Commit Graph

3112 Commits

Author SHA1 Message Date
Andrew Morton
a80a6b85b4 revert "epoll: support for disabling items, and a self-test app"
Revert commit 03a7beb55b ("epoll: support for disabling items, and a
self-test app") pending resolution of the issues identified by Michael
Kerrisk, copied below.

We'll revisit this for 3.8.

: I've taken a look at this patch as it currently stands in 3.7-rc1, and
: done a bit of testing. (By the way, the test program
: tools/testing/selftests/epoll/test_epoll.c does not compile...)
:
: There are one or two places where the behavior seems a little strange,
: so I have a question or two at the end of this mail. But other than
: that, I want to check my understanding so that the interface can be
: correctly documented.
:
: Just to go though my understanding, the problem is the following
: scenario in a multithreaded application:
:
: 1. Multiple threads are performing epoll_wait() operations,
:    and maintaining a user-space cache that contains information
:    corresponding to each file descriptor being monitored by
:    epoll_wait().
:
: 2. At some point, a thread wants to delete (EPOLL_CTL_DEL)
:    a file descriptor from the epoll interest list, and
:    delete the corresponding record from the user-space cache.
:
: 3. The problem with (2) is that some other thread may have
:    previously done an epoll_wait() that retrieved information
:    about the fd in question, and may be in the middle of using
:    information in the cache that relates to that fd. Thus,
:    there is a potential race.
:
: 4. The race can't solved purely in user space, because doing
:    so would require applying a mutex across the epoll_wait()
:    call, which would of course blow thread concurrency.
:
: Right?
:
: Your solution is the EPOLL_CTL_DISABLE operation. I want to
: confirm my understanding about how to use this flag, since
: the description that has accompanied the patches so far
: has been a bit sparse
:
: 0. In the scenario you're concerned about, deleting a file
:    descriptor means (safely) doing the following:
:    (a) Deleting the file descriptor from the epoll interest list
:        using EPOLL_CTL_DEL
:    (b) Deleting the corresponding record in the user-space cache
:
: 1. It's only meaningful to use this EPOLL_CTL_DISABLE in
:    conjunction with EPOLLONESHOT.
:
: 2. Using EPOLL_CTL_DISABLE without using EPOLLONESHOT in
:    conjunction is a logical error.
:
: 3. The correct way to code multithreaded applications using
:    EPOLL_CTL_DISABLE and EPOLLONESHOT is as follows:
:
:    a. All EPOLL_CTL_ADD and EPOLL_CTL_MOD operations should
:       should EPOLLONESHOT.
:
:    b. When a thread wants to delete a file descriptor, it
:       should do the following:
:
:       [1] Call epoll_ctl(EPOLL_CTL_DISABLE)
:       [2] If the return status from epoll_ctl(EPOLL_CTL_DISABLE)
:           was zero, then the file descriptor can be safely
:           deleted by the thread that made this call.
:       [3] If the epoll_ctl(EPOLL_CTL_DISABLE) fails with EBUSY,
:           then the descriptor is in use. In this case, the calling
:           thread should set a flag in the user-space cache to
:           indicate that the thread that is using the descriptor
:           should perform the deletion operation.
:
: Is all of the above correct?
:
: The implementation depends on checking on whether
: (events & ~EP_PRIVATE_BITS) == 0
: This replies on the fact that EPOLL_CTL_AD and EPOLL_CTL_MOD always
: set EPOLLHUP and EPOLLERR in the 'events' mask, and EPOLLONESHOT
: causes those flags (as well as all others in ~EP_PRIVATE_BITS) to be
: cleared.
:
: A corollary to the previous paragraph is that using EPOLL_CTL_DISABLE
: is only useful in conjunction with EPOLLONESHOT. However, as things
: stand, one can use EPOLL_CTL_DISABLE on a file descriptor that does
: not have EPOLLONESHOT set in 'events' This results in the following
: (slightly surprising) behavior:
:
: (a) The first call to epoll_ctl(EPOLL_CTL_DISABLE) returns 0
:     (the indicator that the file descriptor can be safely deleted).
: (b) The next call to epoll_ctl(EPOLL_CTL_DISABLE) fails with EBUSY.
:
: This doesn't seem particularly useful, and in fact is probably an
: indication that the user made a logic error: they should only be using
: epoll_ctl(EPOLL_CTL_DISABLE) on a file descriptor for which
: EPOLLONESHOT was set in 'events'. If that is correct, then would it
: not make sense to return an error to user space for this case?

Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: "Paton J. Lewis" <palewis@adobe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-09 06:41:46 +01:00
Linus Torvalds
5a5210c6ad With the v3.7-rc2 kernel, the network cards on my target boxes
were not being brought up. I found that the modules for the
 network was not being installed. This was due to the config
 CONFIG_MODULES_USE_ELF_RELA that came before CONFIG_MODULES, and
 confused ktest in thinking that CONFIG_MODULES=y was not found.
 
 Ktest needs to test all configs and not just stop if something starts
 with CONFIG_MODULES.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJQig8hAAoJEOdOSU1xswtMkFgIALLcnba79RHsPdGCTX247Hcg
 UdteytZgyd1XayDSPLOVAR5f1vJeZ/6/L5dwWqZpf+j6wUTBwdUTc4DlBwHNpi8V
 XDKbwAYWAQp4BVaQkKcrxKZZepE791NWxCelG7T7S0d7jIkwFTA4BhT4+8+QFztZ
 H5IDL+HA73Jvehfv3gpJW6yDQ/QSyUjIK4QCsJS+wodB9nDzhAEiZ6ZKflSXFGq4
 J+Fl/UfRfnA+j0aP75ecL7hewfdiLOmK67vKvW3l8wZ7s0y3NnIsxymmaa6sTIAQ
 lIAsmSPdqOzXExIKLBHnsHCog6UW4a91MmEqM05IDpt+AcCnwDbk4EfbJEXa8ug=
 =vl1t
 -----END PGP SIGNATURE-----

Merge tag 'ktest-v3.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

Pull ktest confusion fix from Steven Rostedt:
 "With the v3.7-rc2 kernel, the network cards on my target boxes were
  not being brought up.

  I found that the modules for the network was not being installed.
  This was due to the config CONFIG_MODULES_USE_ELF_RELA that came
  before CONFIG_MODULES, and confused ktest in thinking that
  CONFIG_MODULES=y was not found.

  Ktest needs to test all configs and not just stop if something starts
  with CONFIG_MODULES."

* tag 'ktest-v3.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Fix ktest confusion with CONFIG_MODULES_USE_ELF_RELA
2012-10-28 11:14:52 -07:00
Linus Torvalds
6a2e52f844 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "Most of the kernel diffstat relates to a group of Intel P6 and KNC
  (Xeon-Phi Knights Corner) PMU driver fixes, neither of which is in
  heavy use, so we took the fixes.

  The rest is diverse smallish fixes to the tooling and kernel side."

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Remove unused variable in nhmex_rbox_alter_er()
  perf/x86: Enable overflow on Intel KNC with a custom knc_pmu_handle_irq()
  perf/x86: Remove cpuc->enable check on Intl KNC event enable/disable
  perf/x86: Make Intel KNC use full 40-bit width of counters
  perf/x86/uncore: Handle pci_read_config_dword() errors
  perf/x86: Remove P6 cpuc->enabled check
  perf/x86: Update/fix generic events on P6 PMU
  perf/x86: Fix P6 FP_ASSIST event constraint
  perf, cpu hotplug: Use cached value of smp_processor_id()
  perf, cpu hotplug: Run CPU_STARTING notifiers with irqs disabled
  x86/perf: Fix virtualization sanity check
  perf test: Fix exclude_guest parse events tests
  perf tools: do not flush maps on COMM for perf report
  perf help: Fix --help for builtins
  perf trace: Check if sample raw_data field is set
  perf trace: Validate syscall id before growing syscall table
2012-10-26 09:35:00 -07:00
Steven Rostedt
8bc5e4ea3e ktest: Fix ktest confusion with CONFIG_MODULES_USE_ELF_RELA
In order to decide if ktest should bother installing modules on the
target box, it checks if the config file has CONFIG_MODULES=y. But it
also checks if the '=y' part exists. It only will install modules if the
config exists and is set with '=y'. But as the regex that was used
tests:

  /^CONFIG_MODULES(=y)?/

this will also match:

  CONFIG_MODULES_USE_ELF_RELA

as the '=y' part was optional and it did not test the rest of the line.
When this happens, ktest will stop checking the rest of the configs but
it will also think that no modules are needed to be installed. What it
should do is only jump out of the loop if it actually found a
CONFIG_MODULES that is set to true.

Otherwise, ktest wont install the necessary modules needed for proper
booting of the test target.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-10-26 00:10:32 -04:00
Daniel Hazelton
fc314d0a4a tools/testing/selftests/epoll/test_epoll.c: fix build
Latest Linus head run of "make selftests" in the tools directory failed
with references to undefined variables.  Reference was to
'write_thread_data' which is the name of a struct that is being used, not
the variable itself.  Change reference so it points to the variable.

Signed-off-by: Daniel Hazelton <dshadowwolf@gmail.com>
Cc: "Paton J. Lewis" <palewis@adobe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-25 14:37:53 -07:00
David Howells
59ce8764bd UAPI: fix tools/vm/page-types.c
Fix tools/vm/page-types.c to use the UAPI variant of linux/kernel-page-flags.h
lest the following error appear:

  In file included from page-types.c:38:0:
    ../../include/linux/kernel-page-flags.h:4:42: fatal error:
    uapi/linux/kernel-page-flags.h: No such file or directory

Reported-by: Daniel Hazelton <dshadowwolf@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Fengguang Wu <fengguang.wu@intel.com>
Tested-by: Daniel Hazelton <dshadowwolf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-25 14:37:53 -07:00
Jiri Olsa
42be73989c perf test: Fix exclude_guest parse events tests
Event parsing tests are broken by following commit:

  perf tool: Precise mode requires exclude_guest
  commit 1342798cc1
  Author: David Ahern <dsahern@gmail.com>
  Date:   Thu Sep 13 14:59:13 2012 -0600

which enables 'exclude_guest' modifier any time the 'precise'
modifier is detected.

Fixing related tests and adding special comment.

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: David Ahern <dsahern@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-22 14:02:01 -02:00
Luigi Semenzato
9fdbf671ba perf tools: do not flush maps on COMM for perf report
This fixes a long-standing bug caused by the lack of separate COMM and EXEC
record types, which makes "perf report" lose track of symbols when a process
renames itself.

With this fix (suggested by Stephane Eranian), a COMM (rename) no longer
flushes the maps, which is the correct behavior.  An EXEC also no longer
flushes the maps, but this doesn't matter because as new mappings are created
(for the executable and the libraries) the old mappings are automatically
removed.  This is not by accident: the functionality is necessary because DLLs
can be explicitly loaded at any time with dlopen(), possibly on top of existing
text, so "perf report" handles correctly the clobbering of new mappings on top
of old ones.

An alternative patch (which I proposed earlier) would be to introduce a
separate PERF_RECORD_EXEC type, but it is a much larger change (about 300
lines) and is not necessary.

Signed-off-by: Luigi Semenzato <semenzato@chromium.org>
Tested-by: Stephane Eranian <eranian@google.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Olof Johansson <olofj@chromium.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Wilson <wilsons@start.ca>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Link: http://lkml.kernel.org/r/1345585940-6497-1-git-send-email-semenzato@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-22 13:55:53 -02:00
Namhyung Kim
670ab5d21c perf help: Fix --help for builtins
It seems that commit cc58482133 ("perf help: Remove use of die and
handle errors") caused the problem - it changed the initial value of
'help_format' from HELP_FORMAT_MAN to HELP_FORMAT_NONE.

This broke the --help option for all builtins, that would produce no
output, while 'man perf-top' would work it MANPATH is properly setup.

Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: David Ahern <dsahern@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/87r4orj7zc.fsf@sejong.aot.lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-22 12:35:49 -02:00
Arnaldo Carvalho de Melo
fc551f8d44 perf trace: Check if sample raw_data field is set
Sometimes we're segfaulting because we were expecting that the
perf_sample.raw_data field was set as requested, but in some cases
that needs further investigation, that field can be NULL, leading
to segfaults.

Make the tool more robust by checking that before calling any per event
handlers that may try to use that field.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-g1fmodl6ys4lq8honbj1igoi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-21 23:07:36 -02:00
Arnaldo Carvalho de Melo
3a531260a1 perf trace: Validate syscall id before growing syscall table
In some cases the ID for a syscall read thru the raw_syscalls tracepoint
is bogus, still needs to be investigated why, but to make the tool more
robust first try to resolve the ID to a name via libaudit and if it
fails, don't grow the table.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0lsokw3xor7c4ijo45u6bauh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-21 23:07:36 -02:00
Arnaldo Carvalho de Melo
45bff41a9a perf python: Properly link with libtraceevent
Namhyung Kim reported that the build fails with:

  GEN python/perf.so
  gcc: error: python_ext_build/tmp//../../libtraceevent.a: No such file or directory
  error: command 'gcc' failed with exit status 1
  cp: cannot stat `python_ext_build/lib/perf.so': No such file or directory
  make: *** [python/perf.so] Error 1

We need to propagate the TE_PATH variable to the setup.py file.

Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/n/tip-8umiPbm4sxpknKivbjgykhut@git.kernel.org
[ Fixed superfluous variable build error. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-20 02:43:08 +02:00
Ingo Molnar
a448a0318a perf/urgent fixes:
. The python binding needs to link with libtraceevent and to initialize
   the 'page_size' variable so that mmaping works again.
 
 . The callchain folding character that appears on the TUI just before
   the overhead had disappeared due to recent changes, add it back.
 
 . Intel PEBS in VT-x context uses the DS address as a guest linear address,
   even though its programmed by the host as a host linear address. This either
   results in guest memory corruption and or the hardware faulting and 'crashing'
   the virtual machine.  Therefore we have to disable PEBS on VT-x enter and
   re-enable on VT-x exit, enforcing a strict exclude_guest.
 
   Kernel side enforcement fix by Peter Zijlstra, tooling side fix by David Ahern.
 
 . Fix build on sparc due to UAPI, fix from David Miller.
 
 . Fixes for the srclike sort key for unresolved symbols and when processing
   samples in JITted code, where we don't have an ELF file, just an special
   symbol table, fixes from Namhyung Kim.
 
 . Fix some leaks in libtraceevent, from Steven Rostedt.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJQfuZQAAoJENZQFvNTUqpAqCAQALDAEmfIfj3MHjlYuf4eO54J
 sxlyv1U1l0oi6IXE2nqEUJCmh0qtpUT386WkVynqLd4EzklQ2/RP7y1tezqDTx0b
 o7qoT1CjB064x2TrHqqDbS96kYOyjLoZaIyfNPqSHUQlyq1jeA6gDzmTNqrE6ckO
 vqW7RbwFoXRHH8YTBfalxY0KQdJd/bBvLS6tKBssiROw2wZ4B3OWRbwqPEPLgu7B
 8OrX+cm02/LYvAP63VmlDlAEyIwYSN3KQUG+fAAtjNg2spMYV7ntHHH1GOvzuO5D
 wEmsY7KrMcWUW/qxhYow0ka1cSTK8QckiS6usDBocAVioPBl2YhnFqPgSzPzqF2M
 1iqfdsGwhytLZqrVzD+9MfoHVZaBVPvwtI/iCgdPFIK2RuiBJW36SECeu5jMKynV
 Teq65Nhkr9A58+5L88pz+Ws89x/TQVINYxWGLeVsN7IVEmg+o90SK6U64+EXRUZ1
 hNZ1/4BPw5i/KBDT8jX3qDZradZfA/hZiCyYAfPCk/4AUfak69wRmMDmOcQEo7JP
 m0mSi850s//ofygf+6Bu1R/usXpJEG9LFuFsIplp+rzHuM2qeHP0ch01Mj/weHjp
 7zD1xVpuRxu35o3q+9k9YKp37G+zsyiPmL4zrk0mgmYydempHY1Z6G6ZsboQYCmF
 oN0iMavg0klkd0gjEXGH
 =DTM3
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

* The python binding needs to link with libtraceevent and to initialize
  the 'page_size' variable so that mmaping works again.

* The callchain folding character that appears on the TUI just before
  the overhead had disappeared due to recent changes, add it back.

* Intel PEBS in VT-x context uses the DS address as a guest linear address,
  even though its programmed by the host as a host linear address. This either
  results in guest memory corruption and or the hardware faulting and 'crashing'
  the virtual machine.  Therefore we have to disable PEBS on VT-x enter and
  re-enable on VT-x exit, enforcing a strict exclude_guest.

  Kernel side enforcement fix by Peter Zijlstra, tooling side fix by David Ahern.

* Fix build on sparc due to UAPI, fix from David Miller.

* Fixes for the srclike sort key for unresolved symbols and when processing
  samples in JITted code, where we don't have an ELF file, just an special
  symbol table, fixes from Namhyung Kim.

* Fix some leaks in libtraceevent, from Steven Rostedt.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-20 02:40:26 +02:00
Arnaldo Carvalho de Melo
88a21d2f07 perf hists browser: Add back callchain folding symbol
The commit 5395a04841 ("perf hists: Separate overhead and baseline
columns") makes the "Overhead" column no more the first one, this
caused the test that checks if it is time to show if a histogram
entry has callchains never hits.

Fix it by checking if the 'i' variable is equal to PERF_HPP__OVERHEAD
instead of 0.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-w3lcbx0fx1fnh3l2cbq40q2e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-17 13:54:08 -03:00
David Miller
7762608184 perf tools: Fix build on sparc.
More UAPI stuff.

Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20121017.010656.383828471689899431.davem@davemloft.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-17 11:45:58 -03:00
Arnaldo Carvalho de Melo
f8de2885eb perf python: Link with libtraceevent
The evsel methods to read tracepoint fields uses libtraceevent
functions, becoming needed by the python binding as well.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-j3o4v7jyvp9ke9n230l96a1m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-17 11:45:46 -03:00
Arnaldo Carvalho de Melo
356712f6e2 perf python: Initialize 'page_size' variable
The commit 0c1fe6b:

 'perf tools: Have the page size value available for all tools'

Broke the python binding because the global variable 'page_size' is
initialized on the main() routine, that is not called when using
just the python binding, causing evlist.mmap() to fail because it
expects that variable to be initialized to the system's page size.

Fix it by initializing it on the binding init routine.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vrvp3azmbfzexnpmkhmvtzzc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-17 11:45:38 -03:00
Steven Rostedt
743df75ff1 tools lib traceevent: Fix missed freeing of subargs in free_arg() in filter
Some of args were missed in free_args(), as well as subargs.

That is args like FILTER_ARG_NUM have left and right pointers to other
args that also need to be freed.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1349137408.22822.135.camel@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-16 13:07:05 -03:00
Steven Rostedt
101782ea2c lib tools traceevent: Add back pevent assignment in __pevent_parse_format()
Even though with the change of commit commit 2b29175 "tools lib
traceevent: Carve out events format parsing routine", allowed
__pevent_parse_format() to parse an event without the need of a pevent
handler, the event still needs to assign the pevent handed to it.

There's no problem with assigning it if the pevent is NULL, as the
event->pevent would be NULL without the assignment. But function parsing
handlers may be assigned to the pevent handler to help in parsing the
event. If there's no pevent then there would not be any function
handlers, but if the pevent isn't assigned first before parsing the
event, it wont honor the function handlers that were assigned.

Worse yet, the current code crashes if an event has a function that it
tries to parse. For example:

 # perf record -e scsi:scsi_dispatch_cmd_timeout
 Segmentation fault (core dumped)

This happens because the scsi_dispatch_cmd_timeout event format has the following:

  scsi_trace_parse_cdb(p, __get_dynamic_array(cmnd), REC->cmd_len)

which hasn't been defined by the pevent code.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1349136831.22822.133.camel@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-16 13:06:36 -03:00
Namhyung Kim
63a1a3d820 perf hists browser: Fix off-by-two bug on the first column
The commit 5395a04841 ("perf hists: Separate overhead and baseline
columns") makes the "Overhead" column no more the first one.  So it
resulted in the mis-aligned column in the normal (non-diff) output.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/None
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-16 13:06:05 -03:00
Namhyung Kim
88481b6b33 perf tools: Remove warnings on JIT samples for srcline sort key
When using the srcline sort key with perf report, I see many lines of
warning related to JIT samples like below:

  addr2line: '/tmp/perf-1397.map': No such file

Since it's not a ELF binary and doesn't provide such information, just
use the raw ip address.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Irina Tirdea <irina.tirdea@intel.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1350272383-7016-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-16 13:05:38 -03:00
Namhyung Kim
ffe10c6f95 perf tools: Fix segfault when using srcline sort key
The srcline sort key is for grouping samples based on their source file
and line number.  It use addr2line tool to get the information but it
requires dso name.  It caused a segfault when a sample does not have the
name by dereferencing a NULL pointer.  Fix it by using raw ip addresses
for those samples.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1350272383-7016-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-16 13:05:07 -03:00
David Ahern
1342798cc1 perf tool: Precise mode requires exclude_guest
Summary of events per Peter:

  "Intel PEBS in VT-x context uses the DS address as a guest linear address,
  even though its programmed by the host as a host linear address. This
  either results in guest memory corruption and or the hardware faulting and
  'crashing' the virtual machine.  Therefore we have to disable PEBS on VT-x
  enter and re-enable on VT-x exit, enforcing a strict exclude_guest.

  AMB IBS does work but doesn't currently support exclude_* at all,
  setting an exclude_* bit will make it fail."

This patch handles userspace perf command, setting the exclude_guest
attribute if precise mode is requested, but only if a user has not
specified a request for guest or host only profiling (G or H attribute).

Kernel side AMD currently ignores all exclude_* bits, so there is no impact
to existing IBS code paths. Robert Richter has a patch where IBS code will
return EINVAL if an exclude_* bit is set. When this goes in it means use
of :p on AMD with IBS will first fail with EINVAL (because exclude_guest
will be set). Then the existing fallback code within perf will unset
exclude_guest and try again. The second attempt will succeed if the CPU
supports IBS profiling.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Robert Richter <robert.richter@amd.com>
Tested-by: Robert Richter <robert.richter@amd.com>
Reviewed-by: Robert Richter <robert.richter@amd.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Link: http://lkml.kernel.org/r/1347569955-54626-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-16 12:43:31 -03:00
Ingo Molnar
7d380c8f1e perf: Fix UAPI fallout
The UAPI commits forgot to test tooling builds such as tools/perf/,
and this fixes the fallout.

Manual conversion.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-14 12:22:52 -07:00
David Howells
607ca46e97 UAPI: (Scripted) Disintegrate include/linux
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
2012-10-13 10:46:48 +01:00
Linus Torvalds
a3920a6efa Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull ACPI & Thermal updates from Len Brown:
 "The generic Linux thermal layer is gaining some new capabilities
  (generic cooling via cpufreq) and some new customers (ARM).

  Also, an ACPI EC bug fix plus a regression fix."

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (30 commits)
  tools/power/acpi/acpidump: remove duplicated include from acpidump.c
  ACPI idle, CPU hotplug: Fix NULL pointer dereference during hotplug
  cpuidle / ACPI: fix potential NULL pointer dereference
  ACPI: EC: Add a quirk for CLEVO M720T/M730T laptop
  ACPI: EC: Make the GPE storm threshold a module parameter
  thermal: Exynos: Fix NULL pointer dereference in exynos_unregister_thermal()
  Thermal: Fix bug on cpu_cooling, cooling device's id conflict problem.
  thermal: exynos: Use devm_* functions
  ARM: exynos: add thermal sensor driver platform data support
  thermal: exynos: register the tmu sensor with the kernel thermal layer
  thermal: exynos5: add exynos5250 thermal sensor driver support
  hwmon: exynos4: move thermal sensor driver to driver/thermal directory
  thermal: add generic cpufreq cooling implementation
  Fix a build error.
  thermal: Fix potential NULL pointer accesses
  thermal: add Renesas R-Car thermal sensor support
  thermal: fix potential out-of-bounds memory access
  Thermal: Introduce locking for cdev.thermal_instances list.
  Thermal: Unify the code for both active and passive cooling
  Thermal: Introduce simple arbitrator for setting device cooling state
  ...
2012-10-13 11:27:59 +09:00
Linus Torvalds
ade0899b29 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "This tree includes some late late perf items that missed the first
  round:

  tools:

   - Bash auto completion improvements, now we can auto complete the
     tools long options, tracepoint event names, etc, from Namhyung Kim.

   - Look up thread using tid instead of pid in 'perf sched'.

   - Move global variables into a perf_kvm struct, from David Ahern.

   - Hists refactorings, preparatory for improved 'diff' command, from
     Jiri Olsa.

   - Hists refactorings, preparatory for event group viewieng work, from
     Namhyung Kim.

   - Remove double negation on optional feature macro definitions, from
     Namhyung Kim.

   - Remove several cases of needless global variables, on most
     builtins.

   - misc fixes

  kernel:

   - sysfs support for IBS on AMD CPUs, from Robert Richter.

   - Support for an upcoming Intel CPU, the Xeon-Phi / Knights Corner
     HPC blade PMU, from Vince Weaver.

   - misc fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  perf: Fix perf_cgroup_switch for sw-events
  perf: Clarify perf_cpu_context::active_pmu usage by renaming it to ::unique_pmu
  perf/AMD/IBS: Add sysfs support
  perf hists: Add more helpers for hist entry stat
  perf hists: Move he->stat.nr_events initialization to a template
  perf hists: Introduce struct he_stat
  perf diff: Removing the total_period argument from output code
  perf tool: Add hpp interface to enable/disable hpp column
  perf tools: Removing hists pair argument from output path
  perf hists: Separate overhead and baseline columns
  perf diff: Refactor diff displacement possition info
  perf hists: Add struct hists pointer to struct hist_entry
  perf tools: Complete tracepoint event names
  perf/x86: Add support for Intel Xeon-Phi Knights Corner PMU
  perf evlist: Remove some unused methods
  perf evlist: Introduce add_newtp method
  perf kvm: Move global variables into a perf_kvm struct
  perf tools: Convert to BACKTRACE_SUPPORT
  perf tools: Long option completion support for each subcommands
  perf tools: Complete long option names of perf command
  ...
2012-10-13 10:20:11 +09:00
Markus Trippelsdorf
871a0596cb perf: Handle new rbtree implementation
Perf build fails with the new rbtree implementation:

  ../../lib/rbtree.c:24:36: fatal error: linux/rbtree_augmented.h: No such file or directory compilation terminated.

Fix by updating the Makefile and adding a btree_augmented.h
wrapper.

Reported-and-tested-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Borislav Petkov <bp@amd64.org>
Link: http://lkml.kernel.org/r/20121009180156.GA245@x4
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-13 10:12:09 +09:00
Linus Torvalds
35e9a274fd Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig changes from Michal Marek:
 "kconfig in v3.7 is going to
   - initialize ncurses only once in menuconfig
   - be able to jump to a search result in menuconfig
   - change the misnomer oldnoconfig to a more meaningful name
     olddefconfig, keeping the old name as alias"

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: replace 'oldnoconfig' with 'olddefconfig', and keep the old name as an alias
  menuconfig: Assign jump keys per-page instead of globally
  menuconfig: Do not open code textbox scroll up/down
  menuconfig: Add jump keys to search results
  menuconfig: Extend dialog_textbox so that it can return to a scrolled position
  menuconfig: Extend dialog_textbox so that it can exit on arbitrary keypresses
  menuconfig: Remove superfluous conditionnal
  kconfig: document oldnoconfig to what it really does in conf.c
  kconfig/mconf.c: revision of curses initialization.
2012-10-12 10:28:52 +09:00
Michel Lespinasse
ec073619cd perf: fix duplicate header inclusion
#include <stdbool.h> somehow got duplicated on its way to linus's tree
(probably as a conflict resolution as things got sent through multiple
trees)

Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-11 08:50:17 +09:00
Michel Lespinasse
d6ff127392 rbtree: adjust node color in __rb_erase_color() only when necessary
In __rb_erase_color(), we were always setting a node to black after
exiting the main loop.  And in one case, after fixing up the tree to
satisfy all rbtree invariants, we were setting the current node to root
just to guarantee a loop exit, at which point the root would be set to
black.  However this is not necessary, as the root of an rbtree is already
known to be black.  The only case where the color flip is required is when
we exit the loop due to the current node being red, and it's easiest to
just do the flip at that point instead of doing it after the loop.

[adrian.hunter@intel.com: perf tools: fix build for another rbtree.c change]
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Santos <daniel.santos@pobox.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:34 +09:00
Wei Yongjun
4084a9b99c tools/power/acpi/acpidump: remove duplicated include from acpidump.c
Remove duplicated include.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-10-09 00:53:23 -04:00
Linus Torvalds
d43b7167d4 Merge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild fixes from Michal Marek:
 "Here are two fixes I intended to send after v3.6-rc7, but failed to do
  so.  So please pull them for v3.7-rc1 and they will be picked up by
  stable.

  The first one fixes gcc -x <language> syntax in various build-time
  tests, which icecream and possible other gcc wrappers did not
  understand (and yes, icecream is going to be fixed as well).

  The second one fixes make tar-pkg so that unpacking the tarball does
  not replace the /lib -> /usr/lib symlink on recent Fedora releases."

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Fix gcc -x syntax
  kbuild: Do not package /boot and /lib in make tar-pkg
2012-10-08 07:56:10 +09:00
Linus Torvalds
d8dc91b753 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pul ACPI & Power Management updates from Len Brown:
 - acpidump utility added
 - intel_idle driver now supports IVB Xeon
 - turbostat utility can now count SMIs
 - ACPI can now bind to USB3 hubs
 - misc fixes

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (49 commits)
  ACPI: Add new sysfs interface to export device description
  ACPI: Harden acpi_table_parse_entries() against BIOS bug
  tools/power/turbostat: add option to count SMIs, re-name some options
  tools/power turbostat: add [-d MSR#][-D MSR#] options to print counter deltas
  intel_idle: enable IVB Xeon support
  tools/power turbostat: add [-m MSR#] option
  tools/power turbostat: make -M output pretty
  tools/power turbostat: print more turbo-limit information
  tools/power turbostat: delete unused line
  tools/power turbostat: run on IVB Xeon
  tools/power/acpi/acpidump: create acpidump(8), local make install targets
  tools/power/acpi/acpidump: version 20101221 - find dynamic tables in sysfs
  ACPI: run _OSC after ACPI_FULL_INITIALIZATION
  tools/power/acpi/acpidump: create acpidump(8), local make install targets
  tools/power/acpi/acpidump: version 20101221 - find dynamic tables in sysfs
  tools/power/acpi/acpidump: version 20071116
  tools/power/acpi/acpidump: version 20070714
  tools/power/acpi/acpidump: version 20060606
  tools/power/acpi/acpidump: version 20051111
  xo15-ebook: convert to module_acpi_driver()
  ...
2012-10-08 07:14:06 +09:00
Linus Torvalds
dc92b1f9ab Merge branch 'virtio-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull virtio changes from Rusty Russell:
 "New workflow: same git trees pulled by linux-next get sent straight to
  Linus.  Git is awkward at shuffling patches compared with quilt or mq,
  but that doesn't happen often once things get into my -next branch."

* 'virtio-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (24 commits)
  lguest: fix occasional crash in example launcher.
  virtio-blk: Disable callback in virtblk_done()
  virtio_mmio: Don't attempt to create empty virtqueues
  virtio_mmio: fix off by one error allocating queue
  drivers/virtio/virtio_pci.c: fix error return code
  virtio: don't crash when device is buggy
  virtio: remove CONFIG_VIRTIO_RING
  virtio: add help to CONFIG_VIRTIO option.
  virtio: support reserved vqs
  virtio: introduce an API to set affinity for a virtqueue
  virtio-ring: move queue_index to vring_virtqueue
  virtio_balloon: not EXPERIMENTAL any more.
  virtio-balloon: dependency fix
  virtio-blk: fix NULL checking in virtblk_alloc_req()
  virtio-blk: Add REQ_FLUSH and REQ_FUA support to bio path
  virtio-blk: Add bio-based IO path for virtio-blk
  virtio: console: fix error handling in init() function
  tools: Fix pthread flag for Makefile of trace-agent used by virtio-trace
  tools: Add guest trace agent as a user tool
  virtio/console: Allocate scatterlist according to the current pipe size
  ...
2012-10-07 21:04:56 +09:00
Len Brown
3f44ea0d1c Merge branches 'acpica', 'acpidump', 'intel-idle', 'misc', 'module_acpi_driver-simplify', 'turbostat' and 'usb3' into release
add acpidump utility
intel_idle driver now supports IVB Xeon
turbostat can now count SMIs
ACPI can now bind to USB3 hubs
misc fixes
2012-10-06 16:00:32 -04:00
Len Brown
f9240813e6 tools/power/turbostat: add option to count SMIs, re-name some options
Counting SMIs is popular, so add a dedicated "-s" option to do it,
and juggle some of the other option letters.

-S is now system summary (was -s)
-c is 32 bit counter (was -d)
-C is 64-bit counter (was -D)
-p is 1st thread in core (was -c)
-P is 1st thread in package (was -p)

bump the minor version number

Signed-off-by: Len Brown <len.brown@intel.com>
2012-10-06 15:26:31 -04:00
Paton J. Lewis
03a7beb55b epoll: support for disabling items, and a self-test app
Enhanced epoll_ctl to support EPOLL_CTL_DISABLE, which disables an epoll
item.  If epoll_ctl doesn't return -EBUSY in this case, it is then safe to
delete the epoll item in a multi-threaded environment.  Also added a new
test_epoll self- test app to both demonstrate the need for this feature
and test it.

Signed-off-by: Paton J. Lewis <palewis@adobe.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Paul Holland <pholland@adobe.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:00 +09:00
Ingo Molnar
c942ee2e62 perf/core improvements and fixes
. Remove several cases of needless global variables, on most builtins.
 
 . Look up thread using tid instead of pid in 'perf sched'.
 
 . Move global variables into a perf_kvm struct, from David Ahern.
 
 . Hists refactorings, preparatory for improved 'diff' command, from Jiri Olsa.
 
 . Hists refactorings, preparatory for event group viewieng work, from Namhyung Kim.
 
 . Remove double negation on optional feature macro definitions, from Namhyung Kim.
 
 . Bash auto completion improvements, now we can auto complete the tools long
   options, tracepoint event names, etc, from Namhyung Kim.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJQbb7ZAAoJENZQFvNTUqpAaQoP/Ah1x/1OANf72mfM+kmk1TsS
 9b/nMTbziOIpZF3YX2rpBfh5olxzqSER78Gzhlh1hL5JD1TKXeuViwH/bhsmkGvi
 ZqZIa5ByoTF7bRlIvMfLGHyPyVgDssmbFFunQlKiQ+xUxAfJiXrdPZ7nyIU6+zHT
 X+gysLE10581O6YasRbb1upZMRtobJw7VTZafEfakSWCpke8zQJyRdAV3/yA30Q5
 4hWTgPhc54Z0jfLxOOi974RllTnHqmFkwACWWC12dZt/zhV/ujWo7fqmYpPiRwjN
 2a/EzgivnvQLAY83EGLenkCXE/Jk0FNtUE+4awX/mrE9J6KUaGgWWJl5OHojtNaE
 nYuuyMqGiV6YUD24YTWYdEJAZry2EfzM6xsTZmmSIZjFkGmpB5qAsWljuH6t52c3
 VqoiaDkIcmwMpJG4f5zZ3xMRC1QGbqHGFJc39pxHQHwALQVpsIuwiTaz0EI6V1Jy
 fQkROlpA4pI57aY6cezsCMmIPsCfFQYke6zXylrmTWUdp2KL2IvtGDpo4GRI118h
 J3S+RyW5iyhtmjdsoiemJnehJ6m9pWYD1Urwn9HU1UMSpO0nIxw7oWOTsnV/Fy/6
 gaIa2CNic+/aZ/v8s0NtX8ZNuB5cQKzGwKMFrkaRUgOJDx0lU6WoVYeaaqCVwOiD
 zuzkgAAWjlBdMJFJfepH
 =emth
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

 * Remove several cases of needless global variables, on most builtins.

 * Look up thread using tid instead of pid in 'perf sched'.

 * Move global variables into a perf_kvm struct, from David Ahern.

 * Hists refactorings, preparatory for improved 'diff' command, from Jiri Olsa.

 * Hists refactorings, preparatory for event group viewieng work, from Namhyung Kim.

 * Remove double negation on optional feature macro definitions, from Namhyung Kim.

 * Bash auto completion improvements, now we can auto complete the tools long
   options, tracepoint event names, etc, from Namhyung Kim.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-05 10:04:33 +02:00
Namhyung Kim
139c081590 perf hists: Add more helpers for hist entry stat
Add and use he_stat__add_{period,stat} for calculating hist entry's
stat.  It will be used for accumulated stats later as well.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arun Sharma <asharma@fb.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1349354994-17853-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-04 13:36:18 -03:00
Namhyung Kim
c4b35351ef perf hists: Move he->stat.nr_events initialization to a template
Since it is set to 1 for a new hist entry, no need to set to separately.
Move it to a template entry.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arun Sharma <asharma@fb.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1349354994-17853-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-04 13:35:14 -03:00
Namhyung Kim
b24c28f794 perf hists: Introduce struct he_stat
The struct he_stat is for separating out statistics data of a hist
entry.  It is required for later changes.

It's just a mechanical change and should have no functional differences.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arun Sharma <asharma@fb.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1349354994-17853-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-04 13:34:22 -03:00
Jiri Olsa
b5ff71c3ba perf diff: Removing the total_period argument from output code
The total_period is available in struct hists data via the 'struct
hist_entry::hists' pointer. There's no need to carry it through the
output code path.

Removing 'struct perf_hpp::total_period' pointer, because it's no longer
needed.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1349354994-17853-7-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-04 13:31:30 -03:00
Jiri Olsa
1d77822ea6 perf tool: Add hpp interface to enable/disable hpp column
Adding perf_hpp__column_enable function to enable/disable hists column
and removing diff command specific stuff 'need_pair and
show_displacement' from hpp code.

The diff command now enables/disables columns separately according to
the user arguments. This will be helpful in future patches where more
columns are added into diff output.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1349354994-17853-6-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-04 13:30:27 -03:00
Jiri Olsa
41724e4cf6 perf tools: Removing hists pair argument from output path
The hists pointer is now part of the 'struct hist_entry'.

And since the overhead and baseline columns are split now, there's no
reason to pass it through the output path.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1349354994-17853-5-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-04 13:29:45 -03:00
Jiri Olsa
5395a04841 perf hists: Separate overhead and baseline columns
Currently the overhead and baseline columns are handled within single
function and the distinction is made by 'baseline hists' pointer passed
by 'struct perf_hpp::ptr'.

Since hists pointer is now part of each hist_entry, it's possible to
locate paired hists pointer directly from the passed struct hist_entry
pointer.

Also separating those 2 columns makes the code more obvious.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1349354994-17853-4-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-04 13:28:49 -03:00
Jiri Olsa
dd464345f3 perf diff: Refactor diff displacement possition info
Moving the position calculation into the diff command, so the position
as prepared inside struct hist_entry data and there's no need to compute
in the output display path.

Removing 'displacement' from struct perf_hpp as it is no longer needed.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1349354994-17853-3-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-04 13:27:56 -03:00
Jiri Olsa
ae359f193a perf hists: Add struct hists pointer to struct hist_entry
Adding pointer back to the parent struct hists for struct hists_entry.

This will be useful in future for any hist_entry's data computation,
that depends on total data of its parent hists.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1349354994-17853-2-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-04 13:27:00 -03:00
Namhyung Kim
ae0c1f9934 perf tools: Complete tracepoint event names
Currently tracepoint events cannot be completed because they contain a
colon (:) character.  The colon is considered as a word separator when
bash completion is done - variable COMP_WORDBREAKS contains colon - so
if a word being completed contains a colon it can be a problem.

Recent versions of bash completion provide -n switch to
_get_comp_words_by_ref and __ltrim_colon_completions functions in order
to resolve this issue.  Copy the latter in case not exists.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1349328234-16995-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-04 12:44:52 -03:00
Rusty Russell
ca16f580a5 lguest: fix occasional crash in example launcher.
We usually got away with ->next on the final entry being NULL, but it
finally bit me.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
2012-10-04 12:12:59 +09:30