* pm-devfreq:
PM / devfreq: Define the constant governor name
PM / devfreq: Remove unneeded conditional statement
PM / devfreq: Show the all available frequencies
PM / devfreq: Change return type of devfreq_set_freq_table()
PM / devfreq: Use the available min/max frequency
Revert "PM / devfreq: Add show_one macro to delete the duplicate code"
PM / devfreq: Set min/max_freq when adding the devfreq device
* pm-tools:
tools/power/cpupower: add libcpupower.so.0.0.1 to .gitignore
tools/power/cpupower: Add 64 bit library detection
MAINTAINERS: add maintainer for tools/power/cpupower
cpupower: Fix no-rounding MHz frequency output
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prior to that, the devfreq device uses the governor name when adding
the itself. In order to prevent the mistake used the wrong governor name,
this patch defines the governor name as a constant and then uses them
instead of using the string directly.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
The freq_table array of each devfreq device is always not NULL.
In result, it is unneeded to check whether profile->freq_table
is NULL or not.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
The commit a76caf55e5 ("thermal: Add devfreq cooling") allows
the devfreq device to use the cooling device. When the cooling down
are required, the devfreq_cooling.c disables the OPP entry with
the dev_pm_opp_disable(). In result, 'available_frequencies'[1]
sysfs node never came to show the all available frequencies.
[1] /sys/class/devfreq/.../available_frequencies
So, this patch uses the 'freq_table' in the 'struct devfreq_dev_profile'
in order to show the all available frequencies.
- If 'freq_table' is NULL, devfreq core initializes them by using OPP values.
- If 'freq_table' is initialized, devfreq core just uses the 'freq_table'.
And this patch adds some comment about the sort way of 'freq_table'.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
This patch changes the return type of devfreq_set_freq_table()
from 'void' to 'int' in order to check whether it fails or not.
And This patch just removes the 'devfreq' prefix and the description
of function. Because the helper functions are only used by the devfreq.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
The commit a76caf55e5 ("thermal: Add devfreq cooling") is able
to disable OPP as a cooling device. In result, both update_devfreq()
and {min|max}_freq_show() have to consider the 'opp->available'
status of each OPP.
So, this patch adds the 'scaling_{min|max}_freq' to struct devfreq
in order to indicate the available mininum and maximum frequency
by adjusting OPP interface such as dev_pm_opp_{disable|enable}().
The 'scaling_{min|max}_freq' are used for on both update_devfreq()
and {min|max}_freq_show().
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
This reverts commit 3104fa3081.
The {min|max}_freq_show() show the stored value of the struct devfreq.
But, if the drivers/thermal/devfreq_cooling.c disables the specific
frequency value, {min|max}_freq_show() have to check this situation
before showing the stored value. So, this patch revert the macro
in order to add the additional codes.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Prior to that, the min/max_freq of the devfreq device are always zero
before the user changes the min/max_freq through sysfs entries.
It might make the confusion for the min/max_freq.
This patch initializes the available min/max_freq by using the OPP
during adding the devfreq device.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
When the devfreq_add_device fails to register deivce, the memory
leak of devfreq instance happen. So, this patch fix the memory
leak issue. Before freeing the devfreq instance checks whether
devfreq instance is NULL or not because the device_unregister()
frees the devfreq instance when jumping to the 'err_init'.
It is to prevent the duplicate the kfee(devfreq).
Cc: stable@vger.kernel.org
Fixes: ac4b281176 ("PM / devfreq: fix duplicated kfree on devfreq pointer")
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
The devfreq ues the OPP library to handle the voltage and frequency
for the device basically. This patch adds the dependency on CONFIG_PM_OPP
in order to prevent either the build break or the unknow behavior.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
THe devfreq_update_stats() updates the 'struct devfreq_dev_status'
in order to get current status of devfreq device. It is only used
for the governors.
This patch moves the devfreq_update_stats() into devfreq directory.
Signed-off-by: Chanwoo Choi <cwchoi00@gmail.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: linux-pm@vger.kernel.org
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
621 176 0 797 31d drivers/devfreq/governor_userspace.o
File size After adding 'const':
text data bss dec hex filename
670 144 0 814 32e drivers/devfreq/governor_userspace.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
platform_get_irq() returns an error code, but the tegra-devfreq
driver ignores it and always returns -ENODEV. This is not correct,
and prevents -EPROBE_DEFER from being propagated properly.
Notice that platform_get_irq() no longer returns 0 on error:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af
Print and propagate the return value of platform_get_irq on failure.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
platform_get_irq() returns an error code, but the rk3399_dmc
driver ignores it and always returns -EINVAL. This is not correct,
and prevents -EPROBE_DEFER from being propagated properly.
Notice that platform_get_irq() no longer returns 0 on error:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af
Print and propagate the return value of platform_get_irq on failure.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
The ppmu_events array is accessed only in this compilation unit so it
can be made static.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
clk_prepare_enable() can fail here and we must check its return value.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
clk_prepare_enable() can fail here and we must check its return value.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
This patch moves the struct devfreq_governor from header file
to the devfreq directory because this structure is private data
and it have to be only accessed by the devfreq core.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Fix typos and add the following to the scripts/spelling.txt:
followings||following
While we are here, add a missing colon in the boilerplate in DT binding
documents. The "you SoC" in allwinner,sunxi-pinctrl.txt was fixed as
well.
I reworded "as the followings:" to "as follows:" for
drivers/usb/gadget/udc/renesas_usb3.c.
Link: http://lkml.kernel.org/r/1481573103-11329-32-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pm-devfreq:
PM / devfreq: Modify the device name as devfreq(X) for sysfs
PM / devfreq: Simplify the sysfs name of devfreq-event device
PM / devfreq: Remove unnecessary separate _remove_devfreq()
PM / devfreq: Fix wrong trans_stat of passive devfreq device
PM / devfreq: Fix available_governor sysfs
PM / devfreq: exynos-ppmu: Show the registred device for ppmu device
PM / devfreq: Fix the wrong description for userspace governor
PM / devfreq: Fix the checkpatch warnings
PM / devfreq: exynos-bus: Print the real clock rate of bus
PM / devfreq: exynos-ppmu: Use the regmap interface to handle the registers
PM / devfreq: exynos-bus: Add the detailed correlation for Exynos5433
PM / devfreq: Don't delete sysfs group twice
This patch modifies the device name as devfreq(X) for sysfs by using the 'devfreq'
prefix word instead of separate device name. On user-space aspect, user would
find the some devfreq drvier with 'devfreq(X)' pattern. So, this patch modify the
device name as following:
- /sys/class/devfreq/[non-standard device name] -> /sys/class/devfreq/devfreq(X)
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
This patch just removes '.' character from the sysfs name of devfreq-event
device as following. Usually, the subsystem uses the similiar naming style
such as {framework name}{Number}.
- old : /sys/class/devfreq-event/event.(X)
- new : /sys/class/devfreq-event/event(X)
And this patch initializes the value of 'event_no' with -1
in order to remove the unneeded operation (-1) when calling
the atomic_inc_return(&event_no).
Lastly, this patch adds the ABI document for devfreq-event class.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
The _remove_devfreq() releases the all resources of the devfreq
device. This function is only called in the devfreq_dev_release().
For that reason, the devfreq core doesn't need to leave the
_remove_devfreq() separately. This patch releases the all
resources in the devfreq_dev_release() and then removes the
_remove_devfreq().
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Until now, the trans_stat information of passive devfreq is not updated.
This patch updates the trans_stat information after setting the target
frequency of passive devfreq device.
Fixes: 996133119f ("PM / devfreq: Add new passive governor")
Cc: stable@vger.kernel.org
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
The devfreq using passive governor is not able to change the governor.
So, the user can not change the governor through 'available_governor' sysfs
entry. Also, the devfreq which don't use the passive governor is not able to
change to 'passive' governor on the fly.
Fixes: 996133119f ("PM / devfreq: Add new passive governor")
Cc: stable@vger.kernel.org
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
This patch just adds the simple log to show the PPMU device's registration
during the kernel booting.
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
This patch fixes the wrong description of governor_userspace.c
and removes the unneeded blank line.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
This patch just fixes the checkpatch warnings.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
This patch shows the real clock rate after calling clk_set_rate()
to debug it.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
This patch uses the regmap interface to read and write the registers for exynos
PPMU device instead of the legacy memory map functions.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
The 'userspace' governor adds a sysfs entry, which is removed when
the governor is changed, or the devfreq device is released. However,
when the latter occurs via device_unregister(), device_del() is
called first, which removes the sysfs entries recursively and deletes
the kobject.
This means we get an Oops when the governor calls
sysfs_remove_group() on the deleted kobject. Fix this by only doing
the call when kobj *hasn't* been kobject_del()'d.
Note that we can't just remove the call to sysfs_remove_group()
entirely - it's needed for when the governor is changed to one which
doesn't need a sysfs entry.
Signed-off-by: Chris Diamand <chris.diamand@arm.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
This patch updates dev_pm_opp_find_freq_*() routines to get a reference
to the OPPs returned by them.
Also updates the users of dev_pm_opp_find_freq_*() routines to call
dev_pm_opp_put() after they are done using the OPPs.
As it is guaranteed the that OPPs wouldn't get freed while being used,
the RCU read side locking present with the users isn't required anymore.
Drop it as well.
This patch also updates all users of devfreq_recommended_opp() which was
returning an OPP received from the OPP core.
Note that some of the OPP core routines have gained
rcu_read_{lock|unlock}() calls, as those still use RCU specific APIs
within them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> [Devfreq]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Let the OPP core provide helpers to register notifiers for any device,
instead of exposing srcu_head outside of the core.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch fixes the wrong return value. If devfreq driver requires the wrong
and non-available governor, it is fail. So, this patch returns the error
insead of -EPROBE_DEFER.
Fixes: 403e0689d2 (PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor)
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch fixes the bug of devfreq_add_device(). The devfreq device must
have the default governor. If find_devfreq_governor() returns error,
devfreq_add_device() fail to add the devfreq instance.
Fixes: 1b5c1be2c8 (PM / devfreq: map devfreq drivers to governor using name)
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The OPP structures are abused to the best here, without understanding
how the OPP core and RCU locks work.
In short, the OPP pointer saved in 'rk3399_dmcfreq' can become invalid
under your nose, as the OPP core may free it.
Fix various abuses around OPP structures and calls.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This call never had the rcu_read_lock() counterpart. Remove the unlock
part as well.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The OPP structures are abused to the best here, without understanding
how the OPP core and RCU locks work.
In short, the OPP pointer saved 'struct exynos_bus' can become invalid
under your nose, as the OPP core may free it.
Fix various abuses around OPP structures and calls.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch uses the resource-managed to add the devfreq device.
This function will make it easy to handle the devfreq device.
- struct devfreq *devm_devfreq_add_device(struct device *dev,
struct devfreq_dev_profile *profile,
const char *governor_name,
void *data);
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
The function name in the comment was incorrect.
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
The mutex is not used at all, remove it.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
The rest of the code uses ARRAY_SIZE to count the number of entries in
ppmu_events array. The NULL terminated entry makes ARRAY_SIZE return
off-by-one value.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.
Export the module alias information using the MODULE_DEVICE_TABLE() macro.
Before this patch:
$ modinfo drivers/devfreq/event/exynos-ppmu.ko | grep alias
$
After this patch:
$ modinfo drivers/devfreq/event/exynos-ppmu.ko | grep alias
alias: of:N*T*Csamsung,exynos-ppmu-v2C*
alias: of:N*T*Csamsung,exynos-ppmu-v2
alias: of:N*T*Csamsung,exynos-ppmuC*
alias: of:N*T*Csamsung,exynos-ppmu
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.
Export the module alias information using the MODULE_DEVICE_TABLE() macro.
Before this patch:
$ modinfo drivers/devfreq/event/rockchip-dfi.ko | grep alias
$
After this patch:
$ modinfo drivers/devfreq/event/rockchip-dfi.ko | grep alias
alias: of:N*T*Crockchip,rk3399-dfiC*
alias: of:N*T*Crockchip,rk3399-dfi
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.
Export the module alias information using the MODULE_DEVICE_TABLE() macro.
Before this patch:
$ modinfo drivers/devfreq/event/exynos-nocp.ko | grep alias
$
After this patch:
$ modinfo drivers/devfreq/event/exynos-nocp.ko | grep alias
alias: of:N*T*Csamsung,exynos5420-nocpC*
alias: of:N*T*Csamsung,exynos5420-nocp
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.
Export the module alias information using the MODULE_DEVICE_TABLE() macro.
Before this patch:
$ modinfo drivers/devfreq/rk3399_dmc.ko | grep alias
$
After this patch:
$ modinfo drivers/devfreq/rk3399_dmc.ko | grep alias
alias: of:N*T*Crockchip,rk3399-dmcC*
alias: of:N*T*Crockchip,rk3399-dmc
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
In case devfreq->previous_freq is still uninitialized in
devfreq_update_status(), i.e. it has value '0', the lookups in
that function fail, eventually leading to some error message:
[ 3.041292] devfreq bus_dmc: Couldn't update frequency transition information.
Just skip the statup update in this situation.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use devfreq_list_lock around list_del() to prevent list corruption.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
