In the function rxe_create_qp(), rxe_qp_from_init() is called to
initialize qp, internally things like the spin locks are not setup until
rxe_qp_init_req().
If an error occures before this point then the unwind will call
rxe_cleanup() and eventually to rxe_qp_do_cleanup()/rxe_cleanup_task()
which will oops when trying to access the uninitialized spinlock.
Move the spinlock initializations earlier before any failures.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20220731063621.298405-1-yanjun.zhu@linux.dev
Reported-by: syzbot+833061116fa28df97f3b@syzkaller.appspotmail.com
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently the requester can continue to process send wqes after an local
qp operation error is detected because the setting of the qp state to the
error state is deferred until later. This patch splits the qp state for
the completer and requester into two separate states and sets
qp->req.state = QP_STATE_ERROR as soon as the error is detected before
another wqe can be executed.
Link: https://lore.kernel.org/r/1658307368-1851-4-git-send-email-lizhijian@fujitsu.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
As per IBTA specification, all subsequent WQEs while QP is in error state
should be completed with a flush error.
Here we check QP_STATE_ERROR after req_next_wqe() so that rxe_completer()
has chance to be called where it will set CQ state to FLUSH ERROR and the
completion can associate with its WQE.
Link: https://lore.kernel.org/r/1658307368-1851-3-git-send-email-lizhijian@fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Previously, if user space keeps sending abnormal wqe, queue.index will
keep increasing while qp->req.wqe_index doesn't. Once
qp->req.wqe_index==queue.index in next round, req_next_wqe() will treat
queue as empty. In such case, no new completion would be generated.
Update wqe_index for each wqe completion so that req_next_wqe() can get
next wqe properly.
Link: https://lore.kernel.org/r/1658307368-1851-2-git-send-email-lizhijian@fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In rxe_req.c replace calls to __rxe_do_task() by calls to rxe_run_task(..,
0). Using __rxe_do_task is an error because the completer tasklet is not
designed to be re-entrant and __rxe_do_task() should only be called when
it is clear that no one else could be calling the completer tasklet as is
the case in rxe_qp.c where this call is used in safe environments.
Link: https://lore.kernel.org/r/20220630190425.2251-10-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Limit the maximum number of calls to each tasklet from rxe_do_task()
before yielding the cpu. When the limit is reached reschedule the tasklet
and exit the calling loop. This patch prevents one tasklet from consuming
100% of a cpu core and causing a deadlock or soft lockup.
Link: https://lore.kernel.org/r/20220630190425.2251-9-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The code thc that decides whether to defer execution of a wqe in
rxe_requester.c is isolated into a subroutine rxe_is_fenced() and removed
from the call to req_next_wqe(). The condition whether a wqe should be
fenced is changed to comply with the IBA. Currently an operation is fenced
if the fence bit is set in the wqe flags and the last wqe has not
completed. For normal operations the IBA actually only requires that the
last read or atomic operation is complete.
Link: https://lore.kernel.org/r/20220630190425.2251-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The 'rkey' input can be an lkey or rkey, and in rxe the lkey or rkey have
the same value, including the variant bits.
So, if mr->rkey is set, compare the invalidate key with it, otherwise
compare with the mr->lkey.
Since we already did a lookup on the non-varient bits to get this far, the
check's only purpose is to confirm that the wqe has the correct variant
bits.
Fixes: 001345339f ("RDMA/rxe: Separate HW and SW l/rkeys")
Link: https://lore.kernel.org/r/20220707073006.328737-1-haris.phnx@gmail.com
Signed-off-by: Md Haris Iqbal <haris.phnx@gmail.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is a spelling mistake (writeable) in function rxe_check_bind_mw.
Fix it.
Signed-off-by: Zhang Jiaming <jiaming@nfschina.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The function rxe_create_qp calls rxe_qp_from_init. If some error
occurs, the error handler of function rxe_qp_from_init will set
both scq and rcq to NULL.
Then rxe_create_qp calls rxe_put to handle qp. In the end,
rxe_qp_do_cleanup is called by rxe_put. rxe_qp_do_cleanup directly
accesses scq and rcq before checking them. This will cause
null-ptr-deref error.
The call graph is as below:
rxe_create_qp {
...
rxe_qp_from_init {
...
err1:
...
qp->rcq = NULL; <---rcq is set to NULL
qp->scq = NULL; <---scq is set to NULL
...
}
qp_init:
rxe_put{
...
rxe_qp_do_cleanup {
...
atomic_dec(&qp->scq->num_wq); <--- scq is accessed
...
atomic_dec(&qp->rcq->num_wq); <--- rcq is accessed
}
}
Fixes: 4703b4f0d9 ("RDMA/rxe: Enforce IBA C11-17")
Link: https://lore.kernel.org/r/20220705225414.315478-1-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
If siw_recv_mpa_rr returns -EAGAIN, it means that the MPA reply hasn't
been received completely, and should not report IW_CM_EVENT_CONNECT_REPLY
in this case. This may trigger a call trace in iw_cm. A simple way to
trigger this:
server: ib_send_lat
client: ib_send_lat -R <server_ip>
The call trace looks like this:
kernel BUG at drivers/infiniband/core/iwcm.c:894!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<...>
Workqueue: iw_cm_wq cm_work_handler [iw_cm]
Call Trace:
<TASK>
cm_work_handler+0x1dd/0x370 [iw_cm]
process_one_work+0x1e2/0x3b0
worker_thread+0x49/0x2e0
? rescuer_thread+0x370/0x370
kthread+0xe5/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 6c52fdc244 ("rdma/siw: connection management")
Link: https://lore.kernel.org/r/dae34b5fd5c2ea2bd9744812c1d2653a34a94c67.1657706960.git.chengyou@linux.alibaba.com
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When a local operation (invalidate mr, reg mr, bind mw) is finished there
will be no ack packet coming from a responder to cause the wqe to be
completed. This may happen anyway if a subsequent wqe performs
IO. Currently if the wqe is signalled the completer tasklet is scheduled
immediately but not otherwise.
This leads to a deadlock if the next wqe has the fence bit set in send
flags and the operation is not signalled. This patch removes the condition
that the wqe must be signalled in order to schedule the completer tasklet
which is the simplest fix for this deadlock and is fairly low cost. This
is the analog for local operations of always setting the ackreq bit in all
last or only request packets even if the operation is not signalled.
Link: https://lore.kernel.org/r/20220523223251.15350-1-rpearsonhpe@gmail.com
Reported-by: Jenny Hack <jhack@hpe.com>
Fixes: c1a411268a ("RDMA/rxe: Move local ops to subroutine")
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Make the execution of the atomic operation in rxe_atomic_reply()
conditional on res->replay and make duplicate_request() call into
rxe_atomic_reply() to merge the two flows. This is modeled on the behavior
of read reply. Delete the skb from the atomic responder resource since it
is no longer used. Adjust the reference counting of the qp in
send_atomic_ack() for this flow.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20220606143836.3323-6-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently the rdma_rxe driver has a security weakness due to giving
objects which are partially initialized indices allowing external actors
to gain access to them by sending packets which refer to their
index (e.g. qpn, rkey, etc) causing unpredictable results.
This patch adds a new API rxe_finalize(obj) which enables looking up pool
objects from indices using rxe_pool_get_index() for AH, QP, MR, and
MW. They are added in create verbs only after the objects are fully
initialized.
It also adds wait for completion to destroy/dealloc verbs to assure that
all references have been dropped before returning to rdma_core by
implementing a new rxe_pool API rxe_cleanup() which drops a reference to
the object and then waits for all other references to be dropped. When
the last reference is dropped the object is completed by kref. After that
it cleans up the object and if locally allocated frees the memory. In the
special case of address handle objects the delay is implemented separately
if the destroy_ah call is not sleepable.
Combined with deferring cleanup code to type specific cleanup routines
this allows all pending activity referring to objects to complete before
returning to rdma_core.
Link: https://lore.kernel.org/r/20220612223434.31462-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In the tasklets (completer, responder, and requester) check the return
value from rxe_get() to detect failures to get a reference. This only
occurs if the qp has had its reference count drop to zero which indicates
that it no longer should be used.
The ref is never 0 today because the tasklets are flushed before the ref
is dropped. The next patch changes this so that the ref is dropped then
the tasklets are flushed.
Link: https://lore.kernel.org/r/20220421014042.26985-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently the #define IB_SRQ_INIT_MASK is used to distinguish the
rxe_create_srq verb from the rxe_modify_srq verb so that some code can be
shared between these two subroutines.
This commit splits rxe_srq_chk_attr into two subroutines: rxe_srq_chk_init
and rxe_srq_chk_attr which handle the create_srq and modify_srq verbs
separately.
Link: https://lore.kernel.org/r/20220421014042.26985-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_mcast.c currently uses _irqsave spinlocks for rxe->mcg_lock while
rxe_recv.c uses _bh spinlocks for the same lock.
As there is no case where the mcg_lock can be taken from an IRQ, change
these all to bh locks so we don't have confusing mismatched lock types on
the same spinlock.
Fixes: 6090a0c4c7 ("RDMA/rxe: Cleanup rxe_mcast.c")
Link: https://lore.kernel.org/r/20220504202817.98247-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
These routines were not intended to be called under a spinlock and will
throw debugging warnings:
raw_local_irq_restore() called with IRQs enabled
WARNING: CPU: 13 PID: 3107 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x2f/0x50
CPU: 13 PID: 3107 Comm: python3 Tainted: G E 5.18.0-rc1+ #7
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
RIP: 0010:warn_bogus_irq_restore+0x2f/0x50
Call Trace:
<TASK>
_raw_spin_unlock_irqrestore+0x75/0x80
rxe_attach_mcast+0x304/0x480 [rdma_rxe]
ib_attach_mcast+0x88/0xa0 [ib_core]
ib_uverbs_attach_mcast+0x186/0x1e0 [ib_uverbs]
ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xcd/0x140 [ib_uverbs]
ib_uverbs_cmd_verbs+0xdb0/0xea0 [ib_uverbs]
ib_uverbs_ioctl+0xd2/0x160 [ib_uverbs]
do_syscall_64+0x5c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Move them out of the spinlock, it is OK if there is some races setting up
the MC reception at the ethernet layer with rbtree lookups.
Fixes: 6090a0c4c7 ("RDMA/rxe: Cleanup rxe_mcast.c")
Link: https://lore.kernel.org/r/20220504202817.98247-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The calling of siw_cm_upcall and detaching new_cep with its listen_cep
should be atomistic semantics. Otherwise siw_reject may be called in a
temporary state, e,g, siw_cm_upcall is called but the new_cep->listen_cep
has not being cleared.
This fixes a WARN:
WARNING: CPU: 7 PID: 201 at drivers/infiniband/sw/siw/siw_cm.c:255 siw_cep_put+0x125/0x130 [siw]
CPU: 2 PID: 201 Comm: kworker/u16:22 Kdump: loaded Tainted: G E 5.17.0-rc7 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: iw_cm_wq cm_work_handler [iw_cm]
RIP: 0010:siw_cep_put+0x125/0x130 [siw]
Call Trace:
<TASK>
siw_reject+0xac/0x180 [siw]
iw_cm_reject+0x68/0xc0 [iw_cm]
cm_work_handler+0x59d/0xe20 [iw_cm]
process_one_work+0x1e2/0x3b0
worker_thread+0x50/0x3a0
? rescuer_thread+0x390/0x390
kthread+0xe5/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 6c52fdc244 ("rdma/siw: connection management")
Link: https://lore.kernel.org/r/d528d83466c44687f3872eadcb8c184528b2e2d4.1650526554.git.chengyou@linux.alibaba.com
Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In finish_packet() in rxe_req.c a variable was incorrectly called paylen
instead of payload. Elsewhere in the rxe source payload is always used for
the RoCE payload length and paylen is always used for the UDP payload
length. This will cause unnecessary confusion.
Replace paylen by payload in finish_packet().
Link: https://lore.kernel.org/r/20220420172316.5465-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
