The shifting of the u8 integer info->map[i] the left will be promoted
to a 32 bit signed int and then sign-extended to a u64. In the event
that the top bit of the u8 is set then all then all the upper 32 bits
of the u64 end up as also being set because of the sign-extension.
Fix this by casting the u8 values to a u64 before the left shift. This
Link: https://lore.kernel.org/r/20210605122059.25105-1-colin.king@canonical.com
Addresses-Coverity: ("Unitentional integer overflow / bad shift operation")
Fixes: 3f49d68425 ("RDMA/irdma: Implement HW Admin Queue OPs")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
To avoid the following failure when trying to load the rdma_rxe module
while IPv6 is disabled, add a check for EAFNOSUPPORT and ignore the
failure, also delete the needless debug print from rxe_setup_udp_tunnel().
$ modprobe rdma_rxe
modprobe: ERROR: could not insert 'rdma_rxe': Operation not permitted
Fixes: dfdd6158ca ("IB/rxe: Fix kernel panic in udp_setup_tunnel")
Link: https://lore.kernel.org/r/20210603090112.36341-1-kamalheib1@gmail.com
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to prevent user space from modifying the index that belongs to
the kernel for shared queues let the kernel use a local copy of the index
and copy any new values of that index to the shared rxe_queue_bus struct.
This adds more switch statements which decreases the performance of the
queue API. Move the type into the parameter list for these functions so
that the compiler can optimize out the switch statements when the explicit
type is known. Modify all the calls in the driver on performance paths to
pass in the explicit queue type.
Link: https://lore.kernel.org/r/20210527194748.662636-4-rpearsonhpe@gmail.com
Link: https://lore.kernel.org/linux-rdma/20210526165239.GP1002214@@nvidia.com/
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Modify the queue APIs to protect all user space index loads with
smp_load_acquire() and all user space index stores with
smp_store_release(). Base this on the types of the queues which can be one
of ..KERNEL, ..FROM_USER, ..TO_USER. Kernel space indices are protected by
locks which also provide memory barriers.
Link: https://lore.kernel.org/r/20210527194748.662636-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
To create optimal code only want to use smp_load_acquire() and
smp_store_release() for user indices in rxe_queue APIs since kernel
indices are protected by locks which also act as memory barriers. By
adding a type to the queues we can determine which indices need to be
protected.
Link: https://lore.kernel.org/r/20210527194748.662636-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently when mlx4 maps the hca_core_clock page to the user space there
are read-modifiable registers, one of which is semaphore, on this page as
well as the clock counter. If user reads the wrong offset, it can modify
the semaphore and hang the device.
Do not map the hca_core_clock page to the user space unless the device has
been put in a backwards compatibility mode to support this feature.
After this patch, mlx4 core_clock won't be mapped to user space on the
majority of existing devices and the uverbs device time feature in
ibv_query_rt_values_ex() will be disabled.
Fixes: 52033cfb5a ("IB/mlx4: Add mmap call to map the hardware clock")
Link: https://lore.kernel.org/r/9632304e0d6790af84b3b706d8c18732bc0d5e27.1622726305.git.leonro@nvidia.com
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In a fork scenario, the parent and child can have same virtual address and
also share the uverbs fd. That causes to the list_for_each_entry search
return same doorbell physical page for all processes, even though that
page has been COW' or copied.
This patch takes the mm_struct into consideration during search, to make
sure that VA's belonging to different processes are not intermixed.
Resolves the malfunction of uverbs after fork in some specific cases.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/feacc23fe0bc6e1088c6824d5583798745e72405.1622726212.git.leonro@nvidia.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Shiraz Saleem says:
====================
Add Intel Ethernet Protocol Driver for RDMA (irdma)
The following patch series introduces a unified Intel Ethernet Protocol
Driver for RDMA (irdma) for the X722 iWARP device and a new E810 device
which supports iWARP and RoCEv2. The irdma module replaces the legacy
i40iw module for X722 and extends the ABI already defined for i40iw. It is
backward compatible with legacy X722 rdma-core provider (libi40iw).
X722 and E810 are PCI network devices that are RDMA capable. The RDMA
block of this parent device is represented via an auxiliary device
exported to 'irdma' using the core auxiliary bus infrastructure recently
added for 5.11 kernel. The parent PCI netdev drivers 'i40e' and 'ice'
register auxiliary RDMA devices with private data/ops encapsulated that
bind to auxiliary drivers registered in irdma module.
Currently, default is RoCEv2 for E810. Runtime support for protocol switch
to iWARP will be made available via devlink in a future patch.
====================
Link: https://lore.kernel.org/r/20210602205138.889-1-shiraz.saleem@intel.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
* branch 'irdma':
RDMA/irdma: Update MAINTAINERS file
RDMA/irdma: Add irdma Kconfig/Makefile and remove i40iw
RDMA/irdma: Add ABI definitions
RDMA/irdma: Add dynamic tracing for CM
RDMA/irdma: Add miscellaneous utility definitions
RDMA/irdma: Add user/kernel shared libraries
RDMA/irdma: Add RoCEv2 UD OP support
RDMA/irdma: Implement device supported verb APIs
RDMA/irdma: Add PBLE resource manager
RDMA/irdma: Add connection manager
RDMA/irdma: Add QoS definitions
RDMA/irdma: Add privileged UDA queue implementation
RDMA/irdma: Add HMC backing store setup functions
RDMA/irdma: Implement HW Admin Queue OPs
RDMA/irdma: Implement device initialization definitions
RDMA/irdma: Register auxiliary driver and implement private channel OPs
i40e: Register auxiliary devices to provide RDMA
i40e: Prep i40e header for aux bus conversion
ice: Register auxiliary device to provide RDMA
ice: Implement iidc operations
ice: Initialize RDMA support
iidc: Introduce iidc.h
i40e: Replace one-element array with flexible-array member
Add Kconfig and Makefile to build irdma driver.
Remove i40iw driver and add an alias in irdma.
Remove legacy exported symbols i40e_register_client
and i40e_unregister_client from i40e as they are no
longer used.
irdma is the replacement driver that supports X722.
Link: https://lore.kernel.org/r/20210602205138.889-16-shiraz.saleem@intel.com
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add definitions for managing the RDMA HW work scheduler (WS) tree.
A WS node is created via a control QP operation with the bandwidth
allocation, arbitration scheme, and traffic class of the QP specified.
The Qset handle returned associates the QoS parameters for the QP.
The Qset is registered with the LAN and an equivalent node is created
in the LAN packet scheduler tree.
Link: https://lore.kernel.org/r/20210602205138.889-7-shiraz.saleem@intel.com
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HW uses host memory as a backing store for a number of
protocol context objects and queue state tracking.
The Host Memory Cache (HMC) is a component responsible for
managing these objects stored in host memory.
Add the functions and data structures to manage the allocation
of backing pages used by the HMC for the various objects
Link: https://lore.kernel.org/r/20210602205138.889-5-shiraz.saleem@intel.com
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The cm_init_av_for_lap() and cm_init_av_by_path() function calls have the
following issues:
1. Both of them might sleep and should not be called under spinlock.
2. The access of cm_id_priv->av should be under cm_id_priv->lock, which
means it can't be initialized directly.
This patch splits the calling of 2 functions into two parts: first one
initializes an AV outside of the spinlock, the second one copies AV to
cm_id_priv->av under spinlock.
Fixes: e1444b5a16 ("IB/cm: Fix automatic path migration support")
Link: https://lore.kernel.org/r/038fb8ad932869b4548b0c7708cab7f76af06f18.1622629024.git.leonro@nvidia.com
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This reverts commit 9db0ff53cb, which wasn't
a full fix and still causes to the following panic:
panic @ time 1605623870.843, thread 0xfffffeb63b552000: vm_fault_lookup: fault on nofault entry, addr: 0xfffffe811a94e000
time = 1605623870
cpuid = 9, TSC = 0xb7937acc1b6
Panic occurred in module kernel loaded at 0xffffffff80200000:Stack: --------------------------------------------------
kernel:vm_fault+0x19da
kernel:vm_fault_trap+0x6e
kernel:trap_pfault+0x1f1
kernel:trap+0x31e
kernel:cm_destroy_id+0x38c
kernel:rdma_destroy_id+0x127
kernel:sdp_shutdown_task+0x3ae
kernel:taskqueue_run_locked+0x10b
kernel:taskqueue_thread_loop+0x87
kernel:fork_exit+0x83
Link: https://lore.kernel.org/r/4346449a7cdacc7a4eedc89cb1b42d8434ec9814.1622629024.git.leonro@nvidia.com
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that all the free paths are explicit cm_free_msg() will only be called
for msgs's allocated with cm_alloc_msg(), so we can assume the context is
set. Place it after the allocation function it is paired with for clarity.
Also remove a bogus NULL assignment in one place after a cancel. This does
nothing other than disable completions to become events, but changing the
state already did that.
Link: https://lore.kernel.org/r/082fd3552be0d1a2c19b1c4cefb5f3f0e3e68e82.1622629024.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This is being used with two quite different flows, one attaches the
message to the priv and the other does not.
Ensure the message attach is consistently done under the spinlock and
ensure that the free on error always detaches the message from the
cm_id_priv, also always under lock.
This makes read/write to the cm_id_priv->msg consistently locked and
consistently NULL'd when the message is freed, even in all error paths.
Link: https://lore.kernel.org/r/f692b8c89eecb34fd82244f317e478bea6c97688.1622629024.git.leonro@nvidia.com
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
After the commit 5ce2dced8e ("RDMA/ipoib: Set rtnl_link_ops for ipoib
interfaces"), if the IPoIB device is moved to non-initial netns,
destroying that netns lets the device vanish instead of moving it back to
the initial netns, This is happening because default_device_exit() skips
the interfaces due to having rtnl_link_ops set.
Steps to reporoduce:
ip netns add foo
ip link set mlx5_ib0 netns foo
ip netns delete foo
WARNING: CPU: 1 PID: 704 at net/core/dev.c:11435 netdev_exit+0x3f/0x50
Modules linked in: xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT
nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack
nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun d
fuse
CPU: 1 PID: 704 Comm: kworker/u64:3 Tainted: G S W 5.13.0-rc1+ #1
Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.1.5 04/11/2016
Workqueue: netns cleanup_net
RIP: 0010:netdev_exit+0x3f/0x50
Code: 48 8b bb 30 01 00 00 e8 ef 81 b1 ff 48 81 fb c0 3a 54 a1 74 13 48
8b 83 90 00 00 00 48 81 c3 90 00 00 00 48 39 d8 75 02 5b c3 <0f> 0b 5b
c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00
RSP: 0018:ffffb297079d7e08 EFLAGS: 00010206
RAX: ffff8eb542c00040 RBX: ffff8eb541333150 RCX: 000000008010000d
RDX: 000000008010000e RSI: 000000008010000d RDI: ffff8eb440042c00
RBP: ffffb297079d7e48 R08: 0000000000000001 R09: ffffffff9fdeac00
R10: ffff8eb5003be000 R11: 0000000000000001 R12: ffffffffa1545620
R13: ffffffffa1545628 R14: 0000000000000000 R15: ffffffffa1543b20
FS: 0000000000000000(0000) GS:ffff8ed37fa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005601b5f4c2e8 CR3: 0000001fc8c10002 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
ops_exit_list.isra.9+0x36/0x70
cleanup_net+0x234/0x390
process_one_work+0x1cb/0x360
? process_one_work+0x360/0x360
worker_thread+0x30/0x370
? process_one_work+0x360/0x360
kthread+0x116/0x130
? kthread_park+0x80/0x80
ret_from_fork+0x22/0x30
To avoid the above warning and later on the kernel panic that could happen
on shutdown due to a NULL pointer dereference, make sure to set the
netns_refund flag that was introduced by commit 3a5ca85707 ("can: dev:
Move device back to init netns on owning netns delete") to properly
restore the IPoIB interfaces to the initial netns.
Fixes: 5ce2dced8e ("RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces")
Link: https://lore.kernel.org/r/20210525150134.139342-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Include Hannes' SCSI command result rework in the staging branch.
[mkp: remove DRIVER_SENSE from mpi3mr]
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During ep_disconnect we have been doing iscsi_suspend_tx/queue to block new
I/O but every driver except cxgbi and iscsi_tcp can still get I/O from
__iscsi_conn_send_pdu() if we haven't called iscsi_conn_failure() before
ep_disconnect. This could happen if we were terminating the session, and
the logout timed out before it was even sent to libiscsi.
Fix the issue by adding a helper which reverses the bind_conn call that
allows new I/O to be queued. Drivers implementing ep_disconnect can use this
to make sure new I/O is not queued to them when handling the disconnect.
Link: https://lore.kernel.org/r/20210525181821.7617-3-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Tony Nguyen says:
====================
iwl-next Intel Wired LAN Driver Updates 2021-06-01
This pull request is targeting net-next and rdma-next branches.
These patches have been reviewed by netdev and rdma mailing lists[1].
This series adds RDMA support to the ice driver for E810 devices and
converts the i40e driver to use the auxiliary bus infrastructure
for X722 devices. The PCI netdev drivers register auxiliary RDMA devices
that will bind to auxiliary drivers registered by the new irdma module.
[1] https://lore.kernel.org/netdev/20210520143809.819-1-shiraz.saleem@intel.com/
---
v3:
- ice_aq_add_rdma_qsets(), ice_cfg_vsi_rdma(), ice_[ena|dis]_vsi_rdma_qset(),
and ice_cfg_rdma_fltr() no longer return ice_status
- Remove null check from ice_aq_add_rdma_qsets()
v2:
- Added patch 'i40e: Replace one-element array with flexible-array
member'
Changes since linked review (v6):
- Removed unnecessary checks in i40e_client_device_register() and
i40e_client_device_unregister()
- Simplified the i40e_client_device_register() API
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Originally the SCSI subsystem has been using 'special' SCSI status codes,
which were the SAM-specified ones but shifted by 1. As most drivers have
now been modified to use the SAM-specified ones, having two nearly
identical sets of definitions only causes confusion.
The Linux-specifed SCSI status codes have been marked obsolete for several
years so drop them and use the SAM-specified status codes throughout.
Link: https://lore.kernel.org/r/20210427083046.31620-41-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
drivers/infiniband/ulp/rtrs/rtrs-clt.c:1786:19: warning: result of comparison of
constant 'MAX_SESS_QUEUE_DEPTH' (65536) with expression of type 'u16'
(aka 'unsigned short') is always false [-Wtautological-constant-out-of-range-compare]
To fix it, limit MAX_SESS_QUEUE_DEPTH to u16 max, which is 65535, and
drop the check in rtrs-clt, as it's the type u16 max.
Link: https://lore.kernel.org/r/20210531122835.58329-1-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
sess->stats and sess->stats->pcpu_stats objects are freed
when sysfs entry is removed. If something wrong happens and
session is closed before sysfs entry is created,
sess->stats and sess->stats->pcpu_stats objects are not freed.
This patch adds freeing of them at three places:
1. When client uses wrong address and session creation fails.
2. When client fails to create a sysfs entry.
3. When client adds wrong address via sysfs add_path.
Fixes: 215378b838 ("RDMA/rtrs: client: sysfs interface functions")
Link: https://lore.kernel.org/r/20210528113018.52290-21-jinpu.wang@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The queue_depth is a module parameter for rtrs_server. It is used on the
client side to determing the queue_depth of the request queue for the RNBD
virtual block device.
During a reconnection event for an already mapped device, in case the
rtrs_server module queue_depth has changed, fail the reconnect attempt.
Also stop further auto reconnection attempts. A manual reconnect via
sysfs has to be triggerred.
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20210528113018.52290-20-jinpu.wang@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When closing a session, currently the rtrs_srv_stats object in the
closing session is freed by kobject release. But if it failed
to create a session by various reasons, it must free the rtrs_srv_stats
object directly because kobject is not created yet.
This problem is found by kmemleak as below:
1. One client machine maps /dev/nullb0 with session name 'bla':
root@test1:~# echo "sessname=bla path=ip:192.168.122.190 \
device_path=/dev/nullb0" > /sys/devices/virtual/rnbd-client/ctl/map_device
2. Another machine failed to create a session with the same name 'bla':
root@test2:~# echo "sessname=bla path=ip:192.168.122.190 \
device_path=/dev/nullb1" > /sys/devices/virtual/rnbd-client/ctl/map_device
-bash: echo: write error: Connection reset by peer
3. The kmemleak on server machine reported an error:
unreferenced object 0xffff888033cdc800 (size 128):
comm "kworker/2:1", pid 83, jiffies 4295086585 (age 2508.680s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000a72903b2>] __alloc_sess+0x1d4/0x1250 [rtrs_server]
[<00000000d1e5321e>] rtrs_srv_rdma_cm_handler+0xc31/0xde0 [rtrs_server]
[<00000000bb2f6e7e>] cma_ib_req_handler+0xdc5/0x2b50 [rdma_cm]
[<00000000e896235d>] cm_process_work+0x2d/0x100 [ib_cm]
[<00000000b6866c5f>] cm_req_handler+0x11bc/0x1c40 [ib_cm]
[<000000005f5dd9aa>] cm_work_handler+0xe65/0x3cf2 [ib_cm]
[<00000000610151e7>] process_one_work+0x4bc/0x980
[<00000000541e0f77>] worker_thread+0x78/0x5c0
[<00000000423898ca>] kthread+0x191/0x1e0
[<000000005a24b239>] ret_from_fork+0x3a/0x50
Fixes: 39c2d639ca ("RDMA/rtrs-srv: Set .release function for rtrs srv device during device init")
Link: https://lore.kernel.org/r/20210528113018.52290-18-jinpu.wang@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If two clients try to use the same session name, rtrs-server generates a
kernel error that it failed to create the sysfs because the filename
is duplicated.
This patch adds code to check if there already exists the same session
name with the different UUID. If a client tries to add more session,
it sends the UUID and the session name. Therefore it is ok if there is
already same session name with the same UUID. The rtrs-server must fail
only-if there is the same session name with the different UUID.
Link: https://lore.kernel.org/r/20210528113018.52290-17-jinpu.wang@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Aleksei Marov <aleksei.marov@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When re-connecting, it resets hb_missed_max to 0.
Before the first re-connecting, client will trigger re-connection
when it gets hb-ack more than 5 times. But after the first
re-connecting, clients will do re-connection whenever it does
not get hb-ack because hb_missed_max is 0.
There is no need to reset hb_missed_max when re-connecting.
hb_missed_max should be kept until closing the session.
Fixes: c0894b3ea6 ("RDMA/rtrs: core: lib functions shared between client and server modules")
Link: https://lore.kernel.org/r/20210528113018.52290-16-jinpu.wang@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ids_inflight is used to track the inflight IOs. But the use of atomic_t
variable can cause performance drops and can also become a performance
bottleneck.
This commit replaces the use of atomic_t with a percpu_ref structure. The
advantage it offers is, it doesn't check if the reference has fallen to 0,
until the user explicitly signals it to; and that is done by the
percpu_ref_kill() function call. After that, the percpu_ref structure
behaves like an atomic_t and for every put call, checks whether the
reference has fallen to 0 or not.
rtrs_srv_stats_rdma_to_str shows the count of ids_inflight as 0
for user-mode tools not to be confused.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20210528113018.52290-14-jinpu.wang@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
