Commit Graph

253290 Commits

Author SHA1 Message Date
Williams, Mitch A
cabe0700c5 igbvf: update version number
Update the version number to match version conventions. Bump the major
version to indicate that new hardware support (i350) has been added.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-09 20:35:20 -07:00
Bruce Allan
b3ccf26704 e1000e: update driver version
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-09 20:34:58 -07:00
Bruce Allan
7ff1c8bb7c e1000e: remove redundant reverse dependency on CRC32
Commit 5d03078a68 added a redundant 'select
CRC32'; remove it.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-09 20:34:37 -07:00
Bruce Allan
3ebfc7c9a6 e1000e: Clear host wakeup bit on 82577/8 without touching PHY page 800
The Host Wakeup Active bit in the PHY Port General Configuration register
(page 769 register 17) must be cleared after every PHY reset to prevent an
unexpected wake signal from the PHY. Originally, this was accomplished by
simply reading the PHY Wakeup Control register on page 800 which clears the
Host Wakeup Active bit as a side-effect. Unfortunately, a hardware bug on
the 82577 and 82578 PHY can cause unexpected behavior when registers on
page 800 are accessed while in gigabit mode.

This patch changes the remaining instances when the Host Wakeup Active bit
needs to be cleared while possibly in gigabit mode by accessing the Port
General Configuration register directly instead of accessing any register
on page 800.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-09 20:34:14 -07:00
Bruce Allan
2b6b168d52 e1000e: access multiple PHY registers on same page at the same time
Doing a PHY page select can take a long time, relatively speaking. This
can cause a significant delay when updating a number of PHY registers on
the same page by unnecessarily setting the page for each PHY access. For
example when going to Sx, all the PHY wakeup registers (WUC, RAR[], MTA[],
SHRAR[], IP4AT[], IP6AT[], etc.) on 82577/8/9 need to be updated which
takes a long time which can cause issues when suspending.

This patch introduces new PHY ops function pointers to allow callers to
set the page directly and do any number of PHY accesses on that page.
This feature is currently only implemented for 82577, 82578 and 82579
PHYs for both the normally addressed registers as well as the special-
case addressing of the PHY wakeup registers on page 800. For the latter
registers, the existing function for accessing the wakeup registers has
been divided up into three- 1) enable access to the wakeup register page,
2) perform the register access and 3) disable access to the wakeup register
page. The two functions that enable/disable access to the wakeup register
page are necessarily available to the caller so that the caller can restore
the value of the Port Control (a.k.a. Wakeup Enable) register after the
wakeup register accesses are done.

All instances of writing to multiple PHY registers on the same page are
updated to use this new method and to acquire any PHY locking mechanism
before setting the page and performing the register accesses, and release
the locking mechanism afterward.

Some affiliated magic number cleanup is done as well.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-09 20:33:36 -07:00
Bruce Allan
400484fa65 e1000e: do not schedule the Tx queue until ready
Start the Tx queue when the interface is brought up in e1000e_up() but do
not schedule the queue until link is up as detected in the watchdog task
which sets netif_carrier_on.

Also flush the descriptors and clean the Tx and Rx rings before resetting
the hardware when bringing the interface down otherwise there is a small
window where the watchdog task can be triggered with netif_carrier_off
and the Tx ring not yet empty which causes an additional and unnecessary
reset.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-09 20:33:08 -07:00
Bruce Allan
c5caf4825b e1000e: log when swflag is cleared unexpectedly on ICH/PCH devices
Since EXTCNF_CTRL.SWFLAG (used in the ownership arbitration of shared
resources, e.g. the PHY shared between the s/w, f/w, and h/w clients)
can be cleared by any of those clients, log a debug message when
software attempts to clear it and it is already cleared unexpectedly.
And since the swflag is cleared by a hardware reset, the driver does
not need to do that, but the mutex acquired when the bit is set must
still be cleared.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-09 20:32:28 -07:00
Bruce Allan
99730e4c13 e1000e: 82579 intermittently disabled during S0->Sx
When repeatedly cycling Sx->S0 states with the network cable unplugged,
the 82579 PHY may not initialize as expected and may require a full power
cycle to recover functionality to the device.  Workaround this by testing
access of the PHY registers after resuming; if that returns unexpected
results toggle the LANPHYPC signal to power cycle the PHY.

This is implemented in the new function e1000_resume_workarounds_pchlan()
which calls another new function, e1000_toggle_lanphypc_value_ich8lan(),
which has been created to reduce code duplication (same functionality
required by a previous workaround).  Also, e1000e_disable_gig_wol_ich8lan
is now e1000_suspend_workarounds_ich8lan to better reflect what it does.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-09 20:31:49 -07:00
Bruce Allan
d9b24135b9 e1000e: disable far-end loopback mode on ESB2
The ESB2 LAN includes a debug feature that enables far-end loopback (FELB)
of the SerDes/Kumeran interface.  This feature is activated when receiving
a sequence of symbols that includes a reserved codeword.  On a perfect
link, FELB would never be activated.  In the presence of bit errors, there
is a very small, but non-zero, probability of FELB being activated.

If the FELB is activated, the SerDes link becomes non-functional and must
be reset.  It could also corrupt the switching tables in the switch since
the ESB2 is transmitting packets with a different source MAC address.

This patch disables the FELB feature.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-09 20:31:24 -07:00
Peter Pan(潘卫平)
e357964ee6 bonding: delete unused arp_mon_pt
Now all received packets are handled by bond_handle_frame,
and arp_mon_pt isn't used any more.

Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Weiping Pan <panweiping3@gmail.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-09 15:02:19 -07:00
Peter Pan(潘卫平)
0cc42eb608 bonding: delete unused ad_timer
Now we use agg_select_timer and ad_work.

Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Weiping Pan <panweiping3@gmail.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-09 15:02:19 -07:00
Peter Pan(潘卫平)
1a14fbcbc9 bonding:delete agg_select_mode from ad_bond_info
bond_params->ad_select and ad_bond_info->agg_select_mode have the same
meaning, they are duplicate and need extra synchronization.

__get_agg_selection_mode() get ad_select from bond_params directly.

Signed-off-by: Weiping Pan <panweiping3@gmail.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-09 15:02:19 -07:00
Peter Pan(潘卫平)
56d00c677d bonding:delete lacp_fast from ad_bond_info
These is also a bug, that if you modify lacp_rate via sysfs,
and add new slaves in bonding, new slaves won't use the latest lacp_rate,
since ad_bond_info->lacp_fast is initialized only once,
in bond_3ad_initialize().

Since both struct bond_params and ad_bond_info have lacp_fast,
they are duplicate and need extra synchronization.

bond_3ad_bind_slave() can use bond_params->lacp_fast to initialize port.
So we can just remove lacp_fast from struct ad_bond_info.

Signed-off-by: Weiping Pan <panweiping3@gmail.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-09 15:02:19 -07:00
Peter Pan(潘卫平)
ba824a8b2d bonding: make 802.3ad use latest lacp_rate
There is bug that when you modify lacp_rate via sysfs,
802.3ad won't use the new value of lacp_rate to transmit packets.
This is because port->actor_oper_port_state isn't changed.

Signed-off-by: Weiping Pan <panweiping3@gmail.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-09 15:02:18 -07:00
Vasanthy Kolluri
b880a954b9 enic: Bug Fix: Fix hardware transmit queue indexing in enic_poll_controller
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Danny Guo <dannguo@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: David Wang <dwang2@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-09 14:58:09 -07:00
Vasanthy Kolluri
7d260ec26e enic: Get/Set interrupt resource index for transmit and receive queues
Instead of deriving the index of a transmit/receive interrupt resource
from the transmit/receive queue index, always save and retrieve it
using an additional variable.

Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Danny Guo <dannguo@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: David Wang <dwang2@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-09 14:58:09 -07:00
Vasanthy Kolluri
e1fb77bfd0 enic: Log device configuration in detail during driver load
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Danny Guo <dannguo@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: David Wang <dwang2@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-09 14:58:09 -07:00
Vasanthy Kolluri
8757446d8d enic: Pass 802.1p bits for packets tagged with vlan zero
enic driver currently passes 802.1p bits to the upper layers for packets
tagged with non-zero vlan ids only. This patch extends such behaviour to
zero vlan tagged packets also.

The patch is dependant on the following kernel patches:

1) vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)
   - net-next-2.6 git commit: ad1afb0039
   - Available 2.6.36 and later
2) vlan: Centralize handling of hardware acceleration.
  - net-next-2.6 git commit: 3701e51382
  - Available 2.6.37 and later

Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Danny Guo <dannguo@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: David Wang <dwang2@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-09 14:58:09 -07:00
David S. Miller
6018e1183b Merge branch 'batman-adv/next' of git://git.open-mesh.org/ecsv/linux-merge 2011-06-09 14:56:13 -07:00
Marek Lindner
ecbd532108 batman-adv: use NO_FLAGS define instead of hard-coding 0
The definition NO_FLAGS was introduced to make the code more
readable and shall be used to initialize flag fields.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-06-09 20:40:38 +02:00
Sven Eckelmann
e8958dbf0d batman-adv: Use enums for related constants
CodingStyle "Chapter 12: Macros, Enums and RTL" recommends to use enums
for several related constants. Internal states can be used without
defining the actual value, but all values which are visible to the
outside must be defined as before. Normal values are assigned as usual
and flags are defined by shifts of a bit.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-06-09 20:40:38 +02:00
Sven Eckelmann
3d222bbaa7 batman-adv: Rewrite debugfs kobj_to_* helpers as functions
CodingStyle "Chapter 12: Macros, Enums and RTL" highly recommends to use
functions instead of macros were possible. This ensures type safety and
prevents shadowing of other variables.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-06-09 20:40:38 +02:00
Sven Eckelmann
e72948eb21 batman-adv: Fix signedness problem in parse_gw_bandwidth
strict_strtoul as used in parse_gw_bandwidth is defined for unsigned
long and strict_strtol should be used instead for long.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-06-09 20:40:38 +02:00
Sven Eckelmann
6b9aadfa97 batman-adv: Don't return value in void function
gw_node_delete is defined with "void" as return type, but still tries to
return a value. The called function gw_node_delete is also return as
void and thus doesn't provide a value for us.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-06-09 20:40:38 +02:00
Daniele Furlan
d1829fa0c3 batman-adv: accept delayed rebroadcasts to avoid bogus routing under heavy load
When a link is saturated (re)broadcasts of OGMs are delayed. Under heavy
load this delay may exceed the orig interval which leads to OGMs being
dropped (the code would only accept an OGM rebroadcast if it arrived
before the next OGM was broadcasted). With this patch batman-adv will
also accept delayed OGMs in order to avoid a bogus influence on the
routing metric.

Signed-off-by: Daniele Furlan <daniele.furlan@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-06-09 20:40:37 +02:00
Michal Simek
075cd29e30 net: emaclite: Add missing linux/interrupt.h header
Log:
drivers/net/xilinx_emaclite.c: In function 'xemaclite_open':
drivers/net/xilinx_emaclite.c:961: error: implicit declaration of function 'request_irq'
drivers/net/xilinx_emaclite.c: In function 'xemaclite_close':
drivers/net/xilinx_emaclite.c:995: error: implicit declaration of function 'free_irq'
make[2]: *** [drivers/net/xilinx_emaclite.o] Error 1
make[1]: *** [drivers/net] Error 2
make: *** [drivers] Error 2

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-09 01:29:13 -07:00
Amos Kong
61a5ff15eb tun: do not put self in waitq if doing a nonblock read
Perf shows a relatively high rate (about 8%) race in
spin_lock_irqsave() when doing netperf between external host and
guest. It's mainly becuase the lock contention between the
tun_do_read() and tun_xmit_skb(), so this patch do not put self into
waitqueue to reduce this kind of race. After this patch, it drops to
4%.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-09 00:27:10 -07:00
stephen hemminger
6f7c156c08 tun: dont force inline of functions
Current standard practice is to not mark most functions as inline
and  let compiler decide instead.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-09 00:08:39 -07:00
stephen hemminger
a504b86e71 tun: reserves space for network in skb
The tun driver allocates skb's to hold data from user and then passes
the data into the network stack as received data. Most network devices
allocate the receive skb with routines like dev_alloc_skb() that reserves
additional space for use by network protocol stack but tun does not.

Because of the lack of padding, when the packet is passed through bridge
netfilter a new skb has to be allocated.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-09 00:08:38 -07:00
Michael Chan
7625eb2f2f cnic, bnx2: Check iSCSI support early in bnx2_init_one()
Based on earlier patch from Neil Horman <nhorman@tuxdriver.com>

If iSCSI is not supported on a bnx2 device, bnx2_cnic_probe() will
return NULL and the cnic device will not be visible to bnx2i.  This
will prevent bnx2i from registering and then unregistering during
cnic_start() and cause the warning message:

bnx2 0003:01:00.1: eth1: Failed waiting for ULP up call to complete

Signed-off-by: Michael Chan <mchan@broadcom.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 23:52:37 -07:00
Michael Chan
db1d350fcb cnic: Improve NETDEV_UP event handling
During NETDEV_UP, we use symbol_get() to get the net driver's cnic
probe function.  This sometimes doesn't work if NETDEV_UP happens
right after NETDEV_REGISTER and the net driver is still running module
init code.  As a result, the cnic device may not be discovered.  We
fix this by probing on all NETDEV events if the device's netif_running
state is up.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 23:52:37 -07:00
Eddie Wai
11f23aa8cc cnic: Randomize initial TCP port for iSCSI connections
This reduces the likelihood of port re-use when re-loading the driver.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 23:52:36 -07:00
Michael Chan
101c40c8cb cnic: Fix race conditions with firmware
During iSCSI connection terminations, if the target is also terminating
at about the same time, the firmware may not complete the driver's
request to close or reset the connection.  This is fixed by handling
other events (instead of the expected completion event) as an indication
that the driver's request has been rejected.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 23:52:36 -07:00
Michael Chan
9373665613 cnic: Fix interrupt logic
We need to keep looping until cnic_get_kcqes() returns 0.  cnic_get_kcqes()
returns a maximum of 64 entries.  If there are more entries in the queue
and we don't loop back, the remaining entries may not be serviced for a
long time.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 23:52:36 -07:00
Eric Dumazet
2b77bdde97 inetpeer: lower false sharing effect
Profiles show false sharing in addr_compare() because refcnt/dtime
changes dirty the first inet_peer cache line, where are lying the keys
used at lookup time. If many cpus are calling inet_getpeer() and
inet_putpeer(), or need frag ids, addr_compare() is in 2nd position in
"perf top".

Before patch, my udpflood bench (16 threads) on my 2x4x2 machine :

             5784.00  9.7% csum_partial_copy_generic [kernel]
             3356.00  5.6% addr_compare              [kernel]
             2638.00  4.4% fib_table_lookup          [kernel]
             2625.00  4.4% ip_fragment               [kernel]
             1934.00  3.2% neigh_lookup              [kernel]
             1617.00  2.7% udp_sendmsg               [kernel]
             1608.00  2.7% __ip_route_output_key     [kernel]
             1480.00  2.5% __ip_append_data          [kernel]
             1396.00  2.3% kfree                     [kernel]
             1195.00  2.0% kmem_cache_free           [kernel]
             1157.00  1.9% inet_getpeer              [kernel]
             1121.00  1.9% neigh_resolve_output      [kernel]
             1012.00  1.7% dev_queue_xmit            [kernel]
# time ./udpflood.sh

real	0m44.511s
user	0m20.020s
sys	11m22.780s

# time ./udpflood.sh

real	0m44.099s
user	0m20.140s
sys	11m15.870s

After patch, no more addr_compare() in profiles :

             4171.00 10.7% csum_partial_copy_generic   [kernel]
             1787.00  4.6% fib_table_lookup            [kernel]
             1756.00  4.5% ip_fragment                 [kernel]
             1234.00  3.2% udp_sendmsg                 [kernel]
             1191.00  3.0% neigh_lookup                [kernel]
             1118.00  2.9% __ip_append_data            [kernel]
             1022.00  2.6% kfree                       [kernel]
              993.00  2.5% __ip_route_output_key       [kernel]
              841.00  2.2% neigh_resolve_output        [kernel]
              816.00  2.1% kmem_cache_free             [kernel]
              658.00  1.7% ia32_sysenter_target        [kernel]
              632.00  1.6% kmem_cache_alloc_node       [kernel]

# time ./udpflood.sh

real	0m41.587s
user	0m19.190s
sys	10m36.370s

# time ./udpflood.sh

real	0m41.486s
user	0m19.290s
sys	10m33.650s

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 23:31:27 -07:00
stephen hemminger
1a7a10325d niu: support 64 bit stats interface
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 23:26:33 -07:00
stephen hemminger
c5f7ef72fc myricom: update to 64 bit stats
Driver was already keeping 64 bit counters, just not using the new interface.

Ps: IMHO drivers should not be duplicating network device
stats into ethtool stats. It is useless duplication.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 23:26:33 -07:00
stephen hemminger
f20530bc98 enic: update to support 64 bit stats
The device driver already uses 64 bit statistics, it just
doesn't use the 64 bit interface.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 23:26:32 -07:00
stephen hemminger
47fd428cd0 netxen: convert to 64 bit statistics
Change to 64 bit statistics interface, driver was already maintaining 64 bit
value.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 23:26:32 -07:00
stephen hemminger
6311cc44a2 veth: convert to 64 bit statistics
Not much change, device was already keeping per cpu statistics.
Use recent 64 statistics interface.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 23:26:32 -07:00
stephen hemminger
95305f6c3b vmxnet3: convert to 64 bit stats interface
Convert vmxnet3 driver to 64 bit statistics interface.
This driver was already counting packet per queue in a 64 bit value so not
a huge change. Eliminate unused old net_device_stats structure.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Scott J. Goldman <scottjg@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 23:26:32 -07:00
Eric Dumazet
4b9d9be839 inetpeer: remove unused list
Andi Kleen and Tim Chen reported huge contention on inetpeer
unused_peers.lock, on memcached workload on a 40 core machine, with
disabled route cache.

It appears we constantly flip peers refcnt between 0 and 1 values, and
we must insert/remove peers from unused_peers.list, holding a contended
spinlock.

Remove this list completely and perform a garbage collection on-the-fly,
at lookup time, using the expired nodes we met during the tree
traversal.

This removes a lot of code, makes locking more standard, and obsoletes
two sysctls (inet_peer_gc_mintime and inet_peer_gc_maxtime). This also
removes two pointers in inet_peer structure.

There is still a false sharing effect because refcnt is in first cache
line of object [were the links and keys used by lookups are located], we
might move it at the end of inet_peer structure to let this first cache
line mostly read by cpus.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Andi Kleen <andi@firstfloor.org>
CC: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 17:05:30 -07:00
Jerry Chu
9ad7c049f0 tcp: RFC2988bis + taking RTT sample from 3WHS for the passive open side
This patch lowers the default initRTO from 3secs to 1sec per
RFC2988bis. It falls back to 3secs if the SYN or SYN-ACK packet
has been retransmitted, AND the TCP timestamp option is not on.

It also adds support to take RTT sample during 3WHS on the passive
open side, just like its active open counterpart, and uses it, if
valid, to seed the initRTO for the data transmission phase.

The patch also resets ssthresh to its initial default at the
beginning of the data transmission phase, and reduces cwnd to 1 if
there has been MORE THAN ONE retransmission during 3WHS per RFC5681.

Signed-off-by: H.K. Jerry Chu <hkchu@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 17:05:30 -07:00
stephen hemminger
aee80b54b2 ipv6: generate link local address for GRE tunnel
Use same logic as SIT tunnel to handle link local address
for GRE tunnel. OSPFv3 requires link-local address to function.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 17:05:30 -07:00
stephen hemminger
8ef207d63f iph: use default get_stats
This driver keeps stats in net_device stats therefore it
does not need to define it's own get_stats hook.

Also, use standard format for net_device_ops (without &).

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 17:05:29 -07:00
Alexander Duyck
bff55273f9 v2 ethtool: remove support for ETHTOOL_GRXNTUPLE
This change is meant to remove all support for displaying an ntuple as
strings via ETHTOOL_GRXNTUPLE.  The reason for this change is due to the
fact that multiple issues have been found including:
 - Multiple buffer overruns for strings being displayed.
 - Incorrect filters displayed, cleared filters with ring of -2 are displayed
 - Setting get_rx_ntuple displays no rules if defined.
 - Endianess wrong on displayed values.
 - Hard limit of 1024 filters makes display functionality extremely limited

The only driver that had supported this interface was ixgbe.  Since it no
longer uses the interface and due to the issues mentioned above I am
submitting this patch to remove it.

v2:
Updated based on comments from Ben Hutchings
 - Left ETH_SS_NTUPLE_FILTERS in code but commented on it being deprecated
 - Removed ethtool_rx_ntuple_list and ethtool_rx_ntuple_flow_spec_container
 - Left ETHTOOL_GRXNTUPLE but commented it as deprecated

Also cleaned up set_rx_ntuple since there is no flow spec container to
maintain we can drop all the code for the alloc and free of it and just
return ops->set_rx_ntuple().
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 16:45:31 -07:00
John W. Linville
c0c33addcb Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem 2011-06-08 13:44:21 -04:00
Stephen Rothwell
ffbc03bc75 net: add needed interrupt.h
Fixes these errors after the removal of interrupt.h from netdevice.h:

drivers/net/ll_temac_main.c: In function 'temac_open':
drivers/net/ll_temac_main.c:859:2: error: implicit declaration of function 'request_irq'
drivers/net/ll_temac_main.c:870:2: error: implicit declaration of function 'free_irq'
drivers/net/ll_temac_main.c: In function 'temac_poll_controller':
drivers/net/ll_temac_main.c:903:2: error: implicit declaration of function 'disable_irq'
drivers/net/ll_temac_main.c:909:2: error: implicit declaration of function 'enable_irq'

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 00:15:34 -07:00
Mohammed Shafi Shajakhan
931749bf78 ath9k: make use of a helper to get paprd scale factor
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07 14:46:13 -04:00
Yogesh Ashok Powar
36cb7cce23 mwifiex: disable transmission buffer aggregation for AMSDU packets
Padding per MSDU will affect the length of next packet and hence
the exact length of next packet is uncertain here.

Also, aggregation of transmission buffer, while downloading the
data to the card, wont gain much on the AMSDU packets as the AMSDU
packets utilizes the transmission buffer space to the maximum
(adapter->tx_buf_size).

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07 14:44:03 -04:00