Add a negative test to test__checkevent_pmu_events() to get lots of
coverage of the negative case, ie. when the modifier is not specified.
Add a test of a single event, and of the group case.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1375795686-4226-2-git-send-email-michael@ellerman.id.au
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This commit adds support for a new modifier "D", which requests that the
event, or group of events, be pinned to the PMU.
The "p" modifier is already taken for precise, and "P" may be used in
future to mean "fully precise".
So we use "D", which stands for pinneD - and looks like a padlock, or if
you're using the ":D" syntax perf smiles at you.
This is an oft-requested feature from our HW folks, who want to be able
to run a large number of events, but also want 100% accurate results for
instructions per cycle.
Comparison of results with and without pinning:
$ perf stat -e '{cycles,instructions}:D' -e cycles,instructions,...
79,590,480,683 cycles # 0.000 GHz
166,123,716,524 instructions # 2.09 insns per cycle
# 0.11 stalled cycles per insn
79,352,134,463 cycles # 0.000 GHz [11.11%]
165,178,301,818 instructions # 2.08 insns per cycle
# 0.11 stalled cycles per insn [11.13%]
As you can see although perf does a very good job of scaling the values
in the non-pinned case, there is some small discrepancy.
The patch is fairly straight forward, the one detail is that we need to
make sure we only request pinning for the group leader when we have a
group.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1375795686-4226-1-git-send-email-michael@ellerman.id.au
[ Use perf_evsel__is_group_leader instead of open coded equivalent, as
suggested by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit 2b8bfa6bb8 ("perf tools: Centralize default columns init in
perf_hpp__init") moves initialization of common overhead column to
perf_hpp__init() but forgot about the gtk code.
So the gtk code added the same column to the list twice causing infinite
loop when iterating it by perf_hpp__for_each_format loop. When I run
perf report --gtk, I can see following messages indefinitely.
(perf:11687): Gtk-CRITICAL **: IA__gtk_main_quit: assertion 'main_loops != NULL' failed
perf: Segmentation fault
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1375766056-19377-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an option to analyze a specific VM within a data file. This allows
the collection of kvm events for all VMs and then analyze data for each
VM (or set of VMs) individually.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375753297-69645-6-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add max and min times for exit events.
v2: address Xiao's comment to use get_event function for pulling max and
min from stats struct similar to mean and count
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375753297-69645-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf kvm stat currently requires back to back record and report commands
to see stats. e.g,.
perf kvm stat record -p $pid -- sleep 1
perf kvm stat report
This is inconvenvient for on box monitoring of a VM. This patch
introduces a 'live' mode that in effect combines the record plus report
into one command. e.g., to monitor a single VM:
perf kvm stat live -p $pid
or all VMs:
perf kvm stat live
Same stats options for the record+report path work with the live mode.
Display rate defaults to 1 second and can be changed using the -d
option.
v4:
- address comments from Xiao -- verify_vcpu check should not look at
processors on line for the host, prune configurable options.
- set attr->{mmap,comm,task} to 0 - don't need task events so trim events
we have to deal with
- better control of time for queue event flushing to reduce frequency of
"Timestamp below last timeslice flush" failures.
v3:
updated to use existing tracepoint parsing code
v2:
removed ABSTIME arg from timerfd_settime as mentioned by Namhyung
only call perf_kvm__handle_stdin when poll returns activity.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375753297-69645-3-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Taking a lesson from perf-trace and bringing in control of event
processing to perf-kvm-stat-live: parse the sample to get access the
time leaving just the need to queue it to the ordered samples list. For
that the queue_event function needs to be exported.
Unexport perf_session__process_event.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375753297-69645-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The previous description: "Search previous string" is usually associated
with the 'N' following a '/string', the opposite of 'n', which is
'Search next string' in the direction established with '/' or '?'.
So change it to 'Search string backwards', to clarify that.
The 'N' hotkey remains to be implemented with the semantic described
above.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5lw5y15d7vv308xbpm8pqe4g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The /proc/kcore file has no symbols, so the call target name does not
display. Fix by looking up the symbol name if it is on the same map.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-14-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When kcore is used for annotation, symbols do not have correct sizes
because they come from kallsyms, that has only its start address, with
the end address being the next symbol's minus one.
That sometimes results in an extra nop being seen after the end of a
function. Remove it.
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-13-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the symbol name is displayed at the top when displaying symbol
annotation. Add to this the dso long name.
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-12-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Annotation with /proc/kcore is possible so the logic is adjusted to
allow it. The main difference is that /proc/kcore had no symbols so the
parsing logic needed a tweak to read jump offsets.
The other difference is that objdump cannot always read from kcore.
That seems to be a bug with objdump.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-11-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the "object code reading" test attempt to read from kcore.
The test uses objdump which struggles with kcore. i.e. doesn't always
work, sometimes takes a long time. The test has been made to work
around those issues.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The kallsyms maps now may map to kcore and the symbol values now may be
file offsets. For comparison with vmlinux the virtual memory address is
needed which is obtained by unmapping the symbol value.
The "vmlinux symtab matches kallsyms" is adjusted accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the absence of vmlinux, perf tools uses kallsyms for symbols. If the
user has access, now also map to /proc/kcore.
The dso data_type is now set to either DSO_BINARY_TYPE__KCORE or
DSO_BINARY_TYPE__GUEST_KCORE as approprite.
This patch breaks the "vmlinux symtab matches kallsyms" test. That is
fixed in a following patch.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The new "object code reading" test shows that it is not possible to read
object code from kernel modules. That is because the mappings do not
map to the dsos. This patch fixes that.
This involves identifying and flagging relocatable (ELF type ET_REL)
files (e.g. kernel modules) for symbol adjustment and updating
map__rip_2objdump() accordingly. The kmodule parameter of
dso__load_sym() is taken into use and the module map altered to map to
the dso.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The vmlinux maps now map to the dso and the symbol values are now file
offsets. For comparison with kallsyms the virtual memory address is
needed which is obtained by unmapping the symbol value.
The "vmlinux symtab matches kallsyms" is adjusted accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The new "object code reading" test shows that it is not possible to read
object code from vmlinux. That is because the mappings do not map to
the dso. This patch fixes that.
A side-effect of changing the kernel map is that the "reloc" offset must
be taken into account. As a result of that separate map functions for
relocation are no longer needed.
Also fixing up the maps to match the symbols no longer makes sense and
so is not done.
The vmlinux dso data_type is now set to either DSO_BINARY_TYPE__VMLINUX
or DSO_BINARY_TYPE__GUEST_VMLINUX as approprite, which enables the
correct file name to be determined by dso__binary_type_file().
This patch breaks the "vmlinux symtab matches kallsyms" test. That is
fixed in a following patch.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to use kernel maps to read object code, those maps must be
adjusted to map to the dso file offset. Because lazy-initialization is
used, that is not done until symbols are loaded. However the maps are
first used by thread__find_addr_map() before symbols are loaded. So
this patch changes thread__find_addr() to "load" kernel maps before
using them.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using the information in mmap events, perf tools can read object code
associated with sampled addresses. A test is added that compares bytes
read by perf with the same bytes read using objdump.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When removing duplicate symbols, prefer to remove syscall aliases
starting with SyS or compat_SyS.
A side-effect of that is that it results in slightly improved results
for the "vmlinux symtab matches kallsyms" test.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When interval mode is outputting to a pipe, each measurement should be
flushed individually, so that the reader sees it timely.
With a terminal each line is automatically flushed by stdio, but that is
disabled with non terminal output.
Simply fflush output after each time interval
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375490473-1503-5-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When measuring workloads the startup phase -- doing page faults, dynamic
linking, opening files -- is often very different from the rest of the
workload. Especially with smaller kernels and using counter
multiplexing this can give significant measurement errors.
Multiplexing assumes that the workload is mostly the same over longer
periods. But at startup there is typically some spike of activity which
is relatively short. If many groups are multiplexing the one group
seeing the spike, and which is then scaled up over the time to run all
groups, may see a significant error.
Also in general it's often not useful to measure the startup, because it
is so different from the rest.
One way around this is to use interval mode and discard the first
sample, but this can be awkward because interval mode doesn't support
intervals of less than 100ms, and also a useful interval is not
necessarily the same as a useful startup delay.
This patch adds a new --initial-delay / -D option to skip measuring for
the startup phase. The time can be specified in ms
Here's a simple example:
perf stat -e page-faults bash -c 'for i in $(seq 100000) ; do true ; done'
...
3,721 page-faults
...
If we just wait 20 ms the number of page faults is 1/3 less:
perf stat -D 20 -e page-faults bash -c 'for i in $(seq 100000) ; do true ; done'
...
2,823 page-faults
...
So we filtered out most of the startup noise from bash.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375490473-1503-4-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for enabling already set up counters by using an
ioctl. I share some code with the filter setup.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375490473-1503-3-git-send-email-andi@firstfloor.org
[ Fixed up 'err' variable indentation ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Minor cleanup.
The dummy execve to pre-resolve the PLT is obsolete since
"enable_on_execve" was added. The counters are only
running after the execve anyways. So just remove it.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375490473-1503-2-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Needed by kvm live command. Make record_args a local while we are
messing with the args.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375473947-64285-5-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allows kvm live mode to reuse the event processing and ordered samples
processing used by the perf-report path.
v2: removed flush_sample_queue as noticed by Jiri
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375473947-64285-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Need an initialization function to set min to -1 to
differentiate from an actual min of 0.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375473947-64285-3-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For use with kvm-live mode.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375473947-64285-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The parse_nsec_time() function is for parsing a string of time into
64-bit nsec value. It's a preparation of time filtering in some of perf
commands.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: David Ahern <dsahern@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1370310629-9642-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is an errno, so print an error string.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zt68gijvvoe8gd7kmclo43si@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On Fedora 18, with gcc 4.6.4 compile fails with:
arch/x86/util/tsc.c: In function ‘perf_time_to_tsc’:
arch/x86/util/tsc.c:13:6: error: declaration of ‘time’ shadows a global declaration [-Werror=shadow]
cc1: all warnings being treated as errors
make: *** [/tmp/junk/arch/x86/util/tsc.o] Error 1
make: *** Waiting for unfinished jobs....
Fix by renaming the local variable.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/1374848843-43127-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Symbol offset is one of the fields that can be requested in perf-script.
Currently you do not get that data when requested. e.g.,
perf script -f comm,tid,pid,time,cpu,sym,symoff,ip
...
gcc 6201/6201 [006] 762250.617897:
ffffffff81090d95 update_curr
ffffffff810911b8 dequeue_entity
ffffffff81091825 dequeue_task_fair
ffffffff81087163 dequeue_task
ffffffff81087c03 deactivate_task
...
With this patch you get the offset:
...
gcc 6201/6201 [006] 762250.617897:
ffffffff81090d95 update_curr+0x1c5
ffffffff810911b8 dequeue_entity+0x28
ffffffff81091825 dequeue_task_fair+0x45
ffffffff81087163 dequeue_task+0x93
ffffffff81087c03 deactivate_task+0x23
...
Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1375024474-45726-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding 2 more tests to the automated parse events suite for following
event config:
'{cycles,cache-misses,branch-misses}:S'
'{instructions,branch-misses}:Su'
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-tmcy0ir7i8id2t54qg5ifbio@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding test to validate perf_event_attr data for command:
'record -e '{cycles,cache-misses}:S'
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-9eppxvhkly6gse5ximudckrp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding 'S' event/group modifier to specify that the event value/s are
read by PERF_SAMPLE_READ sample type processing, instead of the period
value offered by lower layers.
There's additional behaviour change for 'S' modifier being specified on
event group:
Currently all the events within a group makes samples. If user now
specifies 'S' within group modifier, only the leader will trigger
samples. The rest of events in the group will have sampling disabled.
And same as for single events, values of all events within the group
(including leader) are read by PERF_SAMPLE_READ sample type processing.
Following example will create event group with cycles and cache-misses
events, setting the cycles as group leader and the only event to
actually sample. Both cycles and cache-misses event period values are
read by PERF_SAMPLE_READ sample type processing with PERF_FORMAT_GROUP
read format.
Example:
$ perf record -e '{cycles,cache-misses}:S' ls
...
$ perf report --group --show-total-period --stdio
...
# Samples: 36 of event 'anon group { cycles, cache-misses }'
# Event count (approx.): 12585593
#
# Overhead Period Command Shared Object Symbol
# .............. .............. ....... ................. ..........................
#
19.92% 1.20% 2505936 31 ls [kernel.kallsyms] [k] mark_held_locks
13.74% 0.47% 1729327 12 ls [kernel.kallsyms] [k] sched_clock_local
13.64% 23.72% 1716147 612 ls ld-2.14.90.so [.] check_match.10805
13.12% 23.22% 1650778 599 ls libc-2.14.90.so [.] _nl_intern_locale_data
11.24% 29.19% 1414554 753 ls [kernel.kallsyms] [k] sched_clock_cpu
8.50% 0.35% 1070150 9 ls [kernel.kallsyms] [k] check_chain_key
...
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-iyoinu3axi11mymwnh2b7fxj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For sample with sample type PERF_SAMPLE_READ the period value is stored
in the 'struct sample_read'.
Moreover if the read format has PERF_FORMAT_GROUP, the 'struct
sample_read' contains period values for all events in the group (for
which the sample's event is a leader).
We deliver separated samples for all the values contained within the
'struct sample_read'.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-6mdm5xkrm6kypouh1c33cyys@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This will be helpful for PERF_FORMAT_GROUP samples where we need to
store ID related period value for each event.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-twmlgsbyim97p7cyohjwb1df@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to fail the event ID retrieval in case both following conditions
are true:
- we are on kernel with no PERF_EVENT_IOC_ID support
- PERF_FORMAT_GROUP read format is set
The PERF_FORMAT_GROUP read format bit is the killer for retrieving event
ID out of the read syscall, because we have no guarantee of the event
placement within leader kernel sibling list.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-e93pgyj20rqx48qzw10vj4r4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding support to parse out the PERF_SAMPLE_READ sample bits. The code
contains both single and group format specification.
This code parse out and prepare PERF_SAMPLE_READ data into the
perf_sample struct. It will be used for group leader sampling feature
comming in shortly.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-0tgdoln5rwk3wocshb442cl3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changing the way we retrieve the event ID. Instead of parsing out
the ID out of the read data, using the PERF_EVENT_IOC_ID ioctl.
Keeping the old way in place to support kernels without
PERF_EVENT_IOC_ID ioctl support.
This will be useful for retrieving the event ID for events
with PERF_FORMAT_GROUP read format set, where it's impossible
to get correct event id out of the read call data.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-psgb4n7kte8e6tfenbe7nj2h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's possible some of the counters in the group could be
disabled when sampling member of the event group is reading
the rest via PERF_SAMPLE_READ sample type processing. Disabled
counters could then produce wrong numbers.
Fixing that by reading only enabled counters for PERF_SAMPLE_READ
sample type processing.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-wwkjb0bbcuslnz0klrmqi26r@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The only way to get the event ID is by reading the event fd,
followed by parsing the ID value out of the returned data.
While this is ok for current read format used by perf tool,
it is not ok when we use PERF_FORMAT_GROUP format.
With this format the data are returned for the whole group
and there's no way to find out what ID belongs to our fd
(if we are not group leader event).
Adding a simple ioctl that returns event primary ID for given fd.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-v1bn5cto707jn0bon34afqr1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A perf event can be used without forcing the tick to
stay alive if it doesn't use a frequency but a sample
period and if it doesn't throttle (raise storm of events).
Since the lockup detector neither use a perf event frequency
nor should ever throttle due to its high period, it can now
run concurrently with the full dynticks feature.
So remove the hack that disabled the watchdog.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Anish Singh <anish198519851985@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374539466-4799-9-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently the full dynticks subsystem keep the
tick alive as long as there are perf events running.
This prevents the tick from being stopped as long as features
such that the lockup detectors are running. As a temporary fix,
the lockup detector is disabled by default when full dynticks
is built but this is not a long term viable solution.
To fix this, only keep the tick alive when an event configured
with a frequency rather than a period is running on the CPU,
or when an event throttles on the CPU.
These are the only purposes of the perf tick, especially now that
the rotation of flexible events is handled from a seperate hrtimer.
The tick can be shutdown the rest of the time.
Original-patch-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374539466-4799-8-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is going to be used by the full dynticks subsystem
as a finer-grained information to know when to keep and
when to stop the tick.
Original-patch-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374539466-4799-7-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When an event is migrated, move the event per-cpu
accounting accordingly so that branch stack and cgroup
events work correctly on the new CPU.
Original-patch-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374539466-4799-6-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This way we can use the per-cpu handling seperately.
This is going to be used by to fix the event migration
code accounting.
Original-patch-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374539466-4799-5-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
