Fix W=1 warnings about variables assigned but never used.
- One variable is only used when CONFIG_FB_ATY_GENERIC_LCD is defined
Fix so variable is only defined with CONFIG_FB_ATY_GENERIC_LCD
- Several variables was only assigned by a call to aty_ld_le32().
Drop the variables but keep the call to aty_ld_le32() as it may
have unexpected side-effects.
v2:
- Updated subject (Lee)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-7-sam@ravnborg.org
Pull Hyper-V fix from Wei Liu:
"One patch from Dexuan to fix VRAM cache type in Hyper-V framebuffer
driver"
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
video: hyperv_fb: Fix the cache type when mapping the VRAM
x86 Hyper-V used to essentially always overwrite the effective cache type
of guest memory accesses to WB. This was problematic in cases where there
is a physical device assigned to the VM, since that often requires that
the VM should have control over cache types. Thus, on newer Hyper-V since
2018, Hyper-V always honors the VM's cache type, but unexpectedly Linux VM
users start to complain that Linux VM's VRAM becomes very slow, and it
turns out that Linux VM should not map the VRAM uncacheable by ioremap().
Fix this slowness issue by using ioremap_cache().
On ARM64, ioremap_cache() is also required as the host also maps the VRAM
cacheable, otherwise VM Connect can't display properly with ioremap() or
ioremap_wc().
With this change, the VRAM on new Hyper-V is as fast as regular RAM, so
it's no longer necessary to use the hacks we added to mitigate the
slowness, i.e. we no longer need to allocate physical memory and use
it to back up the VRAM in Generation-1 VM, and we also no longer need to
allocate physical memory to back up the framebuffer in a Generation-2 VM
and copy the framebuffer to the real VRAM. A further big change will
address these for v5.11.
Fixes: 68a2d20b79 ("drivers/video: add Hyper-V Synthetic Video Frame Buffer Driver")
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/20201118000305.24797-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
So ever since syzbot discovered fbcon, we have solid proof that it's
full of bugs. And often the solution is to just delete code and remove
features, e.g. 50145474f6 ("fbcon: remove soft scrollback code").
Now the problem is that most modern-ish drivers really only treat
fbcon as an dumb kernel console until userspace takes over, and Oops
printer for some emergencies. Looking at drm drivers and the basic
vesa/efi fbdev drivers shows that only 3 drivers support any kind of
acceleration:
- nouveau, seems to be enabled by default
- omapdrm, when a DMM remapper exists using remapper rewriting for
y/xpanning
- gma500, but that is getting deleted now for the GTT remapper trick,
and the accelerated copyarea never set the FBINFO_HWACCEL_COPYAREA
flag, so unused (and could be deleted already I think).
No other driver supportes accelerated fbcon. And fbcon is the only
user of this accel code (it's not exposed as uapi through ioctls),
which means we could garbage collect fairly enormous amounts of code
if we kill this.
Plus because syzbot only runs on virtual hardware, and none of the
drivers for that have acceleration, we'd remove a huge gap in testing.
And there's no other even remotely comprehensive testing aside from
syzbot.
This patch here just disables the acceleration code by always
redrawing when scrolling. The plan is that once this has been merged
for well over a year in released kernels, we can start to go around
and delete a lot of code.
v2:
- Drop a few more unused local variables, somehow I missed the
compiler warnings (Sam)
- Fix typo in comment (Jiri)
- add a todo entry for the cleanup (Thomas)
v3: Remove more unused variables (0day)
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Peilin Ye <yepeilin.cs@gmail.com>
Cc: George Kennedy <george.kennedy@oracle.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029132229.4068359-1-daniel.vetter@ffwll.ch
For user-provided fonts, the framebuffer layer is using a magic
negative-indexing macro, FNTCHARCNT(), to keep track of their number of
characters:
#define FNTCHARCNT(fd) (((int *)(fd))[-3])
For built-in fonts, it is using hard-coded values (256). This results in
something like the following:
map.length = (ops->p->userfont) ?
FNTCHARCNT(ops->p->fontdata) : 256;
This is unsatisfactory. In fact, there is already a `charcount` field in
our virtual console descriptor (see `struct console_font` inside `struct
vc_data`), let us use it:
map.length = vc->vc_font.charcount;
Recently we added a `charcount` field to `struct font_desc`. Use it to set
`vc->vc_font.charcount` properly. The idea is:
- We only use FNTCHARCNT() on `vc->vc_font.data` and `p->fontdata`.
Assume FNTCHARCNT() is working as intended;
- Whenever `vc->vc_font.data` is set, also set `vc->vc_font.charcount`
properly;
- We can now replace `FNTCHARCNT(vc->vc_font.data)` with
`vc->vc_font.charcount`;
- Since `p->fontdata` always point to the same font data buffer with
`vc->vc_font.data`, we can also replace `FNTCHARCNT(p->fontdata)` with
`vc->vc_font.charcount`.
In conclusion, set `vc->vc_font.charcount` properly in fbcon_startup(),
fbcon_init(), fbcon_set_disp() and fbcon_do_set_font(), then replace
FNTCHARCNT() with `vc->vc_font.charcount`. No more if-else between
negative-indexing macros and hard-coded values.
Do not include <linux/font.h> in fbcon_rotate.c and tileblit.c, since they
no longer need it.
Depends on patch "Fonts: Add charcount field to font_desc".
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/e460a5780e54e3022661d5f09555144583b4cc59.1605169912.git.yepeilin.cs@gmail.com
.con_font_set and .con_font_default callbacks should not pass `struct
console_font *` as a parameter, since `struct console_font` is a UAPI
structure.
We are trying to let them use our new kernel font descriptor, `struct
font_desc` instead. To make that work slightly easier, first delete all of
their no-op implementations used by dummy consoles.
This will make KD_FONT_OP_SET and KD_FONT_OP_SET_DEFAULT ioctl() requests
on dummy consoles start to fail and return `-ENOSYS`, which is intended,
since no user should ever expect such operations to succeed on dummy
consoles.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/9952c7538d2a32bb1a82af323be482e7afb3dedf.1605169912.git.yepeilin.cs@gmail.com
commit f8f6ae5d07 ("mm: always have io_remap_pfn_range() set
pgprot_decrypted()") moves the pgprot_decrypted() into
io_remap_pfn_range(). Delete any, now confusing, open coded calls that
directly precede io_remap_pfn_range():
- drm_io_prot() is only in drm_mmap_locked() to call io_remap_pfn_range()
- fb_mmap() immediately calls vm_iomap_memory() which is a convenience
wrapper for io_remap_pfn_range()
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/0-v1-2e6a0db57868+166-drm_sme_clean_jgg@nvidia.com
Couple of variables are actually useless, remove them to save some gcc
warning:
drivers/video/fbdev/riva/riva_hw.c:250:21: warning: variable ‘mlwm’ set
but not used [-Wunused-but-set-variable]
drivers/video/fbdev/riva/riva_hw.c:665:15: warning: variable ‘vraw’ set
but not used [-Wunused-but-set-variable]
drivers/video/fbdev/riva/riva_hw.c:665:9: warning: variable ‘craw’ set
but not used [-Wunused-but-set-variable]
drivers/video/fbdev/riva/riva_hw.c:659:73: warning: variable ‘align’ set
but not used [-Wunused-but-set-variable]
drivers/video/fbdev/riva/riva_hw.c:659:50: warning: variable
‘color_key_enable’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1604822519-65607-1-git-send-email-alex.shi@linux.alibaba.com
The previous behavior was a little unexpected, its properties/problems:
1. It was designed to generate strictly increasing values (no repeats)
2. It had quantization errors when calculating step size. Resulting in
unexpected jumps near the end of some segments.
Example settings:
brightness-levels = <0 1 2 4 8 16 32 64 128 256>;
num-interpolated-steps = <16>;
Whenever num-interpolated-steps was larger than the distance
between 2 consecutive brightness levels the table would get really
discontinuous. The slope of the interpolation would stick with
integers only and if it was 0 the whole line segment would get skipped.
The distances between 1 2 4 and 8 would be 1 (property #1 fighting us),
and only starting with 16 it would start to interpolate properly.
Property #1 is not enough. The goal here is more than just monotonically
increasing. We should still care about the shape of the curve. Repeated
points might be desired if we're in the part of the curve where we want
to go slow (aka slope near 0).
Problem #2 is plainly a bug. Imagine if the 64 entry was 63 instead,
the calculated slope on the 32-63 segment will be almost half as it
should be.
The most expected and simplest algorithm for interpolation is linear
interpolation, which would handle both problems.
Let's just implement that!
Take pairs of points from the brightness-levels array and linearly
interpolate between them. On the X axis (what userspace sees) we'll
now have equally sized intervals (num-interpolated-steps sized,
as opposed to before where we were at the mercy of quantization).
Signed-off-by: Alexandru Stan <amstan@chromium.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Trying to copy into the string fields with strncpy() gives a warning from
gcc. Both fields are part of a packed HDMI header and do not require a
terminating \0 character.
../drivers/video/hdmi.c: In function 'hdmi_spd_infoframe_init':
../drivers/video/hdmi.c:230:2: warning: 'strncpy' specified bound 8 equals destination size [-Wstringop-truncation]
230 | strncpy(frame->vendor, vendor, sizeof(frame->vendor));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/video/hdmi.c:231:2: warning: 'strncpy' specified bound 16 equals destination size [-Wstringop-truncation]
231 | strncpy(frame->product, product, sizeof(frame->product));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Just use memcpy() instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021121241.17623-1-tzimmermann@suse.de
Pull x86 fixes from Thomas Gleixner:
"A couple of x86 fixes which missed rc1 due to my stupidity:
- Drop lazy TLB mode before switching to the temporary address space
for text patching.
text_poke() switches to the temporary mm which clears the lazy mode
and restores the original mm afterwards. Due to clearing lazy mode
this might restore a already dead mm if exit_mmap() runs in
parallel on another CPU.
- Document the x32 syscall design fail vs. syscall numbers 512-547
properly.
- Fix the ORC unwinder to handle the inactive task frame correctly.
This was unearthed due to the slightly different code generation of
gcc-10.
- Use an up to date screen_info for the boot params of kexec instead
of the possibly stale and invalid version which happened to be
valid when the kexec kernel was loaded"
* tag 'x86-urgent-2020-10-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternative: Don't call text_poke() in lazy TLB mode
x86/syscalls: Document the fact that syscalls 512-547 are a legacy mistake
x86/unwind/orc: Fix inactive tasks with stack pointer in %sp on GCC 10 compiled kernels
hyperv_fb: Update screen_info after removing old framebuffer
x86/kexec: Use up-to-dated screen_info copy to fill boot params
The open-coded list_for_each_entry() causes a harmless warning:
drivers/video/fbdev/matrox/matroxfb_base.c: In function 'matroxfb_register_driver':
include/linux/kernel.h:856:3: warning: array subscript -98 is outside array bounds of 'struct list_head[1]' [-Warray-bounds]
Use the normal list_for_each_entry instead.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201026194010.3817166-1-arnd@kernel.org
Pull ARM SoC platform updates from Olof Johansson:
"SoC changes, a substantial part of this is cleanup of some of the
older platforms that used to have a bunch of board files.
In particular:
- Remove non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP
platforms, moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
There are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones are:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
ARM: mstar: Select MStar intc
ARM: stm32: Replace HTTP links with HTTPS ones
ARM: debug: add UART early console support for SD5203
ARM: hisi: add support for SD5203 SoC
ARM: omap3: enable off mode automatically
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: imx: Remove remnant board file support pieces
...
This patch fixes the issue due to:
[ 89.572883] divide_error: 0000 [#1] SMP KASAN PTI
[ 89.572897] CPU: 3 PID: 16083 Comm: repro Not tainted 5.9.0-rc7.20200930.rc1.allarch-19-g3e32d0d.syzk #5
[ 89.572902] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
[ 89.572934] RIP: 0010:cirrusfb_check_var+0x84/0x1260
The error happens when the pixels value is calculated before performing the sanity checks on bits_per_pixel.
A bits_per_pixel set to zero causes divide by zero error.
This patch moves the calculation after the sanity check.
Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Tested-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Reviewed-by: Thomas Zimemrmann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021235758.59993-1-saeed.mirzamohammadi@oracle.com
