[Bug][AST2500]
V1:
When AST2500 acts as stand-alone VGA so that DRAM and DVO initialization
have to be achieved by VGA driver with P2A (PCI to AHB) enabling.
However, HW suggests disable Fast reset mode after DRAM initializaton,
because fast reset mode is mainly designed for ARM ICE debugger.
Once Fast reset is checked as enabling, WDT (Watch Dog Timer) should be
first enabled to avoid system deadlock before disable fast reset mode.
V2:
Use to_pci_dev() to get revision of PCI configuration.
V3:
If SCU00 is not unlocked, just enter its password again.
It is unnecessary to clear AHB lock condition and restore WDT default
setting again, before Fast-reset clearing.
V4:
repatch after "error : could not build fake ancestor" resolved.
V5:
Since CVE_2019_6260 item3, Most of AST2500 have disabled P2A(PCIe to AMBA).
However, for backward compatibility, some patches about P2A, such as items
of v5.2 and v5.3, are considered to be upstreamed with comments.
1. Add define macro to improve source readability.
ast_drv.h, ast_main.c, ast_post.c
2. Add comment about "Fast restet" is enabled for ARM-ICE debugger
ast_post.c
3. Add comment about Reset USB port to patch USB unknown device issue
ast_post.c
Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210709080900.4056-1-kuohsiang_chou@aspeedtech.com
[Bug][DP501]
If ASPEED P2A (PCI to AHB) bridge is disabled and disallowed for
CVE_2019_6260 item3, and then the monitor's EDID is unable read through
Parade DP501.
The reason is the DP501's FW is mapped to BMC addressing space rather
than Host addressing space.
The resolution is that using "pci_iomap_range()" maps to DP501's FW that
stored on the end of FB (Frame Buffer).
In this case, FrameBuffer reserves the last 2MB used for the image of
DP501.
Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421085859.17761-1-kuohsiang_chou@aspeedtech.com
The BOs of the hardware cursor are now mapped permanently while the
cursor plane is being used. This reduces the CPU overhead of the cursor
plane's atomic_update function.
The change also resolves a problem with the vmap call in the commit tail.
The vmap implementation could acquire the DMA reservation lock on the
BO, which is not allowed that late in the atomic update. Removing the
vmap call from atomic_update fixes the issue.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-9-tzimmermann@suse.de
The HW cursor's BO used to be mapped permanently into the kernel's
address space. GEM's vmap operation will be protected by locks, and
we don't want to lock the BO's for an indefinate period of time.
Change the cursor code to map the HW BOs only during updates. The
vmap operation in VRAM helpers is cheap, as a once estabished mapping
is being reused until the BO actually moves. As the HW cursor BOs are
permanently pinned, they never move at all.
v2:
* fix typos in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201209142527.26415-3-tzimmermann@suse.de
This patch replaces the vmap/vunmap's use of raw pointers in GEM object
functions with instances of struct dma_buf_map. GEM backends are
converted as well. For most of them, this simply changes the returned type.
TTM-based drivers now return information about the location of the memory,
either system or I/O memory. GEM VRAM helpers and qxl now use ttm_bo_vmap()
et al. Amdgpu, nouveau and radeon use drm_gem_ttm_vmap() et al instead of
implementing their own vmap callbacks.
v7:
* init QXL cursor to mapped BO buffer (kernel test robot)
v5:
* update vkms after switch to shmem
v4:
* use ttm_bo_vmap(), drm_gem_ttm_vmap(), et al. (Daniel, Christian)
* fix a trailing { in drm_gem_vmap()
* remove several empty functions instead of converting them (Daniel)
* comment uses of raw pointers with a TODO (Daniel)
* TODO list: convert more helpers to use struct dma_buf_map
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-7-tzimmermann@suse.de
The ast HW cursor requires the primary plane and CRTC to display at
a valid mode and format. This is not the case while switching
display modes, which can lead to the screen turing permanently dark.
As a workaround, the ast driver now disables active planes while the
mode or format switch takes place. It also synchronizes with the vertical
refresh to give CRTC and planes some time to catch up on each other.
The active planes planes (primary or cursor) will be re-enabled by
each plane's atomic_update() function.
v3:
* move the logic into the CRTC's atomic_disable function
v2:
* move the logic into the commit-tail function
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-3-tzimmermann@suse.de
The ast driver's load and unload functions are left-overs from when
struct drm_driver.load/unload was still in use. The PCI probe helper
allocated the DRM device and ran load to initialize it.
This patch replaces this code with device create and destroy. The
main difference is that the device's create function allocates the
DRM device and ast structures in the same place. This will be required
for switching ast to managed allocations.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-4-tzimmermann@suse.de
Updating the image in a cursor's HW BO requires a mapping of the BO's
buffer in the kernel's address space. Cursor image updates can happen
frequently and create CPU overhead.
As cursor HW BOs are small and never move, they are now map exactly
once during the initialization and the mapping is used throughout the
driver's lifetime.
This change also removes a possible source of failures from
ast_cursor_show(). As the helper does not establish mappings, it cannot
fail. As a result, the cursor plane's atomic-update helper does not
call any failable interfaces. All failures are detected before trying
to update the cursor plane.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-10-tzimmermann@suse.de
Having a cursor move function is misleading, as it actually enables the
cursor's image for displaying. So rename it to ast_cursor_show(). It's
semantics is to show a cursor at the specified location on the screen.
The displayed cursor is always the image in the cursor front BO.
This change also simplifies struct ast_crtc to being a mere wrapper around
around struct drm_crtc. It will be removed by a later patch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-7-tzimmermann@suse.de
The new helper ast_cursor_blit() updates a cursor's backbuffer HW
BO from a framebuffer structure. The cursor plane's prepare_fb()
function now uses the new interface.
Pinning and mapping of BOs is done automatically by the helper. This
includes the source BO, which was not pinned by the original code in
prepare_fb().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-4-tzimmermann@suse.de
Reading the primary plane's framebuffer from the CRTC's atomic_flush()
function is fragile as the plane state or framebuffer can be NULL.
Instead, we let the plane's atomic_check() store the framebuffer format
in the CRTC state. The CRTC always receives the framebuffer format that
is currently programmed, or NULL if no mode has been set yet.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191202111557.15176-8-tzimmermann@suse.de
Like the original mode-setting code, the primary plane supports XRGB888,
RGB565 and C8. The plane itself only pins BOs and sets the base address
and scanline offset. The mode-setting code will be located in the CRTC's
atomic helpers.
v2:
* don't set plane call-back functions to NULL explicitly
* define plane format array in global scope
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-7-tzimmermann@suse.de
By putting cursor BOs at the high end of the video memory, we can avoid
memory fragmentation. Starting at the low end, contiguous video memory is
available for framebuffers.
The patch also simplifies the buffer swapping by splitting
struct ast_private.cursor_cache BO into two separate boffer objects. Cursor
images alternate between these buffers instead of offsets within cursor_cache.
v3:
* fixes space-before-tab error near AST_HWC_SIGNATURE_CHECKSUM
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927090309.10254-6-tzimmermann@suse.de
This patch replaces ast's framebuffer console with DRM's generic
implememtation. All respective code is being removed from the driver.
The console is set up with a shadow buffer. The actual buffer object is
not permanently pinned in video ram, but just another buffer object that
the driver moves in and out of vram as necessary. The driver's function
ast_crtc_do_set_base() used to contain special handling for the framebuffer
console. With the new generic framebuffer, the driver does not need this
code an longer.
v2:
* use drm_fb_helper_set_suspend_unlocked() in ast_drm_{thaw,freeze}()
* dirty function no longer required
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315835/
The data structure |struct drm_vram_mm| and its helpers replace ast's
TTM-based memory manager. It's the same implementation; except for the
type names.
v4:
* don't select DRM_TTM or DRM_VRAM_MM_HELPER
v3:
* use drm_gem_vram_mm_funcs
* convert driver to drm_device-based instance
v2:
* implement ast_mmap() with drm_vram_mm_mmap()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20190508082630.15116-11-tzimmermann@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
