Pull media fixes from Mauro Carvalho Chehab:
- some fixes at si2157 tuning logic
- a warning fix on atomisp when used with clang
* tag 'media/v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: si2157: add support for DVB-C Annex C
media: si2157: fix bandwidth stored in dev
media: si2157: fix 6MHz & 6.1MHz bandwidth setting
media: atomisp: Do not define input_system_cfg2400_t twice
Pull device properties framework updates from Rafael Wysocki:
"These update the handling of software nodes and graph properties, and
the MAINTAINERS entry for the former.
Specifics:
- Remove device_add_properties() which does not work correctly if
software nodes holding additional device properties are shared or
reused (Heikki Krogerus).
- Fix nargs_prop property handling for software nodes (Clément
Léger).
- Update documentation of ACPI device properties (Sakari Ailus).
- Update the handling of graph properties in the generic framework to
match the DT case (Sakari Ailus).
- Update software nodes entry in MAINTAINERS (Andy Shevchenko)"
* tag 'devprop-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
software node: Update MAINTAINERS data base
software node: fix wrong node passed to find nargs_prop
device property: Drop fwnode_graph_get_remote_node()
device property: Use fwnode_graph_for_each_endpoint() macro
device property: Implement fwnode_graph_get_endpoint_count()
Documentation: ACPI: Update references
Documentation: ACPI: Fix data node reference documentation
device property: Fix documentation for FWNODE_GRAPH_DEVICE_DISABLED
device property: Fix fwnode_graph_devcon_match() fwnode leak
device property: Remove device_add_properties() API
driver core: Don't call device_remove_properties() from device_del()
PCI: Convert to device_create_managed_software_node()
Pull media updates from Mauro Carvalho Chehab:
- New sensor driver: ov5693
- A new driver for STM32 Chrom-ART Accelerator
- Added V4L2 core helper functions for VP9 codec
- Hantro driver has gained support for VP9 codecs
- Added support for Maxim MAX96712 Quad GMSL2 Deserializer
- The staging atomisp driver has gained lots of improvements, fixes and
cleanups. It now works with userptr
- Lots of random driver improvements as usual
* tag 'media/v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (397 commits)
media: ipu3-cio2: Add support for instantiating i2c-clients for VCMs
media: ipu3-cio2: Call cio2_bridge_init() before anything else
media: ipu3-cio2: Defer probing until the PMIC is fully setup
media: hantro: Add support for Allwinner H6
media: dt-bindings: allwinner: document H6 Hantro G2 binding
media: hantro: Convert imx8m_vpu_g2_irq to helper
media: hantro: move postproc enablement for old cores
media: hantro: vp9: add support for legacy register set
media: hantro: vp9: use double buffering if needed
media: hantro: add support for reset lines
media: hantro: Fix probe func error path
media: i2c: hi846: use pm_runtime_force_suspend/resume for system suspend
media: i2c: hi846: check return value of regulator_bulk_disable()
media: hi556: Support device probe in non-zero ACPI D state
media: ov5675: Support device probe in non-zero ACPI D state
media: imx208: Support device probe in non-zero ACPI D state
media: ov2740: support device probe in non-zero ACPI D state
media: ov5670: Support device probe in non-zero ACPI D state
media: ov8856: support device probe in non-zero ACPI D state
media: ov8865: Disable only enabled regulators on error path
...
When CONFIG_VIDEO_ATOMISP_ISP2401 is disabled, clang warns:
./drivers/staging/media/atomisp//pci/isp2400_input_system_local.h:32:40:
error: redefinition of typedef 'input_system_cfg2400_t' is a C11 feature
[-Werror,-Wtypedef-redefinition]
typedef struct input_system_cfg2400_s input_system_cfg2400_t;
^
./drivers/staging/media/atomisp//pci/input_system_local.h:22:40: note:
previous definition is here
typedef struct input_system_cfg2400_s input_system_cfg2400_t;
^
1 error generated.
input_system_cfg2400_t's typedef was copied from
isp2400_input_system_local.h to input_system_local.h, rather than moved.
Remove the one in isp2400_input_system_local.h so that there is no more
warning, which can break the build under -Werror.
Link: https://github.com/ClangBuiltLinux/linux/issues/1557
Link: https://lore.kernel.org/linux-media/20211227164243.2329724-1-nathan@kernel.org
Fixes: 4005ecee61 ("media: atomisp: shift some structs from input_system_local")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
fwnode_graph_get_remote_node() is only used by the tegra-video driver.
Convert it to use newer fwnode_graph_get_endpoint_by_id() and drop
now-unused fwnode_graph_get_remote_node().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some older G2 cores uses slightly different register set for HEVC and
VP9. Since vast majority of registers and logic is the same, it doesn't
make sense to introduce another drivers.
Add legacy_regs quirk and implement only VP9 changes for now. HEVC
changes will be introduced later, if needed.
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some G2 variants need double buffering to be enabled in order to work
correctly, like that found in Allwinner H6 SoC.
Add platform quirk for that.
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If clocks for some reason couldn't be enabled, probe function returns
immediately, without disabling PM. This obviously leaves PM ref counters
unbalanced.
Fix that by jumping to appropriate error path, so effects of PM functions
are reversed.
Fixes: 775fec6900 ("media: add Rockchip VPU JPEG encoder driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
While parsing the RAW AWB metadata, the AWB layout was missing to fully
understand which byte corresponds to which feature. Make the field names
and usage explicit, as it is used by the userspace applications.
[Sakari Ailus: Changed wording of sat_ratio field as per review comments,
fixed a whitespace issue.]
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
hantro_v4l2.c includes media/videobuf2-dma-sg.h, which isn't used.
And in fact, hantro doesn't use the vb2_dma_sg_memops at all, so this
is confusing. Just drop both videobuf2 headers, they are not needed here.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The JPEG encoder found in the Hantro H1 encoder block only produces a
raw entropy-encoded scan. The driver is responsible for building a JPEG
compliant bitstream and placing the entropy-encoded scan in it. Right
now the driver uses a bounce buffer for the hardware to output the raw
scan to.
In commit e765dba11e ("hantro: Move hantro_enc_buf_finish to JPEG
codec_ops.done"), the code that copies the raw scan from the bounce
buffer to the capture buffer was moved, but was only hooked up for the
Hantro H1 (then RK3288) variant. The RK3399 variant was broken,
producing a JPEG bitstream without the scan, and the capture buffer's
.bytesused field unset.
Fix this by duplicating the code that is executed when the JPEG encoder
finishes encoding a frame. As the encoded length is read back from
hardware, and the variants having different register layouts, the
code is duplicated rather than shared.
Fixes: e765dba11e ("hantro: Move hantro_enc_buf_finish to JPEG codec_ops.done")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix following boolreturn.cocci warning:
./drivers/staging/media/imx/imx-media-csi.c:153:9-10: WARNING:
return of 0/1 in function 'requires_passthrough' with return
type bool.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Register misc device in the end of driver's probing since device should
become visible to userspace once driver is fully prepared. Do the opposite
in case of driver removal. This is a minor improvement that doesn't solve
any problem, but makes code more consistent.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tegra114 and Tegra124 support reference picture marking, which will
cause BSEV to write picture marking data to SDRAM. Make sure there is
a valid destination address for that data to avoid error messages from
the memory controller.
[digetx@gmail.com: added BO support and moved secure BO allocation to kernel]
Tested-by: Anton Bambura <jenneron@protonmail.com> # T114 ASUS TF701T
Signed-off-by: Thierry Reding <treding@nvidia.com>
Co-developed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
On a system with multiple encoders present, it's possible for two
encoders to write to the global luma and chroma quantization tables at
the same time if they both submit a JPEG frame to be encoded. Avoid
this race by moving the tables into the `jpeg_ctx` structure which is
stored on the stack.
Signed-off-by: James Cowgill <james.cowgill@blaize.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The G2 decoder block produces NV12 4x4 tiled format (NV12_4L4).
Enable the G2 post-processor block, in order to produce regular NV12.
The logic in hantro_postproc.c is leveraged to take care of allocating
the extra buffers and configure the post-processor, which is
significantly simpler than the one on the G1.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The G2 core decoder engine produces NV12_4L4 format,
which is a simple NV12 4x4 tiled format. The driver currently
hides this format by always enabling the post-processor engine,
and therefore offering NV12 directly.
This is done without using the logic in hantro_postproc.c
and therefore makes it difficult to add VP9 cleanly.
Since fixing this is not easy, add a small quirk to force
NV12 if HEVC was configured, but otherwise declare NV12_4L4
as the pixel format in imx8mq_vpu_g2_variant.dec_fmts.
This will be used by the VP9 decoder which will be added soon.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a 'postprocessed' boolean property to struct hantro_fmt
to signal that a format is produced by the post-processor.
This will allow to introduce the G2 post-processor in a simple way.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Turns out the post-processor block on the G2 core is substantially
different from the one on the G1 core. Introduce hantro_postproc_ops
with .enable and .disable methods, which will allow to support
the G2 post-processor cleanly.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When the post-processor hardware block is enabled, the driver
allocates an internal queue of buffers for the decoder enginer,
and uses the vb2 queue for the post-processor engine.
For instance, on a G1 core, the decoder engine produces NV12 buffers
and the post-processor engine can produce YUY2 buffers. The decoder
engine expects motion vectors to be appended to the NV12 buffers,
but this is only required for CODECs that need motion vectors,
such as H.264.
Fix the post-processor logic accordingly.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The logic there is meant to be used by newer firmwares.
clean it up, in order to make compatible with the chosen
firmware version.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It doesn't make sense to have a control for that. Besides that,
the Intel Aero implementation doesn't have, which means that
even the custom control is not used in practice, at least
outside Android.
So, get rid of it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Change some recovery logic at the driver, in order to make it
more compatible with ISP2401 Intel Aero firmware.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
