To improve the performance, We add some initial setting for smi larbs.
there are two part:
1), Each port has the special ostd(outstanding) value in each larb.
2), Two general settings for each larb.
a. THRT_UPDATE: the value in bits[7:4] of 0x24 is not so good.
The HW default is 4, and we expect it is 5, thus, add a flag to update
it. This is only a DE recommendatory value, not a actual issue.
The register name(THRT_CON) means: throttling control, and the field
RD_NU_LMT means: Read Non-ultra commands limit.
This change means update the Read non-ultra command from 4 to 5 here.
b. SW_FLAG: Set 1 to the FLAG register. this is only for helping
debug. We could confirm if the larb is reset from this value is 1 or 0.
In some SoC, this setting maybe changed dynamically for some special case
like 4K, and this initial setting is enough in mt8195.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210914113703.31466-13-yong.wu@mediatek.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
In mt8195, there are some larbs connect with the smi-sub-common, then
connect with smi-common.
Before we create device link between smi-larb with smi-common. If we have
sub-common, we should use device link the smi-larb and smi-sub-common,
then use device link between the smi-sub-common with smi-common. This is
for enabling clock/power automatically.
Move the device link code to a new interface for reusing.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Link: https://lore.kernel.org/r/20210914113703.31466-8-yong.wu@mediatek.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Use clk_bulk interface instead of the orginal one to simplify the code.
For SMI larbs: Require apb/smi clocks while gals is optional.
For SMI common: Require apb/smi/gals0/gal1 in has_gals case. Otherwise,
also only require apb/smi, No optional clk here.
About the "has_gals" flag, for smi larbs, the gals clock also may be
optional even this platform support it. thus it always use
*_bulk_get_optional, then the flag has_gals is unnecessary. Remove it.
The smi_common's has_gals still keep it.
Also remove clk fail logs since bulk interface already output fail log.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210914113703.31466-4-yong.wu@mediatek.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
State syncing works properly now, previously the sync callback was never
invoked. Apparently it was fixed in drivers core, so let's remove the
hack. The state won't be synced until all consumer drivers of devices
that reference memory controller in a device-tree are probed, i.e. keeping
bandwidth at maximum until both display and devfreq drivers are probed.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210912183009.6400-1-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The tegra186_mc_client_sid_override() is only called from
an #ifdef block:
drivers/memory/tegra/tegra186.c:74:13: error: 'tegra186_mc_client_sid_override' defined but not used [-Werror=unused-function]
74 | static void tegra186_mc_client_sid_override(struct tegra_mc *mc,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Add another #ifdef around the called function.
Fixes: 393d66fd2c ("memory: tegra: Implement SID override programming")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20210722090748.1157470-1-arnd@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Memory controller drivers for v5.14 - Tegra SoC, part two
Second set of changes for Tegra SoC memory controller drivers,
containing patchset from Thierry Reding:
"The goal here is to avoid early identity mappings altogether and instead
postpone the need for the identity mappings to when devices are attached
to the SMMU. This works by making the SMMU driver coordinate with the
memory controller driver on when to start enforcing SMMU translations.
This makes Tegra behave in a more standard way and pushes the code to
deal with the Tegra-specific programming into the NVIDIA SMMU
implementation."
This pulls a dependency from Will Deacon (ARM SMMU driver) and contains
further ARM SMMU driver patches to resolve complex dependencies between
different patchsets. The pull from Will contains only one patch
("Implement ->probe_finalize()"). Further work in Will's tree might
depend on this patch, therefore patch was applied there.
On the other hand, this ("Implement ->probe_finalize()") patch is also a
dependency for ARM SMMU driver changes for Tegra. These changes,
bringing seamless transition from the firmware framebuffer to the OS
framebuffer, depend on earlier Tegra memory controller driver patches.
* tag 'memory-controller-drv-tegra-5.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: (37 commits)
iommu/arm-smmu: Use Tegra implementation on Tegra186
iommu/arm-smmu: tegra: Implement SID override programming
iommu/arm-smmu: tegra: Detect number of instances at runtime
dt-bindings: arm-smmu: Add Tegra186 compatible string
memory: tegra: Delete dead debugfs checking code
iommu/arm-smmu: Implement ->probe_finalize()
memory: tegra: Implement SID override programming
memory: tegra: Split Tegra194 data into separate file
memory: tegra: Add memory client IDs to tables
memory: tegra: Unify drivers
memory: tegra: Only initialize reset controller if available
memory: tegra: Make IRQ support opitonal
memory: tegra: Parameterize interrupt handler
memory: tegra: Extract setup code into callback
memory: tegra: Make per-SoC setup more generic
memory: tegra: Push suspend/resume into SoC drivers
memory: tegra: Introduce struct tegra_mc_ops
memory: tegra: Unify struct tegra_mc across SoC generations
memory: tegra: Consolidate register fields
memory: tegra30-emc: Use devm_tegra_core_dev_init_opp_table()
...
Link: https://lore.kernel.org/r/20210614195200.21657-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Memory controller drivers for v5.14 - PL353
Bigger work around ARM Primecell PL35x SMC memory controller driver by
Miquel Raynal built on previous series from Naga Sureshkumar Relli.
This includes bindings cleanup and correction, converting these to
dtschema and several cleanyps in pl353-smc driver.
* tag 'memory-controller-drv-pl353-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
dt-binding: memory: pl353-smc: Convert to yaml
MAINTAINERS: Add PL353 SMC entry
memory: pl353-smc: Declare variables following a reverse christmas tree order
memory: pl353-smc: Avoid useless acronyms in descriptions
memory: pl353-smc: Let lower level controller drivers handle inits
memory: pl353-smc: Rename goto labels
memory: pl353-smc: Fix style
dt-binding: memory: pl353-smc: Fix the NAND controller node in the example
dt-binding: memory: pl353-smc: Drop unsupported nodes from the example
dt-binding: memory: pl353-smc: Fix the example syntax and style
dt-binding: memory: pl353-smc: Describe the child reg property
dt-binding: memory: pl353-smc: Drop the partitioning section
dt-binding: memory: pl353-smc: Document the range property
dt-binding: memory: pl353-smc: Rephrase the binding
Link: https://lore.kernel.org/r/20210611140659.61980-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Olof Johansson <olof@lixom.net>
There is no point in having all these definitions at the SMC bus level,
these are extremely tight to the NAND controller driver implementation,
are not particularly generic, imply more boilerplate than needed, do
not really follow the device model by receiving no argument and some of
them are actually buggy.
Let's get rid of these right now as there is no current user and keep
this driver at a simple level: only the SMC bare initializations.
The NAND controller driver which I am going to introduce will take care
of redefining properly all these helpers and using them directly.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20210610082040.2075611-13-miquel.raynal@bootlin.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The driver defined several functions related to handling of frequency
and voltage changes:
- freq_post_notify_handling
- freq_pre_notify_handling
- volt_notify_handling
All these are static, not used inside or outside of driver, and marked
as unused with comment: "TODO: voltage notify handling should be hooked
up to regulator framework as soon as the necessary support is available
in mainline kernel. This function is un-used right now.".
These have been added with commit a93de288aa ("memory: emif: handle
frequency and voltage change events") in 2012 and are unused since then.
Additionally mentioned regulator and clock hooking did not happen since
then. If it did not happen for nine years, let's assume it will not
happen suddenly now.
Remove all unused functions which also allows removal of "t_ck" static
variable "t_ck" and "addressing" member of private structure.
No functionality is lost.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210527154101.80556-1-krzysztof.kozlowski@canonical.com
The debugfs_create_dir() function does not return NULL, it returns error
pointers. But in normal situations like this where the caller is not
dereferencing "emc->debugfs.root" then we are not supposed to check the
return. So instead of fixing these checks, we should delete them.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YMCQDTSyG8UuQoh0@mwanda
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Instead of programming all SID overrides during early boot, perform the
operation on-demand after the SMMU translations have been set up for a
device. This reuses data from device tree to match memory clients for a
device and programs the SID specified in device tree, which corresponds
to the SID used for the SMMU context banks for the device.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210603164632.1000458-2-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The Tegra210 (and earlier) driver now supports all the functionality
that the Tegra186 (and later) driver does, so they can be unified.
Note that previously the Tegra186 (and later) driver could be unloaded,
even if that was perhaps not very useful. Older chips don't support that
yet, but once they do this code can be reenabled.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210602163302.120041-11-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The current per-SoC setup code runs at a fairly arbitrary point during
probe, thereby making it less flexible for other SoC generations. Move
the call around slightly (after only the very basic, common setup that
applies to all SoC generations has been performed), which will allow
it to be used for other implementations.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210602163302.120041-6-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
As another step towards unifying both the Tegra210 (and earlier) and
Tegra186 (and later) memory controller drivers, unify the structures
that are used to represent them.
Note that this comes at a slight space penalty since some fields are
not used on all generations, but the benefits of unifying the driver
outweigh the downsides.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210602163302.120041-3-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Fix compilation warning on 64bit platforms caused by implicit promotion
of 32bit signed integer to a 64bit unsigned value which happens after
enabling compile-testing of the EMC drivers.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Early exits from for_each_available_child_of_node() should decrement the
node reference counter. Reported by Coccinelle:
drivers/memory/atmel-ebi.c:593:1-33: WARNING:
Function "for_each_available_child_of_node" should have of_node_put() before return around line 604.
Fixes: 6a4ec4cd08 ("memory: add Atmel EBI (External Bus Interface) driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210423101815.119341-2-krzysztof.kozlowski@canonical.com
