map, and if it's not valid, we get a new map. If we don't get a valid map
or it's over a hole, we skip the block.
At this point, we have to remap the bufferhead via xfs_map_at_offset().
As previously noted, we had to do this even if the buffer was already
mapped as the mapping would be stale for XFS_IO_DELALLOC, XFS_IO_UNWRITTEN
and XFS_IO_COW IO types. With xfs_map_blocks() now controlling the type,
even XFS_IO_OVERWRITE types need remapping, as converted-but-not-yet-
written delalloc extents beyond EOF can be reported at XFS_IO_OVERWRITE.
Bufferheads that span such regions still need their BH_Delay flags cleared
and their block numbers calculated, so we now unconditionally map each
bufferhead before submission.
But wait! There's more - remember the old "treat unwritten extents as
holes on read" hack? Yeah, that means we can have a dirty page with
unmapped, unwritten bufferheads that contain data! What makes these so
special is that the unwritten "hole" bufferheads do not have a valid block
device pointer, so if we attempt to write them xfs_add_to_ioend() blows
up. So we make xfs_map_at_offset() do the "realtime or data device"
lookup from the inode and ignore what was or wasn't put into the
bufferhead when the buffer was instantiated.
The astute reader will have realised by now that this code treats
unwritten extents in multiple-blocks-per-page situations differently.
If we get any combination of unwritten blocks on a dirty page that contain
valid data in the page, we're going to convert them to real extents. This
can actually be a win, because it means that pages with interleaving
unwritten and written blocks will get converted to a single written extent
with zeros replacing the interspersed unwritten blocks. This is actually
good for reducing extent list and conversion overhead, and it means we
issue a contiguous IO instead of lots of little ones. The downside is
that we use up a little extra IO bandwidth. Neither of these seem like a
bad thing given that spinning disks are seek sensitive, and SSDs/pmem have
bandwidth to burn and the lower Io latency/CPU overhead of fewer, larger
IOs will result in better performance on them...
As a result of all this, the only state we actually care about from the
bufferhead is a single flag - BH_Uptodate. We still use the bufferhead to
pass some information to the bio via xfs_add_to_ioend(), but that is
trivial to separate and pass explicitly. This means we really only need
1 bit of state per block per page from the buffered write path in the
writeback path. Everything else we do with the bufferhead is purely to
make the buffered IO front end continue to work correctly. i.e we've
pretty much marginalised bufferheads in the writeback path completely.
Signed-off-By: Dave Chinner <dchinner@redhat.com>
[hch: forward port, refactor and split off bits into other commits]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Calling it file_offset makes the usage more clear, especially with
a new poffset variable that will be added soon for the offset inside
the page.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We can handle the existing cow mapping case as a special case directly
in xfs_writepage_map, and share code for allocating delalloc blocks
with regular I/O in xfs_map_blocks. This means we need to always
call xfs_map_blocks for reflink inodes, but we can still skip most of
the work if it turns out that there is no COW mapping overlapping the
current block.
As a subtle detail we need to start caching holes in the wpc to deal
with the case of COW reservations between EOF. But we'll need that
infrastructure later anyway, so this is no big deal.
Based on a patch from Dave Chinner.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We already have to check for overlapping COW extents everytime we
come back to a page in xfs_writepage_map / xfs_map_cow, so this
additional trim is not required.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We want to be able to use the extent state as a reliably indicator for
the type of I/O, and stop using the buffer head state. For this we
need to stop using the XFS_BMAPI_IGSTATE so that we don't see merged
extents of different types.
Based on a patch from Dave Chinner.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Finding a buffer that isn't uptodate doesn't invalidate the mapping for
any given block. The last_sector check will already take care of starting
another ioend as soon as we find any non-update buffer, and if the current
mapping doesn't include the next uptodate buffer the xfs_imap_valid check
will take care of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We already track the page uptodate status based on the buffer uptodate
status, which is updated whenever reading or zeroing blocks.
This code has been there since commit a ptool commit in 2002, which
claims to:
"merge" the 2.4 fsx fix for block size < page size to 2.5. This needed
major changes to actually fit.
and isn't present in other writepage implementations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Both callers want the same looking, so do it only once.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Instead of looking at the buffer heads to see if a block is delalloc just
call xfs_bmap_punch_delalloc_range on the whole page - this will leave
any non-delalloc block intact and handle the iteration for us. As a side
effect one more place stops caring about buffer heads and we can remove the
xfs_check_page_type function entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
For file systems with a block size that equals the page size we never do
partial reads, so we can use the buffer_head-less iomap versions of
readpage and readpages without conflicting with the buffer_head structures
create later in write_begin.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Clean up f_op->dedupe_file_range() interface.
1) Use loff_t for offsets and length instead of u64
2) Order the arguments the same way as {copy|clone}_file_range().
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Make sure we initialize *bno and *len, before jumping to out_bad_rec
label, and risk calling xfs_warn() with uninitialized variables.
Coverity: 100898
Coverity: 1437081
Coverity: 1437129
Coverity: 1437191
Coverity: 1437201
Coverity: 1437212
Coverity: 1437341
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In __xfs_ag_resv_init we incorrectly calculate the amount by which to
decrease fdblocks when reserving blocks for the rmapbt. Because rmapbt
allocations do not decrease fdblocks, we must decrease fdblocks by the
entire size of the requested reservation in order to achieve our goal of
always having enough free blocks to satisfy an rmapbt expansion.
This is in contrast to the refcountbt/finobt, which /do/ subtract from
fdblocks whenever they allocate a block. For this allocation type we
preserve the existing behavior where we decrease fdblocks only by the
requested reservation minus the size of the existing tree.
This fixes the problem where the available block counts reported by
statfs change across a remount if there had been an rmapbt size change
since mount time.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
If a user asks us to zero_range part of a file, the end of the range is
EOF, and not aligned to a page boundary, invoke writeback of the EOF
page to ensure that the post-EOF part of the page is zeroed. This
ensures that we don't expose stale memory contents via mmap, if in a
clumsy manner.
Found by running generic/127 when it runs zero_range and mapread at EOF
one after the other.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
In commit 8ad560d256 ("xfs: strengthen rtalloc query range checks")
we strengthened the input parameter checks in the rtbitmap range query
function, but introduced an off-by-one error in the process. The call
to xfs_rtfind_forw deals with the high key being rextents, but we clamp
the high key to rextents - 1. This causes the returned results to stop
one block short of the end of the rtdev, which is incorrect.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Initialize the extent count field of the high key so that when we use
the high key to synthesize an 'unknown owner' record (i.e. used space
record) at the end of the queried range we have a field with which to
compute rm_blockcount. This is not strictly necessary because the
synthesizer never uses the rm_blockcount field, but we can shut up the
static code analysis anyway.
Coverity-id: 1437358
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Zorro Lang reports that generic/485 blows an assert on a filesystem with
512 byte blocks. The test tries to fallocate a post-eof extent at the
maximum file size and calls insert range to shift the extents right by
two blocks. On a 512b block filesystem this causes startoff to overflow
the 54-bit startoff field, leading to the assert.
Therefore, always check the rightmost extent to see if it would overflow
prior to invoking the insert range machinery.
Reported-by: zlang@redhat.com
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200137
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
If we somehow end up with a filesystem that has fewer free blocks than
the blocks set aside to avoid ENOSPC deadlocks, it's possible that the
free space calculation in xfs_reserve_blocks will spit out a negative
number (because percpu_counter_sum returns s64). We fail to notice
this negative number and set fdblks_delta to it. Now we increment
fdblocks(!) and the unsigned type of m_resblks means that we end up
setting a ridiculously huge m_resblks reservation.
Avoid this comedy of errors by detecting the negative free space and
returning -ENOSPC.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In commit e89c041338 ("xfs: implement the GETFSMAP ioctl") we
created the ability to obtain empty transactions. These transactions
have no log or block reservations and therefore can't modify anything.
Since they're also NO_WRITECOUNT they can run while the fs is frozen,
so we don't need to WARN_ON about that usage.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When a corrupt inode is detected during xfs_iflush_cluster, we can
get a shutdown ASSERT failure like this:
XFS (pmem1): Metadata corruption detected at xfs_symlink_shortform_verify+0x5c/0xa0, inode 0x86627 data fork
XFS (pmem1): Unmount and run xfs_repair
XFS (pmem1): xfs_do_force_shutdown(0x8) called from line 3372 of file fs/xfs/xfs_inode.c. Return address = ffffffff814f4116
XFS (pmem1): Corruption of in-memory data detected. Shutting down filesystem
XFS (pmem1): xfs_do_force_shutdown(0x1) called from line 222 of file fs/xfs/libxfs/xfs_defer.c. Return address = ffffffff814a8a88
XFS (pmem1): xfs_do_force_shutdown(0x1) called from line 222 of file fs/xfs/libxfs/xfs_defer.c. Return address = ffffffff814a8ef9
XFS (pmem1): Please umount the filesystem and rectify the problem(s)
XFS: Assertion failed: xfs_isiflocked(ip), file: fs/xfs/xfs_inode.h, line: 258
.....
Call Trace:
xfs_iflush_abort+0x10a/0x110
xfs_iflush+0xf3/0x390
xfs_inode_item_push+0x126/0x1e0
xfsaild+0x2c5/0x890
kthread+0x11c/0x140
ret_from_fork+0x24/0x30
Essentially, xfs_iflush_abort() has been called twice on the
original inode that that was flushed. This happens because the
inode has been flushed to teh buffer successfully via
xfs_iflush_int(), and so when another inode is detected as corrupt
in xfs_iflush_cluster, the buffer is marked stale and EIO, and
iodone callbacks are run on it.
Running the iodone callbacks walks across the original inode and
calls xfs_iflush_abort() on it. When xfs_iflush_cluster() returns
to xfs_iflush(), it runs the error path for that function, and that
calls xfs_iflush_abort() on the inode a second time, leading to the
above assert failure as the inode is not flush locked anymore.
This bug has been there a long time.
The simple fix would be to just avoid calling xfs_iflush_abort() in
xfs_iflush() if we've got a failure from xfs_iflush_cluster().
However, xfs_iflush_cluster() has magic delwri buffer handling that
means it may or may not have run IO completion on the buffer, and
hence sometimes we have to call xfs_iflush_abort() from
xfs_iflush(), and sometimes we shouldn't.
After reading through all the error paths and the delwri buffer
code, it's clear that the error handling in xfs_iflush_cluster() is
unnecessary. If the buffer is delwri, it leaves it on the delwri
list so that when the delwri list is submitted it sees a shutdown
fliesystem in xfs_buf_submit() and that marks the buffer stale, EIO
and runs IO completion. i.e. exactly what xfs+iflush_cluster() does
when it's not a delwri buffer. Further, marking a buffer stale
clears the _XBF_DELWRI_Q flag on the buffer, which means when
submission of the buffer occurs, it just skips over it and releases
it.
IOWs, the error handling in xfs_iflush_cluster doesn't need to care
if the buffer is already on a the delwri queue or not - it just
needs to mark the buffer stale, EIO and run completions. That means
we can just use the easy fix for xfs_iflush() to avoid the double
abort.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When the inode is in extent format, it can't have more extents that
fit in the inode fork. We don't currenty check this, and so this
corruption goes unnoticed by the inode verifiers. This can lead to
crashes operating on invalid in-memory structures.
Attempts to access such a inode will now error out in the verifier
rather than allowing modification operations to proceed.
Reported-by: Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix a typedef, add some braces and breaks to shut up compiler warnings]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Instead of using xfs_bmapi_read to find delalloc extents and then punch
them out using xfs_bunmapi, opencode the loop to iterate over the extents
and call xfs_bmap_del_extent_delay directly. This both simplifies the
code and reduces the number of extent tree lookups required.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
For now just limited to blocksize == PAGE_SIZE, where we can simply read
in the full page in write begin, and just set the whole page dirty after
copying data into it. This code is enabled by default and XFS will now
be feed pages without buffer heads in ->writepage and ->writepages.
If a file system sets the IOMAP_F_BUFFER_HEAD flag on the iomap the old
path will still be used, this both helps the transition in XFS and
prepares for the gfs2 migration to the iomap infrastructure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
There were no conflicts between this and the contents of linux-next
until just before the merge window, when we saw multiple problems:
- A minor conflict with my own y2038 fixes, which I could address
by adding another patch on top here.
- One semantic conflict with late changes to the NFS tree. I addressed
this by merging Deepa's original branch on top of the changes that
now got merged into mainline and making sure the merge commit includes
the necessary changes as produced by coccinelle.
- A trivial conflict against the removal of staging/lustre.
- Multiple conflicts against the VFS changes in the overlayfs tree.
These are still part of linux-next, but apparently this is no longer
intended for 4.18 [1], so I am ignoring that part.
As Deepa writes:
The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64 timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual
replacement becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions.
Thomas Gleixner adds:
I think there is no point to drag that out for the next merge window.
The whole thing needs to be done in one go for the core changes which
means that you're going to play that catchup game forever. Let's get
over with it towards the end of the merge window.
[1] https://www.spinics.net/lists/linux-fsdevel/msg128294.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CZX2
-----END PGP SIGNATURE-----
Merge tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground
Pull inode timestamps conversion to timespec64 from Arnd Bergmann:
"This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
As Deepa writes:
'The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64
timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual replacement
becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions'
Thomas Gleixner adds:
'I think there is no point to drag that out for the next merge
window. The whole thing needs to be done in one go for the core
changes which means that you're going to play that catchup game
forever. Let's get over with it towards the end of the merge window'"
* tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
pstore: Remove bogus format string definition
vfs: change inode times to use struct timespec64
pstore: Convert internal records to timespec64
udf: Simplify calls to udf_disk_stamp_to_time
fs: nfs: get rid of memcpys for inode times
ceph: make inode time prints to be long long
lustre: Use long long type to print inode time
fs: add timespec64_truncate()
- Strengthen metadata checking to avoid ASSERTing on bad disk contents
- Validate btree records that are being retrieved for clients
- Strengthen root inode verification
- Convert license blurbs to SPDX tags
- Enable changing DAX flag on directories
- Fix some writeback deadlocks in reflink
- Refactor out some old xfs helpers
- Move type verifiers to a separate file
- Fix some fuzzer crashes
- Various other bug fixes
-----BEGIN PGP SIGNATURE-----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=SD3u
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.18-merge-10' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull more xfs updates from Darrick Wong:
"Here's the second round of patches for XFS for 4.18. Most of the
commits are small cleanups, bug fixes, and continued strengthening of
metadata verifiers; the bulk of the diff is the conversion of the
fs/xfs/ tree to use SPDX tags.
This series has been run through a full xfstests run over the weekend
and through a quick xfstests run against this morning's master, with
no major failures reported.
Summary:
- Strengthen metadata checking to avoid ASSERTing on bad disk
contents
- Validate btree records that are being retrieved for clients
- Strengthen root inode verification
- Convert license blurbs to SPDX tags
- Enable changing DAX flag on directories
- Fix some writeback deadlocks in reflink
- Refactor out some old xfs helpers
- Move type verifiers to a separate file
- Fix some fuzzer crashes
- Various other bug fixes"
* tag 'xfs-4.18-merge-10' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (31 commits)
xfs: update incore per-AG inode count
xfs: replace do_mod with native operations
xfs: don't call xfs_da_shrink_inode with NULL bp
xfs: clean up MIN/MAX
xfs: move various type verifiers to common file
xfs: xfs_reflink_convert_cow() memory allocation deadlock
xfs: setup VFS i_rwsem lockdep state correctly
xfs: fix string handling in label get/set functions
xfs: convert to SPDX license tags
xfs: validate btree records on retrieval
xfs: push corruption -> ESTALE conversion to xfs_nfs_get_inode()
xfs: verify root inode more thoroughly
xfs: verify COW extent size hint is valid in inode verifier
xfs: verify extent size hint is valid in inode verifier
xfs: catch bad stripe alignment configurations
iomap: fsync swap files before iterating mappings
xfs: use xfs_trans_getsb in xfs_sync_sb_buf
xfs: don't assert on corrupted unlinked inode list
xfs: explicitly pass buffer size to xfs_corruption_error
xfs: don't assert when on-disk btree pointers are garbage
...
For whatever reason we never actually update pagi_count (the in-core
perag inode count) when we allocate or free inode chunks. Online scrub
is going to use it, so we need to fix the accounting.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
* DAX broke a fundamental assumption of truncate of file mapped pages.
The truncate path assumed that it is safe to disconnect a pinned page
from a file and let the filesystem reclaim the physical block. With DAX
the page is equivalent to the filesystem block. Introduce
dax_layout_busy_page() to enable filesystems to wait for pinned DAX
pages to be released. Without this wait a filesystem could allocate
blocks under active device-DMA to a new file.
* DAX arranges for the block layer to be bypassed and uses
dax_direct_access() + copy_to_iter() to satisfy read(2) calls.
However, the memcpy_mcsafe() facility is available through the pmem
block driver. In order to safely handle media errors, via the DAX
block-layer bypass, introduce copy_to_iter_mcsafe().
* Fix cache management policy relative to the ACPI NFIT Platform
Capabilities Structure to properly elide cache flushes when they are not
necessary. The table indicates whether CPU caches are power-fail
protected. Clarify that a deep flush is always performed on
REQ_{FUA,PREFLUSH} requests.
-----BEGIN PGP SIGNATURE-----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=4bfw
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"This adds a user for the new 'bytes-remaining' updates to
memcpy_mcsafe() that you already received through Ingo via the
x86-dax- for-linus pull.
Not included here, but still targeting this cycle, is support for
handling memory media errors (poison) consumed via userspace dax
mappings.
Summary:
- DAX broke a fundamental assumption of truncate of file mapped
pages. The truncate path assumed that it is safe to disconnect a
pinned page from a file and let the filesystem reclaim the physical
block. With DAX the page is equivalent to the filesystem block.
Introduce dax_layout_busy_page() to enable filesystems to wait for
pinned DAX pages to be released. Without this wait a filesystem
could allocate blocks under active device-DMA to a new file.
- DAX arranges for the block layer to be bypassed and uses
dax_direct_access() + copy_to_iter() to satisfy read(2) calls.
However, the memcpy_mcsafe() facility is available through the pmem
block driver. In order to safely handle media errors, via the DAX
block-layer bypass, introduce copy_to_iter_mcsafe().
- Fix cache management policy relative to the ACPI NFIT Platform
Capabilities Structure to properly elide cache flushes when they
are not necessary. The table indicates whether CPU caches are
power-fail protected. Clarify that a deep flush is always performed
on REQ_{FUA,PREFLUSH} requests"
* tag 'libnvdimm-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits)
dax: Use dax_write_cache* helpers
libnvdimm, pmem: Do not flush power-fail protected CPU caches
libnvdimm, pmem: Unconditionally deep flush on *sync
libnvdimm, pmem: Complete REQ_FLUSH => REQ_PREFLUSH
acpi, nfit: Remove ecc_unit_size
dax: dax_insert_mapping_entry always succeeds
libnvdimm, e820: Register all pmem resources
libnvdimm: Debug probe times
linvdimm, pmem: Preserve read-only setting for pmem devices
x86, nfit_test: Add unit test for memcpy_mcsafe()
pmem: Switch to copy_to_iter_mcsafe()
dax: Report bytes remaining in dax_iomap_actor()
dax: Introduce a ->copy_to_iter dax operation
uio, lib: Fix CONFIG_ARCH_HAS_UACCESS_MCSAFE compilation
xfs, dax: introduce xfs_break_dax_layouts()
xfs: prepare xfs_break_layouts() for another layout type
xfs: prepare xfs_break_layouts() to be called with XFS_MMAPLOCK_EXCL
mm, fs, dax: handle layout changes to pinned dax mappings
mm: fix __gup_device_huge vs unmap
mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS
...
do_mod() is a hold-over from when we have different sizes for file
offsets and and other internal values for 40 bit XFS filesystems.
Hence depending on build flags variables passed to do_mod() could
change size. We no longer support those small format filesystems and
hence everything is of fixed size theses days, even on 32 bit
platforms.
As such, we can convert all the do_mod() callers to platform
optimised modulus operations as defined by linux/math64.h.
Individual conversions depend on the types of variables being used.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_attr3_leaf_create may have errored out before instantiating a buffer,
for example if the blkno is out of range. In that case there is no work
to do to remove it, and in fact xfs_da_shrink_inode will lead to an oops
if we try.
This also seems to fix a flaw where the original error from
xfs_attr3_leaf_create gets overwritten in the cleanup case, and it
removes a pointless assignment to bp which isn't used after this.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199969
Reported-by: Xu, Wen <wen.xu@gatech.edu>
Tested-by: Xu, Wen <wen.xu@gatech.edu>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Get rid of the MIN/MAX macros and just use the native min/max macros
directly in the XFS code.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
New verification functions like xfs_verify_fsbno() and
xfs_verify_agino() are spread across multiple files and different
header files. They really don't fit cleanly into the places they've
been put, and have wider scope than the current header includes.
Move the type verifiers to a new file in libxfs (xfs-types.c) and
the prototypes to xfs_types.h where they will be visible to all the
code that uses the types.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_reflink_convert_cow() manipulates the incore extent list
in GFP_KERNEL context in the IO submission path whilst holding
locked pages under writeback. This is a memory reclaim deadlock
vector. This code is not in a transaction, so any memory allocations
it makes aren't protected via the memalloc_nofs_save() context that
transactions carry.
Hence we need to run this call under memalloc_nofs_save() context to
prevent potential memory allocations from being run as GFP_KERNEL
and deadlocking.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When lockdep is enabled, it changes the type of the inode i_rwsem
semaphore before unlocking a newly instantiated inode. THere is the
possibility that there is already a waiter on that inode lock by the
time we unlock the new inode, so having lockdep re-initialise the
lock is a vector for trouble.
Avoid this whole situation by setting up the i_rwsem lockdep class
at the same time we set up the XFS inode i_ilock classes and so the
VFS doesn't have to change the lock class itself when it is
potentially unsafe.
This change is necessary because the equivalent fixes to the VFS code
made in commit 1e2e547a93 ("do d_instantiate/unlock_new_inode
combinations safely") are not relevant to XFS as it has it's own
internal inode cache lookup and instantiation routines.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
[sandeen: fix subject, avoid copy-out of uninit data in getlabel]
gcc-8 reports two warnings for the newly added getlabel/setlabel code:
fs/xfs/xfs_ioctl.c: In function 'xfs_ioc_getlabel':
fs/xfs/xfs_ioctl.c:1822:38: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
strncpy(label, sbp->sb_fname, sizeof(sbp->sb_fname));
^
In function 'strncpy',
inlined from 'xfs_ioc_setlabel' at /git/arm-soc/fs/xfs/xfs_ioctl.c:1863:2,
inlined from 'xfs_file_ioctl' at /git/arm-soc/fs/xfs/xfs_ioctl.c:1918:10:
include/linux/string.h:254:9: error: '__builtin_strncpy' output may be truncated copying 12 bytes from a string of length 12 [-Werror=stringop-truncation]
return __builtin_strncpy(p, q, size);
In both cases, part of the problem is that one of the strncpy()
arguments is a fixed-length character array with zero-padding rather
than a zero-terminated string. In the first one case, we also get an
odd warning about sizeof-pointer-memaccess, which doesn't seem right
(the sizeof is for an array that happens to be the same as the second
strncpy argument).
To work around the bogus warning, I use a plain 'XFSLABEL_MAX' for
the strncpy() length when copying the label in getlabel. For setlabel(),
using memcpy() with the correct length that is already known avoids
the second warning and is slightly simpler.
In a related issue, it appears that we accidentally skip the trailing
\0 when copying a 12-character label back to user space in getlabel().
Using the correct sizeof() argument here copies the extra character.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85602
Fixes: f7664b3197 ("xfs: implement online get/set fs label")
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Martin Sebor <msebor@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove the verbose license text from XFS files and replace them
with SPDX tags. This does not change the license of any of the code,
merely refers to the common, up-to-date license files in LICENSES/
This change was mostly scripted. fs/xfs/Makefile and
fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected
and modified by the following command:
for f in `git grep -l "GNU General" fs/xfs/` ; do
echo $f
cat $f | awk -f hdr.awk > $f.new
mv -f $f.new $f
done
And the hdr.awk script that did the modification (including
detecting the difference between GPL-2.0 and GPL-2.0+ licenses)
is as follows:
$ cat hdr.awk
BEGIN {
hdr = 1.0
tag = "GPL-2.0"
str = ""
}
/^ \* This program is free software/ {
hdr = 2.0;
next
}
/any later version./ {
tag = "GPL-2.0+"
next
}
/^ \*\// {
if (hdr > 0.0) {
print "// SPDX-License-Identifier: " tag
print str
print $0
str=""
hdr = 0.0
next
}
print $0
next
}
/^ \* / {
if (hdr > 1.0)
next
if (hdr > 0.0) {
if (str != "")
str = str "\n"
str = str $0
next
}
print $0
next
}
/^ \*/ {
if (hdr > 0.0)
next
print $0
next
}
// {
if (hdr > 0.0) {
if (str != "")
str = str "\n"
str = str $0
next
}
print $0
}
END { }
$
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
So we don't check the validity of records as we walk the btree. When
there are corrupt records in the free space btree (e.g. zero
startblock/length or beyond EOAG) we just blindly use it and things
go bad from there. That leads to assert failures on debug kernels
like this:
XFS: Assertion failed: fs_is_ok, file: fs/xfs/libxfs/xfs_alloc.c, line: 450
....
Call Trace:
xfs_alloc_fixup_trees+0x368/0x5c0
xfs_alloc_ag_vextent_near+0x79a/0xe20
xfs_alloc_ag_vextent+0x1d3/0x330
xfs_alloc_vextent+0x5e9/0x870
Or crashes like this:
XFS (loop0): xfs_buf_find: daddr 0x7fb28 out of range, EOFS 0x8000
.....
BUG: unable to handle kernel NULL pointer dereference at 00000000000000c8
....
Call Trace:
xfs_bmap_add_extent_hole_real+0x67d/0x930
xfs_bmapi_write+0x934/0xc90
xfs_da_grow_inode_int+0x27e/0x2f0
xfs_dir2_grow_inode+0x55/0x130
xfs_dir2_sf_to_block+0x94/0x5d0
xfs_dir2_sf_addname+0xd0/0x590
xfs_dir_createname+0x168/0x1a0
xfs_rename+0x658/0x9b0
By checking that free space records pulled from the trees are
within the valid range, we catch many of these corruptions before
they can do damage.
This is a generic btree record checking deficiency. We need to
validate the records we fetch from all the different btrees before
we use them to catch corruptions like this.
This patch results in a corrupt record emitting an error message and
returning -EFSCORRUPTED, and the higher layers catch that and abort:
XFS (loop0): Size Freespace BTree record corruption in AG 0 detected!
XFS (loop0): start block 0x0 block count 0x0
XFS (loop0): Internal error xfs_trans_cancel at line 1012 of file fs/xfs/xfs_trans.c. Caller xfs_create+0x42a/0x670
.....
Call Trace:
dump_stack+0x85/0xcb
xfs_trans_cancel+0x19f/0x1c0
xfs_create+0x42a/0x670
xfs_generic_create+0x1f6/0x2c0
vfs_create+0xf9/0x180
do_mknodat+0x1f9/0x210
do_syscall_64+0x5a/0x180
entry_SYSCALL_64_after_hwframe+0x49/0xbe
.....
XFS (loop0): xfs_do_force_shutdown(0x8) called from line 1013 of file fs/xfs/xfs_trans.c. Return address = ffffffff81500868
XFS (loop0): Corruption of in-memory data detected. Shutting down filesystem
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In xfs_imap_to_bp(), we convert a -EFSCORRUPTED error to -EINVAL if
we are doing an untrusted lookup. This is done because we need
failed filehandle lookups to report -ESTALE to the caller, and it
does this by converting -EINVAL and -ENOENT errors to -ESTALE.
The squashing of EFSCORRUPTED in imap_to_bp makes it impossible for
for xfs_iget(UNTRUSTED) callers to determine the difference between
"inode does not exist" and "corruption detected during lookup". We
realy need that distinction in places calling xfS_iget(UNTRUSTED),
so move the filehandle error case handling all the way out to
xfs_nfs_get_inode() where it is needed.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When looking up the root inode at mount time, we don't actually do
any verification to check that the inode is allocated and accounted
for correctly in the INOBT. Make the checks on the root inode more
robust by making it an untrusted lookup. This forces the inode
lookup to use the inode btree to verify the inode is allocated
and mapped correctly to disk. This will also have the effect of
catching a significant number of AGI/INOBT related corruptions in
AG 0 at mount time.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There are rules for vald extent size hints. We enforce them when
applications set them, but fuzzers violate those rules and that
screws us over. Validate COW extent size hint rules in the inode
verifier to catch this.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There are rules for vald extent size hints. We enforce them when
applications set them, but fuzzers violate those rules and that
screws us over.
This results in alignment assertion failures when setting up
allocations such as this in direct IO:
XFS: Assertion failed: ap->length, file: fs/xfs/libxfs/xfs_bmap.c, line: 3432
....
Call Trace:
xfs_bmap_btalloc+0x415/0x910
xfs_bmapi_write+0x71c/0x12e0
xfs_iomap_write_direct+0x2a9/0x420
xfs_file_iomap_begin+0x4dc/0xa70
iomap_apply+0x43/0x100
iomap_file_buffered_write+0x62/0x90
xfs_file_buffered_aio_write+0xba/0x300
__vfs_write+0xd5/0x150
vfs_write+0xb6/0x180
ksys_write+0x45/0xa0
do_syscall_64+0x5a/0x180
entry_SYSCALL_64_after_hwframe+0x49/0xbe
And from xfs_db:
core.extsize = 10380288
Which is not an integer multiple of the block size, and so violates
Rule #7 for setting extent size hints. Validate extent size hint
rules in the inode verifier to catch this.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
- Strengthen inode number and structure validation when allocating inodes.
- Reduce pointless buffer allocations during cache miss
- Use FUA for pure data O_DSYNC directio writes
- Various iomap refactorings
- Strengthen quota metadata verification to avoid unfixable broken quota
- Make AGFL block freeing a deferred operation to avoid blowing out
transaction reservations when running complex operations
- Get rid of the log item descriptors to reduce log overhead
- Fix various reflink bugs where inodes were double-joined to
transactions
- Don't issue discards when trimming unwritten extents
- Refactor incore dquot initialization and retrieval interfaces
- Fix some locking problmes in the quota scrub code
- Strengthen btree structure checks in scrub code
- Rewrite swapfile activation to use iomap and support unwritten extents
- Make scrub exit to userspace sooner when corruptions or
cross-referencing problems are found
- Make scrub invoke the data fork scrubber directly on metadata inodes
- Don't do background reclamation of post-eof and cow blocks when the fs
is suspended
- Fix secondary superblock buffer lifespan hinting
- Refactor growfs to use table-dispatched functions instead of long
stringy functions
- Move growfs code to libxfs
- Implement online fs label getting and setting
- Introduce online filesystem repair (in a very limited capacity)
- Fix unit conversion problems in the realtime freemap iteration
functions
- Various refactorings and cleanups in preparation to remove buffer
heads in a future release
- Reimplement the old bmap call with iomap
- Remove direct buffer head accesses from seek hole/data
- Various bug fixes
-----BEGIN PGP SIGNATURE-----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=11pr
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.18-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"New features this cycle include the ability to relabel mounted
filesystems, support for fallocated swapfiles, and using FUA for pure
data O_DSYNC directio writes. With this cycle we begin to integrate
online filesystem repair and refactor the growfs code in preparation
for eventual subvolume support, though the road ahead for both
features is quite long.
There are also numerous refactorings of the iomap code to remove
unnecessary log overhead, to disentangle some of the quota code, and
to prepare for buffer head removal in a future upstream kernel.
Metadata validation continues to improve, both in the hot path
veifiers and the online filesystem check code. I anticipate sending a
second pull request in a few days with more metadata validation
improvements.
This series has been run through a full xfstests run over the weekend
and through a quick xfstests run against this morning's master, with
no major failures reported.
Summary:
- Strengthen inode number and structure validation when allocating
inodes.
- Reduce pointless buffer allocations during cache miss
- Use FUA for pure data O_DSYNC directio writes
- Various iomap refactorings
- Strengthen quota metadata verification to avoid unfixable broken
quota
- Make AGFL block freeing a deferred operation to avoid blowing out
transaction reservations when running complex operations
- Get rid of the log item descriptors to reduce log overhead
- Fix various reflink bugs where inodes were double-joined to
transactions
- Don't issue discards when trimming unwritten extents
- Refactor incore dquot initialization and retrieval interfaces
- Fix some locking problmes in the quota scrub code
- Strengthen btree structure checks in scrub code
- Rewrite swapfile activation to use iomap and support unwritten
extents
- Make scrub exit to userspace sooner when corruptions or
cross-referencing problems are found
- Make scrub invoke the data fork scrubber directly on metadata
inodes
- Don't do background reclamation of post-eof and cow blocks when the
fs is suspended
- Fix secondary superblock buffer lifespan hinting
- Refactor growfs to use table-dispatched functions instead of long
stringy functions
- Move growfs code to libxfs
- Implement online fs label getting and setting
- Introduce online filesystem repair (in a very limited capacity)
- Fix unit conversion problems in the realtime freemap iteration
functions
- Various refactorings and cleanups in preparation to remove buffer
heads in a future release
- Reimplement the old bmap call with iomap
- Remove direct buffer head accesses from seek hole/data
- Various bug fixes"
* tag 'xfs-4.18-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (121 commits)
fs: use ->is_partially_uptodate in page_cache_seek_hole_data
fs: remove the buffer_unwritten check in page_seek_hole_data
fs: move page_cache_seek_hole_data to iomap.c
xfs: use iomap_bmap
iomap: add an iomap-based bmap implementation
iomap: add a iomap_sector helper
iomap: use __bio_add_page in iomap_dio_zero
iomap: move IOMAP_F_BOUNDARY to gfs2
iomap: fix the comment describing IOMAP_NOWAIT
iomap: inline data should be an iomap type, not a flag
mm: split ->readpages calls to avoid non-contiguous pages lists
mm: return an unsigned int from __do_page_cache_readahead
mm: give the 'ret' variable a better name __do_page_cache_readahead
block: add a lower-level bio_add_page interface
xfs: fix error handling in xfs_refcount_insert()
xfs: fix xfs_rtalloc_rec units
xfs: strengthen rtalloc query range checks
xfs: xfs_rtbuf_get should check the bmapi_read results
xfs: xfs_rtword_t should be unsigned, not signed
dax: change bdev_dax_supported() to support boolean returns
...
Use xfs_trans_getsb rather than reaching right in for
mp->m_sb_bp; I think this is more correct, and it facilitates
building this libxfs code in userspace as well.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use the per-ag inode number verifiers to detect corrupt lists and error
out, instead of using ASSERTs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Explicitly pass the buffer length to xfs_corruption_error() instead of
assuming XFS_CORRUPTION_DUMP_LEN so that we avoid dumping off the end
of the buffer.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Don't ASSERT when we encounter bad on-disk btree pointers in the debug
check functions. Log the error to leave breadcrumbs and let the upper
layers deal with it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Instead of ASSERTing on null btree pointers in xfs_btree_ptr_to_daddr,
use the new block number verifiers to ensure that the btree pointer
doesn't point to any sensitive areas (AG headers, past-EOFS) and return
-EFSCORRUPTED if this is the case. Remove the ASSERT because on-disk
corruptions shouldn't trigger ASSERTs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Make xfs_btree_check_ptr a non-debug function and introduce a new _debug
version that only runs when #ifdef DEBUG. This will enable us to reuse
the checking logic with other parts of the btree code.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Create a variant of xfs_dir2_data_freefind that is suitable for use in a
verifier. Because _freefind is called by the verifier, we simply
duplicate the _freefind function, convert the ASSERTs to return
__this_address, and modify the verifier to call our new function. Once
we've made it impossible for directory blocks with bad bestfree data to
make it into the filesystem we can remove the DEBUG code from the
regular _freefind function.
Underlying argument: corruption of on-disk metadata should return
-EFSCORRUPTED instead of blowing ASSERTs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
If we're reading a node in a dir/attr btree and the buffer comes off the
disk with a magic number we don't recognize, don't ASSERT and don't set
a garbage buffer type (0 also triggers ASSERTs). Instead, report the
corruption, release the buffer, and return -EFSCORRUPTED because that's
what the dabtree is -- corrupt.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Don't ASSERT if the short form btree root pointer is zero. Now that we
use xfs_verify_agbno to check all short form btree pointers, we'll let
that log the error and pass it to the upper layers.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
If a btree lookup encounters an empty btree node or an empty btree leaf
on a multi-level btree, that's evidence of a corrupt on-disk btree.
Therefore, we should return -EFSCORRUPTED to the upper levels, not an
ASSERT failure.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Return -EFSCORRUPTED when the bnobt/cntbt return obviously corrupt
values, rather than letting them bounce around in the internal code.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
In xfs_dir2_leaf_addname we ASSERT if the length of the unused space
described by bestfree[0] is less the amount of space we wish to consume.
Immediately after it is a call to xfs_dir2_data_use_free where the
offset parameter is offset of the unused space and the length parameter
is the amount of space we wish to consume. Both values (and the unused
space pointer) are passed into xfs_dir2_data_check_free, which also
validates that the region of unused space is big enough to cover the
space we wish to consume. This is effectively the same check that the
ASSERT covers, and since a check failure results in a corruption message
being logged we can remove the ASSERT.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Don't bother ASSERTing when we're already going to log and return the
corruption status.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
On a directory, the DAX flag is merely a hint that files created in the
directory should have the DAX flag set at creation time. We don't care
if the underlying device supports DAX or not because directory metadata
are always cached in DRAM. We don't care if new files get the flag even
if the device doesn't support DAX because we always check for DAX
support before setting the VFS flag (S_DAX).
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Pull dcache lookup cleanups from Al Viro:
"Cleaning ->lookup() instances up - mostly d_splice_alias() conversions"
* 'work.lookup' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (29 commits)
switch the rest of procfs lookups to d_splice_alias()
procfs: switch instantiate_t to d_splice_alias()
don't bother with tid_fd_revalidate() in lookups
proc_lookupfd_common(): don't bother with instantiate unless the file is open
procfs: get rid of ancient BS in pid_revalidate() uses
cifs_lookup(): switch to d_splice_alias()
cifs_lookup(): cifs_get_inode_...() never returns 0 with *inode left NULL
9p: unify paths in v9fs_vfs_lookup()
ncp_lookup(): use d_splice_alias()
hfsplus: switch to d_splice_alias()
hfs: don't allow mounting over .../rsrc
hfs: use d_splice_alias()
omfs_lookup(): report IO errors, use d_splice_alias()
orangefs_lookup: simplify
openpromfs: switch to d_splice_alias()
xfs_vn_lookup: simplify a bit
adfs_lookup: do not fail with ENOENT on negatives, use d_splice_alias()
adfs_lookup_byname: .. *is* taken care of in fs/namei.c
romfs_lookup: switch to d_splice_alias()
qnx6_lookup: switch to d_splice_alias()
...
The heads of tha AGI unlinked list are only scanned on debug
kernels when the verifier runs. Change that to always scan the heads
and validate that the inode numbers are valid.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Switch to the iomap based bmap implementation to get rid of one of the
last users of xfs_get_blocks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
generic/475 fired an assert failure just after the filesystem was
shut down:
XFS: Assertion failed: fs_is_ok, file: fs/xfs/libxfs/xfs_refcount.c, line: 182
.....
Call Trace:
xfs_refcount_insert+0x151/0x190
xfs_refcount_adjust_extents.constprop.11+0x9c/0x470
xfs_refcount_adjust.constprop.10+0xb0/0x270
xfs_refcount_finish_one+0x25a/0x420
xfs_trans_log_finish_refcount_update+0x2a/0x40
xfs_refcount_update_finish_item+0x35/0xa0
xfs_defer_finish+0x15e/0x4d0
xfs_reflink_remap_extent+0x1bc/0x610
xfs_reflink_remap_blocks+0x6e/0x280
xfs_reflink_remap_range+0x311/0x530
vfs_clone_file_range+0x119/0x200
....
If xfs_btree_insert() returns an error, the corruption check fires
instead of passing the error back the caller. The corruption check
should be after we've checked for an error, not before, thereby
avoiding assert failures if the filesystem shuts down during a
refcount btree record insert.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All the realtime allocation functions deal with space on the rtdev in
units of realtime extents. However, struct xfs_rtalloc_rec confusingly
uses the word 'block' in the name, even though they're really extents.
Fix the naming problem and fix all the unit handling problems in the two
existing users.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Strengthen the rtalloc range query checks to make sure that the keys do
not run off the end of the realtime device inappropriately. Note that
the query range functions require units of rt extents, not blocks,
despite the type name.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
The xfs_rtbuf_get function should check the block mapping it gets back
from bmapi_read. If there are no mappings or the mapping isn't a real
extent, we should return -EFSCORRUPTED rather than trying to read a
garbage value. We also require realtime bitmap blocks to be real,
written allocations.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
xfs_rtword_t is used for bit manipulations in the realtime bitmap file.
Since we're performing bit shifts with this type, we don't want sign
extension and we don't want to be left shifting negative quantities
because that's undefined behavior.
This also shuts up these UBSAN warnings:
UBSAN: Undefined behaviour in fs/xfs/libxfs/xfs_rtbitmap.c:833:48
signed integer overflow:
-2147483648 - 1 cannot be represented in type 'int'
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
The function return values are confusing with the way the function is
named. We expect a true or false return value but it actually returns
0/-errno. This makes the code very confusing. Changing the return values
to return a bool where if DAX is supported then return true and no DAX
support returns false.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Change bdev_dax_supported so it takes a bdev parameter. This enables
multi-device filesystems like xfs to check that a dax device can work for
the particular filesystem. Once that's in place, actually fix all the
parts of XFS where we need to be able to distinguish between datadev and
rtdev.
This patch fixes the problem where we screw up the dax support checking
in xfs if the datadev and rtdev have different dax capabilities.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
[rez: Re-added __bdev_dax_supported() for !CONFIG_FS_DAX cases]
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Convert XFS to embedded bio sets.
Acked-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If one of the backup superblocks is found to differ seriously from
superblock 0, write out a fresh copy from the in-core sb.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add a helper routine to attach quota information to inodes that are
about to undergo repair. If that fails, we need to schedule a
quotacheck for the next mount but allow the corrupted metadata repair to
continue.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add a helper function to help us recover btree roots from the rmap data.
Callers pass in a list of rmap owner codes, buffer ops, and magic
numbers. We iterate the rmap records looking for owner matches, and
then read the matching blocks to see if the magic number & uuid match.
If so, we then read-verify the block, and if that passes then we retain
a pointer to the block with the highest level, assuming that by the end
of the call we will have found the root. This will be used to reset the
AGF/AGI btree root fields during their rebuild procedures.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Now that we've plumbed in the ability to construct a list of dead btree
blocks following a repair, add more helpers to dispose of them. This is
done by examining the rmapbt -- if the btree was the only owner we can
free the block, otherwise it's crosslinked and we can only remove the
rmapbt record.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add some helpers to assemble a list of fs block extents. Generally,
repair functions will iterate the rmapbt to make a list (1) of all
extents owned by the nominal owner of the metadata structure; then they
will iterate all other structures with the same rmap owner to make a
list (2) of active blocks; and finally we have a subtraction function to
subtract all the blocks in (2) from (1), with the result that (1) is now
a list of blocks that were owned by the old btree and must be disposed.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add a pair of helper functions to allocate and initialize fresh btree
roots. The repair functions will use these as part of recreating
corrupted metadata.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
For repairs, we need to reserve at least as many blocks as we think
we're going to need to rebuild the data structure, and we're going to
need some helpers to roll transactions while maintaining locks on the AG
headers so that other threads cannot wander into the middle of a repair.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Grab and hold the per-AG data across a scrub run whenever relevant.
This helps us avoid repeated trips through rcu and the radix tree
in the repair code.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Use new return type vm_fault_t for fault handlers.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In commit a6a781a58b ("xfs: have buffer verifier functions
report failing address") the bad magic number return was ported
incorrectly.
Fixes: a6a781a58b
Reported-by: syzbot+08ab33be0178b76851c8@syzkaller.appspotmail.com
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
