Found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:506 construct() warn:
possible memory leak of 'dc_ctx'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:506 construct() warn:
possible memory leak of 'dc_vbios'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:506 construct() warn:
possible memory leak of 'dcn_ip'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:506 construct() warn:
possible memory leak of 'dcn_soc'
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pipe_ctx->stream and pipe_ctx->plane_state are never NULL
Found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2111
set_default_colors() error: we previously assumed 'pipe_ctx->stream'
could be null (see line 2101)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
plane_res.mi (memory interface) can never be NULL for DCE110
Found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2881
dce110_apply_ctx_for_surface() error: we previously assumed
'pipe_ctx->plane_res.mi' could be null (see line 2873)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
NULL check issue found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:1976
dc_link_setup_psr() warn: variable dereferenced before check 'link' (see
line 1970)
We don't use these functions so might as well remove them.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Integrating MPC pseudocode to support new blending cases
with secondary MPCC list.
This includes a design change to MPC data structures and
interfaces.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
in eDP+ HDMI/DP clone or extended configuration, audio inst changed from inst 1 to inst0.
No failure related this though, just playback device endpoint inst changed.
Also remove one addition register read.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dm_log_to_buffer logs unconditionally, so calling it directly resulted
in the main message being logged even when the event type isn't enabled
in the event mask.
To fix this, use the new dm_logger_append_va API.
Fixes spurious messages like
[drm] {1920x1200, 2080x1235@154000Khz}
in dmesg when a mode is set.
v2:
* Use new dm_logger_append_va API, fixes incorrect va_list usage in v1
* Just use and decrease entry.buf_offset to get rid of the trailing
newline
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as dm_logger_append, except it takes a va_list instead of a
variable number of arguments. dm_logger_append is now a minimal wrapper
around dm_logger_append_va.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently the atomic check code uses legacy_cursor_update
to differnetiate if the cursor plane is being requested by
the user, which is not required as we shall be updating
plane only if modeset is requested/required.
Have tested cursor plane and underlay get updated seamlessly,
without any lag or frame drops.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On S3 resume, we do not reconstruct OPP, but we do need to
reinitialize some of its values to the default ones.
Therefore, move those lines out of the OPP constructor and
into init_hw.
Also reset the hubp power gated flag, since nothing is
power gated at init_hw.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Doing bandwidth validation implies that this is a full update. Set the
flag inside the function in case whatever is calling
dcn_validate_bandwidth doesn't set it.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sequence of front-end > back-end > front-end programming will
program the front-end more than once. Add a mode_changed flag, and use
it to determine whether the front-end should be programmed before, or
after back-end.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With the optimized DCN10 frontend programming code, things are
programmed only when requested. For now, trigger a full update on all
plane changes.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There was an error in translation of mode support check.
"N/A" is a failure condition while "" was a special case.
This change will differentiate between the two by using a
define.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dcn10_translate_regamma_to_hw_format costs 750us to run, it cannot be
called within isr, check update flag before calling, only do it for
full update.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move update_plane_addr to apply_ctx_for_surface, address update will
just be called once, not twice for updat type is full and medium.
This will reduce some reg access and duration time.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Line continuations with excess spacing causes unexpected output.
Miscellanea:
o Added missing '\n' to a few of the coalesced pr_<level> formats
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make use of the swap macro instead of _manually_ swapping values
and remove unnecessary variable swap.
This makes the code easier to read and maintain.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make use of the swap macro instead of _manually_ swapping values
and remove unnecessary variable temp.
This makes the code easier to read and maintain.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
