The num-viewport property is never used and can be dropped, whereas the
"iommus" property is not needed since we use "iommu-map-mask" and
"iommu-map" already.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The HSP instances on Tegra194 are not fully compatible with the version
found on Tegra186, so drop the fallback compatible string from the list.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra194 pinmux DT bindings do not define the nvidia,lpdr property,
so drop them from the device trees that have listed them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The standard "jedec," vendor prefix should be used for SPI NOR flash
chips. This allows the right DT schema to be picked for validation.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra186 CCPLEX cluster register region is 4 MiB is length, not 4
MiB - 1. This was likely presumed to be the "limit" rather than length.
Fix it up.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The I2C controller found on Tegra186 is not fully compatible with the
Tegra210 version, so drop the fallback compatible string from the list.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Child nodes of the TI INA3221 power monitor device tree node should be
called input@* according to the DT schema.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The DT schema requires that nodes representing thermal zones include a
"-thermal" suffix in their name.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Make the order of the clocks and clock-names properties match the order
in the device tree bindings. This isn't strictly necessary from a point
of view of the operating system because matching will be done based on
the clock-names, but it makes it easier to validate the device trees
against the DT schema.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The CML1 and PLL_E clocks are never explicitly used by the AHCI
controller found on Tegra132, so drop them from the corresponding device
tree node.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The I2C controller found on Tegra124 is not fully compatible with the
Tegra114 version, so drop the fallback compatible string from the list.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add peripheral OPP tables on Tegra132 and wire them up to ACTMON and the
EMC. While at it, add the missing "#interconnect-cells" properties to
the memory controller and external memory controller nodes. Also set the
"#reset-cells" property for the memory controller because it exports the
hotflush reset controls.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The TKE (time-keeping engine) found on Tegra132 is not backwards
compatible with the version found on Tegra20, so update the compatible
string list accordingly.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra PMC device tree bindings don't support the "#wake-cells" and
"nvidia,reset-gpio" properties, so remove them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The AS3722 pinmux device tree node doesn't have a "reg" property and
therefore must not have a unit-address, so drop it.
While at it, add missing unit-addresses for the charger and smart
battery IC's on the ChromeOS embedded controller's I2C tunnel bus.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The native timers IP block found on NVIDIA Tegra SoCs implements a
watchdog timer that can be used to recover from system hangs. Add the
device tree node on Tegra186.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Regulators defined at the top level in device tree are no longer part of
a simple bus and therefore don't have a reg property. Nodes without a
reg property shouldn't have a unit-address either, so drop the unit
address from the node names. To ensure nodes aren't duplicated (in which
case they would end up merged in the final DTB), append the name of the
regulator to the node name.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Clocks defined at the top level in device tree are no longer part of a
simple bus and therefore don't have a reg property. Nodes without a reg
property shouldn't have a unit-address either, so drop the unit address
from the node names. To ensure nodes aren't duplicated (in which case
they would end up merged in the final DTB), append the name of the clock
to the node name.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The display controllers are attached to a separate ARM SMMU instance
that is dedicated to servicing isochronous memory clients. Add this ISO
instance of the ARM SMMU to device tree.
Please note that the display controllers are not hooked up to this SMMU
yet, because we are still missing a means to transition framebuffers
used by the bootloader to the kernel.
This based upon an initial patch by Thierry Reding <treding@nvidia.com>.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Populate the device-tree nodes for NVENC and NVJPG Host1x engines on
Tegra186 and Tegra194.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add support to enumerate SD in UHS mode on Tegra194. Add required
device-tree properties in SDMMC1 and SDMMC3 instances to enable dynamic
pad voltage switching and enumerate SD card in UHS-I modes.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Jetson AGX Orin Developer Kit is a continuation of the Jetson
Developer Kit line using the new NVIDIA Tegra234 (Orin) SoC.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The NVIDIA Tegra234 SoC has 3 clusters of 4 Cortex-A78AE CPU cores each,
for a total of 12 CPUs. Each CPU has 64 KiB instruction and data caches
with each cluster having an additional 256 KiB unified L2 cache and a 2
MiB L3 cache.
Signed-off-by: Thierry Reding <treding@nvidia.com>
These two controllers expose general purpose I/O pins that can be used
to control or monitor a variety of signals.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a device for TCU (Tegra Combined UART) used for serial console.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add missing properties to the eMMC controller, as required to use it on
actual hardware.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
On final Tegra234 systems, shared memory for communication with BPMP is
located at offset 0x70000 in SYSRAM.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The json-schema bindings for SRAM expect the nodes to be called "sram"
rather than "sysram" or "shmem". Furthermore, place the brackets around
the SYSRAM references such that a two-element array is created rather
than a two-element array nested in a single-element array. This is not
relevant for device tree itself, but allows the nodes to be properly
validated against json-schema bindings.
Signed-off-by: Thierry Reding <treding@nvidia.com>
SoCFPGA dts updates for v5.17
- Update N5X to include qspi, usb and ethernet
- Adjust NAND partition size for Agilex and Stratix10
* tag 'socfpga_dts_update_for_v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: Update NAND MTD partition for Agilex and Stratix 10
arm64: dts: n5x: add qspi, usb, and ethernet support
Link: https://lore.kernel.org/r/20211215164545.300273-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* kvm-arm64/pkvm-hyp-sharing:
: .
: Series from Quentin Perret, implementing HYP page share/unshare:
:
: This series implements an unshare hypercall at EL2 in nVHE
: protected mode, and makes use of it to unmmap guest-specific
: data-structures from EL2 stage-1 during guest tear-down.
: Crucially, the implementation of the share and unshare
: routines use page refcounts in the host kernel to avoid
: accidentally unmapping data-structures that overlap a common
: page.
: [...]
: .
KVM: arm64: pkvm: Unshare guest structs during teardown
KVM: arm64: Expose unshare hypercall to the host
KVM: arm64: Implement do_unshare() helper for unsharing memory
KVM: arm64: Implement __pkvm_host_share_hyp() using do_share()
KVM: arm64: Implement do_share() helper for sharing memory
KVM: arm64: Introduce wrappers for host and hyp spin lock accessors
KVM: arm64: Extend pkvm_page_state enumeration to handle absent pages
KVM: arm64: pkvm: Refcount the pages shared with EL2
KVM: arm64: Introduce kvm_share_hyp()
KVM: arm64: Implement kvm_pgtable_hyp_unmap() at EL2
KVM: arm64: Hook up ->page_count() for hypervisor stage-1 page-table
KVM: arm64: Fixup hyp stage-1 refcount
KVM: arm64: Refcount hyp stage-1 pgtable pages
KVM: arm64: Provide {get,put}_page() stubs for early hyp allocator
Signed-off-by: Marc Zyngier <maz@kernel.org>
Introduce an unshare hypercall which can be used to unmap memory from
the hypervisor stage-1 in nVHE protected mode. This will be useful to
update the EL2 ownership state of pages during guest teardown, and
avoids keeping dangling mappings to unreferenced portions of memory.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-14-qperret@google.com
Tearing down a previously shared memory region results in the borrower
losing access to the underlying pages and returning them to the "owned"
state in the owner.
Implement a do_unshare() helper, along the same lines as do_share(), to
provide this functionality for the host-to-hyp case.
Reviewed-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-13-qperret@google.com
__pkvm_host_share_hyp() shares memory between the host and the
hypervisor so implement it as an invocation of the new do_share()
mechanism.
Note that double-sharing is no longer permitted (as this allows us to
reduce the number of page-table walks significantly), but is thankfully
no longer relied upon by the host.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-12-qperret@google.com
By default, protected KVM isolates memory pages so that they are
accessible only to their owner: be it the host kernel, the hypervisor
at EL2 or (in future) the guest. Establishing shared-memory regions
between these components therefore involves a transition for each page
so that the owner can share memory with a borrower under a certain set
of permissions.
Introduce a do_share() helper for safely sharing a memory region between
two components. Currently, only host-to-hyp sharing is implemented, but
the code is easily extended to handle other combinations and the
permission checks for each component are reusable.
Reviewed-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-11-qperret@google.com
In preparation for adding additional locked sections for manipulating
page-tables at EL2, introduce some simple wrappers around the host and
hypervisor locks so that it's a bit easier to read and bit more difficult
to take the wrong lock (or even take them in the wrong order).
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-10-qperret@google.com
Explicitly name the combination of SW0 | SW1 as reserved in the pte and
introduce a new PKVM_NOPAGE meta-state which, although not directly
stored in the software bits of the pte, can be used to represent an
entry for which there is no underlying page. This is distinct from an
invalid pte, as stage-2 identity mappings for the host are created
lazily and so an invalid pte there is the same as a valid mapping for
the purposes of ownership information.
This state will be used for permission checking during page transitions
in later patches.
Reviewed-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-9-qperret@google.com
In order to simplify the page tracking infrastructure at EL2 in nVHE
protected mode, move the responsibility of refcounting pages that are
shared multiple times on the host. In order to do so, let's create a
red-black tree tracking all the PFNs that have been shared, along with
a refcount.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-8-qperret@google.com
The create_hyp_mappings() function can currently be called at any point
in time. However, its behaviour in protected mode changes widely
depending on when it is being called. Prior to KVM init, it is used to
create the temporary page-table used to bring-up the hypervisor, and
later on it is transparently turned into a 'share' hypercall when the
kernel has lost control over the hypervisor stage-1. In order to prepare
the ground for also unsharing pages with the hypervisor during guest
teardown, introduce a kvm_share_hyp() function to make it clear in which
places a share hypercall should be expected, as we will soon need a
matching unshare hypercall in all those places.
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-7-qperret@google.com
In nVHE protected mode, the EL2 code uses a temporary allocator during
boot while re-creating its stage-1 page-table. Unfortunately, the
hyp_vmmemap is not ready to use at this stage, so refcounting pages
is not possible. That is not currently a problem because hyp stage-1
mappings are never removed, which implies refcounting of page-table
pages is unnecessary.
In preparation for allowing hypervisor stage-1 mappings to be removed,
provide stub implementations for {get,put}_page() in the early allocator.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-2-qperret@google.com
* kvm-arm64/vgic-fixes-5.17:
: .
: A few vgic fixes:
: - Harden vgic-v3 error handling paths against signed vs unsigned
: comparison that will happen once the xarray-based vcpus are in
: - Demote userspace-triggered console output to kvm_debug()
: .
KVM: arm64: vgic: Demote userspace-triggered console prints to kvm_debug()
KVM: arm64: vgic-v3: Fix vcpu index comparison
Signed-off-by: Marc Zyngier <maz@kernel.org>
