This silences the following coccinelle warning:
"WARNING: sum of probable bitmasks, consider |"
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: jing yangyang <jing.yangyang@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
When skipping the tests due to a lack of system support for MTE we
currently print a message saying FAIL which makes it look like the test
failed even though the test did actually report KSFT_SKIP, creating some
confusion. Change the error message to say SKIP instead so things are
clearer.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210819172902.56211-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Adding selftests for the newly added functionality to call bpf_setsockopt()
and bpf_getsockopt() from setsockopt BPF programs.
Test Details:
1. BPF Program
Checks for changes in IPV6_TCLASS(SOL_IPV6) via setsockopt
If the cca for the socket is not cubic do nothing
If the newly set value for IPV6_TCLASS is 45 (0x2d) (as per our use-case)
then change the cc from cubic to reno
2. User Space Program
Creates an AF_INET6 socket and set the cca for that to be "cubic"
Attach the program and set the IPV6_TCLASS to 0x2d using setsockopt
Verify the cca for the socket changed to reno
Signed-off-by: Prankur Gupta <prankgup@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210817224221.3257826-3-prankgup@fb.com
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from bpf, wireless and mac80211
trees.
Current release - regressions:
- tipc: call tipc_wait_for_connect only when dlen is not 0
- mac80211: fix locking in ieee80211_restart_work()
Current release - new code bugs:
- bpf: add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id()
- ethernet: ice: fix perout start time rounding
- wwan: iosm: prevent underflow in ipc_chnl_cfg_get()
Previous releases - regressions:
- bpf: clear zext_dst of dead insns
- sch_cake: fix srchost/dsthost hashing mode
- vrf: reset skb conntrack connection on VRF rcv
- net/rds: dma_map_sg is entitled to merge entries
Previous releases - always broken:
- ethernet: bnxt: fix Tx path locking and races, add Rx path
barriers"
* tag 'net-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
net: dpaa2-switch: disable the control interface on error path
Revert "flow_offload: action should not be NULL when it is referenced"
iavf: Fix ping is lost after untrusted VF had tried to change MAC
i40e: Fix ATR queue selection
r8152: fix the maximum number of PLA bp for RTL8153C
r8152: fix writing USB_BP2_EN
mptcp: full fully established support after ADD_ADDR
mptcp: fix memory leak on address flush
net/rds: dma_map_sg is entitled to merge entries
net: mscc: ocelot: allow forwarding from bridge ports to the tag_8021q CPU port
net: asix: fix uninit value bugs
ovs: clear skb->tstamp in forwarding path
net: mdio-mux: Handle -EPROBE_DEFER correctly
net: mdio-mux: Don't ignore memory allocation errors
net: mdio-mux: Delete unnecessary devm_kfree
net: dsa: sja1105: fix use-after-free after calling of_find_compatible_node, or worse
sch_cake: fix srchost/dsthost hashing mode
ixgbe, xsk: clean up the resources in ixgbe_xsk_pool_enable error path
net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32
mac80211: fix locking in ieee80211_restart_work()
...
Commit 09e856d54b ("vrf: Reset skb conntrack connection on VRF rcv")
fixes the "reverse-DNAT" of an SNAT-ed packet over a VRF.
This patch adds a test for this scenario.
Signed-off-by: Lahav Schlesinger <lschlesinger@drivenets.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the NCI testcase reading T4T Tag that has NFC TEST in plain text.
the virtual device application acts as T4T Tag in this testcase.
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To reuse the start/stop discovery code in other testcase, extract the code.
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To reuse the send_cmd_mt_nla for NLM_F_REQUEST and NLM_F_DUMP flag,
add the flags parameter to the function.
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
memcpy should be executed only in case nla_len's value is greater than 0.
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
nlattr could have a padding for 4 bytes alignment. So next nla's offset
should be calculated with a padding.
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch dealt with the MPTCP_PM_ADDR_FLAG_FULLMESH flag in add_addr()
and print_addr(), to set and print out the fullmesh flag.
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull LKMM changes from Paul E. McKenney:
"These changes focus on documentation, providing additional
examples and use cases."
Signed-off-by: Ingo Molnar <mingo@kernel.org>
libbpf CI has reported send_signal test is flaky although
I am not able to reproduce it in my local environment.
But I am able to reproduce with on-demand libbpf CI ([1]).
Through code analysis, the following is possible reason.
The failed subtest runs bpf program in softirq environment.
Since bpf_send_signal() only sends to a fork of "test_progs"
process. If the underlying current task is
not "test_progs", bpf_send_signal() will not be triggered
and the subtest will fail.
To reduce the chances where the underlying process is not
the intended one, this patch boosted scheduling priority to
-20 (highest allowed by setpriority() call). And I did
10 runs with on-demand libbpf CI with this patch and I
didn't observe any failures.
[1] https://github.com/libbpf/libbpf/actions/workflows/ondemand.yml
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210817190923.3186725-1-yhs@fb.com
This patch adds '-a' and '-d' arguments supporting both exact string match as
well as using '*' wildcard in test/subtests selection. '-a' and '-t' can
co-exists, same as '-d' and '-b', in which case they just add to the list of
allowed or denied test selectors.
Caveat: Same as the current substring matching mechanism, test and subtest
selector applies independently, 'a*/b*' will execute all tests matching "a*",
and with subtest name matching "b*", but tests matching "a*" that has no
subtests will also be executed.
Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210817044732.3263066-5-fallentree@fb.com
This patch add test name in subtest status message line, making it possible to
grep ':OK' in the output to generate a list of passed test+subtest names, which
can be processed to generate argument list to be used with "-a", "-d" exact
string matching.
Example:
#1/1 align/mov:OK
..
#1/12 align/pointer variable subtraction:OK
#1 align:OK
Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210817044732.3263066-4-fallentree@fb.com
In skip_account(), test->skip_cnt is set to 0 at the end, this makes next print
statement never display SKIP status for the subtest. This patch moves the
accounting logic after the print statement, fixing the issue.
This patch also added SKIP status display for normal tests.
Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210817044732.3263066-3-fallentree@fb.com
Using a fixed delay of 1 microsecond has proven flaky in slow CPU environment,
e.g. Github Actions CI system. This patch adds exponential backoff with a cap
of 50ms to reduce the flakiness of the test. Initial delay is chosen at random
in the range [0ms, 5ms).
Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210817045713.3307985-1-fallentree@fb.com
As previously discussed with David Ahern, here is a refactored and improved
version of the IOAM self-test. It is now more complete and more robust. Now,
all tests are divided into three categories: OUTPUT (evaluates the IOAM
processing by the sender), INPUT (evaluates the IOAM processing by the receiver)
and GLOBAL (evaluates wider use cases that do not fall into the other two
categories). Both OUTPUT and INPUT tests only use a two-node topology (alpha and
beta), while GLOBAL tests use the entire three-node topology (alpha, beta,
gamma). Each test is documented inside its own handler in the (bash) script.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend attach_probe selftests to specify ref_ctr_offset for uprobe/uretprobe
and validate that its value is incremented from zero.
Turns out that once uprobe is attached with ref_ctr_offset, uretprobe for the
same location/function *has* to use ref_ctr_offset as well, otherwise
perf_event_open() fails with -EINVAL. So this test uses ref_ctr_offset for
both uprobe and uretprobe, even though for the purpose of test uprobe would be
enough.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-17-andrii@kernel.org
When attaching to uprobes through perf subsystem, it's possible to specify
offset of a so-called USDT semaphore, which is just a reference counted u16,
used by kernel to keep track of how many tracers are attached to a given
location. Support for this feature was added in [0], so just wire this through
uprobe_opts. This is important to enable implementing USDT attachment and
tracing through libbpf's bpf_program__attach_uprobe_opts() API.
[0] a6ca88b241 ("trace_uprobe: support reference counter in fd-based uprobe")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-16-andrii@kernel.org
Add selftest with few subtests testing proper bpf_cookie usage.
Kprobe and uprobe subtests are pretty straightforward and just validate that
the same BPF program attached with different bpf_cookie will be triggered with
those different bpf_cookie values.
Tracepoint subtest is a bit more interesting, as it is the only
perf_event-based BPF hook that shares bpf_prog_array between multiple
perf_events internally. This means that the same BPF program can't be attached
to the same tracepoint multiple times. So we have 3 identical copies. This
arrangement allows to test bpf_prog_array_copy()'s handling of bpf_prog_array
list manipulation logic when programs are attached and detached. The test
validates that bpf_cookie isn't mixed up and isn't lost during such list
manipulations.
Perf_event subtest validates that two BPF links can be created against the
same perf_event (but not at the same time, only one BPF program can be
attached to perf_event itself), and that for each we can specify different
bpf_cookie value.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-15-andrii@kernel.org
Wire through bpf_cookie for all attach APIs that use perf_event_open under the
hood:
- for kprobes, extend existing bpf_kprobe_opts with bpf_cookie field;
- for perf_event, uprobe, and tracepoint APIs, add their _opts variants and
pass bpf_cookie through opts.
For kernel that don't support BPF_LINK_CREATE for perf_events, and thus
bpf_cookie is not supported either, return error and log warning for user.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-12-andrii@kernel.org
Add ability to specify bpf_cookie value when creating BPF perf link with
bpf_link_create() low-level API.
Given BPF_LINK_CREATE command is growing and keeps getting new fields that are
specific to the type of BPF_LINK, extend libbpf side of bpf_link_create() API
and corresponding OPTS struct to accomodate such changes. Add extra checks to
prevent using incompatible/unexpected combinations of fields.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-11-andrii@kernel.org
Detect kernel support for BPF perf link and prefer it when attaching to
perf_event, tracepoint, kprobe/uprobe. Underlying perf_event FD will be kept
open until BPF link is destroyed, at which point both perf_event FD and BPF
link FD will be closed.
This preserves current behavior in which perf_event FD is open for the
duration of bpf_link's lifetime and user is able to "disconnect" bpf_link from
underlying FD (with bpf_link__disconnect()), so that bpf_link__destroy()
doesn't close underlying perf_event FD.When BPF perf link is used, disconnect
will keep both perf_event and bpf_link FDs open, so it will be up to
(advanced) user to close them. This approach is demonstrated in bpf_cookie.c
selftests, added in this patch set.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-10-andrii@kernel.org
bpf_link->destroy() isn't used by any code, so remove it. Instead, add ability
to override deallocation procedure, with default doing plain free(link). This
is necessary for cases when we want to "subclass" struct bpf_link to keep
extra information, as is the case in the next patch adding struct
bpf_link_perf.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-9-andrii@kernel.org
Ensure libbpf.so is re-built whenever libbpf.map is modified. Without this,
changes to libbpf.map are not detected and versioned symbols mismatch error
will be reported until `make clean && make` is used, which is a suboptimal
developer experience.
Fixes: 306b267cb3 ("libbpf: Verify versioned symbols")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-8-andrii@kernel.org
Add new BPF helper, bpf_get_attach_cookie(), which can be used by BPF programs
to get access to a user-provided bpf_cookie value, specified during BPF
program attachment (BPF link creation) time.
Naming is hard, though. With the concept being named "BPF cookie", I've
considered calling the helper:
- bpf_get_cookie() -- seems too unspecific and easily mistaken with socket
cookie;
- bpf_get_bpf_cookie() -- too much tautology;
- bpf_get_link_cookie() -- would be ok, but while we create a BPF link to
attach BPF program to BPF hook, it's still an "attachment" and the
bpf_cookie is associated with BPF program attachment to a hook, not a BPF
link itself. Technically, we could support bpf_cookie with old-style
cgroup programs.So I ultimately rejected it in favor of
bpf_get_attach_cookie().
Currently all perf_event-backed BPF program types support
bpf_get_attach_cookie() helper. Follow-up patches will add support for
fentry/fexit programs as well.
While at it, mark bpf_tracing_func_proto() as static to make it obvious that
it's only used from within the kernel/trace/bpf_trace.c.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-7-andrii@kernel.org
Add ability for users to specify custom u64 value (bpf_cookie) when creating
BPF link for perf_event-backed BPF programs (kprobe/uprobe, perf_event,
tracepoints).
This is useful for cases when the same BPF program is used for attaching and
processing invocation of different tracepoints/kprobes/uprobes in a generic
fashion, but such that each invocation is distinguished from each other (e.g.,
BPF program can look up additional information associated with a specific
kernel function without having to rely on function IP lookups). This enables
new use cases to be implemented simply and efficiently that previously were
possible only through code generation (and thus multiple instances of almost
identical BPF program) or compilation at runtime (BCC-style) on target hosts
(even more expensive resource-wise). For uprobes it is not even possible in
some cases to know function IP before hand (e.g., when attaching to shared
library without PID filtering, in which case base load address is not known
for a library).
This is done by storing u64 bpf_cookie in struct bpf_prog_array_item,
corresponding to each attached and run BPF program. Given cgroup BPF programs
already use two 8-byte pointers for their needs and cgroup BPF programs don't
have (yet?) support for bpf_cookie, reuse that space through union of
cgroup_storage and new bpf_cookie field.
Make it available to kprobe/tracepoint BPF programs through bpf_trace_run_ctx.
This is set by BPF_PROG_RUN_ARRAY, used by kprobe/uprobe/tracepoint BPF
program execution code, which luckily is now also split from
BPF_PROG_RUN_ARRAY_CG. This run context will be utilized by a new BPF helper
giving access to this user-provided cookie value from inside a BPF program.
Generic perf_event BPF programs will access this value from perf_event itself
through passed in BPF program context.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210815070609.987780-6-andrii@kernel.org
