When trying to bring IS_ACTIVE to linux/kconfig.h I thought it wouldn't
provide much value just encapsulating it in a boolean context. So I also
added the support for handling undefined macros as the IS_ENABLED()
counterpart. However the feedback received from Masahiro Yamada was that
it is too ugly, not providing much value. And just wrapping in a boolean
context is too dumb - we could simply open code it.
As detailed in commit babaab2f47 ("drm/i915: Encapsulate kconfig
constant values inside boolean predicates"), the IS_ACTIVE macro was
added to workaround a compilation warning. However after checking again
our current uses of IS_ACTIVE it turned out there is only
1 case in which it triggers a warning in clang (due
-Wconstant-logical-operand) and 2 in smatch. All the others
can simply use the shorter version, without wrapping it in any macro.
So here I'm dialing all the way back to simply removing the macro. That
single case hit by clang can be changed to make the constant come first,
so it doesn't think it's mask:
- if (context && CONFIG_DRM_I915_FENCE_TIMEOUT)
+ if (CONFIG_DRM_I915_FENCE_TIMEOUT && context)
As talked with Dan Carpenter, that logic will be added in smatch as
well, so it will also stop warning about it.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005171728.3147094-1-lucas.demarchi@intel.com
This adds a bunch of complexity which the media driver has never
actually used. The media driver does technically bond a balanced engine
to another engine but the balanced engine only has one engine in the
sibling set. This doesn't actually result in a virtual engine.
This functionality was originally added to handle cases where we may
have more than two video engines and media might want to load-balance
their bonded submits by, for instance, submitting to a balanced vcs0-1
as the primary and then vcs2-3 as the secondary. However, no such
hardware has shipped thus far and, if we ever want to enable such
use-cases in the future, we'll use the up-and-coming parallel submit API
which targets GuC submission.
This makes I915_CONTEXT_ENGINES_EXT_BOND a total no-op. We leave the
validation code in place in case we ever decide we want to do something
interesting with the bonding information.
v2 (Jason Ekstrand):
- Don't delete quite as much code.
v3 (Tvrtko Ursulin):
- Add some history to the commit message
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-10-jason@jlekstrand.net
Previously, we were storing the ring size in the ring pointer before it
was actually allocated. We would then guard setting the ring size on
checking for CONTEXT_ALLOC_BIT. This is error-prone at best and really
only saves us a few bytes on something that already burns at least 4K.
Instead, this patch adds a new ring_size field and makes everything use
that.
v2 (Daniel Vetter):
- Replace 512 * SZ_4K with SZ_2M
v2 (Jason Ekstrand):
- Rebase on top of page migration code
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-3-jason@jlekstrand.net
This was done by the following semantic patch:
@@ expression i915; @@
- INTEL_GEN(i915)
+ GRAPHICS_VER(i915)
@@ expression i915; expression E; @@
- INTEL_GEN(i915) >= E
+ GRAPHICS_VER(i915) >= E
@@ expression dev_priv; expression E; @@
- !IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) != E
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) == E
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_GRAPHICS_VER(dev_priv, from, until)
@def@
expression E;
identifier id =~ "^gen$";
@@
- id = GRAPHICS_VER(E)
+ ver = GRAPHICS_VER(E)
@@
identifier def.id;
@@
- id
+ ver
It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605155356.4183026-2-lucas.demarchi@intel.com
Driver Changes:
- Prepare for local/device memory support on DG1 by starting
to use it for kernel internal allocations: context, ring
and engine scratch (Matt A, CQ, Abdiel, Imre)
- Sandybridge fix to avoid hard hang on ring resume (Chris)
- Limit imported dma-buf size to int32 (Matt A)
- Double check heartbeat timeout before resetting (Chris)
- Use new tasklet API for execution list (Emil)
- Fix SPDX checkpats warnings (Chris)
- Fixes for various checkpatch warnings (Chris)
- Selftest improvements (Chris)
- Move the defer_request waiter active assertion to correct spot (Chris)
- Make local-memory probing a GT operation (Matt, Tvrtko)
- Protect against request freeing during cancellation on wedging (Chris)
- Retire unexpected starting state error dumping (Chris)
- Distinction of memory regions in debugging (Zbigniew)
- Always flush the submission queue on checking for idle (Chris)
- Consolidate 2big error check to helper (Matt)
- Decrease number of subplatform bits (Tvrtko)
- Remove unused internal request priority levels (Chris)
- Document the unused internal header bits in buddy allocator (Matt)
- Cleanup the region class/instance encoding (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YGxksaZGXHnFxlwg@jlahtine-mobl.ger.corp.intel.com
The reason why we did not enable preemption on Broadwater was due to
missing GPGPU workarounds. Since this only applies to rcs0, only
restrict rcs0 (and our global capabilities).
While this does not affect exposing a preemption capability to
userspace, it does affect our internal decisions on whether to use
timeslicing and semaphores between individual engines.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108204026.20682-6-chris@chris-wilson.co.uk
Having recognised that we do not change the sibling until we schedule
out, we can then defer the decision to resubmit the virtual engine from
the unwind of the active queue to scheduling out of the virtual context.
This improves our resilence in virtual engine scheduling, and should
eliminate the rare cases of gem_exec_balance failing.
By keeping the unwind order intact on the local engine, we can preserve
data dependency ordering while doing a preempt-to-busy pass until we
have determined the new ELSP. This means that if we try to timeslice
between a virtual engine and a data-dependent ordinary request, the pair
will maintain their relative ordering and we will avoid the
resubmission, cancelling the timeslicing until further change.
The dilemma though is that we then may end up in a situation where the
'demotion' of the virtual request to an ordinary request in the engine
queue results in filling the ELSP[] with virtual requests instead of
spreading the load across the engines. To compensate for this, we mark
each virtual request and refuse to resubmit a virtual request in the
secondary ELSP slots, thus forcing subsequent virtual requests to be
scheduled out after timeslicing. By delaying the decision until we
schedule out, we will avoid unnecessary resubmission.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2079
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2098
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201224135544.1713-7-chris@chris-wilson.co.uk
Rather than having special case code for opportunistically calling
process_csb() and performing a direct submit while holding the engine
spinlock for submitting the request, simply call the tasklet directly.
This allows us to retain the direct submission path, including the CS
draining to allow fast/immediate submissions, without requiring any
duplicated code paths, and most importantly greatly simplifying the
control flow by removing reentrancy. This will enable us to close a few
races in the virtual engines in the next few patches.
The trickiest part here is to ensure that paired operations (such as
schedule_in/schedule_out) remain under consistent locking domains,
e.g. when pulled outside of the engine->active.lock
v2: Use bh kicking, see commit 3c53776e29 ("Mark HI and TASKLET
softirq synchronous").
v3: Update engine-reset to be tasklet aware
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201224135544.1713-1-chris@chris-wilson.co.uk
