Scrubbing memory after every unmap is very costly in terms of
performance. If a user wants it he can enable it but the default
should prioritize performance.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As iATU configuration is done by FW, driver should not try and
move HBM bar.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reading of GIC privileged status will be done after F/W is loaded,
because privileged GIC capability is only available with the correct
ARMCP version, and after it's loaded.
Such versions necessarily support COMMS, so GIC alternatives (SP regs)
will be read directly from dynamic regs.
As well, initiation of DMA QMANs will occur after F/W is loaded
since it depends on GIC configuration.
In case F/W isn't loaded there's no problem since either way
there won't be any GIC IRQ handling.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Fix issue in which the input to the function is_asic_secured was device
PCI_IDS number instead of the asic_type enumeration.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
LKD should provide hard reset cause to preboot prior to
loading any FW components (in case needed).
Current implementation is based on the new FW 'COMMS' protocol
In cased 'COMMS' is disabled - reset cause won't be sent.
Currently, only 2 reset causes are shared: HEARTBEAT & TDR.
Sending the reset cause will provide the missing watchdog
info that the firmware needs to provide to the BMC.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
An information print notifying on starting to load the f/w was removed
by mistake when moving to the new dynamic f/w loading mechanism.
Restore that print as the F/W loading usually takes between 10 to 20
seconds and this print helps the user know the status of the driver
load.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Due to new security restrictions, GIC controller can no
longer be accessed from user/kernel.
To monitor that, a new status bit will be read from preboot
caps, indicating whether direct access to GIC is blocked.
In case it is blocked, driver will use scratchpad registers
instead of using GIC interface on two main scenarios:
The first of which LKD triggers interrupts to F/W through GIC,
and the second of when LKD configures all engines/QMANs
to write to GIC when they want to report an error.
From F/W perspective, it will poll on all SPs, and once IRQ
number is retrieved, SP register is cleared, and it will perform the
write to the GIC to trigger the IRQ handler.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Maintain both STS1 and ERR1 registers used for status communication
with F/W.
Those are not maintained as we currently have less than 31
statuses/error defined and so LKD did not refer to those register.
The reason to read them now is to try to support future f/w versions
with current driver.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When attempting to read FW component's version we should break if input
FW component is invalid in order to avoid using uninitialized
destination pointer.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When setting "DMA mask from FW" we are reading PSOC_GLOBAL_CONF register
which is allowed only once FW has done it's iATU configuration.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Some users might want to implement their own policy of when the device
is unusable so we need to ignore this status in the driver and continue
loading as normal.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Implementing dynamic linux image load to the device.
This patch also implements the FW communication steps during the
boot-fit.
This patch also enables the dynamic protocol based on the compatibility
flag.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Implementing dynamic boot fit image load to the device.
Note that some necessary adjustment were added to the static loader as
well so that both loaders can co-exist.
as this is not the final FW load stage the dynamic FW load is still
forced to be non functional.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Hint address failure that results in a valid mapping with an address
that was allocated by the driver is not a real failure.
Therefore, the driver shouldn't notify about this in kernel log. The
user is responsible to check the returned address.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Indicate "progress" instead of "error" when reporting progress status.
Change "u-boot stopped by user" to "Cannot boot" message as
CPU_BOOT_STATUS_UBOOT_NOT_READY may indicate a fatal error that prevent
u-boot from loading firmware.
Signed-off-by: Guy Nisan <gnisan@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
iATU (internal Address Translation Unit of the PCI controller)
configuration is being done by FW right after driver enables
the PCI device. Hence, driver must add a minor sleep afterwards
in order to make sure FW finishes configuring iATU regions.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Update the common and GAUDI firmware header files to the latest version.
The latest version use the correct endianness types so this commit also
contains minor changes to the code to use the correct conversions when
reading/writing to the firmware structures.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
LKD has interfaces in which it receives device address.
For instance the debugfs_read/write variants receives device address for
CFG/SRAM/DRAM for read/write and need to translate to the mapped PCI BAR
address.
In addition, the dynamic FW load protocol dictates that the address to
which the LKD will copy the image for the next FW component will be
received as a device address and can be placed either in SRAM or DRAM.
We need to distinguish those regions as the access methods to those
regions are different (in DRAM we possibly need to set the BAR base).
Looking forward this code will be used to remove duplicated code in the
debugfs_read/write that search the memory region for the input device
address.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
First stage of the dynamic FW load protocol is to reset the protocol to
avoid residues from former load cycles.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Instead of using multiple ASIC specific copies of functions to read the
FW version use single common one that gets ASIC specific arguments.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Use mmu cache range invalidation instead of entire cache invalidation
because it yields better performance.
In GOYA and GAUDI, always use entire cache invalidation because these
ASICs don't support range invalidation.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Replace multiple arguments to init device CPU function by passing
firmware loader managing structure that is initialized per ASIC with
the loader parameters.
In addition, the FW loader management structure is now part of the
habanalabs device, this way the loader parameters will be able to be
communicated across various boot stages.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This refactor is needed due to the dynamic FW load in which requesting
the FW file (and getting its attributes) is not immediately followed by
copying FW file content.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Start the skeleton for the dynamic F/W load by marking current preboot
code path as legacy.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
On PLDM, in case of NIC hangs, the ELBI reset to take much longer than
expected. As a result an increase in the ELBI reset timeout is required.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Starting from iLO ASIC 'Neches' with subsystem device id 0x00E4,
bar 5 is used for shared memory region mapping instead of bar 2
because bar 2 is made inaccessible after system POST for security
reason.
As this holds true for future iLO ASIC generations, it does not
make sense to map shared memory region according to the subsystem
device id of each following generations.
Map iLO shared memory region with PCI revision id that maps to the
iLO ASIC generation, starting from Neches (Rev 7).
Signed-off-by: Matt Hsiao <matt.hsiao@hpe.com>
Link: https://lore.kernel.org/r/20210531085551.26421-1-matt.hsiao@hpe.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull char/misc driver fixes from Greg KH:
"Here are some tiny char/misc driver fixes for 5.13-rc4.
Nothing huge here, just some tiny fixes for reported issues:
- two interconnect driver fixes
- kgdb build warning fix for gcc-11
- hgafb regression fix
- soundwire driver fix
- mei driver fix
All have been in linux-next with no reported issues"
* tag 'char-misc-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: request autosuspend after sending rx flow control
kgdb: fix gcc-11 warnings harder
video: hgafb: correctly handle card detect failure during probe
soundwire: qcom: fix handling of qcom,ports-block-pack-mode
interconnect: qcom: Add missing MODULE_DEVICE_TABLE
interconnect: qcom: bcm-voter: add a missing of_node_put()
