ti,omap2-uart was kept around to work with legacy omap-serial driver.
Now that we have completed move to 8250-omap.c drop legacy compatible.
This will simplify writing YAML schema.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ti,omap4-uart was kept around to work with legacy omap-serial driver.
Now that we have completed move to 8250-omap.c drop legacy compatible.
This will simplify writing YAML schema.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
According to Documentation/devicetree/bindings/arm/cpus.yaml, the
"enable-method" property should be a property of the individual CPU
nodes, and not of the parent "cpus" container node.
However, on R-Car Gen2 and RZ/G1 SoCs, the property is tied to the
"cpus" node instead.
Secondary CPU bringup and CPU hot (un)plug work regardless, as
arm_dt_init_cpu_maps() falls back to looking in the "cpus" node.
The cpuidle code does not have such a fallback, so it does not detect
the enable-method. Note that cpuidle does not support the
"renesas,apmu" enable-method yet, so for now this does not make any
difference.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/35fcfedf9de9269185c48ca5a6dfcba7cdd3484b.1621427319.git.geert+renesas@glider.be
This fixes up the axis on the Janice accelerometer to give
the right orientation according to tests.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
According to Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml, the
correct name of the property is 'fsl,tuning-step'.
Fix it accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Fixes: f13f571ac8 ("ARM: dts: imx7d-pico: Extend peripherals support")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml, the
correct name of the property is 'fsl,tuning-step'.
Fix it accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Fixes: ae7b3384b6 ("ARM: dts: Add support for 96Boards Meerkat96 board")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
make dtbs_check:
lan9220@f4000000: $nodename:0: 'lan9220@f4000000' does not match '^ethernet(@.*)?$'
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
make dtbs_check:
lan9221@5,0: $nodename:0: 'lan9221@5,0' does not match '^ethernet(@.*)?$'
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Without SoC specific PHY fixups the network interface on this board will
fail to work. Provide missing DT properties to make it work again.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Latest kernel is actually using phy-mode property, so set proper value to make
fec interface work again.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Until commit fa2d0aa969 ("mmc: core: Allow setting slot index via
device tree alias") was introduced, our usdhc3 and usdhc4 devices
were enumerated as mmc0 and mmc1. The mmc1 device is used to boot/update
the board and its name must be fixed.
With the referenced commit, aliases from imx6qdl.dtsi took effect.
Override the aliases to get back the original device indexes.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is issue with simple sound card, the simple sound
card can't configure the pll of codec.
[ 115.352669] wm8960 1-001a: failed to configure clock
[ 115.358843] wm8960 1-001a: ASoC: error at snd_soc_dai_hw_params on wm8960-hifi: -22
So Switch to fsl-asoc-card and the fsl-asoc-card can support
asrc module as front-end component.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This patch adds DTS definition of the imx278 based XEA board.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The address and reg adds no value to the port node, remove them.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This fixes dtcheck warning:
arch/arm/boot/dts/gemini-dlink-dns-313.dt.yaml: gpio-i2c: $nodename:0: 'gpio-i2c' does not match '^i2c(@.*)?'
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
All of IXP4xx SoCs has an EthA at 0xc800c000 so move this
from the IXP[56]x to the IXP4xx DTSI.
Then add the second ethernet port on the Cambria GW2358-4
on EthA.
Reported-by: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Having a single phandle reference for rtc0, mmc0 and am335x_pinmux makes
the DTS well-ordered and therefore more readable.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Tony Lindgren <tony@atomide.com>
DRA76 EVM boards are not shipped with OV5640 sensor module, it is a
separate purchase. OV5640 module is also just one of the possible
sensors or capture boards you can connect.
However, for some reason, OV5640 has been added to the board dts file,
making it cumbersome to use other sensors.
Remove the OV5640 from the dts file so that it is easy to use other
sensors via DT overlays.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
