Unify variables related to device reset, which will help us to
add some new reset functionality in future patches.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Current sysfs implementation does not take endianness into
consideration when dumping the cpld version.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As we allow soft-reset to be performed only on inference devices,
having the sysfs nodes may cause a confusion. Hence, we remove those
nodes on training ASICs.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently sysfs support dumping a single infineon version, in
future asics we will have two infineon versions.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Changing the frequency automatically is only done in Goya. In future
ASICs this is done inside the firmware. Therefore, move the common code
into the Goya specific files.
Main changes as part of the commit are:
1. The thread for setting frequency is moved from device_late_init
to goya_late_init
2. hl_device_set_frequency is removed from hl_device_open as it is
not relevant for other ASICs and for Goya it is taken care by
the thread
3. hl_device_set_frequency is renamed as goya_set_frequency
Signed-off-by: Rajaravi Krishna Katta <rkatta@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Soft-reset is the procedure where we reset only the compute/DMA engines
of the device, without requiring the current user-space process to
release the device.
This type of reset can happen if TDR event occurred (a workload got
stuck) or by a root request through sysfs.
This is only relevant for inference ASICs, as there is no real-world
use-case to do that in training, because training runs on multiple
devices.
In addition, we also do (in certain ASICs) a reset upon device release.
That reset uses the same code as the soft-reset.
Therefore, to better differentiate between the two resets, it is better
to rename the soft-reset support as "inference soft-reset", to make
the code more self-explanatory.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
On init, the disabled state is cleared right before hw_init and that
causes the device to report on "Operational" state before the device
initialization is finished. Although the char device is not yet exposed
to the user at this stage, the sysfs entries are exposed.
This can cause errors in monitoring applications that use the sysfs
entries.
In order to avoid this, a new state "in device creation" is introduced
to ne reported when the device is not disabled but is still in init
flow.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We introduce a new type of reset which is reset upon device release.
This reset is very similar to soft reset except the fact it is
performed only upon device release and not upon user sysfs request
nor TDR.
The purpose of this reset is to make sure the device is returned to
IDLE state after the current user has finished working with the device.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently the user cannot interpret the PLL information based on index
as its exposed as an integer.
This commit exposes ASIC specific PLL indexes and maps it to a generic
FW compatible index.
Signed-off-by: Bharat Jauhari <bjauhari@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As F/ security indication must be available before driver approaches
PCI bus, F/W security should be derived from PCI id rather than be
fetched during boot handshake with F/W.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to use minimum of hard coded values common to LKD and F/W
a dynamic method to work with PLLs is introduced in this patch.
Formerly asic specific PLL numbering is now common for all asics.
To be backward compatible a bit in dev status is defined, if the bit is
not set LKD will keep working with old PLL numbering.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
if reset is due to heartbeat, device CPU is no responsive in which
case no point sending PCI disable message to it.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
F/W message returns 64bit value but up until now we casted it to
a 32bit variable, instead of receiving 64bit in the first place.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The new state indicates that device should be reset in order
to re-gain funcionality.
This unique state can occur if reset_on_lockup is disabled
and an actual lockup has occurred.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
ArmCP mandates that the device CPU is always an ARM processor, which might
be wrong in the future.
Most of this change is an internal renaming of variables, functions and
defines but there are two entries in sysfs which have armcp in their
names. Add identical cpucp entries but don't remove yet the armcp entries.
Those will be deprecated next year. Add the documentation about it in sysfs
documentation.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
In Gaudi, the default max power setting is different between PCI and PMC
cards. Therefore, the driver need to set the default after knowing what is
the card type.
The current code has a bug where it limits the maximum power of the PMC
card to 200W after a reset occurs.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This should resolve the merge/build issues reported when trying to
create linux-next.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Device is now enabled before the hw_init() because part of the
initialization requires communication with the device firmware to get
information that is required for the initialization itself
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
For internal needs of our CI we need to move all the common code into a
common folder instead of putting them in the root folder of the driver.
Same applies to the common header files under include/
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
