And thus avoid a Python stacktrace:
~/linux/tools/testing/selftests/net$ ./devlink_port_split.py
Traceback (most recent call last):
File "/home/linux/tools/testing/selftests/net/./devlink_port_split.py",
line 277, in <module> main()
File "/home/linux/tools/testing/selftests/net/./devlink_port_split.py",
line 242, in main
dev = list(devs.keys())[0]
IndexError: list index out of range
Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure that SO_NETNS_COOKIE returns a non-zero value, and
that sockets from different namespaces have a distinct cookie
value.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to a comment in commit 99513cfa16 ("selftest: Fixes for
icmp_redirect test") the test "IPv6: mtu exception plus redirect" is
expected to fail, because of a bug in the IPv6 logic that hasn't been
fixed yet apparently.
We should probably consider this failure as an "expected failure",
therefore change the script to return XFAIL for that particular test and
also report the total amount of expected failures at the end of the run.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without this modification, we were often displaying this error messages:
FAIL: Could not even run loopback test
But $ret could have been set to a non 0 value in many different cases:
- net.mptcp.enabled=0 is not working as expected
- setsockopt(..., TCP_ULP, "mptcp", ...) is allowed
- ping between each netns are failing
- tests between ns1 as a receiver and ns>1 are failing
- other tests not involving ns1 as a receiver are failing
So not only for the loopback test.
Now a clearer message, including the time it took to run all tests, is
displayed.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ChaCha support did not adjust the bidirectional test.
We need to set up KTLS in reverse direction correctly,
otherwise these two cases will fail:
tls.12_chacha.bidir
tls.13_chacha.bidir
Fixes: 4f336e88a8 ("selftests/tls: add CHACHA20-POLY1305 to tls selftests")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
A bunch of tests uses uninitialized stack memory as random
data to send. This is harmless but generates compiler warnings.
Explicitly init the buffers with random data.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trivial conflicts in net/can/isotp.c and
tools/testing/selftests/net/mptcp/mptcp_connect.sh
scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c
to include/linux/ptp_clock_kernel.h in -next so re-apply
the fix there.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds a new icmp.sh selftest for testing that the kernel will respond
correctly with an ICMP unreachable message with the dummy (192.0.0.8)
source address when there are no IPv4 addresses configured to use as source
addresses.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new argument "-C" for the mptcp_join.sh script to set
the sysctl checksum_enabled to 1 in ns1 and ns2 to enable the data
checksum.
In chk_join_nr, check the counter of the mib for the data checksum.
Also added a new argument "-S" for the mptcp_join.sh script to start the
test cases that verify the checksum handshake:
* Sender and listener both have checksums off
* Sender and listener both have checksums on
* Sender checksums off, listener checksums on
* Sender checksums on, listener checksums off
The output looks like this:
01 checksum test 0 0 sum[ ok ] - csum [ ok ]
02 checksum test 1 1 sum[ ok ] - csum [ ok ]
03 checksum test 0 1 sum[ ok ] - csum [ ok ]
04 checksum test 1 0 sum[ ok ] - csum [ ok ]
05 no JOIN syn[ ok ] - synack[ ok ] - ack[ ok ]
sum[ ok ] - csum [ ok ]
06 single subflow, limited by client syn[ ok ] - synack[ ok ] - ack[ ok ]
sum[ ok ] - csum [ ok ]
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new argument "-C" for the mptcp_connect.sh script to
set the sysctl checksum_enabled to 1 in ns1, ns2, ns3 and ns4 to enable
the data checksum.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
udpgro_fwd.sh contains many bash specific operators ("[[", "local -r"),
but it's using /bin/sh; in some distro /bin/sh is mapped to /bin/dash,
that doesn't support such operators.
Force the test to use /bin/bash explicitly and prevent false positive
test failures.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
veth.sh is a shell script that uses /bin/sh; some distro (Ubuntu for
example) use dash as /bin/sh and in this case the test reports the
following error:
# ./veth.sh: 21: local: -r: bad variable name
# ./veth.sh: 21: local: -r: bad variable name
This happens because dash doesn't support the option "-r" with local.
Moreover, in case of missing bpf object, the script is exiting -1, that
is an illegal number for dash:
exit: Illegal number: -1
Change the script to be compatible both with bash and dash and prevent
the errors above.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add devlink_trap_drop_packets_get function, as well as test that are
used to verify devlink (hard) dropped stats functionality works.
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Oliver reported a use case where deleting a VRF device can hang
waiting for the refcnt to drop to 0. The root cause is that the dst
is allocated against the VRF device but cached on the loopback
device.
The use case (added to the selftests) has an implicit VRF crossing
due to the ordering of the FIB rules (lookup local is before the
l3mdev rule, but the problem occurs even if the FIB rules are
re-ordered with local after l3mdev because the VRF table does not
have a default route to terminate the lookup). The end result is
is that the FIB lookup returns the loopback device as the nexthop,
but the ingress device is in a VRF. The mismatch causes the dst
alloc against the VRF device but then cached on the loopback.
The fix is to bring the trick used for IPv6 (see ip6_rt_get_dev_rcu):
pick the dst alloc device based the fib lookup result but with checks
that the result has a nexthop device (e.g., not an unreachable or
prohibit entry).
Fixes: f5a0aab84b ("net: ipv4: dst for local input routes should use l3mdev if relevant")
Reported-by: Oliver Herms <oliver.peter.herms@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test cleanup path for routes usinig nexthop objects before the
reference is taken on the nexthop. Specifically, bad metric for
ipv4 and ipv6 and source routing for ipv6.
Selftests that correspond to the recent bug fix:
821bbf79fe ("ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions")
Signed-off-by: David Ahern <dsahern@kernel.org>
Cc: Coco Li <lixiaoyan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the commit referenced below, a check was added to devlink_lib that
asserts the existence of a devlink device referenced by $DEVLINK_DEV.
Unfortunately, several netdevsim tests point DEVLINK_DEV at a device that
does not exist at the time that devlink_lib is sourced. Thus these tests
spuriously fail.
Fix this by introducing an override. By setting DEVLINK_DEV to an empty
string, the user declares their intention to handle DEVLINK_DEV management
on their own.
In all netdevsim tests that use devlink_lib and set DEVLINK_DEV, set
instead an empty DEVLINK_DEV just before sourcing devlink_lib, and set it
to the correct value right afterwards.
Fixes: 557c4d2f78 ("selftests: devlink_lib: add check for devlink device existence")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several tests do not set some ports down as part of their cleanup(),
resulting in IPv6 link-local addresses and associated routes not being
deleted.
These leaks were found using a BPF tool that monitors ASIC resources.
Solve this by setting the ports down at the end of the tests.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This silences a static checker warning due to the unusual macro
construction of EXPECT_*() by adding explicit {}s around the enclosing
while loop.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 7f657d5bf5 ("selftests: tls: add selftests for TLS sockets")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This extends the existing setsockopt test case to also check for cmsg
timestamps.
mptcp_connect will abort/fail if the setockopt was passed but the
timestamp cmsg isn't present after successful recvmsg().
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous commit noted that we can have fallback
scenario due to OoO (or packet drop). Update the self-tests
accordingly
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When there is no devlink device, the following command will return:
$ devlink -j dev show
{dev:{}}
This will cause IndexError when trying to access the first element
in dev of this json dataset. Use the kselftest framework skip code
to skip this test in this case.
Example output with this change:
# selftests: net: devlink_port_split.py
# no devlink device was found, test skipped
ok 7 selftests: net: devlink_port_split.py # SKIP
Link: https://bugs.launchpad.net/bugs/1928889
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that when the hash policy is set to custom, traffic is distributed
only according to the inner fields set in the fib_multipath_hash_fields
sysctl.
Each time set a different field and make sure traffic is only
distributed when the field is changed in the packet stream.
The test only verifies the behavior of IPv4/IPv6 overlays on top of an
IPv6 underlay network. The previous patch verified the same with an IPv4
underlay network.
Example output:
# ./ip6gre_custom_multipath_hash.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
INFO: Running IPv4 overlay custom multipath hash tests
TEST: Multipath hash field: Inner source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6602 / 6002
TEST: Multipath hash field: Inner source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 1 / 12601
TEST: Multipath hash field: Inner destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6802 / 5801
TEST: Multipath hash field: Inner destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12602 / 3
TEST: Multipath hash field: Inner source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16431 / 16344
TEST: Multipath hash field: Inner source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 32773
TEST: Multipath hash field: Inner destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16431 / 16344
TEST: Multipath hash field: Inner destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 2 / 32772
INFO: Running IPv6 overlay custom multipath hash tests
TEST: Multipath hash field: Inner source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6704 / 5902
TEST: Multipath hash field: Inner source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 1 / 12600
TEST: Multipath hash field: Inner destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 5751 / 6852
TEST: Multipath hash field: Inner destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12602 / 0
TEST: Multipath hash field: Inner flowlabel (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 8272 / 8181
TEST: Multipath hash field: Inner flowlabel (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 3 / 12602
TEST: Multipath hash field: Inner source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16424 / 16351
TEST: Multipath hash field: Inner source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 3 / 32774
TEST: Multipath hash field: Inner destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16425 / 16350
TEST: Multipath hash field: Inner destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 2 / 32773
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that when the hash policy is set to custom, traffic is distributed
only according to the inner fields set in the fib_multipath_hash_fields
sysctl.
Each time set a different field and make sure traffic is only
distributed when the field is changed in the packet stream.
The test only verifies the behavior of IPv4/IPv6 overlays on top of an
IPv4 underlay network. A subsequent patch will do the same with an IPv6
underlay network.
Example output:
# ./gre_custom_multipath_hash.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
INFO: Running IPv4 overlay custom multipath hash tests
TEST: Multipath hash field: Inner source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6601 / 6001
TEST: Multipath hash field: Inner source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 12600
TEST: Multipath hash field: Inner destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6802 / 5802
TEST: Multipath hash field: Inner destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12601 / 1
TEST: Multipath hash field: Inner source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16430 / 16344
TEST: Multipath hash field: Inner source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 32772
TEST: Multipath hash field: Inner destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16430 / 16343
TEST: Multipath hash field: Inner destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 32772
INFO: Running IPv6 overlay custom multipath hash tests
TEST: Multipath hash field: Inner source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6702 / 5900
TEST: Multipath hash field: Inner source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 12601
TEST: Multipath hash field: Inner destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 5751 / 6851
TEST: Multipath hash field: Inner destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12602 / 1
TEST: Multipath hash field: Inner flowlabel (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 8364 / 8065
TEST: Multipath hash field: Inner flowlabel (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12601 / 0
TEST: Multipath hash field: Inner source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16425 / 16349
TEST: Multipath hash field: Inner source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 1 / 32770
TEST: Multipath hash field: Inner destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16425 / 16349
TEST: Multipath hash field: Inner destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 2 / 32770
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that when the hash policy is set to custom, traffic is distributed
only according to the outer fields set in the fib_multipath_hash_fields
sysctl.
Each time set a different field and make sure traffic is only
distributed when the field is changed in the packet stream.
The test only verifies the behavior with non-encapsulated IPv4 and IPv6
packets. Subsequent patches will add tests for IPv4/IPv6 overlays on top
of IPv4/IPv6 underlay networks.
Example output:
# ./custom_multipath_hash.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
INFO: Running IPv4 custom multipath hash tests
TEST: Multipath hash field: Source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6353 / 6254
TEST: Multipath hash field: Source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 12600
TEST: Multipath hash field: Destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6102 / 6502
TEST: Multipath hash field: Destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 1 / 12601
TEST: Multipath hash field: Source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16428 / 16345
TEST: Multipath hash field: Source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 32770 / 2
TEST: Multipath hash field: Destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16428 / 16345
TEST: Multipath hash field: Destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 32770 / 2
INFO: Running IPv6 custom multipath hash tests
TEST: Multipath hash field: Source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6704 / 5903
TEST: Multipath hash field: Source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12600 / 0
TEST: Multipath hash field: Destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 5551 / 7052
TEST: Multipath hash field: Destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12603 / 0
TEST: Multipath hash field: Flowlabel (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 8378 / 8080
TEST: Multipath hash field: Flowlabel (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 2 / 12603
TEST: Multipath hash field: Source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16385 / 16388
TEST: Multipath hash field: Source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 32774
TEST: Multipath hash field: Destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16386 / 16390
TEST: Multipath hash field: Destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 32771 / 2
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Expect the lowest IPv4 address in a subnet to be assignable
and addressable as a unicast (non-broadcast) address on a
local network segment.
Signed-off-by: Seth David Schoen <schoen@loyalty.org>
Suggested-by: John Gilmore <gnu@toad.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
LANG gives a weak default to each LC_* in case it is not explicitly
defined. LC_ALL, if set, overrides all other LC_* variables.
LANG < LC_CTYPE, LC_COLLATE, LC_MONETARY, LC_NUMERIC, ... < LC_ALL
This is why documentation such as [1] suggests to set LC_ALL in build
scripts to get the deterministic result.
LANG=C is not strong enough to override LC_* that may be set by end
users.
[1]: https://reproducible-builds.org/docs/locales/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Matthias Maennich <maennich@google.com>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> (mptcp)
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We found that with the latest mainline kernel (5.12.0-051200rc8) on
some KVM instances / bare-metal systems, the following tests will take
longer than the kselftest framework default timeout (45 seconds) to
run and thus got terminated with TIMEOUT error:
* xfrm_policy.sh - took about 2m20s
* pmtu.sh - took about 3m5s
* udpgso_bench.sh - took about 60s
Bump the timeout setting to 5 minutes to allow them have a chance to
finish.
https://bugs.launchpad.net/bugs/1856010
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mirror_gre_scale test creates as many ERSPAN sessions as the underlying
chip supports, and tests that they all work. In order to determine that it
issues a stream of ICMP packets and checks if they are mirrored as
expected.
However, the mausezahn invocation missed the -6 flag to identify the use of
IPv6 protocol, and was sending ICMP messages over IPv6, as opposed to
ICMP6. It also didn't pass an explicit source IP address, which apparently
worked at some point in the past, but does not anymore.
To fix these issues, extend the function mirror_test() in mirror_lib by
detecting the IPv6 protocol addresses, and using a different ICMP scheme.
Fix __mirror_gre_test() in the selftest itself to pass a source IP address.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The FDB roaming test installs a destination MAC address on the wrong
interface of an FDB database and tests whether the mirroring fails, because
packets are sent to the wrong port. The test by mistake installs the FDB
entry as local. This worked previously, because drivers were notified of
local FDB entries in the same way as of static entries. However that has
been fixed in the commit 6ab4c3117a ("net: bridge: don't notify switchdev
for local FDB addresses"), and local entries are not notified anymore. As a
result, the HW is not reconfigured for the FDB roam, and mirroring keeps
working, failing the test.
To fix the issue, mark the FDB entry as static.
Fixes: 9c7c8a8244 ("selftests: forwarding: mirror_gre_vlan_bridge_1q: Add more tests")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Add vlan match and pop actions to the flowtable offload,
patches from wenxu.
2) Reduce size of the netns_ct structure, which itself is
embedded in struct net Make netns_ct a read-mostly structure.
Patches from Florian Westphal.
3) Add FLOW_OFFLOAD_XMIT_UNSPEC to skip dst check from garbage
collector path, as required by the tc CT action. From Roi Dayan.
4) VLAN offload fixes for nftables: Allow for matching on both s-vlan
and c-vlan selectors. Fix match of VLAN id due to incorrect
byteorder. Add a new routine to properly populate flow dissector
ethertypes.
5) Missing keys in ip{6}_route_me_harder() results in incorrect
routes. This includes an update for selftest infra. Patches
from Ido Schimmel.
6) Add counter hardware offload support through FLOW_CLS_STATS.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that all the nexthops are flushed when a multi-part nexthop dump is
required for the flushing.
Without previous patch:
# ./fib_nexthops.sh
TEST: Large scale nexthop flushing [FAIL]
With previous patch:
# ./fib_nexthops.sh
TEST: Large scale nexthop flushing [ OK ]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that packets are correctly routed when netfilter mangling rules are
present.
Without previous patch:
# ./fib_tests.sh -t ipv4_mangle
IPv4 mangling tests
TEST: Connection with correct parameters [ OK ]
TEST: Connection with incorrect parameters [ OK ]
TEST: Connection with correct parameters - mangling [FAIL]
TEST: Connection with correct parameters - no mangling [ OK ]
TEST: Connection check - server side [FAIL]
Tests passed: 3
Tests failed: 2
# ./fib_tests.sh -t ipv6_mangle
IPv6 mangling tests
TEST: Connection with correct parameters [ OK ]
TEST: Connection with incorrect parameters [ OK ]
TEST: Connection with correct parameters - mangling [FAIL]
TEST: Connection with correct parameters - no mangling [ OK ]
TEST: Connection check - server side [FAIL]
Tests passed: 3
Tests failed: 2
With previous patch:
# ./fib_tests.sh -t ipv4_mangle
IPv4 mangling tests
TEST: Connection with correct parameters [ OK ]
TEST: Connection with incorrect parameters [ OK ]
TEST: Connection with correct parameters - mangling [ OK ]
TEST: Connection with correct parameters - no mangling [ OK ]
TEST: Connection check - server side [ OK ]
Tests passed: 5
Tests failed: 0
# ./fib_tests.sh -t ipv6_mangle
IPv6 mangling tests
TEST: Connection with correct parameters [ OK ]
TEST: Connection with incorrect parameters [ OK ]
TEST: Connection with correct parameters - mangling [ OK ]
TEST: Connection with correct parameters - no mangling [ OK ]
TEST: Connection check - server side [ OK ]
Tests passed: 5
Tests failed: 0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Extend mptcp_connect tool with SO_MARK support (-M <value>) and
add a test case that checks that the packet mark gets copied to all
subflows.
This is done by only allowing packets with either skb->mark 1 or 2
via iptables.
DROP rule packet counter is checked; if its not zero, print an error
message and fail the test case.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add some basic veth tests, that verify the expected flags and
aggregation with different setups (default, xdp, etc...)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added a new testcase for setting the net device name. In it,
pass the net device name to pm_nl_ctl to set the ifindex field of struct
mptcp_pm_addr_entry.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Very occasionally, MPTCP selftests fail. Yeah, I saw that at least once!
Here we provide more details in case of errors with mptcp_join.sh script
like it was done with mptcp_connect.sh, see
commit 767389c8dd ("selftests: mptcp: dump more info on errors")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
'mptcp_connect' already has a timeout for poll() but in some cases, it
is not enough.
With "timeout" tool, we will force the command to fail if it doesn't
finish on time. Thanks to that, the script will continue and display
details about the current state before marking the test as failed.
Displaying this state is very important to be able to understand the
issue. Best to have our CI reporting the issue than just "the test
hanged".
Note that in mptcp_connect.sh, we were using a long timeout to validate
the fact we cannot create a socket if a sysctl is set. We don't need
this timeout.
In diag.sh, we want to send signals to mptcp_connect instances that have
been started in the netns. But we cannot send this signal to 'timeout'
otherwise that will stop the timeout and messages telling us SIGUSR1 has
been received will be printed. Instead of trying to find the right PID
and storing them in an array, we can simply use the output of
'ip netns pids' which is all the PIDs we want to send signal to.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/160
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SO_TXTIME hardware offload requires testing across devices, either
between machines or separate network namespaces.
Split up SO_TXTIME test into tx and rx modes, so traffic can be
sent from one process to another. Create a veth-pair on different
namespaces and bind each process to an end point via [-S]ource and
[-D]estination parameters. Optional start [-t]ime parameter can be
passed to synchronize the test across the hosts (with synchorinzed
clocks).
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added the testcases for removing the id 0 subflow and the id 0
address.
In do_transfer, use the removing addresses number '9' for deleting the id
0 address.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the id 0 address, different MPTCP connections could be using
different IP addresses for id 0.
This patch added an extra argument IP address for del_addr when
using id 0.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IDs are supposed to be between 0 and 255.
In pm_nl_ctl, for both the 'add' and 'get' instruction, the ID is casted
in a u_int8_t. So if we give 256, we will delete ID 0. Obviously, the
goal is not to delete this ID by giving 256.
We could modify pm_nl_ctl and stop if the ID is negative or higher than
255 but probably better not to increase the number of lines for such
things in this tool which is only used in selftests. Instead, we use it
within the limits.
This modification also means that we will no longer add a new ID for the
2nd entry. That's why we removed an expected entry from the dump and
introduced with
commit dc8eb10e95 ("selftests: mptcp: add testcases for setting the address ID").
So now we delete ID 9 like before and we add entries for IDs 10 to 255
that are deleted just after.
Note that this could be seen as a fix but it was not really an issue so
far: we were simply playing with ID 0/1 once again. With the following
commit ("selftests: mptcp: add addr argument for del_addr"), it will be
different because ID 0 is going to required an address. We don't want
errors when trying to delete ID 0 without the address argument.
Acked-and-tested-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
