Pull dma-mapping updates from Christoph Hellwig:
- convert arm32 to the common dma-direct code (Arnd Bergmann, Robin
Murphy, Christoph Hellwig)
- restructure the PCIe peer to peer mapping support (Logan Gunthorpe)
- allow the IOMMU code to communicate an optional DMA mapping length
and use that in scsi and libata (John Garry)
- split the global swiotlb lock (Tianyu Lan)
- various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang,
Lukas Bulwahn, Robin Murphy)
* tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping: (45 commits)
swiotlb: fix passing local variable to debugfs_create_ulong()
dma-mapping: reformat comment to suppress htmldoc warning
PCI/P2PDMA: Remove pci_p2pdma_[un]map_sg()
RDMA/rw: drop pci_p2pdma_[un]map_sg()
RDMA/core: introduce ib_dma_pci_p2p_dma_supported()
nvme-pci: convert to using dma_map_sgtable()
nvme-pci: check DMA ops when indicating support for PCI P2PDMA
iommu/dma: support PCI P2PDMA pages in dma-iommu map_sg
iommu: Explicitly skip bus address marked segments in __iommu_map_sg()
dma-mapping: add flags to dma_map_ops to indicate PCI P2PDMA support
dma-direct: support PCI P2PDMA pages in dma-direct map_sg
dma-mapping: allow EREMOTEIO return code for P2PDMA transfers
PCI/P2PDMA: Introduce helpers for dma_map_sg implementations
PCI/P2PDMA: Attempt to set map_type if it has not been set
lib/scatterlist: add flag for indicating P2PDMA segments in an SGL
swiotlb: clean up some coding style and minor issues
dma-mapping: update comment after dmabounce removal
scsi: sd: Add a comment about limiting max_sectors to shost optimal limit
ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors
scsi: scsi_transport_sas: cap shost opt_sectors according to DMA optimal limit
...
Introduce the helper function ib_dma_pci_p2p_dma_supported() to check
if a given ib_device can be used in P2PDMA transfers. This ensures
the ib_device is not using virt_dma and also that the underlying
dma_device supports P2PDMA.
Use the new helper in nvme-rdma to replace the existing check for
ib_uses_virt_dma(). Adding the dma_pci_p2pdma_supported() check allows
switching away from pci_p2pdma_[un]map_sg().
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a netevent callback for cma, mainly to catch NETEVENT_NEIGH_UPDATE.
Previously, when a system with failover MAC mechanism change its MAC address
during a CM connection attempt, the RDMA-CM would take a lot of time till
it disconnects and timesout due to the incorrect MAC address.
Now when we get a NETEVENT_NEIGH_UPDATE we check if it is due to a failover
MAC change and if so, we instantly destroy the CM and notify the user in order
to spare the unnecessary waiting for the timeout.
Link: https://lore.kernel.org/r/bb255c9e301cd50b905663b8e73f7f5133d0e4c5.1654601342.git.leonro@nvidia.com
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Leon Romanovsky says:
====================
Mellanox shared branch that includes:
* Removal of FPGA TLS code https://lore.kernel.org/all/cover.1649073691.git.leonro@nvidia.com
Mellanox INNOVA TLS cards are EOL in May, 2018 [1]. As such, the code
is unmaintained, untested and not in-use by any upstream/distro oriented
customers. In order to reduce code complexity, drop the kernel code,
clean build config options and delete useless kTLS vs. TLS separation.
[1] https://network.nvidia.com/related-docs/eol/LCR-000286.pdf
* Removal of FPGA IPsec code https://lore.kernel.org/all/cover.1649232994.git.leonro@nvidia.com
Together with FPGA TLS, the IPsec went to EOL state in the November of
2019 [1]. Exactly like FPGA TLS, no active customers exist for this
upstream code and all the complexity around that area can be deleted.
[2] https://network.nvidia.com/related-docs/eol/LCR-000535.pdf
* Fix to undefined behavior from Borislav https://lore.kernel.org/all/20220405151517.29753-11-bp@alien8.de
====================
* 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Remove not-implemented IPsec capabilities
net/mlx5: Remove ipsec_ops function table
net/mlx5: Reduce kconfig complexity while building crypto support
net/mlx5: Move IPsec file to relevant directory
net/mlx5: Remove not-needed IPsec config
net/mlx5: Align flow steering allocation namespace to common style
net/mlx5: Unify device IPsec capabilities check
net/mlx5: Remove useless IPsec device checks
net/mlx5: Remove ipsec vs. ipsec offload file separation
RDMA/core: Delete IPsec flow action logic from the core
RDMA/mlx5: Drop crypto flow steering API
RDMA/mlx5: Delete never supported IPsec flow action
net/mlx5: Remove FPGA ipsec specific statistics
net/mlx5: Remove XFRM no_trailer flag
net/mlx5: Remove not-used IDA field from IPsec struct
net/mlx5: Delete metadata handling logic
net/mlx5_fpga: Drop INNOVA IPsec support
IB/mlx5: Fix undefined behavior due to shift overflowing the constant
net/mlx5: Cleanup kTLS function names and their exposure
net/mlx5: Remove tls vs. ktls separation as it is the same
net/mlx5: Remove indirection in TLS build
net/mlx5: Reliably return TLS device capabilities
net/mlx5_fpga: Drop INNOVA TLS support
Link: https://lore.kernel.org/r/20220409055303.1223644-1-leon@kernel.org
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Split out flags from ib_device::device_cap_flags that are only used
internally to the kernel into kernel_cap_flags that is not part of the
uapi. This limits the device_cap_flags to being the same bitmap that will
be copied to userspace.
This cleanly splits out the uverbs flags from the kernel flags to avoid
confusion in the flags bitmap.
Add some short comments describing which each of the kernel flags is
connected to. Remove unused kernel flags.
Link: https://lore.kernel.org/r/0-v2-22c19e565eef+139a-kern_caps_jgg@nvidia.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There are no remaining callers of set_fs(), so CONFIG_SET_FS
can be removed globally, along with the thread_info field and
any references to it.
This turns access_ok() into a cheaper check against TASK_SIZE_MAX.
As CONFIG_SET_FS is now gone, drop all remaining references to
set_fs()/get_fs(), mm_segment_t, user_addr_max() and uaccess_kernel().
Acked-by: Sam Ravnborg <sam@ravnborg.org> # for sparc32 changes
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Tested-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com> # for arc changes
Acked-by: Stafford Horne <shorne@gmail.com> # [openrisc, asm-generic]
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Introduce ib_umem_dmabuf_get_pinned() which allows the driver to get a
dmabuf umem which is pinned and does not require move_notify callback
implementation.
The returned umem is pinned and DMA mapped like standard cpu umems, and is
released through ib_umem_release() (incl. unpinning and unmapping).
Link: https://lore.kernel.org/r/20211012120903.96933-3-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ib_dma_map_sgtable_attrs() should be mapping the sgls and setting nents
but the ib_uses_virt_dma() path falls back to ib_dma_virt_map_sg() which
will not set the nents in the sgtable.
Check the return value (per the map_sg calling convention) and set
sgt->nents appropriately on success.
Fixes: 79fbd3e124 ("RDMA: Use the sg_table directly and remove the opencoded version from umem")
Link: https://lore.kernel.org/r/20211013165942.89806-1-logang@deltatee.com
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
An optional counter is a driver-specific counter that may be dynamically
enabled/disabled. This enhancement allows drivers to expose counters
which are, for example, mutually exclusive and cannot be enabled at the
same time, counters that might degrades performance, optional debug
counters, etc.
Optional counters are marked with IB_STAT_FLAG_OPTIONAL flag. They are not
exported in sysfs, and must be at the end of all stats, otherwise the
attr->show() in sysfs would get wrong indexes for hwcounters that are
behind optional counters.
Link: https://lore.kernel.org/r/20211008122439.166063-7-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Neta Ostrovsky <netao@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
From Maor Gottlieb
====================
Fix the use of nents and orig_nents in the sg table append helpers. The
nents should be used by the DMA layer to store the number of DMA mapped
sges, the orig_nents is the number of CPU sges.
Since the sg append logic doesn't always create a SGL with exactly
orig_nents entries store a total_nents as well to allow the table to be
properly free'd and reorganize the freeing logic to share across all the
use cases.
====================
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
* 'sg_nents':
RDMA: Use the sg_table directly and remove the opencoded version from umem
lib/scatterlist: Fix wrong update of orig_nents
lib/scatterlist: Provide a dedicated function to support table append
orig_nents should represent the number of entries with pages,
but __sg_alloc_table_from_pages sets orig_nents as the number of
total entries in the table. This is wrong when the API is used for
dynamic allocation where not all the table entries are mapped with
pages. It wasn't observed until now, since RDMA umem who uses this
API in the dynamic form doesn't use orig_nents implicit or explicit
by the scatterlist APIs.
Fix it by changing the append API to track the SG append table
state and have an API to free the append table according to the
total number of entries in the table.
Now all APIs set orig_nents as number of enries with pages.
Fixes: 07da1223ec ("lib/scatterlist: Add support in dynamic allocation of SG table from pages")
Link: https://lore.kernel.org/r/20210824142531.3877007-3-maorg@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The rdmavt QP has fields that are both needed for the control and data
path. Such mixed declaration caused to the very specific allocation flow
with kzalloc_node and SGE list embedded into the struct rvt_qp.
This patch separates QP creation to two: regular memory allocation for the
control path and specific code for the SGE list, while the access to the
later is performed through derefenced pointer.
Such pointer and its context are expected to be in the cache, so
performance difference is expected to be negligible, if any exists.
Link: https://lore.kernel.org/r/f66c1e20ccefba0db3c69c58ca9c897f062b4d1c.1627040189.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
init_port was only being used to register sysfs attributes against the
port kobject. Now that all users are creating static attribute_group's we
can simply set the attribute_group list in the ops and the core code can
just handle it directly.
This makes all the sysfs management quite straightforward and prevents any
driver from abusing the naked port kobject in future because no driver
code can access it.
Link: https://lore.kernel.org/r/114f68f3d921460eafe14cea5a80ca65d81729c3.1623427137.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This code creates a 'struct hw_stats_attribute' for each sysfs entry that
contains a naked 'struct attribute' inside.
It then proceeds to attach this same structure to a 'struct device' kobj
and a 'struct ib_port' kobj. However, this violates the typing
requirements. 'struct device' requires the attribute to be a 'struct
device_attribute' and 'struct ib_port' requires the attribute to be
'struct port_attribute'.
This happens to work because the show/store function pointers in all three
structures happen to be at the same offset and happen to be nearly the
same signature. This means when container_of() was used to go between the
wrong two types it still managed to work.
However clang CFI detection notices that the function pointers have a
slightly different signature. As with show/store this was only working
because the device and port struct layouts happened to have the kobj at
the front.
Correct this by have two independent sets of data structures for the port
and device case. The two different attributes correctly include the
port/device_attribute struct and everything from there up is kept
split. The show/store function call chains start with device/port unique
functions that invoke a common show/store function pointer.
Link: https://lore.kernel.org/r/a8b3864b4e722aed3657512af6aa47dc3c5033be.1623427137.git.leonro@nvidia.com
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Maor Gottlieb says:
====================
This series from Maor extends MEMIC to support atomic operations from the
host in addition to already supported regular read/write.
====================
* 'memic_ops':
RDMA/mlx5: Expose UAPI to query DM
RDMA/mlx5: Add support in MEMIC operations
RDMA/mlx5: Add support to MODIFY_MEMIC command
RDMA/mlx5: Re-organize the DM code
RDMA/mlx5: Move all DM logic to separate file
RDMA/uverbs: Make UVERBS_OBJECT_METHODS to consider line number
net/mlx5: Add MEMIC operations related bits
Introduce the ability for kernel ULPs to adjust the minimum RNR Retry
timer. The INIT -> RTR transition executed by RDMA CM will be used for
this adjustment. This avoids an additional ib_modify_qp() call.
rdma_set_min_rnr_timer() must be called before the call to rdma_connect()
on the active side and before the call to rdma_accept() on the passive
side.
The default value of RNR Retry timer is zero, which translates to 655
ms. When the receiver is not ready to accept a send messages, it encodes
the RNR Retry timer value in the NAK. The requestor will then wait at
least the specified time value before retrying the send.
The 5-bit value to be supplied to the rdma_set_min_rnr_timer() is
documented in IBTA Table 45: "Encoding for RNR NAK Timer Field".
Link: https://lore.kernel.org/r/1617216194-12890-2-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
make W=1 warns this:
In file included from drivers/infiniband/sw/rdmavt/mmap.c:51:0:
./include/rdma/uverbs_ioctl.h:937:1:
warning: ‘_uverbs_get_const_unsigned’ defined but not used [-Wunused-function]
_uverbs_get_const_unsigned(u64 *to,
^~~~~~~~~~~~~~~~~~~~~~~~~~
./include/rdma/uverbs_ioctl.h:930:1:
warning: ‘_uverbs_get_const_signed’ defined but not used [-Wunused-function]
_uverbs_get_const_signed(s64 *to, const struct uverbs_attr_bundle *attrs_bundle,
^~~~~~~~~~~~~~~~~~~~~~~~
Make these functions inline to fix this warnings.
Fixes: 2904bb37b3 ("IB/core: Split uverbs_get_const/default to consider target type")
Link: https://lore.kernel.org/r/20210401021028.25720-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
