This buffer is currently allocated in hfi1_init():
if (reinit)
ret = init_after_reset(dd);
else
ret = loadtime_init(dd);
if (ret)
goto done;
/* allocate dummy tail memory for all receive contexts */
dd->rcvhdrtail_dummy_kvaddr = dma_alloc_coherent(&dd->pcidev->dev,
sizeof(u64),
&dd->rcvhdrtail_dummy_dma,
GFP_KERNEL);
if (!dd->rcvhdrtail_dummy_kvaddr) {
dd_dev_err(dd, "cannot allocate dummy tail memory\n");
ret = -ENOMEM;
goto done;
}
The reinit triggered path will overwrite the old allocation and leak it.
Fix by moving the allocation to hfi1_alloc_devdata() and the deallocation
to hfi1_free_devdata().
Link: https://lore.kernel.org/r/20211129192008.101968.91302.stgit@awfm-01.cornelisnetworks.com
Cc: stable@vger.kernel.org
Fixes: 46b010d3ee ("staging/rdma/hfi1: Workaround to prevent corruption during packet delivery")
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When optional counter support was added the allocation of the memory
holding the counter descriptors was not cleared properly. This caused
WARN_ON()s in the IB/sysfs code to be hit.
This is because the uninitialized memory made some of the counters wrongly
look like optional counters. Use kzalloc.
While here change the sizeof() calls to use the pointer rather than the
name of the type.
WARNING: CPU: 0 PID: 32644 at drivers/infiniband/core/sysfs.c:1064 ib_setup_port_attrs+0x7e1/0x890 [ib_core]
CPU: 0 PID: 32644 Comm: kworker/0:2 Tainted: G S W 5.15.0+ #36
Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/2016
Workqueue: events work_for_cpu_fn
RIP: 0010:ib_setup_port_attrs+0x7e1/0x890 [ib_core]
RSP: 0018:ffffc90006ea3c40 EFLAGS: 00010202
RAX: 0000000000000068 RBX: ffff888106ad8000 RCX: 0000000000000138
RDX: ffff888126c84c00 RSI: ffff888103c41000 RDI: 0000000000000124
RBP: ffff88810f63a801 R08: ffff888126c8a000 R09: 0000000000000001
R10: ffffffffa09acf20 R11: 0000000000000065 R12: ffff88810f63a800
R13: ffff88810f63a800 R14: ffff88810f63a8e0 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff888667a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005590102cb078 CR3: 000000000240a003 CR4: 00000000001706f0
Call Trace:
ib_register_device.cold.44+0x23e/0x2d0 [ib_core]
rvt_register_device+0xfa/0x230 [rdmavt]
hfi1_register_ib_device+0x623/0x690 [hfi1]
init_one.cold.36+0x2d1/0x49b [hfi1]
local_pci_probe+0x45/0x80
work_for_cpu_fn+0x16/0x20
process_one_work+0x1b1/0x360
worker_thread+0x1d4/0x3a0
kthread+0x11a/0x140
ret_from_fork+0x22/0x30
Fixes: 5e2ddd1e59 ("RDMA/counter: Add optional counter support")
Link: https://lore.kernel.org/r/20211115200913.124104.47770.stgit@awfm-01.cornelisnetworks.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Merged due to dependencies in following patches.
Conflict in drivers/infiniband/hw/hfi1/ipoib_tx.c resolved by hand to take
the %p change and txq stats rename together.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch removes kmem cache allocation and deallocation in favor of
having the ipoib_txreq in the ring.
The consumer is now the packet sending side allocating tx descriptors from
ring and the producer is the napi interrupt handling freeing tx
descriptors.
The locks are now eliminated because the napi tx lock insures a single
consumer and the napi handling insures a single producer.
The napi poll is converted to memory poll looking for items that have been
marked completed.
Fixes: d99dc602e2 ("IB/hfi1: Add functions to transmit datagram ipoib packets")
Link: https://lore.kernel.org/r/20210913132826.131370.4397.stgit@awfm-01.cornelisnetworks.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pull rdma fixes from Jason Gunthorpe:
"I don't usually send a second PR in the merge window, but the fix to
mlx5 is significant enough that it should start going through the
process ASAP. Along with it comes some of the usual -rc stuff that
would normally wait for a -rc2 or so.
Summary:
Important error case regression fixes in mlx5:
- Wrong size used when computing the error path smaller allocation
request leads to corruption
- Confusing but ultimately harmless alignment mis-calculation
Static checker warning fixes:
- NULL pointer subtraction in qib
- kcalloc in bnxt_re
- Missing static on global variable in hfi1"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/hfi1: make hist static
RDMA/bnxt_re: Prefer kcalloc over open coded arithmetic
IB/qib: Fix null pointer subtraction compiler warning
RDMA/mlx5: Fix xlt_chunk_align calculation
RDMA/mlx5: Fix number of allocated XLT entries
Pull rdma updates from Jason Gunthorpe:
"This is quite a small cycle, no major series stands out. The HNS and
rxe drivers saw the most activity this cycle, with rxe being broken
for a good chunk of time. The significant deleted line count is due to
a SPDX cleanup series.
Summary:
- Various cleanup and small features for rtrs
- kmap_local_page() conversions
- Driver updates and fixes for: efa, rxe, mlx5, hfi1, qed, hns
- Cache the IB subnet prefix
- Rework how CRC is calcuated in rxe
- Clean reference counting in iwpm's netlink
- Pull object allocation and lifecycle for user QPs to the uverbs
core code
- Several small hns features and continued general code cleanups
- Fix the scatterlist confusion of orig_nents/nents introduced in an
earlier patch creating the append operation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (90 commits)
RDMA/mlx5: Relax DCS QP creation checks
RDMA/hns: Delete unnecessary blank lines.
RDMA/hns: Encapsulate the qp db as a function
RDMA/hns: Adjust the order in which irq are requested and enabled
RDMA/hns: Remove RST2RST error prints for hw v1
RDMA/hns: Remove dqpn filling when modify qp from Init to Init
RDMA/hns: Fix QP's resp incomplete assignment
RDMA/hns: Fix query destination qpn
RDMA/hfi1: Convert to SPDX identifier
IB/rdmavt: Convert to SPDX identifier
RDMA/hns: Bugfix for incorrect association between dip_idx and dgid
RDMA/hns: Bugfix for the missing assignment for dip_idx
RDMA/hns: Bugfix for data type of dip_idx
RDMA/hns: Fix incorrect lsn field
RDMA/irdma: Remove the repeated declaration
RDMA/core/sa_query: Retry SA queries
RDMA: Use the sg_table directly and remove the opencoded version from umem
lib/scatterlist: Fix wrong update of orig_nents
lib/scatterlist: Provide a dedicated function to support table append
RDMA/hns: Delete unused hns bitmap interface
...
kmalloc_array() is called to allocate memory for tx->descp. If it fails,
the function __sdma_txclean() is called:
__sdma_txclean(dd, tx);
However, in the function __sdma_txclean(), tx-descp is dereferenced if
tx->num_desc is not zero:
sdma_unmap_desc(dd, &tx->descp[0]);
To fix this possible null-pointer dereference, assign the return value of
kmalloc_array() to a local variable descp, and then assign it to tx->descp
if it is not NULL. Otherwise, go to enomem.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20210806133029.194964-1-islituo@gmail.com
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It is possible for the primary IPoIB network device associated with any
RDMA device to fail to join certain multicast groups preventing IPv6
neighbor discovery and possibly other network ULPs from working
correctly. The IPv4 broadcast group is not affected as the IPoIB network
device handles joining that multicast group directly.
This is because the primary IPoIB network device uses the pkey at ndex 0
in the associated RDMA device's pkey table. Anytime the pkey value of
index 0 changes, the primary IPoIB network device automatically modifies
it's broadcast address (i.e. /sys/class/net/[ib0]/broadcast), since the
broadcast address includes the pkey value, and then bounces carrier. This
includes initial pkey assignment, such as when the pkey at index 0
transitions from the opa default of invalid (0x0000) to some value such as
the OPA default pkey for Virtual Fabric 0: 0x8001 or when the fabric
manager is restarted with a configuration change causing the pkey at index
0 to change. Many network ULPs are not sensitive to the carrier bounce and
are not expecting the broadcast address to change including the linux IPv6
stack. This problem does not affect IPoIB child network devices as their
pkey value is constant for all time.
To mitigate this issue, change the default pkey in at index 0 to 0x8001 to
cover the predominant case and avoid issues as ipoib comes up and the FM
sweeps.
At some point, ipoib multicast support should automatically fix
non-broadcast addresses as it does with the primary broadcast address.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20210715160445.142451.47651.stgit@awfm-01.cornelisnetworks.com
Suggested-by: Josh Collier <josh.d.collier@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pull tracing updates from Steven Rostedt:
- Added option for per CPU threads to the hwlat tracer
- Have hwlat tracer handle hotplug CPUs
- New tracer: osnoise, that detects latency caused by interrupts,
softirqs and scheduling of other tasks.
- Added timerlat tracer that creates a thread and measures in detail
what sources of latency it has for wake ups.
- Removed the "success" field of the sched_wakeup trace event. This has
been hardcoded as "1" since 2015, no tooling should be looking at it
now. If one exists, we can revert this commit, fix that tool and try
to remove it again in the future.
- tgid mapping fixed to handle more than PID_MAX_DEFAULT pids/tgids.
- New boot command line option "tp_printk_stop", as tp_printk causes
trace events to write to console. When user space starts, this can
easily live lock the system. Having a boot option to stop just after
boot up is useful to prevent that from happening.
- Have ftrace_dump_on_oops boot command line option take numbers that
match the numbers shown in /proc/sys/kernel/ftrace_dump_on_oops.
- Bootconfig clean ups, fixes and enhancements.
- New ktest script that tests bootconfig options.
- Add tracepoint_probe_register_may_exist() to register a tracepoint
without triggering a WARN*() if it already exists. BPF has a path
from user space that can do this. All other paths are considered a
bug.
- Small clean ups and fixes
* tag 'trace-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (49 commits)
tracing: Resize tgid_map to pid_max, not PID_MAX_DEFAULT
tracing: Simplify & fix saved_tgids logic
treewide: Add missing semicolons to __assign_str uses
tracing: Change variable type as bool for clean-up
trace/timerlat: Fix indentation on timerlat_main()
trace/osnoise: Make 'noise' variable s64 in run_osnoise()
tracepoint: Add tracepoint_probe_register_may_exist() for BPF tracing
tracing: Fix spelling in osnoise tracer "interferences" -> "interference"
Documentation: Fix a typo on trace/osnoise-tracer
trace/osnoise: Fix return value on osnoise_init_hotplug_support
trace/osnoise: Make interval u64 on osnoise_main
trace/osnoise: Fix 'no previous prototype' warnings
tracing: Have osnoise_main() add a quiescent state for task rcu
seq_buf: Make trace_seq_putmem_hex() support data longer than 8
seq_buf: Fix overflow in seq_buf_putmem_hex()
trace/osnoise: Support hotplug operations
trace/hwlat: Support hotplug operations
trace/hwlat: Protect kdata->kthread with get/put_online_cpus
trace: Add timerlat tracer
trace: Add osnoise tracer
...
init_port was only being used to register sysfs attributes against the
port kobject. Now that all users are creating static attribute_group's we
can simply set the attribute_group list in the ops and the core code can
just handle it directly.
This makes all the sysfs management quite straightforward and prevents any
driver from abusing the naked port kobject in future because no driver
code can access it.
Link: https://lore.kernel.org/r/114f68f3d921460eafe14cea5a80ca65d81729c3.1623427137.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pull rdma updates from Jason Gunthorpe:
"This is significantly bug fixes and general cleanups. The noteworthy
new features are fairly small:
- XRC support for HNS and improves RQ operations
- Bug fixes and updates for hns, mlx5, bnxt_re, hfi1, i40iw, rxe, siw
and qib
- Quite a few general cleanups on spelling, error handling, static
checker detections, etc
- Increase the number of device ports supported beyond 255. High port
count software switches now exist
- Several bug fixes for rtrs
- mlx5 Device Memory support for host controlled atomics
- Report SRQ tables through to rdma-tool"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (145 commits)
IB/qib: Remove redundant assignment to ret
RDMA/nldev: Add copy-on-fork attribute to get sys command
RDMA/bnxt_re: Fix a double free in bnxt_qplib_alloc_res
RDMA/siw: Fix a use after free in siw_alloc_mr
IB/hfi1: Remove redundant variable rcd
RDMA/nldev: Add QP numbers to SRQ information
RDMA/nldev: Return SRQ information
RDMA/restrack: Add support to get resource tracking for SRQ
RDMA/nldev: Return context information
RDMA/core: Add CM to restrack after successful attachment to a device
RDMA/cma: Skip device which doesn't support CM
RDMA/rxe: Fix a bug in rxe_fill_ip_info()
RDMA/mlx5: Expose private query port
RDMA/mlx4: Remove an unused variable
RDMA/mlx5: Fix type assignment for ICM DM
IB/mlx5: Set right RoCE l3 type and roce version while deleting GID
RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails
RDMA/cxgb4: add missing qpid increment
IB/ipoib: Remove unnecessary struct declaration
RDMA/bnxt_re: Get rid of custom module reference counting
...
All other users of the dummy netdevice embed the netdev in other
structures:
init_dummy_netdev(&mal->dummy_dev);
init_dummy_netdev(ð->dummy_dev);
init_dummy_netdev(&ar->napi_dev);
init_dummy_netdev(&irq_grp->napi_ndev);
init_dummy_netdev(&wil->napi_ndev);
init_dummy_netdev(&trans_pcie->napi_dev);
init_dummy_netdev(&dev->napi_dev);
init_dummy_netdev(&bus->mux_dev);
The AIP and VNIC implementation turns that model inside out and used a
kfree() to free what appears to be a netdev struct when in reality, it is
a struct that enbodies the rx state as well as the dummy netdev used to
support napi_poll across disparate receive contexts. The relationship is
infered by the odd allocation:
const int netdev_size = sizeof(*dd->dummy_netdev) +
sizeof(struct hfi1_netdev_priv);
<snip>
dd->dummy_netdev = kcalloc_node(1, netdev_size, GFP_KERNEL, dd->node);
Correct the issue by:
- Correctly naming the alloc and free functions
- Renaming hfi1_netdev_priv to hfi1_netdev_rx
- Replacing dd dummy_netdev with a netdev_rx pointer
- Embedding the net_device in hfi1_netdev_rx
- Moving the init_dummy_netdev to the alloc routine
- Adjusting wrappers to fit the new model
Fixes: 6991abcb99 ("IB/hfi1: Add functions to receive accelerated ipoib packets")
Link: https://lore.kernel.org/r/1617026056-50483-11-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
