The MIPSsim platform is no longer supported or used.
[ralf@linux-mips.org: Also remove mipssim from arch/mips/Kbuild.platforms
and delete arch/mips/include/asm/mach-mipssim/*.]
Signed-off-by: Steven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4350/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If it's set, SIGPENDING is also set. And SIGPENDING is present in
the masks...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
No need to keep 4 copies of that stuff; merged and taken to
entry.S, unused public symbols there killed off.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
YAMON requires and enforces the RTC Data Mode (Register B, DM bit) to
binary, that is the bit is set every time the board goes through the
firmware bootstrap sequence. Likewise its calendar manipulation commands
interpret or set the RTC registers unconditionally as binary, never
actually checking what the value of the DM bit is, under the (correct)
assumption that it has been previously set, to indicate the binary mode.
A change to Linux a while ago however introduced a platform-specific
tweak that clears that bit and therefore forces the data mode to BCD.
This causes clock corruption and misinterpretation that has to be fixed up
by user-mode tools in system startup scripts as the initial clock is often
incorrect according to the BCD interpretation forced.
This change removes the hack; a comment included refers to alarm code,
but even if it was broken at one point by requiring the BCD mode, it
should have been trivially corrected and even if not, given how rarely the
alarm feature is used, that was not really a reasonable justification to
break the system clock that is indeed used by virtually everything. And
either way the alarm code has been since fixed anyway.
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4336/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Remove usage of the 'kernel_uses_smartmips_rixi' macro from all files
and use new 'cpu_has_rixi' instead.
Signed-off-by: Steven J. Hill <sjhill@mips.com>
Acked-by: David Daney <david.daney@cavium.com>
Originally both Read Inhibit (RI) and Execute Inhibit (XI) were
supported by the TLB only for a SmartMIPS core. The MIPSr3(TM)
Architecture now defines an optional feature to implement these
TLB bits separately. Support for one or both features can be
checked by looking at the Config3.RXI bit.
Signed-off-by: Steven J. Hill <sjhill@mips.com>
Acked-by: David Daney <david.daney@cavium.com>
The EXT and INS instructions can be used to decrease code size and
thus speed up TLB handlers on MIPS32R2 and MIPS64R2 cores.
Signed-off-by: Steven J. Hill <sjhill@mips.com>
The architecture specification says that an EHB instruction is
needed to avoid a hazard when writing TLB entries. However, some
cores do not have this hazard, and thus the EHB instruction causes
a costly pipeline stall. Detect these cores and do not use the EHB
instruction.
Signed-off-by: Steven J. Hill <sjhill@mips.com>
When dealing with multiple VPEs, the count needs to be one-based
for correct initialization of the GIC.
Signed-off-by: Steven J. Hill <sjhill@mips.com>
The GIC interrupt code is used by multiple platforms and the
current code was half Malta dependent code. These changes
abstract away the platform specific differences.
Signed-off-by: Steven J. Hill <sjhill@mips.com>
Change MIPS configuration files to add the SEAD-3. Also add
new default configuration file for a SEAD-3 kernel.
Signed-off-by: Steven J. Hill <sjhill@mips.com>
More information about the SEAD-3 platform can be found at
<http://www.mips.com/products/development-kits/mips-sead-3/>
on MTI's site. Currently, the M14K family of cores is what
the SEAD-3 is utilised with.
Signed-off-by: Douglas Leung <douglas@mips.com>
Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Steven J. Hill <sjhill@mips.com>
The driver was using a 16 bit field for storing the shadow value of the shift
register cascade. This resulted in only the first 2 shift registeres receiving
the correct data. The third shift register would always receive 0x00.
Fix this by using a 32bit field for the shadow value.
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-kernel@vger.kernel.org
The gpio_chip struct allows us to set a .to_irq callback. Once this is set
we can rely on the generic __gpio_to_irq() function to map gpio->irq allowing
more than one gpio_chip to register an interrupt
Signed-off-by: John Crispin <blogic@openwrt.org>
Implement support for pinctrl on lantiq/falcon socs. The FALCON has 5 banks
of up to 32 pins.
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Implement support for pinctrl on lantiq/xway socs. The IO core found on these
socs has the registers for pinctrl, pinconf and gpio mixed up in the same
register range. As the gpio_chip handling is only a few lines, the driver also
implements the gpio functionality. This obseletes the old gpio driver that was
located in the arch/ folder.
Signed-off-by: John Crispin <blogic@openwrt.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
No code changes. Recent patches have used the netdev style multi-line
comment formatting, making the style inconsistent within octeon_mgmt.c
Update the remaining comment blocks to achieve style harmony.
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: David S. Miller <davem@davemloft.net>
Use eth_mac_addr(), and generate a random address if none is otherwise
assigned.
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: David S. Miller <davem@davemloft.net>
Correctly show no link when the interface is down, and return
-EOPNOTSUPP for things that don't work. This quiets the ethtool
program when run on down interfaces.
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: David S. Miller <davem@davemloft.net>
Octeon cn6XXX models have timestamp support on the mgmt ports, so hook
it up.
Signed-off-by: Chad Reese <kreese@caviumnetworks.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: David S. Miller <davem@davemloft.net>
The original hardware only supported 10M and 100M. Later versions
added 1G support. Here we update the driver to make use of this.
Also minor logic clean-ups for testing PHY registration error codes
and TX complete high water marks.
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: David S. Miller <davem@davemloft.net>
For CIUv1 controllers, we were relying on all calls to the irq_chip
functions to be done from the CPU that received the irq, and that they
would all be done from interrupt contest. These assumptions do not
hold for threaded handlers.
We make all the masking actually mask the irq source, and use real
raw_spin_locks instead of manually twiddling the Status[IE] bit.
Signed-off-by: David Daney <david.daney@cavium.com>
The cn68XX has a new interrupt controller named CIU2, add support for
this, and use it if cn68XX detected at runtime.
Signed-off-by: David Daney <david.daney@cavium.com>
Add support for cn68xx, cn61xx, cn63xx, cn66xx and cnf71XX.
Add little-endian register layouts.
Patch cvmx-interrupt-rsl.c for changed definition.
Signed-off-by: David Daney <david.daney@cavium.com>
Also add cvmx_get_octeon_family().
Both of these are needed by the upcoming register definition refresh
patch.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Reviewed-by: Jonas Gorski <jonas.gorski@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/4111/
Signed-off-by: John Crispin <blogic@openwrt.org>
