Add 3 new topology IPC ops for widget_setup, widget_free and dai_config
in order to make the pipeline management code IPC agnostic and implement
the ops for IPC3.
Use the newly introduced tplg dai_config op to configure the DAI during
BE DAI hw_params and hw_free.
Also, in preparation for IPC4, modify BE hw_params callback to skip
setting up the DAI widget. All widgets will be set up during FW
hw_params and the DAI_CONFIG IPC should be sent only if the widget
use_count is > 0. With setting up/freeing removed from the BE hw_params,
remove the configured flag as it is no longer needed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new client driver for probes support and move
all the probes-related code from the core to the
client driver.
The probes client driver registers a component driver
with one CPU DAI driver for extraction and creates a
new sound card with one DUMMY DAI link with a dummy codec
that will be used for extracting audio data from specific
points in the audio pipeline.
The probes debugfs ops are based on the initial
implementation by Cezary Rojewski and have been moved
out of the SOF core into the client driver making it
easier to maintain. This change will make it easier
for the probes functionality to be added for all platforms
without having the need to modify the existing(15+) machine
drivers.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220210150525.30756-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code maximizes confusion by using 'stream' and 'hstream'
variables of different types, e.g:
struct hdac_stream *stream;
struct hdac_ext_stream *stream;
struct hdac_stream *hstream;
struct hdac_ext_stream *hstream;
This confusion is partly inherited from legacy code but SOF
contributors added their own creative spin, e.g.
struct hdac_ext_stream *link_dev;
struct hdac_ext_stream *dsp_stream;
struct hdac_ext_stream hda_stream;
and my personal favorite:
stream = &hda_stream->hda_stream;
This patch suggests a consistent naming across all Intel code related
to HDAudio stream management. The convention is - by hierarchical
order:
struct sof_intel_hda_stream *hda_stream;
struct hdac_ext_stream *hext_stream;
struct hdac_stream *hstream;
No functionality change - just renaming of variables/members.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220209063104.9971-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The code inherited from the Skylake driver does not seem to follow any
known hardware recommendations.
The only two recommended options are
a) use DPIB registers if VC1 traffic is not allowed
b) use DPIB DDR update if VC1 traffic is used
In all of SOF-based updated, VC1 is not supported so we can 'safely'
move to using DPIB registers only.
This patch keeps the legacy code, in case there was an undocumented
issue lost to history, and adds the DPIB DDR update for additional
debug.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211207193947.71080-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some DAI components, such as HDaudio, need to be stopped in two steps
a) stop the DAI component
b) stop the DAI DMA
This patch enables this two-step stop by expanding the DAI_CONFIG
IPC flags and split them into 2 parts.
The 4 LSB bits indicate when the DAI_CONFIG IPC is sent, ex: hw_params,
hw_free or pause. The 4 MSB bits are used as the quirk flags to be used
along with the command flags. The quirk flag called
SOF_DAI_CONFIG_FLAGS_2_STEP_STOP shall be set along with the HW_PARAMS
command flag, i.e. before the pipeline is started so that the stop/pause
trigger op in the FW can take the appropriate action to either
perform/skip the DMA stop. If set, the DMA stop will be executed when
the DAI_CONFIG IPC is sent during hw_free. In the case of pause, DMA
pause will be handled when the DAI_CONFIG IPC is sent with the PAUSE
command flag.
Along with this, modify the signature for the hda_ctrl_dai_widget_setup/
hda_ctrl_dai_widget_free() functions to take additional flags as an
argument and modify all users to pass the appropriate quirk flags. Only
the HDA DAI's need to pass the SOF_DAI_CONFIG_FLAGS_2_STEP_STOP quirk
flag during hw_params to indicate that it supports two-step stop and
pause.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211125101520.291581-10-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When we disable rewinds, then the .ack can be used to program SPIB
with the application pointer, which allows the HDaudio DMA to save
power by opportunistically bursting data transfers when the path to
memory is enabled (and conversely to shut it down when there are no
transfer requests).
The SPIB register can only be programmed with incremental values with
wrap-around after the DMA RUN bits are set. For simplicity, we set the
INFO_NO_REWINDS flag in the .open callback when we already need to
program the SNDRV_PCM_INFO_SYNC_APPLPTR flag.
Rewinds are not used by many applications. One notable application
using rewinds is PulseAudio. Practical experiments with
Ubuntu/PulseAudio default settings did not show any audible issues,
but the user may hear volume changes and notification with a delay,
depending on the size of the ring buffer and latency constraints.
The choice of disabling rewinds is exposed as a kernel parameter and
not a Kconfig option to avoid any undesirable side-effects.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211119230852.206310-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Updates for v5.12
Another quiet release in terms of features, though several of the
drivers got quite a bit of work and there were a lot of general changes
resulting from Morimoto-san's ongoing cleanup work.
- As ever, lots of hard work by Morimoto-san cleaning up the code and
making it more consistent.
- Many improvements in the Intel drivers including a wide range of
quirks and bug fixes.
- A KUnit testsuite for the topology code.
- Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured
nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro
- Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers.
The i915 display power is requested both by controller (for init
and link reset) as well as by codec driver (for codec control).
There's an additional constraint that on some platforms frequent changes
to display power state may cause visible flicker. To avoid this, the SOF
hda controller requests display power whenever it is active and only
releases it when runtime suspended.
This patch utilizes the new hdac_bus link_power op to plug
into HDA link state changes. By monitoring link state changes,
we can keep the controller side display power wakeref until
the codec driver has completed its work, and only release
the wakeref when codec driver is suspended.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210205184630.1938761-4-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a SoundWire link is in clock stop state, a Slave device may wake
up the Master for some events such as jack detection. The WAKEEN
interrupt will be triggered and processed by the audio pci device.
If audio device is in D3, the interrupt will be routed to PME, or
aggregated at cAVS level as interrupt when audio device is in D0. This
patch only supports D3 case, where the audio pci device will be
resumed by a PME event and the WAKEEN interrupt will be processed
after audio pci device is powered up and ROM is initialized
successfully.
The WAKEEN handling is only enabled after the first boot due to
dependencies on a shim_lock mutex being initialized.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the SoundWire core supports the multi-step initialization,
call the relevant APIs.
The actual hardware enablement can be done in two places, ideally we'd
want to startup the SoundWire IP as soon as possible (while still
taking power rail dependencies into account)
However when suspend/resume is implemented, the DSP device will be
resumed first, and only when the DSP firmware is downloaded/booted
would the SoundWire child devices be resumed, so there are only
marginal benefits in starting the IP earlier for the first probe.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
