Stop the OS from re-discovering multiple LUNs for tape drive and medium
changer.
Duplicate device nodes for Ultrium tape drive and medium changer are being
created.
The Ultrium tape drive is a multi-LUN SCSI target. It presents a LUN for
the tape drive and a 2nd LUN for the medium changer. Our controller FW
lists both LUNs in the RPL results.
As a result, the smartpqi driver exposes both devices to the OS. Then the
OS does its normal device discovery via the SCSI REPORT LUNS command, which
causes it to re-discover both devices a 2nd time, which results in the
duplicate device nodes.
Link: https://lore.kernel.org/r/20210928235442.201875-10-don.brace@microchip.com
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Send a TEST UNIT READY to HBA disks and do not present them to the OS if
0x02/0x04/0x1b (SANITIZE IN PROGRESS) is returned.
During boot-up, some OSes appear to hang when there are one or more disks
undergoing a sanitize operation.
According to SCSI SBC4 specification section 4.11.2 "Commands allowed
during SANITIZE", some SCSI commands are permitted, but read/write
operations are not.
When the OS attempts to read the disk partition table a CHECK CONDITION ASC
0x04 ASCQ 0x1b is returned which causes the OS to retry the read until
SANITIZE has completed. This can take hours.
According to document HPE Smart Storage Administrator User Guide, during
the sanitize erase operation, the drive is unusable. I.e. the expected
behavior for SANITIZE is the that disk remains offline even after SANITIZE
has completed. The customer is expected to re-enable the disk using the
management utility.
Link: https://lore.kernel.org/r/20210928235442.201875-6-don.brace@microchip.com
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enhance check for commands queued to the controller. Add new function
pqi_nonempty_inbound_queue_count() that will wait for all I/O queued for
submission to controller across all queue groups to drain. Add helper
functions to obtain queue command counts for each queue group. These
queues should drain quickly as they are already staged to be submitted down
to the controller's IB queue.
Enhance check for outstanding command completion. Update the count of
outstanding commands while waiting. This value was not re-obtained and was
potentially causing infinite wait for all completions.
Link: https://lore.kernel.org/r/20210928235442.201875-5-don.brace@microchip.com
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct kdump hangs when controller is locked up.
There are occasions when a controller reboot (controller soft reset) is
issued when a controller firmware crash dump is in progress.
This leads to incomplete controller firmware crash dump:
- When the controller crash dump is in progress, and a kdump is initiated,
the driver issues inbound doorbell reset to bring back the controller in
SIS mode.
- If the controller is in locked up state, the inbound doorbell reset does
not work causing controller initialization failures. This results in the
driver hanging waiting for SIS mode.
To avoid an incomplete controller crash dump, add in a controller crash
dump handshake:
- Controller will indicate start and end of the controller crash dump by
setting some register bits.
- Driver will look these bits when a kdump is initiated. If a controller
crash dump is in progress, the driver will wait for the controller crash
dump to complete before issuing the controller soft reset then complete
driver initialization.
Link: https://lore.kernel.org/r/20210928235442.201875-3-don.brace@microchip.com
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for ZTE RM241-18i 2G device ID:
VID_9005, DID_028F, SVID_1CF2 and SDID_5445
Add support for ZTE RM242-18i 4G device ID:
VID_9005, DID_028F, SVID_1CF2 and SDID_5446
Add support for ZTE RM243-18i device ID:
VID_9005, DID_028F, SVID_1CF2 and SDID_5447
Add support for ZTE SDPSA/B-18i 4G device ID:
VID_9005, DID_028F, SVID_1CF2 and SDID_0B27
Add support for ZTE SDPSA/B_I-18i device ID:
VID_9005, DID_028F, SVID_1CF2 and SDID_0B29
Add support for ZTE SDPSA/B_L-18i 2G device ID:
VID_9005, DID_028F, SVID_1CF2 and SDID_0B45
Link: https://lore.kernel.org/r/20210714182847.50360-8-don.brace@microchip.com
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Balsundar P <balsundar.p@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, target, tcmu,
smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx).
The major core change is using a sbitmap instead of an atomic for
queue tracking"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (412 commits)
scsi: target: tcm_fc: Fix a kernel-doc header
scsi: target: Shorten ALUA error messages
scsi: target: Fix two format specifiers
scsi: target: Compare explicitly with SAM_STAT_GOOD
scsi: sd: Introduce a new local variable in sd_check_events()
scsi: dc395x: Open-code status_byte(u8) calls
scsi: 53c700: Open-code status_byte(u8) calls
scsi: smartpqi: Remove unused functions
scsi: qla4xxx: Remove an unused function
scsi: myrs: Remove unused functions
scsi: myrb: Remove unused functions
scsi: mpt3sas: Fix two kernel-doc headers
scsi: fcoe: Suppress a compiler warning
scsi: libfc: Fix a format specifier
scsi: aacraid: Remove an unused function
scsi: core: Introduce enum scsi_disposition
scsi: core: Modify the scsi_send_eh_cmnd() return value for the SDEV_BLOCK case
scsi: core: Rename scsi_softirq_done() into scsi_complete()
scsi: core: Remove an incorrect comment
scsi: core: Make the scsi_alloc_sgtables() documentation more accurate
...
OFA, Online Firmware Activation, allows users to update firmware without a
reboot.
- Change OFA setup to a worker thread
- Delay soft resets
- Add OFA event handler to allow FW to initiate OFA
- Add in-memory allocation to OFA events
- Update OFA buffer size calculations
- Add ability to cancel OFA events
- Update OFA quiesce/un-quiesce
- Prevent Kernel crashes while issuing ioctl during OFA
- Returned EBUSY for pass-through IOCTLs throughout all stages of OFA
- Add mutex to prevent parallel OFA updates.
Link: https://lore.kernel.org/r/161549381563.25025.2647205502550052197.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cleanup soft reset code for Online Firmware Activation (OFA). OFA allows
controller firmware updates without a reboot.
OFA updates require an on-line controller reset to activate the updated
firmware. There were some missing actions for some of the reset cases. The
controller is first set back to sis mode before returning to pqi mode.
Check to ensure the controller is in sis mode.
Release QRM memory (OFA buffer) on OFA error conditions. Clean up
controller state which can cause a kernel panic upon reboot after an
unsuccessful OFA.
Link: https://lore.kernel.org/r/161549379215.25025.10654441314249183621.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Allow R5/R6 stream detection to be disabled/enabled using sysfs entry
enable_stream_detection.
Example usage:
lsscsi
[2:2:0:0] storage Adaptec 3258P-32i /e 0010
^
|
+---- NOTE: here host is host2
find /sys -name \*enable_stream\*
/sys/devices/pci0000:36/0000:36:00.0/0000:37:00.0/0000:38:00.0/0000:39:00.0/host2/scsi_host/host2/enable_stream_detection
/sys/devices/pci0000:5b/0000:5b:00.0/0000:5c:00.0/host3/scsi_host/host3/enable_stream_detection
Current stream detection:
cat /sys/devices/pci0000:36/0000:36:00.0/0000:37:00.0/0000:38:00.0/0000:39:00.0/host2/scsi_host/host2/enable_stream_detection
1
Turn off stream detection:
echo 0 > /sys/devices/pci0000:36/0000:36:00.0/0000:37:00.0/0000:38:00.0/0000:39:00.0/host2/scsi_host/host2/enable_stream_detection
Turn on stream detection:
echo 1 > /sys/devices/pci0000:36/0000:36:00.0/0000:37:00.0/0000:38:00.0/0000:39:00.0/host2/scsi_host/host2/enable_stream_detection
Link: https://lore.kernel.org/r/161549376281.25025.1132304698441513738.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enhance performance by adding sequential stream detection for RAID5/RAID6
sequential write requests. Reduce stripe lock contention with full-stripe
write operations.
There is one common stripe lock for each RAID volume that can be set by
either the RAID engine or the AIO engine. The AIO path has I/O request
sizes well below the stripe size resulting in many Read-Modify-Write
operations.
Sending the request to the RAID engine allows for coalescing requests into
full stripe operations resulting in reduced Read-Modify-Write operations.
Link: https://lore.kernel.org/r/161549375693.25025.2962141451773219796.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
