Let's replace the assortment of intel_gt_* and intel_uncore_* functions
that operate on MCR registers with a cleaner set of interfaces:
* intel_gt_mcr_read -- unicast read from specific instance
* intel_gt_mcr_read_any[_fw] -- unicast read from any non-terminated
instance
* intel_gt_mcr_unicast_write -- unicast write to specific instance
* intel_gt_mcr_multicast_write[_fw] -- multicast write to all instances
We'll also replace the historic "slice" and "subslice" terminology with
"group" and "instance" to match the documentation for more recent
platforms; these days MCR steering applies to more types of replication
than just slice/subslice.
v2:
- Reference the new kerneldoc from i915.rst. (Jani)
- Tweak the wording of the documentation for a couple functions to
clarify the difference between "_fw" and non-"_fw" forms.
v3:
- s/read/write/ to fix copy-paste mistake in a couple comments.
(Harish)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615001019.1821989-3-matthew.d.roper@intel.com
Handling of multicast/replicated registers is spread across intel_gt.c
and intel_uncore.c today. As multicast handling and the related
steering logic gets more complicated with the addition of new platforms
and new rules it makes sense to centralize it all in one place.
For now the existing functions have been moved to the new .c/.h as-is.
Function renames and updates to operate in a more consistent manner will
be done in subsequent patches.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615001019.1821989-2-matthew.d.roper@intel.com
Ponte Vecchio no longer has MSLICE or LNCF steering, but the bspec does
document several new types of multicast register ranges. Fortunately,
most of the different MCR types all provide valid values at instance
(0,0) so there's no need to read fuse registers and calculate a
non-terminated instance. We'll lump all of those range types (BSLICE,
HALFBSLICE, TILEPSMI, CC, and L3BANK) into a single category called
"INSTANCE0" to keep things simple. We'll also perform explicit steering
for each of these multicast register types, even if the implicit
steering setup for COMPUTE/DSS ranges would have worked too; this is
based on guidance from our hardware architects who suggested that we
move away from implicit steering and start explicitly steer all MCR
register accesses on modern platforms (we'll work on transitioning
COMPUTE/DSS to explicit steering in the future).
Note that there's one additional MCR range type defined in the bspec
(SQIDI) that we don't handle here. Those ranges use a different
steering control register that we never touch; since instance 0 is also
always a valid setting there, we can just ignore those ranges.
Finally, we'll rename the HAS_MSLICES() macro to HAS_MSLICE_STEERING().
PVC hardware still has units referred to as mslices, but there's no
register steering based on mslice for this platform.
v2:
- Rebase on other recent changes
- Swap two table rows to keep table sorted & easy to read. (Harish)
Bspec: 67609
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220608170700.4026648-1-matthew.d.roper@intel.com
A new PVC+DG2 workaround has appeared recently:
- Wa_16015675438
And a couple existing DG2 workarounds have been extended to PVC:
- Wa_14015795083
- Wa_18018781329
Note that Wa_16015675438 asks us to program a register that is in the
0x2xxx range typically associated with the RCS engine, even though PVC
does not have an RCS. By default the GuC will think we've made a
mistake and throw an exception when it sees this register on a CCS
engine's save/restore list, so we need to pass an extra GuC control flag
to tell it that this is expected and not a problem.
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220608005108.3717895-1-matthew.d.roper@intel.com
As with EU masks, it's easier to store subslice/DSS masks internally in
a format that's more natural for the driver to work with, and then only
covert into the u8[] uapi form when the query ioctl is invoked. Since
the hardware design changed significantly with Xe_HP, we'll use a union
to choose between the old "hsw-style" subslice masks or the newer xehp
mask. HSW-style masks will be stored in an array of u8's, indexed by
slice (there's never more than 6 subslices per slice on older
platforms). For Xe_HP and beyond where slices no longer exist, we only
need a single bitmask. However we already know that this mask is
eventually going to grow too large for a simple u64 to hold, so we'll
represent it in a manner that can be operated on by the utilities in
linux/bitmap.h.
v2:
- Fix typo: BIT(s) -> BIT(ss) in gen9_sseu_device_status()
v3:
- Eliminate sseu->ss_stride and just calculate the stride while
specifically handling uapi. (Tvrtko)
- Use BITMAP_BITS() macro to refer to size of masks rather than
passing I915_MAX_SS_FUSE_BITS directly. (Tvrtko)
- Report compute/geometry DSS masks separately when dumping Xe_HP SSEU
info. (Tvrtko)
- Restore dropped range checks to intel_sseu_has_subslice(). (Tvrtko)
v4:
- Make the bitmap size macro check the size of the .xehp field rather
than the containing union. (Tvrtko)
- Don't add GEM_BUG_ON() intel_sseu_has_subslice()'s check for whether
slice or subslice ID exceed sseu->max_[sub]slices; various loops
in the driver are expected to exceed these, so we should just
silently return 'false.'
v5:
- Move XEHP_BITMAP_BITS() to the header so that we can also replace a
usage of I915_MAX_SS_FUSE_BITS in one of the inline functions.
(Bala)
- Change the local variable in intel_slicemask_from_xehp_dssmask() from
u16 to 'unsigned long' to make it a bit more future-proof.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601150725.521468-6-matthew.d.roper@intel.com
Add a new 'steering' node in each gt's debugfs directory that tells
whether we're using explicit steering for various types of MCR ranges
and, if so, what MMIO ranges it applies to.
We're going to be transitioning away from implicit steering, even for
slice/dss steering soon, so the information reported here will become
increasingly valuable once that happens.
v2:
- Adding missing 'static' on intel_steering_types[] (Jose, sparse)
v3:
- "static const char *" -> "static const char * const" (sparse)
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315170250.954380-1-matthew.d.roper@intel.com
In the past we've always assumed that an RCS engine is present on every
platform. However now that we have compute engines there may be
platforms that have CCS engines but no RCS, or platforms that are
designed to have both, but have the RCS engine fused off.
Various engine-centric initialization that only needs to be done a
single time for the group of RCS+CCS engines can't rely on being setup
with the RCS now; instead we add a I915_ENGINE_FIRST_RENDER_COMPUTE flag
that will be assigned to a single engine in the group; whichever engine
has this flag will be responsible for some of the general setup
(RCU_MODE programming, initialization of certain workarounds, etc.).
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303223435.2793124-1-matthew.d.roper@intel.com
Additional workarounds are required once we start exposing CCS engines.
Note that we have a number of workarounds that update registers in the
shared render/compute reset domain. Historically we've just added such
registers to the RCS engine's workaround list. But going forward we
should be more careful to place such workarounds on a wa_list for an
engine that definitely exists and is not fused off (e.g., a platform
with no RCS would never apply the RCS wa_list). We'll keep
rcs_engine_wa_init() focused on RCS-specific workarounds that only need
to be applied if the RCS engine is present. A separate
general_render_compute_wa_init() function will be used to define
workarounds that touch registers in the shared render/compute reset
domain and that we need to apply regardless of what render and/or
compute engines actually exist. Any workarounds defined in this new
function will internally be added to the first present RCS or CCS
engine's workaround list to ensure they get applied (and only get
applied once rather than being needlessly re-applied several times).
Co-author: Srinivasan Shanmugam
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-13-matthew.d.roper@intel.com
UAPI Changes:
- Weak parallel submission support for execlists
Minimal implementation of the parallel submission support for
execlists backend that was previously only implemented for GuC.
Support one sibling non-virtual engine.
Core Changes:
- Two backmerges of drm/drm-next for header file renames/changes and
i915_regs reorganization
Driver Changes:
- Add new DG2 subplatform: DG2-G12 (Matt R)
- Add new DG2 workarounds (Matt R, Ram, Bruce)
- Handle pre-programmed WOPCM registers for DG2+ (Daniele)
- Update guc shim control programming on XeHP SDV+ (Daniele)
- Add RPL-S C0/D0 stepping information (Anusha)
- Improve GuC ADS initialization to work on ARM64 on dGFX (Lucas)
- Fix KMD and GuC race on accessing PMU busyness (Umesh)
- Use PM timestamp instead of RING TIMESTAMP for reference in PMU with GuC (Umesh)
- Report error on invalid reset notification from GuC (John)
- Avoid WARN splat by holding RPM wakelock during PXP unbind (Juston)
- Fixes to parallel submission implementation (Matt B.)
- Improve GuC loading status check/error reports (John)
- Tweak TTM LRU priority hint selection (Matt A.)
- Align the plane_vma to min_page_size of stolen mem (Ram)
- Introduce vma resources and implement async unbinding (Thomas)
- Use struct vma_resource instead of struct vma_snapshot (Thomas)
- Return some TTM accel move errors instead of trying memcpy move (Thomas)
- Fix a race between vma / object destruction and unbinding (Thomas)
- Remove short-term pins from execbuf (Maarten)
- Update to GuC version 69.0.3 (John, Michal Wa.)
- Improvements to GT reset paths in GuC backend (Matt B.)
- Use shrinker_release_pages instead of writeback in shmem object hooks (Matt A., Tvrtko)
- Use trylock instead of blocking lock when freeing GEM objects (Maarten)
- Allocate intel_engine_coredump_alloc with ALLOW_FAIL (Matt B.)
- Fixes to object unmapping and purging (Matt A)
- Check for wedged device in GuC backend (John)
- Avoid lockdep splat by locking dpt_obj around set_cache_level (Maarten)
- Allow dead vm to unbind vma's without lock (Maarten)
- s/engine->i915/i915/ for DG2 engine workarounds (Matt R)
- Use to_gt() helper for GGTT accesses (Michal Wi.)
- Selftest improvements (Matt B., Thomas, Ram)
- Coding style and compiler warning fixes (Matt B., Jasmine, Andi, Colin, Gustavo, Dan)
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yg4i2aCZvvee5Eai@jlahtine-mobl.ger.corp.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Fixed conflicts while applying, using the fixups/drm-intel-gt-next.patch
from drm-rerere's 1f2b1742abdd ("2022y-02m-23d-16h-07m-57s UTC: drm-tip
rerere cache update")]
Registers that belong to the shared render/compute reset domain need to
be placed on an engine workaround list to ensure that they are properly
re-applied whenever any RCS or CCS engine is reset, even if the
registers do not belong to a specific engine's MMIO range. We have a
number of workarounds today that are incorrectly implemented on the 'gt'
workaround list and need to be moved accordingly. We also have one
workaround (Wa_22012532006) that is incorrectly implemented on the
context workaround list, even though the register it is adjusting is not
part of the RCS engine's context image; it must also be moved.
We'll have some workaround refactoring coming in the near future that
deals with registers in the reset domain in a more clear way. But in
the meantime, we should just move these workarounds to
rcs_engine_wa_init() to place them on the RCS engine's workaround list.
All production DG2 platforms will have an RCS engine (it's never fused
off) so these registers will be properly restored after a domain reset
triggered via an RCS engine _or_ a CCS engine.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.s@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215235531.2236399-1-matthew.d.roper@intel.com
Another fork of the DG2 design has appeared, known as "DG2-G12;" let's
add it as a new subplatform. As with G11, the GT stepping resets back
to A0 (so a DG2-G12 A0 is similar, but not identical, to a DG2-G10 C0)
but the display steppings continue to use the same numbering scheme as
G10 and G11.
Some existing DG2 workarounds are starting to be extended to the DG2-G12
subplatform. So far only workarounds that were "permanent" for both
DG2-G10 and DG2-G11 have been tagged for DG2-G12, but more
stepping-specific workarounds are likely to show up in the future.
Bspec: 44477
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120235016.1209326-1-matthew.d.roper@intel.com
Catch-up with 5.17-rc2 and trying to align with drm-intel-gt-next
for a possible topic branch for merging the split of i915_regs...
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Pre-HSW platforms don't use the gt SSEU structures; this means that
calling intel_sseu_get_subslices() on slice 0 for these platforms will
trip a GEM_BUG_ON(slice >= sseu->max_slices) warning.
Let's move the DSS lookup for a DG2 workaround into a helper function
that will only get called after we've already decided that we're on a
DG2 platform.
Fixes: 645cc0b9d9 ("drm/i915/dg2: Add initial gt/ctx/engine workarounds")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112160107.1593906-1-matthew.d.roper@intel.com
A recent restructuring of our context workaround list initialization
added an early return for non-render engines; this caused us to
potentially miss the wa_init_finish() call at the end of the function.
The mistake is pretty harmless --- the only impact is that non-render
engines on graphics version 12.50+ platforms we don't trim down the
workaround list to reclaim some memory, and we don't print the usual
"Initialized 1 context workaround" message in dmesg. Let's change the
early return to a jump down to the wa_init_finish() call at the bottom
of the function.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Fixes: 9e9dfd0802 ("drm/i915/dg2: Maintain backward-compatible nested batch behavior")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210826033559.1209020-1-matthew.d.roper@intel.com
