There is no harm in just always clearing the SME encryption bit, while
significantly simplifying the interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
The jazzdma ops implement support for a very basic IOMMU. Thus we really
should not use the dma-direct code that takes physical address limits
into account. This survived through the great MIPS DMA ops cleanup mostly
because I was lazy, but now it is time to fully split the implementations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When transferring DMA ownership back to the CPU there should never
be any writeback from the cache, as the buffer was owned by the
device until now. Instead it should just be invalidated for the
mapping directions where the device could have written data.
Note that the changes rely on the fact that kmap_atomic is stubbed
out for the !HIGHMEM case to simplify the code a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add a CONFIG_SET_FS option that is selected by architecturess that
implement set_fs, which is all of them initially. If the option is not
set stubs for routines related to overriding the address space are
provided so that architectures can start to opt out of providing set_fs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
CAVIUM_OCTEON_DCACHE_PREFETCH_WAR is a check for Octeon model CN6XXXX.
By using the version check we can remove the define.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
BCM1250_M3_WAR is depending on CONFIG_CONFIG_SB1_PASS_2_WORKAROUNDS.
So using this option directly lets and remove define.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
SB1250 uart bug is related to PASS 2 workarounds. Use config
CONFIG_SB1_PASS_2_WORKAROUNDS directly and get rid of SIBYTE_1956_WAR.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use a new config option to enable MIPS 34K ITLB workaround and remove
define from different war.h files.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use a new config option to enabel R1000_LLSC workaound and remove
define from different war.h files.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use a new config option to enable I-cache refill workaround and remove
define from different war.h files.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use a new config option to enable TX49XX I-cache index invalidate
workaround and remove define from different war.h files.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Neither MIPS4K_ICACHE_REFILL_WAR nor MIPS_CACHE_SYNC_WAR are implemented,
so removing defines for it won't change anything.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use a new config option to enable R4600 V2 cacheop hit workaround
and remove define from different war.h files.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use a new config option to enable R4600 V1 cacheop hit workaround
and remove define from the different war.h files.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use a new config option to enable R4600 V1 index I-cacheop workaround
and remove define from different war.h files.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cleanup a bit the Device Tree file:
1. Respect the number of cells in GPIO descriptors and keyboard matrix;
2. Use 'ecc-engine' instead of deprecated 'ingenic,bch-controller'
property;
3. The NAND's rb-gpios is actually active high;
3. The FRE/FWE pins must be configured in the proper mode for the NAND
to work if it was not already done by the bootloader.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
On RM400(a20r) machines ISA and SCSI interrupts share the same interrupt
line. Commit 49e6e07e3c ("MIPS: pass non-NULL dev_id on shared
request_irq()") accidently dropped the IRQF_SHARED bit, which breaks
registering SCSI interrupt. Put back IRQF_SHARED and add dev_id for
ISA interrupt.
Fixes: 49e6e07e3c ("MIPS: pass non-NULL dev_id on shared request_irq()")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In cc97ab235f ("MIPS: Simplify FP context initialization), init_fp_ctx
just initialize the fp/msa context, and own_fp_inatomic just restore
FCSR and 64bit FP regs from it, but miss MSACSR and upper MSA regs for
MSA, so MSACSR and MSA upper regs's value from previous task on current
cpu can leak into current task and cause unpredictable behavior when MSA
context not initialized.
Fixes: cc97ab235f ("MIPS: Simplify FP context initialization")
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 2a5984360b ("MIPS: Drop CPU_SUPPORTS_UNCACHED_ACCELERATED")
removed UCA config, but left the selection unused, delete it.
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The call simply looks up the corresponding task (without iterating
the tasklist), which is safe under rcu instead of the tasklist_lock.
In addition, the setaffinity counter part already does this.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add support for self-extracting kernels with a ZSTD compression.
Tested on a kernel for the GCW-Zero, it allows to reduce the size of the
kernel file from 4.1 MiB with gzip to 3.5 MiB with ZSTD, and boots just
as fast.
Compressed kernels are now also compiled with -D__DISABLE_EXPORTS in
order to disable the EXPORT_SYMBOL() macros inside of
lib/zstd/decompress.c.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Pull locking fixes from Thomas Gleixner:
"A set of fixes for lockdep, tracing and RCU:
- Prevent recursion by using raw_cpu_* operations
- Fixup the interrupt state in the cpu idle code to be consistent
- Push rcu_idle_enter/exit() invocations deeper into the idle path so
that the lock operations are inside the RCU watching sections
- Move trace_cpu_idle() into generic code so it's called before RCU
goes idle.
- Handle raw_local_irq* vs. local_irq* operations correctly
- Move the tracepoints out from under the lockdep recursion handling
which turned out to be fragile and inconsistent"
* tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep,trace: Expose tracepoints
lockdep: Only trace IRQ edges
mips: Implement arch_irqs_disabled()
arm64: Implement arch_irqs_disabled()
nds32: Implement arch_irqs_disabled()
locking/lockdep: Cleanup
x86/entry: Remove unused THUNKs
cpuidle: Move trace_cpu_idle() into generic code
cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic
sched,idle,rcu: Push rcu_idle deeper into the idle path
cpuidle: Fixup IRQ state
lockdep: Use raw_cpu_*() for per-cpu variables
SGI-IP27 is always cache coherent so we can use generic kmalloc.h and
remove the ip27 specific one.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Pull kvm fixes from Paolo Bonzini:
- PAE and PKU bugfixes for x86
- selftests fix for new binutils
- MMU notifier fix for arm64
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set
KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()
kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode
kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode
KVM: x86: fix access code passed to gva_to_gpa
selftests: kvm: Use a shorter encoding to clear RAX
We want neither
"
include/linux/compiler_attributes.h:201:41: warning: statement will never
be executed [-Wswitch-unreachable]
201 | # define fallthrough __attribute__((__fallthrough__))
| ^~~~~~~~~~~~~
"
nor
"
include/linux/compiler_attributes.h:201:41: warning: attribute
'fallthrough' not preceding a case label or default label
201 | # define fallthrough __attribute__((__fallthrough__))
| ^~~~~~~~~~~~~
"
It's not worth adding one more macro. Let's simply place the fallthrough
in between the expansions.
Fixes: c9b0299034 ("MIPS: Use fallthrough for arch/mips")
Cc: stable@vger.kernel.org
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The couple of #includes are unused by now; remove to prevent namespace
pollution.
This fixes e.g. build of dm_thin, which has a VIRTUAL symbol that
conflicted with the newly-introduced one in mach-loongson64/boot_param.h.
Fixes: 39c1485c8b ("MIPS: KVM: Add kvm guest support for Loongson-3")
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The 'flags' field of 'struct mmu_notifier_range' is used to indicate
whether invalidate_range_{start,end}() are permitted to block. In the
case of kvm_mmu_notifier_invalidate_range_start(), this field is not
forwarded on to the architecture-specific implementation of
kvm_unmap_hva_range() and therefore the backend cannot sensibly decide
whether or not to block.
Add an extra 'flags' parameter to kvm_unmap_hva_range() so that
architectures are aware as to whether or not they are permitted to block.
Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20200811102725.7121-2-will@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The initialization done by bmips_cpu_setup() typically affects both
threads of a given core, on 7435 which supports 2 cores and 2 threads,
logical CPU number 2 and 3 would not run this initialization.
Fixes: 738a3f7902 ("MIPS: BMIPS: Add early CPU initialization code")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When the BMIPS generic cpu-feature-overrides.h file was introduced,
cpu_has_inclusive_caches/MIPS_CPU_INCLUSIVE_CACHES was not set for
BMIPS5000 CPUs. Correct this when we have initialized the MIPS secondary
cache successfully.
Fixes: f337967d6d ("MIPS: BMIPS: Add cpu-feature-overrides.h")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
and turn the exception handlers into simply returning 0, which
simplifies the hell out of things in csum_partial.S
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
they are only called for iovec-backed iov_iter and under KERNEL_DS an
attempt to create such a beast will yield a kvec-backed one.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All callers of these primitives will
* discard anything we might've copied in case of error
* ignore the csum value in case of error
* always pass 0xffffffff as the initial sum, so the
resulting csum value (in case of success, that is) will never be 0.
That suggest the following calling conventions:
* don't pass err_ptr - just return 0 on error.
* don't bother with zeroing destination, etc. in case of error
* don't pass the initial sum - just use 0xffffffff.
This commit does the minimal conversion in the instances of csum_and_copy_...();
the changes of actual asm code behind them are done later in the series.
Note that this asm code is often shared with csum_partial_copy_nocheck();
the difference is that csum_partial_copy_nocheck() passes 0 for initial
sum while csum_and_copy_..._user() pass 0xffffffff. Fortunately, we are
free to pass 0xffffffff in all cases and subsequent patches will use that
freedom without any special comments.
A part that could be split off: parisc and uml/i386 claimed to have
csum_and_copy_to_user() instances of their own, but those were identical
to the generic one, so we simply drop them. Not sure if it's worth
a separate commit...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It's always 0. Note that we theoretically could use ~0U as well -
result will be the same modulo 0xffff, _if_ the damn thing did the
right thing for any value of initial sum; later we'll make use of
that when convenient.
However, unlike csum_and_copy_..._user(), there are instances that
did not work for arbitrary initial sums; c6x is one such.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
quite a few architectures have the same csum_partial_copy_nocheck() -
simply memcpy() the data and then return the csum of the copy.
hexagon, parisc, ia64, s390, um: explicitly spelled out that way.
arc, arm64, csky, h8300, m68k/nommu, microblaze, mips/GENERIC_CSUM, nds32,
nios2, openrisc, riscv, unicore32: end up picking the same thing spelled
out in lib/checksum.h (with varying amounts of perversions along the way).
everybody else (alpha, arm, c6x, m68k/mmu, mips/!GENERIC_CSUM, powerpc,
sh, sparc, x86, xtensa) have non-generic variants. For all except c6x
the declaration is in their asm/checksum.h. c6x uses the wrapper
from asm-generic/checksum.h that would normally lead to the lib/checksum.h
instance, but in case of c6x we end up using an asm function from arch/c6x
instead.
Screw that mess - have architectures with private instances define
_HAVE_ARCH_CSUM_AND_COPY in their asm/checksum.h and have the default
one right in net/checksum.h conditional on _HAVE_ARCH_CSUM_AND_COPY
*not* defined.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
