[Why]
Currently we don't explicitly send a request for a minimum PHYCLK, and
we hope that the dependencies other clocks have will raise PHYCLK when
needed.
[How]
- new clk_mgr function to keep track of PHYCLK requirements
- request maximum requirement across all links
- remove PHYCLK from clock state comparator, as it doesn't come from DML
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
VSC infoframe is needed for PSR. Previously only DMCU controller
supported PSR. Now DMUB also implements PSR.
[How]
Remove VSC infoframe dependency on DMCU.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current DAL behaviour is to not send VSIF if mode does not support VRR
(ie. FS range is < 10Hz). However, we should still set FS Native Color
Active bit in some unsupported mode cases.
[How]
Remove check for if VRR is supported before building infopacket.
Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Driver re-initialize registers already set in FW
[How]
Transfer init to FW
Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print scaling parameters as they are calculated in diags.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MMHUB powergating should be disabled on navi12 and enabled on sienna
cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use RREG32_KIQ to read gfx register when try to get gfx/sdma
clockgating state instead of RREG32, as it will result
to system hard hang when GPU is enter into GFXOFF state.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add support for loading ucode with ta_firmware_header_v2_0
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
TMR is required to be destoried with GFX_CMD_ID_DESTROY_TMR while the
system goes to suspend. Otherwise, PSP may return the failure state
(0xFFFF007) on Gfx-2-PSP command GFX_CMD_ID_SETUP_TMR after do multiple
times suspend/resume.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unload ASD function in suspend phase.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Firmware "Selected" state is a transient state - we don't expect to see
it after finishing driver probe, we even have asserts sprinkled over
i915 to confirm whether that's the case.
Unfortunately - we don't handle the transition out of "Selected" in case
of GuC fetch error, leading those asserts to fire when calling
"intel_huc_is_used()".
v2: Add dbg print when moving HuC into error state (Daniele)
Reported-by: Marcin Bernatowicz <marcin.bernatowicz@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Marcin Bernatowicz <marcin.bernatowicz@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708100843.297655-2-michal@hardline.pl
It has been pointed out that information about HuC usage doesn't belong
in guc_info debugfs. Let's move "supported/used/wanted" matrix to a
separate debugfs file, keeping guc_info strictly about GuC.
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lukasz Fiedorowicz <lukasz.fiedorowicz@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708100843.297655-1-michal@hardline.pl
drm_hdcp_check_ksvs_revoked() returns the number of revoked keys and
error codes when the SRM parsing is failed.
Errors in SRM parsing can't affect the HDCP auth, hence with this patch,
I915 will look out for revoked key count alone.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429134555.22106-1-ramalingam.c@intel.com
Add missing pm_runtime_get_sync() into ltdc_crtc_atomic_enable() to
match pm_runtime_put_sync() in ltdc_crtc_atomic_disable(), otherwise
the LTDC might suspend via runtime PM, disable clock, and then fail
to resume later on.
The test which triggers it is roughly -- run qt5 application which
uses eglfs platform and etnaviv, stop the application, sleep for 15
minutes, run the application again. This leads to a timeout waiting
for vsync, because the LTDC has suspended, but did not resume.
Fixes: 35ab6cfbf2 ("drm/stm: support runtime power management")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Yannick Fertré <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
To: dri-devel@lists.freedesktop.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200229221649.90813-1-marex@denx.de
Content Protection property should be updated as per the kernel
internal state. Let's say if Content protection is disabled
by userspace, CP property should be set to UNDESIRED so that
reauthentication will not happen until userspace request it again,
but when kernel disables the HDCP due to any DDI disabling sequences
like modeset/DPMS operation, kernel should set the property to
DESIRED, so that when opportunity arises, kernel will start the
HDCP authentication on its own.
Somewhere in the line, state machine to set content protection to
DESIRED from kernel was broken and IGT coverage was missing for it.
This patch fixes it.
v2:
- Fixing hdcp CP state in connector atomic check function
intel_hdcp_atomic_check(). [Maarten]
This will require to check hdcp->value in intel_hdcp_update_pipe()
in order to avoid enabling hdcp, if it was already enabled.
v3:
- Rebased.
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/350962/?series=72664&rev=2 #v1
Link: https://patchwork.freedesktop.org/patch/359396/?series=72251&rev=3 #v2
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630082048.22308-1-anshuman.gupta@intel.com
The HiSilicon hibmc driver triggers a splat at boot time as below
[ 14.137806] ------------[ cut here ]------------
[ 14.142405] hibmc-drm 0000:0a:00.0: Device has not been registered.
[ 14.148661] WARNING: CPU: 0 PID: 496 at drivers/gpu/drm/drm_fb_helper.c:2233 drm_fbdev_generic_setup+0x15c/0x1b8
[ 14.158787] [...]
[ 14.278307] Call trace:
[ 14.280742] drm_fbdev_generic_setup+0x15c/0x1b8
[ 14.285337] hibmc_pci_probe+0x354/0x418
[ 14.289242] local_pci_probe+0x44/0x98
[ 14.292974] work_for_cpu_fn+0x20/0x30
[ 14.296708] process_one_work+0x1c4/0x4e0
[ 14.300698] worker_thread+0x2c8/0x528
[ 14.304431] kthread+0x138/0x140
[ 14.307646] ret_from_fork+0x10/0x18
[ 14.311205] ---[ end trace a2000ec2d838af4d ]---
This turned out to be due to the fbdev device hasn't been registered when
drm_fbdev_generic_setup() is invoked. Let's fix the splat by moving it down
after drm_dev_register() which will follow the "Display driver example"
documented by commit de99f0600a ("drm/drv: DOC: Add driver example
code").
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200706144713.1123-1-yuzenghui@huawei.com
If system memory is migrated to device private memory and no GPU MMU
page table entry exists, the GPU will fault and call hmm_range_fault()
to get the PFN for the page. Since the .dev_private_owner pointer in
struct hmm_range is not set, hmm_range_fault returns an error which
results in the GPU program stopping with a fatal fault.
Fix this by setting .dev_private_owner appropriately.
Fixes: 08ddddda66 ("mm/hmm: check the device private page owner in hmm_range_fault()")
Cc: stable@vger.kernel.org
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The patch to add zero page migration to GPU memory inadvertently included
part of a future change which broke normal page migration to GPU memory
by copying too much data and corrupting GPU memory.
Fix this by only copying one page instead of a byte count.
Fixes: 9d4296a7d4 ("drm/nouveau/nouveau/hmm: fix migrate zero page to GPU")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tegra TRM says worst-case reply time is 1216us, and this should fix some
spurious timeouts that have been popping up.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Prevents "snd_hda_codec_hdmi hdaudioC1D0: HDMI: pin nid 5 not registered"
that occur on some configurations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
On eviction, we acquire the vm->mutex and then wait on the vma->active.
Therefore when binding and pinning the vma, we must follow the same
sequence, lock/pin the vma then mark it active. Otherwise, we mark the
vma as active, then wait for the vm->mutex, and meanwhile the evictor
holding the mutex waits upon us to complete our activity.
Fixes: 8ccfc20a7d ("drm/i915/gt: Mark ring->vma as active while pinned")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200706170138.8993-1-chris@chris-wilson.co.uk
(cherry picked from commit 8567774e87)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This is new step that was recently added to the combo phy
initialization.
v2:
- using intel_de_rmw()
v3:
- going back to read() modify and write() as group register can't be
read
BSpec: 49291
Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200625195252.39312-1-jose.souza@intel.com
The recent GCC compiler is very picky with the VD_H_START() and
AFBC_DEC_PIXEL_BGN_H() macros, triggering a runtime assert error as:
In function 'meson_overlay_setup_scaler_params',
inlined from 'meson_overlay_atomic_update' at
drivers/gpu/drm/meson/meson_overlay.c:542:2:
./include/linux/compiler.h:392:38: error: call to
'__compiletime_assert_341' declared with attribute error: FIELD_PREP:
value too large for the field
drivers/gpu/drm/meson/meson_overlay.c:413:4: note: in expansion of macro
'AFBC_DEC_PIXEL_BGN_H'
413 | AFBC_DEC_PIXEL_BGN_H(hd_start_lines - afbc_left) |
| ^~~~~~~~~~~~~~~~~~~~
./include/linux/compiler.h:392:38: error: call to
'__compiletime_assert_401' declared with attribute error: FIELD_PREP:
value too large for the field
It's not expected to overflow these fields, but the compiler did
find a case where it overflows.
We can safely ignore this, so mask the value with the field width.
Fixes: e860785d57 ("drm/meson: overlay: setup overlay for Amlogic FBC")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[narmstrong: moved to (value) to avoid precedence issues]
Link: https://patchwork.freedesktop.org/patch/msgid/20200707135009.32474-1-narmstrong@baylibre.com
Looking through the attributes for DMA mappings, it appears that by
default dma_map_sg will try and create a kernel accessible map of the
page. We never access this, as we either have a struct page already or
an iomap, so we can request that the dma mapper does not create one.
Without a kernel map in place, one presumes the rest of the memory
control attributes do not apply. We also explicitly control the caches
around the mappings, so we can ask it not to bother synchronising itself.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200706224308.22636-1-chris@chris-wilson.co.uk
On eviction, we acquire the vm->mutex and then wait on the vma->active.
Therefore when binding and pinning the vma, we must follow the same
sequence, lock/pin the vma then mark it active. Otherwise, we mark the
vma as active, then wait for the vm->mutex, and meanwhile the evictor
holding the mutex waits upon us to complete our activity.
Fixes: 8ccfc20a7d ("drm/i915/gt: Mark ring->vma as active while pinned")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200706170138.8993-1-chris@chris-wilson.co.uk
There's modesetting init code in ast_main.c. Move it to ast_mode.c and
merge it with the modesetting init code in ast_mode_init(). The result
is ast_mode_config_init(), which initalizes the whole modesetting.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-15-tzimmermann@suse.de
Struct ast_crtc has been cleaned up and it's now a wrapper around the
DRM CRTC structure struct drm_crtc. This patch converts the driver to
struct drm_crtc and removes struct ast_crtc.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-13-tzimmermann@suse.de
The cursor helpers reserve buffer objects in VRAM and update their
content. So although tied to modesetting, cursor helpers are more
of a memory manager. The modesetting's cursor plane requires this
functionality, so initialize cursors before modesetting.
While at it, also add an error check for ast_cursor_init().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-12-tzimmermann@suse.de
Register a release function to finalize cursors. The _fini() function
gets un-exported from the source file.
The function ast_mode_fini() is now empty and will be removed by a
later patch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-11-tzimmermann@suse.de
Updating the image in a cursor's HW BO requires a mapping of the BO's
buffer in the kernel's address space. Cursor image updates can happen
frequently and create CPU overhead.
As cursor HW BOs are small and never move, they are now map exactly
once during the initialization and the mapping is used throughout the
driver's lifetime.
This change also removes a possible source of failures from
ast_cursor_show(). As the helper does not establish mappings, it cannot
fail. As a result, the cursor plane's atomic-update helper does not
call any failable interfaces. All failures are detected before trying
to update the cursor plane.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-10-tzimmermann@suse.de
Having a cursor move function is misleading, as it actually enables the
cursor's image for displaying. So rename it to ast_cursor_show(). It's
semantics is to show a cursor at the specified location on the screen.
The displayed cursor is always the image in the cursor front BO.
This change also simplifies struct ast_crtc to being a mere wrapper around
around struct drm_crtc. It will be removed by a later patch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-7-tzimmermann@suse.de
The new helper ast_cursor_blit() updates a cursor's backbuffer HW
BO from a framebuffer structure. The cursor plane's prepare_fb()
function now uses the new interface.
Pinning and mapping of BOs is done automatically by the helper. This
includes the source BO, which was not pinned by the original code in
prepare_fb().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-4-tzimmermann@suse.de
The TXP so far has been leveraging the PixelValve infrastructure in the
driver, that was really two things: the interaction with DRM's CRTC
concept, the setup of the underlying pixelvalve and the setup of the shared
HVS, the pixelvalve part being irrelevant to the TXP since it accesses the
HVS directly.
Now that we have a clear separation between the three parts, we can
represent the TXP as a CRTC of its own, leveraging the common CRTC and HVS
code, but leaving aside the pixelvalve setup.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20f387f881b57f3474fa42d94cfd8bc1b7b80595.1591882579.git-series.maxime@cerno.tech
The vc4_crtc_data structure is currently storing data related to both the
general CRTC information needed by the rest of the vc4 driver (like HVS
output and available FIFOs) and some related to the pixelvalve attached to
that CRTC. Let's split this into two structures so that we can reuse the
CRTC part into the TXP later on.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/8eb317c91ac208d7f926d76ad421002fa0364c47.1591882579.git-series.maxime@cerno.tech
The CRTC in vc4 is backed by two devices, the HVS that does the composition
and the PixelValve that does the timing generation.
The writeback is kind of a special case since it doesn't have an associated
pixelvalve but goes straight from the HVS to the TXP. Therefore, it makes
sense to move out the HVS setup code into helpers so that we can also reuse
them from the TXP driver.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/96443394e81429ee38f070cfe231701b07e56d69.1591882579.git-series.maxime@cerno.tech
The VC4_SET_FIELD and VC4_GET_FIELD are reimplementing most of the logic
already defined in FIELD_SET and FIELD_GET. Let's convert the vc4 macros to
use the FIELD_* macros.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703135713.985810-1-maxime@cerno.tech
Not only do we need to release the vm.ref we acquired for the vma on the
duplicate insert branch, but also for the normal error paths, so roll
them all into one.
Reported-by: Andi Shyti <andi.shyti@intel.com>
Suggested-by: Andi Shyti <andi.shyti@intel.com>
Fixes: 2850748ef8 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702211015.29604-1-chris@chris-wilson.co.uk
(cherry picked from commit 03fca66b7a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As we allow for parallel threads to create the same vma instance
concurrently, and we only filter out the duplicates upon reacquiring the
spinlock for the rbtree, we have to free the loser of the constructors'
race. When freeing, we should also drop any resource references acquired
for the redundant vma.
Fixes: 2850748ef8 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702083225.20044-1-chris@chris-wilson.co.uk
(cherry picked from commit 2377427cdd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The current fence_y_offset calculation is broken. I think it more or
less used to do the right thing, but then I changed the plane code
to put the final x/y source offsets back into the src rectangle so
now it's just subtraacting the same value from itself. The code would
never have worked if we allowed the framebuffer to have a non-zero
offset.
Let's do this in a better way by just calculating the fence_y_offset
from the final plane surface offset. Note that we don't align the
plane surface address to fence rows so with horizontal panning there's
often a horizontal offset from the fence start to the surface address
as well. We have no way to tell the hardware about that so we just
ignore it. Based on some quick tests the invlidation still happens
correctly. I presume due to the invalidation nuking at least the full
line (or a segment of multiple lines).
Fixes: 54d4d719fa ("drm/i915: Overcome display engine stride limits via GTT remapping")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-4-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 5331889b5f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fix typo: "TRIGER" --> "TRIGGER"
The two misplelled macros:
1) OAREPORTTRIG1_EDGE_LEVEL_TRIGER_SELECT_MASK
2) OAREPORTTRIG5_EDGE_LEVEL_TRIGER_SELECT_MASK
are not used in any other sources of the kernel,
so this change can be consider only a local change
for the i915_reg.h file.
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703125046.8395-1-f.suligoi@asem.it
It is not really unexpected to hit wedge on init this way.
We're already downgrading error printk when running with fault injection,
let's use the same approach for CI tainting.
v2: Don't check fault inject in trace dump (Chris)
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200706144107.204821-3-michal@hardline.pl
We can add taint from multiple places, printing the caller allows us to
have a better overview of what exactly caused us to do the tainting.
v2: Tweak format and print the device (Chris)
v3: Move things around (Chris)
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200706144107.204821-2-michal@hardline.pl
Getting wedged device on driver init is pretty much unrecoverable.
Since we're running various scenarios that may potentially hit this in
CI (module reload / selftests / hotunplug), and if it happens, it means
that we can't trust any subsequent CI results, we should just apply the
taint to let the CI know that it should reboot (CI checks taint between
test runs).
v2: Comment that WEDGED_ON_INIT is non-recoverable, distinguish
WEDGED_ON_INIT from WEDGED_ON_FINI (Chris)
v3: Appease checkpatch, fixup search-replace logic expression mindbomb
in assert (Chris)
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200706144107.204821-1-michal@hardline.pl
The initial CI results did not include a TGL system which includes a
panel that is having issues with patch. Revert while we triage.
This reverts commit 680c45c767.
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702230957.30536-1-matthew.s.atwood@intel.com
code refactoring for hibmc_drv_vdac.c, no actual function changes.
v2:
remove the debug message.
v3:
embedding connector and encoder in struct hibmc_drm_private.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1593680081-60313-1-git-send-email-tiantao6@hisilicon.com
Use the drm_bridge_connector helper to create a connector for pipelines
that use drm_bridge. This allows splitting connector operations across
multiple bridges when necessary, instead of having the last bridge in
the chain creating the connector and handling all connector operations
internally.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Replace the manual panel handling code by a drm_panel_bridge. This
simplifies the driver and allows all components in the display pipeline
to be treated as bridges, paving the way to generic connector handling.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
The mtk_dsi driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Convert mtk_dsi to a bridge driver with built-in encoder support for
compatibility with existing component drivers.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
This is really a cosmetic change just to make a bit more readable the
code after convert the driver to drm_bridge. The bridge variable name
will be used by the encoder drm_bridge, and the chained bridge will be
named next_bridge.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Equivalent information can be nowadays obtained using function tracer
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
There are some `static const u8` variables that are not used, this
triggers a warning building with `make W=1`, it is safe to remove them,
so do it and make the compiler more happy.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
The driver will be loaded by via a platform device. So we
will need to get the device_node from the parent device.
Depending on this we will set the driver data.
As all this is done later already, just delete the call to
of_device_get_match_data.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
In function mtk_dsi_clk_hs_state, remove unnecessary conversion
to bool return, this change is to make the code a bit readable.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reuse the ppgtt_bind_vma() for aliasing_ppgtt_bind_vma() so we can
reduce some code near-duplication. The catch is that we need to then
pass along the i915_address_space and not rely on vma->vm, as they
differ with the aliasing-ppgtt.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703102519.26539-1-chris@chris-wilson.co.uk
Normally i85x/i865 3D activity will block FBC until a 2D blit
occurs. I suppose this was meant to avoid recompression while
3D activity is still going on but the frame hasn't yet been
presented. Unfortunately that also means that a page flipped
3D workload will permanently block FBC even if it only renders
a single frame and then does nothing.
Since we are using software render tracking anyway we might as
well flip the chicken bit so that 3D does not block FBC. This
will avoid the permament FBC blockage in the aforemention use
case, but thanks to the software tracking the compressor will
not disturb 3D rendering activity.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702153723.24327-5-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Unlike all the other pre-snb desktop platforms i865 actually
supports FBC. Let's enable it.
Quote from the spec:
"DevSDG provides the same Run-Length Encoded Frame Buffer
Compression (RLEFBC) function as exists in DevMGM."
As i865 only has the one pipe we want to skip massaging the
plane<->pipe assignment aimed at getting FBC+LVDS working on
the mobile platforms.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702153723.24327-4-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The MSG_FBC_REND_STATE register only exists on snb+. For older
platforms (would also work for snb+) we can simply rewite DSPSURF
to trigger a flip nuke.
While generally RMW is considered harmful we'll use it here for
simplicity. And since FBC doesn't exist in i830 we don't have to
worry about the DSPSURF double buffering hardware fails present
on that platform.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702153723.24327-3-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Consult the actual plane stride instead of the fb stride. The two
will disagree when we remap the gtt. The plane stride is what the
hw will be fed so that's what we should look at for the FBC
retrictions/cfb allocation.
Since we no longer require a fence we are going to attempt using
FBC with remapping, and so we should look at correct stride.
With 90/270 degree rotation the plane stride is stored in units
of pixels, so we need to conver it to bytes for the purposes
of calculating the cfb stride. Not entirely sure if this matches
the hw behaviour though. Need to reverse engineer that at some
point...
We also need to reorder the pixel format check vs. stride check
to avoid triggering a spurious WARN(stride & 63) with cpp==1 and
plane stride==32.
v2: Try to deal with rotated stride and related WARN
Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: 691f7ba58d ("drm/i915/display/fbc: Make fences a nice-to-have for GEN9+")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702153723.24327-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
We still need "Bump up CDCLK" workaround otherwise getting
underruns - however currently it blocks 8K as CDCLK = Pixel rate,
in 8K case would require CDCLK to be around 1 Ghz which is not
possible.
v2: - Convert to expression(max(min_cdclk, min(pixel_rate, max_cdclk))
(Ville Syrjälä)
- Use type specific min_t, max_t(Ville Syrjälä)
Fixes: 46d53e271c ("Revert "drm/i915: Remove unneeded hack now for CDCLK"")
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702091526.10096-1-stanislav.lisovskiy@intel.com
The information about platform/driver/user view of GuC firmware usage
currently requires user to either go through kernel log or parse the
combination of "enable_guc" modparam and various debugfs entries.
Let's keep things simple and add a "supported/used/wanted" matrix
(already used internally by i915) in guc_info debugfs.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lukasz Fiedorowicz <lukasz.fiedorowicz@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lukasz Fiedorowicz <lukasz.fiedorowicz@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701142752.419878-1-michal@hardline.pl
Since gen8 we don't use swizzle anymore. Don't dump registers related to
it: registers may or may not be there.
v2: pull the rest of driver state reporting before the read out (Chris)
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702200714.1278-1-lucas.demarchi@intel.com
Rather than reuse the common ctx->mutex for locking the execbuffer LUT,
split it into its own lock to avoid being taken [as part of ctx->mutex]
at inappropriate times. In particular to avoid the inversion from taking
the timeline->mutex for the whole execbuf submission in the next patch.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703004306.11117-1-chris@chris-wilson.co.uk
Since the VD1 Amlogic FBC decoder is now configured by the overlay driver,
commit the right registers to decode the Amlogic FBC frame.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703080728.25207-7-narmstrong@baylibre.com
Setup the Amlogic FBC decoder for the VD1 video overlay plane to use
read the FBC header as Scatter Memory layout reference.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703080728.25207-6-narmstrong@baylibre.com
Setup the Amlogic FBC decoder for the VD1 video overlay plane to use
a different superblock size for the Memory Saving mode.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703080728.25207-5-narmstrong@baylibre.com
Setup the Amlogic FBC decoder for the VD1 video overlay plane.
The VD1 Amlogic FBC decoder is integrated in the pipeline like the
YUV pixel reading/formatter but used a direct memory address instead.
This adds support for the basic layout, and needs to calculate the content
body size since the header is allocated after.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703080728.25207-4-narmstrong@baylibre.com
Not only do we need to release the vm.ref we acquired for the vma on the
duplicate insert branch, but also for the normal error paths, so roll
them all into one.
Reported-by: Andi Shyti <andi.shyti@intel.com>
Suggested-by: Andi Shyti <andi.shyti@intel.com>
Fixes: 2850748ef8 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702211015.29604-1-chris@chris-wilson.co.uk
Since we no longer always take struct_mutex around everything, and want
the freedom to create GEM objects, actually taking struct_mutex inside
the lock creation ends up pulling the mutex inside other looks. Since we
don't use generally use struct_mutex, we can relax the tainting.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702083225.20044-3-chris@chris-wilson.co.uk
Avoid waking up the device and taking stale locks if we know that the
object is not currently mmapped. This is particularly useful as not many
object are actually mmapped and so we can destroy them without waking
the device up, and gives us a little more freedom of workqueue ordering
during shutdown.
v2: Pull the release_mmap() into its single user in freeing the objects,
where there can not be any race with a concurrent user of the freed
object. Or so one hopes!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>,
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>,
Link: https://patchwork.freedesktop.org/patch/msgid/20200702163623.6402-2-chris@chris-wilson.co.uk
Only a GGTT mmapping will use the aperture detiling registers, so on a
tiling change for an object, we only need to revoke those mmappings and
not the CPU mmappings (which are always linear irrespective of the tiling).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702163623.6402-1-chris@chris-wilson.co.uk
We have a mix of dport, intel_dport, intel_dig_port and dig_port to
reference a intel_digital_port struct. Numbers are around
5 intel_dport
36 dport
479 intel_dig_port
352 dig_port
Since we already removed the intel_ prefix from most of our other
structs, do the same here and prefer dig_port.
v2: rename everything in i915, not just a few display sources and
reword commit message (from Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701045054.23357-1-lucas.demarchi@intel.com
Now also comes with the added benefit of doing a drm_crtc_vblank_off(),
which means vblank state isn't ill-defined and fail-y at driver load
before the first modeset on each crtc.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612160056.2082681-5-daniel.vetter@ffwll.ch
Now also comes with the added benefit of doing a drm_crtc_vblank_off(),
which means vblank state isn't ill-defined and fail-y at driver load
before the first modeset on each crtc.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200612160056.2082681-3-daniel.vetter@ffwll.ch
Now also comes with the added benefit of doing a drm_crtc_vblank_off(),
which means vblank state isn't ill-defined and fail-y at driver load
before the first modeset on each crtc.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Mikita Lipski <mikita.lipski@amd.com>
Cc: Stylon Wang <stylon.wang@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612160056.2082681-2-daniel.vetter@ffwll.ch
Only when vblanks are supported ofc.
Some drivers do this already, but most unfortunately missed it. This
opens up bugs after driver load, before the crtc is enabled for the
first time. syzbot spotted this when loading vkms as a secondary
output. Given how many drivers are buggy it's best to solve this once
and for all in shared helper code.
Aside from moving the few existing calls to drm_crtc_vblank_reset into
helpers (i915 doesn't use helpers, so keeps its own) I think the
regression risk is minimal: atomic helpers already rely on drivers
calling drm_crtc_vblank_on/off correctly in their hooks when they
support vblanks. And driver that's failing to handle vblanks after
this is missing those calls already, and vblanks could only work by
accident when enabling a CRTC for the first time right after boot.
Big thanks to Tetsuo for helping track down what's going wrong here.
There's only a few drivers which already had the necessary call and
needed some updating:
- komeda, atmel and tidss also needed to be changed to call
__drm_atomic_helper_crtc_reset() intead of open coding it
- tegra and msm even had it in the same place already, just code
motion, and malidp already uses __drm_atomic_helper_crtc_reset().
- Laurent noticed that rcar-du and omap open-code their crtc reset and
hence would actually be broken by this patch now. So fix them up by
reusing the helpers, which brings the drm_crtc_vblank_reset() back.
Only call left is in i915, which doesn't use drm_mode_config_reset,
but has its own fastboot infrastructure. So that's the only case where
we actually want this in the driver still.
I've also reviewed all other drivers which set up vblank support with
drm_vblank_init. After the previous patch fixing mxsfb all atomic
drivers do call drm_crtc_vblank_on/off as they should, the remaining
drivers are either legacy kms or legacy dri1 drivers, so not affected
by this change to atomic helpers.
v2: Use the drm_dev_has_vblank() helper.
v3: Laurent pointed out that omap and rcar-du used drm_crtc_vblank_off
instead of drm_crtc_vblank_reset. Adjust them too.
v4: Laurent noticed that rcar-du and omap open-code their crtc reset
and hence would actually be broken by this patch now. So fix them up
by reusing the helpers, which brings the drm_crtc_vblank_reset() back.
v5: also mention rcar-du and ompadrm in the proper commit message
above (Laurent).
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://syzkaller.appspot.com/bug?id=0ba17d70d062b2595e1f061231474800f076c7cb
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot+0871b14ca2e2fb64f6e3@syzkaller.appspotmail.com
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: "James (Qian) Wang" <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mihail Atanassov <mihail.atanassov@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: zhengbin <zhengbin13@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-tegra@vger.kernel.org
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612160056.2082681-1-daniel.vetter@ffwll.ch
The variable result is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Large clock values may overflow and show up as negative.
Reported by prOMiNd on IRC.
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for integrated_system_info table v12. Use the actual
v12 structure.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Renoir uses integrated_system_info table v12. The table
has the same layout as v11 with respect to this data. Just
reuse the existing code for v12 for stable.
Fixes incorrectly reported vram info in the driver output.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the compile error below:
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c: In function 'smu_v11_0_init_microcode':
>> arch/arc/include/asm/bug.h:22:2: error: implicit declaration of function 'pr_warn'; did you mean 'pci_warn'? [-Werror=implicit-function-declaration]
22 | pr_warn("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
| ^~~~~~~
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:176:3: note: in expansion of macro 'BUG'
176 | BUG();
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Changes that are fast don't require updating DLG parameters making
this call unnecessary. Considering this is an expensive call it should
not be done on every flip.
DML touches clocks, p-state support, DLG params and a few other DC
internal flags and these aren't expected during fast. A hang has been
reported with this change when called on every flip which suggests that
modifying these fields is not recommended behavior on fast updates.
[How]
Guard the validation to only happen if update type isn't FAST.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1191
Fixes: a24eaa5c51 ("drm/amd/display: Revalidate bandwidth before commiting DC updates")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's otherwise properly supported, just needs exposing to userspace.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for GWS in Arcturus, which needs MEC2 firmware #48
or above. Fix the MEC2 version check for Vega 10 GWS support,
since Vega 10 firmware adds 0x8000 to the actual firmware
revision. We were previously declaring support where it did not
exist.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 2eee0229f6.
Fallback to a stable base until we have a correct new one
Signed-off-by:Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
issue:
originally we kickoff IB test asynchronously with driver's
init, thus
the IB test may still running when the driver loading
done (modprobe amdgpu done).
if we shutdown VM immediately after amdgpu driver
loaded then GPU may
hang because the IB test is still running
fix:
flush the delayed_init routine at the bottom of device_init
to avoid driver loading done prior to the IB test completes
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update PROCESS_QUANTUM, the time the hardware scheduler allows
processes to run before switching to other processes when it becomes
over-subscribed. Increase this to 10ms, to allow processes to better
amortize their task switch times.
Update HQD Quantum, the amount of time that an active queue stays
attached to the CP before we forcibly switch it for another active
queue for fairness.
Setting these so that HQD < PROCESS makes it easier to ensure that
we get fairness when we have multiple active queues on the device.
Otherwise we may start process-swapping before we get to all the
queues in a CP.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In case of certain display configurations we want to allow max detile
buffer utilization by using 4 to 1 mpc combine
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Register key for AE or QA do regression test. New edid status for
check.
[How]
Add register key edid_read_retry_times.
Add new edid status EDID_FALL_BACK.
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Header Changes]
- Add command for notification of active streams to DMUB
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In cases where refresh range is slightly below 10, FreeSync is not
active or supported. Need to round values before checking refresh range
in order to have FreeSync supported in these cases.
[How]
Remove redundant values and round values before checking valid refresh range.
Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For special DP convert VGA dongle, core_link_read_dpcd for
DP_DOWNSTREAM_PORT_0 always return fail, then dongle_type will be set to
DISPLAY_DONGLE_NONE, which will cause desktop resolution abnormal.
[How]
If dpcd for DP_DOWNSTREAM_PORT_0 read fail, skip set dongle_type =
DISPLAY_DONGLE_NONE.
Signed-off-by: jinlong zhang <jinlong.zhang@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SMU may return error code to driver, but driver only check if response
is OK.
[How]
Check SMU response instead of reg_wait, assert in case of reponse isn't
OK.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to keep the same buffer allocated for use during multiple
hardware initializations.
[How]
- allocate gpu memory buffer on clock manager construct
- free gpu memory buffer on clock manager destruct
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Debug flags are not set by default.
[How]
Set debug flags to 0
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The legacy way to initialize discovery_tmr_size
is using DISCOVERY_TMR_SIZE, while after we reduce
DISCOVERY_TMR_SIZE from 64KB to 4KB, variable
discovery_tmr_size is also reduced to 4KB, this is not
correct, it still should be 64KB, discovery_tmr_size
will be used to calculate ip_discovery reserved mem's
start address and size.
Using DISCOVERY_TMR_OFFSET to init discovery_tmr_size instead.
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To follow conventional style. And this unnecessary "@" confuses
our userspace tool.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update sienna_cichlid driver if header file to match pptable changes.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copy board parameters directly instead of set each parameter for
sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only read first 4K data instead of whole TMR block,
so we can reduce the time in full access mode.
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After we move request full access before set
ip blocks, we can merge atombios init block
of SRIOV and baremetal together.
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
From SIENNA_CICHLID, HW introduce a new protection
feature which can control the FB, doorbell and MMIO
write access for VF, so guest driver should request
full access before ip discovery, or we couldn't access
ip discovery data in FB.
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Init soc15 reg base early enough so we can touch
mailbox related registers in request full access
for sriov before set_ip_blocks, vi&nv arch doesn't
use reg base in virt ops.
v2: fix reg_base_init missed in bare metal case.
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move request init data to virt detection func, so we
can insert request full access between request init data
and set ip blocks.
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When there is no graphics support, KFD can use more of the VMIDs. Graphics
VMIDs are only used for video decoding/encoding and post processing. With
two VCE engines, there is no reason to reserve more than 2 VMIDs for that.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The KFD VMID assignment was hard-coded in a few places. Consolidate that in
a single variable adev->vm_manager.first_kfd_vmid. The value is still
assigned in gmc-ip-version-specific code.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Port functionality from the Radeon driver to support
UVD and VCE power management.
Signed-off-by: Alex Jivin <alex.jivin@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Port functionality from the Radeon driver to support
VCE clock control.
Signed-off-by: Alex Jivin <alex.jivin@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Port functionality from the Radeon driver to support
UVD clock control.
Signed-off-by: Alex Jivin <alex.jivin@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As we allow for parallel threads to create the same vma instance
concurrently, and we only filter out the duplicates upon reacquiring the
spinlock for the rbtree, we have to free the loser of the constructors'
race. When freeing, we should also drop any resource references acquired
for the redundant vma.
Fixes: 2850748ef8 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702083225.20044-1-chris@chris-wilson.co.uk
If the driver gets stuck holding the kernel timeline, we cannot issue a
heartbeat and so fail to discover that the driver is indeed stuck and do
not issue a GPU reset (which would hopefully unstick the driver!).
Switch to using a trylock so that we can query if the heartbeat's
timeline mutex is locked elsewhere, and then use the timer to probe if it
remains stuck at the same spot for consecutive heartbeats, indicating
that the mutex has not been released and the engine has not progressed.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702095219.963-1-chris@chris-wilson.co.uk
The burst length is configured in VIU_OSD1_FIFO_CTRL_STAT[31] and
VIU_OSD1_FIFO_CTRL_STAT[11:10]. The public S905D3 datasheet describes
this as:
- 0x0 = up to 24 per burst
- 0x1 = up to 32 per burst
- 0x2 = up to 48 per burst
- 0x3 = up to 64 per burst
- 0x4 = up to 96 per burst
- 0x5 = up to 128 per burst
The lower two bits map to VIU_OSD1_FIFO_CTRL_STAT[11:10] while the upper
bit maps to VIU_OSD1_FIFO_CTRL_STAT[31].
Replace meson_viu_osd_burst_length_reg() with pre-defined macros which
set these values. meson_viu_osd_burst_length_reg() always returned 0
(for the two used values: 32 and 64 at least) and thus incorrectly set
the burst size to 24.
Fixes: 147ae1cbaa ("drm: meson: viu: use proper macros instead of magic constants")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200620155752.21065-1-martin.blumenstingl@googlemail.com
The old epoch counter was left uninited, so the function returned a
changed state always.
While at it debug print the old epoch counter as well.
Fixes: 35205ee9ba ("drm/i915: Send hotplug event if edid had changed")
Cc: Kunal Joshi <kunal1.joshi@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701180001.15857-1-imre.deak@intel.com
using the new API drmm_kzalloc() instead of devm_kzalloc()
v3:
still fixed include statements sorted alphabetically.
v2:
keep the DRM include statements sorted alphabetically.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1593676183-28525-1-git-send-email-tiantao6@hisilicon.com
amd-drm-next-5.9-2020-07-01:
amdgpu:
- DC DMUB updates
- HDCP fixes
- Thermal interrupt fixes
- Add initial support for Sienna Cichlid GPU
- Add support for unique id on Arcturus
- Major swSMU code cleanup
- Skip BAR resizing if the bios already did id
- Fixes for DCN bandwidth calculations
- Runtime PM reference count fixes
- Add initial UVD support for SI
- Add support for ASSR on eDP links
- Lots of misc fixes and cleanups
- Enable runtime PM on vega10 boards that support BACO
- RAS fixes
- SR-IOV fixes
- Use IP discovery table on renoir
- DC stream synchronization fixes
amdkfd:
- Track SDMA usage per process
- Fix GCC10 compiler warnings
- Locking fix
radeon:
- Default to on chip GART for AGP boards on all arches
- Runtime PM reference count fixes
UAPI:
- Update comments to clarify MTYPE
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701155041.1102829-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
intel_dp_set_source_rates() calls intel_dp_is_edp(), which is unsafe to
use before encoder_type is set. This caused GEN11+ to incorrectly strip
HBR3 from source rates for edp. Move intel_dp_set_source_rates() to
after encoder_type is set. Add comment to intel_dp_is_edp() describing
unsafe usages.
v2: Alter intel_dp_set_source_rates final position (Ville/Manasi).
Remove outdated comment (Ville).
Slight optimization of control flow in intel_dp_init_connector.
Slight rewording in commit message.
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630233310.10191-1-matthew.s.atwood@intel.com
Large clock values may overflow and show up as negative.
Reported by prOMiNd on IRC.
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Renoir uses integrated_system_info table v12. The table
has the same layout as v11 with respect to this data. Just
reuse the existing code for v12 for stable.
Fixes incorrectly reported vram info in the driver output.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The reset pin is inverted, so if we don't assert reset, the actual gpio
will be high and may keep driving the IO port of the panel.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-12-megous@megous.com
The datasheet suggests to issue sleep in after display off
as a part of the panel's shutdown sequence.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-11-megous@megous.com
Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI LCD panel used in
PinePhone. Add support for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-10-megous@megous.com
Calling sleep out and display on is a controller specific part
of the initialization process. Move it out of the panel specific
initialization function to the enable callback.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-9-megous@megous.com
It's better than having it spread around the driver.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-8-megous@megous.com
Parametrize the driver so that it can support more panels based
on st7703 controller.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-7-megous@megous.com
This is done so that code that's not specific to a particular
jh057n panel is named after the controller. Functions specific
to the panel are kept named after the panel.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-6-megous@megous.com
This rename is done so that the driver matches the name of the
display controller and in preparation for adding support for more
panels to the driver.
This is just a basic file rename, with no code changes.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-5-megous@megous.com
'level' here means the highest level we can't use, so when checking
the fbc watermarks we need a -1 to get at the last enabled level.
While at if refactor the code a bit to declutter
g4x_compute_pipe_wm().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-12-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
To simplify things, call the combo PHY/TBT PLL calculation functions
directly from the corresponding combo/TypeC PLL get functions, instead of
calling the same calculation functions after having to recheck if the
given PHY is combo or TypeC.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629185848.20550-2-imre.deak@intel.com
When the reference clock is 38.4MHz, using the current TBT PLL
fractional divider value results in a slightly off TBT link frequency.
This causes an endless loop of link training success followed by a bad
link signaling and retraining at least on a Dell WD19TB TBT dock. The
workaround provided by the HW team is to divide the fractional divider
value by two. This fixed the link training problem on the ThinkPad dock.
The same workaround is needed on some EHL platforms and for combo PHY
PLLs, these will be addressed in a follow-up.
Bspec: 49204
References: HSDES#22010772725
References: HSDES#14011861142
Reported-and-tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629185848.20550-1-imre.deak@intel.com
The obj->lut_list is traversed when the object is closed as the file
table is destroyed during process termination. As this occurs before we
kill any outstanding context if, due to some bug or another, the closure
is blocked, then we fail to shootdown any inflight operations
potentially leaving the GPU spinning forever. As we only need to guard
the list against concurrent closures and insertions, the hold is short
and merits being treated as a simple spinlock.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701084439.17025-1-chris@chris-wilson.co.uk
Replace all uses of the legacy drm_bus_flags with their relevant
_SAMPLE_ variant.
This is a 1:1 replacement, no effort was made to validate the actual
bus flags for the panels.
Note:
DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE
DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_POSEDGE
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630180545.1132217-6-sam@ravnborg.org
Drop use of the legacy drm_bus_flags member and use the more descriptive
_SAMPLE_ variant.
No functional change.
Note:
DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630180545.1132217-5-sam@ravnborg.org
Replace the legacy member with the more descriptive _DRIVE_ variant.
No functional change.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630180545.1132217-3-sam@ravnborg.org
When graph isn't defined in a device-tree, the of_graph_get_remote_node()
prints a noisy error message, telling that port node is not found. This is
undesirable behaviour in our case because absence of a panel/bridge graph
is a valid case. Let's check the graph's presence in a device-tree before
proceeding with parsing of the graph.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701074232.13632-3-digetx@gmail.com
I updated my system with Radeon VII from kernel 5.6 to kernel 5.7, and
following started to happen on each boot:
...
BUG: kernel NULL pointer dereference, address: 0000000000000128
...
CPU: 9 PID: 1940 Comm: modprobe Tainted: G E 5.7.2-200.im0.fc32.x86_64 #1
Hardware name: System manufacturer System Product Name/PRIME X570-P, BIOS 1407 04/02/2020
RIP: 0010:lock_bus+0x42/0x60 [amdgpu]
...
Call Trace:
i2c_smbus_xfer+0x3d/0xf0
i2c_default_probe+0xf3/0x130
i2c_detect.isra.0+0xfe/0x2b0
? kfree+0xa3/0x200
? kobject_uevent_env+0x11f/0x6a0
? i2c_detect.isra.0+0x2b0/0x2b0
__process_new_driver+0x1b/0x20
bus_for_each_dev+0x64/0x90
? 0xffffffffc0f34000
i2c_register_driver+0x73/0xc0
do_one_initcall+0x46/0x200
? _cond_resched+0x16/0x40
? kmem_cache_alloc_trace+0x167/0x220
? do_init_module+0x23/0x260
do_init_module+0x5c/0x260
__do_sys_init_module+0x14f/0x170
do_syscall_64+0x5b/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
...
Error appears when some i2c device driver tries to probe for devices
using adapter registered by `smu_v11_0_i2c_eeprom_control_init()`.
Code supporting this adapter requires `adev->psp.ras.ras` to be not
NULL, which is true only when `amdgpu_ras_init()` detects HW support by
calling `amdgpu_ras_check_supported()`.
Before 9015d60c9e, adapter was registered by
-> amdgpu_device_ip_init()
-> amdgpu_ras_recovery_init()
-> amdgpu_ras_eeprom_init()
-> smu_v11_0_i2c_eeprom_control_init()
after verifying that `adev->psp.ras.ras` is not NULL in
`amdgpu_ras_recovery_init()`. Currently it is registered
unconditionally by
-> amdgpu_device_ip_init()
-> pp_sw_init()
-> hwmgr_sw_init()
-> vega20_smu_init()
-> smu_v11_0_i2c_eeprom_control_init()
Fix simply adds HW support check (ras == NULL => no support) before
calling `smu_v11_0_i2c_eeprom_control_{init,fini}()`.
Please note that there is a chance that similar fix is also required for
CHIP_ARCTURUS. I do not know whether any actual Arcturus hardware without
RAS exist, and whether calling `smu_i2c_eeprom_init()` makes any sense
when there is no HW support.
Cc: stable@vger.kernel.org
Fixes: 9015d60c9e ("drm/amdgpu: Move EEPROM I2C adapter to amdgpu_device")
Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
Tested-by: Bjorn Nostvold <bjorn.nostvold@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The failures with ROCm only happen with noretry=1, so
enable runtime pm when noretry=0 (the current default).
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a switch statement to simplify asic checks. Note
that BACO is not supported on APUs, so there is no
need to check them.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The release_firmware() function is NULL tolerant so we do not need
to check for NULL param before calling it.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is an off-by-one bounds check on the index into arrays
table->mc_reg_address and table->mc_reg_table_entry[k].mc_data[j] that
can lead to reads and writes outside of arrays. Fix the bound checking
off-by-one error.
Addresses-Coverity: ("Out-of-bounds read/write")
Fixes: cc8dbbb4f6 ("drm/radeon: add dpm support for CI dGPUs (v2)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the cases where adev->jpeg.num_jpeg_inst is zero or the condition
adev->jpeg.harvest_config & (1 << i) is always non-zero the variable
ret is never set to an error condition and the function returns
an uninitialized value in ret. Since the only exit condition at
the end if the function is a success then explicitly return
0 rather than a potentially uninitialized value in ret.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 14f43e8f88 ("drm/amdgpu: move JPEG2.5 out from VCN2.5")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This includes older APUs like renoir.
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make sure we pass through ret label to unlock the mutex.
Signed-off-by: John van der Kamp <sjonny@suffe.me.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function kobject_init_and_add alloc memory like:
kobject_init_and_add->kobject_add_varg->kobject_set_name_vargs
->kvasprintf_const->kstrdup_const->kstrdup->kmalloc_track_caller
->kmalloc_slab, in err branch this memory not free. If use
kmemleak, this path maybe catched.
These changes are to add kobject_put in kobject_init_and_add
failed branch, fix potential memleak.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clk_s is checked twice in a row in ni_init_smc_spll_table().
fb_div should be checked instead.
Fixes: 69e0b57a91 ("drm/radeon/kms: add dpm support for cayman (v5)")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes incorrect output when reading pp_dpm_dcefclk sysfs.
Output before this patch:
cat /sys/devices/pci0000:<snip>/pp_dpm_dcefclk
0: 506Mhz
1: 42949671Mhz *
2: 1266Mhz
v2: squash in arcturus fix
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If (smu)->ppt_funcs->intf is not initialized then
smu_send_smc_msg(smu, SMU_MSG_ReadSerialNumBottom32, &bottom32) and
smu_send_smc_msg(smu, SMU_MSG_ReadSerialNumTop32, &top32) will not
touch bottom32 and top32.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Regression was introduced where setting max bpc property has no effect
on the atomic check and final commit. It has the same effect as max bpc
being stuck at 8.
[How]
Correctly propagate max bpc with the new connector state.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Header Changes]
- Add debug flag for psr to use hw locking mgr state machine
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
DP link layer CTS specs updated to change the test parameters in test
4.2.1.1.
Before it requires source to delay 400us on aux no reply.
With the specs updates Errata5, it requires source to delay 3.2ms
(based on LTTPR aux timeout)
This causes our test to fail after updating with the latest test
equipment firmware.
[how]
the change is to allow LTTPR 3.2ms aux timeout delay by default.
And set back to 400us if LTTPR feature is not enabled.
We will set 3.2ms and always enable LTTPR non transparent mode
if LTTPR feature is enabled and LTTPR is present.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Two issues:
1. Add read only operation support for query ddc data over aux.
2. Fix a bug where if read size is multiple of 16,
mot of the last read transaction will not be set to 0.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If the front porch of the two timings differ, then there may not be
enough time while both streams are in vertical blank to perform a memory
clock change. This can hang the system.
[How]
Check the each streams timing.v_front_porch when determining if the two
streams are synchronizable.
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why:
seamless boots requires split of init_hw into hw and pipes to work. This
was implemented in dcn10_init_hw but did not apply yet to dcn30.
how:
Copy over dcn10_init_hw and adapt it to dcn30 using recent changes to
dcn3. Behavior will be different in init sequence.
Signed-off-by: Martin Leung <martin.leung@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We try to to change new_clocks->dppclk_khz to 100000 when
new_clocks->dppclk_khz is 0
[How]
Don't change new_clocks->dppclk_khz value when new_clocks->dppclk_khz is
0
Signed-off-by: Peikang Zhang <peikang.zhang@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
10K YCbCr420 does not need ODM 4:1, but it requires MPC 4 split
indicated on the flags.
[How]
Make pixel encoding and resolution size specific workaround to enable
ODM combine on YCbCr420 high resolution modes.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
If a typeC to HDMI dongle supports YCbCr420 pass through and VSC
colorimetry and pixel encoding formats in the Extended Receiver
Capability, we shall allow VSC SDP to be used.
[How]
The Extended Receiver Capability field shall check the
EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT bit in the
TRAINING_AUX_RD_INTERVAL register. Removed DPCD rev checking for VSC
SDP.
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DMCUB firmware version is now available from firmware metadata block.
We should be passing this into dmub_srv so we can know when to apply
firmware version specific functionality like using CW4 only instead
of the REGION4.
[How]
We don't have the helpers for DM to actually extract out firmware
metadata block themselves.
We could add that and add helpers in DM to grab this, but not every
creation sequence has firmware instruction before dmub_srv_create.
Easiest way to handle this is to fill this in automatically per DM in
the place we do have it - when calculating the region parameters. But
only fill it in if DM already hasn't in case we need to override with
a specific version.
We aren't do anything firmware version specific in dmub_srv_create
today that does require fw_version, so while it's a little unituitive
to do it when calculating region parameters it works for now.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Connector property output_bpc is available on DP/eDP only. New IGT tests
would benifit if this property works on HDMI.
[How]
Enable this read-only property on all types of connectors.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
All YCbCr420 resolutions 5K and above have tiling and discoloration
issues. The issue can be remedied by forcing ODM combine from 5K to 8K.
10K resolution requires ODM 4:1. The mechanism of what the real problem
is, that is inherent in ODM combine programming, doesn't seem to be
pointed at singular register programming (CLK, MPC, DCSURF, etc.), and
needs more in-depth programming sequence review for these new use case
scenarios. Until then, workaround to enable ODM combine is proposed.
While it is not our policy, HW spreadsheet also recommends turning on
ODM for these scenario to lower the voltage.
[How]
Make pixel encoding and resolution size specific workaround to enable
ODM combine on YCbCr420 high resolution modes.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is using pixelclk AVFS for dppclk, that would cause issue.
[How]
To use dispclk AVFS for both dispclk and dppclk. There would choose
dppclk for request voltage when dispclk wouldn't be updated case. If
dispclk need to be updated, then it'll choose the bigger one from dppclk
and dispclk for request voltage.
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If optimized init is done in FW. DCN init be skipped in driver. This
need to be communicated between driver and fw and maintain backwards
compatibility.
[How]
Use DMUB scratch 0 bit 2 to indicate optimized init done in fw and
use DMUB scatch 4 bit 0 to indicate drive supports the optimized flow
so FW will perform it.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Check max_tmds_clk_mhz firstly will restrict pixel clock under HDMI
1.4, thus HDMI2.0 port can't correctly support 4K 60Hz.
[HOW]
Fine tune the logic to check max_forum_tmds_clk_mhz firstly.
Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Need to check if local_sink is NULL before accessing.
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DC global validation can fail when userspace requests to draw large
plane without performing the clipping themselves.
This is observed in the IGT kms_plane panning tests for 4K displays
where they draw an 8K plane without any clipping while expecting only
the top 4K to be drawn.
[How]
DRM already has helpers to take care of the clipping necessary and to
mark whether a plane is visible or not, so make use of these helpers
in DM before passing the plane to DC.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Header Changes]
- Update scratch information for boot status
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dc_link_set_psr_allow_active() always returns true, even in the case
that PSR is not supported.
[How]
Hook up the return value of dc_link_set_psr_allow_active().
Signed-off-by: Camille Cho <Camille.Cho@amd.com>
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Side-by-side and Top-and-bottom stereo configurations fail DML mode
validation due to Viewport exceeded.
This is because we consider the planes as being pipe split in pipe
population so we end up doubling the viewport width, eg. from 4k to 8k.
[How]
These pipes technically aren't hsplit, so add a check for determining
whether is_hsplit should be set.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
assr is content protection for eDP, in order to use it we need to call
psp ta (dtm)
[How]
We have a enable_assr callback, hook into this and call the correct psp
cmd id to enable assr.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently DC doesn't check requested pixel clock against an EDID
specified TMDS max clock if it exists, passing modes that should fail
[HOW]
Add max TMDS clk to edid caps and perform check during validation
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
dc->hwss->edp_backlight_control is null, it would casue it only be off
main-link of eDP. It is not worng behavior for eDP power sequence off.
[how]
Must use hwseq->funcs.edp_backlight_control finction pointer for edp
backlight.
Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com>
Reviewed-by: Sung Lee <Sung.Lee@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The calculation of virtual channel payload would not take link settings
in account. As we calculate VCPI slots needed both PBN for stream and
also PBN per time slot. Before we would use generic PBN per time slot,
which would not change with link settings causing wrong Payload
allocation.
[how]
Provide PBN per time slot for each Virtual channel payload calculation.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Hw lock manager adds the ability to lock pipe, cursor, and dig in fw.
[How]
Send hw lock command to fw to lock pipe, cursor, and dig.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement SI UVD. The SI UVD firmware requires validation.
v2: squash in missing brace fix (Colin Ian King)
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For implement UVD on SI asic, add Oland, Pitcairn, Verde, Tahiti firmwares.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drop the duplicate register macros from sid.h and use the
standard ones in the oss register headers.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when compiled with allmodconfig option, there are error
messages as below:
ERROR: modpost:
"mod_color_is_table_init"
[drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: modpost:
"mod_color_get_table"
[drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: modpost:
"mod_color_set_table_init_state"
[drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
To fix the issue, this commits removes
CONFIG_DRM_AMD_DC_DCN guard in color/makefile.
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
CC: Lewis Huang <Lewis.Huang@amd.com>
CC: Aric Cyr <Aric.Cyr@amd.com>
CC: Alexander Deucher <Alexander.Deucher@amd.com>
CC: Harry Wentland <hwentlan@amd.com>
CC: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
CC: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SOC15_WAIT_ON_RREG's return value needn't always been handled by
caller. new design is to fix this kind of unused variable.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On Navi12 platform, node power_dpm_force_performance_level
doesn't work correctly in one-VF mode with at least three
smu messages not supported:
SMU_MSG_SetSoftMaxByFreq
SMU_MSG_SetSoftMinByFreq
SMU_MSG_TransferTableDram2Smu
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
support for setting up XGMI FB address regions
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the module parameter sched_hw_submission is probably from user mode,
and the kernel need to check whether it is legal.
1. align hw sched jobs to power of 2 and set minimum number is 2.
2. use kernel api is_power_of_2() to simplify driver code.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We need to update each p-state in the bounding box
[How]
Update states when assigning values to clocks
v2: squash in patch to set min values (Alex)
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variable ret is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove unused amdgpu_xgmi_hive_try_lock() and smu7_reset_asic_tasks().
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's only applicable on newer asics. We could end up here when
using DC on older asics like SI or KV.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1170
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If there are no supported callbacks. We'll fall back to the
nominal clocks.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1170
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Include header file vcn_v2_0.h
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Include header file vcn_v1_0.h
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The call to pm_runtime_get_sync increments the counter even in case of
failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The call to pm_runtime_get_sync increments the counter even in case of
failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used sparse(make C=1) to find these loose ends.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used sparse(make C=1) to find these loose ends.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used sparse(make C=1) to find these loose ends.
v2:
removed unwanted extra line
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used sparse(make C=1) to find these loose ends.
v2:
removed unwanted extra line
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Include header file jpeg_v2_0.h.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Include header file jpeg_v1_0.h.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The call to pm_runtime_get_sync increments the counter even in case of
failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The call to pm_runtime_get_sync increments the counter even in case of
failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix memory leak in amdgpu_debugfs_gpr_read not freeing data when
amdgpu_virt_enable_access_debugfs failed.
Fixes: 95a2f91738 ("drm/amdgpu: restrict debugfs register access under SR-IOV")
Signed-off-by: Chen Tao <chentao107@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix memory leak in amdgpu_debugfs_gpr_read not freeing data when
pm_runtime_get_sync failed.
Fixes: a9ffe2a983 ("drm/amdgpu/debugfs: properly handle runtime pm")
Signed-off-by: Chen Tao <chentao107@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: c422a628925d ("drm/amdgpu: rename macro for VCN2.0 2.5 and 3.0")
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes below warning:
drivers/gpu/drm/amd/amdgpu/df_v3_6.c: In function ‘df_v3_6_reset_perfmon_cntr’:
drivers/gpu/drm/amd/amdgpu/df_v3_6.c:571:2: warning: ‘hi_base_addr’ may be used
uninitialized in this function [-Wmaybe-uninitialized]
571 | df_v3_6_perfmon_wreg(adev, lo_base_addr, 0, hi_base_addr, 0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: add the new macro "smu_ppt_xxx()" to unify smu callback interfaces
v2: rename the macro smu_ppt_xxx to smu_ppt_funcs.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the pptable_func callback sets should be has unify interface,
so use "smu" as the pptable_func interface first parameter.
fix interfaces:
1. i2c_eeprom_init
2. i2c_eeprom_fini
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to update the bounding box to have more granular control of the
DCFCLK.
[How]
Setup DCFCLK to use STA values and also optimal values based on
UCLK.
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
According to Marek a pipeline sync should be inserted for implicit syncs well.
v2: bump the driver version
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Despite having different IP offsets the computed address of the register(s)
are the same between gfx7..gfx10. This patch fixes the offset relative
to the GC block on gfx10.
(v2): SQ_DEBUG_STS_GLOBAL2 is 0x10 higher ...
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The call to pm_runtime_get_sync increments the counter even in case of
failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in amdgpu_display_crtc_set_config, the call to pm_runtime_get_sync
increments the counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in amdgpu_drm_ioctl the call to pm_runtime_get_sync increments the
counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in amdgpu_driver_open_kms the call to pm_runtime_get_sync increments the
counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The memcpy() function copies n bytes from memory area src to memory area
dest. So specify the firmware size in bytes.
[How]
Correct the calculation.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Lei Guo <raykwok1150@163.com>
Reviewed-by: Junwei Zhang <zjunweihit@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add rename the gpu busy percentage for consistency and
add the mem busy percentage documentation.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vega10 and previous asics use one interface, vega20 and newer
use another.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use WARN to print messages with backtrace when evictions are triggered.
This can help determine the root cause of evictions and help spot driver
bugs triggering evictions unintentionally, or help with performance tuning
by avoiding conditions that cause evictions in a specific workload.
The messages are controlled by a new module parameter that can be changed
at runtime:
echo Y > /sys/module/amdgpu/parameters/debug_evictions
echo N > /sys/module/amdgpu/parameters/debug_evictions
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Forgot to subtract the SOC15 IP offsetand add the BASE_IDX values.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Get the values from VBIOS table
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In function fill_iram_v_2, the ram_table->bright_neg_gain`s
first element [0][0] seems to be missing. This change is just
to make the code a bit readable.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA ULV can benefit low-power modes, but can sometimes cause
latency increases in small SDMA transfers. Server SKUs have a
different trade-off space in this domain, so this configures
the server SKUs' ULV hysteresis times differently than consumer
SKUs'.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The existing code used the major version number of the DRM driver
instead of the device major number of the DRM subsystem for
validating access for a devices cgroup.
This meant that accesses allowed by the devices cgroup weren't
permitted and certain accesses denied by the devices cgroup were
permitted (if they matched the wrong major device number).
Signed-off-by: Lorenz Brun <lorenz@brun.one>
Fixes: 6b855f7b83 ("drm/amdkfd: Check against device cgroup")
Reviewed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Header Changes]
- Add new initialization bits for driver to check
firmware status
- Add command for HW locking via DMUB
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dmub FW running abnormal after resume from S0i3 due
to data aliagnment issue.
[How]
Before having a solution for this issue, temparory
not doing data pack.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Sung Lee <Sung.Lee@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
during S0i3, set power state is toggled a few times,
and dmub uC will restart with current reset/hw_init.
[How]
Remove reset in set power state, and before doing hw_init,
check if dmub is enabled, and doing FW autoload check only
if dmub is already enabled.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For some special timing with border, like DMT 640*480 72Hz,
pipe split can't handle well. Thus, it will be black screen
for these special timing.
[How]
Disable pipe split for these timing with borders as W/A.
Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Multi-adapter calculate regamma table at the same time.
Two thread used the same global variable cause race
condition.
[How]
Change global buffer to local buffer
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DC is very fast at link training and stream enablement
which causes issues such as blackscreens for non-compliant
monitors.
[How]
After debugging with scaler vendors we implement the
minimum delays at the necessary locations to ensure
the monitor does not hang. Delays are generic due to
lack of IEEE OUI information on the failing displays.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
DMUB command table should be allowed to be used
only if dmcu is explicitly disabled.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To allow code reuse with minimal duplication watermark
calculation needs to be function pointer.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During the debugging process related to a hot-plug
problem with 4k display, we realized that we had
some issues related to the global state validation.
This problem was not explicitly highlighted in the
dmesg log, for this reason, this commit adds a function
that converts `enum dc_status` to a human-readable
string and appends the proper warning message in case
of failure.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Dummy pstate latency actually varies between different
UCLK frequencies, when calculating watermark C, if DAL
always assumes worst case, then it can lead to dummy
pstate not supported scenarios.
[how]
Rather than statically calculating dummy pstate using
worst case, we store the entire table of UCLK to dummy
pstate relationships. On a per mode basis, we calculate
the actual UCLK lower limit, and use the dynamic worst
case dummy pstate latency. This prevents the situation
where we don't support full p-state (which will force
high DPM), but still use low DPM dummy pstate latency.
Signed-off-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The change causes some regression in a common use case.
Will need more investigation before fixing the original issue.
[how]
This reverts commit fb8cf277b1.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We were updating mpcc if there were tree changes which
is unnecessary since any mpcc being added or removed
will automatically update the tree.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add emul specific hw function to dmub, in case of
emulator is created, we can runtime switch between
dmub emulator or dmub uC via is_virtual flag in dmub.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The SDP deadline indicate the vertical time to send CRC
infopacket in PSR.
Signed-off-by: po-tchen <po-ting.chen@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some sprcified monitor scalar cannot recognize timing
change on demand. Once the link phy disable and enable
during a short period then the Sink protection mechanism
could keep the screen in blank and cannot be recoverred.
[How]
To add 100ms delay between enable link phy and link training.
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
for audio on real TV issue.
[how]
-add wall clock programming for DPREF based when
Pixel clock is done by DP DTO.
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DML failures occur for 420 modes with dynamic pipe
splitting enabled because the ChromaViewport exceeds
the ChromaSurfaceWidth.
This is caused by adding the viewport_width instead
of the viewport_width_c.
This similarly occurs for rotated modes due to the
use of viewport_height instead of viewport_height_c.
[How]
Correct the calculations.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commmit fd0293dd5b.
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SOC_BOUNDING_BOX_VALID is unused and not required for dcn21.
[How]
Remove it.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DSC calculations fail because the u16 bits_per_pixel from
the DRM struct is being casted to the u8 drm_bpp parameters
and locals. Integer wraparound is happening because this
value is greater than 255.
[How]
Use u16 to match what's in the structure instead of u8.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Header Changes]
- Version bump to 1.0.13
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Typos cause bandwidth calculation errors, one
of which can cause infinite loop on dcn1 with eDP
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we want to use float point operation on Linux
we need to use within special kernel protection
(`kernel_fpu_{begin,end}()`.), otherwise the kernel
can clobber userspace FPU register state. For detecting
these issues we use a tool named objtool (with -Ffa
flags) to highlight the FPU problems, all warnings can
be summed up as follows:
./tools/objtool/objtool check -Ffa
drivers/gpu/drm/amd/display/dc/dml/dml_common_defs.o
[..] dc/dsc/rc_calc.o: warning: objtool: get_qp_set()+0x2f8:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: dsc_roundf()+0x5:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: dsc_ceil()+0x5:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: get_ofs_set()+0x3eb:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: calc_rc_params()+0x3c:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/dc_dsc.o: warning: objtool:
get_dsc_bandwidth_range.isra.0()+0x8d:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/dc_dsc.o: warning: objtool: setup_dsc_config()+0x2ef:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc_dpi.o: warning: objtool:copy_pps_fields()+0xbb:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc_dpi.o: warning: objtool:
dscc_compute_dsc_parameters()+0x7b:
FPU instruction outside of kernel_fpu_{begin,end}()
This commit fixes the above issues by rework DSC as described:
1. Isolate all FPU operations in a single file;
2. Use FPU flags only in the file that handles FPU operations;
3. Isolate all functions that require float point operation in static
functions;
4. Add a mid-layer function that does not use any float point operation,
and that could be safely invoked in other parts of the code.
5. Keep float point operation under DC_FP_{START/END} macro.
CC: Christian König <christian.koenig@amd.com>
CC: Alexander Deucher <Alexander.Deucher@amd.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Tony Cheng <tony.cheng@amd.com>
CC: Harry Wentland <hwentlan@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
for following new format, no alpha
SURFACE_PIXEL_FORMAT_GRPH_RGB111110_FLOAT/_FIX:
SURFACE_PIXEL_FORMAT_GRPH_BGR101111_FLOAT/_FIX
same as case SURFACE_PIXEL_FORMAT_GRPH_ARGB1555:
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Even though they are technically MMIO registers I put the bits with the sqind block
for organizational purposes.
Requested for UMR debugging.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix race condition issue when multiple jpeg starts are called.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As will clear vf fw during unload driver, to avoid idle fail. Need
to clear KIQ portion also.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Ack-by: Monk.liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guest VM issue the PSP clear_vf_fw command at 2 points:
1.On VF driver loading, after VF message PSP to setup rings,
the next command is “clear_vf_fw”
2.On VF driver unload before VF message to
destroy rings
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Ack-by: Monk.liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: c1cf79ca5c ("drm/amdgpu: use IP discovery table for renoir")
This nullptr issue should be specific on the Renoir series during try access the PWR_MISC_CNTL_STATUS
when PWR IP not been detected by discovery table. Moreover the PWR IP not existing in Renoir series is
expected therefore just avoid access PWR register in Renoir series.
Signed-off-by: Prike.Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initializes Powertune data for a specific Hawaii card by fixing what
looks like a typo in the code. The device ID 66B1 is not a supported
device ID for this driver, and is not mentioned elsewhere. 67B1 is a
valid device ID, and is a Hawaii Pro GPU.
I have tested on my R9 390 which has device ID 67B1, and it works
fine without problems.
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The comments say that the serial number is a 16-digit HEX string so the
buffer needs to be at least 17 characters to hold the NUL terminator.
The other issue is that "size" returned from sprintf() is the number of
characters before the NUL terminator so the memcpy() wasn't copying the
terminator. The serial number needs to be NUL terminated so that it
doesn't lead to a read overflow in amdgpu_device_get_serial_number().
Also it's just cleaner and faster to sprintf() directly to adev->serial[]
instead of using a temporary buffer.
Fixes: 81a1624111 ("drm/amdgpu: Add unique_id and serial_number for Arcturus v3")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Move the common code to amdgpu_smu.c instead of having one
copy in both smu_v11_0.c and smu_v12_0.c.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the calling chain from "amdgpu_smu.c -> ${asic}_ppt.c ->
smu_v11/12_0.c -> amdgpu_smu.c (smu_common_read_sensor())" to "
"amdgpu_smu.c -> ${asic}_ppt.c -> smu_v11/12_0.c". This can help
to maintain clear code layers. More similar changes will be coming.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since SMU_MSG_GetDpmClockFreq is known to be supported for Vega20
and before ASICs only. For those ASICs supporting swSMU, it is not
supported.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since .populate_smc_tables is just a wrapper of .set_default_dpm_table.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It has exactly the same functionality as .set_deep_sleep_dcefclk.
V2: correct the macro name for better trace
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Silence documentation warnings by correcting kernel-doc comments.
./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:3388: warning: Excess function parameter 'suspend' description in 'amdgpu_device_suspend'
./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:3485: warning: Excess function parameter 'resume' description in 'amdgpu_device_resume'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:418: warning: Excess function parameter 'tbo' description in 'amdgpu_vram_mgr_del'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:418: warning: Excess function parameter 'place' description in 'amdgpu_vram_mgr_del'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:279: warning: Excess function parameter 'tbo' description in 'amdgpu_gtt_mgr_del'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:279: warning: Excess function parameter 'place' description in 'amdgpu_gtt_mgr_del'
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:332: warning: Function parameter or member 'hdcp_workqueue' not described in 'amdgpu_display_manager'
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:332: warning: Function parameter or member 'cached_dc_state' not described in 'amdgpu_display_manager'
Signed-off-by: Colton Lewis <colton.w.lewis@protonmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Requested for UMR support.
(v2): Also add reg/bits for gfx9 headers
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if guest driver failed to enter full GPU access, amdgpu_driver_load_kms
will unload kms and free dev->dev_private, drm_dev_register would access
null pointer. Driver will enter an error state and can't be unloaded.
Signed-off-by: Liu ChengZhe <ChengZhe.Liu@amd.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since DAL settings come between .hw_init and .late_init of SMU. And
DAL needs to know the maximum sustainable clocks.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-and-Tested-by: Flora Cui <flora.cui@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before counting the OD percent into max power limit margin.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of hard coding it as SMU_POWER_SOURCE_AC.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop unused APIs, variables and argument.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the cached max/current power limit and move the input check
to the top layer.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the cached max/current power limit for other cases except
.late_init.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also cache the current and max power limits.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Minor code cleanup.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'UVD' is a HW engine name for Vega20 and before ASICs.
For newer ASICs, the similar engine is named as 'VCN'.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These APIs are used in amdgpu_smu.c only. Thus these wrappers
are unnecessary.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was for Vega20. However Vega20 support is
already dropped from current swSMU.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Helpful for error diagnostic.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use dev_err/warn/info/dbg instead. They are more MGPU friendly.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use dev_err/warn/info/dbg instead of pr_err/warn/info/debug.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The failed case is no SDMA1 IP for Renoir discovery table while in accessing SDMA1 reg base,
thus need have nullptr test for soc15_read_register invoked in MMR addres space inquire opt.
Signed-off-by: Prike.Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These lines are a part of the if statement and they are supposed to
be indented one more tab.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use kfree() instead of kvfree() to free rgb_user in
calculate_user_regamma_ramp() because the memory is allocated with
kcalloc().
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use kvfree() instead of kfree() to free coeff in build_regamma()
because the memory is allocated with kvzalloc().
Fixes: e752058b86 ("drm/amd/display: Optimize gamma calculations")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to do it again.
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current 100ms interval makes no sense. User gets outdated
data due to this.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Retrieve only those data interested instead of the whole table.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Retrieve only those data interested instead of the whole table.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Retrieve only those interested metrics data instead of the whole
metrics table. By this, the memory copy can be dropped.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There're 2 .dsc_pg_control, drop the first one.
.dsc_pg_control = NULL,
.dsc_pg_control = dcn20_dsc_pg_control,
Signed-off-by: Flora Cui <flora.cui@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
struct gpu_info_voltage_scaling_v1_0 & gpu_info_soc_bounding_box_v1_0 is
defined in amdgpu_socbb.h
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update powerplay table for sienna_cichlid, add set_thermal_range and
get_max_power_limit function for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
move smu_v11_0_get_max_power_limit and smu_v11_0_set_thermal_range
function from smu_v11_0.c to asic specific _ppt.c to avoid powerplay
table conflict with different ASIC with smu11.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As IO operations(access to SMU internals) and possible sleep are
involved in throttling logging. Workqueue can handle them well.
Otherwise we may hit "scheduling while atomic" error.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of disabling and reenabling it later.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To avoid possible memory leak.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than allocating it dynamically at runtime considering it is only
several bytes in size.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thus redundant code can be dropped.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And some minor changes as dropping unused parameter and label
internal used API as static.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Those common operations(for all ASICs) are placed first and followed
by ASIC specific ones. While the display related are placed at the last.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Then redundant code can be dropped.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since smu_smc_table_hw_init() is needed for both .hw_init and .resume.
By doing this, we can drop unnecessary operations on resume.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So that we do not need to perform those unnecessary operations again on
resume.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eliminate the buffer allocation and drop the unnecessary
overdrive table uploading.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Combine and simplify the logics for setup pptable.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Combine and simplify the logics for retrieving bootup
clocks.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To fit common design. And this can simplify the buffer deallocation.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So that code can be shared between .hw_fini and .suspend.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Minor code cleanups.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The macros check if the asic has the callback.
So no need to explicitly check.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a dml_print message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We may end up with no planes set yet, depending on the ordering, but we
should have the proper blanking state which is either handled by either
DPG or TG depending on the hardware generation. Check both to determine
the proper blanked state.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/781
Fixes: 5fc0cbfad4 ("drm/amd/display: determine if a pipe is synced by plane state")
Cc: nicholas.kazlauskas@amd.com
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Whenever we switch between tiled formats without also switching pixel
formats or doing anything else that recreates the DC plane state we
can run into underflow or hangs since we're not updating the
DML parameters before committing to the hardware.
[How]
If the update type is FULL then call validate_bandwidth again to update
the DML parmeters before committing the state.
This is basically just a workaround and protective measure against
update types being added DC where we could run into this issue in
the future.
We can only fully validate the state in advance before applying it to
the hardware if we recreate all the plane and stream states since
we can't modify what's currently in use.
The next step is to update DM to ensure that we're creating the plane
and stream states for whatever could potentially be a full update in
DC to pre-emptively recreate the state for DC global validation.
The workaround can stay until this has been fixed in DM.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than checking the ring type manually. We already set
this for MES and KIQ (and a few other special cases).
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 4541ea81ed.
This changes structs used by the hardware and breaks dpm on some cards.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To match previous behavior and to not hang the kernel if someone
accidentally builds with KGDB enabled.
Fixes: 1aad707819 ("drm/amd/display: Make BREAK_TO_DEBUGGER() a debug print")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Abstract powergate_vcn/jpeg functions, using smu_dpm_set* to implement it.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The bounding box is still needed by Navi12, temporarily read it from gpu_info
firmware. Should be droped when DAL no longer needs it.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to guard some new DCN3.0 stuff.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was done already done for other DCN blocks.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initilize function tables for hw programing
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Video Package generator.
used to prepare avi info, DP info etc
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Audio formating
Audio related code for setup/control
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-Handle DCN3 cases for bios parser and command tables
-Add command function tables for DCN3
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for managing resources for DCN3
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to program GPIO HW block
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add IWQ services for DCN3,
This allows us to create/init and manage irqs for DCN3
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for DML(Display mode library) for bandwidth calculations
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to program the DCN3 HUBP (Display to data fabric interface
pipe)
HW Blocks:
+--------++------+
| HUBBUB || HUBP |
+--------++------+
|
v
+--------+
| DPP |
+--------+
|
v
+--------+
| MPC |
+--------+
|
v
+-------+
| OPP |
+-------+
|
v
+--------+
| OPTC |
+--------+
|
v
+--------+ +--------+
| DIO | | DCCG |
+--------+ +--------+
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to program the DCN3 DPP (Multiple pipe and plane combine)
HW Blocks:
+--------+
| DPP |
+--------+
|
v
+--------+
| MPC |
+--------+
|
v
+-------+
| OPP |
+-------+
|
v
+--------+
| OPTC |
+--------+
|
v
+--------+ +--------+
| DIO | | DCCG |
+--------+ +--------+
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to program the DCN3 MPC (Multiple pipe and plane combine)
HW Blocks:
+--------+
| MPC |
+--------+
|
v
+-------+
| OPP |
+-------+
|
v
+--------+
| OPTC |
+--------+
|
v
+--------+ +--------+
| DIO | | DCCG |
+--------+ +--------+
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to program the DCN3 OPP (Output Plane Processing)
HW Blocks:
+-------+
| OPP |
+-------+
|
v
+--------+
| OPTC |
+--------+
|
v
+--------+ +--------+
| DIO | | DCCG |
+--------+ +--------+
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds support for handling of clocking relevant to the DCN3 block
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for the DIO (Display IO) block of DCN3, which entails our
stream and link encoders.
HW Blocks:
+--------+
| DIO |
+--------+
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
a.Check whether mem train support when try to reserve related memory.
b.Remove ASIC check and atom firmware table version check as the check
of firmware capability is enough to achieve that purpose.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add memory training support for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Query reserved tmr size through atom firmwareinfo for Sienna_Cichlid and onwards
for all the use cases (IP discovery/G6 memory
training/profiling/diagnostic data.etc), otherwise, fallback to legacy
approach to check and reserve tmr block for ip discovery data and G6
memory training data respectively
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Sienna_Cichlid, PMFW will handle the features disablement on BACO in. No
need to have driver stepped in.
V2: limit this for baco really
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop the hardcode of sienna_cichlid which will force to use softpptable,
so that it can use pptable on vbios once the value of pp_table_id get
from vbios is 0.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add function to check whether baco is support for sienna cichlid.
Remove fucntion of get clock by type with latency as it will not be
called.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support for psp firmware header version v1_3 initialization and
information print.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for PSP SPL (Security patch level) table to support
anti-rollback of FW loaded by Trusted OS.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The instant retrieved gfxclk value should be 0 in gfxoff state.
This can be fetched with gfxoff enabled.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Sienna_Cichlid, GFXOFF state puts gfx dpm into standby mode, then the
gfxclk can't be retireved.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to force and unforce MCLK or SOCCLK to dpm limit value.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a regression due to the rebase , add sienna_cichlid sriov detection back
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only enable one gfx pipe for sienna_cichlid currently.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fw ctf can be triggered if the temperature can't be throttled below the limit.
then the gpu will be powered off and the whole system will hang.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the coding error to skip GPU scheduler setup for KIQ and MES ring.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable VDDCI and MVDD if PP_MCLK_DPM_MASK was enable for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add function to append powerplay table from vbios for sienna_cichlid.
v2: squash in warning fix
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On SRIOV run time, driver shouldn't directly access invalidation registers through MMIO.
Use kiq to submit wait_reg_mem package for the invalidation
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable uclk deep sleep for sienna_cichlid.
Df cstate kicks in first, then df triggers uclk ds with the sideband.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN3 has 2 unsymmetrical instances, i.e there're less codecs
on instance 1, we use 0 for decode and 1 for encode for now
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable DPG mode for VCN3.0 by updating related flag.
V2: update description.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <james.zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To workaround an issue in DPG
V2: update description.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <james.zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename SOC15_DPG_MODE_OFFSET_2_0, RREG32_SOC15_DPG_MODE_2_0 and
WREG32_SOC15_DPG_MODE_2_0 for VCN2.0, VCN2.5 and VCN3.0.
These three macros are used VCN2.0, VCN2.5 and VCN3.0, therefore rename
it to be a general name.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <james.zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename RREG32_SOC15_DPG_MODE and WREG32_SOC15_DPG_MODE for VCN1.0
These two macros are used specifically for VCN1.0, therefore rename
it from general name to VCN1.0 specific name.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <james.zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add range for vcn instance 1 for translation for internal register offset, which
is needed for VCN3.0
V2: update description.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <james.zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add vcn_v3_0_stop_dpg_mode to power off in DPG mode for VCN3.0
V2: update description.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <james.zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add vcn_v3_0_start_dpg_mode to setup and start VCN block in DPG mode for VCN3.0
V2: Separate from previous patch-0002, and update description.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <james.zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add vcn_v3_0_mc_resume_dpg_mode to resume memory controller in DPG mode for VCN3.0
V2: Separate from previous patch-0002, and update description.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <james.zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add vcn_v3_0_clock_gating_dpg_mode to enabling clock gating in DPG mode for VCN3.0
V2: Separate from previous patch-0002, and update description.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <james.zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable OUT OF BAND MONITER for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bundle GPO with gfx DPM and enable it since gfxclk dpm
should work first then GPO works.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GPO is graphics power optimizer.
SMU calculates the 16 gfxclk V/F points according to the CU numbers
and memory activity.RLC picks one of them according to the memory
speed requirements for the data transmission.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mmhub pg can be obvserved from PCTL_CTRL
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable athub pg and the status can be checked in
ATHUB_MISC_CNTL.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Statically allocated VM inv eng of gfxhub on sienna_cichlid is used up.
Also VM inv eng is no need for mes ring.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass a piece of memory to MES ucode to fill contents.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update for new member query_status_fence_gpu_mc_ptr in MESAPI_SET_HW_RESOURCES.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update mes_api_def.h to match the latest mes fw.
v2: clean up coding style based on kernel standards:
- fix indentation and alignment
- break long lines
- put the opening brace last on the line
- remove unnecessary blank line and space
- replace uint(32|64) with standard uint(32|64)_t
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add function to get pptable power limit for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU firmware already been loaded from host, don't enable it for now.
May need to re-work it if we want to enable the SMU for guest in the future.
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable VCN dpm set for sienna_cichlid.
Enable JPEG dpm set for sienna_cichlid.
v2: squash in BACO fix (Kenneth)
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix typo for vcn3/jpeg3 idle check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the feature of FCLK Deep Sleep for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the feature of Voltage Regulator (VR) Hot for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdkfd add support for sienna_cichlid virtual function
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Preserve scalar GPRs ttmp[4:11] and ttmp13
- Add single step exception during context save workaround
- Remove incorrect PC adjustment during context save
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The contents of macros are parsed by the assembler before conditions
have been tested. This causes assembly errors when using IP-specific
instructions in the IP-unified trap handler.
Add a preprocessing step to filter IP-specific code.
Also guard a Navi1x-specific instruction (no effect on Sienna_Cichlid).
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Replace SQC stores with TCP stores
- Synchronize with MSG_SAVEWAVE via lgkmcnt
- HW_REG_IB_STS is now read-only
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v4: drop get_tile_config, comment out other callbacks
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only disable 3D pipe 1 on navi1x, enable 3D pipe 1 on Sienna_Cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Each of HDP flush engine should be used by one ring, correct allocate of
hdp flush engine to SDMA ring.
Correct me value of each SDMA ring, as it was cleared when init microcode.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
athub ls is bounded with hdp ls,verified.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add HDP mgcg and ls support and verified
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
confirmed that IPH_MEM_POWER_CTRL_EN and RC_MEM_POWER_CTRL_EN
have to be set for SRAM LS/DS/SD
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update gfx golden setting for gfx10.3.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So the LMI register will be programmed properly
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for the second instance with correct index
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The signed header is added
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Open GFX MGCG, CGCG and 3DCG for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Sienna_Cichlid, query fw_reserved_fb_size from vbios directly.
For navi1x, fall back to default 64K TMR size.
For pre-navi, no need to reserve tmr region in top LFB.
v2: fix TMR define (Alex)
v3: partially revert size change
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fw_reserved_size_in_kb is introduced for driver to query
the TMR region reserved by PSP BL in Sienna_Cichlid and onwards
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
firmware_info v3_4 strucure will be used by kernel driver
to query various parameters set by VBIOS for Sienna_Cichlid
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As all four sdma firmware are same, PSP only receive one SDMA fw.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
tiling mode table is not used anymore for gfx10
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vram_info v2_5 was introduced to support sienna_cichlid
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pa_sc_tile_steering_override is only programmable for
gfx10.0/10.1/10.2
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By adding JPEG HW block to Sienna_Cichlid
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By setting up the flags to the ASIC
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is for static powergating and clockgating
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With basic IP block functions and ring functions
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By adding VCN HW block to Sienna_Cichlid
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By adding Sienna_Cichlid VCN firmware
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By setting up the flags to the ASIC
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is for static powergating and clockgating
v2: fix registers (Alex)
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With basic IP block functions and ring functions
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct CP_MES_IC_OP_CNTL register address for sienna_cichlid on mes v10.1.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The number of queue per pipe for mec on sienna_cichlid should be 4.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add mes block support to sienna_cichlid.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update mes initialization sequence.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As mes ring directly submits to hardwared,
it's no need to set up GPU scheduler for mes ring.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert to psp defined ucode item, so that psp can recognize them.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copy mes firmware to gpu buffer.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copy mes firmware info into into global fw array, preparing
for fw front door loading.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The routine is implemented to generate mes command to
assign the hardware resources which can be scheduled
to mes.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The routine is implemented to generate mes command
to query the status of hardware scheduler.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The routine is implemented to generate mes command to remove
a specified hardware queue.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The routine is implemented to generate mes command
to install a hardware queue.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The helper function is used to submit mes command and poll waiting
for the command completion.
v2: replaced with amdgpu_fence_wait_polling to wait.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the definitions of mes commands.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the mes ring during mes block initialization.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Install mes queue via kiq. Disable it temporarily
until it's workable.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Directly writing mes queue registers to set up it.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize the mqd according to mes ring setup.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allocate mqd buffer preparing for mes queue setup.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement mes ring functions and set up them.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do the software initialization on the mes ring.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
eop buffer will be used for mes queue setup.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update some mes definitions.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check if irq_src is NULL to avoid dereferencing a NULL pointer,
for MES ring is uneccessary to recieve an interrupt notification.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a new ring type definition.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MES ring will use the assigned doorbell index for
command submission.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sienna_Cichlid have 2 VCN instances, using different register for range
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable PSP block for firmware loading and other security
setup only when amdgpu use PSP load type to load ucode.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add gmc clockgating support for sienna_cichlid.
The athub version used for sienna_cichlid is v2.1.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add athub v2.1 function and support to compile it.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Removed loading duplicate instances of SDMA FW for Sienna_Cichlid,
As sienna_cichlid only use a single image for all instances.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- It fixes wrong return value by returing proper error value instead of
fixed one.
- It fixes ref count leak in mic_pre_enable.
One cleanup
- It removes dev_err() call on platform_get_irq() failure because
platform_get_irq() call dev_err() itself on failure.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=PEF5
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-fixes-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Two fixups
- It fixes wrong return value by returing proper error value instead of
fixed one.
- It fixes ref count leak in mic_pre_enable.
One cleanup
- It removes dev_err() call on platform_get_irq() failure because
platform_get_irq() call dev_err() itself on failure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1593395988-4612-1-git-send-email-inki.dae@samsung.com
A few fixes, mostly fallout from the address space refactor and dpu
color processing.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGv0SSXArdYs=mOLqJPJdkvk8CpxaJGecqgbOGazQ2n5og@mail.gmail.com
[Why]
Changes that are fast don't require updating DLG parameters making
this call unnecessary. Considering this is an expensive call it should
not be done on every flip.
DML touches clocks, p-state support, DLG params and a few other DC
internal flags and these aren't expected during fast. A hang has been
reported with this change when called on every flip which suggests that
modifying these fields is not recommended behavior on fast updates.
[How]
Guard the validation to only happen if update type isn't FAST.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1191
Fixes: a24eaa5c51 ("drm/amd/display: Revalidate bandwidth before commiting DC updates")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This registers will be used to implement PSR2 manual tracking/selective
fetch.
v2:
- Fixed typo in _PLANE_SEL_FETCH_BASE
- Renamed PSR2_MAN_TRK_CTL bits to better match spec names
- Renamed _PLANE_SEL_FETCH_* to better match spec names
BSpec: 55229
BSpec: 50424
BSpec: 50420
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200626010151.221388-3-jose.souza@intel.com
Future patches will bring PSR2 selective fetch configuration
validation but most of the configuration checks will be used for HW
tracking and selective fetch so the reoder was necessary.
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200626010151.221388-2-jose.souza@intel.com
Rearrange the allocation of the mm_struct registration to avoid
allocating underneath the i915->mm_lock, so that we avoid tainting the
lock (and in turn many other locks that may be held as i915->mm_lock is
taken, and those locks we may want on the free [shrinker] paths). In
doing so, we convert the lookup to be RCU protected by courtesy of
converting the free-worker to be an rcu_work.
v2: Remember to use hash_rcu variants to protect the list iteration from
concurrent add/del.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200619194038.5088-1-chris@chris-wilson.co.uk
Often we seem to detect an underrun right after modeset on gen2.
It seems to be a spurious detection (potentially the pipe is still
in a wonky state when we enable the planes). An extra vblank wait
seems to cure it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-13-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The default fbc1 compression interval we use is 500 frames. That
translates to over 8 seconds typically. That's rather excessive
so let's drop it to 1 second.
The hardware will not attempt recompression unless at least one
line has been modified, so a shorter compression interval should
not cause extra bandwidth use in the purely idle scenario. Of
course in the mostly idle case we are possibly going to recompress
a bit more.
Should really try to find some kind of sweet spot to minimize
the energy usage...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-11-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The hardware host tracking won't nuke the entire cfb (unless the
entire fb is written through the gtt) so don't clear the busy_bits
for gtt tracking.
Not that it really matters anymore since we've lost ORIGIN_GTT usage
everywhere.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-7-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The current fence_y_offset calculation is broken. I think it more or
less used to do the right thing, but then I changed the plane code
to put the final x/y source offsets back into the src rectangle so
now it's just subtraacting the same value from itself. The code would
never have worked if we allowed the framebuffer to have a non-zero
offset.
Let's do this in a better way by just calculating the fence_y_offset
from the final plane surface offset. Note that we don't align the
plane surface address to fence rows so with horizontal panning there's
often a horizontal offset from the fence start to the surface address
as well. We have no way to tell the hardware about that so we just
ignore it. Based on some quick tests the invlidation still happens
correctly. I presume due to the invalidation nuking at least the full
line (or a segment of multiple lines).
Fixes: 54d4d719fa ("drm/i915: Overcome display engine stride limits via GTT remapping")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-4-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Only the MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
MEDIA_BUS_FMT_RGB888_1X7X4_SPWG and MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA bus
formats are valid for LVDS panels. Warn at probe time to catch the
common mistake of using an incorrect format, as well as discrepancies
between the bus format and the reported bpc.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629233320.8774-5-laurent.pinchart+renesas@ideasonboard.com
The DRM bus flags reporting on which clock edge the pixel data and sync
signals are sampled or driven don't make sense for LVDS panels, as the
bus then uses sub-clock timings to send data. Drop those flags and add a
warning in the probe function to make sure the mistake won't be
repeated.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629233320.8774-4-laurent.pinchart+renesas@ideasonboard.com
The Satoz SAT050AT40H12R2 panel is an LVDS panel, the
MEDIA_BUS_FMT_RGB888_1X24 bus format is thus incorrect. Set it to the
correct value MEDIA_BUS_FMT_RGB888_1X7X4_SPWG.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629233320.8774-3-laurent.pinchart+renesas@ideasonboard.com
Added epoch counter checking to intel_encoder_hotplug
in order to be able process all the connector changes,
besides connection status. Also now any change in connector
would result in epoch counter change, so no multiple checks
are needed.
v2: Renamed change counter to epoch counter. Fixed type name.
v3: Fixed rebase conflict
v4: Remove duplicate drm_edid_equal checks from hdmi and dp,
lets use only once edid property is getting updated and
increment epoch counter from there.
Also lets now call drm_connector_update_edid_property
right after we get edid always to make sure there is a
unified way to handle edid change, without having to
change tons of source code as currently
drm_connector_update_edid_property is called only in
certain cases like reprobing and not right after edid is
actually updated.
v5: Fixed const modifiers, removed blank line
v6: Removed drm specific part from this patch, leaving only
i915 specific changes here.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630002700.5451-4-kunal1.joshi@intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
This counter will be used by drm_helper_probe_detect caller to determine
if anything had changed(including edid, connection status and etc).
Hardware specific driver detect hooks are responsible for updating this
counter when some change is detected to notify the drm part,
which can trigger for example hotplug event.
Also now call drm_connector_update_edid_property
right after we get edid always to make sure there is a
unified way to handle edid change, without having to
change tons of source code as currently
drm_connector_update_edid_property is called only in
certain cases like reprobing and not right after edid is
actually updated.
v2: Added documentation for the new counter. Rename change_counter to
epoch_counter.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105540
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630002700.5451-3-kunal1.joshi@intel.com
Many drivers would benefit from using
drm helper to compare edid, rather
than bothering with own implementation.
v2: Added documentation for this function.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630002700.5451-2-kunal1.joshi@intel.com
Currently there is no null check for a failed memory allocation
on the dsb object and without this a null pointer dereference
error can occur. Fix this by adding a null check.
Note: added a drm_err message in keeping with the error message style
in the function.
Addresses-Coverity: ("Dereference null return")
Fixes: afeda4f3b1 ("drm/i915/dsb: Pre allocate and late cleanup of cmd buffer")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200616114221.73971-1-colin.king@canonical.com
Remove the use of dev->archdata.iommu and use the private per-device
pointer provided by IOMMU core code instead.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200625130836.1916-3-joro@8bytes.org
A single Ri mismatch doesn't automatically mean that the link integrity
is broken. Update and check of Ri and Ri' are done asynchronously. In
case an update happens just between the read of Ri' and the check against
Ri there will be a mismatch even if the link integrity is fine otherwise.
Signed-off-by: Oliver Barta <oliver.barta@aptiv.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504123524.7731-1-oliver.barta@aptiv.com
Cross-subsystem Changes:
- Improve dma-buf docs.
Core Changes:
- Add NV15, Q410, Q401 yuv formats.
- Add uncompressed AFBC modifier.
- Add DP helepr for reading Ignore MSA from DPCD.
- Add missing panel type for some panels
- Optimize drm/mm hole handling.
- Constify connector to infoframe functions.
- Add debugfs for VRR monitor range.
Driver Changes:
- Assorted small bugfixes in panfrost, malidp, panel/otm8009a.
- Convert tfp410 dt bindings to yaml, and rework time calculations.
- Add support for a few more simple panels.
- Cleanups and optimizations for ast.
- Allow adv7511 and simple-bridge to be used without connector creation.
- Cleanups to dw-hdmi function prototypes.
- Remove enabled bool from tiny/repaper and mipi-dbi, atomic handles it.
- Remove unused header file from dw-mipi-dsi
- Begin removing ttm_bo->offset.
-----BEGIN PGP SIGNATURE-----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=72wu
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-06-26' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.9:
Cross-subsystem Changes:
- Improve dma-buf docs.
Core Changes:
- Add NV15, Q410, Q401 yuv formats.
- Add uncompressed AFBC modifier.
- Add DP helepr for reading Ignore MSA from DPCD.
- Add missing panel type for some panels
- Optimize drm/mm hole handling.
- Constify connector to infoframe functions.
- Add debugfs for VRR monitor range.
Driver Changes:
- Assorted small bugfixes in panfrost, malidp, panel/otm8009a.
- Convert tfp410 dt bindings to yaml, and rework time calculations.
- Add support for a few more simple panels.
- Cleanups and optimizations for ast.
- Allow adv7511 and simple-bridge to be used without connector creation.
- Cleanups to dw-hdmi function prototypes.
- Remove enabled bool from tiny/repaper and mipi-dbi, atomic handles it.
- Remove unused header file from dw-mipi-dsi
- Begin removing ttm_bo->offset.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b1e53620-7937-895c-bfcf-ed208be59c7c@linux.intel.com
The PL111 DRM driver is now the sole user of the external
CLCD registers header file, so let's absorb that into the
pl111_drm.h file and save the external include.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609200446.153209-3-linus.walleij@linaro.org
This moves over some of the credit for the development of this
driver from the old fbdev driver that I used as reference when
getting this in place.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609200446.153209-1-linus.walleij@linaro.org
The linetime watermark is a 9 bit value, which gives us
a maximum linetime of just below 64 usec. If the linetime
exceeds that value we currently just discard the high bits
and program the rest into the register, which angers the
state checker.
To avoid that let's just clamp the value to the max. I believe
it should be perfectly fine to program a smaller linetime wm
than strictly required, just means the hardware may fetch data
sooner than strictly needed. We are further reassured by the
fact that with DRRS the spec tells us to program the smaller
of the two linetimes corresponding to the two refresh rates.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200625200003.12436-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
We only need the page array when the BO is about to be accessed.
So not only populate, but also create it on demand.
v2: move NULL check into ttm_tt_create()
v3: fix the occurrence in ttm_bo_kmap_ttm as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/373182/
Instead of signaling failure by setting the node pointer to
NULL do so by returning -ENOSPC.
v2: add memset() to make sure that mem is always initialized.
v3: drop memset() only set mm_node = NULL, move mm_node init in amdgpu
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/373181/
Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Alexandre Oliva has recently removed these files from Linux Libre
with concerns that the sources weren't available.
The sources are available on IGT repository, and only open source
tools are used to generate the {ivb,hsw}_clear_kernel.c files.
However, the remaining concern from Alexandre Oliva was around
GPL license and the source not been present when distributing
the code.
So, it looks like 2 alternatives are possible, the use of
linux-firmware.git repository to store the blob or making sure
that the source is also present in our tree. Since the goal
is to limit the i915 firmware to only the micro-controller blobs
let's make sure that we do include the asm sources here in our tree.
Btw, I tried to have some diligence here and make sure that the
asms that these commits are adding are truly the source for
the mentioned files:
igt$ ./scripts/generate_clear_kernel.sh -g ivb \
-m ~/mesa/build/src/intel/tools/i965_asm
Output file not specified - using default file "ivb-cb_assembled"
Generating gen7 CB Kernel assembled file "ivb_clear_kernel.c"
for i915 driver...
igt$ diff ~/i915/drm-tip/drivers/gpu/drm/i915/gt/ivb_clear_kernel.c \
ivb_clear_kernel.c
< * Generated by: IGT Gpu Tools on Fri 21 Feb 2020 05:29:32 AM UTC
> * Generated by: IGT Gpu Tools on Mon 08 Jun 2020 10:00:54 AM PDT
61c61
< };
> };
\ No newline at end of file
igt$ ./scripts/generate_clear_kernel.sh -g hsw \
-m ~/mesa/build/src/intel/tools/i965_asm
Output file not specified - using default file "hsw-cb_assembled"
Generating gen7.5 CB Kernel assembled file "hsw_clear_kernel.c"
for i915 driver...
igt$ diff ~/i915/drm-tip/drivers/gpu/drm/i915/gt/hsw_clear_kernel.c \
hsw_clear_kernel.c
5c5
< * Generated by: IGT Gpu Tools on Fri 21 Feb 2020 05:30:13 AM UTC
> * Generated by: IGT Gpu Tools on Mon 08 Jun 2020 10:01:42 AM PDT
61c61
< };
> };
\ No newline at end of file
Used IGT and Mesa master repositories from Fri Jun 5 2020)
IGT: 53e8c878a6fb ("tests/kms_chamelium: Force reprobe after replugging
the connector")
Mesa: 5d13c7477eb1 ("radv: set keep_statistic_info with
RADV_DEBUG=shaderstats")
Mesa built with: meson build -D platforms=drm,x11 -D dri-drivers=i965 \
-D gallium-drivers=iris -D prefix=/usr \
-D libdir=/usr/lib64/ -Dtools=intel \
-Dkulkan-drivers=intel && ninja -C build
v2: Header clean-up and include build instructions in a readme (Chris)
Modified commit message to respect check-patch
Reference: http://www.fsfla.org/pipermail/linux-libre/2020-June/003374.html
Reference: http://www.fsfla.org/pipermail/linux-libre/2020-June/003375.html
Fixes: 47f8253d2b ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Cc: <stable@vger.kernel.org> # v5.7+
Cc: Alexandre Oliva <lxoliva@fsfla.org>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200610201807.191440-1-rodrigo.vivi@intel.com
(cherry picked from commit 5a7eeb8ba1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The helper uses the MIPI_DCS_SET_TEAR_SCANLINE, although it's currently
using the generic write. This does not look right.
Perhaps some platforms don't distinguish between the two writers?
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: Vinay Simha BN <simhavcs@gmail.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Fixes: e839508163 ("drm/dsi: Implement set tear scanline")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200505160329.2976059-3-emil.l.velikov@gmail.com
A few of the new panels create a local macro wrapping around
mipi_dsi_dcs_write. At the same time, they don't really care about the
command/payload split.
mipi_dsi_dcs_write does a kmalloc/memcpy/kfree for payload > 7 bytes.
Avoid that all together by using the _buffer function.
Aside:
panel-xinpeng-xpp055c272.c calls its wrapper "generic" although it
should be "dcs". But that for another day/patch.
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200505160329.2976059-2-emil.l.velikov@gmail.com
Currently the function heap allocates when we have any payload. Where in
many case the payload is 1 byte - ouch.
>From casual observation, vast majority of the payloads are smaller than
8 bytes - so use a stack array tx[8] to avoid the senseless kmalloc and
kfree dance.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200505160329.2976059-1-emil.l.velikov@gmail.com
in mic_pre_enable, pm_runtime_get_sync is called which
increments the counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Propagate the proper error codes from the called functions instead of
unconditionally returning 0.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Merge conflict so merged it manually.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
platform_get_irq() will call dev_err() itself on failure,
so there is no need for the driver to also do this.
This is detected by coccinelle.
Signed-off-by: Tamseel Shams <m.shams@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch adds missing BUS fields to the display panel descriptions of
the panels which are found on NVIDIA Tegra devices:
1. AUO B101AW03
2. Chunghwa CLAA070WP03XG
3. Chunghwa CLAA101WA01A
4. Chunghwa CLAA101WB01
5. Innolux N156BGE L21
6. Samsung LTN101NT05
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200621222742.25695-3-digetx@gmail.com
The EDT ET057090DHU panel has a DPI connector and not LVDS. This patch
corrects the panel's description.
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: 94f07917eb ("drm/panel-simple: Add missing connector type for some panels")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200621222742.25695-2-digetx@gmail.com
Disable the plane if it's not visible. Otherwise mtk_ovl_layer_config()
would proceed with invalid plane and we may see vblank timeout.
Fixes: 119f517362 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Equivalent information can be nowadays obtained using function tracer.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
GPU address handling is device specific and should be handle by its device
driver.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/372937/
Signed-off-by: Christian König <christian.koenig@amd.com>
This patch uses score to select a new drm scheduler for better
loadbalance between multiple drm schedulers instead of num_jobs.
Below are test results after running amdgpu_test for ~10 times.
Before this patch:
sched_name num of many times it got schedule
========= ==================================
sdma0 1463
sdma1 198
comp_1.0.1 280
After this patch:
sched_name num of many times it got schedule
========= ==================================
sdma0 925
sdma1 928
comp_1.0.1 177
comp_1.1.1 44
comp_1.2.1 43
comp_1.3.1 44
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/373000/
Signed-off-by: Christian König <christian.koenig@amd.com>
Store ttm bo->offset in struct nouveau_bo instead.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/372932/
Signed-off-by: Christian König <christian.koenig@amd.com>
Calculate GPU offset within vmwgfx driver itself without depending on
bo->offset.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/372933/
Signed-off-by: Christian König <christian.koenig@amd.com>
ti-sn65dsi86 bridge is enumerated as a runtime device. When
suspend is triggered, PM core adds a refcount on all the
devices and calls device suspend, since usage count is
already incremented, runtime suspend will not be called
and it kept the bridge regulators and gpios ON which resulted
in platform not entering into XO shutdown.
Add changes to force suspend on the runtime device during pm sleep.
Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609120455.20458-1-harigovi@codeaurora.org
* In mcde, set up fbdev after device registration and removde the last access
to dev->dev_private. Fixes an error message and a segmentation fault.
* Set the connector type for LogicPT Type 28 and newhaven_nhd_43_480272ef_atxl
panels.
* In uvesafb, fix the handling of the noblank option.
* Fix panel orientation for Asus T101HA and Acer S1003.
* Fix DMA configuration for sun4i if IOMMU is present.
* Fix regression in VT restoration. Unbreaks userspace (i.e., Xorg) VT handling.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAl70X3MACgkQaA3BHVML
eiPP+ggAnquBWHn4QYVrw4tlcI8supVJurQflcYYYBzPksiijheJAE+74nfCWwTB
aijbyiPSp6tq8aP2NQpasW3pQdo0gQ2I9CwYzCxPTDk3X0iSxGEIToDieBTonmKn
UrvUZCQ5L775XJASus2gH4/b34Y0zIrQfCLj1ECOOSNjUWvTLntWrbJDl8S9SISh
teIAFZ1qAlcrTTNuAZ1lp+e+AlXEXKhi8+CqY0ltiV1q4JtO1SdOMnb5y0rxsYOy
H/KVWbZWdWkgIrZpJ1v/+jio0Mkh0jDi1ldJ6UDxWAv5viQnExICUY1d88Qw2xVo
73w4iJ/ujNIK3kDZQmvLMlVTjc1oSw==
=GRqS
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2020-06-25' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull (less than what git shortlog provides):
* In mcde, set up fbdev after device registration and removde the last access
to dev->dev_private. Fixes an error message and a segmentation fault.
* Set the connector type for LogicPT Type 28 and newhaven_nhd_43_480272ef_atxl
panels.
* In uvesafb, fix the handling of the noblank option.
* Fix panel orientation for Asus T101HA and Acer S1003.
* Fix DMA configuration for sun4i if IOMMU is present.
* Fix regression in VT restoration. Unbreaks userspace (i.e., Xorg) VT handling.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200625082717.GA14856@linux-uq9g
[Why]
It's useful to know the min and max vrr range for IGT testing.
[How]
Expose the min and max vfreq for the connector via a debugfs file
on the connector, "vrr_range".
Example usage: cat /sys/kernel/debug/dri/0/DP-1/vrr_range
v2:
* Fix the typo in max_vfreq (Manasi)
* Change the name of node to i915_vrr_info so we can add
other vrr info for more debug info (Manasi)
* Change the VRR capable to display Yes or No (Manasi)
* Fix indentation checkpatch errors (Manasi)
v3:
* Remove the unnecessary debug print (Manasi)
v4:
* Rebase
v5:
* Rename to vrr_range to match AMD debugfs
v6:
* Rebase (manasi)
v7:
* Fix cmpilation due to rebase
v8:
* Move debugfs node creation logic to DRM (Emil)
* Remove AMD specific logic (Emil)
v9:
* Separate patch for removal of AMD specific logic (Manasi)
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200622142519.16214-3-bhanuprakash.modem@intel.com
The DP spec says:
"The transmitter shall support at least three levels of voltage
swing (Levels 0, 1, and 2).
If only three levels of voltage swing are supported (VOLTAGE
SWING SET field (bits 1:0) are programmed to 10 (Level 2)),
this bit shall be set to 1, and cleared in all other cases.
If all four levels of voltage swing are supported (VOLTAGE
SWING SET field (bits 1:0) are programmed to 11 (Level 3)),
this bit shall be set to 1,and cleared in all other cases."
Let's follow that exactly instead of the current apporach
where we can set those also for vswing/preemph levels 0 or 1
(or 2 when the platform max is 3).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200512174145.3186-7-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
I updated my system with Radeon VII from kernel 5.6 to kernel 5.7, and
following started to happen on each boot:
...
BUG: kernel NULL pointer dereference, address: 0000000000000128
...
CPU: 9 PID: 1940 Comm: modprobe Tainted: G E 5.7.2-200.im0.fc32.x86_64 #1
Hardware name: System manufacturer System Product Name/PRIME X570-P, BIOS 1407 04/02/2020
RIP: 0010:lock_bus+0x42/0x60 [amdgpu]
...
Call Trace:
i2c_smbus_xfer+0x3d/0xf0
i2c_default_probe+0xf3/0x130
i2c_detect.isra.0+0xfe/0x2b0
? kfree+0xa3/0x200
? kobject_uevent_env+0x11f/0x6a0
? i2c_detect.isra.0+0x2b0/0x2b0
__process_new_driver+0x1b/0x20
bus_for_each_dev+0x64/0x90
? 0xffffffffc0f34000
i2c_register_driver+0x73/0xc0
do_one_initcall+0x46/0x200
? _cond_resched+0x16/0x40
? kmem_cache_alloc_trace+0x167/0x220
? do_init_module+0x23/0x260
do_init_module+0x5c/0x260
__do_sys_init_module+0x14f/0x170
do_syscall_64+0x5b/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
...
Error appears when some i2c device driver tries to probe for devices
using adapter registered by `smu_v11_0_i2c_eeprom_control_init()`.
Code supporting this adapter requires `adev->psp.ras.ras` to be not
NULL, which is true only when `amdgpu_ras_init()` detects HW support by
calling `amdgpu_ras_check_supported()`.
Before 9015d60c9e, adapter was registered by
-> amdgpu_device_ip_init()
-> amdgpu_ras_recovery_init()
-> amdgpu_ras_eeprom_init()
-> smu_v11_0_i2c_eeprom_control_init()
after verifying that `adev->psp.ras.ras` is not NULL in
`amdgpu_ras_recovery_init()`. Currently it is registered
unconditionally by
-> amdgpu_device_ip_init()
-> pp_sw_init()
-> hwmgr_sw_init()
-> vega20_smu_init()
-> smu_v11_0_i2c_eeprom_control_init()
Fix simply adds HW support check (ras == NULL => no support) before
calling `smu_v11_0_i2c_eeprom_control_{init,fini}()`.
Please note that there is a chance that similar fix is also required for
CHIP_ARCTURUS. I do not know whether any actual Arcturus hardware without
RAS exist, and whether calling `smu_i2c_eeprom_init()` makes any sense
when there is no HW support.
Cc: stable@vger.kernel.org
Fixes: 9015d60c9e ("drm/amdgpu: Move EEPROM I2C adapter to amdgpu_device")
Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
Tested-by: Bjorn Nostvold <bjorn.nostvold@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Catch up with upstream, in particular to get c1e8d7c6a7 ("mmap locking
API: convert mmap_sem comments").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Switch over to GEM VRAM's implementation to retrieve bo->offset.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/372931/
Calculate GEM VRAM bo's offset within vram-helper without depending on
bo->offset.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/372938/
This patch removes slot->gpu_offset which is not required as
VRAM and PRIV slot are in separate PCI bar.
This patch also removes unused qxl_bo_gpu_offset()
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/372934/
Calculate GPU offset in radeon_bo_gpu_offset without depending on
bo->offset.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-and-tested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/372935/
GPU address should belong to driver not in memory management.
This patch moves ttm bo.offset and gpu_offset calculation to amdgpu driver.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/372930/
dw-mipi-dsi does not use any definition from drm_probe_helper.
Coverity output:
Event unnecessary_header:
Including .../include/drm/drm_probe_helper.h does not provide any
needed symbols.
Reviewed-by: Yannick Fertre <yannick.fertre@st.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Jose Abreu <jose.abreu@synopsys.com>
Signed-off-by: Angelo Ribeiro <angelo.ribeiro@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/171ff1fb3918664a570dc8f2f34b446612505f76.1585832665.git.angelo.ribeiro@synopsys.com
This contains a fairly random assortment of fixes for various minor
issues.
-----BEGIN PGP SIGNATURE-----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=wETg
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.8-rc3' of git://anongit.freedesktop.org/tegra/linux into drm-fixes
drm/tegra: Fixes for v5.8-rc3
This contains a fairly random assortment of fixes for various minor
issues.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200624165254.2763104-1-thierry.reding@gmail.com
The function kobject_init_and_add alloc memory like:
kobject_init_and_add->kobject_add_varg->kobject_set_name_vargs
->kvasprintf_const->kstrdup_const->kstrdup->kmalloc_track_caller
->kmalloc_slab, in err branch this memory not free. If use
kmemleak, this path maybe catched.
These changes are to add kobject_put in kobject_init_and_add
failed branch, fix potential memleak.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Regression was introduced where setting max bpc property has no effect
on the atomic check and final commit. It has the same effect as max bpc
being stuck at 8.
[How]
Correctly propagate max bpc with the new connector state.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Connector property output_bpc is available on DP/eDP only. New IGT tests
would benifit if this property works on HDMI.
[How]
Enable this read-only property on all types of connectors.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
In the past we had a pile of hacks to orchestrate access between fbdev
emulation and native kms clients. We've tried to streamline this, by
always preferring the kms side above fbdev calls when a drm master
exists, because drm master controls access to the display resources.
Unfortunately this breaks existing userspace, specifically Xorg. When
exiting Xorg first restores the console to text mode using the KDSET
ioctl on the vt. This does nothing, because a drm master is still
around. Then it drops the drm master status, which again does nothing,
because logind is keeping additional drm fd open to be able to
orchestrate vt switches. In the past this is the point where fbdev was
restored, as part of the ->lastclose hook on the drm side.
Now to fix this regression we don't want to go back to letting fbdev
restore things whenever it feels like, or to the pile of hacks we've
had before. Instead try and go with a minimal exception to make the
KDSET case work again, and nothing else.
This means that if userspace does a KDSET call when switching between
graphical compositors, there will be some flickering with fbcon
showing up for a bit. But a) that's not a regression and b) userspace
can fix it by improving the vt switching dance - logind should have
all the information it needs.
While pondering all this I'm also wondering wheter we should have a
SWITCH_MASTER ioctl to allow race-free master status handover. But
that's for another day.
v2: Somehow forgot to cc all the fbdev people.
v3: Fix typo Alex spotted.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208179
Cc: shlomo@fastmail.com
Reported-and-Tested-by: shlomo@fastmail.com
Cc: Michel Dänzer <michel@daenzer.net>
Fixes: 64914da24e ("drm/fbdev-helper: don't force restores")
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.7+
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Qiujun Huang <hqjagain@gmail.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200624092910.3280448-1-daniel.vetter@ffwll.ch
clk_s is checked twice in a row in ni_init_smc_spll_table().
fb_div should be checked instead.
Fixes: 69e0b57a91 ("drm/radeon/kms: add dpm support for cayman (v5)")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The spec requires enabling the MST Virtual Channel payload allocation
- in a separate step - after the transcoder is enabled, follow this.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200623082411.3889-1-imre.deak@intel.com
The atomic helpers try really hard to not lose track of things,
duplicating enabled tracking in the driver is at best confusing.
Double-enabling or disabling is a bug in atomic helpers.
In the fb_dirty function we can just assume that the fb always exists,
simple display pipe helpers guarantee that the crtc is only enabled
together with the output, so we always have a primary plane around.
Now in the update function we need to be a notch more careful, since
that can also get called when the crtc is off. And we don't want to
upload frames when that's the case, so filter that out too.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612160056.2082681-7-daniel.vetter@ffwll.ch
Same patch as the mipi-dbi one, atomic tracks this for us already, we
just have to check the right thing.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612160056.2082681-8-daniel.vetter@ffwll.ch
UAPI Changes:
- Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline.
Cross-subsystem Changes:
- Assorted devicetree binding updates.
- Add might_sleep() to dma_fence_wait().
- Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages.
- Small cleanup with IS_BUILTIN in video/fbdev drivers.
- Fix video/hdmi coding style for infoframe size.
Core Changes:
- Silence vblank output during init.
- Fix DP-MST corruption during send msg timeout.
- Clear leak in drm_gem_objecs_lookup().
- Make newlines work with force connector attribute.
- Fix module refcounting error in drm_encoder_slave, and use new i2c api.
- Header fix for drm_managed.c
- More struct_mutex removal for !legacy drivers:
- Remove gem_free_object()
- Removal of drm_gem_object_put_unlocked().
- Show current->comm alongside pid in debug printfs.
- Add drm_client_modeset_check() + drm_client_framebuffer_flush().
- Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits.
- Remove mode->vrefresh, and compactify drm_display_mode.
- Use drm_* macros for logging and warnings.
- Add WARN when drm_gem_get_pages is used on a private obj.
- Handle importing and imported dmabuf better in shmem helpers.
- Small fix for drm/mm hole size comparison, and remove invalid entry optimization.
- Add a drm/mm selftest.
- Set DSI connector type for DSI panels.
- Assorted small fixes and documentation updates.
- Fix DDI I2C device registration for MST ports, and flushing on destroy.
- Fix master_set return type, used by vmwgfx.
- Make the drm_set/drop_master ioctl symmetrical.
Driver Changes:
Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4 (multiple), i915.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE TX26D202VM0BWA panel.
- Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte.
- Remove gem_print_info.
- Improve gem_create_object_helper so udl can use shmem helpers.
- Convert vc4 dt bindings to schemas, and add clock properties.
- Device initialization cleanups for mgag200.
- Add a workaround to fix DP-MST short pulses handling on broken hardware in i915.
- Allow build test compiling arm drivers.
- Use managed pci functions in mgag200 and ast.
- Use dev_groups in malidp.
- Add per pixel alpha support for PX30 VOP in rockchip.
- Silence deferred probe logs in panfrost.
-----BEGIN PGP SIGNATURE-----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=ZmKI
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-06-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.9:
UAPI Changes:
- Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline.
Cross-subsystem Changes:
- Assorted devicetree binding updates.
- Add might_sleep() to dma_fence_wait().
- Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages.
- Small cleanup with IS_BUILTIN in video/fbdev drivers.
- Fix video/hdmi coding style for infoframe size.
Core Changes:
- Silence vblank output during init.
- Fix DP-MST corruption during send msg timeout.
- Clear leak in drm_gem_objecs_lookup().
- Make newlines work with force connector attribute.
- Fix module refcounting error in drm_encoder_slave, and use new i2c api.
- Header fix for drm_managed.c
- More struct_mutex removal for !legacy drivers:
- Remove gem_free_object()
- Removal of drm_gem_object_put_unlocked().
- Show current->comm alongside pid in debug printfs.
- Add drm_client_modeset_check() + drm_client_framebuffer_flush().
- Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits.
- Remove mode->vrefresh, and compactify drm_display_mode.
- Use drm_* macros for logging and warnings.
- Add WARN when drm_gem_get_pages is used on a private obj.
- Handle importing and imported dmabuf better in shmem helpers.
- Small fix for drm/mm hole size comparison, and remove invalid entry optimization.
- Add a drm/mm selftest.
- Set DSI connector type for DSI panels.
- Assorted small fixes and documentation updates.
- Fix DDI I2C device registration for MST ports, and flushing on destroy.
- Fix master_set return type, used by vmwgfx.
- Make the drm_set/drop_master ioctl symmetrical.
Driver Changes:
Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4 (multiple), i915.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE TX26D202VM0BWA panel.
- Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte.
- Remove gem_print_info.
- Improve gem_create_object_helper so udl can use shmem helpers.
- Convert vc4 dt bindings to schemas, and add clock properties.
- Device initialization cleanups for mgag200.
- Add a workaround to fix DP-MST short pulses handling on broken hardware in i915.
- Allow build test compiling arm drivers.
- Use managed pci functions in mgag200 and ast.
- Use dev_groups in malidp.
- Add per pixel alpha support for PX30 VOP in rockchip.
- Silence deferred probe logs in panfrost.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/001cd9a6-405d-4e29-43d8-354f53ae4e8b@linux.intel.com
Make sure we pass through ret label to unlock the mutex.
Signed-off-by: John van der Kamp <sjonny@suffe.me.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Implement the drm_bridge_funcs .detect() and .get_edid() operations, and
call drm_bridge_hpd_notify() notify to report HPD. This provides the
necessary API to support disabling connector creation, do so by
accepting DRM_BRIDGE_ATTACH_NO_CONNECTOR in dw_hdmi_bridge_attach().
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-23-laurent.pinchart+renesas@ideasonboard.com
To prepare for making connector creation optional in the driver, pass
the drm_connector explicitly to the internal functions that require it.
The functions that still access the connector from the dw_hdmi structure
are dw_hdmi_connector_create() and __dw_hdmi_probe(). The former access
is expected, as that's where the internal connector is created. The
latter will be addressed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-22-laurent.pinchart+renesas@ideasonboard.com
Store the connector that the bridge is currently wired to in the dw_hdmi
structure. This is currently identical to the connector field, but will
differ once the driver supports disabling connector creation.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-21-laurent.pinchart+renesas@ideasonboard.com
To prepare for making connector creation optional in the driver, pass
the drm_display_info explicitly to dw_hdmi_support_scdc(). The pointer
is passed to the callers where required, particularly to the
dw_hdmi_phy_ops .init() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-19-laurent.pinchart+renesas@ideasonboard.com
Several internal functions take a drm_display_mode argument to configure
the HDMI encoder or the HDMI PHY. They must not modify the mode, make
the pointer const to enforce that.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-18-laurent.pinchart+renesas@ideasonboard.com
Replace the drm_connector pointer passed to the .mode_valid() function
with a const drm_display_info pointer, as that's all the function should
need. Use the display info passed to the bridge .mode_valid() operation
instead of retrieving it from the connector, to prepare for make
connector creation optional.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-16-laurent.pinchart+renesas@ideasonboard.com
The meson-dw-hdmi driver needs to access its own context from the
.mode_valid() operation. It currently gets it from the dev_private field
of the drm_device retrieved from the connector, which is a hack. Use the
private data passed to the .mode_valid() operation instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-15-laurent.pinchart+renesas@ideasonboard.com
The .configure_phy() operation takes a dw_hdmi_plat_data pointer as a
context argument. This differs from .mode_valid() that takes a custom
private context pointer, causing possible confusion. Make the
dw_hdmi_plat_data operations more consistent by passing the private
context pointer to .configure_phy() as well.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-13-laurent.pinchart+renesas@ideasonboard.com
Platform glue drivers for dw_hdmi may need to access device-specific
data from their .mode_valid() implementation. They currently have no
clean way to do so, and one driver hacks around it by accessing the
dev_private data of the drm_device retrieved from the connector.
Add a priv_data void pointer to the dw_hdmi_plat_data structure, and
pass it to the .mode_valid() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-12-laurent.pinchart+renesas@ideasonboard.com
When validating a mode, bridges may need to do so in the context of a
display, as specified by drm_display_info. An example is the meson
dw-hdmi bridge that needs to consider the YUV 4:2:0 output format to
perform clock calculations.
Bridges that need the display info currently retrieve it from the
drm_connector created by the bridge. This gets in the way of moving
connector creation out of bridge drivers. To make this possible, pass
the drm_display_info to drm_bridge_funcs .mode_valid().
Changes to the bridge drivers have been performed with the following
coccinelle semantic patch and have been compile-tested.
@ rule1 @
identifier funcs;
identifier fn;
@@
struct drm_bridge_funcs funcs = {
...,
.mode_valid = fn
};
@ depends on rule1 @
identifier rule1.fn;
identifier bridge;
identifier mode;
@@
enum drm_mode_status fn(
struct drm_bridge *bridge,
+ const struct drm_display_info *info,
const struct drm_display_mode *mode
)
{
...
}
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org> # for the nwl-dsi part:
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-11-laurent.pinchart+renesas@ideasonboard.com
The drm_hdmi_avi_infoframe_from_display_mode(),
drm_hdmi_vendor_infoframe_from_display_mode() and
drm_hdmi_avi_infoframe_quant_range() functions take a drm_connector that
they don't modify. Mark it as const.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-10-laurent.pinchart+renesas@ideasonboard.com
Instead of poking into the DT node of the next bridge for its DDC bus
and implementing the .get_modes() and .detect() connector operations
manually, retrieve the next bridge in the chain and delegate these
operations to it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-7-laurent.pinchart+renesas@ideasonboard.com
The drm_bridge_get_edid() function is documented to return an error
pointer on error. The underlying .get_edid() operation, however, returns
NULL on error, and so do the drm_get_edid() and drm_do_get_edid()
functions upon which .get_edid() is usually implemented. Make
drm_bridge_get_edid() return NULL on error to be consistent.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-6-laurent.pinchart+renesas@ideasonboard.com
Now that the driver supports all the connector-related bridge
operations, make the connector creation optional. This enables usage of
the adv7511 with the DRM bridge connector helper.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-5-laurent.pinchart+renesas@ideasonboard.com
Implement the bridge connector-related .get_edid(), .detect() and
.hpd_notify() operations, and report the related bridge capabilities.
Output status detection is implemented using the same backend as for the
DRM connector, but requires making mode retrieval at detection time
optional as no pointer to the connector is available to the bridge
.detect() operation. The reason for the need to retrieve modes at
detection time is unclear to me, and this may benefit from further
refactoring of hot plug handling code.
Hot plug detection is notified through the bridge HPD notification
framework when the bridge is used without creating a connector, and
falls back to the existing implementation otherwise. CEC handling of
disconnection is handled in the new .hpd_notify() operation in the new
code path.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-4-laurent.pinchart+renesas@ideasonboard.com
The main DRM device is actually a virtual device so it doesn't have the
iommus property, which is instead on the DMA masters, in this case the
mixers.
Add a call to of_dma_configure with the mixers DT node but on the DRM
virtual device to configure it in the same way than the mixers.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/9a4daf438dd3f2fe07afb23688bfb793a0613d7d.1589378833.git-series.maxime@cerno.tech
(cherry picked from commit b718102dbd)
[Maxime: Applied to -fixes since it missed the merge window and display is
broken without it]
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Function prepare_igt_frag() and get_insert_time() were casting
signed value to unsigned value before returning error.
So error check in igt_frag() would not work with unsigned
return value from get_insert_time() compared against negative
value.
Addresses-Coverity: ("Unsigned compared against 0, no effect")
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reported-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/370636/
Skipping just one branch of the tree is not the most
effective approach.
Instead use a macro to define the traversal functions and
sort out both branch sides.
This improves the performance of the unit tests by
a factor of more than 4.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Link: https://patchwork.freedesktop.org/patch/370298/
Abort early if there isn't enough space to allocate from a subtree.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Link: https://patchwork.freedesktop.org/patch/370297/
The Acer S1003 has proper DMI strings for sys-vendor and product-name,
so we do not need to match by BIOS-date.
This means that the Acer S1003 can use the generic lcd800x1280_rightside_up
drm_dmi_panel_orientation_data struct which is also used by other quirks.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200531093025.28050-2-hdegoede@redhat.com
Like the Asus T100HA the Asus T101HA also uses a panel which has been
mounted 90 degrees rotated, albeit in the opposite direction.
Add a quirk for this.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200531093025.28050-1-hdegoede@redhat.com
During encoder enabling we clear the flag before starting the ACT
sequence and wait for the flag, but the clearing is missing during
encoder disabling, add it there too. Since nothing cleared the flag
automatically we could've run subsequent disabling steps too early.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200616141855.746-5-imre.deak@intel.com
It's not clear if the DP_TP_STATUS flags other than the ACT sent flag
have some side-effect, so don't clear those; we don't depend on the
state of these flags anyway.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200616141855.746-4-imre.deak@intel.com
During transcoder enabling we'll configure the transcoder in MST mode
and enable the VC payload allocation, which will start the ACT sequence.
Before waiting for the ACT sequence completion, we need to clear the ACT
sent flag, but based on the above we can do this right before enabling
the transcoder.
For clarity, move the flag clearing closer to where we wait for it.
While at it also factor out some common code.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200616141855.746-3-imre.deak@intel.com
During the initial probing of an MST sink, MST core will determine the
sink's link bandwidth based on its own version of the sink link
rate/lane count caps it reads from the DPCD. At a later point (after
probing and 1 or more modesets) i915 may limit the link parameters wrt.
the original source/sink common caps above due to link training failures
during a modeset and the resulting link training fallback logic.
Based on the above a modeset following another modeset with a link
training error will compute the i915 HW specific and DP protocol timing
parameters (data/link M/N and MST TU values) taking into account only
the unlimited source/sink common caps, but not taking into account the
fallback limits. This will also let DRM core oversubscribe the actual
link bandwidth during the MST payload allocation.
Prevent the above problem by disabling the link training fallback on MST
links for now, until the MST probe time initialization and the MST
compute config logic can deal with changing link parameters.
The misconfigured timings lead at least to a
'Timed out waiting for DP idle patterns'
error.
v2: (Ville)
- Print link training error message on the MST path too.
- Clarify the problem in the commit log.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200616211146.23027-2-imre.deak@intel.com
MST encoders must use the master MST transcoder's DP_TP_STATUS and
DP_TP_CONTROL registers. Atm, during the HW readout of an MST encoder
connected to a slave transcoder we reset these register addresses in
intel_dp::regs.dp_tp_* to the slave transcoder's DP_TP_* register
addresses incorrectly; fix this.
One example where the above overwite happens is the encoder HW state
validation after enabling multiple streams; see
intel_dp_mst_enc_get_config(). After that during disabling any stream
we'll get a
'Timed out waiting for ACT sent when disabling'
error, due to reading from the incorrect DP_TP_STATUS register.
This change replaces
https://patchwork.freedesktop.org/patch/369577/?series=78193&rev=1
which just papered over the problem.
v2:
- Correct the failure scenario in the commit log. (José)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200616211146.23027-1-imre.deak@intel.com
Start using device specific parameters instead of module parameters for
most things. The module parameters become the immutable initial values
for i915 parameters. The device specific parameters in i915->params
start life as a copy of i915_modparams. Any later changes are only
reflected in the debugfs.
The stragglers are:
* i915.force_probe and i915.modeset. Needed before dev_priv is
available. This is fine because the parameters are read-only and never
modified.
* i915.verbose_state_checks. Passing dev_priv to I915_STATE_WARN and
I915_STATE_WARN_ON would result in massive and ugly churn. This is
handled by not exposing the parameter via debugfs, and leaving the
parameter writable in sysfs. This may be fixed up in follow-up work.
* i915.inject_probe_failure. Only makes sense in terms of the module,
not the device. This is handled by not exposing the parameter via
debugfs.
v2: Fix uc i915 lookup code (Michał Winiarski)
Cc: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200618150402.14022-1-jani.nikula@intel.com
msm_gem_address_space_create() changed to take a start/length instead
of a start/end for the iova space but all of the callers were just
cut and pasted from the old usage. Most of the mistakes have been fixed
up so just catch up the rest.
Fixes: ccac7ce373 ("drm/msm: Refactor address space initialization")
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Converts the ast driver to drm_info(), drm_err() and drm_WARN_*(). No
functional changes are made.
v2:
* also convert WARN_*() macros
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200617080340.29584-5-tzimmermann@suse.de
All upcasting from struct drm_device to struct ast_private is now
performed via to_ast_private(). Using struct drm_device.dev_private
is deprecated. The ast variable in ast_crtc_helper_atomic_check() is
unused, so removed it.
v2:
* fix typo in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200617080340.29584-4-tzimmermann@suse.de
The ast driver contains code paths for AST 1180 chips. The chip is not
supported and the rsp code has never been tested. Simplify the driver by
removing the AST 1180 code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200617080340.29584-2-tzimmermann@suse.de
Export finalize function to client which helps append eoc and jump
command to pkt. Let client decide call finalize or not.
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/1592749115-24158-9-git-send-email-dennis-yc.hsieh@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add support for the CDTech Electronics displays S070PWS19HP-FC21
(7.0" WSVGA) and S070SWV29HG-DC44 (7.0" WVGA) to panel-simple.
Signed-off-by: Michael Krummsdorf <michael.krummsdorf@tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612072219.13669-4-matthias.schiffer@ew.tq-group.com
The LogicPD Type28 display used by several Logic PD products has not
worked since v5.6.
The connector type for the LogicPD Type 28 display is missing and
drm_panel_bridge_add() requires connector type to be set.
Signed-off-by: Adam Ford <aford173@gmail.com>
Fixes: 0d35408afb ("drm/panel: simple: Add Logic PD Type 28 display support")
Cc: Adam Ford <aford173@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.6+
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200615131934.12440-1-aford173@gmail.com
Pull i2c fixes from Wolfram Sang:
- a small collection of remaining API conversion patches (all acked)
which allow to finally remove the deprecated API
- some documentation fixes and a MAINTAINERS addition
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Add robert and myself as qcom i2c cci maintainers
i2c: smbus: Fix spelling mistake in the comments
Documentation/i2c: SMBus start signal is S not A
i2c: remove deprecated i2c_new_device API
Documentation: media: convert to use i2c_new_client_device()
video: backlight: tosa_lcd: convert to use i2c_new_client_device()
x86/platform/intel-mid: convert to use i2c_new_client_device()
drm: encoder_slave: use new I2C API
drm: encoder_slave: fix refcouting error for modules
The tfp410 has a data de-skew feature that allows the user to compensate
the skew between IDCK and the pixel data and control signals.
In the driver, the setup and hold times are calculated from the de-skew
value. This retrieves the deskew value from the DT using the proper
datatype and range check as described by the binding (u32 from 0 to 7).
This fix results from a change in the ti,tfp410 DT binding.
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200617094633.19663-4-ricardo.canuelo@collabora.com
The DRM panel bridge core requires connector type to be set up properly,
otherwise it rejects the panel. The missing connector type problem popped
up while I was trying to wrap CLAA070WP03XG panel into a DRM bridge in
order to test whether panel's rotation property work properly using
panel-simple driver on NVIDIA Tegra30 Nexus 7 tablet device, which uses
CLAA070WP03XG display panel.
The NVIDIA Tegra DRM driver recently gained DRM bridges support for the
RGB output and now driver wraps directly-connected panels into DRM bridge.
Hence all panels should have connector type set properly now, otherwise
the panel's wrapping fails.
This patch adds missing connector types for the LVDS panels that are found
on NVIDIA Tegra devices:
1. AUO B101AW03
2. Chunghwa CLAA070WP03XG
3. Chunghwa CLAA101WA01A
4. Chunghwa CLAA101WB01
5. EDT ET057090DHU
6. Innolux N156BGE L21
7. Samsung LTN101NT05
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200617222703.17080-8-digetx@gmail.com
It's not necessary to unregister backlight device which
registered with devm_backlight_device_register().
Fixes: 12a6cbd4f3 ("drm/panel: otm8009a: Use new backlight API")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200618134650.44311-1-weiyongjun1@huawei.com
We only emit the renderstate once now during module load, it is no
longer a concern that we are delaying context creation and so do not
need to so eagerly optimise. Since the last time we have looked at the
renderstate, we have a pin_map / flush_map facility that supports simple
single mappings, replacing the open-coded kmap_atomic() and
prepare_write. As it should be a single page, of which we only write a
small portion, we stick to a simple WB [kmap] and use clflush on !llc
platforms, rather than creating a temporary WC vmapping for the single
page.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200619234543.17499-2-chris@chris-wilson.co.uk
Since gvt calls pin_map for the shadow batch buffer, this makes the
action of prepare_write [+pin_pages] redundant. We can write into the
obj->mm.mapping directory and the flush_map routine knows when it has to
flush the cpu cache afterwards.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200619234543.17499-1-chris@chris-wilson.co.uk
Smatch warns that we may iterate over an empty array of gt->engines[].
One hopes that this is impossible, but nevertheless we can simply
appease smatch by initialising the timestamp to zero before we starting
probing the busy-time from the engines.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200619151938.21740-1-chris@chris-wilson.co.uk
Shifting the integer value 1 is evaluated using 32-bit arithmetic
and then used in an expression that expects a long value leads to
a potential integer overflow. Fix this by using the BIT macro to
perform the shift to avoid the overflow.
Addresses-Coverity: ("Unintentional integer overflow")
Fixes: ad49f8602f ("drm/arm: Add support for Mali Display Processors")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200618100400.11464-1-colin.king@canonical.com
DRM_FORMAT_NV15 is a 2 plane format suitable for linear and 16x16
block-linear memory layouts (DRM_FORMAT_MOD_SAMSUNG_16_16_TILE). The
format is similar to P010 with 4:2:0 sub-sampling but has no padding
between components. Instead, luminance and chrominance samples are
grouped into 4s so that each group is packed into an integer number
of bytes:
YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes
The '15' suffix refers to the optimum effective bits per pixel which is
achieved when the total number of luminance samples is a multiple of 8.
Q410 and Q401 are both 3 plane non-subsampled formats with 16 bits per
component, but only 10 bits are used and 6 are padded. 'Q' is chosen
as the first letter to denote 3 plane YUV444, (and is the next letter
along from P which is usually 2 plane).
V2: Updated block_w of NV15 to {4, 2, 0}
V3: Updated commit message to include specific modifier name
NV15:
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Ben Davis <ben.davis@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200601162817.18230-1-ben.davis@arm.com
The caller expects panfrost_job_hw_submit() to increase
runtime PM usage counter. The refcount decrement on the
error branch of WARN_ON() will break the counter balance
and needs to be removed.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200522134109.27204-1-dinghao.liu@zju.edu.cn
The calls to panfrost_devfreq_record_busy() and
panfrost_devfreq_record_idle() must be balanced to ensure that the
devfreq utilisation is correctly reported. But there are two cases where
this doesn't work correctly.
In panfrost_job_hw_submit() if pm_runtime_get_sync() fails or the
WARN_ON() fires then no call to panfrost_devfreq_record_busy() is made,
but when the job times out the corresponding _record_idle() call is
still made in panfrost_job_timedout(). Move the call up to ensure that
it always happens.
Secondly panfrost_job_timedout() only makes a single call to
panfrost_devfreq_record_idle() even if it is cleaning up multiple jobs.
Move the call inside the loop to ensure that the number of
_record_idle() calls matches the number of _record_busy() calls.
Fixes: 9e62b885f7 ("drm/panfrost: Simplify devfreq utilisation tracking")
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200522153653.40754-1-steven.price@arm.com
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200617220331.GA19550@embeddedor
i2c_new_client() is deprecated, use the replacement
i2c_new_client_device(). Also, we have a helper to check if a driver is
bound. Use it to simplify the code. Note that this changes the errno for
a failed device creation from ENOMEM to ENODEV. No callers currently
interpret this errno, though, so we use this condensed error check.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
module_put() balances try_module_get(), not request_module(). Fix the
error path to match that.
Fixes: 2066facca4 ("drm/kms: slave encoder interface.")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
All the NULL checks are pointless, clk_*() routines already deal with NULL
just fine.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
It is always present. It was documented as mandatory prior to
commit 90aeca875f ("dt-bindings: display: Convert etnaviv to
json-schema").
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
There might be good reasons why the getting a clock failed. To treat the
clocks as optional we're specifically only interested in ignoring -ENOENT,
and devm_clk_get_optional() does just that.
Note that this preserves the original behavior of all clocks being
optional. The binding document mandates the "bus" clock while the dove
machine only specifies "core".
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Since commit 65f037e8e9 ("drm/etnaviv: add support for slave interface
clock") the reg clock is enabled before the bus clock and we need to undo
its enablement on error.
Fixes: 65f037e8e9 ("drm/etnaviv: add support for slave interface clock")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
This code was using get_user_pages*(), in a "Case 2" scenario
(DMA/RDMA), using the categorization from [1]. That means that it's
time to convert the get_user_pages*() + put_page() calls to
pin_user_pages*() + unpin_user_pages() calls.
There is some helpful background in [2]: basically, this is a small
part of fixing a long-standing disconnect between pinning pages, and
file systems' use of those pages.
[1] Documentation/core-api/pin_user_pages.rst
[2] "Explicit pinning of user-space pages":
https://lwn.net/Articles/807108/
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The ti_sn_bridge_gpio_set() got the return value of
regmap_update_bits() but didn't check it. The function can't return
an error value, but we should at least print a warning if it didn't
work.
This fixes a compiler warning about setting "ret" but not using it.
Fixes: 27ed2b3f22 ("drm/bridge: ti-sn65dsi86: Export bridge GPIOs to Linux")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612123003.v2.4.Ia4376fd88cdc6e8f8b43c65548458305f82f1d61@changeid
When building we were getting an error:
warning: cannot understand function prototype:
'const unsigned int ti_sn_bridge_dp_rate_lut[] = '
Arrays aren't supposed to be marked with "/**" kerneldoc comments. Fix.
Fixes: a095f15c00 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612123003.v2.2.If3807e4ebf7f0440f64c3069edcfac9a70171940@changeid
The kernel test robot noted that if "OF" is defined (which is needed
to select DRM_TI_SN65DSI86 at all) but not OF_GPIO that we'd get
compile failures because some of the members that we access in "struct
gpio_chip" are only defined "#if defined(CONFIG_OF_GPIO)".
All the GPIO bits in the driver are all nicely separated out. We'll
guard them with the same "#if defined" that the header has and add a
little stub function if OF_GPIO is not defined.
Fixes: 27ed2b3f22 ("drm/bridge: ti-sn65dsi86: Export bridge GPIOs to Linux")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612123003.v2.1.Ibe95d8f3daef01e5c57d4c8c398f04d6a839492c@changeid
There is no point to print deferred probe (and its failures to get
resources) as an error. Also there is no need to print regulator errors
twice.
In case of multiple probe tries this would pollute the dmesg.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527200544.7849-1-krzk@kernel.org
Return the monotonic timestamp (ktime_get()) at the time of sampling the
busy-time. This is used in preference to taking ktime_get() separately
before or after the read seqlock as there can be some large variance in
reported timestamps. For selftests trying to ascertain that we are
reporting accurate to within a few microseconds, even a small delay
leads to the test failing.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200617130916.15261-2-chris@chris-wilson.co.uk
A couple of very simple tests to ensure that the basic properties of
per-engine busyness accounting [0% and 100% busy] are faithful.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200617130916.15261-1-chris@chris-wilson.co.uk
We don't want it under CONFIG_DRM_MSM_GPU_STATE, we need it all the
time (like the other GPUs do).
Fixes: ccac7ce373 ("drm/msm: Refactor address space initialization")
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Previously the address space went from 16M to ~0u, but with the
refactor one of the 'f's was dropped, limiting us to 256MB.
Additionally, the new interface takes a start and size, not start and
end, so we can't just copy and paste.
Fixes regressions in dEQP-VK.memory.allocation.random.*
Fixes: ccac7ce373 ("drm/msm: Refactor address space initialization")
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add rename the gpu busy percentage for consistency and
add the mem busy percentage documentation.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vega10 and previous asics use one interface, vega20 and newer
use another.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The existing code used the major version number of the DRM driver
instead of the device major number of the DRM subsystem for
validating access for a devices cgroup.
This meant that accesses allowed by the devices cgroup weren't
permitted and certain accesses denied by the devices cgroup were
permitted (if they matched the wrong major device number).
Signed-off-by: Lorenz Brun <lorenz@brun.one>
Fixes: 6b855f7b83 ("drm/amdkfd: Check against device cgroup")
Reviewed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Compared to its predecessors, the PX30 VOP has a different register layout
for enabling per-pixel alpha. Instead of src_alpha_ctl and dst_alpha_ctl,
there is a single alpha control register. This register takes some fields
from src_alpha_ctl, but with a different layout.
Add support for the required fields to the PX30 VOP window descriptions,
which makes per-pixel-alpha formats behave correctly.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200416140526.262533-1-paul.kocialkowski@bootlin.com
Using _MASKED_BIT_ENABLE macro to set mask register bits is straight
forward and not likely to go wrong. However when checking which bit(s)
is(are) enabled, simply bitwise AND value and _MASKED_BIT_ENABLE() won't
output expected result. Suppose the register write is disabling bit 1
by setting 0xFFFF0000, however "& _MASKED_BIT_ENABLE(1)" outputs
0x00010000, and the non-zero check will pass which cause the old code
consider the new value set as an enabling operation.
We found guest set 0x80008000 on boot, and set 0xffff8000 during resume.
Both are legal settings but old code will block latter and force vgpu
enter fail-safe mode.
Introduce two new macro and make proper masked bit check in mmio handler:
IS_MASKED_BITS_ENABLED()
IS_MASKED_BITS_DISABLED()
V2: Rebase.
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200601030721.17129-1-colin.xu@intel.com
Like live_unlite_ring, but instead of simply looking at the impact of
intel_ring_direction(), check that preemption more generally works with
different depths of queued requests in the ring.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200616233733.18050-1-chris@chris-wilson.co.uk
Not too long ago, we realised we had issues with a rolling back a
context so far for a preemption request we considered the resubmit not
to be a rollback but a forward roll. This means we would issue a lite
restore instead of forcing a full restore, continuing execution of the
old requests rather than causing a preemption. Add a selftest to
exercise such a far rollback, such that if we were to skip the full
restore, we would execute invalid instructions in the ring and hang.
Note that while I was able to confirm that this causes us to do a
lite-restore preemption rollback (with commit e36ba817fa ("drm/i915/gt:
Incrementally check for rewinding") disabled), it did not trick the HW
into rolling past the old RING_TAIL. Myybe on other HW.
References: e36ba817fa ("drm/i915/gt: Incrementally check for rewinding")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200616185518.11948-1-chris@chris-wilson.co.uk
One i915_request_await_object is enough and we keep the one under the
object lock so it is final.
At the same time move async clflushing setup under the same locked
section and consolidate common code into a helper function.
v2:
* Emit initial breadcrumbs after aways are set up. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200615151449.32605-1-tvrtko.ursulin@linux.intel.com
Unable to handle kernel NULL pointer dereference at virtual address 00000918
pgd = (ptrval)
[00000918] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.7.0-15001-gfa384b50b96b-dirty #514
Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support)
PC is at mcde_display_enable+0x78/0x7c0
LR is at mcde_display_enable+0x78/0x7c0
Fix this by using to_mcde() as in other functions.
Fixes: fd7ee85cfe ("drm/mcde: Don't use drm_device->dev_private")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200613223027.4189309-2-linus.walleij@linaro.org
The following bug appeared in the MCDE driver/display
initialization during the recent merge window.
First the place we call drm_fbdev_generic_setup() in the
wrong place: this needs to be called AFTER calling
drm_dev_register() else we get this splat:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at ../drivers/gpu/drm/drm_fb_helper.c:2198 drm_fbdev_generic_setup+0x164/0x1a8
mcde a0350000.mcde: Device has not been registered.
Modules linked in:
Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support)
[<c010e704>] (unwind_backtrace) from [<c010a86c>] (show_stack+0x10/0x14)
[<c010a86c>] (show_stack) from [<c0414f38>] (dump_stack+0x9c/0xb0)
[<c0414f38>] (dump_stack) from [<c0121c8c>] (__warn+0xb8/0xd0)
[<c0121c8c>] (__warn) from [<c0121d18>] (warn_slowpath_fmt+0x74/0xb8)
[<c0121d18>] (warn_slowpath_fmt) from [<c04b154c>] (drm_fbdev_generic_setup+0x164/0x1a8)
[<c04b154c>] (drm_fbdev_generic_setup) from [<c04ed278>] (mcde_drm_bind+0xc4/0x160)
[<c04ed278>] (mcde_drm_bind) from [<c04f06b8>] (try_to_bring_up_master+0x15c/0x1a4)
(...)
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200613223027.4189309-1-linus.walleij@linaro.org
Since these inline routines only return the desired pointer from the
i915_request(after checking the preconditions for acquiring said
pointer), they can be const.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200616183139.4061-1-chris@chris-wilson.co.uk
Fix inconsistent IS_ERR and PTR_ERR in live_timeslice_nopreempt().
The proper pointer to be passed as argument to PTR_ERR() is ce.
This bug was detected with the help of Coccinelle.
Fixes: b72f02d78e ("drm/i915/gt: Prevent timeslicing into unpreemptable requests")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200616145452.GA25291@embeddedor
I broke that in my refactoring:
commit 7d2cd72a9a
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri May 29 16:05:42 2020 +0200
drm/shmem-helpers: Simplify dma-buf importing
I'm not entirely sure of the history here, but I suspect that in one
of the rebases or when applying the patch I moved the hunk from
drm_gem_shmem_prime_import_sg_table(), where it should be, to
drm_gem_shmem_create_with_handle(), which is totally wrong.
Remedy this.
Thanks for Thomas for the crucial hint in debugging this.
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 7d2cd72a9a ("drm/shmem-helpers: Simplify dma-buf importing")
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200616114723.2363268-1-daniel.vetter@ffwll.ch
As of commit 4dc55525b0 ("drm: plane: Verify that no or all planes
have a zpos property") a warning is emitted if there's a mix of planes
with and without a zpos property.
On Tegra, cursor planes are always composited on top of all other
planes, which is why they never had a zpos property attached to them.
However, since the composition order is fixed, this is trivial to
remedy by simply attaching an immutable zpos property to them.
v3: do not hardcode zpos for overlay planes used as cursor (Dmitry)
v2: hardcode cursor plane zpos to 255 instead of 0 (Ville)
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Currently when a host1x device driver is unregistered, it is not
detached from the host1x controller, which means that the device
will stay around and when the driver is registered again, it may
bind to the old, stale device rather than the new one that was
created from scratch upon driver registration. This in turn can
cause various weird crashes within the driver core because it is
confronted with a device that was already deleted.
Fix this by detaching the driver from the host1x controller when
it is unregistered. This ensures that the deleted device also is
no longer present in the device list that drivers will bind to.
Reported-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Allows us to remove a bit of cleanup code.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Y.C. Chen" <yc_chen@aspeedtech.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-58-daniel.vetter@ffwll.ch
In order to remove the dependency on the simple-bus compatible string,
which causes the OF driver core to register all child devices, make the
display-hub driver explicitly register the display controller children.
Signed-off-by: Thierry Reding <treding@nvidia.com>
In order to remove the dependency on the simple-bus compatible string,
which causes the OF driver core to register all child devices, make the
host1x driver explicitly register its children.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Though the unconditional enable/disable code is not a final solution,
we don't want to run into a NULL pointer situation when window group
doesn't link to its DC parent if the DC is disabled in Device Tree.
So this patch simply adds a check to make sure that window group has
a valid parent before running into tegra_windowgroup_enable/disable.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
host1x_debug_init() must be reverted in an error handling path.
This is already fixed in the remove function since commit 44156eee91
("gpu: host1x: Clean up debugfs on removal")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl7mfkAeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGTG4H/1iH1Psd32XKoO63
XuOashbqnsYLCKckbFg0RgHIDTp6d0wypF5m3dSYqpifWUaEf8SkTGnm0geV9zc1
axDUdaqr+OvhDPZiSLt4cFu2M5yvGb4/WR76qjKzxWd+LNUGOVpx1GvFXl/5wPdp
/lYR3mqZqNffwK2QuZ1m8X1gy5fzr4esoyZDK71dP88uBlFmbQLJsYiCRfQ7GDsm
r574gz7SKjPoPFPj7qJ3CLsnOruZiL36uxmYZWC2hnkNaFzLfMFiE7OqrEZK/YV6
Gc8ZZGtN+Otr+UbojagjTjRM6uy3qWBYEMX4GcRt9M2jS8LGKsYcxV75h0U5qlyz
m8QAA0o=
=jy/I
-----END PGP SIGNATURE-----
Merge v5.8-rc1 into drm-misc-fixes
Beginning a new release cycles for what will become v5.8. Updating
drm-misc-fixes accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Since the PWM framework is switching struct pwm_state.duty_cycle's
datatype to u64, prepare for this transition by using DIV_ROUND_UP_ULL
to handle a 64-bit dividend.
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
For all ddi, encoder->type holds output type as ddi,
assigning it to individual o/p types is no more valid.
Fixes: 362bfb995b ("drm/i915/tgl: Add DKL PHY vswing table for HDMI")
v2: Rebase, no functional change.
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612082237.11886-1-vandita.kulkarni@intel.com
(cherry picked from commit 94641eb6c6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Rescue the GT workarounds from being buried inside init_clock_gating so
that we remember to apply them after a GT reset, and that they are
included in our verification that the workarounds are applied.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200611080140.30228-6-chris@chris-wilson.co.uk
(cherry picked from commit 2bcefd0d26)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Rescue the GT workarounds from being buried inside init_clock_gating so
that we remember to apply them after a GT reset, and that they are
included in our verification that the workarounds are applied.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200611080140.30228-5-chris@chris-wilson.co.uk
(cherry picked from commit 806a45c083)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Rescue the GT workarounds from being buried inside init_clock_gating so
that we remember to apply them after a GT reset, and that they are
included in our verification that the workarounds are applied.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200611080140.30228-4-chris@chris-wilson.co.uk
(cherry picked from commit c3b93a943f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Rescue the GT workarounds from being buried inside init_clock_gating so
that we remember to apply them after a GT reset, and that they are
included in our verification that the workarounds are applied.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200611080140.30228-3-chris@chris-wilson.co.uk
(cherry picked from commit 7331c356b6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Rescue the GT workarounds from being buried inside init_clock_gating so
that we remember to apply them after a GT reset, and that they are
included in our verification that the workarounds are applied.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200611080140.30228-2-chris@chris-wilson.co.uk
(cherry picked from commit 19f1f627b3)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Rescue the GT workarounds from being buried inside init_clock_gating so
that we remember to apply them after a GT reset, and that they are
included in our verification that the workarounds are applied.
v2: Leave HSW_SCRATCH to set an explicit value, not or in our disable
bit.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2011
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200611093015.11370-1-chris@chris-wilson.co.uk
(cherry picked from commit f93ec5fb56)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
According to BSpec the Data Island Packet should be disabled after
disabling the transcoder, but before the transcoder clock select is set
to none. On an ICL RVP, daisy-chained MST config not following this
leads to a hang with the following MCE when disabling the output:
[ 870.948739] mce: [Hardware Error]: CPU 0: Machine Check Exception: 5 Bank 6: ba00000011000402
[ 871.019212] mce: [Hardware Error]: RIP !INEXACT! 10:<ffffffff81aca652> {poll_idle+0x92/0xb0}
[ 871.019212] mce: [Hardware Error]: TSC 135a261fe61
[ 871.019212] mce: [Hardware Error]: PROCESSOR 0:706e5 TIME 1591739604 SOCKET 0 APIC 0 microcode 20
[ 871.019212] mce: [Hardware Error]: Run the above through 'mcelog --ascii'
[ 871.019212] mce: [Hardware Error]: Machine check: Processor context corrupt
[ 871.019212] Kernel panic - not syncing: Fatal machine check
[ 871.019212] Kernel Offset: disabled
Bspec: 4287
Fixes: fa37a21327 ("drm/i915: Stop sending DP SDPs on ddi disable")
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609220616.6015-1-imre.deak@intel.com
(cherry picked from commit c980216dd2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
In commit 5ba32c7be8 ("drm/i915/execlists: Always force a context
reload when rewinding RING_TAIL"), we placed the check for rewinding a
context on actually submitting the next request in that context. This
was so that we only had to check once, and could do so with precision
avoiding as many forced restores as possible. For example, to ensure
that we can resubmit the same request a couple of times, we include a
small wa_tail such that on the next submission, the ring->tail will
appear to move forwards when resubmitting the same request. This is very
common as it will happen for every lite-restore to fill the second port
after a context switch.
However, intel_ring_direction() is limited in precision to movements of
upto half the ring size. The consequence being that if we tried to
unwind many requests, we could exceed half the ring and flip the sense
of the direction, so missing a force restore. As no request can be
greater than half the ring (i.e. 2048 bytes in the smallest case), we
can check for rollback incrementally. As we check against the tail that
would be submitted, we do not lose any sensitivity and allow lite
restores for the simple case. We still need to double check upon
submitting the context, to allow for multiple preemptions and
resubmissions.
Fixes: 5ba32c7be8 ("drm/i915/execlists: Always force a context reload when rewinding RING_TAIL")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Bruce Chang <yu.bruce.chang@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609151723.12971-1-chris@chris-wilson.co.uk
(cherry picked from commit e36ba817fa)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We have a I915_REQUEST_NOPREEMPT flag that we set when we must prevent
the HW from preempting during the course of this request. We need to
honour this flag and protect the HW even if we have a heartbeat request,
or other maximum priority barrier, pending. As such, restrict the
timeslicing check to avoid preempting into the topmost priority band,
leaving the unpreemptable requests in blissful peace running
uninterrupted on the HW.
v2: Set the I915_PRIORITY_BARRIER to be less than
I915_PRIORITY_UNPREEMPTABLE so that we never submit a request
(heartbeat or barrier) that can legitimately preempt the current
non-premptable request.
Fixes: 2a98f4e65b ("drm/i915: add infrastructure to hold off preemption on a request")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527162418.24755-1-chris@chris-wilson.co.uk
(cherry picked from commit b72f02d78e)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Since we temporarily disable the heartbeat and restore back to the
default value, we can use the stored defaults on the engine and avoid
using a local.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519063123.20673-3-chris@chris-wilson.co.uk
(cherry picked from commit 3a230a554d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Alexandre Oliva has recently removed these files from Linux Libre
with concerns that the sources weren't available.
The sources are available on IGT repository, and only open source
tools are used to generate the {ivb,hsw}_clear_kernel.c files.
However, the remaining concern from Alexandre Oliva was around
GPL license and the source not been present when distributing
the code.
So, it looks like 2 alternatives are possible, the use of
linux-firmware.git repository to store the blob or making sure
that the source is also present in our tree. Since the goal
is to limit the i915 firmware to only the micro-controller blobs
let's make sure that we do include the asm sources here in our tree.
Btw, I tried to have some diligence here and make sure that the
asms that these commits are adding are truly the source for
the mentioned files:
igt$ ./scripts/generate_clear_kernel.sh -g ivb \
-m ~/mesa/build/src/intel/tools/i965_asm
Output file not specified - using default file "ivb-cb_assembled"
Generating gen7 CB Kernel assembled file "ivb_clear_kernel.c"
for i915 driver...
igt$ diff ~/i915/drm-tip/drivers/gpu/drm/i915/gt/ivb_clear_kernel.c \
ivb_clear_kernel.c
< * Generated by: IGT Gpu Tools on Fri 21 Feb 2020 05:29:32 AM UTC
> * Generated by: IGT Gpu Tools on Mon 08 Jun 2020 10:00:54 AM PDT
61c61
< };
> };
\ No newline at end of file
igt$ ./scripts/generate_clear_kernel.sh -g hsw \
-m ~/mesa/build/src/intel/tools/i965_asm
Output file not specified - using default file "hsw-cb_assembled"
Generating gen7.5 CB Kernel assembled file "hsw_clear_kernel.c"
for i915 driver...
igt$ diff ~/i915/drm-tip/drivers/gpu/drm/i915/gt/hsw_clear_kernel.c \
hsw_clear_kernel.c
5c5
< * Generated by: IGT Gpu Tools on Fri 21 Feb 2020 05:30:13 AM UTC
> * Generated by: IGT Gpu Tools on Mon 08 Jun 2020 10:01:42 AM PDT
61c61
< };
> };
\ No newline at end of file
Used IGT and Mesa master repositories from Fri Jun 5 2020)
IGT: 53e8c878a6fb ("tests/kms_chamelium: Force reprobe after replugging
the connector")
Mesa: 5d13c7477eb1 ("radv: set keep_statistic_info with
RADV_DEBUG=shaderstats")
Mesa built with: meson build -D platforms=drm,x11 -D dri-drivers=i965 \
-D gallium-drivers=iris -D prefix=/usr \
-D libdir=/usr/lib64/ -Dtools=intel \
-Dkulkan-drivers=intel && ninja -C build
v2: Header clean-up and include build instructions in a readme (Chris)
Modified commit message to respect check-patch
Reference: http://www.fsfla.org/pipermail/linux-libre/2020-June/003374.html
Reference: http://www.fsfla.org/pipermail/linux-libre/2020-June/003375.html
Fixes: 47f8253d2b ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Cc: <stable@vger.kernel.org> # v5.7+
Cc: Alexandre Oliva <lxoliva@fsfla.org>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200610201807.191440-1-rodrigo.vivi@intel.com
Just in case everything fails (like for example "missed interrupt
syndrome" on Sandybridge), always flush the submission tasklet from the
heartbeat. This papers over such issues, but will still appear as a
second long glitch, and prevents us from detecting it unless we happen
to be performing a timed test.
v2: We rely on flush_submission() synchronizing with the tasklet on
another CPU.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200615165013.22973-3-chris@chris-wilson.co.uk
Platform drivers now have the option to have the platform core create
and remove any needed sysfs attribute files. So take advantage of that
and do not register "by hand" a sysfs file.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200517193655.3895087-2-emil.l.velikov@gmail.com
Currently the ret handling is all over the place - with two redundant
assignments and another one addressed earlier.
Use the exact same flow in both functions.
v2: straighten the code flow, instead of just removing the assignments
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200530124640.4176323-2-emil.l.velikov@gmail.com
The function always returns zero (success). Ideally we'll remove it all
together - although that's requires a little more work.
For now, we can drop the return type and simplify the drm core code
surrounding it.
v2: remove redundant assignment (Sam)
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200530124640.4176323-1-emil.l.velikov@gmail.com
Ingo suggested that since the new sched_set_*() functions are
implemented using the 'nocheck' variants, they really shouldn't ever
fail, so remove the return value.
Cc: axboe@kernel.dk
Cc: daniel.lezcano@linaro.org
Cc: sudeep.holla@arm.com
Cc: airlied@redhat.com
Cc: broonie@kernel.org
Cc: paulmck@kernel.org
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Because SCHED_FIFO is a broken scheduler model (see previous patches)
take away the priority field, the kernel can't possibly make an
informed decision.
In this case, use fifo_low, because it only cares about being above
SCHED_NORMAL. Effectively no change in behaviour.
Cc: alexander.deucher@amd.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Because SCHED_FIFO is a broken scheduler model (see previous patches)
take away the priority field, the kernel can't possibly make an
informed decision.
Use sched_set_fifo(); Effectively changes prio from 16 to 50.
Cc: airlied@redhat.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
gcc-9 gets confused by the code flow in check_dirty_whitelist:
drivers/gpu/drm/i915/gt/selftest_workarounds.c: In function 'check_dirty_whitelist':
drivers/gpu/drm/i915/gt/selftest_workarounds.c:492:17: error: 'rsvd' may be used uninitialized in this function [-Werror=maybe-uninitialized]
I could not figure out a good way to do this in a way that gcc
understands better, so initialize the variable to zero, as last
resort.
Fixes: aee20aaed8 ("drm/i915: Implement read-only support in whitelist selftest")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527140526.1458215-2-arnd@arndb.de
(cherry picked from commit cc649a9eaf)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Conditional spinlocks make it hard for gcc and for lockdep to
follow the code flow. This one causes a warning with at least
gcc-9 and higher:
In file included from include/linux/irq.h:14,
from drivers/gpu/drm/i915/i915_pmu.c:7:
drivers/gpu/drm/i915/i915_pmu.c: In function 'i915_sample':
include/linux/spinlock.h:289:3: error: 'flags' may be used uninitialized in this function [-Werror=maybe-uninitialized]
289 | _raw_spin_unlock_irqrestore(lock, flags); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/i915_pmu.c:288:17: note: 'flags' was declared here
288 | unsigned long flags;
| ^~~~~
Split out the part between the locks into a separate function
for readability and to let the compiler figure out what the
logic actually is.
Fixes: d79e1bd676 ("drm/i915/pmu: Only use exclusive mmio access for gen7")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527140526.1458215-1-arnd@arndb.de
(cherry picked from commit 6ec81b8273)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
It was quite the oversight to only factor in the normal queue to decide
the timeslicing switch priority. By leaving out the next virtual request
from the priority decision, we would not timeslice the current engine if
there was an available virtual request.
Testcase: igt/gem_exec_balancer/sliced
Fixes: 3df2deed41 ("drm/i915/execlists: Enable timeslice on partial virtual engine dequeue")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519132046.22443-3-chris@chris-wilson.co.uk
(cherry picked from commit 6ad249ba59)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When the current entry is rejected as candidate for the search
it does not mean that we can abort the subtree search.
It is perfectly possible that only the alignment, but not the
size is the reason for the rejection.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Link: https://patchwork.freedesktop.org/patch/369394/
ttm_bo_add_move_fence() invokes dma_fence_get(), which returns a
reference of the specified dma_fence object to "fence" with increased
refcnt.
When ttm_bo_add_move_fence() returns, local variable "fence" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
ttm_bo_add_move_fence(). When no_wait_gpu flag is equals to true, the
function forgets to decrease the refcnt increased by dma_fence_get(),
causing a refcnt leak.
Fix this issue by calling dma_fence_put() when no_wait_gpu flag is
equals to true.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/370221/
Signed-off-by: Christian König <christian.koenig@amd.com>
ttm_bo_vm_fault_reserved() invokes dma_fence_get(), which returns a
reference of the specified dma_fence object to "moving" with increased
refcnt.
When ttm_bo_vm_fault_reserved() returns, local variable "moving" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in several exception handling paths
of ttm_bo_vm_fault_reserved(). When those error scenarios occur such as
"err" equals to -EBUSY, the function forgets to decrease the refcnt
increased by dma_fence_get(), causing a refcnt leak.
Fix this issue by calling dma_fence_put() when no_wait_gpu flag is
equals to true.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/370219/
Signed-off-by: Christian König <christian.koenig@amd.com>
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
-----BEGIN PGP SIGNATURE-----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=1NIT
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
treewide: replace '---help---' in Kconfig files with 'help'
kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
samples: binderfs: really compile this sample and fix build issues
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
gen3 does not fully flush MI stores to memory on MI_FLUSH, such that a
subsequent read from e.g. the sampler can bypass the store and read the
stale value from memory. This is a serious issue when we are using MI
stores to rewrite the batches for relocation, as it means that the batch
is reading from random user/kernel memory. While it is particularly
sensitive [and detectable] for relocations, reading stale data at any
time is a worry.
Having started with a small number of delaying stores and doubling until
no more incoherency was seen over a few hours (with and without
background memory pressure), 32 was the magic number.
Note that it definitely doesn't fix the issue, merely adds a long delay
between requests, sufficient to mostly hide the problem, enough to raise
the mtbf to several hours. This is merely a stop gap.
v2: Follow more closer with the gen5 w/a and include some
post-invalidate flushes as well.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2018
References: a889580c08 ("drm/i915: Flush GPU relocs harder for gen3")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612123949.7093-1-chris@chris-wilson.co.uk
Reduce the smoke depth by trimming the number of contexts, repetitions
and wait times. This is in preparation for a less greedy scheduler that
tries to be fair across contexts, resulting in a great many more context
switches. A thousand context switches may be 50-100ms, causing us to
timeout as the HW is not fast enough to complete the deep smoketests.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200607222108.14401-5-chris@chris-wilson.co.uk
Since the process_csb() does not require us to hold the
engine->active.lock, we can move the opportunistic flush before
direction submission to outside of the lock.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612221113.9129-1-chris@chris-wilson.co.uk
This week I started seeing GPU crashes on my DragonBoard 845c
which I narrowed down to being caused by commit ccac7ce373
("drm/msm: Refactor address space initialization").
Looking through the patch, Jordan and I couldn't find anything
obviously wrong, so I ended up breaking that change up into a
number of smaller logical steps so I could figure out which part
was causing the trouble.
Ends up, visually counting 'f's is hard, esp across a number
of lines:
0xfffffff != 0xffffffff
This patch corrects the end value we pass in to
msm_gem_address_space_create() in
adreno_iommu_create_address_space() so that it matches the value
used before the problematic patch landed.
With this change, I no longer see the GPU crashes that were
affecting me.
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: freedreno@lists.freedesktop.org
Fixes: ccac7ce373 ("drm/msm: Refactor address space initialization")
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
If we find ourselves trying to reuse a misplaced but active vma, we
currently try to discard it to avoid having to wait to unbind it
(upsetting the current user fo the vma). An alternative to marking it as
a dicarded vma and keeping it in both the obj->vma.list and
obj->vma.tree, is to simply remove it from the lookup rbtree.
While it remains in the list of vma, it will be unbound under eviction
pressure and freed along with the object. We will never reuse it again
for new instances. As before, with no pruning, the list may continually
grow, but eventually we will have the most constrained version of the
ggtt view that meets all requirements -- so the list of vma should not
grow without bound.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2012
Fixes: 9bdcaa5e3a ("drm/i915: Discard a misplaced GGTT vma")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200611180421.23262-1-chris@chris-wilson.co.uk
For all ddi, encoder->type holds output type as ddi,
assigning it to individual o/p types is no more valid.
Fixes: 362bfb995b ("drm/i915/tgl: Add DKL PHY vswing table for HDMI")
v2: Rebase, no functional change.
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612082237.11886-1-vandita.kulkarni@intel.com
In the current implementation, mutex initialization
for encoder mutex locks are done during encoder
setup. This can lead to scenarios where the lock
is used before it is initialized. Move mutex_init
to dpu_encoder_init to avoid this.
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fix to return negative error code -ENOMEM with the use of
ERR_PTR from dpu_encoder_init.
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Chen Tao <chentao107@huawei.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
In function msm_submitqueue_create, the queue is a local
variable, in return -EINVAL branch, queue didn`t add to ctx`s
list yet, and also didn`t kfree, this maybe bring in potential
memleak.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
[trivial commit msg fixup]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Request for color processing blocks only if they are
available in the display hw catalog and they are
sufficient in number for the selection.
Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Fixes: e47616df00 ("drm/msm/dpu: add support for color processing
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Merge some more updates from Andrew Morton:
- various hotfixes and minor things
- hch's use_mm/unuse_mm clearnups
Subsystems affected by this patch series: mm/hugetlb, scripts, kcov,
lib, nilfs, checkpatch, lib, mm/debug, ocfs2, lib, misc.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kernel: set USER_DS in kthread_use_mm
kernel: better document the use_mm/unuse_mm API contract
kernel: move use_mm/unuse_mm to kthread.c
kernel: move use_mm/unuse_mm to kthread.c
stacktrace: cleanup inconsistent variable type
lib: test get_count_order/long in test_bitops.c
mm: add comments on pglist_data zones
ocfs2: fix spelling mistake and grammar
mm/debug_vm_pgtable: fix kernel crash by checking for THP support
lib: fix bitmap_parse() on 64-bit big endian archs
checkpatch: correct check for kernel parameters doc
nilfs2: fix null pointer dereference at nilfs_segctor_do_construct()
lib/lz4/lz4_decompress.c: document deliberate use of `&'
kcov: check kcov_softirq in kcov_remote_stop()
scripts/spelling: add a few more typos
khugepaged: selftests: fix timeout condition in wait_for_scan()
When we want to use float point operation on Linux
we need to use within special kernel protection
(`kernel_fpu_{begin,end}()`.), otherwise the kernel
can clobber userspace FPU register state. For detecting
these issues we use a tool named objtool (with -Ffa
flags) to highlight the FPU problems, all warnings can
be summed up as follows:
./tools/objtool/objtool check -Ffa
drivers/gpu/drm/amd/display/dc/dml/dml_common_defs.o
[..] dc/dsc/rc_calc.o: warning: objtool: get_qp_set()+0x2f8:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: dsc_roundf()+0x5:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: dsc_ceil()+0x5:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: get_ofs_set()+0x3eb:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: calc_rc_params()+0x3c:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/dc_dsc.o: warning: objtool:
get_dsc_bandwidth_range.isra.0()+0x8d:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/dc_dsc.o: warning: objtool: setup_dsc_config()+0x2ef:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc_dpi.o: warning: objtool:copy_pps_fields()+0xbb:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc_dpi.o: warning: objtool:
dscc_compute_dsc_parameters()+0x7b:
FPU instruction outside of kernel_fpu_{begin,end}()
This commit fixes the above issues by rework DSC as described:
1. Isolate all FPU operations in a single file;
2. Use FPU flags only in the file that handles FPU operations;
3. Isolate all functions that require float point operation in static
functions;
4. Add a mid-layer function that does not use any float point operation,
and that could be safely invoked in other parts of the code.
5. Keep float point operation under DC_FP_{START/END} macro.
CC: Christian König <christian.koenig@amd.com>
CC: Alexander Deucher <Alexander.Deucher@amd.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Tony Cheng <tony.cheng@amd.com>
CC: Harry Wentland <hwentlan@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initializes Powertune data for a specific Hawaii card by fixing what
looks like a typo in the code. The device ID 66B1 is not a supported
device ID for this driver, and is not mentioned elsewhere. 67B1 is a
valid device ID, and is a Hawaii Pro GPU.
I have tested on my R9 390 which has device ID 67B1, and it works
fine without problems.
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
core:
- fix race in connectors sending hotplug
i915:
- Avoid use after free in cmdparser
- Avoid NULL dereference when probing all display encoders
- Fixup to module parameter type
sun4i:
- clock divider fix
ast:
- 24/32 bpp mode setting fix
-----BEGIN PGP SIGNATURE-----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=IBzW
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-06-11-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"One sun4i fix and a connector hotplug race The ast fix is for a
regression in 5.6, and one of the i915 ones fixes an oops reported by
dhowells.
core:
- fix race in connectors sending hotplug
i915:
- Avoid use after free in cmdparser
- Avoid NULL dereference when probing all display encoders
- Fixup to module parameter type
sun4i:
- clock divider fix
ast:
- 24/32 bpp mode setting fix"
* tag 'drm-next-2020-06-11-1' of git://anongit.freedesktop.org/drm/drm:
drm/ast: fix missing break in switch statement for format->cpp[0] case 4
drm/sun4i: hdmi ddc clk: Fix size of m divider
drm/i915/display: Only query DP state of a DDI encoder
drm/i915/params: fix i915.reset module param type
drm/i915/gem: Mark the buffer pool as active for the cmdparser
drm/connector: notify userspace on hotplug after register complete
With the removal of the internal wait-priority boosting, we can also
remove the selftest to ensure that those waits were being suppressed
from causing preemptions.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200607222108.14401-4-chris@chris-wilson.co.uk
Atm, a pending delayed destroy work during module removal will be
canceled, leaving behind MST ports, mstbs. Fix this by using a dedicated
workqueue which will be drained of requeued items as well when
destroying it.
v2:
- Check if wq is NULL before calling destroy_workqueue().
Cc: Lyude Paul <lyude@redhat.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200610134704.25270-1-imre.deak@intel.com
During the initial MST probing an MST port's I2C device will be
registered using the kdev of the DRM device as a parent. Later after MST
Connection Status Notifications this I2C device will be re-registered
with the kdev of the port's connector. This will also move
inconsistently the I2C device's sysfs entry from the DRM device's sysfs
dir to the connector's dir.
Fix the above by keeping the DRM kdev as the parent of the I2C device.
Ideally the connector's kdev would be used as a parent, similarly to
non-MST connectors, however that needs some more refactoring to ensure
the connector's kdev is already available early enough. So keep the
existing (initial) behavior for now.
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200607212522.16935-2-imre.deak@intel.com
Some TypeC -> native DP adapters, at least the Club 3D CAC-1557 adapter,
incorrectly filter out HPD short pulses with a duration less than
~540 usec, leading to MST probe failures.
According to the DP Standard 2.0 section 5.1.4:
- DP sinks should generate short pulses in the 500 usec -> 1 msec range
- DP sources should detect short pulses in the 250 usec -> 2 msec range
According to the DP Alt Mode on TypeC Standard section 3.9.2, adapters
should detect and forward short pulses according to how sources should
detect them as specified in the DP Standard (250 usec -> 2 msec).
Based on the above filtering out short pulses with a duration less than
540 usec is incorrect.
To make such adapters work add support for a driver polling on MST
inerrupt flags, and wire this up in the i915 driver. The sink can clear
an interrupt it raised after 110 msec if the source doesn't respond, so
use a 50 msec poll period to avoid missing an interrupt. Polling of the
MST interrupt flags is explicitly allowed by the DP Standard.
This fixes MST probe failures I saw using this adapter and a DELL U2515H
monitor.
v2:
- Fix the wait event timeout for the no-poll case.
v3 (Ville):
- Fix the short pulse duration limits in the commit log prescribed by the
DP Standard.
- Add code comment explaining why/how polling is used.
- Factor out a helper to schedule the port's hpd irq handler and move it
to the rest of hotplug handlers.
- Document the new MST callback.
- s/update_hpd_irq_state/poll_hpd_irq/
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200604184500.23730-2-imre.deak@intel.com
Currently MST on a port can get enabled/disabled from the hotplug work
and get disabled from the short pulse work in a racy way. Fix this by
relying on the MST state checking in the hotplug work and just schedule
a hotplug work from the short pulse handler if some problem happened
during the MST interrupt handling.
This removes the explicit MST disabling in case of an AUX failure, but
if AUX fails, then probably the detection will also fail during the
scheduled hotplug work and it's not guaranteed that we'll see
intermittent errors anyway.
While at it also simplify the error checking of the MST interrupt
handler.
v2:
- Convert intel_dp_check_mst_status() to return bool. (Ville)
- Change the intel_dp->is_mst check to an assert, since after this patch
the condition can't change after we checked it previously.
- Document the return value from intel_dp_check_mst_status().
v3:
- Remove the intel_dp->is_mst check from intel_dp_check_mst_status().
There is no point in checking the same condition twice, even though
there is a chance that the hotplug work running concurrently changes
it.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605094801.17709-1-imre.deak@intel.com
DSC is not supported on DP MST streams so just don't add this entry for
MST connectors.
This also fixes an OOPS, caused by the encoder->digport cast, which is
not valid for MST encoders.
v2:
- Check encoder, which is unset for an MST connector, before it gets
enabled.
v3:
- Just don't add this debugfs file for MST connectors. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609184140.4937-1-imre.deak@intel.com
According to BSpec the Data Island Packet should be disabled after
disabling the transcoder, but before the transcoder clock select is set
to none. On an ICL RVP, daisy-chained MST config not following this
leads to a hang with the following MCE when disabling the output:
[ 870.948739] mce: [Hardware Error]: CPU 0: Machine Check Exception: 5 Bank 6: ba00000011000402
[ 871.019212] mce: [Hardware Error]: RIP !INEXACT! 10:<ffffffff81aca652> {poll_idle+0x92/0xb0}
[ 871.019212] mce: [Hardware Error]: TSC 135a261fe61
[ 871.019212] mce: [Hardware Error]: PROCESSOR 0:706e5 TIME 1591739604 SOCKET 0 APIC 0 microcode 20
[ 871.019212] mce: [Hardware Error]: Run the above through 'mcelog --ascii'
[ 871.019212] mce: [Hardware Error]: Machine check: Processor context corrupt
[ 871.019212] Kernel panic - not syncing: Fatal machine check
[ 871.019212] Kernel Offset: disabled
Bspec: 4287
Fixes: fa37a21327 ("drm/i915: Stop sending DP SDPs on ddi disable")
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609220616.6015-1-imre.deak@intel.com
The mgag200 driver now uses managed functions for DRM devices. The
individual helpers for modesetting and memory managed are already
covered, so only device allocation and initialization is left for
conversion.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-15-tzimmermann@suse.de
Following current best practice, the instance of struct drm_device is now
embedded in struct mga_device. The respective field has been renamed from
'dev' to 'base' to reflect the relationship. Conversion from DRM device is
done via upcast. Using dev_private is no longer possible.
The patch also open-codes drm_dev_alloc() and DRM device initialization
is now performed by a call to drm_device_init().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-14-tzimmermann@suse.de
Instances of struct drm_device and struct mga_device are now allocated
next to each other in mgag200_driver_load(). Yet another preparation
before embedding the DRM device instance in struct mga_device.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-13-tzimmermann@suse.de
Embedding the DRM device instance in struct mga_device will require
changes to device allocation. Moving the device initialization into
its own functions gets it out of the way.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-12-tzimmermann@suse.de
Moving the initializer and cleanup functions for device instances
to mgag200_drv.c prepares for the conversion to managed code. No
functional changes are made. Remove mgag200_main.c, which is now
empty.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-11-tzimmermann@suse.de
Support for HW cursors got remove by commit 5a77e2bfdd ("drm/mgag200:
Remove HW cursor") Apparently the source file was not deleted. Removed
it now.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 5a77e2bfdd ("drm/mgag200: Remove HW cursor")
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Allison Randal <allison@lohutok.net>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-3-tzimmermann@suse.de
sysfs. In drivers, sun4i now uses 4 bits to store the clock's m divider;
ast sets up 24/32-bit color mode correctly.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAl7h4c0ACgkQaA3BHVML
eiP6Pgf9GN4XlZvsrH7lV+125XwlX4gMa0/MQguNldvr6HsMJfV0rFL5cNbLrjbx
rLBD2INasf4iXeaUf4LIJPfPbjhHJlAqi3VePb9SH3+EaU23wfmY68rVcKU15z3k
/0Csu06h70U10f8US+2qGn+82ZhT4au6s6+6bOfE7C4QIbi5jkmlB5ZiTQn2H/J3
FUCYUxTEASjkYTXwYCaPdTVqITNzekd6Oun+C612oHcVQvFrPbhsCTz85v0q7RZJ
Rd2PM6WKHLQEw55GEsGaMmzEKLm+xKlT5TCkZRVvCB6X2CLIShhuWun/qA+FfKXK
+hDToj2B8BHf9b8LvPF+1tmD3BNZ2w==
=vo9M
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2020-06-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
In core, DRM connectors now notify userspace of hotplug events via
sysfs. In drivers, sun4i now uses 4 bits to store the clock's m divider;
ast sets up 24/32-bit color mode correctly.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200611075007.GA15098@linux-uq9g
Currently the switch statement for format->cpp[0] value 4 assigns
color_index which is never read again and then falls through to the
default case and returns. This looks like a missing break statement
bug. Fix this by adding a break statement.
Addresses-Coverity: ("Unused value")
Fixes: 259d14a76a ("drm/ast: Split ast_set_vbios_mode_info()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200610115804.1132338-1-colin.king@canonical.com
