leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1,072,166 Commits 2 Branches 0 Tags
c717993dd76a1049093af5c262e751d901b8da10
Commit Graph

6 Commits

Author SHA1 Message Date
David Mosberger-Tang
b530d5f39c wilc1000: Improve WILC TX performance when power_save is off 
The wakeup and sleep commands need to be sent to the WILC chip only
when it is in power save mode (PSM, as controlled by "iw dev wlan0 set
power_save on/off").  The commands are relatively costly, so it pays
to skip them when possible.

iperf3 without this patch (no significant different with PSM on/off):
  TX   0.00-120.01 sec   140 MBytes  9.82 Mbits/sec
  RX   0.00-120.69 sec   283 MBytes  19.6 Mbits/sec

with this patch applied:

PSM off (TX is 46% improved, RX slightly improved; may not be significant):
  TX   0.00-120.00 sec   206 MBytes  14.4 Mbits/sec
  RX   0.00-120.48 sec   322 MBytes  22.4 Mbits/sec

PSM on (no significant change):
  TX   0.00-120.00 sec   140 MBytes  9.78 Mbits/sec
  RX   0.00-120.08 sec   257 MBytes  18.0 Mbits/sec

Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211210203016.3680425-2-davidm@egauge.net
 2021-12-16 10:30:21 +02:00
David Mosberger-Tang
f92b9f9674 wilc1000: Fix copy-and-paste typo in wilc_set_mac_address 
The messages appears to have been copied from wilc_get_mac_address and
says "get" when it should say "set".

Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211206232709.3192856-2-davidm@egauge.net
 2021-12-14 20:42:33 +02:00
Ajay Singh
0ec5408cd4 wilc1000: add new WID to pass wake_enable information to firmware 
Add new WID(WID_WOWLAN_TRIGGER) to send wake_enable information to firmware.
In 'set_wakeup' cfg80211_ops callback, the enable information was not
passed to firmware which is required to handle WOWLan trigger notification
from firmware.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210916164902.74629-4-ajay.kathat@microchip.com
 2021-09-21 18:08:15 +03:00
Ajay Singh
c8e2036ee9 wilc1000: move 'deinit_lock' lock init/destroy inside module probe 
Move initialization & deinitialization of 'deinit_lock' mutex lock inside
wlan_init_locks() & wlan_deinit_locks() API's respectively alongside other
locks. After the movement, the client count variable(client_count) which is
used for lock init/deinit is removed.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210916164902.74629-2-ajay.kathat@microchip.com
 2021-09-21 18:08:14 +03:00
Ajay Singh
c04fabacb7 wilc1000: added 'ndo_set_mac_address' callback support 
Added support for 'ndo_set_mac_address call' callback to allow change of
interface MAC address.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201125114059.10006-2-ajay.kathat@microchip.com
 2020-12-02 21:38:07 +02:00
Ajay Singh
5625f965d7 wilc1000: move wilc driver out of staging 
WILC1000 is an IEEE 802.11 b/g/n IoT link controller module. The
WILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other
processors with minimal resource requirements with a simple
SPI/SDIO-to-Wi-Fi interface.

WILC1000 driver has been part of staging for few years. With
contributions from the community, it has improved significantly. Full
driver review has helped in achieving the current state.
The details for those reviews are captured in 1 & 2.

[1]. https://lore.kernel.org/linux-wireless/1537957525-11467-1-git-send-email-ajay.kathat@microchip.com/
[2]. https://lore.kernel.org/linux-wireless/1562896697-8002-1-git-send-email-ajay.kathat@microchip.com/

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
 2020-06-26 08:46:46 +03:00