When the APIs were added to manage VMs more directly from userspace, the
questionable choice was made to allow changing out the VM on a context
at any time. This is horribly racy and there's absolutely no reason why
any userspace would want to do this outside of testing that exact race.
By removing support for CONTEXT_PARAM_VM from ctx_setparam, we make it
impossible to change out the VM after the context has been fully
created. This lets us delete a bunch of deferred task code as well as a
duplicated (and slightly different) copy of the code which programs the
PPGTT registers.
v2 (Jason Ekstrand):
- Expand the commit message
v3 (Daniel Vetter):
- Don't drop the __rcu on the vm pointer
v4 (Jason Ekstrand):
- Make it more obvious that I915_CONTEXT_PARAM_VM returns -EINVAL
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-26-jason@jlekstrand.net
The current context uAPI allows for two methods of setting context
parameters: SET_CONTEXT_PARAM and CONTEXT_CREATE_EXT_SETPARAM. The
former is allowed to be called at any time while the later happens as
part of GEM_CONTEXT_CREATE. Currently, everything settable via one is
settable via the other. While some params are fairly simple and setting
them on a live context is harmless such as the context priority, others
are far trickier such as the VM or the set of engines. In order to swap
out the VM, for instance, we have to delay until all current in-flight
work is complete, swap in the new VM, and then continue. This leads to
a plethora of potential race conditions we'd really rather avoid.
In previous patches, we added a i915_gem_proto_context struct which is
capable of storing and tracking all such create parameters. This commit
delays the creation of the actual context until after the client is done
configuring it with SET_CONTEXT_PARAM. From the perspective of the
client, it has the same u32 context ID the whole time. From the
perspective of i915, however, it's an i915_gem_proto_context right up
until the point where we attempt to do something which the proto-context
can't handle. Then the real context gets created.
This is accomplished via a little xarray dance. When GEM_CONTEXT_CREATE
is called, we create a proto-context, reserve a slot in context_xa but
leave it NULL, the proto-context in the corresponding slot in
proto_context_xa. Then, whenever we go to look up a context, we first
check context_xa. If it's there, we return the i915_gem_context and
we're done. If it's not, we look in proto_context_xa and, if we find it
there, we create the actual context and kill the proto-context.
In order for this dance to work properly, everything which ever touches
a proto-context is guarded by drm_i915_file_private::proto_context_lock,
including context creation. Yes, this means context creation now takes
a giant global lock but it can't really be helped and that should never
be on any driver's fast-path anyway.
v2 (Daniel Vetter):
- Commit message grammatical fixes.
- Use WARN_ON instead of GEM_BUG_ON
- Rename lazy_create_context_locked to finalize_create_context_locked
- Rework the control-flow logic in the setparam ioctl
- Better documentation all around
v3 (kernel test robot):
- Make finalize_create_context_locked static
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-25-jason@jlekstrand.net
There's a big comment saying how useful it is but no one is using this
for anything anymore.
It was added in 2bfa996e03 ("drm/i915: Store owning file on the
i915_address_space") and used for debugfs at the time as well as telling
the difference between the global GTT and a PPGTT. In f6e8aa3871
("drm/i915: Report the number of closed vma held by each context in
debugfs") we removed one use of it by switching to a context walk and
comparing with the VM in the context. Finally, VM stats for debugfs
were entirely nuked in db80a1294c ("drm/i915/gem: Remove per-client
stats from debugfs/i915_gem_objects")
v2 (Daniel Vetter):
- Delete a struct drm_i915_file_private pre-declaration
- Add a comment to the commit message about history
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-24-jason@jlekstrand.net
This means that the proto-context needs to grow support for engine
configuration information as well as setparam logic. Fortunately, we'll
be deleting a lot of setparam logic on the primary context shortly so it
will hopefully balance out.
There's an extra bit of fun here when it comes to setting SSEU and the
way it interacts with PARAM_ENGINES. Unfortunately, thanks to
SET_CONTEXT_PARAM and not being allowed to pick the order in which we
handle certain parameters, we have think about those interactions.
v2 (Daniel Vetter):
- Add a proto_context_free_user_engines helper
- Comment on SSEU in the commit message
- Use proto_context_set_persistence in set_proto_ctx_param
v3 (Daniel Vetter):
- Fix a doc comment
- Do an explicit HAS_FULL_PPGTT check in set_proto_ctx_vm instead of
relying on pc->vm != NULL.
- Handle errors for CONTEXT_PARAM_PERSISTENCE
- Don't allow more resetting user engines
- Rework initialization of UCONTEXT_PERSISTENCE
v4 (Jason Ekstrand):
- Move hand-rolled initialization of UCONTEXT_PERSISTENCE to an
earlier patch
v5 (Jason Ekstrand):
- Move proto_context_set_persistence to this patch
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-22-jason@jlekstrand.net
What we really want to check is that size of the engines array, i.e.
args->size - sizeof(*user) is divisible by the element size, i.e.
sizeof(*user->engines) because that's what's required for computing the
array length right below the check. However, we're currently not doing
this and instead doing a compile-time check that sizeof(*user) is
divisible by sizeof(*user->engines) and avoiding the subtraction. As
far as I can tell, the only reason for the more confusing pair of checks
is to avoid a single subtraction of a constant.
The other thing the BUILD_BUG_ON might be trying to implicitly check is
that offsetof(user->engines) == sizeof(*user) and we don't have any
weird padding throwing us off. However, that's not the check it's doing
and it's not even a reliable way to do that check.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-21-jason@jlekstrand.net
The current context uAPI allows for two methods of setting context
parameters: SET_CONTEXT_PARAM and CONTEXT_CREATE_EXT_SETPARAM. The
former is allowed to be called at any time while the later happens as
part of GEM_CONTEXT_CREATE. Currently, everything settable via one is
settable via the other. While some params are fairly simple and setting
them on a live context is harmless such the context priority, others are
far trickier such as the VM or the set of engines. In order to swap out
the VM, for instance, we have to delay until all current in-flight work
is complete, swap in the new VM, and then continue. This leads to a
plethora of potential race conditions we'd really rather avoid.
Unfortunately, both methods of setting the VM and the engine set are in
active use today so we can't simply disallow setting the VM or engine
set vial SET_CONTEXT_PARAM. In order to work around this wart, this
commit adds a proto-context struct which contains all the context create
parameters.
v2 (Daniel Vetter):
- Better commit message
- Use __set/clear_bit instead of set/clear_bit because there's no race
and we don't need the atomics
v3 (Daniel Vetter):
- Use manual bitops and BIT() instead of __set_bit
v4 (Daniel Vetter):
- Add a changelog to the commit message
- Better hyperlinking in docs
- Create the default PPGTT in i915_gem_create_context
v5 (Daniel Vetter):
- Hand-roll the initialization of UCONTEXT_PERSISTENCE
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-17-jason@jlekstrand.net
As far as I can tell, the only real reason for this is to avoid taking a
reference to the i915_gem_context. The cost of those two atomics
probably pales in comparison to the cost of the ioctl itself so we're
really not buying ourselves anything here. We're about to make context
lookup a tiny bit more complicated, so let's get rid of the one hand-
rolled case.
Some usermode drivers such as our Vulkan driver call GET_RESET_STATS on
every execbuf so the perf here could theoretically be an issue. If this
ever does become a performance issue for any such userspace drivers,
they can use set CONTEXT_PARAM_RECOVERABLE to false and look for -EIO
coming from execbuf to check for hangs instead.
v2 (Daniel Vetter):
- Add a comment in the commit message about recoverable contexts
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-14-jason@jlekstrand.net
Even though FENCE_SUBMIT is only documented to wait until the request in
the in-fence starts instead of waiting until it completes, it has a bit
more magic than that. If FENCE_SUBMIT is used to submit something to a
balanced engine, we would wait to assign engines until the primary
request was ready to start and then attempt to assign it to a different
engine than the primary. There is an IGT test (the bonded-slice subtest
of gem_exec_balancer) which exercises this by submitting a primary batch
to a specific VCS and then using FENCE_SUBMIT to submit a secondary
which can run on any VCS and have i915 figure out which VCS to run it on
such that they can run in parallel.
However, this functionality has never been used in the real world. The
media driver (the only user of FENCE_SUBMIT) always picks exactly two
physical engines to bond and never asks us to pick which to use.
v2 (Daniel Vetter):
- Mention the exact IGT test this breaks
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-11-jason@jlekstrand.net
This adds a bunch of complexity which the media driver has never
actually used. The media driver does technically bond a balanced engine
to another engine but the balanced engine only has one engine in the
sibling set. This doesn't actually result in a virtual engine.
This functionality was originally added to handle cases where we may
have more than two video engines and media might want to load-balance
their bonded submits by, for instance, submitting to a balanced vcs0-1
as the primary and then vcs2-3 as the secondary. However, no such
hardware has shipped thus far and, if we ever want to enable such
use-cases in the future, we'll use the up-and-coming parallel submit API
which targets GuC submission.
This makes I915_CONTEXT_ENGINES_EXT_BOND a total no-op. We leave the
validation code in place in case we ever decide we want to do something
interesting with the bonding information.
v2 (Jason Ekstrand):
- Don't delete quite as much code.
v3 (Tvrtko Ursulin):
- Add some history to the commit message
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-10-jason@jlekstrand.net
This has never been used by any userspace except IGT and provides no
real functionality beyond parroting back parameters userspace passed in
as part of context creation or via setparam. If the context is in
legacy mode (where you use I915_EXEC_RENDER and friends), it returns
success with zero data so it's not useful for discovering what engines
are in the context. It's also not a replacement for the recently
removed I915_CONTEXT_CLONE_ENGINES because it doesn't return any of the
balancing or bonding information.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-9-jason@jlekstrand.net
This API is entirely unnecessary and I'd love to get rid of it. If
userspace wants a single timeline across multiple contexts, they can
either use implicit synchronization or a syncobj, both of which existed
at the time this feature landed. The justification given at the time
was that it would help GL drivers which are inherently single-timeline.
However, neither of our GL drivers actually wanted the feature. i965
was already in maintenance mode at the time and iris uses syncobj for
everything.
Unfortunately, as much as I'd love to get rid of it, it is used by the
media driver so we can't do that. We can, however, do the next-best
thing which is to embed a syncobj in the context and do exactly what
we'd expect from userspace internally. This isn't an entirely identical
implementation because it's no longer atomic if userspace races with
itself by calling execbuffer2 twice simultaneously from different
threads. It won't crash in that case; it just doesn't guarantee any
ordering between those two submits. It also means that sync files
exported from different engines on a SINGLE_TIMELINE context will have
different fence contexts. This is visible to userspace if it looks at
the obj_name field of sync_fence_info.
Moving SINGLE_TIMELINE to a syncobj emulation has a couple of technical
advantages beyond mere annoyance. One is that intel_timeline is no
longer an api-visible object and can remain entirely an implementation
detail. This may be advantageous as we make scheduler changes going
forward. Second is that, together with deleting the CLONE_CONTEXT API,
we should now have a 1:1 mapping between intel_context and
intel_timeline which may help us reduce locking.
v2 (Tvrtko Ursulin):
- Update the comment on i915_gem_context::syncobj to mention that it's
an emulation and the possible race if userspace calls execbuffer2
twice on the same context concurrently.
v2 (Jason Ekstrand):
- Wrap the checks for eb.gem_context->syncobj in unlikely()
- Drop the dma_fence reference
- Improved commit message
v3 (Jason Ekstrand):
- Move the dma_fence_put() to before the error exit
v4 (Tvrtko Ursulin):
- Add a comment about fence contexts to the commit message
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-8-jason@jlekstrand.net
This API allows one context to grab bits out of another context upon
creation. It can be used as a short-cut for setparam(getparam()) for
things like I915_CONTEXT_PARAM_VM. However, it's never been used by any
real userspace. It's used by a few IGT tests and that's it. Since it
doesn't add any real value (most of the stuff you can CLONE you can copy
in other ways), drop it.
There is one thing that this API allows you to clone which you cannot
clone via getparam/setparam: timelines. However, timelines are an
implementation detail of i915 and not really something that needs to be
exposed to userspace. Also, sharing timelines between contexts isn't
obviously useful and supporting it has the potential to complicate i915
internally. It also doesn't add any functionality that the client can't
get in other ways. If a client really wants a shared timeline, they can
use a syncobj and set it as an in and out fence on every submit.
v2 (Jason Ekstrand):
- More detailed commit message
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-7-jason@jlekstrand.net
Instead of handling it like a context param, unconditionally set it when
intel_contexts are created. For years we've had the idea of a watchdog
uAPI floating about. The aim was for media, so that they could set very
tight deadlines for their transcodes jobs, so that if you have a corrupt
bitstream (especially for decoding) you don't hang your desktop too
hard. But it's been stuck in limbo since forever, and this simplifies
things a bit in preparation for the proto-context work. If we decide to
actually make said uAPI a reality, we can do it through the proto-
context easily enough.
This does mean that we move from reading the request_timeout_ms param
once per engine when engines are created instead of once at context
creation. If someone changes request_timeout_ms between creating a
context and setting engines, it will mean that they get the new timeout.
If someone races setting request_timeout_ms and context creation, they
can theoretically end up with different timeouts. However, since both
of these are fairly harmless and require changing kernel params, we
don't care.
v2 (Tvrtko Ursulin):
- Add a comment about races with request_timeout_ms
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-5-jason@jlekstrand.net
Previously, we were storing the ring size in the ring pointer before it
was actually allocated. We would then guard setting the ring size on
checking for CONTEXT_ALLOC_BIT. This is error-prone at best and really
only saves us a few bytes on something that already burns at least 4K.
Instead, this patch adds a new ring_size field and makes everything use
that.
v2 (Daniel Vetter):
- Replace 512 * SZ_4K with SZ_2M
v2 (Jason Ekstrand):
- Rebase on top of page migration code
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-3-jason@jlekstrand.net
This reverts commit 88be76cdaf ("drm/i915: Allow userspace to specify
ringsize on construction"). This API was originally added for OpenCL
but the compute-runtime PR has sat open for a year without action so we
can still pull it out if we want. I argue we should drop it for three
reasons:
1. If the compute-runtime PR has sat open for a year, this clearly
isn't that important.
2. It's a very leaky API. Ring size is an implementation detail of the
current execlist scheduler and really only makes sense there. It
can't apply to the older ring-buffer scheduler on pre-execlist
hardware because that's shared across all contexts and it won't
apply to the GuC scheduler that's in the pipeline.
3. Having userspace set a ring size in bytes is a bad solution to the
problem of having too small a ring. There is no way that userspace
has the information to know how to properly set the ring size so
it's just going to detect the feature and always set it to the
maximum of 512K. This is what the compute-runtime PR does. The
scheduler in i915, on the other hand, does have the information to
make an informed choice. It could detect if the ring size is a
problem and grow it itself. Or, if that's too hard, we could just
increase the default size from 16K to 32K or even 64K instead of
relying on userspace to do it.
Let's drop this API for now and, if someone decides they really care
about solving this problem, they can do it properly.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-2-jason@jlekstrand.net
Pull drm updates from Dave Airlie:
"Highlights:
- AMD enables two more GPUs, with resulting header files
- i915 has started to move to TTM for discrete GPU and enable DG1
discrete GPU support (not by default yet)
- new HyperV drm driver
- vmwgfx adds arm64 support
- TTM refactoring ongoing
- 16bpc display support for AMD hw
Otherwise it's just the usual insane amounts of work all over the
place in lots of drivers and the core, as mostly summarised below:
Core:
- mark AGP ioctls as legacy
- disable force probing for non-master clients
- HDR metadata property helpers
- HDMI infoframe signal colorimetry support
- remove drm_device.pdev pointer
- remove DRM_KMS_FB_HELPER config option
- remove drm_pci_alloc/free
- drm_err_*/drm_dbg_* helpers
- use drm driver names for fbdev
- leaked DMA handle fix
- 16bpc fixed point format fourcc
- add prefetching memcpy for WC
- Documentation fixes
aperture:
- add aperture ownership helpers
dp:
- aux fixes
- downstream 0 port handling
- use extended base receiver capability DPCD
- Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec
- mst: use khz as link rate during init
- VCPI fixes for StarTech hub
ttm:
- provide tt_shrink file via debugfs
- warn about freeing pinned BOs
- fix swapping error handling
- move page alignment into BO
- cleanup ttm_agp_backend
- add ttm_sys_manager
- don't override vm_ops
- ttm_bo_mmap removed
- make ttm_resource base of all managers
- remove VM_MIXEDMAP usage
panel:
- sysfs_emit support
- simple: runtime PM support
- simple: power up panel when reading EDID + caching
bridge:
- MHDP8546: HDCP support + DT bindings
- MHDP8546: Register DP AUX channel with userspace
- TI SN65DSI83 + SN65DSI84: add driver
- Sil8620: Fix module dependencies
- dw-hdmi: make CEC driver loading optional
- Ti-sn65dsi86: refclk fixes, subdrivers, runtime pm
- It66121: Add driver + DT bindings
- Adv7511: Support I2S IEC958 encoding
- Anx7625: fix power-on delay
- Nwi-dsi: Modesetting fixes; Cleanups
- lt6911: add missing MODULE_DEVICE_TABLE
- cdns: fix PM reference leak
hyperv:
- add new DRM driver for HyperV graphics
efifb:
- non-PCI device handling fixes
i915:
- refactor IP/device versioning
- XeLPD Display IP preperation work
- ADL-P enablement patches
- DG1 uAPI behind BROKEN
- disable mmap ioctl for discerte GPUs
- start enabling HuC loading for Gen12+
- major GuC backend rework for new platforms
- initial TTM support for Discrete GPUs
- locking rework for TTM prep
- use correct max source link rate for eDP
- %p4cc format printing
- GLK display fixes
- VLV DSI panel power fixes
- PSR2 disabled for RKL and ADL-S
- ACPI _DSM invalid access fixed
- DMC FW path abstraction
- ADL-S PCI ID update
- uAPI headers converted to kerneldoc
- initial LMEM support for DG1
- x86/gpu: add Jasperlake to gen11 early quirks
amdgpu:
- Aldebaran updates + initial SR-IOV
- new GPU: Beige Goby and Yellow Carp support
- more LTTPR display work
- Vangogh updates
- SDMA 5.x GCR fixes
- PCIe ASPM support
- Renoir TMZ enablement
- initial multiple eDP panel support
- use fdinfo to track devices/process info
- pin/unpin TTM fixes
- free resource on fence usage query
- fix fence calculation
- fix hotunplug/suspend issues
- GC/MM register access macro cleanup for SR-IOV
- W=1 fixes
- ACPI ATCS/ATIF handling rework
- 16bpc fixed point format support
- Initial smartshift support
- RV/PCO power tuning fixes
- new INFO query for additional vbios info
amdkfd:
- SR-IOV aldebaran support
- HMM SVM support
radeon:
- SMU regression fixes
- Oland flickering fix
vmwgfx:
- enable console with fbdev emulation
- fix cpu updates of coherent multisample surfaces
- remove reservation semaphore
- add initial SVGA3 support
- support arm64
msm:
- devcoredump support for display errors
- dpu/dsi: yaml bindings conversion
- mdp5: alpha/blend_mode/zpos support
- a6xx: cached coherent buffer support
- gpu iova fault improvement
- a660 support
rockchip:
- RK3036 win1 scaling support
- RK3066/3188 missing register support
- RK3036/3066/3126/3188 alpha support
mediatek:
- MT8167 HDMI support
- MT8183 DPI dual edge support
tegra:
- fixed YUV support/scaling on Tegra186+
ast:
- use pcim_iomap
- fix DP501 EDID
bochs:
- screen blanking support
etnaviv:
- export more GPU ID values to userspace
- add HWDB entry for GPU on i.MX8MP
- rework linear window calcs
exynos:
- pm runtime changes
imx:
- Annotate dma_fence critical section
- fix PRG modifiers after drmm conversion
- Add 8 pixel alignment fix for 1366x768
- fix YUV advertising
- add color properties
ingenic:
- IPU planes fix
panfrost:
- Mediatek MT8183 support + DT bindings
- export AFBC_FEATURES register to userspace
simpledrm:
- %pr for printing resources
nouveau:
- pin/unpin TTM fixes
qxl:
- unpin shadow BO
virtio:
- create dumb BOs as guest blob
vkms:
- drmm_universal_plane_alloc
- add XRGB plane composition
- overlay support"
* tag 'drm-next-2021-07-01' of git://anongit.freedesktop.org/drm/drm: (1570 commits)
drm/i915: Reinstate the mmap ioctl for some platforms
drm/i915/dsc: abstract helpers to get bigjoiner primary/secondary crtc
Revert "drm/msm/mdp5: provide dynamic bandwidth management"
drm/msm/mdp5: provide dynamic bandwidth management
drm/msm/mdp5: add perf blocks for holding fudge factors
drm/msm/mdp5: switch to standard zpos property
drm/msm/mdp5: add support for alpha/blend_mode properties
drm/msm/mdp5: use drm_plane_state for pixel blend mode
drm/msm/mdp5: use drm_plane_state for storing alpha value
drm/msm/mdp5: use drm atomic helpers to handle base drm plane state
drm/msm/dsi: do not enable PHYs when called for the slave DSI interface
drm/msm: Add debugfs to trigger shrinker
drm/msm/dpu: Avoid ABBA deadlock between IRQ modules
drm/msm: devcoredump iommu fault support
iommu/arm-smmu-qcom: Add stall support
drm/msm: Improve the a6xx page fault handler
iommu/arm-smmu-qcom: Add an adreno-smmu-priv callback to get pagefault info
iommu/arm-smmu: Add support for driver IOMMU fault handlers
drm/msm: export hangcheck_period in debugfs
drm/msm/a6xx: add support for Adreno 660 GPU
...
For some specialised objects we might need something larger than the
regions min_page_size due to some hw restriction, and slightly more
hairy is needing something smaller with the guarantee that such objects
will never be inserted into any GTT, which is the case for the paging
structures.
This also fixes how we setup the BO page_alignment, if we later migrate
the object somewhere else. For example if the placements are {SMEM,
LMEM}, then we might get this wrong. Pushing the min_page_size behaviour
into the manager should fix this.
v2(Thomas): push the default page size behaviour into buddy_man, and let
the user override it with the page-alignment, which looks cleaner
v3: rebase on ttm sys changes
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625103824.558481-1-matthew.auld@intel.com
Introduce an interface to migrate objects between regions.
This is primarily intended to migrate objects to LMEM for display and
to SYSTEM for dma-buf, but might be reused in one form or another for
performance-based migration.
v2:
- Verify that the memory region given as an id really exists.
(Reported by Matthew Auld)
- Call i915_gem_object_{init,release}_memory_region() when switching region
to handle also switching region lists. (Reported by Matthew Auld)
v3:
- Fix i915_gem_object_can_migrate() to return true if object is already in
the correct region, even if the object ops doesn't have a migrate()
callback.
- Update typo in commit message.
- Fix kerneldoc of i915_gem_object_wait_migration().
v4:
- Improve documentation (Suggested by Mattew Auld and Michael Ruhl)
- Always assume TTM migration hits a TTM move and unsets the pages through
move_notify. (Reported by Matthew Auld)
- Add a dma_fence_might_wait() annotation to
i915_gem_object_wait_migration() (Suggested by Daniel Vetter)
v5:
- Re-add might_sleep() instead of __dma_fence_might_wait(), Sent
v4 with the wrong version, didn't compile and __dma_fence_might_wait()
is not exported.
- Added an R-B.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210629151203.209465-2-thomas.hellstrom@linux.intel.com
For discrete, use TTM for both cached and WC system memory. That means
we currently rely on the TTM memory accounting / shrinker. For cached
system memory we should consider remaining shmem-backed, which can be
implemented from our ttm_tt_populate callback. We can then also reuse our
own very elaborate shrinker for that memory.
If an object is evicted to a gem allowable region, we will now consider
the object migrated, and we flip the gem region and move the object to a
different region list. Since we are now changing gem regions, we can't
any longer rely on the CONTIGUOUS flag being set based on the region
min page size, so remove that flag update. If we want to reintroduce it,
we need to put it in the mutable flags.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624084240.270219-4-thomas.hellstrom@linux.intel.com
After a TTM move or object init we need to update the i915 gem flags and
caching settings to reflect the new placement. Currently caching settings
are not changed during the lifetime of an object, although that might
change moving forward if we run into performance issues or issues with
WC system page allocations.
Also introduce gpu_binds_iomem() and cpu_maps_iomem() to clean up the
various ways we previously used to detect this.
Finally, initialize the TTM object reserved to be able to update
flags and caching before anyone else gets hold of the object.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624084240.270219-3-thomas.hellstrom@linux.intel.com
In
commit ebc0808fa2
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Oct 18 13:02:51 2016 +0100
drm/i915: Restrict pagefault disabling to just around copy_from_user()
we entirely missed that there's a slow path call to eb_relocate_entry
(or i915_gem_execbuffer_relocate_entry as it was called back then)
which was left fully wrapped by pagefault_disable/enable() calls.
Previously any issues with blocking calls where handled by the
following code:
/* we can't wait for rendering with pagefaults disabled */
if (pagefault_disabled() && !object_is_idle(obj))
return -EFAULT;
Now at this point the prefaulting was still around, which means in
normal applications it was very hard to hit this bug. No idea why the
regressions in igts weren't caught.
Now this all changed big time with 2 patches merged closely together.
First
commit 2889caa923
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Jun 16 15:05:19 2017 +0100
drm/i915: Eliminate lots of iterations over the execobjects array
removes the prefaulting from the first relocation path, pushing it into
the first slowpath (of which this patch added a total of 3 escalation
levels). This would have really quickly uncovered the above bug, were
it not for immediate adding a duct-tape on top with
commit 7dd4f6729f
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Jun 16 15:05:24 2017 +0100
drm/i915: Async GPU relocation processing
by pushing all all the relocation patching to the gpu if the buffer
was busy, which avoided all the possible blocking calls.
The entire slowpath was then furthermore ditched in
commit 7dc8f11437
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Mar 11 16:03:10 2020 +0000
drm/i915/gem: Drop relocation slowpath
and resurrected in
commit fd1500fcd4
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date: Wed Aug 19 16:08:43 2020 +0200
Revert "drm/i915/gem: Drop relocation slowpath".
but this did not further impact what's going on.
Since pagefault_disable/enable is an atomic section, any sleeping in
there is prohibited, and we definitely do that without gpu relocations
since we have to wait for the gpu usage to finish before we can patch
up the relocations.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210618214503.1773805-1-daniel.vetter@ffwll.ch
We have assumed that if the current placement was not the requested
placement, but instead one of the busy placements, a TTM move would have
been triggered. That is not the case.
So when we initially place LMEM objects in "Limbo", (that is system
placement without any pages allocated), to be able to defer clearing
objects until first get_pages(), the first get_pages() would happily keep
objects in system memory if that is one of the allowed placements. And
since we don't yet support i915 GEM system memory from TTM, everything
breaks apart.
So make sure we try the requested placement first, if no eviction is
needed. If that fails, retry with all allowed placements also allowing
evictions. Also make sure we handle TTM failure codes correctly.
Also temporarily (until we support i915 GEM system on TTM), restrict
allowed placements to the requested placement to avoid things falling
apart should LMEM be full.
Fixes: 38f28c0695 ("drm/i915/ttm: Calculate the object placement at get_pages time")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210618132515.163277-1-thomas.hellstrom@linux.intel.com
Since the ww transaction endpoint easily end up far out-of-scope of
the objects on the ww object list, particularly for contending lock
objects, make sure we reference objects on the list so they don't
disappear under us.
This comes with a performance penalty so it's been debated whether this
is really needed. But I think this is motivated by the fact that locking
is typically difficult to get right, and whatever we can do to make it
simpler for developers moving forward should be done, unless the
performance impact is far too high.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617063018.92802-2-thomas.hellstrom@linux.intel.com
