Commit Graph

31 Commits

Author SHA1 Message Date
Mark Brown
41d5a70051 Merge remote-tracking branches 'spi/topic/lm70llp', 'spi/topic/loopback', 'spi/topic/mtk' and 'spi/topic/omap2-mcspi' into spi-next 2016-01-11 16:48:33 +00:00
Mark Brown
f30f072a5f Merge remote-tracking branch 'spi/fix/mtk' into spi-linus 2016-01-11 16:48:27 +00:00
Leilk Liu
15bcdefdc7 spi: mediatek: Add spi support for mt2701 IC
This patch adds spi support for mt2701 IC.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-31 22:10:02 +00:00
Leilk Liu
4eaf6f7303 spi: mediatek: merge all identical compat to mtk_common_compat
This patch merge all identical compat into on mtk_common_compat
and used for all compatible soc.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-31 22:09:59 +00:00
Nicolas Boichat
de327e4966 spi: mediatek: Prevent overflows in FIFO transfers
In the case where transfer length is not a multiple of 4, KASAN
reports 2 out-of-bounds memory accesses:
 - mtk_spi_interrupt: ioread32_rep writes past the end of
   trans->rx_buf.
 - mtk_spi_fifo_transfer: iowrite32_rep reads past the end of
   xfer->tx_buf.

Fix this by using memcpy on the remainder of the bytes.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-30 17:26:40 +00:00
Leilk Liu
e38da37fa8 spi: mediatek: revise mtk_spi_probe() failure flow
mtk_spi_probe() calls pm_runtime_enable(), after
pm_runtime_enable() is called, it should call
pm_runtime_disable() in the failure flow.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-25 11:55:00 +00:00
Mark Brown
4d920471d7 Merge branch 'fix/mediatek' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-mtk 2015-11-25 11:54:56 +00:00
leilk.liu@mediatek.com
4c3dbd35d4 spi: mediatek: remove needless pair of writel()/readl()
It's not need to re-read and re-write SPI_CMD_REG, so remove it.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-21 13:39:27 +00:00
Nicolas Boichat
98c8dccf2b spi: mediatek: single device does not require cs_gpios
When only one device is present, it is not necessary to specify
cs_gpios, as the CS line can be controlled by the hardware
module.

Without this patch, older device tree bindings used before
37457607 "spi: mediatek: mt8173 spi multiple devices support"
would cause a panic on boot. This fixes the crash, and
re-introduces backward compatibility.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-16 17:44:57 +00:00
Leilk Liu
37457607ec spi: mediatek: mt8173 spi multiple devices support
mt8173 IC spi HW has 4 gpio group, it's possible to support
max <= 4 slave devices, even mtk spi HW is not congruent to spi core.
1. When a device do a spi_message transfer, spi HW should know
   which pad-group this device is on, and then writes pad-select
   register.
2. Mtk pad-select register just selects which MISO pin HW will
   receive data. For example, pad-select=1(select spi1 pins), HW just
   receives data from spi1 MISO, but it still send waveform to all 4
   group cs/clk/mosi. If cs pin in other groups is still spi mode,
   after spi1 is selected(by active cs pin), devices on other group
   will also be selected.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-27 13:33:42 +09:00
Leilk Liu
58a984c79a spi: mediatek: handle controller_data in mtk_spi_setup
controller_data is related with device, so move to master->setup
function.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-27 13:33:42 +09:00
Leilk Liu
79b5d3f24d spi: mediatek: remove mtk_spi_config
mtk_spi_config() and mtk_spi_prepare_message() both initialize
spi register, so remove mtk_spi_config() and init all register
in mtk_spi_prepare_message().

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-27 13:33:41 +09:00
Mark Brown
5132361cd9 Merge remote-tracking branches 'spi/fix/atmel', 'spi/fix/bcm2835', 'spi/fix/doc', 'spi/fix/mediatek', 'spi/fix/meson', 'spi/fix/mtk' and 'spi/fix/pxa2xx' into spi-linus 2015-09-22 09:48:34 -07:00
Javier Martinez Canillas
e26d15f735 spi: mediatek: fix wrong error return value on probe
Commit adcbcfea15 ("spi: mediatek: fix spi clock usage error")
added a new sel_clk but introduced bugs in the error paths since
the wrong struct clk pointers are passed to PTR_ERR().

Fixes: adcbcfea15 ("spi: mediatek: fix spi clock usage error")
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-16 20:45:11 +01:00
Leilk Liu
6583d2032d spi: mediatek: fix spi cs polarity error
Mediatek spi HW can't set cs inactive(keep cs high) directly.
Instead, it supplies pause mode to do it indirectly. If driver
unsets SPI_CMD_PAUSE_MODE in CMD_REG, it also needs to reset
internal state machine to let cs inactive at once.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-07 17:26:39 +01:00
Leilk Liu
adcbcfea15 spi: mediatek: fix spi clock usage error
spi clock manages flow:
  CLK_TOP_SYSPLL3_D2 ---> CLK_TOP_SPI_SEL ---> CLK_PERI_SPI0
     (source clock)           (clock mux)       (clock gate)
spi driver should choose source clock by clock mux, then enable
clock gate.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-31 15:26:50 +01:00
Leilk Liu
ca9f26a279 spi: mediatek: remove clk_disable_unprepare()
This patch removes clk_disable_unprepare() in mtk_spi_remove().
clk_disable_prepare/unprepare must be balance, spi-clk is disabled
in mtk_spi_probe, so not needs to disable again.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-31 15:26:50 +01:00
Leilk Liu
152933244a spi: mediatek: fix SPI_CMD_PAUSE_IE macro error
enable pause interrupt should use SPI_CMD_PAUSE_IE MACRO,
so fix it.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 20:31:00 +01:00
Leilk Liu
2ce0acf567 spi: mediatek: replace *_time name
This patch replaces *_time name in mtk_spi_prepare_transfer().

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-25 18:48:23 +01:00
Leilk Liu
13da5a0b72 spi: mediatek: add PM clk_prepare_enable fail flow
This patch adds PM clk_prepare_enable fail flow.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-25 18:48:23 +01:00
Leilk Liu
50f8fec216 spi: mediatek: replace int with u32, delete TAB and define MTK_SPI_PAUSE_INT_STATUS marco
this patch replaces int with u32, deletes TAB, and defines
MTK_SPI_PAUSE_INT_STATUS marco.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-25 18:48:23 +01:00
Leilk Liu
dd69a0a69c spi: mediatek: add linux/io.h include file
mediatek spi driver uses readl/writel, so add linux/io.h,
even so it's implicitly imported by spi/spi.h

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-25 18:48:23 +01:00
Leilk Liu
a71d6ea6d3 spi: mediatek: use BIT() to instead of SPI_CMD_*_OFFSET
This patch removes SPI_CMD_*_OFFSET defines, and uses the BIT(x)
defines instead.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-20 11:16:12 -07:00
Leilk Liu
af57937e86 spi: medaitek: revise quirks compatibility style
The quirks are true/false, so define these as bool.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-20 11:09:48 -07:00
Leilk Liu
44f636da4e spi: mediatek: fix spi incorrect endian usage
TX_ENDIAN/RX_ENDIAN bits define whether to reverse the endian
order of the data DMA from/to memory. The endian order should
keep the same with cpu endian.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-20 11:09:47 -07:00
Leilk Liu
c5e5cd28d7 spi: mediatek: remove redundant clock in prepare_hardware/unprepare_hardware
clock in prepare_hardware/unprepare_hardware is redundant
with pm_runtime, so remove them.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-19 10:24:18 -07:00
Leilk Liu
39ba928f8b spi: Mediatek: fixup cpu_to_le32 incorrect usage
writel() already does a cpu_to_le32 conversion, so
remove cpu_to_le32().

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-13 14:16:16 +01:00
Leilk Liu
7abc01b346 spi: mediatek: fix endian warnings
This patch fixes endian warnings detected by sparse:
- sparse: incorrect type in argument 1 (different base types)
	  expected unsigned int [unsigned] val
	  got restricted __le32 [usertype] <noident>
- sparse: incorrect type in argument 1 (different base types)
	  expected unsigned int [unsigned] val
	  got restricted __le32 [usertype] <noident>

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 17:11:29 +01:00
Axel Lin
e4001885ca spi: mt65xx: Fix module alias
Remove extra space and make the alias matches driver name.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-11 10:21:26 +01:00
kbuild test robot
4299aaaa5d spi: mediatek: mtk_spi_driver can be static
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-07 17:34:48 +01:00
Leilk Liu
a568231f46 spi: mediatek: Add spi bus for Mediatek MT8173
This patch adds basic spi bus for MT8173.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-07 14:35:13 +01:00