The force-quiesce-state loop function rcu_gp_fqs_loop() checks for
callback overloading and does an immediate initial scan for idle CPUs
if so. However, subsequent rescans will be carried out at as leisurely a
rate as they always are, as specified by the rcutree.jiffies_till_next_fqs
module parameter. It might be tempting to just continue immediately
rescanning, but this turns the RCU grace-period kthread into a CPU hog.
It might also be tempting to reduce the time between rescans to a single
jiffy, but this can be problematic on larger systems.
This commit therefore divides the normal time between rescans by three,
rounding up. Thus a small system running at HZ=1000 that is suffering
from callback overload will wait only one jiffy instead of the normal
three between rescans.
[ paulmck: Apply Neeraj Upadhyay feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Syscall-side map_lookup_elem() and map_update_elem() used to use
kmalloc() to allocate temporary buffers of value_size, so
KMALLOC_MAX_SIZE limit on value_size made sense to prevent creation of
array map that won't be accessible through syscall interface.
But this limitation since has been lifted by relying on kvmalloc() in
syscall handling code. So remove KMALLOC_MAX_SIZE, which among other
things means that it's possible to have BPF global variable sections
(.bss, .data, .rodata) bigger than 8MB now. Keep the sanity check to
prevent trivial overflows like round_up(map->value_size, 8) and restrict
value size to <= INT_MAX (2GB).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220715053146.1291891-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_MAP_TYPE_ARRAY is rounding value_size to closest multiple of 8 and
stores that as array->elem_size for various memory allocations and
accesses.
But the code tends to re-calculate round_up(map->value_size, 8) in
multiple places instead of using array->elem_size. Cleaning this up and
making sure we always use array->size to avoid duplication of this
(admittedly simple) logic for consistency.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220715053146.1291891-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If BPF array map is bigger than 4GB, element pointer calculation can
overflow because both index and elem_size are u32. Fix this everywhere
by forcing 64-bit multiplication. Extract this formula into separate
small helper and use it consistently in various places.
Speculative-preventing formula utilizing index_mask trick is left as is,
but explicit u64 casts are added in both places.
Fixes: c85d69135a ("bpf: move memory size checks to bpf_map_charge_init()")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220715053146.1291891-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
NOMAP irq domains use the revmap_size field to indicate the maximum
hwirq number the domain accepts. This is a bit confusing as
revmap_size is usually used to indicate the size of the revmap array,
which a NOMAP domain doesn't have.
Instead, use the hwirq_max field which has the correct semantics, and
keep revmap_size to 0 for a NOMAP domain.
Signed-off-by: Xu Qiang <xuqiang36@huawei.com>
[maz: commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220719063641.56541-3-xuqiang36@huawei.com
When using a NOMAP domain, __irq_resolve_mapping() doesn't store
the Linux IRQ number at the address optionally provided by the caller.
While this isn't a huge deal (the returned value is guaranteed
to the hwirq that was passed as a parameter), let's honour the letter
of the API by writing the expected value.
Fixes: d22558dd0a (“irqdomain: Introduce irq_resolve_mapping()”)
Signed-off-by: Xu Qiang <xuqiang36@huawei.com>
[maz: commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220719063641.56541-2-xuqiang36@huawei.com
Streaming DMA mapping involving an IOMMU may be much slower for larger
total mapping size. This is because every IOMMU DMA mapping requires an
IOVA to be allocated and freed. IOVA sizes above a certain limit are not
cached, which can have a big impact on DMA mapping performance.
Provide an API for device drivers to know this "optimal" limit, such that
they may try to produce mapping which don't exceed it.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The rng's random_init() function contributes the real time to the rng at
boot time, so that events can at least start in relation to something
particular in the real world. But this clock might not yet be set that
point in boot, so nothing is contributed. In addition, the relation
between minor clock changes from, say, NTP, and the cycle counter is
potentially useful entropic data.
This commit addresses this by mixing in a time stamp on calls to
settimeofday and adjtimex. No entropy is credited in doing so, so it
doesn't make initialization faster, but it is still useful input to
have.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Free slots tracking assumes that slots in a segment can be allocated to
fulfill a request. This implies that slots in a segment should belong to
the same area. Although the possibility of a violation is low, it is better
to explicitly enforce segments won't span multiple areas by adjusting the
number of slabs when configuring areas.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
default_nslabs are rounded up in two cases with exactly same comments.
Add a simple wrapper to reduce duplicate code/comments. It is preparatory
to adding more logics into the round-up.
No functional change intended.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Commit 20347fca71 ("swiotlb: split up the global swiotlb lock") splits
io_tlb_mem into multiple areas. Each area has its own lock and index. The
global ones are not used so remove them.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Don't dereference "mem" after it has been freed. Flip the
two kfree()s around to address this bug.
Fixes: 26ffb91fa5e0 ("swiotlb: split up the global swiotlb lock")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The total memory size we get in kernel is usually slightly less than the
actual memory size because BIOS/firmware will reserve some memory region.
So it won't export all memory as usable.
E.g, on my x86_64 kvm guest with 1G memory, the total_mem value shows:
UEFI boot with ovmf: 0x3faef000 Legacy boot kvm guest: 0x3ff7ec00
When specifying crashkernel=1G-2G:128M, if we have a 1G memory machine, we
get total size 1023M from firmware. Then it will not fall into 1G-2G,
thus no memory reserved. User will never know this, it is hard to let
user know the exact total value in kernel.
One way is to use dmi/smbios to get physical memory size, but it's not
reliable as well. According to Prarit hardware vendors sometimes screw
this up. Thus round up total size to 128M to work around this problem.
This patch is a resend of [1] and rebased onto v5.19-rc2, and the
original credit goes to Dave Young.
[1]: http://lists.infradead.org/pipermail/kexec/2018-April/020568.html
Link: https://lkml.kernel.org/r/20220627074440.187222-1-ltao@redhat.com
Signed-off-by: Tao Liu <ltao@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The internal kallsyms tables contain information which could be quite
useful to a debugging tool in the absence of other debuginfo. If kallsyms
is enabled, then a debugging tool could parse it and use it as a fallback
symbol table. Combined with BTF data, live & post-mortem debuggers can
support basic operations without needing a large DWARF debuginfo file
available. As many as five symbols are necessary to properly parse
kallsyms names and addresses. Add these to the vmcoreinfo note.
CONFIG_KALLSYMS_ABSOLUTE_PERCPU does impact the computation of symbol
addresses. However, a debugger can infer this configuration value by
comparing the address of _stext in the vmcoreinfo with the address
computed via kallsyms. So there's no need to include information about
this config value in the vmcoreinfo note.
To verify that we're still well below the maximum of 4096 bytes, I created
a script[1] to compute a rough upper bound on the possible size of
vmcoreinfo. On v5.18-rc7, the script reports 3106 bytes, and with this
patch, the maximum become 3370 bytes.
[1]: https://github.com/brenns10/kernel_stuff/blob/master/vmcoreinfosize/
Link: https://lkml.kernel.org/r/20220517000508.777145-3-stephen.s.brennan@oracle.com
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Bixuan Cui <cuibixuan@huawei.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Vernet <void@manifault.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Expose kallsyms data in vmcoreinfo note".
The kernel can be configured to contain a lot of introspection or
debugging information built-in, such as ORC for unwinding stack traces,
BTF for type information, and of course kallsyms. Debuggers could use
this information to navigate a core dump or live system, but they need to
be able to find it.
This patch series adds the necessary symbols into vmcoreinfo, which would
allow a debugger to find and interpret the kallsyms table. Using the
kallsyms data, the debugger can then lookup any symbol, allowing it to
find ORC, BTF, or any other useful data.
This would allow a live kernel, or core dump, to be debugged without any
DWARF debuginfo. This is useful for many cases: the debuginfo may not
have been generated, or you may not want to deploy the large files
everywhere you need them.
I've demonstrated a proof of concept for this at LSF/MM+BPF during a
lighting talk. Using a work-in-progress branch of the drgn debugger, and
an extended set of BTF generated by a patched version of dwarves, I've
been able to open a core dump without any DWARF info and do basic tasks
such as enumerating slab caches, block devices, tasks, and doing
backtraces. I hope this series can be a first step toward a new
possibility of "DWARFless debugging".
Related discussion around the BTF side of this:
https://lore.kernel.org/bpf/586a6288-704a-f7a7-b256-e18a675927df@oracle.com/T/#u
Some work-in-progress branches using this feature:
https://github.com/brenns10/dwarves/tree/remove_percpu_restriction_1https://github.com/brenns10/drgn/tree/kallsyms_plus_btf
This patch (of 2):
To include kallsyms data in the vmcoreinfo note, we must make the symbol
declarations visible outside of kallsyms.c. Move these to a new internal
header file.
Link: https://lkml.kernel.org/r/20220517000508.777145-1-stephen.s.brennan@oracle.com
Link: https://lkml.kernel.org/r/20220517000508.777145-2-stephen.s.brennan@oracle.com
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Bixuan Cui <cuibixuan@huawei.com>
Cc: David Vernet <void@manifault.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull perf fix from Borislav Petkov:
- A single data race fix on the perf event cleanup path to avoid
endless loops due to insufficient locking
* tag 'perf_urgent_for_v5.19_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix data race between perf_event_set_output() and perf_mmap_close()
Pull printk fix from Petr Mladek:
- Make pr_flush() fast when consoles are suspended.
* tag 'printk-for-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: do not wait for consoles when suspended
Now that all callers of ->llseek are going through vfs_llseek(), we
don't gain anything by keeping no_llseek around. Nothing actually calls
it and setting ->llseek to no_lseek is completely equivalent to
leaving it NULL.
Longer term (== by the end of merge window) we want to remove all such
intializations. To simplify the merge window this commit does *not*
touch initializers - it only defines no_llseek as NULL (and simplifies
the tests on file opening).
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Give the LSM framework the ability to filter setgroups() syscalls. There
are already analagous hooks for the set*uid() and set*gid() syscalls.
The SafeSetID LSM will use this new hook to ensure setgroups() calls are
allowed by the installed security policy. Tested by putting print
statement in security_task_fix_setgroups() hook and confirming that it
gets hit when userspace does a setgroups() syscall.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
The milli-Watts precision causes rounding errors while calculating
efficiency cost for each OPP. This is especially visible in the 'simple'
Energy Model (EM), where the power for each OPP is provided from OPP
framework. This can cause some OPPs to be marked inefficient, while
using micro-Watts precision that might not happen.
Update all EM users which access 'power' field and assume the value is
in milli-Watts.
Solve also an issue with potential overflow in calculation of energy
estimation on 32bit machine. It's needed now since the power value
(thus the 'cost' as well) are higher.
Example calculation which shows the rounding error and impact:
power = 'dyn-power-coeff' * volt_mV * volt_mV * freq_MHz
power_a_uW = (100 * 600mW * 600mW * 500MHz) / 10^6 = 18000
power_a_mW = (100 * 600mW * 600mW * 500MHz) / 10^9 = 18
power_b_uW = (100 * 605mW * 605mW * 600MHz) / 10^6 = 21961
power_b_mW = (100 * 605mW * 605mW * 600MHz) / 10^9 = 21
max_freq = 2000MHz
cost_a_mW = 18 * 2000MHz/500MHz = 72
cost_a_uW = 18000 * 2000MHz/500MHz = 72000
cost_b_mW = 21 * 2000MHz/600MHz = 70 // <- artificially better
cost_b_uW = 21961 * 2000MHz/600MHz = 73203
The 'cost_b_mW' (which is based on old milli-Watts) is misleadingly
better that the 'cost_b_uW' (this patch uses micro-Watts) and such
would have impact on the 'inefficient OPPs' information in the Cpufreq
framework. This patch set removes the rounding issue.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When checking with sparse, btf_show_type_value() is causing a
warning about checking integer vs NULL when the macro is passed
a pointer, due to the 'value != 0' check. Stop sparse complaining
about any type-casting by adding a cast to the typeof(value).
This fixes the following sparse warnings:
kernel/bpf/btf.c:2579:17: warning: Using plain integer as NULL pointer
kernel/bpf/btf.c:2581:17: warning: Using plain integer as NULL pointer
kernel/bpf/btf.c:3407:17: warning: Using plain integer as NULL pointer
kernel/bpf/btf.c:3758:9: warning: Using plain integer as NULL pointer
Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220714100322.260467-1-ben.dooks@sifive.com
Pyll sysctl fix from Luis Chamberlain:
"Only one fix for sysctl"
* tag 'sysctl-fixes-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
mm: sysctl: fix missing numa_stat when !CONFIG_HUGETLB_PAGE
commit 278311e417 ("kexec, KEYS: Make use of platform keyring for
signature verify") adds platform keyring support on x86 kexec but not
arm64.
The code in bzImage64_verify_sig uses the keys on the
.builtin_trusted_keys, .machine, if configured and enabled,
.secondary_trusted_keys, also if configured, and .platform keyrings
to verify the signed kernel image as PE file.
Cc: kexec@lists.infradead.org
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Reviewed-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Before commit 105e10e2cf1c ("kexec_file: drop weak attribute from
functions"), there was already no arch-specific implementation
of arch_kexec_kernel_verify_sig. With weak attribute dropped by that
commit, arch_kexec_kernel_verify_sig is completely useless. So clean it
up.
Note later patches are dependent on this patch so it should be backported
to the stable tree as well.
Cc: stable@vger.kernel.org
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Reviewed-by: Michal Suchanek <msuchanek@suse.de>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
[zohar@linux.ibm.com: reworded patch description "Note"]
Link: https://lore.kernel.org/linux-integrity/20220714134027.394370-1-coxu@redhat.com/
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
As requested
(http://lkml.kernel.org/r/87ee0q7b92.fsf@email.froward.int.ebiederm.org),
this series converts weak functions in kexec to use the #ifdef approach.
Quoting the 3e35142ef9 ("kexec_file: drop weak attribute from
arch_kexec_apply_relocations[_add]") changelog:
: Since commit d1bcae833b32f1 ("ELF: Don't generate unused section symbols")
: [1], binutils (v2.36+) started dropping section symbols that it thought
: were unused. This isn't an issue in general, but with kexec_file.c, gcc
: is placing kexec_arch_apply_relocations[_add] into a separate
: .text.unlikely section and the section symbol ".text.unlikely" is being
: dropped. Due to this, recordmcount is unable to find a non-weak symbol in
: .text.unlikely to generate a relocation record against.
This patch (of 2);
Drop __weak attribute from functions in kexec_file.c:
- arch_kexec_kernel_image_probe()
- arch_kimage_file_post_load_cleanup()
- arch_kexec_kernel_image_load()
- arch_kexec_locate_mem_hole()
- arch_kexec_kernel_verify_sig()
arch_kexec_kernel_image_load() calls into kexec_image_load_default(), so
drop the static attribute for the latter.
arch_kexec_kernel_verify_sig() is not overridden by any architecture, so
drop the __weak attribute.
Link: https://lkml.kernel.org/r/cover.1656659357.git.naveen.n.rao@linux.vnet.ibm.com
Link: https://lkml.kernel.org/r/2cd7ca1fe4d6bb6ca38e3283c717878388ed6788.1656659357.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Suggested-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The console_stop() and console_start() functions call pr_flush().
When suspending, these functions are called by the serial subsystem
while the serial port is suspended. In this scenario, if there are
any pending messages, a call to pr_flush() will always result in a
timeout because the serial port cannot make forward progress. This
causes longer suspend and resume times.
Add a check in pr_flush() so that it will immediately timeout if
the consoles are suspended.
Fixes: 3b604ca812 ("printk: add pr_flush()")
Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220715061042.373640-2-john.ogness@linutronix.de
The commit 7337224fc1 ("bpf: Improve the info.func_info and info.func_info_rec_size behavior")
accidently made bpf_prog_ksym_set_name() conservative for bpf subprograms.
Fixed it so instead of "bpf_prog_tag_F" the stack traces print "bpf_prog_tag_full_subprog_name".
Fixes: 7337224fc1 ("bpf: Improve the info.func_info and info.func_info_rec_size behavior")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220714211637.17150-1-alexei.starovoitov@gmail.com
For diagnostic purposes, this patch, in addition to keeping a record/or
track of the last known unloaded module, we now will include the
module's taint flag(s) too e.g: " [last unloaded: fpga_mgr_mod(OE)]"
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
No functional change.
With this patch a given module's state information (i.e. 'mod->state')
can be omitted from the specified buffer. Please note that this is in
preparation to include the last unloaded module's taint flag(s),
if available.
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
"numa_stat" should not be included in the scope of CONFIG_HUGETLB_PAGE, if
CONFIG_HUGETLB_PAGE is not configured even if CONFIG_NUMA is configured,
"numa_stat" is missed form /proc. Move it out of CONFIG_HUGETLB_PAGE to
fix it.
Fixes: 4518085e12 ("mm, sysctl: make NUMA stats configurable")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bpf and wireless.
Still no major regressions, the release continues to be calm. An
uptick of fixes this time around due to trivial data race fixes and
patches flowing down from subtrees.
There has been a few driver fixes (particularly a few fixes for false
positives due to 66e4c8d950 which went into -next in May!) that make
me worry the wide testing is not exactly fully through.
So "calm" but not "let's just cut the final ASAP" vibes over here.
Current release - regressions:
- wifi: rtw88: fix write to const table of channel parameters
Current release - new code bugs:
- mac80211: add gfp_t arg to ieeee80211_obss_color_collision_notify
- mlx5:
- TC, allow offload from uplink to other PF's VF
- Lag, decouple FDB selection and shared FDB
- Lag, correct get the port select mode str
- bnxt_en: fix and simplify XDP transmit path
- r8152: fix accessing unset transport header
Previous releases - regressions:
- conntrack: fix crash due to confirmed bit load reordering (after
atomic -> refcount conversion)
- stmmac: dwc-qos: disable split header for Tegra194
Previous releases - always broken:
- mlx5e: ring the TX doorbell on DMA errors
- bpf: make sure mac_header was set before using it
- mac80211: do not wake queues on a vif that is being stopped
- mac80211: fix queue selection for mesh/OCB interfaces
- ip: fix dflt addr selection for connected nexthop
- seg6: fix skb checksums for SRH encapsulation/insertion
- xdp: fix spurious packet loss in generic XDP TX path
- bunch of sysctl data race fixes
- nf_log: incorrect offset to network header
Misc:
- bpf: add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs"
* tag 'net-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
nfp: flower: configure tunnel neighbour on cmsg rx
net/tls: Check for errors in tls_device_init
MAINTAINERS: Add an additional maintainer to the AMD XGBE driver
xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue
selftests/net: test nexthop without gw
ip: fix dflt addr selection for connected nexthop
net: atlantic: remove aq_nic_deinit() when resume
net: atlantic: remove deep parameter on suspend/resume functions
sfc: fix kernel panic when creating VF
seg6: bpf: fix skb checksum in bpf_push_seg6_encap()
seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors
seg6: fix skb checksum evaluation in SRH encapsulation/insertion
sfc: fix use after free when disabling sriov
net: sunhme: output link status with a single print.
r8152: fix accessing unset transport header
net: stmmac: fix leaks in probe
net: ftgmac100: Hold reference returned by of_get_child_by_name()
nexthop: Fix data-races around nexthop_compat_mode.
ipv4: Fix data-races around sysctl_ip_dynaddr.
tcp: Fix a data-race around sysctl_tcp_ecn_fallback.
...
Pull integrity fixes from Mimi Zohar:
"Here are a number of fixes for recently found bugs.
Only 'ima: fix violation measurement list record' was introduced in
the current release. The rest address existing bugs"
* tag 'integrity-v5.19-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Fix potential memory leak in ima_init_crypto()
ima: force signature verification when CONFIG_KEXEC_SIG is configured
ima: Fix a potential integer overflow in ima_appraise_measurement
ima: fix violation measurement list record
Revert "evm: Fix memleak in init_desc"
Pull cgroup fix from Tejun Heo:
"Fix an old and subtle bug in the migration path.
css_sets are used to track tasks and migrations are tasks moving from
a group of css_sets to another group of css_sets. The migration path
pins all source and destination css_sets in the prep stage.
Unfortunately, it was overloading the same list_head entry to track
sources and destinations, which got confused for migrations which are
partially identity leading to use-after-frees.
Fixed by using dedicated list_heads for tracking sources and
destinations"
* tag 'cgroup-for-5.19-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Use separate src/dst nodes when preloading css_sets for migration
Currently, an unsigned kernel could be kexec'ed when IMA arch specific
policy is configured unless lockdown is enabled. Enforce kernel
signature verification check in the kexec_file_load syscall when IMA
arch specific policy is configured.
Fixes: 99d5cadfde ("kexec_file: split KEXEC_VERIFY_SIG into KEXEC_SIG and KEXEC_SIG_FORCE")
Reported-and-suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_dointvec_ms_jiffies() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side. For now,
proc_dointvec_ms_jiffies() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_dou8vec_minmax() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side. For now,
proc_dou8vec_minmax() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.
Fixes: cb94441306 ("sysctl: add proc_dou8vec_minmax()")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
