Newer versions of the X570 Master come with a newer revision of the
mainboard chipset - the X570S. These boards have the same ALC1220 codec
but seem to initialize the codec with a different parameter in Coef 0x7
which causes the output audio to be very low. We therefore write a
known-good value to Coef 0x7 to fix that. As the value is the exact same
as on the other X570(non-S) boards the same quirk-function can be shared
between both generations.
This commit adds the Gigabyte X570S Aorus Master to the list of boards
using the ALC1220_FIXUP_GB_X570 quirk. This fixes both, the silent output
and the no-audio after reboot from windows problems.
This work has been tested by the folks over at the level1techs forum here:
https://forum.level1techs.com/t/has-anybody-gotten-audio-working-in-linux-on-aorus-x570-master/154072
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220129113243.93068-3-gladiac@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The %x format of sscanf() takes an unsigned int pointer, while we pass
a signed int pointer. Practically it's OK, but this may result in a
compile warning. Let's fix it.
Fixes: a235d5b8e5 ("ALSA: hda: Allow model option to specify PCI SSID alias")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220127135717.31751-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The LED class devices that are created by HD-audio codec drivers are
registered via devm_led_classdev_register() and associated with the
HD-audio codec device. Unfortunately, it turned out that the devres
release doesn't work for this case; namely, since the codec resource
release happens before the devm call chain, it triggers a NULL
dereference or a UAF for a stale set_brightness_delay callback.
For fixing the bug, this patch changes the LED class device register
and unregister in a manual manner without devres, keeping the
instances in hda_gen_spec.
Reported-by: Alexander Sergeyev <sergeev917@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220111195229.a77wrpjclqwrx4bx@localhost.localdomain
Link: https://lore.kernel.org/r/20220126145011.16728-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
regmap_register_patch can't be used to apply the probe sequence as a
patch is already registers with the regmap by
cs35l41_register_errata_patch and only a single patch can be attached to
a single regmap. The driver doesn't currently rely on a cache sync to
re-apply this probe sequence so simply switch it to a multi write.
Fixes: 7b2f3eb492 ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220117160830.709403-1-tanureal@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are several PCI ids associated with HP EliteBook 855 G8 Notebook
PC. Commit 0e68c4b11f ("ALSA: hda/realtek: fix mute/micmute LEDs for
HP 855 G8") covers 0x103c:0x8896, while this commit covers 0x103c:0x8895
which needs some additional work on top of the quirk from 0e68c4b11f.
Note that the device can boot up with working speakers and micmute LED
without this patch, but the success rate would be quite low (order of
16 working boots across 709 boots) at least for the built-in drivers
scenario. This also means that there are some timing issues during early
boot and this patch is a workaround.
With this patch applied speakers and headphones are consistenly working,
as well as mute/micmute LEDs and the internal microphone.
Signed-off-by: Alexander Sergeyev <sergeev917@gmail.com>
Link: https://lore.kernel.org/r/20220114165050.ouw2nknuspclynro@localhost.localdomain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recently added support for CS35L41 codec unconditionally selects
CONFIG_SND_SOC_CS35L41_LIB, but this can't work unless the top-level
CONFIG_SND_SOC is enabled. This patch adds the proper dependency.
Fixes: 7b2f3eb492 ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Link: https://lore.kernel.org/r/20220107092647.20258-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The speaker fixup that is used for the Yoga 7 14ITL5 also applies to
the IdeaPad Slim 9i 14ITL5. The attached patch applies the quirk to
initialise the amplifier on the IdeaPad Slim 9i as well.
This is validated to work on my laptop.
[ corrected the quirk entry position by tiwai ]
Signed-off-by: Bart Kroon <bart@tarmack.eu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/JAG24R.7NLJGWBF4G8U@tarmack.eu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent few quirk entries for Lenovo haven't been put in the right
order. Let's arrange the table again.
Fixes: ad7cc2d41b ("ALSA: hda/realtek: Quirks to enable speaker output...")
Fixes: 6dc8697622 ("ALSA: hda/realtek: Add speaker fixup for some Yoga 15ITL5 devices")
Fixes: 8f4c90427a ("ALSA: hda/realtek: Add quirk for Legion Y9000X 2020")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Legion Y9000X 2020 has a speaker, but the speaker doesn't work.
This can be fixed by applying alc285_fixup_ideapad_s740_coef
to fix the speaker's coefficients.
Besides, to support the transition between the speaker and the headphone,
alc287_fixup_legion_15imhg05_speakers needs to be run.
Signed-off-by: Baole Fang <fbl718@163.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220105140856.4855-1-fbl718@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The suspend code unconditionally sets ->hp_jack_in and ->mic_jack_in
to zero but without reporting this status change to the HDA core.
To compensate for this, always assume a status change on the
first unsol event after boot or resume.
Fixes: 424e531b47 ("ALSA: hda/cs8409: Ensure Type Detection is only run on startup when necessary")
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Link: https://lore.kernel.org/r/20211231134432.atwmuzeceqiklcoa@cae.in-ulm.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit c8b4f0865e reduced delays related to cs42l42 jack
detection. However, the change was too aggressive. As a result
internal speakers on DELL Inspirion 3501 are not detected.
Increase the delay in cs42l42_run_jack_detect() a bit.
Fixes: c8b4f0865e ("ALSA: hda/cs8409: Remove unnecessary delays")
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Link: https://lore.kernel.org/r/20211231131221.itwotyfk5qomn7n6@cae.in-ulm.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch addresses an issue where after rebooting from Windows into Linux
there would be no audio output.
It turns out that the Realtek Audio driver on Windows changes some coeffs
which are not being reset/reinitialized when rebooting the machine. As a
result, there is no audio output until these coeffs are being reset to
their initial state. This patch takes care of that by setting known-good
(initial) values to the coeffs.
We initially relied upon alc1220_fixup_clevo_p950() to fix some pins in the
connection list. However, it also sets coef 0x7 which does not need to be
touched. Furthermore, to prevent mixing device-specific quirks I introduced
a new alc1220_fixup_gb_x570() which is heavily based on
alc1220_fixup_clevo_p950() but does not set coeff 0x7 and fixes the coeffs
that are actually needed instead.
This new alc1220_fixup_gb_x570() is believed to also work for other boards,
like the Gigabyte X570 Aorus Extreme and the newer Gigabyte Aorus X570S
Master. However, as there is no way for me to test these I initially only
enable this new behaviour for the mainboard I have which is the Gigabyte
X570(non-S) Aorus Master.
I tested this patch on the 5.15 branch as well as on master and it is
working well for me.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205275
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Fixes: 0d45e86d22 ("ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Master")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220103140517.30273-2-gladiac@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HDA regression is recently reported on Tegra194 based platforms.
This happens because "hda2codec_2x" reset does not really exist
in Tegra194 and it causes probe failure. All the HDA based audio
tests fail at the moment. This underlying issue is exposed by
commit c045ceb5a1 ("reset: tegra-bpmp: Handle errors in BPMP
response") which now checks return code of BPMP command response.
Fix this issue by skipping unavailable reset on Tegra194.
Cc: stable@vger.kernel.org
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/1640260431-11613-2-git-send-email-spujar@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Clevo NJ51CU comes either with the ALC293 or the ALC256 codec, but uses
the 0x8686 subproduct id in both cases. The ALC256 codec needs a different
quirk for the headset microphone working and and edditional quirk for sound
working after suspend and resume.
When waking up from s3 suspend the Coef 0x10 is set to 0x0220 instead of
0x0020 on the ALC256 codec. Setting the value manually makes the sound
work again. This patch does this automatically.
[ minor coding style fix by tiwai ]
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Fixes: b5acfe152a ("ALSA: hda/realtek: Add some Clove SSID in the ALC293(ALC1220)")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211215191646.844644-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds a new "alc285-hp-amp-init" model that can be used to apply the ALC285
HP speaker amplifier initialization fixup to devices that are not already
known by passing "hda_model=alc285-hp-amp-init" to the
snd-sof-intel-hda-common module or "model=alc285-hp-amp-init" to the
snd-hda-intel module, depending on which is being used.
Signed-off-by: Bradley Scott <bscott@teksavvy.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211213162246.506838-1-bscott@teksavvy.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The miXart timer notification is a variable length, and if a hardware
is screwed up, we may access over the actual data size. Let's add a
sanity check and bail out if an invalid value is received.
Link: https://lore.kernel.org/r/20211207153323.27098-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mixart_timer_notify structure was larger than could be represented
by the mixart_msg_data array storage. Adjust the size to as large as
possible to fix the warning seen with -Warray-bounds builds:
sound/pci/mixart/mixart_core.c: In function 'snd_mixart_threaded_irq':
sound/pci/mixart/mixart_core.c:447:50: error: array subscript 'struct mixart_timer_notify[0]' is partly outside array bounds of 'u32[128]' {aka 'unsigned int[128]'} [-Werror=array-bounds]
447 | for(i=0; i<notify->stream_count; i++) {
| ^~
sound/pci/mixart/mixart_core.c:328:12: note: while referencing 'mixart_msg_data'
328 | static u32 mixart_msg_data[MSG_DEFAULT_SIZE / 4];
| ^~~~~~~~~~~~~~~
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211207062941.2413679-1-keescook@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This fixes the SND_PCI_QUIRK(...) of the TongFang PHxTxX1 barebone. This
fixes the issue of sound not working after s3 suspend.
When waking up from s3 suspend the Coef 0x10 is set to 0x0220 instead of
0x0020. Setting the value manually makes the sound work again. This patch
does this automatically.
While being on it, I also fixed the comment formatting of the quirk and
shortened variable and function names.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Fixes: dd6dd6e3c7 ("ALSA: hda/realtek: Add quirk for TongFang PHxTxX1")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211202165010.876431-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There's a system that reports a bogus HDMI audio interface:
$ cat eld#2.0
monitor_present 1
eld_valid 1
monitor_name
connection_type DisplayPort
eld_version [0x2] CEA-861D or below
edid_version [0x3] CEA-861-B, C or D
manufacture_id 0xe430
product_id 0x690
port_id 0x0
support_hdcp 0
support_ai 0
audio_sync_delay 0
speakers [0xffff] FL/FR LFE FC RL/RR RC FLC/FRC RLC/RRC FLW/FRW FLH/FRH TC FCH
sad_count 0
Since playing audio is not possible without SAD, also consider ELD is
invalid for this case.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20211202073338.1384768-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
