The LPC controller has no concept of the BMC and the Host partitions.
A concrete instance is that the HICRB[5:4] are for the I/O port address
configurtaion of KCS channel 1/2. However, the KCS driver cannot access
HICRB for channel 1/2 initialization via syscon regmap interface due to
the parition boundary. (i.e. offset 80h)
In addition, for the HW design backward compatibility, a newly added HW
control bit could be located at any reserved one over the LPC addressing
space. Thereby, this patch removes the lpc-bmc and lpc-host child node
and thus the LPC partitioning.
Note that this change requires the synchronization between device tree
change and the driver change. To prevent the misuse of old devicetrees
with new drivers, or vice versa, the v2 compatible strings are adopted
for the LPC device as listed:
"aspeed,ast2400-lpc-v2"
"aspeed,ast2500-lpc-v2"
"aspeed,ast2600-lpc-v2"
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210319062752.145730-2-andrew@aj.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
mvebu dt for 5.13 (part 1)
Add support for ATL-x530 Board (Armada 38x based)
* tag 'mvebu-dt-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: mvebu: Add device tree for ATL-x530 Board
Link: https://lore.kernel.org/r/87v98xbzir.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes for omaps for v5.12-rc cycle
Fix swapped mmc device order also for omap3 that got changed with the
recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the aliases
should be board specific, all the mmc device instances are all there in
the SoC, and we do probe them by default so that PM runtime can idle the
devices if left enabled from the bootloader.
Also included are two compiler warning fixes.
* tag 'omap-for-v5.12/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Fix uninitialized sr_inst
ARM: dts: Fix swapped mmc order for omap3
ARM: OMAP2+: Fix warning for omap_init_time_of()
ARM: OMAP4: PM: update ROM return address for OSWR and OFF
ARM: OMAP4: Fix PMIC voltage domains for bionic
ARM: dts: Fix moving mmc devices with aliases for omap4 & 5
ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race
Link: https://lore.kernel.org/r/pull-1617702755-711306@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There is a timer wrap issue on dra7 for the ARM architected timer.
In a typical clock configuration the timer fails to wrap after 388 days.
To work around the issue, we need to use timer-ti-dm percpu timers instead.
Let's configure dmtimer3 and 4 as percpu timers by default, and warn about
the issue if the dtb is not configured properly.
Let's do this as a single patch so it can be backported to v5.8 and later
kernels easily. Note that this patch depends on earlier timer-ti-dm
systimer posted mode fixes, and a preparatory clockevent patch
"clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue".
For more information, please see the errata for "AM572x Sitara Processors
Silicon Revisions 1.1, 2.0":
https://www.ti.com/lit/er/sprz429m/sprz429m.pdf
The concept is based on earlier reference patches done by Tero Kristo and
Keerthy.
Cc: Keerthy <j-keerthy@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210323074326.28302-3-tony@atomide.com
This is a relatively low-cost AST2500-based Xeon E-2100/E-2200 series
mini-ITX board that we hope can provide a decent platform for OpenBMC
development.
This initial device-tree provides the necessary configuration for
basic BMC functionality such as host power control, serial console and
KVM support, and POST code snooping.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210401044232.9637-1-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
AT91 dt for 5.13:
- two little fixes (typo, W=1)
- a change in gpio button keycode for recent boards
* tag 'at91-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama5d2: add ETB and ETM unit name
ARM: dts: at91: change the key code of the gpio key
ARM: dts: at91: Fix a typo
Link: https://lore.kernel.org/r/20210407114415.13180-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM changes for v5.13
1. Configure battery charger and front camera on GT-I9100 phone.
2. Fix in several boards the Maxim PMIC/MUIC/fuel gauge interrupt flags
to match real type of interrupt coming from the device.
3. Correct DTS with dtschema. This brings back the commit adding input
clock to CMU in Exynos4412 Odroid which was reverted some time ago
due to unsupported deferred probes (now supported and tested).
* tag 'samsung-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Add front camera support to I9100
ARM: dts: exynos: white-space cleanups
ARM: dts: exynos: replace deprecated NTC/Murata compatibles
ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid
ARM: dts: s5pv210: correct fuel gauge interrupt trigger level on Fascinate family
ARM: dts: exynos: correct PMIC interrupt trigger level on Snow
ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250
ARM: dts: exynos: correct PMIC interrupt trigger level on P4 Note family
ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid X/U3 family
ARM: dts: exynos: correct PMIC interrupt trigger level on Midas family
ARM: dts: exynos: correct MUIC interrupt trigger level on Midas family
ARM: dts: exynos: correct fuel gauge interrupt trigger level on Midas family
ARM: dts: exynos: correct fuel gauge interrupt trigger level on P4 Note family
ARM: dts: exynos: correct fuel gauge interrupt trigger level on GT-I9100
ARM: dts: exynos: add charger supply for I9100
Link: https://lore.kernel.org/r/20210407065828.7213-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Devicetree changes for omaps for v5.13
Mostly configures addtional devices for various boards, and
updates the gpio line names for beagle boards so userspace can
optionally find the right lines:
- Use unique gpio line names for am335x-pocketbeagle
- Update omap3-echo led configuration and add ath6kl node
- Fix indentation for am3 tscadc node
- Prepare motorola-cpcap-mapphone for power supply dtbs_check_parsing
- Use unique gpio line names for am335x-boneblack.dts
* tag 'omap-for-v5.13/dt-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-boneblack.dts: unique gpio-line-names
ARM: dts: motorola-cpcap-mapphone: Prepare for dtbs_check parsing
ARM: dts: am33xx-l4: fix tscadc@0 node indentation
ARM: dts: omap3-echo: Add ath6kl node
ARM: dts: omap3-echo: Update LED configuration
ARM: dts: am335x-pocketbeagle: unique gpio-line-names
Link: https://lore.kernel.org/r/pull-1617703816-65652@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Missing "chosen" node can cause issues when booting a kernel
with a boot-loader that doesn't create a chosen node if this
isn't present in the DTB since the decompressor relies on a
pre-existing chosen node to be available to insert the command
line and merge other ATAGS info.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Link: https://lore.kernel.org/r/20210405051658.26779-5-shc_work@mail.ru'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Our usual bunch of patches to support the Allwinner SoCs, this time
adding:
- New secondary interrupt controller binding to support the wake-up
- Use the RSB bus instead of I2C for the PMIC on the H6
- HDMI support for the BananaPi M2-Zero
- New board: Topwise A721
* tag 'sunxi-dt-for-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: h3: beelink-x2: Add power button
arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection
ARM: dts: sunxi: h2-plus-bananapi-m2-zero: Add HDMI out
ARM: dts: sun4i: Add support for Topwise A721 tablet
dt-bindings: arm: Add Topwise A721
arm64: dts: allwinner: Move wakeup-capable IRQs to r_intc
arm64: dts: allwinner: Use the new r_intc binding
ARM: dts: sunxi: Move wakeup-capable IRQs to r_intc
ARM: dts: sunxi: h3/h5: Add r_intc node
ARM: dts: sunxi: Use the new r_intc binding
Link: https://lore.kernel.org/r/8a3e3271-bebe-4d27-a9e7-7b7a6311a38d.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas ARM DT updates for v5.13 (take two)
- Video IN (VIN) and Camera (CSI-2) support for the R-Car M3-W+ SoC,
- LED support for the Falcon development board,
- Preparatory display pipeline support for the R-Car V3U SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.13-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: ulcb: Add cpu-supply property to a57_0 node
arm64: dts: renesas: salvator-common: Add cpu-supply property to a57_0 node
arm64: dts: renesas: r8a77950: Drop operating points above 1.5 GHz
arm64: dts: renesas: r8a779a0: Fix PMU interrupt
arm64: dts: renesas: r8a779a0: Add VSPD support
arm64: dts: renesas: r8a779a0: Add FCPVD support
arm64: dts: renesas: falcon-cpu: Add GP LEDs
arm64: dts: renesas: r8a77961: Add VIN and CSI-2 device nodes
ARM: dts: koelsch: Configure pull-up for SOFT_SW GPIO keys
arm64: dts: renesas: falcon: Move AVB0 to main DTS
arm64: dts: renesas: falcon: Move watchdog config to CPU board DTS
arm64: dts: renesas: falcon: Move console config to CPU board DTS
Link: https://lore.kernel.org/r/cover.1617359678.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add unit address to the ETB and ETM nodes.
It also allow us to get rid of the warnings:
../arch/arm/boot/dts/sama5d2.dtsi:43.6-57.4: Warning
(unit_address_vs_reg): /etb: node has a reg or ranges property, but no
unit name
../arch/arm/boot/dts/sama5d2.dtsi:59.6-73.4: Warning
(unit_address_vs_reg): /etm: node has a reg or ranges property, but no
unit name
when we compile with W=1.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210402170139.140595-1-nicolas.ferre@microchip.com
mvebu fixes for 5.12 (part 1)
2 fixes on on turris-omnia (Armada 38x based:)
- Fix storm interrupt
- Enable hardware buffer management as it should be
Unbreak AHCI on all Marvell Armada 7k8k / CN913x platforms
* tag 'mvebu-fixes-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pin
ARM: dts: turris-omnia: fix hardware buffer management
Revert "arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts"
Link: https://lore.kernel.org/r/87a6qgctit.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
