Currently ACPI power domain brings devices into D0 state in the "resume
early" phase. Normally this does not cause any issues, as powering up
happens quickly. However there are peripherals that have certain timing
requirements for powering on, for example some models of Elan
touchscreens need 300msec after powering up/releasing reset line before
they can accept commands from the host. Such devices will dominate
the time spent in early resume phase and cause increase in overall
resume time as we wait for early resume to complete before we can
proceed to the normal resume stage.
There are ways for a driver to indicate that it can tolerate device
being in the low power mode and that it knows how to power the device
back up when resuming, bit that requires changes to individual drivers
that may not really care about details of ACPI controlled power
management.
This change attempts to solve this issue at ACPI power domain level, by
postponing powering up device until we get to the normal resume stage,
unless there is early resume handler defined for the device, or device
does not declare any resume handlers, in which case we continue powering
up such devices early. This allows us to shave off several hundred
milliseconds of resume time on affected systems.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A custom DSDT file is mostly used during development or debugging,
and in that case it is quite likely to want to rebuild the kernel
after changing ONLY the content of the DSDT.
This patch adds the custom DSDT as a prerequisite to tables.o
to ensure a rebuild if the DSDT file is updated. Make will merge
the prerequisites from multiple rules for the same target.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
sysfs_emit is preferred to snprintf for emitting values after
commit 2efc459d06 ("sysfs: Add sysfs_emit and sysfs_emit_at to format
sysfs output").
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
clang's Control Flow Integrity requires that every indirect call has a
valid target, which is based on the type of the function pointer. The
*_show() functions in this file are written as if they will be called
from dev_attr_show(); however, they will be called from
sysfs_kf_seq_show() because the files were created by
sysfs_create_group() and the sysfs ops are based on kobj_sysfs_ops
because of kobject_add_and_create(). Because the *_show() functions do
not match the type of the show() member in struct kobj_attribute, there
is a CFI violation.
$ cat /sys/firmware/acpi/bgrt/{status,type,version,{x,y}offset}}
1
0
1
522
307
$ dmesg | grep "CFI failure"
[ 267.761825] CFI failure (target: type_show.d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
[ 267.762246] CFI failure (target: xoffset_show.d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
[ 267.762584] CFI failure (target: status_show.d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
[ 267.762973] CFI failure (target: yoffset_show.d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
[ 267.763330] CFI failure (target: version_show.d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
Convert these functions to the type of the show() member in struct
kobj_attribute so that there is no more CFI violation. Because these
functions are all so similar, combine them into a macro.
Fixes: d1ff4b1cdb ("ACPI: Add support for exposing BGRT data")
Link: https://github.com/ClangBuiltLinux/linux/issues/1406
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On HP Pavilion Gaming Laptop 15-cx0xxx, the ECDT EC and DSDT EC share
the same port addresses but different GPEs. And the DSDT GPE is the
right one to use.
The current code duplicates DSDT EC with ECDT EC if the port addresses
are the same, and uses ECDT GPE as a result, which breaks this machine.
Introduce a new quirk for the HP laptop to trust the DSDT GPE,
and avoid duplicating even if the port addresses are the same.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209989
Reported-and-tested-by: Shao Fu, Chen <leo881003@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Notice that the table field of struct acpi_table_events_work is never
read and its event field is always equal to ACPI_TABLE_EVENT_LOAD, so
both of them are redundant.
Accordingly, drop struct acpi_table_events_work and use struct
work_struct directly instead of it, simplify acpi_scan_table_handler()
and rename it to acpi_scan_table_notify().
Moreover, make acpi_bus_table_handler() check the event code against
ACPI_TABLE_EVENT_LOAD before calling acpi_scan_table_notify(), so it
is not necessary to do that check in the latter.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Trivial conflicts in net/can/isotp.c and
tools/testing/selftests/net/mptcp/mptcp_connect.sh
scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c
to include/linux/ptp_clock_kernel.h in -next so re-apply
the fix there.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some AMD Systems with uPEP _HID AMD004/AMDI005 have an off by one bug
in their function mask return. This means that they will call entrance
but not exit for matching functions.
Other AMD systems with this HID should use the Microsoft generic UUID.
AMD systems with uPEP HID AMDI006 should be using the Microsoft method.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Refactor common code to prepare for upcoming changes.
* Remove unused struct.
* Print error before returning.
* Frees ACPI obj if _DSM type is not as expected.
* Treat lps0_dsm_func_mask as an integer rather than character
* Remove extra out_obj
* Move rev_id
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The param_get_trace_state() has a few dead code issues:
- 'return 0;' is never reachable
- a few 'else' keywords are redundant
Refactor param_get_trace_state() to drop dead code.
Note, leave one 'else' in order to have the best readability.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently we need to use as many acpi_mask_gpe options as we want to have
GPEs to be masked. Even with two it already becomes inconveniently large
the kernel command line.
Instead, allow acpi_mask_gpe to represent bitmap list.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Sparse is not happy about address space in use in acpi_data_show():
drivers/acpi/sysfs.c:428:14: warning: incorrect type in assignment (different address spaces)
drivers/acpi/sysfs.c:428:14: expected void [noderef] __iomem *base
drivers/acpi/sysfs.c:428:14: got void *
drivers/acpi/sysfs.c:431:59: warning: incorrect type in argument 4 (different address spaces)
drivers/acpi/sysfs.c:431:59: expected void const *from
drivers/acpi/sysfs.c:431:59: got void [noderef] __iomem *base
drivers/acpi/sysfs.c:433:30: warning: incorrect type in argument 1 (different address spaces)
drivers/acpi/sysfs.c:433:30: expected void *logical_address
drivers/acpi/sysfs.c:433:30: got void [noderef] __iomem *base
Indeed, acpi_os_map_memory() returns a void pointer with dropped specific
address space. Hence, we don't need to carry out __iomem in acpi_data_show().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Arm SMMU updates for 5.14
- SMMUv3:
* Support stalling faults for platform devices
* Decrease defaults sizes for the event and PRI queues
- SMMUv2:
* Support for a new '->probe_finalize' hook, needed by Nvidia
* Even more Qualcomm compatible strings
* Avoid Adreno TTBR1 quirk for DB820C platform
- Misc:
* Trivial cleanups/refactoring
If acpi_add_single_object() runs concurrently with respect to
acpi_scan_clear_dep() which deletes a dependencies list entry where
the device being added is the consumer, the device's dep_unmet
counter may not be updated to reflect that change.
Namely, if the dependencies list entry is deleted right after
calling acpi_scan_dep_init() and before calling acpi_device_add(),
acpi_scan_clear_dep() will not find the device object corresponding
to the consumer device ACPI handle and it will not update its
dep_unmet counter to reflect the deletion of the list entry.
Consequently, the dep_unmet counter of the device will never
become zero going forward which may prevent it from being
completely enumerated.
To address this problem, modify acpi_add_single_object() to run
acpi_tie_acpi_dev(), to attach the ACPI device object created by it
to the corresponding ACPI namespace node, under acpi_dep_list_lock
along with acpi_scan_dep_init() whenever the latter is called.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Move the invocation of acpi_attach_data() in acpi_device_add()
into a separate function.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
In general, acpi_bus_attach() can only be run safely under
acpi_scan_lock, but that lock cannot be acquired under
acpi_dep_list_lock, so make acpi_scan_clear_dep() schedule deferred
execution of acpi_bus_attach() under acpi_scan_lock instead of
calling it directly.
This also fixes a possible race between acpi_scan_clear_dep() and
device removal that might cause a device object that went away to
be accessed, because acpi_scan_clear_dep() is changed to acquire
a reference on the consumer device object.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Because acpi_walk_dep_device_list() is only called by the code in the
file in which it is defined, make it static, drop the export of it
and drop its header from acpi.h.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Make acpi_dev_get_first_consumer_dev_cb() a bit more straightforward
and rewrite the comment in it.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Since acpi_bus_put_acpi_device() is a synonym for acpi_dev_put(),
define it as static inline in analogy with the latter.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The sparse tool complains as follows:
drivers/acpi/prmt.c:53:1: warning:
symbol 'prm_module_list' was not declared. Should it be static?
This symbol is not used outside of prmt.c, so marks it static.
Fixes: cefc7ca462 ("ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fixes the following W=1 kernel build warning(s):
drivers/acpi/nvs.c:94: warning: Function parameter or
member 'start' not described in 'suspend_nvs_register'
drivers/acpi/nvs.c:94: warning: Function parameter or
member 'size' not described in 'suspend_nvs_register'
Signed-off-by: Baokun Li <libaokun1@huawei.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fixes the following W=1 kernel build warning(s):
drivers/acpi/device_sysfs.c:278: warning: Function parameter or
member 'dev' not described in 'acpi_device_uevent_modalias'
drivers/acpi/device_sysfs.c:278: warning: Function parameter or
member 'env' not described in 'acpi_device_uevent_modalias'
drivers/acpi/device_sysfs.c:323: warning: Function parameter or
member 'dev' not described in 'acpi_device_modalias'
drivers/acpi/device_sysfs.c:323: warning: Function parameter or
member 'buf' not described in 'acpi_device_modalias'
drivers/acpi/device_sysfs.c:323: warning: Function parameter or
member 'size' not described in 'acpi_device_modalias'
Signed-off-by: Baokun Li <libaokun1@huawei.com>
[ rjw: Fix spelling: acpi -> ACPI ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Before commit 8fcc4ae6fa ("arm64: acpi: Make apei_claim_sea()
synchronise with APEI's irq work"), do_sea() would unconditionally
signal the affected task from the arch code. Since that change,
the GHES driver sends the signals.
This exposes a problem as errors the GHES driver doesn't understand
or doesn't handle effectively are silently ignored. It will cause
the errors get taken again, and circulate endlessly. User-space task
get stuck in this loop.
Existing firmware on Kunpeng9xx systems reports cache errors with the
'ARM Processor Error' CPER records.
Do memory failure handling for ARM Processor Error Section just like
for Memory Error Section.
Fixes: 8fcc4ae6fa ("arm64: acpi: Make apei_claim_sea() synchronise with APEI's irq work")
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The messages printed by acpi_resume_power_resources() and
acpi_turn_off_unused_power_resources() are not important enough to be
printed with pr_info(), so use dev_dbg() instead of it to get rid of
some noise in the kernel log.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
AMD systems from Renoir and Lucienne require that the NVME controller
is put into D3 over a Modern Standby / suspend-to-idle
cycle. This is "typically" accomplished using the `StorageD3Enable`
property in the _DSD, but this property was introduced after many
of these systems launched and most OEM systems don't have it in
their BIOS.
On AMD Renoir without these drives going into D3 over suspend-to-idle
the resume will fail with the NVME controller being reset and a trace
like this in the kernel logs:
```
[ 83.556118] nvme nvme0: I/O 161 QID 2 timeout, aborting
[ 83.556178] nvme nvme0: I/O 162 QID 2 timeout, aborting
[ 83.556187] nvme nvme0: I/O 163 QID 2 timeout, aborting
[ 83.556196] nvme nvme0: I/O 164 QID 2 timeout, aborting
[ 95.332114] nvme nvme0: I/O 25 QID 0 timeout, reset controller
[ 95.332843] nvme nvme0: Abort status: 0x371
[ 95.332852] nvme nvme0: Abort status: 0x371
[ 95.332856] nvme nvme0: Abort status: 0x371
[ 95.332859] nvme nvme0: Abort status: 0x371
[ 95.332909] PM: dpm_run_callback(): pci_pm_resume+0x0/0xe0 returns -16
[ 95.332936] nvme 0000:03:00.0: PM: failed to resume async: error -16
```
The Microsoft documentation for StorageD3Enable mentioned that Windows has
a hardcoded allowlist for D3 support, which was used for these platforms.
Introduce quirks to hardcode them for Linux as well.
As this property is now "standardized", OEM systems using AMD Cezanne and
newer APU's have adopted this property, and quirks like this should not be
necessary.
CC: Shyam-sundar S-k <Shyam-sundar.S-k@amd.com>
CC: Alexander Deucher <Alexander.Deucher@amd.com>
CC: Prike Liang <prike.liang@amd.com>
Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Drop one redundant return statement and fix a few white space
issues.
Signed-off-by: Clayton Casciato <majortomtosourcecontrol@gmail.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix function name in sleep.c kernel-doc comment
to remove a warning found by running make W=1 LLVM=1.
drivers/acpi/sleep.c:413: warning: expecting prototype for
acpi_pre_suspend(). Prototype was for acpi_pm_pre_suspend() instead.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
'obj' is being initialized, however this value is never read as
'obj' is assigned an updated value later. Remove the redundant
initialization.
Clean up clang warning:
drivers/acpi/processor_throttling.c:409:20: warning: Value stored to
'obj' during its initialization is never read
[clang-analyzer-deadcode.DeadStores]
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In the unlikely event that there are no callback calls made in
acpi_walk_dep_device_list(), local variable ret will be returned as
an uninitialized value.
Clean up static analysis warnings by ensuring ret is initialized.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: a9e10e5873 ("ACPI: scan: Extend acpi_walk_dep_device_list()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
context->ret.pointer already gets set to NULL at the beginning of
acpi_run_osc() and it only gets assigned a new value in the success
path near the end of acpi_run_osc(), so the clearing of
context->ret.pointer (when status != AE_OK) at the end of
acpi_run_osc() is redundant since it will always already be NULL when
status != AE_OK.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Platform Runtime Mechanism (PRM) is a firmware interface that exposes
a set of binary executables that can either be called from the AML
interpreter or device drivers by bypassing the AML interpreter.
This change implements the AML interpreter path.
According to the specification [1], PRM services are listed in an
ACPI table called the PRMT. This patch parses module and handler
information listed in the PRMT and registers the PlatformRtMechanism
OpRegion handler before ACPI tables are loaded.
Each service is defined by a 16-byte GUID and called from writing a
26-byte ASL buffer containing the identifier to a FieldUnit object
defined inside a PlatformRtMechanism OperationRegion.
OperationRegion (PRMR, PlatformRtMechanism, 0, 26)
Field (PRMR, BufferAcc, NoLock, Preserve)
{
PRMF, 208 // Write to this field to invoke the OperationRegion Handler
}
The 26-byte ASL buffer is defined as the following:
Byte Offset Byte Length Description
=============================================================
0 1 PRM OperationRegion handler status
1 8 PRM service status
9 1 PRM command
10 16 PRM handler GUID
The ASL caller fills out a 26-byte buffer containing the PRM command
and the PRM handler GUID like so:
/* Local0 is the PRM data buffer */
Local0 = buffer (26){}
/* Create byte fields over the buffer */
CreateByteField (Local0, 0x9, CMD)
CreateField (Local0, 0x50, 0x80, GUID)
/* Fill in the command and data fields of the data buffer */
CMD = 0 // run command
GUID = ToUUID("xxxx-xx-xxx-xxxx")
/*
* Invoke PRM service with an ID that matches GUID and save the
* result.
*/
Local0 = (\_SB.PRMT.PRMF = Local0)
Byte offset 0 - 8 are written by the handler as a status passed back to AML
and used by ASL like so:
/* Create byte fields over the buffer */
CreateByteField (Local0, 0x0, PSTA)
CreateQWordField (Local0, 0x1, USTA)
In this ASL code, PSTA contains a status from the OperationRegion and
USTA contains a status from the PRM service.
The 26-byte buffer is recieved by acpi_platformrt_space_handler. This
handler will look at the command value and the handler guid and take
the approperiate actions.
Command value Action
=====================================================================
0 Run the PRM service indicated by the PRM handler
GUID (bytes 10-26)
1 Prevent PRM runtime updates from happening to the
service's parent module
2 Allow PRM updates from happening to the service's parent module
This patch enables command value 0.
Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1]
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The laptop keyboard doesn't work on many MEDION notebooks, but the
keyboard works well under Windows and Unix.
Through debugging, we found this log in the dmesg:
ACPI: IRQ 1 override to edge, high
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
And we checked the IRQ definition in the DSDT, it is:
IRQ (Level, ActiveLow, Exclusive, )
{1}
So the BIOS defines the keyboard IRQ to Level_Low, but the Linux
kernel override it to Edge_High. If the Linux kernel is modified
to skip the IRQ override, the keyboard will work normally.
From the existing comment in acpi_dev_get_irqresource(), the override
function only needs to be called when IRQ() or IRQNoFlags() is used
to populate the resource descriptor, and according to Section 6.4.2.1
of ACPI 6.4 [1], if IRQ() is empty or IRQNoFlags() is used, the IRQ
is High true, edge sensitive and non-shareable. ACPICA also assumes
that to be the case (see acpi_rs_set_irq[] in rsirq.c).
In accordance with the above, check 3 additional conditions
(EdgeSensitive, ActiveHigh and Exclusive) when deciding whether or
not to treat an ACPI_RESOURCE_TYPE_IRQ resource as "legacy", in which
case the IRQ override is applicable to it.
Link: https://uefi.org/specs/ACPI/6.4/06_Device_Configuration/Device_Configuration.html#irq-descriptor # [1]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213031
BugLink: http://bugs.launchpad.net/bugs/1909814
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Manuel Krause <manuelkrause@netscape.net>
Tested-by: Manuel Krause <manuelkrause@netscape.net>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
[ rjw: Subject rewrite, changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
