Provide an interface to read the negotiated features. This is needed
when building the netlink message in vdpa_dev_net_config_fill().
Also fix the implementation of vdpa_dev_net_config_fill() to use the
negotiated features instead of the device features.
To make APIs clearer, make the following name changes to struct
vdpa_config_ops so they better describe their operations:
get_features -> get_device_features
set_features -> set_driver_features
Finally, add get_driver_features to return the negotiated features and
add implementation to all the upstream drivers.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220105114646.577224-2-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The system will crash if we put an uninitialized iova_domain, this
could happen when an error occurs before initializing the iova_domain
in vdpasim_create().
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:__cpuhp_state_remove_instance+0x96/0x1c0
...
Call Trace:
<TASK>
put_iova_domain+0x29/0x220
vdpasim_free+0xd1/0x120 [vdpa_sim]
vdpa_release_dev+0x21/0x40 [vdpa]
device_release+0x33/0x90
kobject_release+0x63/0x160
vdpasim_create+0x127/0x2a0 [vdpa_sim]
vdpasim_net_dev_add+0x7d/0xfe [vdpa_sim_net]
vdpa_nl_cmd_dev_add_set_doit+0xe1/0x1a0 [vdpa]
genl_family_rcv_msg_doit+0x112/0x140
genl_rcv_msg+0xdf/0x1d0
...
So we must make sure the iova_domain is already initialized before
put it.
In addition, we may get the following warning in this case:
WARNING: ... drivers/iommu/iova.c:344 iova_cache_put+0x58/0x70
So we must make sure the iova_cache_put() is invoked only if the
iova_cache_get() is already invoked. Let's fix it together.
Cc: stable@vger.kernel.org
Fixes: 4080fc1067 ("vdpa_sim: use iova module to allocate IOVA addresses")
Signed-off-by: Longpeng <longpeng2@huawei.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211124015215.119-1-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable user to set the mac address and mtu so that each vdpa device
can have its own user specified mac address and mtu.
Now that user is enabled to set the mac address, remove the module
parameter for same.
And example of setting mac addr and mtu and view the configuration:
$ vdpa mgmtdev show
vdpasim_net:
supported_classes net
$ vdpa dev add name bar mgmtdev vdpasim_net mac 00:11:22:33:44:55 mtu 9000
$ vdpa dev config show
bar: mac 00:11:22:33:44:55 link up link_announce false mtu 9000
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-6-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
$ vdpa dev add name bar mgmtdev vdpasim_net mac 00:11:22:33:44:55 mtu 9000
$ vdpa dev config show
bar: mac 00:11:22:33:44:55 link up link_announce false mtu 9000
$ vdpa dev config show -jp
{
"config": {
"bar": {
"mac": "00:11:22:33:44:55",
"link ": "up",
"link_announce ": false,
"mtu": 9000,
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-5-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
This patch introduces an attribute for vDPA device to indicate
whether virtual address can be used. If vDPA device driver set
it, vhost-vdpa bus driver will not pin user page and transfer
userspace virtual address instead of physical address during
DMA mapping. And corresponding vma->vm_file and offset will be
also passed as an opaque pointer.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-11-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch extends the vdpa_vq_state to support packed virtqueue
state which is basically the device/driver ring wrap counters and the
avail and used index. This will be used for the virito-vdpa support
for the packed virtqueue and the future vhost/vhost-vdpa support for
the packed virtqueue.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210602021536.39525-2-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Enable the user to create vDPA block simulator devices using the
vdpa management tool:
# Show vDPA supported devices
$ vdpa mgmtdev show
vdpasim_blk:
supported_classes block
# Create a vDPA block device named as 'blk0' from the management
# device vdpasim:
$ vdpa dev add mgmtdev vdpasim_blk name blk0
# Show the info of the 'blk0' device just created
$ vdpa dev show blk0 -jp
{
"dev": {
"blk0": {
"type": "block",
"mgmtdev": "vdpasim_blk",
"vendor_id": 0,
"max_vqs": 1,
"max_vq_size": 256
}
}
}
# Delete the vDPA device after its use
$ vdpa dev del blk0
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-15-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This will allow running vDPA for virtio block protocol.
It's a preliminary implementation with a simple request handling:
for each request, only the status (last byte) is set.
It's always set to VIRTIO_BLK_S_OK.
Also input validation is missing and will be added in the next commits.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
[sgarzare: various cleanups/fixes]
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-12-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vringh_getdesc_iotlb() allocates memory to store the kvec, that
is freed with vringh_kiov_cleanup().
vringh_getdesc_iotlb() is able to reuse a kvec previously allocated,
so in order to avoid to allocate the kvec for each request, we are
not calling vringh_kiov_cleanup() when we finished to handle a
request, but we should call it when we free the entire device.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-8-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Usually iotlb accesses are synchronized with a spinlock.
Let's request it as a new parameter in vringh_set_iotlb() and
hold it when we navigate the iotlb in iotlb_translate() to avoid
race conditions with any new additions/deletions of ranges from
the ioltb.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-3-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The identical mapping used until now created issues when mapping
different virtual pages with the same physical address.
To solve this issue, we can use the iova module, to handle the IOVA
allocation.
For simplicity we use an IOVA allocator with byte granularity.
We add two new functions, vdpasim_map_range() and vdpasim_unmap_range(),
to handle the IOVA allocation and the registration into the IOMMU/IOTLB.
These functions are used by dma_map_ops callbacks.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-2-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable user to create vdpasim net simulate devices.
Show vdpa management device that supports creating, deleting vdpa devices.
$ vdpa mgmtdev show
vdpasim_net:
supported_classes
net
$ vdpa mgmtdev show -jp
{
"show": {
"vdpasim_net": {
"supported_classes": {
"net"
}
}
}
Create a vdpa device of type networking named as "foo2" from
the management device vdpasim:
$ vdpa dev add mgmtdev vdpasim_net name foo2
Show the newly created vdpa device by its name:
$ vdpa dev show foo2
foo2: type network mgmtdev vdpasim_net vendor_id 0 max_vqs 2 max_vq_size 256
$ vdpa dev show foo2 -jp
{
"dev": {
"foo2": {
"type": "network",
"mgmtdev": "vdpasim_net",
"vendor_id": 0,
"max_vqs": 2,
"max_vq_size": 256
}
}
}
Delete the vdpa device after its use:
$ vdpa dev del foo2
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210105103203.82508-7-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vringh_getdesc_iotlb() manages 2 iovs for writable and readable
descriptors. This is very useful for the block device, where for
each request we have both types of descriptor.
Let's split the vdpasim_virtqueue's iov field in out_iov and
in_iov to use them with vringh_getdesc_iotlb().
We are using VIRTIO terminology for "out" (readable by the device)
and "in" (writable by the device) descriptors.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-18-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The get_config callback can be used by the device to fill the
config structure.
The callback will be invoked in vdpasim_get_config() before copying
bytes into caller buffer.
Move vDPA-net config updates from vdpasim_set_features() in the
new vdpasim_net_get_config() callback.
This is safe since in vdpa_get_config() we already check that
.set_features() callback is called before .get_config().
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-13-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull vhost fixes from Michael Tsirkin:
"Fixes all over the place.
A new UAPI is borderline: can also be considered a new feature but
also seems to be the only way we could come up with to fix addressing
for userspace - and it seems important to switch to it now before
userspace making assumptions about addressing ability of devices is
set in stone"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpasim: allow to assign a MAC address
vdpasim: fix MAC address configuration
vdpa: handle irq bypass register failure case
vdpa_sim: Fix DMA mask
Revert "vhost-vdpa: fix page pinning leakage in error path"
vdpa/mlx5: Fix error return in map_direct_mr()
vhost_vdpa: Return -EFAULT if copy_from_user() fails
vdpa_sim: implement get_iova_range()
vhost: vdpa: report iova range
vdpa: introduce config op to get valid iova range
vdpa_sim generates a ramdom MAC address but it is never used by upper
layers because the VIRTIO_NET_F_MAC bit is not set in the features list.
Because of that, virtio-net always regenerates a random MAC address each
time it is loaded whereas the address should only change on vdpa_sim
load/unload.
Fix that by adding VIRTIO_NET_F_MAC in the features list of vdpa_sim.
Fixes: 2c53d0f64c ("vdpasim: vDPA device simulator")
Cc: jasowang@redhat.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://lore.kernel.org/r/20201029122050.776445-2-lvivier@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Split out all the bits that are purely for dma_map_ops implementations
and related code into a new <linux/dma-map-ops.h> header so that they
don't get pulled into all the drivers. That also means the architecture
specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h>
any more, which leads to a missing includes that were pulled in by the
x86 or arm versions in a few not overly portable drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
