Commit Graph

11 Commits

Author SHA1 Message Date
Ido Schimmel
289fb44df4 selftests: forwarding: Fix test for different devices
When running the test on the Spectrum ASIC the generated packets are
counted on the ingress filter and injected back to the pipeline because
of the 'pass' action. The router block then drops the packets due to
checksum error, as the test generates packets with zero checksum.

When running the test on an emulator that is not as strict about
checksum errors the test fails since packets are counted twice. Once by
the emulated ASIC on its ingress filter and again by the kernel as the
emulator does not perform checksum validation and allows the packets to
be trapped by a matching host route.

Fix this by changing the action to 'drop', which will prevent the packet
from continuing further in the pipeline to the router block.

For veth pairs this change is essentially a NOP given packets are only
processed once (by the kernel).

Fixes: a0b61f3d8e ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08 16:53:54 -05:00
Ido Schimmel
c39c56a8c8 selftests: forwarding: vxlan_bridge_1d: Add learning test
Add a test which checks that the VxLAN driver can learn FDB entries and
that these entries are correctly deleted and aged-out.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21 17:10:31 -08:00
Petr Machata
a0b61f3d8e selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test
Test that when decapsulating from VXLAN, the values of inner and outer
TOS are handled appropriately. Because VXLAN driver on its own won't
produce the arbitrary TOS combinations necessary to test this feature,
simply open-code a single ICMP packet and have mausezahn assemble it.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:44 -08:00
Petr Machata
1e5abfb3ff selftests: forwarding: vxlan_bridge_1d: Add an ECN encap test
Test that ECN bits in the VXLAN envelope are correctly deduced from the
overlay packet.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:44 -08:00
Petr Machata
d417ecf533 selftests: forwarding: vxlan_bridge_1d: Add a TOS test
Test that TOS is inherited from the tunneled packet into the envelope as
configured at the VXLAN device.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:44 -08:00
Petr Machata
b3a7ee74ee selftests: forwarding: vxlan_bridge_1d: Add a TTL test
This tests whether TTL of VXLAN envelope packets is properly set based
on the device configuration.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:44 -08:00
Petr Machata
50a02b0825 selftests: forwarding: vxlan_bridge_1d: Reconfigure & rerun tests
The ordering of the topology creation can have impact on whether a
driver is successful in offloading VXLAN. Therefore add a pseudo-test
that reshuffles bits of the topology, and then reruns the same suite of
tests again to make sure that the new setup is supported as well.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:44 -08:00
Petr Machata
bfd1e27038 selftests: forwarding: vxlan_bridge_1d: Add unicast test
Test that when sending traffic to a learned MAC address, the traffic is
forwarded accurately only to the right endpoint.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:44 -08:00
Petr Machata
edaa117efe selftests: forwarding: vxlan_bridge_1d: Add flood test
Test that when sending traffic to an unlearned MAC address, the traffic
is flooded to both remote VXLAN endpoints.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:44 -08:00
Petr Machata
5852fd07c4 selftests: forwarding: vxlan_bridge_1d: Add ping test
Test end-to-end reachability between local and remote endpoints.

Note that because learning is disabled on the VXLAN device, the ICMP
requests will end up being flooded to all remotes.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:44 -08:00
Petr Machata
fd64d5a2e3 selftests: forwarding: Add a skeleton of vxlan_bridge_1d
This skeleton sets up a topology with three VXLAN endpoints: one
"local", possibly offloaded, and two "remote", formed using veth pairs
and likely purely software bridges. The "local" endpoint is connected to
host systems by a VLAN-unaware bridge.

Since VXLAN tunnels must be unique per namespace, each of the "remote"
endpoints is in its own namespace. H3 forms the bridge between the three
domains.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19 17:59:43 -08:00