Driver Changes:
- Added bits of DG2 support around page table handling (Stuart Summers, Matthew Auld)
- Fixed wakeref leak in PMU busyness during reset in GuC mode (Umesh Nerlige Ramappa)
- Fixed debugfs access crash if GuC failed to load (John Harrison)
- Bring back GuC error log to error capture, undoing accidental earlier breakage (Thomas Hellström)
- Fixed memory leak in error capture caused by earlier refactoring (Thomas Hellström)
- Exclude reserved stolen from driver use (Chris Wilson)
- Add memory region sanity checking and optional full test (Chris Wilson)
- Fixed buffer size truncation in TTM shmemfs backend (Robert Beckett)
- Use correct lock and don't overwrite internal data structures when stealing GuC context ids (Matthew Brost)
- Don't hog IRQs when destroying GuC contexts (John Harrison)
- Make GuC to Host communication more robust (Matthew Brost)
- Continuation of locking refactoring around VMA and backing store handling (Maarten Lankhorst)
- Improve performance of reading GuC log from debugfs (John Harrison)
- Log when GuC fails to reset an engine (John Harrison)
- Speed up GuC/HuC firmware loading by requesting RP0 (Vinay Belgaumkar)
- Further work on asynchronous VMA unbinding (Thomas Hellström, Christian König)
- Refactor GuC/HuC firmware handling to prepare for future platforms (John Harrison)
- Prepare for future different GuC/HuC firmware signing key sizes (Daniele Ceraolo Spurio, Michal Wajdeczko)
- Add noreclaim annotations (Matthew Auld)
- Remove racey GEM_BUG_ON between GPU reset and GuC communication handling (Matthew Brost)
- Refactor i915->gt with to_gt(i915) to prepare for future platforms (Michał Winiarski, Andi Shyti)
- Increase GuC log size for CONFIG_DEBUG_GEM (John Harrison)
- Fixed engine busyness in selftests when in GuC mode (Umesh Nerlige Ramappa)
- Make engine parking work with PREEMPT_RT (Sebastian Andrzej Siewior)
- Replace X86_FEATURE_PAT with pat_enabled() (Lucas De Marchi)
- Selftest for stealing of guc ids (Matthew Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YcRvKO5cyPvIxVCi@tursulin-mobl2
By default, GT (and GuC) run at RPn. Requesting for RP0
before firmware load can speed up DMA and HuC auth as well.
In addition to writing to 0xA008, we also need to enable
swreq in 0xA024 so that Punit will pay heed to our request.
SLPC will restore the frequency back to RPn after initialization,
but we need to manually do that for the non-SLPC path.
We don't need a manual override in the SLPC disabled case, just
use the intel_rps_set function to ensure consistent RPS state.
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211216233022.21351-1-vinay.belgaumkar@intel.com
Add methods for interacting with GuC for enabling SLPC. Enable
SLPC after GuC submission has been established. GuC load will
fail if SLPC cannot be successfully initialized. Add various
helper methods to set/unset the parameters for SLPC. They can
be set using H2G calls or directly setting bits in the shared
data structure.
v2: Address several review comments, add new helpers for
decoding the SLPC min/max frequencies. Use masks instead of hardcoded
constants. (Michal W)
v3: Split global_state_to_string function, and check for positive
non-zero return value from intel_guc_send() (Michal W)
v4: Optimize the stringify function and other comments (Michal W)
v5: Enable slpc as well before declaring GuC submission status (Michal W)
v6: Checkpatch()
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-6-vinay.belgaumkar@intel.com
The new GuC interface introduces an MMIO H2G command,
INTEL_GUC_ACTION_RESET_CLIENT, which is used to implement suspend. This
MMIO tears down any active contexts generating a context reset G2H CTB
for each. Once that step completes the GuC tears down the CTB
channels. It is safe to suspend once this MMIO H2G command completes
and all G2H CTBs have been processed. In practice the i915 will likely
never receive a G2H as suspend should only be called after the GPU is
idle.
Resume is implemented in the same manner as before - simply reload the
GuC firmware and reinitialize everything (e.g. CTB channels, contexts,
etc..).
v2:
(Michel / John H)
- INTEL_GUC_ACTION_RESET_CLIENT 0x5B01 -> 0x5507
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-12-matthew.brost@intel.com
Reset implementation for new GuC interface. This is the legacy reset
implementation which is called when the i915 owns the engine hang check.
Future patches will offload the engine hang check to GuC but we will
continue to maintain this legacy path as a fallback and this code path
is also required if the GuC dies.
With the new GuC interface it is not possible to reset individual
engines - it is only possible to reset the GPU entirely. This patch
forces an entire chip reset if any engine hangs.
v2:
(Michal)
- Check for -EPIPE rather than -EIO (CT deadlock/corrupt check)
v3:
(John H)
- Split into a series of smaller patches
v4:
(John H)
- Fix typo
- Add braces around if statements in reset code
v5:
(Checkpatch)
- Fix warnings
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <john.c.harrison@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-9-matthew.brost@intel.com
This was done by the following semantic patch:
@@ expression i915; @@
- INTEL_GEN(i915)
+ GRAPHICS_VER(i915)
@@ expression i915; expression E; @@
- INTEL_GEN(i915) >= E
+ GRAPHICS_VER(i915) >= E
@@ expression dev_priv; expression E; @@
- !IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) != E
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) == E
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_GRAPHICS_VER(dev_priv, from, until)
@def@
expression E;
identifier id =~ "^gen$";
@@
- id = GRAPHICS_VER(E)
+ ver = GRAPHICS_VER(E)
@@
identifier def.id;
@@
- id
+ ver
It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605155356.4183026-2-lucas.demarchi@intel.com
There is a module parameter for controlling what GuC/HuC features are
enabled. Setting to -1 means 'use the default'. However, the default
was not well defined, out of date and needs to be different across
platforms.
The default is now to disable both GuC and HuC on legacy platforms
where legacy means TGL/RKL and anything prior to Gen12. For new
platforms, the default is to load HuC but not enable GuC submission
as that has not landed yet.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113220724.2484897-1-John.C.Harrison@Intel.com
Start using device specific parameters instead of module parameters for
most things. The module parameters become the immutable initial values
for i915 parameters. The device specific parameters in i915->params
start life as a copy of i915_modparams. Any later changes are only
reflected in the debugfs.
The stragglers are:
* i915.force_probe and i915.modeset. Needed before dev_priv is
available. This is fine because the parameters are read-only and never
modified.
* i915.verbose_state_checks. Passing dev_priv to I915_STATE_WARN and
I915_STATE_WARN_ON would result in massive and ugly churn. This is
handled by not exposing the parameter via debugfs, and leaving the
parameter writable in sysfs. This may be fixed up in follow-up work.
* i915.inject_probe_failure. Only makes sense in terms of the module,
not the device. This is handled by not exposing the parameter via
debugfs.
v2: Fix uc i915 lookup code (Michał Winiarski)
Cc: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200618150402.14022-1-jani.nikula@intel.com
We are quite trigger happy in cleaning up the firmware blobs, as we do
so from several error/fini paths in GuC/HuC/uC code. We do have the
__uc_cleanup_firmwares cleanup function, which unwinds
__uc_fetch_firmwares and is already called both from the error path of
gem_init and from gem_driver_release, so let's stop cleaning up from
all the other paths.
The fact that we're not cleaning the firmware immediately means that
we can't consider firmware availability as an indication of
initialization success. A "LOADABLE" status has been added to
indicate that the initialization was successful, to be used to
selectively load HuC only if HuC init has completed (HuC init failure
is not considered a fatal error).
v2: s/ready_to_load/loadable (Michal), only run guc/huc_fini if the
fw is in loadable state
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> #v1
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-9-daniele.ceraolospurio@intel.com
Now that we can differentiate wants vs uses GuC/HuC, intel_uc_init is
restricted to running only if we have successfully fetched the required
blob(s) and are committed to using the microcontroller(s).
The only remaining thing that can go wrong in uc_init is the allocation
of GuC/HuC related objects; if we get such a failure better to bail out
immediately instead of wedging later, like we do for e.g.
intel_engines_init, since without objects we can't use the HW, including
not being able to attempt the firmware load.
While at it, remove the unneeded fw_cleanup call (this is handled
outside of gt_init) and add a probe failure injection point for testing.
Also, update the logs for <g/h>uc_init failures to probe_failure() since
they will cause the driver load to fail.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Fernando Pacheco <fernando.pacheco@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-8-daniele.ceraolospurio@intel.com
To be able to setup GuC submission functions during engine init we need
to commit to using GuC as soon as possible.
Currently, the only thing that can stop us from using the
microcontrollers once we've fetched the blobs is a fundamental
error (e.g. OOM); given that if we hit such an error we can't really
fall-back to anything, we can "officialize" the FW fetching completion
as the moment at which we're committing to using GuC.
To better differentiate this case, the uses_guc check, which indicates
that GuC is supported and was selected in modparam, is renamed to
wants_guc and a new uses_guc is introduced to represent the case were
we're committed to using the GuC. Note that uses_guc does still not imply
that the blob is actually loaded on the HW (is_running is the check for
that). Also, since we need to have attempted the fetch for the result
of uses_guc to be meaningful, we need to make sure we've moved away
from INTEL_UC_FIRMWARE_SELECTED.
All the GuC changes have been mirrored on the HuC for coherency.
v2: split fetch return changes and new macros to their own patches,
support HuC only if GuC is wanted, improve "used" state
description (Michal)
v3: s/wants_huc/uses_huc in uc_init_wopcm
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Fernando Pacheco <fernando.pacheco@intel.com> #v1
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-6-daniele.ceraolospurio@intel.com
The only difference from the GuC POV between guc_communication_stop and
guc_communication_disable is that the former can be called after GuC
has been reset. Instead of having two separate paths, we can just skip
the call into GuC in the disabling path and re-use that.
Note that by using the disable() path instead of the stop() one there
are two additional changes in SW side for the stop path:
- interrupts are now disabled before disabling the CT, which is ok
because we do not want interrupts with CT disabled;
- guc_get_mmio_msg() is called in the stop case as well, which is ok
because if there are errors before the reset we do want to record
them.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217012316.13271-1-daniele.ceraolospurio@intel.com
Instead of relying on the workqueue, the upcoming reworked GuC
submission flow will offer the host driver indipendent control over
the execution status of each context submitted to GuC. As part of this,
the doorbell usage model has been reworked, with each doorbell being
paired to a single lrc and a doorbell ring representing new work
available for that specific context. This mechanism, however, limits
the number of contexts that can be registered with GuC to the number of
doorbells, which is an undesired limitation. To avoid this limitation,
we requested the GuC team to also provide a H2G that will allow the host
to notify the GuC of work available for a specified lrc, so we can use
that mechanism instead of relying on the doorbells. We can therefore drop
the doorbell code we currently have, also given the fact that in the
unlikely case we'd want to switch back to using doorbells we'd have to
heavily rework it.
The workqueue will still have a use in the new interface to pass special
commands, so that code has been retained for now.
With the doorbells gone and the GuC client becoming even simpler, the
existing GuC selftests don't give us any meaningful coverage so we can
remove them as well. Some selftests might come with the new code, but
they will look different from what we have now so if doesn't seem worth
it to keep the file around in the meantime.
v2: fix comments and commit message (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205220243.27403-3-daniele.ceraolospurio@intel.com
During normal driver unload we attempt to disable GuC communication
while it is currently stopped. This results in a nop'd call to
intel_guc_ct_disable within guc_disable_communication because
stop/disable rely on the same flag to prevent further comms with CT.
We can avoid the call to disable and still leave communication in a
satisfactory state by extracting a set of shared steps from stop/disable.
This set can include guc_disable_interrupts as we do not require the
single caller of guc_stop_communication to be atomic:
"drm/i915/selftests: Fixup atomic reset checking".
This situation (stop -> disable) only occurs during intel_uc_fini_hw,
so during fini, call guc_disable_communication only if currently enabled.
The symmetric calls to enable/disable remain unmodified for all other
scenarios.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110943
Signed-off-by: Fernando Pacheco <fernando.pacheco@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829174154.14675-1-fernando.pacheco@intel.com
Since commit 6ca9a2beb5 ("drm/i915: Unwind i915_gem_init() failure")
we believed that we correctly handle all errors encountered during
GuC initialization, including special one that indicates request to
run driver with disabled GPU submission (-EIO).
Unfortunately since commit 121981fafe ("drm/i915/guc: Combine
enable_guc_loading|submission modparams") we stopped using that
error code to avoid unwanted fallback to execlist submission mode.
In result any GuC initialization failure was treated as non-recoverable
error leading to driver load abort, so we could not even read related
GuC error log to investigate cause of the problem.
For now always return -EIO on any uC hardware related failure.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811195132.9660-5-michal.wajdeczko@intel.com
