It is very likely that there are several blocks in bio, it is very
inefficient if we get their csums one by one. This patch improves
this problem by getting the csums in batch.
According to the result of the following test, the execute time of
__btrfs_lookup_bio_sums() is down by ~28%(300us -> 217us).
# dd if=<mnt>/file of=/dev/null bs=1M count=1024
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
set_extent_bit()'s (u64 *failed_start) expects NULL not 0.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Tejun writes:
-----
This is the pull request for the earlier patchset[1] with the same
name. It's only three patches (the first one was committed to
workqueue tree) but the merge strategy is a bit involved due to the
dependencies.
* Because the conversion needs features from wq/for-3.10,
block/for-3.10/core is based on rc3, and wq/for-3.10 has conflicts
with rc3, I pulled mainline (rc5) into wq/for-3.10 to prevent those
workqueue conflicts from flaring up in block tree.
* Resolving the issue that Jan and Dave raised about debugging
requires arch-wide changes. The patchset is being worked on[2] but
it'll have to go through -mm after these changes show up in -next,
and not included in this pull request.
The three commits are located in the following git branch.
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git writeback-workqueue
Pulling it into block/for-3.10/core produces a conflict in
drivers/md/raid5.c between the following two commits.
e3620a3ad5 ("MD RAID5: Avoid accessing gendisk or queue structs when not available")
2f6db2a707 ("raid5: use bio_reset()")
The conflict is trivial - one removes an "if ()" conditional while the
other removes "rbi->bi_next = NULL" right above it. We just need to
remove both. The merged branch is available at
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git block-test-merge
so that you can use it for verification. The test merge commit has
proper merge description.
While these changes are a bit of pain to route, they make code simpler
and even have, while minute, measureable performance gain[3] even on a
workload which isn't particularly favorable to showing the benefits of
this conversion.
----
Fixed up the conflict.
Conflicts:
drivers/md/raid5.c
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Btrfs uses page_mkwrite to ensure stable pages during
crc calculations and mmap workloads. We call clear_page_dirty_for_io
before we do any crcs, and this forces any application with the file
mapped to wait for the crc to finish before it is allowed to change
the file.
With compression on, the clear_page_dirty_for_io step is happening after
we've compressed the pages. This means the applications might be
changing the pages while we are compressing them, and some of those
modifications might not hit the disk.
This commit adds the clear_page_dirty_for_io before compression starts
and makes sure to redirty the page if we have to fallback to
uncompressed IO as well.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Reported-by: Alexandre Oliva <oliva@gnu.org>
cc: stable@vger.kernel.org
Just a little convenience macro - main reason to add it now is preparing
for immutable bio vecs, it'll reduce the size of the patch that puts
bi_sector/bi_size/bi_idx into a struct bvec_iter.
Signed-off-by: Kent Overstreet <koverstreet@google.com>
CC: Jens Axboe <axboe@kernel.dk>
CC: Lars Ellenberg <drbd-dev@lists.linbit.com>
CC: Jiri Kosina <jkosina@suse.cz>
CC: Alasdair Kergon <agk@redhat.com>
CC: dm-devel@redhat.com
CC: Neil Brown <neilb@suse.de>
CC: Martin Schwidefsky <schwidefsky@de.ibm.com>
CC: Heiko Carstens <heiko.carstens@de.ibm.com>
CC: linux-s390@vger.kernel.org
CC: Chris Mason <chris.mason@fusionio.com>
CC: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
We want to avoid module.h where posible, since it in turn includes
nearly all of header space. This means removing it where it is not
required, and using export.h where we are only exporting symbols via
EXPORT_SYMBOL and friends.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The nodesize is capped at 64k and there are enough pages preallocated in
extent_buffer::inline_pages. The fallback to kmalloc never happened
because even on the smallest page size considered (4k) inline_pages
covered the needs.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Though most of the btrfs codes are using ALIGN macro for page alignment,
there are still some codes using open-coded alignment like the
following:
------
u64 mask = ((u64)root->stripesize - 1);
u64 ret = (val + mask) & ~mask;
------
Or even hidden one:
------
num_bytes = (end - start + blocksize) & ~(blocksize - 1);
------
Sometimes these open-coded alignment is not so easy to understand for
newbie like me.
This commit changes the open-coded alignment to the ALIGN macro for a
better readability.
Also there is a previous patch from David Sterba with similar changes,
but the patch is for 3.2 kernel and seems not merged.
http://www.spinics.net/lists/linux-btrfs/msg12747.html
Cc: David Sterba <dave@jikos.cz>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
->dirty_metadata_bytes is accessed very frequently, so use percpu
counter instead of the u64 variant to reduce the contention of
the lock.
This patch also fixed the problem that we access it without
lock protection in __btrfs_btree_balance_dirty(), which may
cause we skip the dirty pages flush.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Use wrapper page_offset to get byte-offset into filesystem object for page.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
The extent buffers have a refs_lock which we use to make coordinate freeing
the extent buffer with operations on the radix tree. On tree roots and
other extent buffers that very cache hot, this can be highly contended.
These are also the extent buffers that are basically pinned in memory.
This commit adds code to cmpxchg our way through the ref modifications,
and as long as the result of the reference change is still pinned in
ram, we skip the expensive spinlock.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
This builds on David Woodhouse's original Btrfs raid5/6 implementation.
The code has changed quite a bit, blame Chris Mason for any bugs.
Read/modify/write is done after the higher levels of the filesystem have
prepared a given bio. This means the higher layers are not responsible
for building full stripes, and they don't need to query for the topology
of the extents that may get allocated during delayed allocation runs.
It also means different files can easily share the same stripe.
But, it does expose us to incorrect parity if we crash or lose power
while doing a read/modify/write cycle. This will be addressed in a
later commit.
Scrub is unable to repair crc errors on raid5/6 chunks.
Discard does not work on raid5/6 (yet)
The stripe size is fixed at 64KiB per disk. This will be tunable
in a later commit.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We'll want to merge writes so they can fill a full RAID[56] stripe, but
not necessarily reads.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
With the addition of the device replace procedure, it is possible
for btrfs_map_bio(READ) to report an error. This happens when the
specific mirror is requested which is located on the target disk,
and the copy operation has not yet copied this block. Hence the
block cannot be read and this error state is indicated by
returning EIO.
Some background information follows now. A new mirror is added
while the device replace procedure is running.
btrfs_get_num_copies() returns one more, and
btrfs_map_bio(GET_READ_MIRROR) adds one more mirror if a disk
location is involved that was already handled by the device
replace copy operation. The assigned mirror num is the highest
mirror number, e.g. the value 3 in case of RAID1.
If btrfs_map_bio() is invoked with mirror_num == 0 (i.e., select
any mirror), the copy on the target drive is never selected
because that disk shall be able to perform the write requests as
quickly as possible. The parallel execution of read requests would
only slow down the disk copy procedure. Second case is that
btrfs_map_bio() is called with mirror_num > 0. This is done from
the repair code only. In this case, the highest mirror num is
assigned to the target disk, since it is used last. And when this
mirror is not available because the copy procedure has not yet
handled this area, an error is returned. Everywhere in the code
the handling of such errors is added now.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
This is required for the device replace procedure in a later step.
Two calling functions also had to be changed to have the fs_info
pointer: repair_io_failure() and scrub_setup_recheck_block().
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
This is required for the device replace procedure in a later step.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Use WARN rather than printk followed by WARN_ON(1), for conciseness.
A simplified version of the semantic patch that makes this transformation
is as follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression list es;
@@
-printk(
+WARN(1,
es);
-WARN_ON(1);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Pull btrfs fixes from Chris Mason:
"This has our series of fixes for the next rc. The biggest batch is
from Jan Schmidt, fixing up some problems in our subvolume quota code
and fixing btrfs send/receive to work with the new extended inode
refs."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: do not bug when we fail to commit the transaction
Btrfs: fix memory leak when cloning root's node
Btrfs: Use btrfs_update_inode_fallback when creating a snapshot
Btrfs: Send: preserve ownership (uid and gid) also for symlinks.
Btrfs: fix deadlock caused by the nested chunk allocation
btrfs: Return EINVAL when length to trim is less than FSB
Btrfs: fix memory leak in btrfs_quota_enable()
Btrfs: send correct rdev and mode in btrfs-send
Btrfs: extended inode refs support for send mechanism
Btrfs: Fix wrong error handling code
Fix a sign bug causing invalid memory access in the ino_paths ioctl.
Btrfs: comment for loop in tree_mod_log_insert_move
Btrfs: fix extent buffer reference for tree mod log roots
Btrfs: determine level of old roots
Btrfs: tree mod log's old roots could still be part of the tree
Btrfs: fix a tree mod logging issue for root replacement operations
Btrfs: don't put removals from push_node_left into tree mod log twice
gcc says "warning: comparison of unsigned expression >= 0 is always
true" because i is an unsigned long. And gcc is right this time.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Pull btrfs update from Chris Mason:
"This is a large pull, with the bulk of the updates coming from:
- Hole punching
- send/receive fixes
- fsync performance
- Disk format extension allowing more hardlinks inside a single
directory (btrfs-progs patch required to enable the compat bit for
this one)
I'm cooking more unrelated RAID code, but I wanted to make sure this
original batch makes it in. The largest updates here are relatively
old and have been in testing for some time."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (121 commits)
btrfs: init ref_index to zero in add_inode_ref
Btrfs: remove repeated eb->pages check in, disk-io.c/csum_dirty_buffer
Btrfs: fix page leakage
Btrfs: do not warn_on when we cannot alloc a page for an extent buffer
Btrfs: don't bug on enomem in readpage
Btrfs: cleanup pages properly when ENOMEM in compression
Btrfs: make filesystem read-only when submitting barrier fails
Btrfs: detect corrupted filesystem after write I/O errors
Btrfs: make compress and nodatacow mount options mutually exclusive
btrfs: fix message printing
Btrfs: don't bother committing delayed inode updates when fsyncing
btrfs: move inline function code to header file
Btrfs: remove unnecessary IS_ERR in bio_readpage_error()
btrfs: remove unused function btrfs_insert_some_items()
Btrfs: don't commit instead of overcommitting
Btrfs: confirmation of value is added before trace_btrfs_get_extent() is called
Btrfs: be smarter about dropping things from the tree log
Btrfs: don't lookup csums for prealloc extents
Btrfs: cache extent state when writing out dirty metadata pages
Btrfs: do not hold the file extent leaf locked when adding extent item
...
Alloc_dummy_extent_buffer will not free the first page in the eb array if we
fail to allocate a page, fix this. Thanks,
Reported-by: David Sterba <dave@jikos.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
It's just annoying and the user will have gotten a nice OOM killer message
so they are already fully aware they are screwed :). Thanks,
Reported-by: Jérôme Poulin <jeromepoulin@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Get rid of the BUG_ON(ret == -ENOMEM) in __extent_read_full_page. Thanks,
Reported-by: Jérôme Poulin <jeromepoulin@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
When building btrfs from kernel code, it will report:
fs/btrfs/extent_io.h:281: warning: 'extent_buffer_page' declared inline after being called
fs/btrfs/extent_io.h:281: warning: previous declaration of 'extent_buffer_page' was here
fs/btrfs/extent_io.h:280: warning: 'num_extent_pages' declared inline after being called
fs/btrfs/extent_io.h:280: warning: previous declaration of 'num_extent_pages' was here
because of the wrong declaration of inline functions.
Signed-off-by: Robin Dong <sanbai@taobao.com>
Everytime we write out dirty pages we search for an offset in the tree,
convert the bits in the state, and then when we wait we search for the
offset again and clear the bits. So for every dirty range in the io tree we
are doing 4 rb searches, which is suboptimal. With this patch we are only
doing 2 searches for every cycle (modulo weird things happening). Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
There are a coule scenarios where farming metadata csumming off to an async
thread doesn't help. The first is if our processor supports crc32c, in
which case the csumming will be fast and so the overhead of the async model
is not worth the cost. The other case is for our tree log. We will be
making that stuff dirty and writing it out and waiting for it immediately.
Even with software crc32c this gives me a ~15% increase in speed with O_SYNC
workloads. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We can race when checking wether PagePrivate is set on a page and we
actually have an eb saved in the pages private pointer. We could have
easily written out this page and released it in the time that we did the
pagevec lookup and actually got around to looking at this page. So use
mapping->private_lock to ensure we get a consistent view of the
page->private pointer. This is inline with the alloc and releasepage paths
which use private_lock when manipulating page->private. Thanks,
Reported-by: David Sterba <dave@jikos.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
There's no reason to call rcu_barrier() on every
deactivate_locked_super(). We only need to make sure that all delayed rcu
free inodes are flushed before we destroy related cache.
Removing rcu_barrier() from deactivate_locked_super() affects some fast
paths. E.g. on my machine exit_group() of a last process in IPC
namespace takes 0.07538s. rcu_barrier() takes 0.05188s of that time.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
For immutable bio vecs, I've been auditing and removing bi_idx
references. These were harmless, but removing them will make auditing
easier.
scrub_bio_end_io_worker() was open coding a bio_reset() - but this
doesn't appear to have been needed for anything as right after it does a
bio_put(), and perusing the code it doesn't appear anything else was
holding a reference to the bio.
The other use end_bio_extent_readpage() was just for a pr_debug() -
changed it to something that might be a bit more useful.
Signed-off-by: Kent Overstreet <koverstreet@google.com>
CC: Chris Mason <chris.mason@oracle.com>
CC: Stefan Behrens <sbehrens@giantdisaster.de>
We're going to use this flag EXTENT_DEFRAG to indicate which range
belongs to defragment so that we can implement snapshow-aware defrag:
We set the EXTENT_DEFRAG flag when dirtying the extents that need
defragmented, so later on writeback thread can differentiate between
normal writeback and writeback started by defragmentation.
Original-Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
The btrfs send code was assuming the offset of the file item into the
extent translated to bytes on disk. If we're compressed, this isn't
true, and so it was off into extents owned by other files.
It was also improperly handling inline extents. This solves a crash
where we may have gone past the end of the file extent item by not
testing early enough for an inline extent. It also solves problems
where we have a whole between the end of the inline item and the start
of the full extent.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Pull btrfs fixes from Chris Mason:
"I've split out the big send/receive update from my last pull request
and now have just the fixes in my for-linus branch. The send/recv
branch will wander over to linux-next shortly though.
The largest patches in this pull are Josef's patches to fix DIO
locking problems and his patch to fix a crash during balance. They
are both well tested.
The rest are smaller fixes that we've had queued. The last rc came
out while I was hacking new and exciting ways to recover from a
misplaced rm -rf on my dev box, so these missed rc3."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (25 commits)
Btrfs: fix that repair code is spuriously executed for transid failures
Btrfs: fix ordered extent leak when failing to start a transaction
Btrfs: fix a dio write regression
Btrfs: fix deadlock with freeze and sync V2
Btrfs: revert checksum error statistic which can cause a BUG()
Btrfs: remove superblock writing after fatal error
Btrfs: allow delayed refs to be merged
Btrfs: fix enospc problems when deleting a subvol
Btrfs: fix wrong mtime and ctime when creating snapshots
Btrfs: fix race in run_clustered_refs
Btrfs: don't run __tree_mod_log_free_eb on leaves
Btrfs: increase the size of the free space cache
Btrfs: barrier before waitqueue_active
Btrfs: fix deadlock in wait_for_more_refs
btrfs: fix second lock in btrfs_delete_delayed_items()
Btrfs: don't allocate a seperate csums array for direct reads
Btrfs: do not strdup non existent strings
Btrfs: do not use missing devices when showing devname
Btrfs: fix that error value is changed by mistake
Btrfs: lock extents as we map them in DIO
...
Commit 442a4f6308 added btrfs device
statistic counters for detected IO and checksum errors to Linux 3.5.
The statistic part that counts checksum errors in
end_bio_extent_readpage() can cause a BUG() in a subfunction:
"kernel BUG at fs/btrfs/volumes.c:3762!"
That part is reverted with the current patch.
However, the counting of checksum errors in the scrub context remains
active, and the counting of detected IO errors (read, write or flush
errors) in all contexts remains active.
Cc: stable <stable@vger.kernel.org> # 3.5
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Pull large btrfs update from Chris Mason:
"This pull request is very large, and the two main features in here
have been under testing/devel for quite a while.
We have subvolume quotas from the strato developers. This enables
full tracking of how many blocks are allocated to each subvolume (and
all snapshots) and you can set limits on a per-subvolume basis. You
can also create quota groups and toss multiple subvolumes into a big
group. It's everything you need to be a web hosting company and give
each user their own subvolume.
The userland side of the quotas is being refreshed, they'll send out
details on where to grab it soon.
Next is the kernel side of btrfs send/receive from Alexander Block.
This leverages the same infrastructure as the quota code to figure out
relationships between blocks and their owners. It can then compute
the difference between two snapshots and sends the diffs in a neutral
format into userland.
The basic model:
create a snapshot
send that snapshot as the initial backup
make changes
create a second snapshot
send the incremental as a backup
delete the first snapshot
(use the second snapshot for the next incremental)
The receive portion is all in userland, and in the 'next' branch of my
btrfs-progs repo.
There's still some work to do in terms of optimizing the send side
from kernel to userland. The really important part is figuring out
how two snapshots are different, and this is where we are
concentrating right now. The initial send of a dataset is a little
slower than tar, but the incremental sends are dramatically faster
than what rsync can do.
On top of all of that, we have a nice queue of fixes, cleanups and
optimizations."
Fix up trivial modify/del conflict in fs/btrfs/ioctl.c
Also fix up semantic conflict in fs/btrfs/send.c: the interface to
dentry_open() changed in commit 765927b2d5 ("switch dentry_open() to
struct path, make it grab references itself"), and since it now grabs
whatever references it needs, we should no longer do the mntget() on the
mnt (and we need to dput() the dentry reference we took).
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (65 commits)
Btrfs: uninit variable fixes in send/receive
Btrfs: introduce BTRFS_IOC_SEND for btrfs send/receive
Btrfs: add btrfs_compare_trees function
Btrfs: introduce subvol uuids and times
Btrfs: make iref_to_path non static
Btrfs: add a barrier before a waitqueue_active check
Btrfs: call the ordered free operation without any locks held
Btrfs: Check INCOMPAT flags on remount and add helper function
Btrfs: add helper for tree enumeration
btrfs: allow cross-subvolume file clone
Btrfs: improve multi-thread buffer read
Btrfs: make btrfs's allocation smoothly with preallocation
Btrfs: lock the transition from dirty to writeback for an eb
Btrfs: fix potential race in extent buffer freeing
Btrfs: don't return true in releasepage unless we actually freed the eb
Btrfs: suppress printk() if all device I/O stats are zero
Btrfs: remove unwanted printk() for btrfs device I/O stats
Btrfs: rewrite BTRFS_SETGET_FUNCS
Btrfs: zero unused bytes in inode item
Btrfs: kill free_space pointer from inode structure
...
Conflicts:
fs/btrfs/ioctl.c
Pull trivial tree from Jiri Kosina:
"Trivial updates all over the place as usual."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (29 commits)
Fix typo in include/linux/clk.h .
pci: hotplug: Fix typo in pci
iommu: Fix typo in iommu
video: Fix typo in drivers/video
Documentation: Add newline at end-of-file to files lacking one
arm,unicore32: Remove obsolete "select MISC_DEVICES"
module.c: spelling s/postition/position/g
cpufreq: Fix typo in cpufreq driver
trivial: typo in comment in mksysmap
mach-omap2: Fix typo in debug message and comment
scsi: aha152x: Fix sparse warning and make printing pointer address more portable.
Change email address for Steve Glendinning
Btrfs: fix typo in convert_extent_bit
via: Remove bogus if check
netprio_cgroup.c: fix comment typo
backlight: fix memory leak on obscure error path
Documentation: asus-laptop.txt references an obsolete Kconfig item
Documentation: ManagementStyle: fixed typo
mm/vmscan: cleanup comment error in balance_pgdat
mm: cleanup on the comments of zone_reclaim_stat
...
While testing with my buffer read fio jobs[1], I find that btrfs does not
perform well enough.
Here is a scenario in fio jobs:
We have 4 threads, "t1 t2 t3 t4", starting to buffer read a same file,
and all of them will race on add_to_page_cache_lru(), and if one thread
successfully puts its page into the page cache, it takes the responsibility
to read the page's data.
And what's more, reading a page needs a period of time to finish, in which
other threads can slide in and process rest pages:
t1 t2 t3 t4
add Page1
read Page1 add Page2
| read Page2 add Page3
| | read Page3 add Page4
| | | read Page4
-----|------------|-----------|-----------|--------
v v v v
bio bio bio bio
Now we have four bios, each of which holds only one page since we need to
maintain consecutive pages in bio. Thus, we can end up with far more bios
than we need.
Here we're going to
a) delay the real read-page section and
b) try to put more pages into page cache.
With that said, we can make each bio hold more pages and reduce the number
of bios we need.
Here is some numbers taken from fio results:
w/o patch w patch
------------- -------- ---------------
READ: 745MB/s +25% 934MB/s
[1]:
[global]
group_reporting
thread
numjobs=4
bs=32k
rw=read
ioengine=sync
directory=/mnt/btrfs/
[READ]
filename=foobar
size=2000M
invalidate=1
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
There is a small window where an eb can have no IO bits set on it, which
could potentially result in extent_buffer_under_io() returning false when we
want it to return true, which could result in not fun things happening. So
in order to protect this case we need to hold the refs_lock when we make
this transition to make sure we get reliable results out of
extent_buffer_udner_io(). Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
This sounds sort of impossible but it is the only thing I can think of and
at the very least it is theoretically possible so here it goes.
If we are in try_release_extent_buffer we will check that the ref count on
the extent buffer is 1 and not under IO, and then go down and clear the tree
ref. If between this check and clearing the tree ref somebody else comes in
and grabs a ref on the eb and the marks it dirty before
try_release_extent_buffer() does it's tree ref clear we can end up with a
dirty eb that will be freed while it is still dirty which will result in a
panic. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
I noticed while looking at an extent_buffer race that we will
unconditionally return 1 if we get down to release_extent_buffer after
clearing the tree ref. However we can easily race in here and get a ref on
the eb and not actually free the eb. So make release_extent_buffer return 1
if it free'd the eb and 0 if not so we can be a little kinder to the vm.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We can race with unlink and not actually be able to do our igrab in
btrfs_add_ordered_extent. This will result in all sorts of problems.
Instead of doing the complicated work to try and handle returning an error
properly from btrfs_add_ordered_extent, just hold a ref to the inode during
writepages. If we cannot grab a ref we know we're freeing this inode anyway
and can just drop the dirty pages on the floor, because screw them we're
going to invalidate them anyway. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Al pointed out that we can just toss out the old name on a device and add a
new one arbitrarily, so anybody who uses device->name in printk could
possibly use free'd memory. Instead of adding locking around all of this he
suggested doing it with RCU, so I've introduced a struct rcu_string that
does just that and have gone through and protected all accesses to
device->name that aren't under the uuid_mutex with rcu_read_lock(). This
protects us and I will use it for dealing with removing the device that we
used to mount the file system in a later patch. Thanks,
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <josef@redhat.com>
The goal is to detect when drives start to get an increased error rate,
when drives should be replaced soon. Therefore statistic counters are
added that count IO errors (read, write and flush). Additionally, the
software detected errors like checksum errors and corrupted blocks are
counted.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Fully utilize our extent state's new helper functions to use
fastpath as much as possible.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Reviewed-by: Josef Bacik <josef@redhat.com>
We noticed that the ordered extent completion doesn't really rely on having
a page and that it could be done independantly of ending the writeback on a
page. This patch makes us not do the threaded endio stuff for normal
buffered writes and direct writes so we can end page writeback as soon as
possible (in irq context) and only start threads to do the ordered work when
it is actually done. Compression needs to be reworked some to take
advantage of this as well, but atm it has to do a find_get_page in its endio
handler so it must be done in its own thread. This makes direct writes
quite a bit faster. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
These warnings are bogus since we will always have at least one page in an
eb, but to make the compiler happy just set ret = 0 in these two cases.
Thanks,
Btrfs: fix compile warnings in extent_io.c
These warnings are bogus since we will always have at least one page in an
eb, but to make the compiler happy just set ret = 0 in these two cases.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
The tree modification log needs two ways to create dummy extent buffers,
once by allocating a fresh one (to rebuild an old root) and once by
cloning an existing one (to make private rewind modifications) to it.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
In tree_insert, var *entry is used in the loop only, and is useless
out of the loop. Remove the useless assignment after the loop.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
The return value of find_first_extent_bit is 1 or 0, no < 0.
And if found something, return 0; if nothing was found, return 1.
Fix the comment.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
num_extent_pages returns the number of pages in the specific range, not
the index of the last page in the eb range.
btrfs_release_extent_buffer_page is called with start_idx set 0 in current
codes, so it's not a problem yet. But the logic is indeed wrong.
Fix it here.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Pull btrfs fixes from Chris Mason:
"The big ones here are a memory leak we introduced in rc1, and a
scheduling while atomic if the transid on disk doesn't match the
transid we expected. This happens for corrupt blocks, or out of date
disks.
It also fixes up the ioctl definition for our ioctl to resolve logical
inode numbers. The __u32 was a merging error and doesn't match what
we ship in the progs."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: avoid sleeping in verify_parent_transid while atomic
Btrfs: fix crash in scrub repair code when device is missing
btrfs: Fix mismatching struct members in ioctl.h
Btrfs: fix page leak when allocing extent buffers
Btrfs: Add properly locking around add_root_to_dirty_list
If we happen to alloc a extent buffer and then alloc a page and notice that
page is already attached to an extent buffer, we will only unlock it and
free our existing eb. Any pages currently attached to that eb will be
properly freed, but we don't do the page_cache_release() on the page where
we noticed the other extent buffer which can cause us to leak pages and I
hope cause the weird issues we've been seeing in this area. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Pull btrfs fixes from Chris Mason:
"This has our collection of bug fixes. I missed the last rc because I
thought our patches were making NFS crash during my xfs test runs.
Turns out it was an NFS client bug fixed by someone else while I tried
to bisect it.
All of these fixes are small, but some are fairly high impact. The
biggest are fixes for our mount -o remount handling, a deadlock due to
GFP_KERNEL allocations in readdir, and a RAID10 error handling bug.
This was tested against both 3.3 and Linus' master as of this morning."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (26 commits)
Btrfs: reduce lock contention during extent insertion
Btrfs: avoid deadlocks from GFP_KERNEL allocations during btrfs_real_readdir
Btrfs: Fix space checking during fs resize
Btrfs: fix block_rsv and space_info lock ordering
Btrfs: Prevent root_list corruption
Btrfs: fix repair code for RAID10
Btrfs: do not start delalloc inodes during sync
Btrfs: fix that check_int_data mount option was ignored
Btrfs: don't count CRC or header errors twice while scrubbing
Btrfs: fix btrfs_ioctl_dev_info() crash on missing device
btrfs: don't return EINTR
Btrfs: double unlock bug in error handling
Btrfs: always store the mirror we read the eb from
fs/btrfs/volumes.c: add missing free_fs_devices
btrfs: fix early abort in 'remount'
Btrfs: fix max chunk size check in chunk allocator
Btrfs: add missing read locks in backref.c
Btrfs: don't call free_extent_buffer twice in iterate_irefs
Btrfs: Make free_ipath() deal gracefully with NULL pointers
Btrfs: avoid possible use-after-free in clear_extent_bit()
...
A user reported a panic where we were trying to fix a bad mirror but the
mirror number we were giving was 0, which is invalid. This is because we
don't do the transid verification until after the read, so as far as the
read code is concerned the read was a success. So instead store the mirror
we read from so that if there is some failure post read we know which mirror
to try next and which mirror needs to be fixed if we find a good copy of the
block. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
clear_extent_bit()
{
next_node = rb_next(&state->rb_node);
...
clear_state_bit(state); <-- this may free next_node
if (next_node) {
state = rb_entry(next_node);
...
}
}
clear_state_bit() calls merge_state() which may free the next node
of the passing extent_state, so clear_extent_bit() may end up
referencing freed memory.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Currently it returns a set of bits that were cleared, but this return
value is not used at all.
Moreover it doesn't seem to be useful, because we may clear the bits
of a few extent_states, but only the cleared bits of last one is
returned.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Pull the minimal btrfs branch from Chris Mason:
"We have a use-after-free in there, along with errors when mount -o
discard is enabled, and a BUG_ON(we should compile with UP more
often)."
* 'for-linus-min' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: use commit root when loading free space cache
Btrfs: fix use-after-free in __btrfs_end_transaction
Btrfs: check return value of bio_alloc() properly
Btrfs: remove lock assert from get_restripe_target()
Btrfs: fix eof while discarding extents
Btrfs: fix uninit variable in repair_eb_io_failure
Revert "Btrfs: increase the global block reserve estimates"
bio_alloc() has the possibility of returning NULL.
So, it is necessary to check the return value.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We'd have to be passing bogus extent buffers for this uninit variable to
actually be used, but set it to zero just in case.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Pull btrfs fixes and features from Chris Mason:
"We've merged in the error handling patches from SuSE. These are
already shipping in the sles kernel, and they give btrfs the ability
to abort transactions and go readonly on errors. It involves a lot of
churn as they clarify BUG_ONs, and remove the ones we now properly
deal with.
Josef reworked the way our metadata interacts with the page cache.
page->private now points to the btrfs extent_buffer object, which
makes everything faster. He changed it so we write an whole extent
buffer at a time instead of allowing individual pages to go down,,
which will be important for the raid5/6 code (for the 3.5 merge
window ;)
Josef also made us more aggressive about dropping pages for metadata
blocks that were freed due to COW. Overall, our metadata caching is
much faster now.
We've integrated my patch for metadata bigger than the page size.
This allows metadata blocks up to 64KB in size. In practice 16K and
32K seem to work best. For workloads with lots of metadata, this cuts
down the size of the extent allocation tree dramatically and fragments
much less.
Scrub was updated to support the larger block sizes, which ended up
being a fairly large change (thanks Stefan Behrens).
We also have an assortment of fixes and updates, especially to the
balancing code (Ilya Dryomov), the back ref walker (Jan Schmidt) and
the defragging code (Liu Bo)."
Fixed up trivial conflicts in fs/btrfs/scrub.c that were just due to
removal of the second argument to k[un]map_atomic() in commit
7ac687d9e0.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (75 commits)
Btrfs: update the checks for mixed block groups with big metadata blocks
Btrfs: update to the right index of defragment
Btrfs: do not bother to defrag an extent if it is a big real extent
Btrfs: add a check to decide if we should defrag the range
Btrfs: fix recursive defragment with autodefrag option
Btrfs: fix the mismatch of page->mapping
Btrfs: fix race between direct io and autodefrag
Btrfs: fix deadlock during allocating chunks
Btrfs: show useful info in space reservation tracepoint
Btrfs: don't use crc items bigger than 4KB
Btrfs: flush out and clean up any block device pages during mount
btrfs: disallow unequal data/metadata blocksize for mixed block groups
Btrfs: enhance superblock sanity checks
Btrfs: change scrub to support big blocks
Btrfs: minor cleanup in scrub
Btrfs: introduce common define for max number of mirrors
Btrfs: fix infinite loop in btrfs_shrink_device()
Btrfs: fix memory leak in resolver code
Btrfs: allow dup for data chunks in mixed mode
Btrfs: validate target profiles only if we are going to use them
...
Since we need to read and write extent buffers in their entirety we can't use
the normal bio_readpage_error stuff since it only works on a per page basis. So
instead make it so that if we see an io error in endio we just mark the eb as
having an IO error and then in btree_read_extent_buffer_pages we will manually
try other mirrors and then overwrite the bad mirror if we find a good copy.
This works with larger than page size blocks. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This patch simplifies how we track our extent buffers. Previously we could exit
writepages with only having written half of an extent buffer, which meant we had
to track the state of the pages and the state of the extent buffers differently.
Now we only read in entire extent buffers and write out entire extent buffers,
this allows us to simply set bits in our bflags to indicate the state of the eb
and we no longer have to do things like track uptodate with our iotree. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Because an eb can have multiple pages we need to make sure that all pages within
the eb are markes as accessed, since releasepage can be called against any page
in the eb. This will keep us from possibly evicting hot eb's when we're doing
larger than pagesize eb's. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Because btrfs cow's we can end up with extent buffers that are no longer
necessary just sitting around in memory. So instead of evicting these pages, we
could end up evicting things we actually care about. Thus we have
free_extent_buffer_stale for use when we are freeing tree blocks. This will
make it so that the ref for the eb being in the radix tree is dropped as soon as
possible and then is freed when the refcount hits 0 instead of waiting to be
released by releasepage. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
We can run into a problem where we find an eb for our existing page already on
the radix tree but it has a ref count of 0. It hasn't yet been removed by RCU
yet so this can cause issues where we will use the EB after free. So do
atomic_inc_not_zero on the exists->refs and if it is zero just do
synchronize_rcu() and try again. We won't have to worry about new allocators
coming in since they will block on the page lock at this point. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
We spend a lot of time looking up extent buffers from pages when we could just
store the pointer to the eb the page is associated with in page->private. This
patch does just that, and it makes things a little simpler and reduces a bit of
CPU overhead involved with doing metadata IO. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
A few years ago the btrfs code to support blocks lager than
the page size was disabled to fix a few corner cases in the
page cache handling. This fixes the code to properly support
large metadata blocks again.
Since current kernels will crash early and often with larger
metadata blocks, this adds an incompat bit so that older kernels
can't mount it.
This also does away with different blocksizes for nodes and leaves.
You get a single block size for all tree blocks.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs currently handles most errors with BUG_ON. This patch is a work-in-
progress but aims to handle most errors other than internal logic
errors and ENOMEM more gracefully.
This iteration prevents most crashes but can run into lockups with
the page lock on occasion when the timing "works out."
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
set_extent_bit can do exclusive locking but only when called by lock_extent*,
Drop the exclusive bits argument except when called by lock_extent.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
lock_extent and unlock_extent are always called with GFP_NOFS, drop the
argument and use GFP_NOFS consistently.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
This pushes failures from the submit_bio_hook callbacks,
btrfs_submit_bio_hook and btree_submit_bio_hook into the callers, including
callers of submit_one_bio where it catches the failures with BUG_ON.
It also pushes up through the ->readpage_io_failed_hook to
end_bio_extent_writepage where the error is already caught with BUG_ON.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
In submit_extent_page, there's a visually noisy if statement that, in
the midst of other conditions, does the tree dependency for tree->ops
and tree->ops->merge_bio_hook before calling it, and then another
condition afterwards. If an error is returned from merge_bio_hook,
there's no way to catch it. It's considered a routine "1" return
value instead of a failure.
This patch factors out the dependency check into a new local merge_bio
routine and BUG's on an error. The if statement is less noisy as a side-
effect.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
There is only one caller of clear_extent_bit that checks the return value
and it only checks if it's negative. Since there are no users of the
returned bits functionality of clear_extent_bit, stop returning it
and avoid complicating error handling.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
The *_state functions can only return 0 or -EEXIST. This patch addresses
the cases where those functions returning -EEXIST represent a locking
failure. It handles them by panicking with an appropriate error message.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
If btrfs reads a block and finds a parent transid mismatch, it clears
the uptodate flags on the extent buffer, and the pages inside it. But
we only clear the uptodate bits in the state tree if the block straddles
more than one page.
This is from an old optimization from to reduce contention on the extent
state tree. But it is buggy because the code that retries a read from
a different copy of the block is going to find the uptodate state bits
set and skip the IO.
The end result of the bug is that we'll never actually read the good
copy (if there is one).
The fix here is to always clear the uptodate state bits, which is safe
because this code is only called when the parent transid fails.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Clearing a range's bits is different with setting them, since we don't
need to touch them when states do not contain bits we want.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
We encountered an issue that was easily observable on s/390 systems but
could really happen anywhere. The timing just seemed to hit reliably
on s/390 with limited memory.
The gist is that when an unexpected set_page_dirty() happened, we'd
run into the BUG() in btrfs_writepage_fixup_worker since it wasn't
properly set up for delalloc.
This patch does the following:
- Performs the missing delalloc in the fixup worker
- Allow the start hook to return -EBUSY which informs __extent_writepage
that it should mark the page skipped and not to redirty it. This is
required since the fixup worker can fail with -ENOSPC and the page
will have already been redirtied. That causes an Oops in
drop_outstanding_extents later. Retrying the fixup worker could
lead to an infinite loop. Deferring the page redirty also saves us
some cycles since the page would be stuck in a resubmit-redirty loop
until the fixup worker completes. It's not harmful, just wasteful.
- If the fixup worker fails, we mark the page and mapping as errored,
and end the writeback, similar to what we would do had the page
actually been submitted to writeback.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
A user has encountered a NULL pointer kernel oops in btrfs when
encountering media errors. The problem has been identified
as an unhandled NULL pointer returned from find_get_page().
This modification simply checks for a NULL page, and returns
with an error if found (the extent_range_uptodate() function
returns 1 on errors).
After testing this patch, the user reported that the error with
the NULL pointer oops was solved. However, there is still a
remaining problem with a thread becoming stuck in
wait_on_page_locked(page) in the read_extent_buffer_pages(...)
function in extent_io.c
for (i = start_i; i < num_pages; i++) {
page = extent_buffer_page(eb, i);
wait_on_page_locked(page);
if (!PageUptodate(page))
ret = -EIO;
}
This patch leaves the issue with the locked page yet to be resolved.
Signed-off-by: Mitch Harder <mitch.harder@sabayonlinux.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This patch adds the possibilty to read-lock an extent even if it is already
write-locked from the same thread. btrfs_find_all_roots() needs this
capability.
Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
This is the last part of the patch series. It modifies the btrfs
code to use the integrity check module if configured to do so
with the define BTRFS_FS_CHECK_INTEGRITY. If this define is not set,
the only effective change is that code is added that handles the
mount option to activate the integrity check. If the mount option is
set and the define BTRFS_FS_CHECK_INTEGRITY is not set, that code
complains in the log and the mount fails with EINVAL.
Add the mount option to activate the usage of the integrity check
code.
Add invocation of btrfs integrity check code init and cleanup
function on mount and umount, respectively.
Add hook to call btrfs integrity check code version of
submit_bh/submit_bio.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Drop spin lock in convert_extent_bit() when memory alloc fails,
otherwise, it will be a deadlock.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Commit 4a54c8c16 introduced raid-repair, killing the individual
readpage_io_failed_hook entries from inode.c and disk-io.c. Commit
4bb31e92 introduced new readahead code, adding a readpage_io_failed_hook to
disk-io.c.
The raid-repair commit had logic to disable raid-repair, if
readpage_io_failed_hook is set. Thus, the readahead commit effectively
disabled raid-repair for meta data.
This commit changes the logic to always attempt raid-repair when needed and
call the readpage_io_failed_hook in case raid-repair fails. This is much
more straight forward and should have been like that from the beginning.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Reported-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We've been hitting BUG()'s in btrfs_cont_expand and btrfs_fallocate and anywhere
else that calls btrfs_get_extent while running xfstests 13 in a loop. This is
because fiemap is calling btrfs_get_extent with non-sectorsize aligned offsets,
which will end up adding mappings that are not sectorsize aligned, which will
cause problems in some cases for subsequent calls to btrfs_get_extent for
similar areas that are sectorsize aligned. With this patch I ran xfstests 13 in
a loop for a couple of hours and didn't hit the problem that I could previously
hit in at most 20 minutes. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
