Pull x86 pti updates from Thomas Gleixner:
"This contains:
- a PTI bugfix to avoid setting reserved CR3 bits when PCID is
disabled. This seems to cause issues on a virtual machine at least
and is incorrect according to the AMD manual.
- a PTI bugfix which disables the perf BTS facility if PTI is
enabled. The BTS AUX buffer is not globally visible and causes the
CPU to fault when the mapping disappears on switching CR3 to user
space. A full fix which restores BTS on PTI is non trivial and will
be worked on.
- PTI bugfixes for EFI and trusted boot which make sure that the user
space visible page table entries have the NX bit cleared
- removal of dead code in the PTI pagetable setup functions
- add PTI documentation
- add a selftest for vsyscall to verify that the kernel actually
implements what it advertises.
- a sysfs interface to expose vulnerability and mitigation
information so there is a coherent way for users to retrieve the
status.
- the initial spectre_v2 mitigations, aka retpoline:
+ The necessary ASM thunk and compiler support
+ The ASM variants of retpoline and the conversion of affected ASM
code
+ Make LFENCE serializing on AMD so it can be used as speculation
trap
+ The RSB fill after vmexit
- initial objtool support for retpoline
As I said in the status mail this is the most of the set of patches
which should go into 4.15 except two straight forward patches still on
hold:
- the retpoline add on of LFENCE which waits for ACKs
- the RSB fill after context switch
Both should be ready to go early next week and with that we'll have
covered the major holes of spectre_v2 and go back to normality"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
x86,perf: Disable intel_bts when PTI
security/Kconfig: Correct the Documentation reference for PTI
x86/pti: Fix !PCID and sanitize defines
selftests/x86: Add test_vsyscall
x86/retpoline: Fill return stack buffer on vmexit
x86/retpoline/irq32: Convert assembler indirect jumps
x86/retpoline/checksum32: Convert assembler indirect jumps
x86/retpoline/xen: Convert Xen hypercall indirect jumps
x86/retpoline/hyperv: Convert assembler indirect jumps
x86/retpoline/ftrace: Convert ftrace assembler indirect jumps
x86/retpoline/entry: Convert entry assembler indirect jumps
x86/retpoline/crypto: Convert crypto assembler indirect jumps
x86/spectre: Add boot time option to select Spectre v2 mitigation
x86/retpoline: Add initial retpoline support
objtool: Allow alternatives to be ignored
objtool: Detect jumps to retpoline thunks
x86/pti: Make unpoison of pgd for trusted boot work for real
x86/alternatives: Fix optimize_nops() checking
sysfs/cpu: Fix typos in vulnerability documentation
x86/cpu/AMD: Use LFENCE_RDTSC in preference to MFENCE_RDTSC
...
The intended behaviour in apparmor profile matching is to flag a
conflict if two profiles match equally well. However, right now a
conflict is generated if another profile has the same match length even
if that profile doesn't actually match. Fix the logic so we only
generate a conflict if the profiles match.
Fixes: 844b8292b6 ("apparmor: ensure that undecidable profile attachments fail")
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Given a label with a profile stack of
A//&B or A//&C ...
A ptrace rule should be able to specify a generic trace pattern with
a rule like
ptrace trace A//&**,
however this is failing because while the correct label match routine
is called, it is being done post label decomposition so it is always
being done against a profile instead of the stacked label.
To fix this refactor the cross check to pass the full peer label in to
the label_match.
Fixes: 290f458a4f ("apparmor: allow ptrace checks to be finer grained than just capability")
Cc: Stable <stable@vger.kernel.org>
Reported-by: Matthew Garrett <mjg59@google.com>
Tested-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
-----BEGIN PGP SIGNATURE-----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=b5fz
-----END PGP SIGNATURE-----
Merge tag 'apparmor-pr-2018-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor fix from John Johansen:
"This fixes a regression when the kernel feature set is reported as
supporting mount and policy is pinned to a feature set that does not
support mount mediation"
* tag 'apparmor-pr-2018-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: fix regression in mount mediation when feature set is pinned
When the mount code was refactored for Labels it was not correctly
updated to check whether policy supported mediation of the mount
class. This causes a regression when the kernel feature set is
reported as supporting mount and policy is pinned to a feature set
that does not support mount mediation.
BugLink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=882697#41
Fixes: 2ea3ffb778 ("apparmor: add mount mediation")
Reported-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Pull x86 page table isolation fixes from Thomas Gleixner:
"A couple of urgent fixes for PTI:
- Fix a PTE mismatch between user and kernel visible mapping of the
cpu entry area (differs vs. the GLB bit) and causes a TLB mismatch
MCE on older AMD K8 machines
- Fix the misplaced CR3 switch in the SYSCALL compat entry code which
causes access to unmapped kernel memory resulting in double faults.
- Fix the section mismatch of the cpu_tss_rw percpu storage caused by
using a different mechanism for declaration and definition.
- Two fixes for dumpstack which help to decode entry stack issues
better
- Enable PTI by default in Kconfig. We should have done that earlier,
but it slipped through the cracks.
- Exclude AMD from the PTI enforcement. Not necessarily a fix, but if
AMD is so confident that they are not affected, then we should not
burden users with the overhead"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/process: Define cpu_tss_rw in same section as declaration
x86/pti: Switch to kernel CR3 at early in entry_SYSCALL_compat()
x86/dumpstack: Print registers for first stack frame
x86/dumpstack: Fix partial register dumps
x86/pti: Make sure the user/kernel PTEs match
x86/cpu, x86/pti: Do not enable PTI on AMD processors
x86/pti: Enable PTI by default
This really want's to be enabled by default. Users who know what they are
doing can disable it either in the config or on the kernel command line.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
If userspace attempted to set a "security.capability" xattr shorter than
4 bytes (e.g. 'setfattr -n security.capability -v x file'), then
cap_convert_nscap() read past the end of the buffer containing the xattr
value because it accessed the ->magic_etc field without verifying that
the xattr value is long enough to contain that field.
Fix it by validating the xattr value size first.
This bug was found using syzkaller with KASAN. The KASAN report was as
follows (cleaned up slightly):
BUG: KASAN: slab-out-of-bounds in cap_convert_nscap+0x514/0x630 security/commoncap.c:498
Read of size 4 at addr ffff88002d8741c0 by task syz-executor1/2852
CPU: 0 PID: 2852 Comm: syz-executor1 Not tainted 4.15.0-rc6-00200-gcc0aac99d977 #253
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0xe3/0x195 lib/dump_stack.c:53
print_address_description+0x73/0x260 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x235/0x350 mm/kasan/report.c:409
cap_convert_nscap+0x514/0x630 security/commoncap.c:498
setxattr+0x2bd/0x350 fs/xattr.c:446
path_setxattr+0x168/0x1b0 fs/xattr.c:472
SYSC_setxattr fs/xattr.c:487 [inline]
SyS_setxattr+0x36/0x50 fs/xattr.c:483
entry_SYSCALL_64_fastpath+0x18/0x85
Fixes: 8db6c34f1d ("Introduce v3 namespaced file capabilities")
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Pull x86 page table isolation updates from Thomas Gleixner:
"This is the final set of enabling page table isolation on x86:
- Infrastructure patches for handling the extra page tables.
- Patches which map the various bits and pieces which are required to
get in and out of user space into the user space visible page
tables.
- The required changes to have CR3 switching in the entry/exit code.
- Optimizations for the CR3 switching along with documentation how
the ASID/PCID mechanism works.
- Updates to dump pagetables to cover the user space page tables for
W+X scans and extra debugfs files to analyze both the kernel and
the user space visible page tables
The whole functionality is compile time controlled via a config switch
and can be turned on/off on the command line as well"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
x86/ldt: Make the LDT mapping RO
x86/mm/dump_pagetables: Allow dumping current pagetables
x86/mm/dump_pagetables: Check user space page table for WX pages
x86/mm/dump_pagetables: Add page table directory to the debugfs VFS hierarchy
x86/mm/pti: Add Kconfig
x86/dumpstack: Indicate in Oops whether PTI is configured and enabled
x86/mm: Clarify the whole ASID/kernel PCID/user PCID naming
x86/mm: Use INVPCID for __native_flush_tlb_single()
x86/mm: Optimize RESTORE_CR3
x86/mm: Use/Fix PCID to optimize user/kernel switches
x86/mm: Abstract switching CR3
x86/mm: Allow flushing for future ASID switches
x86/pti: Map the vsyscall page if needed
x86/pti: Put the LDT in its own PGD if PTI is on
x86/mm/64: Make a full PGD-entry size hole in the memory map
x86/events/intel/ds: Map debug buffers in cpu_entry_area
x86/cpu_entry_area: Add debugstore entries to cpu_entry_area
x86/mm/pti: Map ESPFIX into user space
x86/mm/pti: Share entry text PMD
x86/entry: Align entry text section to PMD boundary
...
Finally allow CONFIG_PAGE_TABLE_ISOLATION to be enabled.
PARAVIRT generally requires that the kernel not manage its own page tables.
It also means that the hypervisor and kernel must agree wholeheartedly
about what format the page tables are in and what they contain.
PAGE_TABLE_ISOLATION, unfortunately, changes the rules and they
can not be used together.
I've seen conflicting feedback from maintainers lately about whether they
want the Kconfig magic to go first or last in a patch series. It's going
last here because the partially-applied series leads to kernels that can
not boot in a bunch of cases. I did a run through the entire series with
CONFIG_PAGE_TABLE_ISOLATION=y to look for build errors, though.
[ tglx: Removed SMP and !PARAVIRT dependencies as they not longer exist ]
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Three sets of overlapping changes, two in the packet scheduler
and one in the meson-gxl PHY driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
keyctl_restrict_keyring() allows through a NULL restriction when the
"type" is non-NULL, which causes a NULL pointer dereference in
asymmetric_lookup_restriction() when it calls strcmp() on the
restriction string.
But no key types actually use a "NULL restriction" to mean anything, so
update keyctl_restrict_keyring() to reject it with EINVAL.
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 97d3aa0f31 ("KEYS: Add a lookup_restriction function for the asymmetric key type")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Variable key_ref is being assigned a value that is never read;
key_ref is being re-assigned a few statements later. Hence this
assignment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
When the request_key() syscall is not passed a destination keyring, it
links the requested key (if constructed) into the "default" request-key
keyring. This should require Write permission to the keyring. However,
there is actually no permission check.
This can be abused to add keys to any keyring to which only Search
permission is granted. This is because Search permission allows joining
the keyring. keyctl_set_reqkey_keyring(KEY_REQKEY_DEFL_SESSION_KEYRING)
then will set the default request-key keyring to the session keyring.
Then, request_key() can be used to add keys to the keyring.
Both negatively and positively instantiated keys can be added using this
method. Adding negative keys is trivial. Adding a positive key is a
bit trickier. It requires that either /sbin/request-key positively
instantiates the key, or that another thread adds the key to the process
keyring at just the right time, such that request_key() misses it
initially but then finds it in construct_alloc_key().
Fix this bug by checking for Write permission to the keyring in
construct_get_dest_keyring() when the default keyring is being used.
We don't do the permission check for non-default keyrings because that
was already done by the earlier call to lookup_user_key(). Also,
request_key_and_link() is currently passed a 'struct key *' rather than
a key_ref_t, so the "possessed" bit is unavailable.
We also don't do the permission check for the "requestor keyring", to
continue to support the use case described by commit 8bbf4976b5
("KEYS: Alter use of key instantiation link-to-keyring argument") where
/sbin/request-key recursively calls request_key() to add keys to the
original requestor's destination keyring. (I don't know of any users
who actually do that, though...)
Fixes: 3e30148c3d ("[PATCH] Keys: Make request-key create an authorisation key")
Cc: <stable@vger.kernel.org> # v2.6.13+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
In request_key_and_link(), in the case where the dest_keyring was
explicitly specified, there is no need to get another reference to
dest_keyring before calling key_link(), then drop it afterwards. This
is because by definition, we already have a reference to dest_keyring.
This change is useful because we'll be making
construct_get_dest_keyring() able to return an error code, and we don't
want to have to handle that error here for no reason.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Small overlapping change conflict ('net' changed a line,
'net-next' added a line right afterwards) in flexcan.c
Signed-off-by: David S. Miller <davem@davemloft.net>
Only IPSEC routes have a non-NULL dst->child pointer. And IPSEC
routes are identified by a non-NULL dst->xfrm pointer.
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a pure automated search-and-replace of the internal kernel
superblock flags.
The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.
Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.
The script to do this was:
# places to look in; re security/*: it generally should *not* be
# touched (that stuff parses mount(2) arguments directly), but
# there are two places where we really deal with superblock flags.
FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
include/linux/fs.h include/uapi/linux/bfs_fs.h \
security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
# the list of MS_... constants
SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
ACTIVE NOUSER"
SED_PROG=
for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done
# we want files that contain at least one of MS_...,
# with fs/namespace.c and fs/pnode.c excluded.
L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')
for f in $L; do sed -i $f $SED_PROG; done
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull timer updates from Thomas Gleixner:
- The final conversion of timer wheel timers to timer_setup().
A few manual conversions and a large coccinelle assisted sweep and
the removal of the old initialization mechanisms and the related
code.
- Remove the now unused VSYSCALL update code
- Fix permissions of /proc/timer_list. I still need to get rid of that
file completely
- Rename a misnomed clocksource function and remove a stale declaration
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
m68k/macboing: Fix missed timer callback assignment
treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts
timer: Remove redundant __setup_timer*() macros
timer: Pass function down to initialization routines
timer: Remove unused data arguments from macros
timer: Switch callback prototype to take struct timer_list * argument
timer: Pass timer_list pointer to callbacks unconditionally
Coccinelle: Remove setup_timer.cocci
timer: Remove setup_*timer() interface
timer: Remove init_timer() interface
treewide: setup_timer() -> timer_setup() (2 field)
treewide: setup_timer() -> timer_setup()
treewide: init_timer() -> setup_timer()
treewide: Switch DEFINE_TIMER callbacks to struct timer_list *
s390: cmm: Convert timers to use timer_setup()
lightnvm: Convert timers to use timer_setup()
drivers/net: cris: Convert timers to use timer_setup()
drm/vc4: Convert timers to use timer_setup()
block/laptop_mode: Convert timers to use timer_setup()
net/atm/mpc: Avoid open-coded assignment of timer callback function
...
Pull keys update from James Morris:
"There's nothing too controversial here:
- Doc fix for keyctl_read().
- time_t -> time64_t replacement.
- Set the module licence on things to prevent tainting"
* 'next-keys' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
pkcs7: Set the module licence to prevent tainting
security: keys: Replace time_t with time64_t for struct key_preparsed_payload
security: keys: Replace time_t/timespec with time64_t
KEYS: fix in-kernel documentation for keyctl_read()
This changes all DEFINE_TIMER() callbacks to use a struct timer_list
pointer instead of unsigned long. Since the data argument has already been
removed, none of these callbacks are using their argument currently, so
this renames the argument to "unused".
Done using the following semantic patch:
@match_define_timer@
declarer name DEFINE_TIMER;
identifier _timer, _callback;
@@
DEFINE_TIMER(_timer, _callback);
@change_callback depends on match_define_timer@
identifier match_define_timer._callback;
type _origtype;
identifier _origarg;
@@
void
-_callback(_origtype _origarg)
+_callback(struct timer_list *unused)
{ ... }
Signed-off-by: Kees Cook <keescook@chromium.org>
It used to be that unconfined would never attach. However that is not
the case anymore as some special profiles can be marked as unconfined,
that are not the namespaces unconfined profile, and may have an
attachment.
Fixes: f1bd904175 ("apparmor: add the base fns() for domain labels")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Profiles that have an undecidable overlap in their attachments are
being incorrectly handled. Instead of failing to attach the first one
encountered is being used.
eg.
profile A /** { .. }
profile B /*foo { .. }
have an unresolvable longest left attachment, they both have an exact
match on / and then have an overlapping expression that has no clear
winner.
Currently the winner will be the profile that is loaded first which
can result in non-deterministic behavior. Instead in this situation
the exec should fail.
Fixes: 898127c34e ("AppArmor: functions for domain transitions")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Fixes: d07881d2ed ("apparmor: move new_null_profile to after profile lookup fns()")
Reported-by: Seth Arnold <seth.arnold@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The boolean variable 'stop' is being set but never read. This
is a redundant variable and can be removed.
Cleans up clang warning: Value stored to 'stop' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Bool initializations should use true and false. Bool tests don't need
comparisons.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: John Johansen <john.johansen@canonical.com>
gcc-4.4 points out suspicious code in compute_mnt_perms, where
the aa_perms structure is only partially initialized before getting
returned:
security/apparmor/mount.c: In function 'compute_mnt_perms':
security/apparmor/mount.c:227: error: 'perms.prompt' is used uninitialized in this function
security/apparmor/mount.c:227: error: 'perms.hide' is used uninitialized in this function
security/apparmor/mount.c:227: error: 'perms.cond' is used uninitialized in this function
security/apparmor/mount.c:227: error: 'perms.complain' is used uninitialized in this function
security/apparmor/mount.c:227: error: 'perms.stop' is used uninitialized in this function
security/apparmor/mount.c:227: error: 'perms.deny' is used uninitialized in this function
Returning or assigning partially initialized structures is a bit tricky,
in particular it is explicitly allowed in c99 to assign a partially
initialized structure to another, as long as only members are read that
have been initialized earlier. Looking at what various compilers do here,
the version that produced the warning copied uninitialized stack data,
while newer versions (and also clang) either set the other members to
zero or don't update the parts of the return buffer that are not modified
in the temporary structure, but they never warn about this.
In case of apparmor, it seems better to be a little safer and always
initialize the aa_perms structure. Most users already do that, this
changes the remaining ones, including the one instance that I got the
warning for.
Fixes: fa488437d0f9 ("apparmor: add mount mediation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Seth Arnold <seth.arnold@canonical.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Trivial fix to spelling mistake in comment and also with text in
audit_resource call.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Commit b65a9cfc2c ("Untangling ima mess, part 2: deal with counters")
moved the call of ima_file_check() from may_open() to do_filp_open() at a
point where the file descriptor is already opened.
This breaks the assumption made by IMA that file descriptors being closed
belong to files whose access was granted by ima_file_check(). The
consequence is that security.ima and security.evm are updated with good
values, regardless of the current appraisal status.
For example, if a file does not have security.ima, IMA will create it after
opening the file for writing, even if access is denied. Access to the file
will be allowed afterwards.
Avoid this issue by checking the appraisal status before updating
security.ima.
Cc: stable@vger.kernel.org
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Summary of modules changes for the 4.15 merge window:
- Treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- Minor code cleanups
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=c8vb
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Summary of modules changes for the 4.15 merge window:
- treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- minor code cleanups"
* tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Do not paper over type mismatches in module_param_call()
treewide: Fix function prototypes for module_param_call()
module: Prepare to convert all module_param_call() prototypes
kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
-----BEGIN PGP SIGNATURE-----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=VtxX
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux updates from Paul Moore:
"Seven SELinux patches for v4.15, although five of the seven are small
build fixes and cleanups.
Of the remaining two patches, the only one worth really calling out is
Eric's fix for the SELinux filesystem xattr set/remove code; the other
patch simply converts the SELinux hash table implementation to use
kmem_cache.
Eric's setxattr/removexattr tweak converts SELinux back to calling the
commoncap implementations when the xattr is not SELinux related. The
immediate win is to fixup filesystem capabilities in user namespaces,
but it makes things a bit saner overall; more information in the
commit description"
* tag 'selinux-pr-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: remove extraneous initialization of slots_used and max_chain_len
selinux: remove redundant assignment to len
selinux: remove redundant assignment to str
selinux: fix build warning
selinux: fix build warning by removing the unused sid variable
selinux: Perform both commoncap and selinux xattr checks
selinux: Use kmem_cache for hashtab_node
Pull networking updates from David Miller:
"Highlights:
1) Maintain the TCP retransmit queue using an rbtree, with 1GB
windows at 100Gb this really has become necessary. From Eric
Dumazet.
2) Multi-program support for cgroup+bpf, from Alexei Starovoitov.
3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew
Lunn.
4) Add meter action support to openvswitch, from Andy Zhou.
5) Add a data meta pointer for BPF accessible packets, from Daniel
Borkmann.
6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet.
7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli.
8) More work to move the RTNL mutex down, from Florian Westphal.
9) Add 'bpftool' utility, to help with bpf program introspection.
From Jakub Kicinski.
10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper
Dangaard Brouer.
11) Support 'blocks' of transformations in the packet scheduler which
can span multiple network devices, from Jiri Pirko.
12) TC flower offload support in cxgb4, from Kumar Sanghvi.
13) Priority based stream scheduler for SCTP, from Marcelo Ricardo
Leitner.
14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg.
15) Add RED qdisc offloadability, and use it in mlxsw driver. From
Nogah Frankel.
16) eBPF based device controller for cgroup v2, from Roman Gushchin.
17) Add some fundamental tracepoints for TCP, from Song Liu.
18) Remove garbage collection from ipv6 route layer, this is a
significant accomplishment. From Wei Wang.
19) Add multicast route offload support to mlxsw, from Yotam Gigi"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits)
tcp: highest_sack fix
geneve: fix fill_info when link down
bpf: fix lockdep splat
net: cdc_ncm: GetNtbFormat endian fix
openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start
netem: remove unnecessary 64 bit modulus
netem: use 64 bit divide by rate
tcp: Namespace-ify sysctl_tcp_default_congestion_control
net: Protect iterations over net::fib_notifier_ops in fib_seq_sum()
ipv6: set all.accept_dad to 0 by default
uapi: fix linux/tls.h userspace compilation error
usbnet: ipheth: prevent TX queue timeouts when device not ready
vhost_net: conditionally enable tx polling
uapi: fix linux/rxrpc.h userspace compilation errors
net: stmmac: fix LPI transitioning for dwmac4
atm: horizon: Fix irq release error
net-sysfs: trigger netlink notification on ifalias change via sysfs
openvswitch: Using kfree_rcu() to simplify the code
openvswitch: Make local function ovs_nsh_key_attr_size() static
openvswitch: Fix return value check in ovs_meter_cmd_features()
...
The 'struct key_preparsed_payload' will use 'time_t' which we will
try to remove in the kernel, since 'time_t' is not year 2038 safe on
32bits systems.
Thus this patch replaces 'time_t' with 'time64_t' which is year 2038
safe on 32 bits system for 'struct key_preparsed_payload', moreover
we should use the 'TIME64_MAX' macro to initialize the 'time64_t'
type variable.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
The 'struct key' will use 'time_t' which we try to remove in the
kernel, since 'time_t' is not year 2038 safe on 32bit systems.
Also the 'struct keyring_search_context' will use 'timespec' type
to record current time, which is also not year 2038 safe on 32bit
systems.
Thus this patch replaces 'time_t' with 'time64_t' which is year 2038
safe for 'struct key', and replace 'timespec' with 'time64_t' for the
'struct keyring_search_context', since we only look at the the seconds
part of 'timespec' variable. Moreover we also change the codes where
using the 'time_t' and 'timespec', and we can get current time by
ktime_get_real_seconds() instead of current_kernel_time(), and use
'TIME64_MAX' macro to initialize the 'time64_t' type variable.
Especially in proc.c file, we have replaced 'unsigned long' and 'timespec'
type with 'u64' and 'time64_t' type to save the timeout value, which means
user will get one 'u64' type timeout value by issuing proc_keys_show()
function.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.15:
API:
- Disambiguate EBUSY when queueing crypto request by adding ENOSPC.
This change touches code outside the crypto API.
- Reset settings when empty string is written to rng_current.
Algorithms:
- Add OSCCA SM3 secure hash.
Drivers:
- Remove old mv_cesa driver (replaced by marvell/cesa).
- Enable rfc3686/ecb/cfb/ofb AES in crypto4xx.
- Add ccm/gcm AES in crypto4xx.
- Add support for BCM7278 in iproc-rng200.
- Add hash support on Exynos in s5p-sss.
- Fix fallback-induced error in vmx.
- Fix output IV in atmel-aes.
- Fix empty GCM hash in mediatek.
Others:
- Fix DoS potential in lib/mpi.
- Fix potential out-of-order issues with padata"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
lib/mpi: call cond_resched() from mpi_powm() loop
crypto: stm32/hash - Fix return issue on update
crypto: dh - Remove pointless checks for NULL 'p' and 'g'
crypto: qat - Clean up error handling in qat_dh_set_secret()
crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
crypto: dh - Don't permit 'p' to be 0
crypto: dh - Fix double free of ctx->p
hwrng: iproc-rng200 - Add support for BCM7278
dt-bindings: rng: Document BCM7278 RNG200 compatible
crypto: chcr - Replace _manual_ swap with swap macro
crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]
hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume
crypto: atmel - remove empty functions
crypto: ecdh - remove empty exit()
MAINTAINERS: update maintainer for qat
crypto: caam - remove unused param of ctx_map_to_sec4_sg()
crypto: caam - remove unneeded edesc zeroization
crypto: atmel-aes - Reset the controller before each use
crypto: atmel-aes - properly set IV after {en,de}crypt
hwrng: core - Reset user selected rng by writing "" to rng_current
...
Pull timer updates from Thomas Gleixner:
"Yet another big pile of changes:
- More year 2038 work from Arnd slowly reaching the point where we
need to think about the syscalls themself.
- A new timer function which allows to conditionally (re)arm a timer
only when it's either not running or the new expiry time is sooner
than the armed expiry time. This allows to use a single timer for
multiple timeout requirements w/o caring about the first expiry
time at the call site.
- A new NMI safe accessor to clock real time for the printk timestamp
work. Can be used by tracing, perf as well if required.
- A large number of timer setup conversions from Kees which got
collected here because either maintainers requested so or they
simply got ignored. As Kees pointed out already there are a few
trivial merge conflicts and some redundant commits which was
unavoidable due to the size of this conversion effort.
- Avoid a redundant iteration in the timer wheel softirq processing.
- Provide a mechanism to treat RTC implementations depending on their
hardware properties, i.e. don't inflict the write at the 0.5
seconds boundary which originates from the PC CMOS RTC to all RTCs.
No functional change as drivers need to be updated separately.
- The usual small updates to core code clocksource drivers. Nothing
really exciting"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
timers: Add a function to start/reduce a timer
pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
timer: Prepare to change all DEFINE_TIMER() callbacks
netfilter: ipvs: Convert timers to use timer_setup()
scsi: qla2xxx: Convert timers to use timer_setup()
block/aoe: discover_timer: Convert timers to use timer_setup()
ide: Convert timers to use timer_setup()
drbd: Convert timers to use timer_setup()
mailbox: Convert timers to use timer_setup()
crypto: Convert timers to use timer_setup()
drivers/pcmcia: omap1: Fix error in automated timer conversion
ARM: footbridge: Fix typo in timer conversion
drivers/sgi-xp: Convert timers to use timer_setup()
drivers/pcmcia: Convert timers to use timer_setup()
drivers/memstick: Convert timers to use timer_setup()
drivers/macintosh: Convert timers to use timer_setup()
hwrng/xgene-rng: Convert timers to use timer_setup()
auxdisplay: Convert timers to use timer_setup()
sparc/led: Convert timers to use timer_setup()
mips: ip22/32: Convert timers to use timer_setup()
...
Pull core locking updates from Ingo Molnar:
"The main changes in this cycle are:
- Another attempt at enabling cross-release lockdep dependency
tracking (automatically part of CONFIG_PROVE_LOCKING=y), this time
with better performance and fewer false positives. (Byungchul Park)
- Introduce lockdep_assert_irqs_enabled()/disabled() and convert
open-coded equivalents to lockdep variants. (Frederic Weisbecker)
- Add down_read_killable() and use it in the VFS's iterate_dir()
method. (Kirill Tkhai)
- Convert remaining uses of ACCESS_ONCE() to
READ_ONCE()/WRITE_ONCE(). Most of the conversion was Coccinelle
driven. (Mark Rutland, Paul E. McKenney)
- Get rid of lockless_dereference(), by strengthening Alpha atomics,
strengthening READ_ONCE() with smp_read_barrier_depends() and thus
being able to convert users of lockless_dereference() to
READ_ONCE(). (Will Deacon)
- Various micro-optimizations:
- better PV qspinlocks (Waiman Long),
- better x86 barriers (Michael S. Tsirkin)
- better x86 refcounts (Kees Cook)
- ... plus other fixes and enhancements. (Borislav Petkov, Juergen
Gross, Miguel Bernal Marin)"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
locking/x86: Use LOCK ADD for smp_mb() instead of MFENCE
rcu: Use lockdep to assert IRQs are disabled/enabled
netpoll: Use lockdep to assert IRQs are disabled/enabled
timers/posix-cpu-timers: Use lockdep to assert IRQs are disabled/enabled
sched/clock, sched/cputime: Use lockdep to assert IRQs are disabled/enabled
irq_work: Use lockdep to assert IRQs are disabled/enabled
irq/timings: Use lockdep to assert IRQs are disabled/enabled
perf/core: Use lockdep to assert IRQs are disabled/enabled
x86: Use lockdep to assert IRQs are disabled/enabled
smp/core: Use lockdep to assert IRQs are disabled/enabled
timers/hrtimer: Use lockdep to assert IRQs are disabled/enabled
timers/nohz: Use lockdep to assert IRQs are disabled/enabled
workqueue: Use lockdep to assert IRQs are disabled/enabled
irq/softirqs: Use lockdep to assert IRQs are disabled/enabled
locking/lockdep: Add IRQs disabled/enabled assertion APIs: lockdep_assert_irqs_enabled()/disabled()
locking/pvqspinlock: Implement hybrid PV queued/unfair locks
locking/rwlocks: Fix comments
x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized
block, locking/lockdep: Assign a lock_class per gendisk used for wait_for_completion()
workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes
...
Pull security subsystem integrity updates from James Morris:
"There is a mixture of bug fixes, code cleanup, preparatory code for
new functionality and new functionality.
Commit 26ddabfe96 ("evm: enable EVM when X509 certificate is
loaded") enabled EVM without loading a symmetric key, but was limited
to defining the x509 certificate pathname at build. Included in this
set of patches is the ability of enabling EVM, without loading the EVM
symmetric key, from userspace. New is the ability to prevent the
loading of an EVM symmetric key."
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
ima: Remove redundant conditional operator
ima: Fix bool initialization/comparison
ima: check signature enforcement against cmdline param instead of CONFIG
module: export module signature enforcement status
ima: fix hash algorithm initialization
EVM: Only complain about a missing HMAC key once
EVM: Allow userspace to signal an RSA key has been loaded
EVM: Include security.apparmor in EVM measurements
ima: call ima_file_free() prior to calling fasync
integrity: use kernel_read_file_from_path() to read x509 certs
ima: always measure and audit files in policy
ima: don't remove the securityfs policy file
vfs: fix mounting a filesystem with i_version
Pull general security subsystem updates from James Morris:
"TPM (from Jarkko):
- essential clean up for tpm_crb so that ARM64 and x86 versions do
not distract each other as much as before
- /dev/tpm0 rejects now too short writes (shorter buffer than
specified in the command header
- use DMA-safe buffer in tpm_tis_spi
- otherwise mostly minor fixes.
Smack:
- base support for overlafs
Capabilities:
- BPRM_FCAPS fixes, from Richard Guy Briggs:
The audit subsystem is adding a BPRM_FCAPS record when auditing
setuid application execution (SYSCALL execve). This is not expected
as it was supposed to be limited to when the file system actually
had capabilities in an extended attribute. It lists all
capabilities making the event really ugly to parse what is
happening. The PATH record correctly records the setuid bit and
owner. Suppress the BPRM_FCAPS record on set*id.
TOMOYO:
- Y2038 timestamping fixes"
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (28 commits)
MAINTAINERS: update the IMA, EVM, trusted-keys, encrypted-keys entries
Smack: Base support for overlayfs
MAINTAINERS: remove David Safford as maintainer for encrypted+trusted keys
tomoyo: fix timestamping for y2038
capabilities: audit log other surprising conditions
capabilities: fix logic for effective root or real root
capabilities: invert logic for clarity
capabilities: remove a layer of conditional logic
capabilities: move audit log decision to function
capabilities: use intuitive names for id changes
capabilities: use root_priveleged inline to clarify logic
capabilities: rename has_cap to has_fcap
capabilities: intuitive names for cap gain status
capabilities: factor out cap_bprm_set_creds privileged root
tpm, tpm_tis: use ARRAY_SIZE() to define TPM_HID_USR_IDX
tpm: fix duplicate inline declaration specifier
tpm: fix type of a local variables in tpm_tis_spi.c
tpm: fix type of a local variable in tpm2_map_command()
tpm: fix type of a local variable in tpm2_get_cc_attrs_tbl()
tpm-dev-common: Reject too short writes
...
Simple cases of overlapping changes in the packet scheduler.
Must easier to resolve this time.
Which probably means that I screwed it up somehow.
Signed-off-by: David S. Miller <davem@davemloft.net>
A non-zero value is converted to 1 when assigned to a bool variable, so the
conditional operator in is_ima_appraise_enabled is redundant.
The value of a comparison operator is either 1 or 0 so the conditional
operator in ima_inode_setxattr is redundant as well.
Confirmed that the patch is correct by comparing the object file from
before and after the patch. They are identical.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
