For a protocol and command compatibility we have a helper that hasn't
been updated for v3 yet. We use it for verity so update where necessary.
Fixes: 38622010a6 ("btrfs: send: add support for fs-verity")
Signed-off-by: David Sterba <dsterba@suse.com>
We haven't finalized send stream v3 yet, so gate the send stream version
behind CONFIG_BTRFS_DEBUG as we want some way to test it.
The original verity send did not check the protocol version, so add that
actual protection as well.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
When looking the stored result for a cached path node, if the stored
result is valid and has a value of true, we must update all the nodes for
all levels below it with a result of true as well. This is necessary when
moving from one leaf in the fs tree to the next one, as well as when
moving from a node at any level to the next node at the same level.
Currently this logic is missing as it was somehow forgotten by a recent
patch with the subject: "btrfs: speedup checking for extent sharedness
during fiemap".
This adds the missing logic, which is the counter part to what we do
when adding a shared node to the cache at store_backref_shared_cache().
Fixes: 12a824dc67 ("btrfs: speedup checking for extent sharedness during fiemap")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
syzbot is reporting uninit-value in btrfs_clean_tree_block() [1], for
commit bc877d285c ("btrfs: Deduplicate extent_buffer init code")
missed that btrfs_set_header_generation() in btrfs_init_new_buffer() must
not be moved to after clean_tree_block() because clean_tree_block() is
calling btrfs_header_generation() since commit 55c69072d6 ("Btrfs:
Fix extent_buffer usage when nodesize != leafsize").
Since memzero_extent_buffer() will reset "struct btrfs_header" part, we
can't move btrfs_set_header_generation() to before memzero_extent_buffer().
Just re-add btrfs_set_header_generation() before btrfs_clean_tree_block().
Link: https://syzkaller.appspot.com/bug?extid=fba8e2116a12609b6c59 [1]
Reported-by: syzbot <syzbot+fba8e2116a12609b6c59@syzkaller.appspotmail.com>
Fixes: bc877d285c ("btrfs: Deduplicate extent_buffer init code")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently when dropping extent maps for a file range, through
btrfs_drop_extent_map_range(), we do the following non-optimal things:
1) We lookup for extent maps one by one, always starting the search from
the root of the extent map tree. This is not efficient if we have
multiple extent maps in the range;
2) We check on every iteration if we have the 'split' and 'split2' spare
extent maps in case we need to split an extent map that intersects our
range but also crosses its boundaries (to the left, to the right or
both cases). If our target range is for example:
[2M, 8M)
And we have 3 extents maps in the range:
[1M, 3M) [3M, 6M) [6M, 10M[
The on the first iteration we allocate two extent maps for 'split' and
'split2', and use the 'split' to split the first extent map, so after
the split we set 'split' to 'split2' and then set 'split2' to NULL.
On the second iteration, we don't need to split the second extent map,
but because 'split2' is now NULL, we allocate a new extent map for
'split2'.
On the third iteration we need to split the third extent map, so we
use the extent map pointed by 'split'.
So we ended up allocating 3 extent maps for splitting, but all we
needed was 2 extent maps. We never need to allocate more than 2,
because extent maps that need to be split are always the first one
and the last one in the target range.
Improve on this by:
1) Using rb_next() to move on to the next extent map. This results in
iterating over less nodes of the tree and it does not require comparing
the ranges of nodes to our start/end offset;
2) Allocate the 2 extent maps for splitting before entering the loop and
never allocate more than 2. In practice it's very rare to have the
combination of both extent map allocations fail, since we have a
dedicated slab for extent maps, and also have the need to split two
extent maps.
This patch is part of a patchset comprised of the following patches:
btrfs: fix missed extent on fsync after dropping extent maps
btrfs: move btrfs_drop_extent_cache() to extent_map.c
btrfs: use extent_map_end() at btrfs_drop_extent_map_range()
btrfs: use cond_resched_rwlock_write() during inode eviction
btrfs: move open coded extent map tree deletion out of inode eviction
btrfs: add helper to replace extent map range with a new extent map
btrfs: remove the refcount warning/check at free_extent_map()
btrfs: remove unnecessary extent map initializations
btrfs: assert tree is locked when clearing extent map from logging
btrfs: remove unnecessary NULL pointer checks when searching extent maps
btrfs: remove unnecessary next extent map search
btrfs: avoid pointless extent map tree search when flushing delalloc
btrfs: drop extent map range more efficiently
And the following fio test was done before and after applying the whole
patchset, on a non-debug kernel (Debian's default kernel config) on a 12
cores Intel box with 64G of ram:
$ cat test.sh
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS="-R free-space-tree -O no-holes"
cat <<EOF > /tmp/fio-job.ini
[writers]
rw=randwrite
fsync=8
fallocate=none
group_reporting=1
direct=0
bssplit=4k/20:8k/20:16k/20:32k/10:64k/10:128k/5:256k/5:512k/5:1m/5
ioengine=psync
filesize=2G
runtime=300
time_based
directory=$MNT
numjobs=8
thread
EOF
echo performance | \
tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
echo
echo "Using config:"
echo
cat /tmp/fio-job.ini
echo
umount $MNT &> /dev/null
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
fio /tmp/fio-job.ini
umount $MNT
Result before applying the patchset:
WRITE: bw=197MiB/s (206MB/s), 197MiB/s-197MiB/s (206MB/s-206MB/s), io=57.7GiB (61.9GB), run=300188-300188msec
Result after applying the patchset:
WRITE: bw=203MiB/s (213MB/s), 203MiB/s-203MiB/s (213MB/s-213MB/s), io=59.5GiB (63.9GB), run=300019-300019msec
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When flushing delalloc, in COW mode at cow_file_range(), before entering
the loop that allocates extents and creates ordered extents, we do a call
to btrfs_drop_extent_map_range() for the whole range. This is pointless
because in the loop we call create_io_em(), which will also call
btrfs_drop_extent_map_range() before inserting the new extent map.
So remove that call at cow_file_range() not only because it is not needed,
but also because it will make the btrfs_drop_extent_map_range() calls made
from create_io_em() waste time searching the extent map tree, and that
tree can be large for files with many extents. It also makes us waste time
at btrfs_drop_extent_map_range() allocating and freeing the split extent
maps for nothing.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At __tree_search(), and its single caller __lookup_extent_mapping(), there
is no point in finding the next extent map that starts after the search
offset if we were able to find the previous extent map that ends before
our search offset, because __lookup_extent_mapping() ignores the next
acceptable extent map if we were able to find the previous one.
So just return immediately if we were able to find the previous extent
map, therefore avoiding wasting time iterating the tree looking for the
next extent map which will not be used by __lookup_extent_mapping().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The previous and next pointer arguments passed to __tree_search() are
never NULL as the only caller of this function, __lookup_extent_mapping(),
always passes the address of two on stack pointers. So remove the NULL
checks and add assertions to verify the pointers.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When calling clear_em_logging() we should have a write lock on the extent
map tree, as we will try to merge the extent map with the previous and
next ones in the tree. So assert that we have a write lock.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When allocating an extent map, we use kmem_cache_zalloc() which guarantees
the returned memory is initialized to zeroes, therefore it's pointless
to initialize the generation and flags of the extent map to zero again.
Remove those initializations, as they are pointless and slightly increase
the object text size.
Before removing them:
$ size fs/btrfs/extent_map.o
text data bss dec hex filename
9241 274 24 9539 2543 fs/btrfs/extent_map.o
After removing them:
$ size fs/btrfs/extent_map.o
text data bss dec hex filename
9209 274 24 9507 2523 fs/btrfs/extent_map.o
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At free_extent_map(), it's pointless to have a WARN_ON() to check if the
refcount of the extent map is zero. Such check is already done by the
refcount_t module and refcount_dec_and_test(), which loudly complains if
we try to decrement a reference count that is currently 0.
The WARN_ON() dates back to the time when used a regular atomic_t type
for the reference counter, before we switched to the refcount_t type.
The main goal of the refcount_t type/module is precisely to catch such
types of bugs and loudly complain if they happen.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several places that need to drop all the extent maps in a given
file range and then add a new extent map for that range. Currently they
call btrfs_drop_extent_map_range() to delete all extent maps in the range
and then keep trying to add the new extent map in a loop that keeps
retrying while the insertion of the new extent map fails with -EEXIST.
So instead of repeating this logic, add a helper to extent_map.c that
does these steps and name it btrfs_replace_extent_map_range(). Also add
a comment about why the retry loop is necessary.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move the loop that removes all the extent maps from the inode's extent
map tree during inode eviction out of inode.c and into extent_map.c, to
btrfs_drop_extent_map_range(). Anything manipulating extent maps or the
extent map tree should be in extent_map.c.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At evict_inode_truncate_pages(), instead of manually checking if
rescheduling is needed, then unlock the extent map tree, reschedule and
then write lock again the tree, use the helper cond_resched_rwlock_write()
which does all that.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of open coding the end offset calculation of an extent map, use
the helper extent_map_end() and cache its result in a local variable,
since it's used several times.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_drop_extent_cache() doesn't really belong at file.c
because what it does is drop a range of extent maps for a file range.
It directly allocates and manipulates extent maps, by dropping,
splitting and replacing them in an extent map tree, so it should be
located at extent_map.c, where all manipulations of an extent map tree
and its extent maps are supposed to be done.
So move it out of file.c and into extent_map.c. Additionally do the
following changes:
1) Rename it into btrfs_drop_extent_map_range(), as this makes it more
clear about what it does. The term "cache" is a bit confusing as it's
not widely used, "extent maps" or "extent mapping" is much more common;
2) Change its 'skip_pinned' argument from int to bool;
3) Turn several of its local variables from int to bool, since they are
used as booleans;
4) Move the declaration of some variables out of the function's main
scope and into the scopes where they are used;
5) Remove pointless assignment of false to 'modified' early in the while
loop, as later that variable is set and it's not used before that
second assignment;
6) Remove checks for NULL before calling free_extent_map().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When dropping extent maps for a range, through btrfs_drop_extent_cache(),
if we find an extent map that starts before our target range and/or ends
before the target range, and we are not able to allocate extent maps for
splitting that extent map, then we don't fail and simply remove the entire
extent map from the inode's extent map tree.
This is generally fine, because in case anyone needs to access the extent
map, it can just load it again later from the respective file extent
item(s) in the subvolume btree. However, if that extent map is new and is
in the list of modified extents, then a fast fsync will miss the parts of
the extent that were outside our range (that needed to be split),
therefore not logging them. Fix that by marking the inode for a full
fsync. This issue was introduced after removing BUG_ON()s triggered when
the split extent map allocations failed, done by commit 7014cdb493
("Btrfs: btrfs_drop_extent_cache should never fail"), back in 2012, and
the fast fsync path already existed but was very recent.
Also, in the case where we could allocate extent maps for the split
operations but then fail to add a split extent map to the tree, mark the
inode for a full fsync as well. This is not supposed to ever fail, and we
assert that, but in case assertions are disabled (CONFIG_BTRFS_ASSERT is
not set), it's the correct thing to do to make sure a fast fsync will not
miss a new extent.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function no longer exists, was removed in 3c4276936f ("Btrfs: fix
btrfs_write_inode vs delayed iput deadlock").
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable nowait async buffered writes in btrfs_do_write_iter() and
btrfs_file_open().
In this version encoded buffered writes have the optimization not
enabled. Encoded writes are enabled by using an ioctl. io_uring
currently does not support ioctls. This might be enabled in the future.
Performance results:
For fio the following results have been obtained with a queue depth of
1 and 4k block size (runtime 600 secs):
sequential writes:
without patch with patch libaio psync
iops: 55k 134k 117K 148K
bw: 221MB/s 538MB/s 469MB/s 592MB/s
clat: 15286ns 82ns 994ns 6340ns
For an io depth of 1, the new patch improves throughput by over two
times (compared to the existing behavior, where buffered writes are
processed by an io-worker process) and also the latency is considerably
reduced. To achieve the same or better performance with the existing
code an io depth of 4 is required. Increasing the iodepth further does
not lead to improvements.
The tests have been run like this:
./fio --name=seq-writers --ioengine=psync --iodepth=1 --rw=write \
--bs=4k --direct=0 --size=100000m --time_based --runtime=600 \
--numjobs=1 --filename=...
./fio --name=seq-writers --ioengine=io_uring --iodepth=1 --rw=write \
--bs=4k --direct=0 --size=100000m --time_based --runtime=600 \
--numjobs=1 --filename=...
./fio --name=seq-writers --ioengine=libaio --iodepth=1 --rw=write \
--bs=4k --direct=0 --size=100000m --time_based --runtime=600 \
--numjobs=1 --filename=...
Testing:
This patch has been tested with xfstests, fsx, fio. xfstests shows no new
diffs compared to running without the patch series.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Adds nowait asserts to btree search functions which are not used by
buffered IO and direct IO paths.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We need to avoid unconditionally calling balance_dirty_pages_ratelimited
as it could wait for some reason. Use balance_dirty_pages_ratelimited_flags
with the BDP_ASYNC in case the buffered write is nowait, returning
EAGAIN eventually.
It also moves the function after the again label. This can cause the
function to be called a bit later, but this should have no impact in the
real world.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have everywhere setup for nowait, plumb NOWAIT through the write path.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add the nowait parameter to lock_and_cleanup_extent_if_need(). If the
nowait parameter is specified we try to lock the extent in nowait mode.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add nowait parameter to the prepare_pages function. In case nowait is
specified for an async buffered write request, do a nowait allocation or
return -EAGAIN.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now all the helpers that btrfs_check_nocow_lock uses handle nowait, add
a nowait flag to btrfs_check_nocow_lock so it can be used by the write
path.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For IOCB_NOWAIT we're going to want to use try lock on the extent lock,
and simply bail if there's an ordered extent in the range because the
only choice there is to wait for the ordered extent to complete.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In order to accommodate NOWAIT IOCB's we need to be able to do NO_FLUSH
data reservations, so plumb this through the delalloc reservation
system.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we have NOWAIT specified on our IOCB and we're writing into a
PREALLOC or NOCOW extent then we need to be able to tell
can_nocow_extent that we don't want to wait on any locks or metadata IO.
Fix can_nocow_extent to allow for NOWAIT.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For NOWAIT IOCBs we'll need a way to tell search to not wait on locks
or anything. Accomplish this by adding a path->nowait flag that will
use trylocks and skip reading of metadata, returning -EAGAIN in either
of these cases. For now we only need this for reads, so only the read
side is handled. Add an ASSERT() to catch anybody trying to use this
for writes so they know they'll have to implement the write side.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When one user did a wrong attempt to clear block group tree, which can
not be done through mount option, by using "-o clear_cache,space_cache=v2",
it will cause the following error on a fs with block-group-tree feature:
BTRFS info (device dm-1): force clearing of disk cache
BTRFS info (device dm-1): using free space tree
BTRFS info (device dm-1): clearing free space tree
BTRFS info (device dm-1): clearing compat-ro feature flag for FREE_SPACE_TREE (0x1)
BTRFS info (device dm-1): clearing compat-ro feature flag for FREE_SPACE_TREE_VALID (0x2)
BTRFS error (device dm-1): block-group-tree feature requires fres-space-tree and no-holes
BTRFS error (device dm-1): super block corruption detected before writing it to disk
BTRFS: error (device dm-1) in write_all_supers:4318: errno=-117 Filesystem corrupted (unexpected superblock corruption detected)
BTRFS warning (device dm-1: state E): Skipping commit of aborted transaction.
[CAUSE]
Although the dependency for block-group-tree feature is just an
artificial one (to reduce test matrix), we put the dependency check into
btrfs_validate_super().
This is too strict, and during space cache clearing, we will have a
window where free space tree is cleared, and we need to commit the super
block.
In that window, we had block group tree without v2 cache, and triggered
the artificial dependency check.
This is not necessary at all, especially for such a soft dependency.
[FIX]
Introduce a new helper, btrfs_check_features(), to do all the runtime
limitation checks, including:
- Unsupported incompat flags check
- Unsupported compat RO flags check
- Setting missing incompat flags
- Artificial feature dependency checks
Currently only block group tree will rely on this.
- Subpage runtime check for v1 cache
With this helper, we can move quite some checks from
open_ctree()/btrfs_remount() into it, and just call it after
btrfs_parse_options().
Now "-o clear_cache,space_cache=v2" will not trigger the above error
anymore.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ edit messages ]
Signed-off-by: David Sterba <dsterba@suse.com>
For function submit_extent_page() and alloc_new_bio(), we have an
argument @end_io_func to indicate the end io function.
But that function never change inside any call site of them, thus no
need to pass the pointer around everywhere.
There is a better match for the lifespan of all the call sites, as we
have btrfs_bio_ctrl structure, thus we can put the endio function
pointer there, and grab the pointer every time we allocate a new bio.
Also add extra ASSERT()s to make sure every call site of
submit_extent_page() and alloc_new_bio() has properly set the pointer
inside btrfs_bio_ctrl.
This removes one argument from the already long argument list of
submit_extent_page().
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Normally we put (page, pg_len, pg_offset) arguments together, just like
what __bio_add_page() does.
But in submit_extent_page(), what we got is, (page, disk_bytenr, pg_len,
pg_offset), which sometimes can be confusing.
Change the order to (disk_bytenr, page, pg_len, pg_offset) to make it
to follow the common schema.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit 390ed29b81 ("btrfs: refactor submit_extent_page() to make
bio and its flag tracing easier"), we are using bio_ctrl structure to
replace some of arguments of submit_extent_page().
But unfortunately that commit didn't update the comment for
submit_extent_page(), thus some arguments are stale like:
- bio_ret
- mirror_num
Those are all contained in bio_ctrl now.
- prev_bio_flags
We no longer use this flag to determine if we can merge bios.
Update the comment for submit_extent_page() to keep it up-to-date.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
dev-replace.h just has function prototypes for device replace, however
if you happen to include it in the wrong order you'll get compile errors
because of different structures not being defined. Since these are just
pointer args to functions we can declare them at the top in order to
reduce the pain of using the header.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We always check the root of an inode as well as it's inode number to
determine if it's a free space inode. This is problematic as the helper
is in a header file where it doesn't have the fs_info definition. To
avoid this and make the check a little cleaner simply add a flag to the
runtime_flags to indicate that the inode is a free space inode, set that
when we create the inode, and then change the helper to check for this
flag.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This exists to insert the btree_inode in the super blocks inode hash
table. Since it's only used for the btree inode move the code to where
we use it in disk-io.c and remove the helper.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is defined in btrfs_inode.h, and dereferences btrfs_root and
btrfs_fs_info, both of which aren't defined in btrfs_inode.h.
Additionally, in many places we already have root or fs_info, so this
helper often makes the code harder to read. So delete the helper and
simply open code it in the few places that we use it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is defined in ordered-data.h, but is only used in file-item.c.
Move this to file-item.c as it doesn't need to be global.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is purely cosmetic, to make it straightforward to copy and paste
the definition and helpers from ctree.h into fs.h. These are helpers
that act directly on the fs_info, and were scattered throughout ctree.h.
Move them directly below the fs_info definition to make it easier to
move them later. This includes the exclop prototypes, which shares an
enum that's used in struct btrfs_fs_info as well.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This helper is only used in inode.c, move it locally to that file
instead of defining it in ctree.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In order to make it more straightforward to move the fs_info struct and
it's related structures, move the struct declarations to the top of
ctree.h. This will make it easier to clean up after the fact.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This isn't a great spot for this, but one of the swapfile helper
functions is in volumes.c, so move the struct to volumes.h. In the
future when we have better separation of code there will be a more
natural spot for this.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is defined in volumes.c, move the prototype into volumes.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The code for this helper is in space-info.c, move the prototype to
space-info.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is actually embedded in struct btrfs_block_group, so move this
definition to block-group.h, and then open-code the init of the tree
where we init the rest of the block group instead of using a helper.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a block group related definition, move it into block-group.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a separate I/O failure tree to track the fail reads, so remove
the extra EXTENT_DAMAGED bit in the I/O tree as it's set but never used.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're only initializing extent_io_tree's with a private data if we're a
normal inode, so we don't need this extra check.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We only use this for normal inodes, so don't set it if we're not a
normal inode.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of taking up a whole argument to indicate we're clearing
everything in a range, simply add another EXTENT bit to control this,
and then update all the callers to drop this argument from the
clear_extent_bit variants.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
